Chemie und Prozesstechnik
Filtern
Erscheinungsjahr
- 2019 (69) (entfernen)
Dokumenttyp
Schlagworte
- Nanoparticles (15)
- XPS (13)
- EPMA (10)
- Electron microscopy (6)
- NAP-XPS (5)
- Traceability (5)
- VAMAS (5)
- Electron probe microanalysis (EPMA) (4)
- NEXAFS (4)
- Particle size distribution (4)
- Reference materials (4)
- Thin films (4)
- ToF-SIMS (4)
- Fe-Ni (3)
- Si-Ge (3)
- Spectroscopic ellipsometry (3)
- Standardisation (3)
- Thin film analysis (3)
- Titanium dioxide (3)
- ATR-FTIR spectroscopy (2)
- Biofilms (2)
- Core-shell nanoparticles (2)
- Data (2)
- Electron probe microanalysis (2)
- Ellipsometry (2)
- FeNi (2)
- HKUST-1 (2)
- ISO (2)
- Inter-laboratory comparison (2)
- Iridium-titanium mixed oxides (2)
- MOF (2)
- Mesoporous thin films (2)
- Microanalysis (2)
- Microbeam analysis (2)
- Molecular sieves (2)
- NanoSIMS (2)
- Nanomaterial (2)
- Nanomaterials (2)
- Non-spherical shape (2)
- Pre-standardisation (2)
- Reference material (2)
- SEM/EDS (2)
- SiGe (2)
- Surface functionalization (2)
- Test material (2)
- Uncertainties (2)
- X-ray Photoelectron Spectroscopy (XPS) (2)
- XRF (2)
- µ-XRF (2)
- (ter-)pyridineterminated self-assembled monolayer (1)
- Advanced Materials (1)
- Advanced materials (1)
- Agarose (1)
- Ageing (1)
- Anatase (1)
- Anomalous Small Angle X-ray Scattering (1)
- Antibacterial surface coatings (1)
- Antifouling surface coatings (1)
- Antiviral activity (1)
- Atomic force microscopy (1)
- Atomic fraction (1)
- Auger Electron Spectroscopy (1)
- BSA (1)
- Bacteria (1)
- Biochip (1)
- Biosensors (1)
- Boehmite nanoparticles (1)
- Bovine serum albumin (1)
- Categorisation scheme (1)
- Certified reference materials (1)
- Cleaning (1)
- Click chemistry (1)
- Comparability of Measurement Results (1)
- Controlled-shape (1)
- Crosslinking density (1)
- CuO nanoparticles (1)
- Cytotoxicity (1)
- Decision support (1)
- Definition of nanomaterial (1)
- E. coli (1)
- EBSD (1)
- EC definition of a nanomaterial (1)
- EC nanomaterial definition (1)
- EDS (1)
- EDS X-ray spectrometer (1)
- EDS performance check (1)
- EMPIR (1)
- ESCA/XPS (1)
- Electrochemical sensing (1)
- Elemental composition (1)
- Ellipsometric porosimetry (1)
- Epoxy (1)
- Expert system (1)
- Ferrihydrite (1)
- Field of Analysis (1)
- Fluorescence correction (1)
- Fluoride (1)
- Functionalized nanographene (1)
- Genotoxic and oxidative damage (1)
- Goethite (1)
- Graphene (1)
- Green rust (1)
- Grouping (1)
- H-terminated Si3N4 films (1)
- High-throughput screening (1)
- Human umbilical cell adhesion (1)
- Hydrogen generation (1)
- Hydrogen photoproduction (1)
- Hydrothermal synthesis (1)
- Iinter-laboratory comparison (1)
- Imaging (1)
- Infrared nano AFM (1)
- Intermodulation (1)
- Intermodulation AFM (1)
- International Meter Convention (1)
- Interphase (1)
- Iodine (1)
- Ionic liquid (1)
- Iridium oxide (1)
- Layer-by-layer deposition (1)
- Linear polyglycerol (1)
- Marble sculptures (1)
- Mesoporous films (1)
- Mesoporous iridium-titanium mixed oxides (1)
- Mesoporous mixed metal oxide films (1)
- Metal organic frameworks (1)
- Metrology (1)
- Mineral tranformation (1)
- Mussel-inspired adhesives (1)
- Mussel-inspired dendritic polyglycerol (MI-dPG) (1)
- Nanocomposites (1)
- Nanomaterial Properties (1)
- Nanomaterialien (1)
- Nanomechanical properties (1)
- Nanometrology (1)
- Nanoparticle Characterization (1)
- Nanoscale (1)
- Nanostructured material (1)
- Near edge X-ray absorption fine structure (1)
- Near-ambient pressure (1)
- Neuartige Materialien (1)
- Nitrene[2+1]cycloaddition (1)
- Non-spherical (1)
- Oberflächenanalytik (1)
- Oberflächenmesstechnik (1)
- Oxygen evolution reaction (1)
- P25 (1)
- PC characterisation (1)
- Performance check (1)
- Photooxidation (1)
- Photoswitchable monolayers (1)
- Plasma (1)
- Platinum (1)
- Polyethylene glycol (1)
- Polyethylene glycol (PEG)-grafting antifouling surface (1)
- Polymers (1)
- Porosity (1)
- Porous layers (1)
- Post-modification by L-cysteine (1)
- Preparation (1)
- Principal component analysis (PCA) (1)
- Qualitätssicherung (1)
- Quantitative XPS (1)
- Raman spectroscopy (1)
- Reference Nanomaterials (1)
- Regulation (1)
- Regulatory identification of nanomaterials (1)
- Regulatory risk assesment (1)
- Risk assessment (1)
- SEM/EDS/STRATAGem (1)
- SIMS (1)
- Secondary fluorescence (1)
- Secondary fluorescence correction (1)
- Selected Area XPS (1)
- Shape-engineered (1)
- Silver nanoparticles (1)
- Size distribution (1)
- Small Area XPS (1)
- Small Spot XPS (1)
- Software (1)
- Sonochemical synthesis (1)
- Spectrometer check (1)
- Stand der Normung (1)
- Standardization (1)
- Streptavidin binding (1)
- Surface (1)
- Surface Chemistry (1)
- Surface analyses (1)
- Surface analytic (1)
- Surface characterization (1)
- Surface chemical analysis (1)
- T-SEM (1)
- TiO2 (1)
- Titanium Dioxide (1)
- Toxicology (1)
- Transmission function (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Wastewater (1)
- X-ray Photoelectron Spectroscopy (1)
- X-ray absorption Fine Spectroscopy (1)
- X-ray detectors (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrometry (1)
- X-ray spectroscopy (1)
- XAS (1)
- XPS background analysis (1)
- shape control (1)
Organisationseinheit der BAM
- 6.1 Oberflächen- und Dünnschichtanalyse (69) (entfernen)
Eingeladener Vortrag
- nein (29)
Biofouling constitutes a major challenge in the application of biosensors and biomedical implants, as well as for (food) packaging and marine equipment. In this work, an antifouling surface coating based on the combination of mussel-inspired dendritic polyglycerol (MI-dPG) and an amine-functionalized block copolymer of linear polyglycerol (lPG−b−OA11, OA = oligo-amine) was developed. The coating was compared to a MI-dPG surface which was postfunctionalized with commercially available amine-terminated Polyethylene glycol (HO−PEG−NH2) of similar molecular weight. In the current work, These coatings were compared in their chemical stability, protein fouling characteristics, and cell fouling characteristics. The lPG−b−OA11-functionalized coating showed high chemical stability in both phosphate buffered saline (PBS) and sodium dodecyl sulfate (SDS) solutions and reduced the adhesion of fibrinogen from human plasma with 99% and the adhesion of human serum albumin with 96%, in comparison to the bare titanium dioxide substrate. Furthermore, the Proliferation of human umbilical vein endothelial cells (HUVECs) was reduced with 85% when the lPG−b−OA11 system was compared to bare titanium dioxide. Additionally, a reduction of 94% was observed when the lPG−b−OA11 system was compared to tissue culture polystyrene.
This talk was given within the scope of the SIMS-22 conference in October 2019 in Kyoto (Japan). It deals with the surface analytical investigation of nanoparticles by PCS-assisted ToF-SIMS. This technique is applicable to core-shell nanoparticles, in order to distinguish a complete encapsulation from an incomplete encapsulation of the core by the shell material. Furthermore, the depletion process of organic nanoparticle coatings caused by UV-weathering is investigated. Finally, the significance of grouping studies for nanomaterials research and risk assessment is demonstrated.
Challenges in Traceable Size Measurement of Non-Spherical, Non-Monodisperse Nanoparticles - nPSize
(2019)
Size measurement of nanoparticles (NP) becomes a challenging analytical problem when non-spherical shapes must be traceably measured. However, most industrial NPs have irregular shapes and broad size distribution making it often more complex to follow European regulatory to identify a material as a nanomaterial according to which accurate measurement of the smallest dimension and its size Distribution is necessary.
The European research project nPSize - Improved traceability chain of nanoparticle size measurements aims to fill this gap by developing potential non-spherical reference nanoparticles, measurement procedures and physical modelling to improve the traceability chain, comparability and compatibility for NP size measurements between different methods. Therefore, new model NP with well-controlled shape has been synthesized and are supposed to be systematically characterized using the traceable methods scanning/transmission electron microscopy, atomic force microscopy and small angle X-ray scattering.
Following NP candidates are under investigation with respect to their homogeneity and stability: (i) titania nanoplatelets (10-15 nm thickness x 50-100 nm lateral), (ii) titania bipyramides (~60 nm length x 40 nm width), (iii) titania acicular particles (100 nm length x 15-20 nm width; aspect ratio 5.5/6), (iv) gold nanorods (~10 nm width x 30 nm length), and (v) gold nanocubes (~55 nm x 55 nm x 55 nm). In addition, sample preparation procedures as well as measurement analysis procedures with evaluation of appropriate measurands and descriptors for each material class and method are being developed to support standardization. To underpin the traceability of the size measurement of nonspherical NP, physical modelling of the signals in e.g. electron microscopy techniques will be used and in combination, the implementation of machine learning is aimed to facilitate measurement Analysis procedures, especially regarding the accurate thresholding/segmentation of the NPs.zeige mehr
Titanium dioxide is one of the most studied metal oxides due to its chemical, surface, electronic and (photo)catalytic properties, providing this material of multisectorial applications ranging from healthcare, photocatalysis, smart materials with self cleaning and self sterilizing properties and solar energy harvesting. However it is difficult to correlate the functional properties of TiO2 nanomaterials to the properties at single nanoparticle level due to the high polydispersity in shape, size and surface features of the currently available TiO2 nanoparticles (NPs). Although intensive experimental and theoretical studies have been conducted on the reactivity of different surfaces of metal oxides such as TiO2 much less attention is paid on the dependence of functional properties, like photocatalytic activity, dye adsorption, open circuit potential and fill factor in dye sensitized solar cells, on crystal facets in different orientations. One of the goal of SETNanoMetro project was the development of design rules to tune crystal facets of TiO2 NPs in order to optimize and control functional properties. In the present work we have developed a series of design rules in order to obtain sets of anatase TiO2 NPs with low polydispersity and to tune their shape and size by hydrothermal processing of Ti(IV)-
Triethanolamine complex in presence of different shape controllers. Through a careful experimental design, a predictive soft model was developed. The model is able to predict the synthesis outcome allowing to tune the shape factor from 5 (prisms) to 1.5 (bipyramids) to 0.2 (platelets). This allows to control the main crystal facets exposed ranging from (100) to (001). Due to the dependence of functional properties of nanomaterials on shape distribution and not only size, the availability of NPs sets with uniform and well defined and tunable shapes can be of paramount relevance in order to produce reference nanomaterials for shape measurement.
The European Commission's recommendation on the definition of nanomaterial [2011/696/EU] is broadly applicable across different regulatory sectors and requires the quantitative size Determination of constituent particles in samples down to 1 nm. A material is a nanomaterial if 50 % or more of the particles are in the size range 1-100 nm. The implementation of the definition in a regulatory context challenges measurement methods to reliably identify nanomaterials and ideally also nonnanomaterials as substance or product ingredient as well as in various matrices.
The EU FP7 NanoDefine project [www.nanodefine.eu] addressed these challenges by developing a robust, readily implementable and cost-effective measurement strategy to decide for the widest possible range of materials whether it is a nanomaterial or not. It is based on existing and emerging particle measurement techniques evaluated against harmonized, material-dependent performance criteria and by intra- and inter-lab comparisons. Procedures were established to reliably measure the size of particles within 1-100 nm, and beyond, taking into account different shapes, coatings and chemical compositions in industrial materials and consumer products. Case studies prove their applicability for various sectors, including food, pigments and cosmetics.
A main outcome is the establishment of an integrated tiered approach including rapid screening (Tier 1) and confirmatory methods (tier 2), a decision support flow scheme and a user manual to guide end-users, such as manufacturers, in selecting appropriate methods. Another main product is the “NanoDefiner” e-Tool which implements the flow scheme in a user-friendly software and guides the user in a semi-automated way through the entire decision procedure. It allows a cost-effective selection of appropriate methods for material classification according to the EC's nanomaterial definition and provides a comprehensive report with extensive explanation of all decision steps to arrive at a transparent identification of nanomaterials as well as non-nanomaterials for regulatory
purposes.
Core–shell nanoparticles (CSNPs) have become indispensable in various industrial applications. However, their real internal structure usually deviates from an ideal core–shell structure. To control how the particles perform with regard to their specific applications, characterization techniques are required that can distinguish an ideal from a nonideal morphology. In this work, we investigated poly(tetrafluoroethylene)–poly(methyl methacrylate) (PTFE–PMMA) and poly(tetrafluoroethylene)–polystyrene (PTFE–PS) polymer CSNPs with a constant core diameter (45 nm) but varying shell thicknesses (4–50 nm). As confirmed by transmission scanning electron microscopy (T-SEM), the shell completely covers the core for the PTFE–PMMA nanoparticles, while the encapsulation of the core by the shell material is incomplete for the PTFE–PS nanoparticles. X-ray photoelectron spectroscopy (XPS) was applied to determine the shell thickness of the nanoparticles. The software SESSA v2.0 was used to analyze the intensities of the elastic peaks, and the QUASES software package was employed to evaluate the shape of the inelastic background in the XPS survey spectra. For the first time, nanoparticle shell thicknesses are presented, which are exclusively based on the analysis of the XPS inelastic background. Furthermore, principal component analysis (PCA)-assisted time-of-flight secondary-ion mass spectrometry (ToF-SIMS) of the PTFE–PS nanoparticle sample set revealed a systematic variation among the samples and, thus, confirmed the incomplete encapsulation of the core by the shell material. As opposed to that, no variation is observed in the PCA score plots of the PTFE–PMMA nanoparticle sample set. Consequently, the complete coverage of the core by the shell material is proved by ToF-SIMS with a certainty that cannot be achieved by XPS and T-SEM.
Neuartige Materialien, die bekannte (Werk-)Stoffe mit neuen Funktionalitäten ausstatten, spielen eine zunehmend wichtige Rolle im Bereich der Materialforschung und -prüfung. Das Spektrum neuartiger Materialien reicht von der gezielten Oberflächenfunktionalisierung und -strukturierung makroskopischer Materialien, dünnen Beschichtungen bis hin zu mikro- und nanoskaligen Kompositmaterialien und funktionalen Materialien an der Schnittstelle zur Biologie, Biotechnologie, nachhaltige Energiespeicherung und Sensorik. Dabei bieten neuartige Materialien die Chance, Werkstoffe und Produkte mit erweiterter oder verbesserter Funktionalität zu erhalten und Sicherheit bereits im Designprozess zu berücksichtigen. Durch dieses breite Anwendungsspektrum und die Herausforderungen, die solche Materialien für die Sicherheit in Chemie und Technik mit sich bringen, sind diese in allen Themenfeldern der BAM repräsentiert (Material, Analytical Sciences, Energie, Infrastruktur und Umwelt).
Die Aufgaben der BAM erstrecken sich dabei von der Herstellung von Referenzmaterialien für Industrie, Forschung und Regulation, über die Erstellung von standardisierten Referenzverfahren für nachhaltige Messungen im Umwelt- und Lebenswissenschaftsbereich bis hin zur Bereitstellung von belastbaren und zitierbaren Referenzdaten. Durch die genaue Charakterisierung neuartiger Materialien können potentiell problematische Substanzen identifiziert und deren Risiken besser abgeschätzt werden. In diesem Beitrag werden einige aktuelle Beispiele aus diesen Bereichen vorgestellt.
The cleaning of black carbon covered Italian marble and limestone sculptures is a challenging task for restorers and scientists, especially when black soot is penetrated into the porous surface of a stone.
Numerous sculptures of the Bode-Museum underwent two domestic fires at the repository in Berlin in May 1945, where soot damaged the surface of these artworks. Promising results in removing black layers were achieved by the application of modified gels to artificially weathered and sooted Carrara marble mockups. However, transferring the cleaning method to original samples requires a cautious proceeding with respect to short-term and long-term implications. To understand physico-chemical reactions, the analytics of gel-treated marble surfaces is of essential importance.
Time-of-Flight Secondary Ion Mass Spectroscopy (ToF-SIMS) and Auger electron spectroscopy (AES) were used to gain insights into surface chemistry and the distribution of chemical groups or fragments and enable a deeper understanding of the functionality of the applied gels and of the efficiency of tested cleaning processes. Depth profiling by ToF-SIMS is introduced as a tool to study the penetration behavior of applied cleaning chemicals.
The contribution presents the analytical methods, their possibilities and challenges, and summarizes initial results of this study.
The Systematic Review of ISO/DIS 15632 Selected Instrumental Parameters for the Specification and Checking of Energy-Dispersive X-Ray Spectrometers for Use in Electron Probe Microanalysers is discusssed. Zero strobe peak, better description of dead-time and of the pulse-processing electronics are the major issues under discussion.
The presentation points out and discusses potential future projects on microbeam analysis which shall benefit from the pre-standardisation platform VAMAS (Versailles Project on Advanced Materials and Standards) which is basically related to Organisation and participation in international inter-laboratory comparisons. Ideas and strategies of better synergies between VAMAS and ISO projects (including promotion and a dedicated liaison) are discusssed.