Chemie und Prozesstechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (1168) (entfernen)
Sprache
- Englisch (1168) (entfernen)
Schlagworte
- Fluorescence (61)
- Quantum yield (49)
- Nanoparticles (39)
- Mechanochemistry (36)
- Quality assurance (31)
- Mass spectrometry (30)
- SAXS (30)
- Imaging (29)
- Sensor (29)
- XPS (29)
- Dye (27)
- Nanoparticle (27)
- Lifetime (26)
- Nano (26)
- Non-destructive testing (26)
- Ultrasound (26)
- ICP-MS (25)
- Photophysics (23)
- Concrete (21)
- LIBS (21)
- Synthesis (21)
- Laser ablation (20)
- MALDI-TOF MS (18)
- Particle (18)
- Reference material (18)
- Raman spectroscopy (17)
- Lanthanide (16)
- Mechanism (16)
- Metrology (16)
- Traceability (16)
- DNA (14)
- In situ (14)
- X-ray photoelectron spectroscopy (14)
- Electron microscopy (13)
- Nanomaterial (13)
- Spectroscopy (13)
- Synchrotron (13)
- Additive manufacturing (12)
- BAMline (12)
- Cancer (12)
- Magnetic resonance imaging (12)
- Photoluminescence (12)
- Thermography (12)
- XRD (12)
- Cement (11)
- Computed tomography (11)
- Luminescence (11)
- Machine learning (11)
- Polylactide (11)
- X-ray scattering (11)
- Cell (10)
- Microplastics (10)
- Optical probe (10)
- Polymers (10)
- Upconversion nanoparticle (10)
- Corrosion (9)
- Interlaboratory comparison (9)
- LA-ICP-MS (9)
- Laser induced plasma (9)
- Mycotoxins (9)
- NDT (9)
- NIR (9)
- Simulation (9)
- Upconversion (9)
- X-ray diffraction (9)
- Air-coupled ultrasound (8)
- Archaeometry (8)
- Calibration (8)
- Crystallization (8)
- Electrochemistry (8)
- Energy transfer (8)
- Graphene (8)
- Immunoassay (8)
- Ligand (8)
- MOUSE (8)
- Mass-Spectrometry (8)
- Measurement uncertainty (8)
- Method (8)
- Microscopy (8)
- Nanomaterials (8)
- Polymer (8)
- Reliability (8)
- Reproducibility (8)
- Surface chemistry (8)
- Contrast agent (7)
- LC-MS/MS (7)
- Laser thermography (7)
- MRI (7)
- Mass Spectrometry (7)
- Microstructure (7)
- Monitoring (7)
- NEXAFS (7)
- Plasma modeling (7)
- Protein (7)
- Quantification (7)
- Radiation damage (7)
- Standardization (7)
- TED-GC/MS (7)
- Validation (7)
- X-ray computed tomography (7)
- XANES (7)
- XRF (7)
- Analytical Chemistry (6)
- Bioimaging (6)
- Bioinformatics (6)
- Catalysis (6)
- Certification (6)
- Chlorine (6)
- Copper (6)
- Cr(III) (6)
- Dosimetry (6)
- Ectoine (6)
- Ionization (6)
- Material moisture (6)
- Metaproteomics (6)
- Microplastic (6)
- NAP-XPS (6)
- Nondestructive testing (6)
- Porosity (6)
- Quantitative spectroscopy (6)
- Radiography (6)
- Reference materials (6)
- Scattering (6)
- Silica (6)
- Standards (6)
- Structural health monitoring (6)
- Surface (6)
- Uncertainty (6)
- X-ray refraction (6)
- XAS (6)
- Adsorption (5)
- Aggregation (5)
- Application (5)
- Automation (5)
- CCQM (5)
- Classification (5)
- Cocrystal (5)
- Comparability (5)
- Core-shell (5)
- DNA origami (5)
- DRIFTS (5)
- Food (5)
- Gadolinium (5)
- Geant4 (5)
- Geant4-DNA (5)
- General Materials Science (5)
- HRMS (5)
- Industry 4.0 (5)
- Inks (5)
- Iron oxide (5)
- Low energy electrons (5)
- Metabolomics (5)
- Microdosimetry (5)
- Multiplexing (5)
- PFAS (5)
- PH (5)
- Particle size distribution (5)
- Plasma diagnostics (5)
- Quantum dots (5)
- Raman microspectroscopy (5)
- SEM (5)
- SWIR (5)
- Size (5)
- Spectroscopic ellipsometry (5)
- Super resolution (5)
- ToF-SIMS (5)
- Tomography (5)
- Transformation products (5)
- Water (5)
- X-ray absorption spectroscopy (5)
- pH (5)
- Absolute isotope ratio (4)
- Acoustic levitation (4)
- Antibody (4)
- Bacteria (4)
- Bioconjugation (4)
- Cells (4)
- Coating (4)
- Coda wave interferometry (4)
- Complex (4)
- Core-shell particles (4)
- Cyclization (4)
- DNA radiation damage (4)
- Data processing (4)
- Discotic Liquid Crystals (4)
- ELISA (4)
- Ectoin (4)
- Embedded sensors (4)
- Environment (4)
- Epoxy (4)
- Flow cytometry (4)
- Fluidics (4)
- Food analysis (4)
- G5P (4)
- GFRP (4)
- Human serum (4)
- Hydration (4)
- Image processing (4)
- Immunohistochemistry (4)
- Instrumentation (4)
- Internal defects (4)
- Isotope dilution (4)
- LEE (4)
- Lamb waves (4)
- Laser-induced breakdown spectroscopy (4)
- Life sciences (4)
- MALDI (4)
- MOF (4)
- Non-invasive analysis (4)
- Optical spectroscopy (4)
- Phosphorus (4)
- Porous materials (4)
- Quality control (4)
- Quantum dot (4)
- Raman (4)
- Reverse glass painting (4)
- SSB (4)
- Sample preparation (4)
- Self-assembly (4)
- Semiconductor (4)
- Sewage sludge (4)
- Signal enhancement (4)
- Signal processing (4)
- Small-angle scattering (4)
- Software (4)
- Soil (4)
- Stability (4)
- Structural Health Monitoring (4)
- Sulfur (4)
- Surface coating (4)
- Synchrotron radiation (4)
- Temperature (4)
- Theory (4)
- Thin films (4)
- TiO2 (4)
- Tumor metabolism (4)
- Wood (4)
- X-ray spectroscopy (4)
- XANES spectroscopy (4)
- ssDNA (4)
- Abwasser (3)
- Active thermography (3)
- Affinity chromatography (3)
- Anhydrite (3)
- Array (3)
- Artificial neural networks (3)
- Atomic force microscopy (3)
- Base damage (3)
- Base loss (3)
- Bead (3)
- Bio-SAXS (3)
- Biomarker (3)
- Brain (3)
- Bridge (3)
- Brightness (3)
- Broadband dielectric spectroscopy (3)
- CONSENS (3)
- COVID-19 (3)
- CRM (3)
- Catalyst (3)
- Certified reference material (3)
- Chemisorption (3)
- Civil engineering (3)
- Conjugate (3)
- Core-shell nanoparticles (3)
- Cosolute (3)
- Cracks (3)
- DFT (3)
- DNA damage (3)
- Damage (3)
- Data (3)
- Defect reconstruction (3)
- Diffusion (3)
- Digestion (3)
- EBSD (3)
- EPMA (3)
- Electrical conductivity (3)
- Electrocatalysis (3)
- Electron probe microanalysis (3)
- Electron probe microanalysis (EPMA) (3)
- Emission spectroscopy (3)
- Ergot alkaloids (3)
- Excitation power density (3)
- Extracellular matrix (3)
- FTIR (3)
- Fatty acid metabolism (3)
- Flourescence (3)
- Functionalized graphene (3)
- GDMS (3)
- GVP (3)
- Gadofosveset (3)
- Gas chromatography (3)
- Gold (3)
- HPLC (3)
- HR-CS-MAS (3)
- High repetition rate (3)
- High-fired gypsum mortar (3)
- Hydrogen reduction (3)
- In situ studies (3)
- In-situ (3)
- Ionic liquid (3)
- Ionizing radiation damage (3)
- Isotope ratio (3)
- Isotope ratios (3)
- Kinetics (3)
- Laser (3)
- Laser-induced plasma (3)
- Limit of detection (3)
- Lipidomic profile (3)
- Liquid chromatography (3)
- MC-ICP-MS (3)
- Mass Spectroscopy (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Metabolic stress (3)
- Metals and Alloys (3)
- Method development (3)
- Modelling (3)
- Modular Production (3)
- Moisture transport (3)
- Molecular imaging (3)
- Molecularly imprinted polymers (3)
- Molecule (3)
- Monte-Carlo simulations (3)
- Mycotoxin (3)
- NMR (3)
- NMR relaxometry (3)
- Nanocomposites (3)
- Nanoparticle characterization (3)
- Nanosensor (3)
- Neural network (3)
- Neutron diffraction (3)
- Neutron imaging (3)
- Neutron scattering (3)
- Nuclear magnetic resonance (3)
- OH radical (3)
- OH radical scavenger (3)
- Optical emission spectroscopy (3)
- Oxygen evolution reaction (3)
- Peptide (3)
- Peptide library (3)
- Photodegradation (3)
- Plasma (3)
- Plasma chemistry (3)
- Plasma enhanced chemical vapor deposition (3)
- Polymer particles (3)
- Polymorphism (3)
- Portland cement (3)
- Probability of detection (3)
- Process Analytical Technology (3)
- Production (3)
- Protein unfolding (3)
- Purity assessment (3)
- Quality Infrastructure (3)
- Quenching (3)
- ROS (3)
- Radar (3)
- Radical scavenger (3)
- Reference data (3)
- Residual stress (3)
- Ring-opening polymerization (3)
- Roughness (3)
- SERS (3)
- Safety (3)
- Scaled boundary finite element method (3)
- Sensing (3)
- Shape (3)
- Shell (3)
- Silver nanoparticles (3)
- Single molecule (3)
- Single particle (3)
- Single-stranded DNA-binding proteins (3)
- Small-angle X-ray scattering (3)
- Solid state NMR (3)
- Spectral induced polarization (3)
- Surface functionalization (3)
- TEM (3)
- TOPAS (3)
- TOPAS-nbio (3)
- Thickness (3)
- Titanium dioxide (3)
- Titanium oxide (3)
- Transformation product (3)
- Transmission function (3)
- Ultrasonic imaging (3)
- Ultrasonic testing (3)
- VAMAS (3)
- X-ray (3)
- X-ray Photoelectron Spectroscopy (3)
- X-ray absorption near-edge structure (XANES) spectroscopy (3)
- X-ray imaging (3)
- 2D Materials (2)
- 3D printing (2)
- AAS (2)
- ABC (2)
- AFM (2)
- AIS (2)
- API (2)
- ATR-FTIR spectroscopy (2)
- Absolute fluorescence (2)
- Absorption (2)
- Acoustic (2)
- Acoustic-flow interaction (2)
- Active thermal imaging (2)
- Adhesive bonding (2)
- Aeroacoustics (2)
- Air-coupled (2)
- Algorithms (2)
- Aluminium (2)
- Aluminum (2)
- Amino acid analysis (2)
- Amorphous carbon (2)
- Amorphous materials (2)
- Amperometry (2)
- Amplification (2)
- Analysis (2)
- Analytical methods (2)
- Analytical model (2)
- Aromatic amino acid analysis (2)
- Artificial Intelligence (2)
- Atherosclerosis (2)
- Atomic Force Microscopy (2)
- AuNP (2)
- Automated image analysis (2)
- Automatic segmentation (2)
- BODIPY (2)
- Barcoding (2)
- Benchmarking (2)
- Benz[a]anthracene (BaA) (2)
- Benzo[a]pyrene (BaP) (2)
- Beta decay (2)
- BioSAXS (2)
- Bioanalysis (2)
- Biochemistry (2)
- Biochip (2)
- Biofilm (2)
- Biology (2)
- Biosensing (2)
- Biosensor (2)
- Biosensors (2)
- Bismuth (2)
- Bisphenol A (2)
- Boltzmann plot (2)
- Borehole (2)
- Boson peak (2)
- Brachytherapy (2)
- Building materials (2)
- C-C coupling (2)
- CFRP (2)
- CT (2)
- CXC (2)
- Cancer cells (2)
- Cancer treatment (2)
- Carbon dioxide (2)
- Catalysts (2)
- Cement-based materials (2)
- Ceria (2)
- Chemical vapor deposition (2)
- Chromatography (2)
- Climate (2)
- Cluster (2)
- Clustered nanoparticles (2)
- Cocoa (2)
- Coda Wave Interferometry (CWI) (2)
- Combustion ion chromatography (CIC) (2)
- Composite (2)
- Compressed sensing (2)
- Computed Tomography (2)
- Condensed Matter Physics (2)
- Conformity assessment (2)
- Convolutional neural networks (2)
- Corresponding relative humidity (2)
- Cr(III) complex (2)
- Crack detection (2)
- Creep-resistant steel (2)
- Crystal (2)
- Crystalinity (2)
- Cuprorivaite (2)
- DIRECTT (2)
- DMSO (2)
- Damage detection (2)
- Data Fusion (2)
- Data analysis (2)
- Deep learning (2)
- Defect detection (2)
- Defects (2)
- Degradation (2)
- Delta scale (2)
- Delta value (2)
- Derivatization (2)
- Deuterium (2)
- Diagnosis (2)
- Diagnostics (2)
- Diatoms (2)
- Dice score (2)
- Diclofenac (2)
- Diffusive gradients in thin films (DGT) (2)
- Digitalization (2)
- Direct damage (2)
- Dissociative electron attachment (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Documentation (2)
- Double-strand break (DSB) (2)
- E. coli (2)
- EDS (2)
- ESEM (2)
- Eddy current testing (2)
- Editorial (2)
- Education (2)
- Egyptian blue (2)
- Electrolysis (2)
- Electron backscattered diffraction (2)
- Electrospray (2)
- Elemental composition (2)
- Encoding (2)
- Energy deposit (2)
- Enriched finite element method (2)
- Environmental speciation (2)
- Escherichia coli (2)
- Ettringite (2)
- Extractable organically bound fluorine (EOF) (2)
- Extraction (2)
- FEM (2)
- FRET (2)
- FTIR spectroscopy (2)
- Fe-Ni (2)
- Ferrihydrite (2)
- Ferroelectret (2)
- Fertilizer (2)
- Fiber orientation (2)
- Finite-element analysis (2)
- Fire (2)
- Flash DSC (2)
- Flash thermography (2)
- Fluorescein (2)
- Fluorescence lifetime (2)
- Fluorine (2)
- Fullerene (2)
- GD-OES (2)
- Gas chromatography (GC) (2)
- Gas separation membranes (2)
- General Chemistry (2)
- General Earth and Planetary Sciences (2)
- Geology (2)
- Glucose (2)
- Gold Nanoparticles (2)
- Graphite furnace (2)
- Ground penetrating radar (2)
- Guided Waves (2)
- Guided waves (2)
- HAXPES (2)
- HPLC-MS/MS (2)
- Heart failure (2)
- Heat diffusion (2)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (2)
- High temperature (2)
- High-resolution mass spectrometry (2)
- Human factors (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration shell (2)
- Hydrazinolysis (2)
- Hydrogen (2)
- Hydrolysis (2)
- Hydroxyectoine (2)
- Hydroxyl radical (2)
- ICP-OES (2)
- ILC (2)
- ISO/IEC 27001 (2)
- Identification (2)
- IgG (2)
- Image analysis (2)
- Image quality (2)
- Image reconstruction (2)
- Image segmentation (2)
- Imaging XPS (2)
- Immunoaffinity extraction (2)
- Immunocapture (2)
- Immunoglobulins (2)
- Immunosensor (2)
- In situ measurement (2)
- In situ real-time monitoring (2)
- In vivo imaging (2)
- Indirect damage (2)
- Indoor air (2)
- Industrial and Manufacturing Engineering (2)
- Information security (2)
- Infrared thermography (2)
- Ink (2)
- Inspection (2)
- Integrating sphere spectroscopy (2)
- Ion mobility (2)
- Ion mobility spectrometry (2)
- Iridium oxide (2)
- Iron (2)
- Isotope (2)
- Isotope dilution (ID) (2)
- Isotope dilution mass spectrometry (2)
- Isotope reference material (2)
- Isotopic fractionation (2)
- Iterative reconstruction (2)
- Joint sparsity (2)
- Lab-on-a-chip (2)
- Label (2)
- Laminography (2)
- Lapis lazuli (2)
- Laser Ablation (2)
- Laser Doppler vibrometer (2)
- Laser Thermography (2)
- Laser ablation in liquid (2)
- Laser induced dielectric breakdown (2)
- Laser induced plasma deposition (2)
- Laser powder bed fusion (2)
- Lateral resolution (2)
- Lattice parameters (2)
- Li-ion battery (2)
- Life science (2)
- Ligands (2)
- Lipidomics (2)
- Lipids (2)
- Liquid chromatography (LC) (2)
- Lithium (2)
- Livermore model (2)
- Low-energy electrons (2)
- MALDI TOF MS (2)
- MCS (2)
- MYCN (2)
- Machine Learning (2)
- Magnetic beads (2)
- Magnetic stray field (2)
- Management system standard (2)
- Manuscripts (2)
- Mass spectrometry (MS) (2)
- Material science (2)
- Materials (2)
- Materials Chemistry (2)
- McSAS3 (2)
- Mechanical properties (2)
- Mechanochemical synthesis (2)
- Medicine (2)
- Mercury (2)
- Mesoporous silica (2)
- Metabolism (2)
- Metal fluorides (2)
- Metal nanoparticles (2)
- Metal-organic-frameworks (2)
- Metals (2)
- Metal−organic frameworks (2)
- Methodology (2)
- Metrology in chemistry (2)
- Micro-XRF (2)
- Micro-computed tomography (2)
- Microbial proteomics (2)
- Microbiome (2)
- Microemulsion (2)
- Microfluidics (2)
- Microwave synthesis (2)
- Mobile phase (2)
- Modeling chemical reactions (2)
- Moisture (2)
- Moisture measurements (2)
- Molar mass (2)
- Molecular mobility (2)
- Molecular sieves (2)
- Monoclonal antibody (2)
- Monte-Carlo simulation (2)
- Mueller-Matrix imaging ellipsometry (2)
- Multi-phase materials (2)
- Multimodal (2)
- Mussel-inspired adhesives (2)
- NIR-II (2)
- NMR spectroscopy (2)
- NP (2)
- Nanocomposite (2)
- Nanoparticle formation (2)
- Nanopartikel (2)
- Nanosheets (2)
- Nanotechnology (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Nickel (2)
- Nitrotyrosine (2)
- Non-destructiv testing (2)
- Nondestructive testing techniques (2)
- Nontarget analysis (2)
- Numerical simulation (2)
- OH Radical (2)
- Oligonucleotides (2)
- Online NMR spectroscopy (2)
- Ontology (2)
- Open Science (2)
- Optical assay (2)
- Optical detection (2)
- Optical properties (2)
- Optical sensor (2)
- Optimization (2)
- Organic compounds (2)
- Origami (2)
- Oxidation (2)
- Oxygen (2)
- Oxygen evolution reaction (OER) (2)
- Oxygen sensor (2)
- PDT (2)
- PGAA (2)
- PIXE (2)
- PXRD (2)
- Papyrus (2)
- Partially saturated pores (2)
- Particle morphology (2)
- Particle scattering (2)
- Particle scattering simulations (2)
- Particle size (2)
- Penelope model (2)
- Peptide analysis (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Permethrin (2)
- Pesticide (2)
- Phase transformation (2)
- Phenylalanine (2)
- Phosphorus fertilizer (2)
- Photochemistry (2)
- Photooxidation (2)
- Physics (2)
- Physisorption (2)
- Pigment analyses (2)
- Pigment identification (2)
- Plasma tomography (2)
- Pollen (2)
- Polycyclic aromatic hydrocarbon (PAH) (2)
- Polyethylene glycol (2)
- Polyglycerol (2)
- Polymer of intrinsic microporosity (2)
- Polymer particle (2)
- Pore space (2)
- Powder X-ray diffraction (2)
- Prehydrated electron (2)
- Probe (2)
- Process analytical technology (2)
- Process control (2)
- Process monitoring (2)
- Proficiency testing (2)
- Prostate cancer (2)
- Protein A (2)
- Proteomics (2)
- Provenance studies (2)
- Pulsed thermography (2)
- Purity (2)
- Pyrolysis (2)
- Quality Control (2)
- Quantitative protein analysis (2)
- Quasi-direct damage (2)
- Quasielastic neutron scattering (2)
- R package (2)
- Radiation therapy (2)
- Radiationtherapy (2)
- Radical (2)
- Radical Scavenger (2)
- Radioactive decay (2)
- Radiolysis (2)
- Ratiometric (2)
- Reactive oxygen species (2)
- Real-time process monitoring (2)
- Reconstruction algorithm (2)
- Reference (2)
- Regeneration (2)
- Regularization (2)
- Reinforced Concrete (2)
- Reinforced concrete (2)
- Reporter (2)
- Rheology (2)
- Rhodamine (2)
- Round robin test (2)
- SBA-15 (2)
- SI (2)
- SI traceability (2)
- Scanning electron microscopy (2)
- Screening (2)
- Secondary ion mass spectrometry (2)
- Semiconductor nanocrystal (2)
- Semiconductor quantum dot (2)
- Semitransparent (2)
- Sensors (2)
- Sequence coverage (2)
- Shadowgraphy (2)
- Si-Ge (2)
- Sialic acid (2)
- Silanization (2)
- Silicon (2)
- Simvastatin (2)
- Single particle ICP-MS (2)
- Single-strand break (SSB) (2)
- Small angle scattering (2)
- Small-angle xray scattering (2)
- Small-spot XPS (2)
- Solid state (2)
- Solubility (2)
- Specific heat spectroscopy (2)
- Spectroskopic Imaging (2)
- Sr isotopes (2)
- Stainless steel (2)
- Standardisation (2)
- Sulfidation (2)
- Supramolecular chemistry (2)
- Surface analysis (2)
- Surface chemical analysis (2)
- Surface group quantification (2)
- Surface plasmon resonance (2)
- Surface science (2)
- Surface water (2)
- Sustainability (2)
- Synthetic Training Data (2)
- Synthetic peptides (2)
- Sythesis (2)
- TGA-FTIR (2)
- Tag (2)
- Tandem MS (2)
- Testing laboratories (2)
- Therapy (2)
- Thermal anhydrite (2)
- Thermal desorption (2)
- Thermal wave (2)
- Thin polymer films (2)
- Time-resolved (2)
- Tin acetates (2)
- Tire wear (2)
- Tissue (2)
- Topas-MC (2)
- Topas-nBio (2)
- Triple isotope fractionation (2)
- Tumor (2)
- Tyrosine (2)
- UV irradiation (2)
- Ultrasonic guided waves (2)
- Uncertainties (2)
- VCSEL (2)
- VOC (2)
- VRFB (2)
- Vacuum-UV (2)
- Virus inhibition (2)
- Viscosity (2)
- Visualization (2)
- Volatile organic compounds (2)
- Wastewater (2)
- Wave propagation (2)
- Welding (2)
- X-ray Photoelectron Spectroscopy (XPS) (2)
- X-ray fluorescence spectroscopy (2)
- XCT (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- ZIF (2)
- ZIF-8 (2)
- Zinc oxide (2)
- Zirconium (2)
- µ-CT (2)
- (Quantitative) Structure-Active Relationships (1)
- (ter-)pyridineterminated self-assembled monolayer (1)
- 1-dimensional, (1)
- 1-indanol (1)
- 1-propyl-3-methyl-imidazolium bis(trifluoromethylsulfonyl)imide (1)
- 13th century (1)
- 150th anniversary (1)
- 150th anniversary of BAM (1)
- 2,5-dihydroxyacetophenone (1)
- 2-oxazoline (1)
- 2-propanol oxidation (1)
- 20L-sphere (1)
- 2101 duplex stainless steel (1)
- 266nm (1)
- 280 nm (1)
- 29Si (1)
- 2D (1)
- 2D chromatography (1)
- 2D model (1)
- 2D nanomaterial (1)
- 3D (1)
- 3D deep convolutional neural network (3D DCNN) (1)
- 3D imaging (1)
- 3D microstructure (1)
- 3D particle analysis (1)
- 3D printed hydrogel (1)
- 3D ultrastructural analysis (1)
- 3D visualization (1)
- 3D-printing (1)
- 4,4′-dimercaptoazobenzene (1)
- 4H–SiC (1)
- 5-Bromouracil (1)
- 5-bromouracil (1)
- 6xHis (1)
- 8-bromoadenine (1)
- 89Y MAS-NMR (1)
- A4F (1)
- AAA (1)
- AAAA (1)
- ABID (1)
- ACEnet (1)
- ADA-GEL (1)
- ADMM (1)
- AEMFC (1)
- AET (1)
- AF4 (1)
- AG nanoparticle (1)
- AGE (1)
- ALCOREF (1)
- ANFO (1)
- ANOVA (1)
- ASIC (1)
- ASR-Sensitive Aggregate (1)
- ATCUN (1)
- AU nanoparticle (1)
- Aantimicrobial (1)
- Ab initio calculation (1)
- Abasic site (1)
- Absolute measurement (1)
- Absolute quantum yield (1)
- Absorptance (1)
- Absorption coefficient (1)
- Absorption spectrometry (1)
- Academic Software (1)
- Academic genealogy (1)
- Accreditation (1)
- Accuracy (1)
- Acid rock drainage (1)
- Acidic oxygen evolution reaction (1)
- Acoustic Damping (1)
- Acoustic sensors (1)
- Acoustical damping (1)
- Acoustics (1)
- Acousto-optic effect (1)
- Acrylamide (1)
- Acute myocardial infarction (1)
- Additive Manufacturing (1)
- Adhesion (1)
- Adhesives (1)
- Adoption (1)
- Adsorbable organically bound fluorine (AOF) (1)
- Adsorbed microgel particles (1)
- Adsorbed water layer thickness (1)
- Advanced Materials (1)
- Advanced calorimetry (1)
- Advanced materials (1)
- Advanced nanomaterials (1)
- Affinity (1)
- Affinity Chromatography (1)
- Affinity Extraction (1)
- Affinity Separation (1)
- Affinity extraction (1)
- Aflatoxins (1)
- Afterglow (1)
- AgInS (1)
- Agarose gel electrophorese (1)
- Ageing (1)
- Aggregates (1)
- Aggregation induced emission (1)
- Agile (1)
- Agility (1)
- Aging (1)
- Air analysis (1)
- Air coupled (1)
- Air filter samples (1)
- Air fragmentation (1)
- Air particulate matter (1)
- Air-coupled transducers (1)
- Airfoil pitching (1)
- Airfoil surging (1)
- Airport (1)
- Akaike information criterion picker (1)
- Akkreditierung (1)
- Aktivkohle (1)
- Al-Composite (1)
- Al13 (1)
- AlCl (1)
- AlPO4-5 (1)
- Alanine scan (1)
- Albumin (1)
- Alcohol electrooxidation (1)
- Alexander von Humboldt (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated slag (1)
- Alkali-silica reaction (1)
- Alkaline earth metal coordination polymers (1)
- Alkoxysilanes (1)
- Allergy (1)
- Altenuene (1)
- Alternaria mycotoxins (1)
- Aluminium alloys (1)
- Aluminum alloys (1)
- Aluminum oxide (1)
- Alzheimer’s disease (1)
- Ambient pressure laser ionization (1)
- Amino Acids (1)
- Ammonium (1)
- Ammonium nitrate (1)
- Amorphization (1)
- Amorphous phases (1)
- Amphiphilicity (1)
- Amyloid (1)
- Amyloid-beta (1)
- Analysis area measurements (1)
- Analytical chemistry (1)
- Analytical sciences (1)
- Analyzer-Based Imaging (1)
- Anemia (1)
- Aneurysm (1)
- Angiography (1)
- Angiotensin II (1)
- Angle wedge (1)
- Anilinopyridine (1)
- Anion exchange (1)
- Anion receptors (1)
- Anisotropic fiber orientation (1)
- Anomalous Small Angle X-ray Scattering (1)
- Anosteocytic bone (1)
- Antagonists (1)
- Anthracene (1)
- Anthracene schiff base (1)
- Anthropocene (1)
- Antibacterial properties (1)
- Antibacterial surface coatings (1)
- Antibiotic delivery (1)
- Antibiotic release (1)
- Antibiotics (1)
- Antibody Purification (1)
- Antibody coating (1)
- Antibody conjuagtes (1)
- Antibody conjugates (1)
- Antibody identification (1)
- Antibody quantification (1)
- Antibody-gated indicator delivery (1)
- Antifouling biocides (1)
- Antifouling surface coatings (1)
- Antifriction coefficient (1)
- Antikensammlung Berlin (1)
- Antikörper (1)
- Antimicrobial titanium coating (1)
- Antimony oxychloride ( Sb4O5Cl2) (1)
- Antiviral activity (1)
- App (1)
- Aqueous synthesis (1)
- Argon (1)
- Argon gas cluster ion sputtering (1)
- Aromatic aldehydes (1)
- Arsenic retention (1)
- Arsenite (1)
- Art restauration (1)
- Artificial Neural Networks (1)
- Artificial digestion (1)
- Artificial intelligence (1)
- Artificial neural network modelling (1)
- Artificial weathering (1)
- Aspergillus (1)
- Assessment (1)
- Asymmetrical flow field flow fractionation (AF4) (1)
- Atherosclerotic plaques (1)
- Atmospheric Pressure Chemical Ionization (1)
- Atmospheric aerosol (1)
- Atmospheric pressure plasma (1)
- Atomic (1)
- Atomic Absorption (1)
- Atomic Absorption Spectrometry (1)
- Atomic absorption spectrometry (1)
- Atomic and Molecular Physics and Optics (1)
- Atomic and molecular mapping (1)
- Atomic and molecular physics, and optics (1)
- Atomic layer deposition (1)
- Atomic weight (1)
- Atomspheric-Pressure (1)
- Au (1)
- Auger Electron Spectroscopy (1)
- Auger-electron spectroscopy (AES) (1)
- Augmented data (1)
- Austenitic stainless steel (1)
- Automated Purification (1)
- Automated synthesis (1)
- Automated system (1)
- Automatic Segmentation (1)
- Automatisation (1)
- Automatisierung (1)
- Automotive engineering (1)
- Automotive industry (1)
- Autophagy (1)
- Aviation (1)
- Avogadro constant (1)
- Ayesian models (1)
- Azobenzene (1)
- BAM (1)
- BAM SynthCOND (1)
- BAM SynthMAT (1)
- BAM-P109 (1)
- BCA test (1)
- BERM (1)
- BET (1)
- BET specific surface area (1)
- BF3 (1)
- BLE Bluetooth low energy (1)
- BPA removal (1)
- BSA (1)
- BaF (1)
- Back-side integration (1)
- Backlighting (1)
- Bacterial lysates (1)
- Bacteriophage f1 (1)
- Bakterien (1)
- Ball milling (1)
- Baltic Stone Age (1)
- Banana (1)
- Bandgap quenching (1)
- Barium (1)
- Basaluminite (1)
- Basic solvent (1)
- Bassanite (1)
- Batteries (1)
- Battery (1)
- Bawit (1)
- Bayesian hierachical modelling (1)
- Bbeverages (1)
- Bead injection spectroscopy (1)
- Bead-based assay (1)
- Beam hardening (1)
- Benchmarking study (1)
- Benchtop NMR Spectroscopy (1)
- Benzene-1,3,5-tricarboxylic acid (1)
- Benzothiadiazole (1)
- Beschichtung (1)
- Beta elimination (1)
- Beta particle (1)
- Beta-eucryptite (1)
- Bimetallic noble metal nanoparticles (1)
- Bimodal distribution (1)
- Bimodal size distribution (1)
- Binary measurement (1)
- Binder (1)
- Binding molecule (1)
- Bio sensing device (1)
- Bio-based concrete (1)
- Bio-orthogonal chemistry (1)
- Bioactive glass (1)
- Bioapatite (1)
- Bioconjugate (1)
- Biodiesel fuel (1)
- Biodosimetry (1)
- Biofilms (1)
- Biofunctional Molecules (1)
- Biogenic carbonates (1)
- Biointerfaces (1)
- Biological & biomedical applications (1)
- Biological boron recycling (1)
- Biologisches Dosimeter (1)
- Biomedical application (1)
- Biopolymers Probes (1)
- Biopolyol (1)
- Bioresorbable Biomaterials (1)
- Bioseparation (1)
- Biosilicification (1)
- Biosynthesis (1)
- Biotechnology (1)
- Biotests (1)
- Biotransformation (1)
- Bismuth titanates (1)
- Bisphenol-A (1)
- Bistable fluidic amplifier (1)
- Black phosphorus (1)
- Black writing ink (1)
- Blended learning (1)
- Blends (1)
- Blind structured illumination (1)
- Block copolymer (1)
- Block regularization (1)
- Block-sparsity (1)
- Blood-brain barrier (1)
- Boden (1)
- Boehmite nanoparticles (1)
- Bombs (1)
- Bone (1)
- Bone matrix (1)
- Bone porosity (1)
- Bone tissue engineering (1)
- BornAgain simulation (1)
- Boron halides (1)
- Boron isotope (1)
- Boron isotope fractionation (1)
- Boron isotopic composition (1)
- Boronic acid (1)
- Boronic acid-functionalized 2D MoS2 (1)
- Borosilicate Glass (1)
- Borosilicate glass (1)
- Bound water (1)
- Bovine serum albumin (1)
- Bovine serum albumin (BSA) (1)
- Bradford (1)
- Bragg peak (1)
- Brain PET tracers (1)
- Brassica napus (1)
- Bravais lattice (1)
- Breath (1)
- Bridge inspection (1)
- Broadband Dielectric Spectrscopy (1)
- Broadband dielectric microscopy (1)
- Bronsted acidity (1)
- Brown-rot fungi (1)
- Brunauer-Emmett-Teller (1)
- Buffer (1)
- Building material (1)
- Bundesanstalt für Materialforschung und -prüfung (1)
- Byproducts (1)
- Bystander effect (1)
- C-dot (1)
- CCQM (Consultative Committee for Amount of Substance) (1)
- CCQM key comparison (1)
- CE/MC-ICP-MS (1)
- CID (1)
- CIGS (1)
- COPV (1)
- COSMO (1)
- CPD (1)
- CRP (1)
- CT simulation (1)
- CaCl emission bands (1)
- Cadmium (1)
- Cadmium and lead remediation (1)
- Calcification (1)
- Calcium (1)
- Calcium carbide method (1)
- Calcium carbonates (1)
- Calcium monofluoride (1)
- Calcium sulfate (1)
- Calibrated fluorescence measurements (1)
- Calibration free LIBS (1)
- Calibration-free analysis (1)
- Cancer therapy (1)
- Cancer awareness measure (1)
- Cancer risk (1)
- Cancer therapy (1)
- Canine olfactometry (1)
- Canny approach (1)
- Capillary (1)
- Capillary electrophoresis (1)
- Capillary electrophoresis (CE) (1)
- Capillary electrophoresis-mass spectrometry (1)
- Carbodiimide crosslinking (1)
- Carbon Nanotubes (1)
- Carbon dot (1)
- Carbon fiber-reinforced polymer (1)
- Carbon fibre-reinforced plastic (1)
- Carbon footprint (1)
- Carbon ions (1)
- Carbon nanodots (1)
- Carbon nanoparticles (1)
- Carbon nanotubes (1)
- Carbon steel (1)
- Carboxyl group (1)
- Cardiac troponin (1)
- Cardiolipins (1)
- Cardiovascular (1)
- Carrier (1)
- Carrier gas hot extraction (1)
- Carriers (1)
- Catalyst layer (1)
- Catch and release assay (1)
- Catechol (1)
- Categorisation scheme (1)
- Cathode material (1)
- Cationic ring opening polymerization (1)
- Cconventional method (1)
- CdS (1)
- CdS shell (1)
- CdSe (1)
- CdSe/ZnS quantum Dots (1)
- CdTe sensor (1)
- Cell sheet fabrication (1)
- Cell studies (1)
- Cellular trafficking (1)
- Cellular uptake (1)
- Cement clinker remnants (1)
- Cement hydration (1)
- Central Taurus (1)
- Ceramic matrix composite (1)
- Ceramics and Composites (1)
- Chalcogenides (1)
- Characterisation of soil sites (1)
- Characterization (1)
- Charakterisierung (1)
- Charge Transfer (1)
- Charge transfer (1)
- Chelate (1)
- Chemical Biology (1)
- Chemical Process Control (1)
- Chemical Safety (1)
- Chemical admixtures (1)
- Chemical derivatization (1)
- Chemical extraction (1)
- Chemical protein modification (1)
- Chemical sensors (1)
- Chemical transformation (1)
- Chemical-hydrodynamic modeling (1)
- Chemiluminescence (1)
- Chemodosimeter (1)
- Chemometrics (1)
- Chemotherapy (1)
- Chenopodium album (1)
- Chicken antibodies (1)
- Chloride (1)
- Chlorides (1)
- Chlorine determination (1)
- Chlorofluorosilanes (1)
- Chronic kidney disease (1)
- Ciaaw.org (1)
- Ciprofloxacin (1)
- Citation (1)
- Citizen Science (1)
- Civil Engineering (1)
- Classical primary measurement method (CPM) (1)
- Cleaning (1)
- Cleavable linker (1)
- Cleavable reporter (1)
- Cleavage (1)
- Click chemistry (1)
- Clinical Biochemistry (1)
- Clinoptilolite (1)
- Co-crystal (1)
- Coaggregation (1)
- Coating materials (1)
- Cobalt and zinc oxides (1)
- Cobalt deposition (1)
- Cocrystals (1)
- Coda (1)
- Coda Wave Interferometry (1)
- Coded Aperture (1)
- Coded aperture (1)
- Coded apertures (1)
- Cold to fast neutron testing (1)
- Collaborative studies (1)
- Collaborative trial (1)
- Collagen (1)
- Collection (1)
- Collision induced dissociation (CID) (1)
- Collision-induced dissociation (1)
- Color (1)
- Color sensing (1)
- Colorants (1)
- Colorimetric Test (1)
- Colourants (1)
- Column holder (1)
- Columnar Liquid Crystal (1)
- Combinatorial chemistry (1)
- Combined techniques (1)
- Combustion (1)
- Combustion Ion Chromatography (1)
- Combustion ion chromatography (1)
- Commercial metal-organic frameworks (1)
- Comparison (1)
- Compatible solute (1)
- Complementary MS (1)
- Complementary methodology and metrology (1)
- Complex systems (1)
- Complexation (1)
- Component-like test (1)
- Composite Overwrapped Pressure Vessels (1)
- Composite Pipes (1)
- Composite overwrapped pressure vessels (1)
- Composite panel (1)
- Composite structures (1)
- Composites (1)
- Composition (1)
- Compositional complex alloys (1)
- Compost (1)
- Compound-independent calibration (1)
- Compressibility (1)
- Compression mechanical (1)
- Compression strength (1)
- Computational chemistry (1)
- Computational fluid dynamics (1)
- Computed radiography (CR) (1)
- Comressed Sensing (1)
- Comsumer good samples (1)
- Concentration mapping (1)
- Concentration step (1)
- Concrete and screed (1)
- Concrete bridges (1)
- Concrete structures (1)
- Concrete testing (1)
- Conductor-like screening model (1)
- Conference (1)
- Confined water (1)
- Confocal laser scanning microscopy (1)
- Confocal microscopy (1)
- Confocal raman imaging (1)
- Conformity assessment body (1)
- Coniophora puteana (1)
- Construction (1)
- Construction product (1)
- Consumer Products (1)
- Contaminated site (1)
- Continuous Sensor (1)
- Continuous processes (1)
- Controlled morphology (1)
- Controlled-shape (1)
- Conventional isotope ratio (1)
- Conversion (1)
- Converter material (1)
- Convolutional Neural Network (DCNN) (1)
- Convolutional neural network (1)
- Convolutional neural networks (CNN) (1)
- Coordination chemistry (1)
- Coordination polymers (1)
- Copolymerization (1)
- Copper nanoparticles (1)
- Copper sulfides (1)
- Copper vacancies (1)
- Coptic manuscripts (1)
- Core shell structure (1)
- Core-shell structures (1)
- Core–shell particles (1)
- Corner echo (1)
- Corona (1)
- Corona Discharge (1)
- Corona virus (1)
- Corophium volutator (1)
- Correlation (1)
- Corrosion rate (1)
- Coulometric sensors (1)
- Coumarin (1)
- Counterions (1)
- Coupling reactions (1)
- Covalend functionalization (1)
- Covalent Organic Frameworks (1)
- Covalent functionalization (1)
- Covalent interactions (1)
- Covid-19 (1)
- Cr-complex (1)
- Crack Detection (1)
- Crack depth (1)
- Crack evolution (1)
- Creep (1)
- Cristobalite frameworks (1)
- Cross laminography (1)
- Cross section (1)
- Crosslinking density (1)
- Cryo XPS (1)
- Cryo-soft X-ray tomography (1)
- Cryoadsorption (1)
- Cryogenic Vessels (1)
- Crystal engineering (1)
- Crystal structure (1)
- Crystallography (1)
- Crystals (1)
- CuO nanoparticles (1)
- Cultural heritage (1)
- Curcubituril (1)
- Cy3 (1)
- Cyanide (1)
- Cyanide in soil (1)
- Cyanine (1)
- Cyber-Physical Systems (1)
- Cyber-physical system (1)
- Cyber-physical systems (1)
- Cyclic (1)
- Cyclic voltammetry (1)
- Cycloaddition (1)
- Cyclohexane (1)
- Cycloparaphenylenes (1)
- Cytoplasm (1)
- Cytoplasmic remodeling (1)
- Cytotoxicity (1)
- D-glucose (1)
- D2XRF (1)
- DAS (1)
- DC-Arc (1)
- DEA (1)
- DFG SPP 2005 (1)
- DFT calculation (1)
- DFT calculations of Raman spectra (1)
- DHAP (1)
- DLP (1)
- DMD (1)
- DNA Dosimeter (1)
- DNA Origami (1)
- DNA base damage (1)
- DNA based data storage (1)
- DNA data storage (1)
- DNA degradation (1)
- DNA long term storage (1)
- DNA melting temperature (1)
- DNA protection (1)
- DNA reference material (1)
- DNA stability (1)
- DNA strand breaks (1)
- DNA strand-break (1)
- DNA vortexing (1)
- DNA-Sequence (1)
- DOTA (1)
- DPSS laser (1)
- DSB (1)
- DSC (1)
- DSM 5009 (1)
- DTAB (1)
- DVC (1)
- DVS (1)
- Damage Quantification (1)
- Damage localization (1)
- Damage-associated molecular patterns (DAMPs) (1)
- Darkfield imaging (1)
- Darr method (1)
- Data Analysis (1)
- Data Processing (1)
- Data curation (1)
- Data fitting (1)
- Data fusion (1)
- Data infrastructures (1)
- Data integration (1)
- Data reconstruction (1)
- Data science (1)
- Data-integration (1)
- De novo peptide sequencing (1)
- Debromination (1)
- Debye scattering equation (1)
- Debye-Waller parameter (1)
- Debye–Waller factor (1)
- Decay kinetics (1)
- Decision support (1)
- Deconvolution (1)
- Deep Convolutional Neural Network (DCNN) (1)
- Deep convolutional neural network (DCNN) (1)
- Deep learning segmentation (1)
- Deep learning-based tools (1)
- Deep stall (1)
- Deep unfolding (1)
- Defect (1)
- Defect characterisation (1)
- Defect evaluation (1)
- Definition (1)
- Degradation mechanisms (1)
- Degradation of polyethylene (1)
- Degradation studies (1)
- Dehydroxylation (1)
- Delamination (1)
- Delaminations (1)
- Delta isotope standard (1)
- Dendrite growth (1)
- Dendritic polyglycerol (1)
- Dendritic polyglycerol sulfate (1)
- Denoising Deblurring Sharpening (1)
- Density functional calculations (1)
- Density functional theory (1)
- Density separation (1)
- Dentin (1)
- Depht profiling (1)
- Depth profile (1)
- Depth resolved XANES (1)
- Design of experiment (1)
- Detail detection (1)
- Detection Assessments (1)
- Deterioration (1)
- Deuterium enriched water (1)
- Diagenesis (1)
- Diagnostic Antibodies (1)
- Diameter (1)
- Diastolic dysfunction (1)
- Diatomic molecule (1)
- Dichtungen (1)
- Dielectric ceramic (1)
- Dielectric properties (1)
- Dielectric spectroscopy (1)
- Diesel Particulate Filter Materials (1)
- Diesel exhaust (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Diffusion coefficient (1)
- Diffusion/diffusivity (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Digital Detector Array (DDA) (1)
- Digital Radiography (1)
- Digital Transformation (1)
- Digital Volume Correlation (1)
- Digital detector array (1)
- Digital light processing (1)
- Digital micromirror device (1)
- Digital radiography (1)
- Digital representations (1)
- Digital twin (1)
- Digital twins (1)
- Digital workflows (1)
- Digitale Transformation (1)
- Digitalisation (1)
- Digitisation (1)
- Dimensional metrology (1)
- Dimerization (1)
- Dimorphs (1)
- Dip-stick assay (1)
- Dipsersive XAS (1)
- Direct alcohol fuel cells (1)
- Direct metal assay (1)
- Direct/indirect photolysis (1)
- Disbond (1)
- Discharge arc (1)
- Discotic liquid crystals (1)
- Dislocation (1)
- Disorder (1)
- Disorganized bone (1)
- Disorientation (1)
- Dispersion (1)
- Dispersive XAS (1)
- Dispersive-XAS (1)
- Dissolution (1)
- Distributed fiber optic sensors (1)
- Dityrosine (1)
- Diversity (1)
- Docking (1)
- Dolomite (1)
- Double complex salts (1)
- Double strands (1)
- Double-multilayer monochromators (1)
- Double-pulse laserinduced breakdown spectroscopy (1)
- Down Stream Processing (1)
- Downstream processing (1)
- Drawings (1)
- Dried fig (1)
- Drilling resistance (1)
- Droplets (1)
- Drug Development (1)
- Drug Discovery (1)
- Drug delivery (1)
- Drug discovery (1)
- Drug transporters (1)
- Dry DNA (1)
- Drywood termite (1)
- Dual Energy Imaging (1)
- Dual-pulse (1)
- Duplex stainless steels (1)
- Dyad (1)
- Dye monomers (1)
- Dyes/pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic stall (1)
- Dynamic vapor sorption (1)
- E-aldoximes (1)
- EC definition of a nanomaterial (1)
- EC nanomaterial definition (1)
- EC/LC/MS (1)
- EC/MS (1)
- ECR (1)
- EDTAD (1)
- EDX (1)
- EFQM Excellence Modell (1)
- EFTEM (1)
- EMPIR (1)
- EP-3533 (1)
- EPR spectroscopy (1)
- ESCA (1)
- ESI-TOF-MS (1)
- ESMA (1)
- ESR (1)
- ETV (1)
- EU-WFD (1)
- EURAMET (1)
- EURAS (1)
- EXAFS (1)
- Early Earth (1)
- Earth material (1)
- Earthquake data (1)
- Ecotoxicity (1)
- Ecotoxicological Testing (1)
- Ecotoxicology testing (1)
- Ectoine DNA protection (1)
- Ectoine UV absorption (1)
- Ectoine hydration (1)
- Ectoine-DNA binding (1)
- Eddy Current (1)
- Eddy current (1)
- Effective gas diffusion coefficient (1)
- Eingnugsprüfung (1)
- Einzelzellanalyse (1)
- Elastic (1)
- Elastic net (1)
- Elasticity (1)
- Elastin-specific contrast agent ESMA (1)
- Elastin-specific molecular agent (1)
- Elastodynamic Finite Inegration Technique (1)
- Elastoplastic material parameters (1)
- Electrical resistivity (1)
- Electrochemical Reactor (1)
- Electrochemical catalysts (1)
- Electrochemical deposition (ECD) (1)
- Electrochemical energy conversion (1)
- Electrochemical oxidation (1)
- Electrochemical real-time mass spectrometry (1)
- Electrochemical sensing (1)
- Electrochemical titration (1)
- Electrochemistry mass spectrometry (1)
- Electromagnetic (1)
- Electron (1)
- Electron backscatter diffraction (1)
- Electron beam (1)
- Electron beam welding (1)
- Electron spectroscopy (1)
- Electron transfer (1)
- Electronic Lab Notebook (ELN) (1)
- Electronic nose (1)
- Electronic, Optical and Magnetic Materials (1)
- Electrons (1)
- Electrospinning (1)
- Elektronenmikroskopie (1)
- Element Specific Bioimaging Using Laser Ablation (1)
- Element-specific spectroscopy (1)
- Elemental Distribution (1)
- Elemental analysis (1)
- Elemental fingerprints (1)
- Elemental mapping (1)
- Embedded Sensors (1)
- Embedded humidity sensors (1)
- Embedded transducers (1)
- Emergency (1)
- Emerging brominated flame retardant (1)
- Emerging contaminants (1)
- Emerging/novel brominated flame retardant (1)
- Emission test chamber (1)
- Encapsulation (1)
- Endocrine disruptor (1)
- Endokrine Disruptoren (1)
- Energy dependent XPS (1)
- Energy dispersive X-ray spectroscopy (1)
- Energy storage (1)
- Engineered barrier (1)
- Enhancement (1)
- Enhancement strategy (1)
- Ensemble measurements (1)
- Entropy noise (1)
- Environmental analysis (1)
- Environmental impacts (1)
- Environmental pollutants (1)
- Environmental pollution monitoring (1)
- Enzyme activity (1)
- Equilibrium chemical modeling (1)
- Equivalent carbon number (1)
- Er(III) (1)
- Erfurt (1)
- Error correction (1)
- Esterification (1)
- Estrogen (1)
- Estrogens (1)
- Etalon feature (1)
- Ethanol in water (1)
- Etherification (1)
- Ethyl glucuronide (1)
- Ethylenediaminetetraacetic acid (1)
- Etofenprox (1)
- European Centre (1)
- European Reference Material (1)
- Evaporation (1)
- Evaporative drying (1)
- Ex vivo (1)
- Ex-situ (1)
- Ex-situ X-ray computed tomography (1)
- Excess surface work (1)
- Excited states (1)
- Exhaust (1)
- Existing Concrete Structures (1)
- Existing structure (1)
- Existing structures (1)
- Expansion (1)
- Experiment (1)
- Experimental design (1)
- Experimental setup (1)
- Expert system (1)
- Exploratory analysis (1)
- Explosives (1)
- Exposure (1)
- Extended X-ray absorption fine structure (1)
- Extended X-ray absorption fine structure (EXAFS), (1)
- Extractable organic fluorine (1)
- F- doping (1)
- FAIR (1)
- FAIR research data management (1)
- FLASH effect (1)
- FLIM (1)
- FMEA (1)
- FPLC (1)
- FT-IR (1)
- Far-infrared spectroscopy (1)
- Fast flow GD (1)
- Fast measurement (1)
- Fast scanning calorimetry (1)
- Fast single pulse response (1)
- Fatigue (1)
- Fatty acid desaturation (1)
- Fatty acid synthesis (1)
- Fatty acid uptake (1)
- Fatty acids (1)
- Fe nanoparticles metabolism (1)
- Fe-Ni oxides (1)
- FeNi (1)
- Feature selection (1)
- Features (1)
- Feedstock powder (1)
- Femtosecond laser (1)
- Fenton (1)
- Fenton Reaction (1)
- Fenton’s reagent (1)
- Fermi resonance (1)
- Ferroelectricity/ferroelectric materials (1)
- Fertilzer (1)
- Ferumoxytol (1)
- Festphasenextraktion (1)
- Festschrift (1)
- Fiber Bragg grating (FBG) (1)
- Fiber composites (1)
- Fiber optic sensing (1)
- Fiber-optic laser-induced breakdown spectroscopy (FO-LIBS) (1)
- Fiber-reinforced concrete (1)
- Field data (1)
- Field of view (1)
- Film (1)
- Film noise (1)
- Film system classification (1)
- Filter crucible (1)
- Finite Element Method (1)
- Finite Volume Method (1)
- Finow Canal (1)
- Fire spalling (1)
- Flash excitation (1)
- Flash lamp (1)
- Flat bottom holes (1)
- Flaw detection (1)
- Flourescin (1)
- Flow Chemistry (1)
- Flow injection immunoassay (1)
- Fluid dynamic model (1)
- Fluid-Structure Interaction (1)
- Fluidic devices (1)
- Fluoranthene (1)
- Fluorescence correlation spectroscopy FCS (1)
- Fluorescence intensity ratio (1)
- Fluorescence label (1)
- Fluorescence life time (1)
- Fluorescence sensing (1)
- Fluorescence spectroscopy (1)
- Fluorescence standard (1)
- Fluorescent dye (1)
- Fluorescent label (1)
- Fluorescent probe (1)
- Fluoride (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorination (1)
- Fluorine coordination polymers (1)
- Fluorolytic sol−gel (1)
- Fluorophilic interactions (1)
- Fluorophore (1)
- Fluorouracil (1)
- Fluxomics (1)
- Flying line thermography (1)
- Folic acid (1)
- Food Analysis (1)
- Food contaminants (1)
- Food fermentation (1)
- Food safety (1)
- Foodstuffs (1)
- Force-distance-curve (1)
- Formaldehyde (1)
- Formulation additives (1)
- Forsterite (1)
- Fow injection analysis (1)
- Fracture (1)
- Fragmentation (1)
- Fragmentation activation (1)
- Freezing (1)
- Frost salt attack (1)
- Fuel (1)
- Fullerene-Polyglycerol Sulfates (1)
- Fully aromatic frameworks (1)
- Functional group analysis (1)
- Functional group quantification (1)
- Functionalization (1)
- Functionalized nanographene (1)
- Functionally graded porous scaffolds (1)
- Functionally graded porous structure (1)
- Fundamentals (1)
- Fungicide (1)
- Funtional Groups (1)
- Fusarium (1)
- Fusarium mycotoxin (1)
- GC-FID (1)
- GD-MS (1)
- GF-MAS (1)
- GMAW (1)
- GMR sensors (1)
- GPA (1)
- Gadolinium-based contrast agent (1)
- Gadolinium-based contrast agents (GBCAs) (1)
- Gadovist (1)
- Gamma ray (1)
- Gas analysis (1)
- Gas discharges (1)
- Gas separation (1)
- Gas transport in porous media (1)
- Gas-phase reactions (1)
- Gaschromatographie (1)
- Gaseous reactants (1)
- Gasoline (1)
- Gated hybrid material (1)
- Gd-DOTA (1)
- Gel electrophoresis (1)
- Gene five protein (1)
- General Medicine (1)
- Genetics (1)
- Genotoxic and oxidative damage (1)
- Geochemistry (1)
- Geochemistry and Petrology (1)
- Geological material (1)
- Geometrical deviation (1)
- Geometrical magnification (1)
- Geophysics (1)
- Geosciences (1)
- Geothermal energy (1)
- Germanium chlorides (1)
- Germanium sulfide (1)
- Gerätekommunikation (1)
- Ggadolinium (1)
- Giant magneto resistance (GMR) (1)
- Gilding (1)
- Github (1)
- Glass Support (1)
- Glass-ceramic (1)
- Glasses (1)
- Glue (1)
- Glycan microarray (1)
- Glycans (1)
- Glycerol (1)
- Glycolide (1)
- Glycosaminoglycan (1)
- Goethite (1)
- Gold nanocluster (1)
- Gold nanoclusters (1)
- Gold nanoparticles (1)
- Gradient elution (1)
- Grafting (1)
- Grain boundary (1)
- Grain sizes (1)
- Graph databases (1)
- Graph learning (1)
- Graphen Oxide (1)
- Graphene oxide (1)
- Graphene related two-dimensional materials (GR2M) (1)
- Graphene template (1)
- Graphene-based polyglycerol sulfates (1)
- Graphene–bacteria interaction (1)
- Graphhene (1)
- Graphical model (1)
- Graphit (1)
- Graphite (1)
- Graphitization (1)
- Grating method (1)
- Grazin exit XANES (1)
- Grazing incidence small-angle neutron scattering (1)
- Greek curse tablets (1)
- Green chemistry (1)
- Green light excitation (1)
- Green rust (1)
- Green synthesis (1)
- Ground Penetrating Radar (1)
- Group profile (1)
- Guest uptake/release (1)
- Gypsum (1)
- Gypsum dehydration (1)
- H-terminated Si3N4 films (1)
- H2O2 (1)
- H3PO3 (1)
- H3PO4 life cycle (1)
- HCD (1)
- HERFD-XAS (1)
- HF (1)
- HF free Digestion (1)
- HKUST-1 (1)
- HLA (1)
- HPLC-DAD/FLD (1)
- HPLC-ICP-MS (1)
- HPLC-MS (1)
- HPLC–MS (1)
- HR-CS-GFMAS (1)
- HT22 (1)
- HTS (1)
- Hafnium (1)
- Hairpin (1)
- Half-Cell Potential Mapping (1)
- Hard x-ray photoelectron spectroscopy (1)
- Hard-energy X-ray photoelectron spectroscopy (1)
- Harsh environment (1)
- Hay fever (1)
- Hazard assessment (1)
- Hazardous substances (1)
- HeLa (1)
- Heart attack (1)
- Heat flow (1)
- Heat maps (1)
- Heavy chains (1)
- Heavy crude oil (1)
- Heavy metals (1)
- Hellenistic (1)
- Hematite (1)
- Hemihydrate (1)
- Hepatocellular carcinoma (1)
- Herculaneum papyri (1)
- Heterogeneity (1)
- Heterogeneous (1)
- Heterogeneous catalysis (1)
- HexaHis-Tag (1)
- Hexabenzocoronenes (1)
- Hierarchical cluster analysis (1)
- Hierarchically porous (1)
- High Strength Concrete (1)
- High pH (1)
- High pressure (1)
- High pressure experiments (1)
- High purity (1)
- High resolution (1)
- High specific surface area (1)
- High temperature corrosion (1)
- High-Speed (1)
- High-Speed Separations (1)
- High-entropy alloy (1)
- High-entropy alloys (1)
- High-fired gypsum (1)
- High-frequency arc discharge (1)
- High-order transition elements (1)
- High-purity elements (1)
- High-resolution continuum source graphite furnace atomic absorption spectrometry (1)
- High-resolution continuum source molecular absorption spectrometry (1)
- High-resolution synchrotron XRF (1)
- High-temperature fuel cells (1)
- Highly permeably polynorbornenes (1)
- Hilbert transform (1)
- His6 (1)
- His8 (1)
- Histidine (1)
- Histology (1)
- History of Art (1)
- Holzschutzmittel (1)
- Homogeneity (1)
- Hormone (1)
- Host-guest interaction (1)
- Host–guest systems (1)
- Hot electrons (1)
- Hot-electrons (1)
- Hot-pressing (1)
- Human Factors (1)
- Human Plasma (1)
- Human error (1)
- Human papillomavirus (1)
- Human serum albumin (1)
- Human umbilical cell adhesion (1)
- Human-FMEA (1)
- Hybrid Explosions (1)
- Hybrid metrology measurement (1)
- Hybridization (1)
- Hybridoma (1)
- Hydantoin (1)
- Hydrated silicate melts (1)
- Hydrochloric acid (1)
- Hydrodynamic chromatography (HDC) (1)
- Hydrodynamic model (1)
- Hydrofluorination (1)
- Hydrogen Storage (1)
- Hydrogen adsorption (1)
- Hydrogen adsorption storage (1)
- Hydrogen assisted cracking (1)
- Hydrogen bonding (1)
- Hydrogen embrittlement (1)
- Hydrogen evolution reaction (1)
- Hydrogen generation (1)
- Hydrogen photoproduction (1)
- Hydrogen uptake reproducibility (1)
- Hydrogenated nanostructures (1)
- Hydrolysis products (1)
- Hydrolytic resistance (1)
- Hydrophilic interaction chromatography (1)
- Hydrophobicity (1)
- Hydrothermal fluid (1)
- Hydroxyl radicals (1)
- Hydroxylation (1)
- Hyperbranched (1)
- Hyperthermia (1)
- Hyphenated (1)
- Hypothalamus (1)
- ICP (1)
- ICP MS (1)
- ICP-AES (1)
- ICP-MS/MS (1)
- ICP-TOF-MS (1)
- ICP-TOFMS (1)
- ICP-ToF-MS (1)
- IDMS (1)
- IMAC purification (1)
- INADEQUATE (1)
- IR (1)
- IR spectroscopy; conductometry (1)
- ISO 16000-6 (1)
- ISO 23173 (1)
- ISO REMCO (1)
- Identity (1)
- IgG determination (1)
- IgY (1)
- Iinductively coupled plasma mass spectrometry (1)
- Iinter-laboratory comparison (1)
- Illuminance (1)
- Image Quality (1)
- Image evaluation (1)
- Image-based models (1)
- Imaging AES (1)
- Imaging SIMS (1)
- Imaging Technique (1)
- Imaging ellipsometry (1)
- Imidazole (1)
- Immunoassays (1)
- Immunofluorescence (1)
- Immunology (1)
- Immunometric assay (1)
- Immunometric biosensor (1)
- Immunoprecipitation (1)
- Impact (1)
- Impact Echo (1)
- Impact damage (1)
- Impact diamonds (1)
- Impact echo (1)
- Impact of standards (1)
- Implant material (1)
- Impurites (1)
- Impurity assessment (1)
- In Memoriam (1)
- In situ EXAFS (1)
- In situ Raman (1)
- In situ SAXS/WAXS (1)
- In situ X-ray diffraction (1)
- In situ coupling (1)
- In situ diffraction (1)
- In vitro (1)
- In vivo (1)
- In-air ranging (1)
- In-house calibration solution (1)
- In-situ Computed Tomography (1)
- In-situ polymerization (1)
- In-situ testing (1)
- In-vivo (1)
- Indentation (1)
- Indirect Hard Modeling (1)
- Indirect combustion noise (1)
- Individual cell tracking (1)
- Induced polarization (1)
- Inductively Coupled Mass Spectroscopy (1)
- Inductively coupled plasma (1)
- Inductively coupled plasma mass spectroscopy (1)
- Inductively‑coupled mass spectrometry (1)
- Industrial CT (1)
- Industrial gypsum (1)
- Industrial internet of things (1)
- Industrie 4.0 (1)
- Industry 4.0, (1)
- Inelastic background (1)
- Inert gases (1)
- Inflammation (1)
- Influenza A virus (1)
- Information Security (1)
- Information security management system (ISMS) (1)
- Infrared light (1)
- Infrared nano AFM (1)
- Infrared spectroscopy (1)
- Infrastructure (1)
- Ink analysis (1)
- Inlet ionization (1)
- Inline NMR Spectroscopy (1)
- Inorganic chemical analysis (1)
- Inorganic polymers (1)
- Insecticide (1)
- Inspection design and planning (1)
- Instantaneous wavenumber analysis (1)
- Institutional theory (1)
- Instrument Communication (1)
- Instrumental isotope fractionation (1)
- Insulation (1)
- Integrated Processes (1)
- Integration sphere spectroscopy (1)
- Intellectual property rights (IPR) (1)
- Intensity scale calibration (1)
- Interaction with atmospheres (1)
- Interactions (1)
- Interferometry (1)
- Interlaboratory comparability (1)
- Interlaboratory experiment (1)
- Interlaboratory key comparison (1)
- Interlaboratory study (1)
- Interlabority comparison (1)
- Interlayer delay (1)
- Intermediate phases (1)
- Intermixing (1)
- Intermodulation (1)
- Intermodulation AFM (1)
- Internal standard (1)
- Interoperability (1)
- Interphase (1)
- Interpretable machine learning (1)
- Intrinsic OER activity (1)
- Inverse Problem (1)
- Inverse analysis (1)
- Inverse problems (1)
- Inverted classroom (1)
- IoT (1)
- Iodine (1)
- Ion beam therapy (1)
- Ionic liquid crystal (1)
- Ionisation (1)
- Ionmobility spectrometry (1)
- Ionophore (1)
- Ionophore antibiotics (1)
- Iposomes (1)
- Iridium (1)
- Iridium-titanium mixed oxides (1)
- Iron Complex (1)
- Iron carbide (1)
- Iron deficiency (1)
- Iron disorders (1)
- Iron nanoparticles (1)
- Iron nitride (1)
- Iron speciation (1)
- Irradiation (1)
- Isotope Dilution (1)
- Isotope Labelling (1)
- Isotope amount ratio (1)
- Isotope delta (1)
- Isotope delta value (1)
- Isotope fractionation (1)
- Isotope-labeled (1)
- Isotopes (1)
- Isotopic analysis (1)
- Isotopic dilution (1)
- Isotopologue Distribution (1)
- Iterative method (1)
- Iterative real-time optimization (1)
- Iterative shrinkage thresholding (1)
- Jacobsen-Stockmayer theory (1)
- Jahrestag (1)
- Job plot (1)
- K+ doped (1)
- K-nearest neighbor (1)
- K-rich Birnessite (K0.45MnO2) (1)
- Katalysator (1)
- Kidney (1)
- Kikuchi pattern (1)
- Kikuchi patterns (1)
- Kilogram (1)
- Kinetics from experiments (1)
- Kjeldahl (1)
- Kläranlage (1)
- Knoevenagel condensation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Knudsen diffusion (1)
- Knufia petricola (1)
- Konjugate (1)
- L-alanine (1)
- L-lactide (1)
- LA-(MC-)ICP-MS (1)
- LA-ICP-SFMS (1)
- LA/ICP-MS Imaging (1)
- LC-MS (1)
- LC-UV absorbance (1)
- LC/HRMS (1)
- LET (1)
- LIDB plasma (1)
- LIF (1)
- LOD (1)
- LSVEC (1)
- Lab of the Future (1)
- Lab-on-a-Chip (1)
- Labeling (1)
- Labor der Zukunft (1)
- Laboratory 4.0 (1)
- Laboratory tests (1)
- Lactate (1)
- Lacunae (1)
- Lacunary Keggin ion (1)
- Ladder sequencing (1)
- Lanthanide-doped nayf-4 (1)
- Lanthanides (1)
- Lanthanides doped coordination polymers (1)
- Lanthanoide (1)
- Large-scale processing (1)
- Lasalocid (1)
- Laser Desorption (1)
- Laser Doppler Vibrometer (1)
- Laser Powder Bed Fusion (PBF-LB/M, L-PBF) (1)
- Laser ablation inductively coupled plasma–mass spectrometry imaging (LA-ICP-MSI) (1)
- Laser ablation-inductively coupled plasma-mass spectrometry (1)
- Laser ablation-inductively coupled plasma-mass spectroscopy (1)
- Laser beam welding (1)
- Laser direct writing (1)
- Laser excitation (1)
- Laser heating (1)
- Laser induced breakdown (1)
- Laser induced breakdown Spectrocopy (LIBS) (1)
- Laser induced breakdown spectroscopy (1)
- Laser induced dielectric breakdown, Hydrogen reduction (1)
- Laser metal deposition (1)
- Laser metal deposition (LMD) (1)
- Laser powder bed fusion (PBF-LB/M, L-PBF) (1)
- Laser scanning (1)
- Laser-Induced Breakdown Spectroscopy (LIBS) (1)
- Laser-induced breakdown spectroscopy (LIBS) (1)
- Laser-induced dielectric breakdown (LIDB) (1)
- Lasers (1)
- Lateral flow assay (1)
- Lateral flow test (1)
- Laterally-resolved (1)
- Layer-by-Layer (1)
- Layer-by-layer deposition (1)
- Layers (1)
- Lead (1)
- Lead ions (1)
- Lead isotope composition (1)
- Lead isotope ratios (1)
- Lead isotope variations (1)
- Lead isotopes (1)
- Lead-free ceramics (1)
- Lebensmittel (1)
- Lecture films (1)
- Legacy pollution (1)
- Level of detection (1)
- Library (1)
- Lifetime analysis (1)
- Lifetime encoding (1)
- Lifetime, synthesis (1)
- Lifetime-encoded beads (1)
- Ligand design (1)
- Ligand exchange (1)
- Light chain (1)
- Light chains (1)
- Limited data (1)
- Linear polyglycerol (1)
- Liner (1)
- Linked open data (1)
- Lipid metabolism (1)
- Liquefied Hydrogen (1)
- Liquefied Natural Gas (1)
- Liquefied hydrogen (1)
- Liquefied natural gas (1)
- Liquids (1)
- Liver X receptor (1)
- Lluminescence (1)
- Local resonance (1)
- Local wavenumber analysis (1)
- Lock-in (1)
- Lock-in excitation (1)
- Locked nucleic acids (1)
- Log-normal distribution (1)
- Longst luminescence lifetime (1)
- Lonsdaleite (1)
- Low carbon steel (1)
- Low-Energy (1)
- Low-cost (1)
- Low-density polyethylene (1)
- Low-density polyethylene (LDPE) (1)
- Luminescence lifetime (1)
- Luminol (1)
- Lung cancer (1)
- Lymnaea stagnalis (1)
- Lysergic acid hydrazide (1)
- Lysosome (1)
- MALDI Imaging MS (1)
- MALDI-ToF-MS (1)
- MAS NMR spectroscopy (1)
- MATLAB (1)
- MC-TIMS (1)
- MCC (1)
- MCNP (1)
- MDCK cell (1)
- MIC (1)
- MICAP-MS (1)
- MIMO (1)
- MLCT (1)
- MLI (1)
- MOSH/MOAH (1)
- MR Angiography (1)
- MR imaging (1)
- MRT (1)
- MS (1)
- MS/MS (1)
- MST (1)
- Macrocycles (1)
- Macrocyclus (1)
- Macrophagen (1)
- Macrophages (1)
- Macropores (1)
- Magnesium (1)
- Magnesium carbonates (1)
- Magnesium isotope ratios (1)
- Magnetic Methods (1)
- Magnetic nanocatalyst (1)
- Magnetically stabilized (1)
- Magnetism (1)
- Magnetometry (1)
- Magnetoresistive sensor (1)
- Magnetpartikel (1)
- Maia detector (1)
- Maillard reaction (1)
- MamaLoCa (1)
- Management science and operations research (1)
- Management system standards (1)
- Mapping (1)
- Marine corrosion (1)
- Martensite (1)
- Martin Seah (1)
- Mass contents (1)
- Mass cytometry (1)
- Mass spectrometry imaging (1)
- Mass-Spectral Reconstruction (1)
- Mass-spectrometry (1)
- Material Moisture (1)
- Material Science (1)
- Material engineering (1)
- Material sciences (1)
- Material-binding Peptides (1)
- Materials Characterization (1)
- Materials Stability (1)
- Materials analysis (1)
- Materials evaluation (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrices (1)
- Matrix independent calibration (1)
- Matrix-assisted laser desorption ionization–mass spectrometry imaging (MALDI-MSI) (1)
- Matrixeffekte (1)
- Measurement Uncertainty (1)
- Measuremment uncertainty (1)
- Mechanical Load (1)
- Mechanical stress (1)
- Mechanical waves (1)
- Medical diagnostics (1)
- Medicinal application (1)
- MefHySto (1)
- Melanoidin (1)
- Melanoidine (1)
- Membrane polymers (1)
- Mercury intrusion porosimetry (1)
- Mercury speciation (1)
- Meso Portland cement (1)
- Mesocellular foam (1)
- Mesocrystal (1)
- Mesopores (1)
- Mesoporous SiO2-CaO nanoparticles (1)
- Mesoporous Silica (1)
- Mesoporous iridium oxide films (1)
- Mesoporous materials (1)
- Mesoporous particles (1)
- Mesoporous phosphate-based glasses (1)
- Mesoporous thin films (1)
- Meta-Omics (1)
- Metabolic Flux (1)
- Metabolization (1)
- Metal (1)
- Metal Matrix Composite (MMC) (1)
- Metal carbides (1)
- Metal cluster (1)
- Metal ions (1)
- Metal labeling (1)
- Metal matrix composite (MMC) (1)
- Metal matrix composites (1)
- Metal matrix composites (MMC) (1)
- Metal nanoclusters (1)
- Metal nanoparicels (1)
- Metal phosphonates (1)
- Metal toxicity (1)
- Metal uptake (1)
- Metal vapor (1)
- Metal-organic frameworks (1)
- Metal-organic polyhedra (1)
- Metalloprotein (1)
- Metal– organic frameworks (1)
- Metamaterial (1)
- Metamaterials (1)
- Metformin (1)
- Methane Oxidation (1)
- Methane removal (1)
- Methane total oxidation (1)
- Methanol oxidation (1)
- Methyl group rotation (1)
- Methylmercury (1)
- Metoligotoma (1)
- Metrology in Chemistry and Biology (1)
- Mg1-xZnxTiO3 (1)
- Micellar chromatography (1)
- Micelle (1)
- Micro heterogeneity (1)
- Micro hollow cathode discharge (1)
- Micro-Hydrocyclone (1)
- Micro-comuted tomography (µCT) (1)
- Micro-sublimation (1)
- MicroXRF (1)
- Microanalysis (1)
- Microarray printing (1)
- Microbe interactions (1)
- Microbeads (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological measurement (1)
- Microcracked ceramics (1)
- Microcracking (1)
- Microdialysis (1)
- Microdroplet generator (1)
- Microencapsulation (1)
- Microfabrication (1)
- Microfluidic Chip (1)
- Microfluidic system (1)
- Microorganism (1)
- Microparticle (1)
- Microparticles (1)
- Microplastic analysis (1)
- Microplastic pathways (1)
- Microplastic-induced effects (1)
- Microplastics analytic (1)
- Microplastics reference material (1)
- Microplatic (1)
- Microporous polymers (1)
- Microscope slides (1)
- Microspheres (1)
- Microstructure characterization (1)
- Microwave (1)
- Microwave inductively coupled atmospheric pressure mass spectrometry (MICAP-MS) (1)
- Microwave-assisted synthesis (1)
- Mikroplastik (1)
- Mikroplastik Massegehalt (1)
- Milling (1)
- Mineral identification (1)
- Mineral oil hydrocarobons (1)
- Mineral paragenesis (1)
- Mineral tranformation (1)
- Minerals (1)
- Mineralölkohlenwasserstoffe (1)
- Miniaturization (1)
- Misorientation (1)
- Missing fragmentation sites (1)
- Missing wedge (1)
- Mixed conductors (1)
- Mixed ink (1)
- Mixed metal oxide (1)
- Mixed-ligand MOFs (1)
- Mixture toxicity (1)
- MoF6 (1)
- Mobile analysis (1)
- Mobile analytics (1)
- Modeling (1)
- Modellierung (1)
- Modified U-Net architectures (1)
- Modified U-net architectures (1)
- Modified mycotoxins (1)
- Modifier adaptation (1)
- Modulation transfer function (1)
- Moisture distribution (1)
- Mole (1)
- Molecular Biology (1)
- Molecular MRI (1)
- Molecular Organic Frameworks (1)
- Molecular VOx catalysts (1)
- Molecular analysis (1)
- Molecular beacon (1)
- Molecular dynamics simulations (1)
- Molecular emission (1)
- Molecular imprinted polymers (1)
- Molecular imprinting (1)
- Molecular marker (1)
- Molecular recognition (1)
- Molecular semiconductor (1)
- Molecular spectra (1)
- Molecular-MRI (1)
- Molybdenum (1)
- Molybdenum boride (1)
- Molybdenum carbide (1)
- Monensin (1)
- Monoclonal Antibodies (1)
- Monoclonal Antibody (1)
- Monoclonal antibodies (1)
- Monolith (1)
- Monolithic column (1)
- Monomer (1)
- Monoterpene (1)
- Monte Carlo algorithm (1)
- Monte Carlo simulation (1)
- Mounting media (1)
- Moxidectin (1)
- Mud volcanoe fluids (1)
- Multi photon lithography (1)
- Multi-collector inductively coupled plasma-mass spectrometry (ICP-MS) (1)
- Multi-dimensional reconstruction (1)
- Multi-element analysis (1)
- Multi-layers (1)
- Multi-omics (1)
- Multi-principal element alloy (1)
- Multi-sample analysis (1)
- Multichannel analysis of surface waves (MASW) (1)
- Multilayer Insulation (1)
- Multiphoton lithography (1)
- Multiple sclerosis (1)
- Multiple-injection sample-standard bracketing (1)
- Multiplet (1)
- Multivalency (1)
- Multivariate Statistics (1)
- Multivariate analyses (1)
- Multivariate analysis (1)
- Multivariate analysis methods (1)
- Multivariate calibration (1)
- Multivariate data analysis (1)
- Multivariate methods (1)
- Muon (1)
- Mussel-inspired dendritic polyglycerol (MI-dPG) (1)
- Mutual calibration (1)
- Mycotoxin Analysis (1)
- Mössbauer Spectroscopy (1)
- Müllverbrennung (1)
- N-Chlorination (1)
- NIR Spectroscopy (1)
- NIR emitter (1)
- NIR imaging (1)
- NIR spectroscopy (1)
- NIR-II fluorescence (1)
- NIRII (1)
- NIST (1)
- NIST-mAb 8671 (1)
- NMF (1)
- NMR Spectroscopy (1)
- NMR probe Development (1)
- Nafion 117 (1)
- Naica (1)
- Nanaoparticle (1)
- Nanaoparticles (1)
- Nano particles (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-carrier (1)
- Nano-safety (1)
- NanoSIMS (1)
- Nanobiointerfaces (1)
- Nanocasting (1)
- Nanocluster (1)
- Nanocomposite fibers (1)
- Nanoconfinement (1)
- Nanocrystals (1)
- Nanodosimetry (1)
- Nanoinformatics (1)
- Nanolenses (1)
- Nanomaterial analysis (1)
- Nanomaterial design (1)
- Nanomechanical properties (1)
- Nanometrology (1)
- Nanoparticle concentration (1)
- Nanoparticle dimers (1)
- Nanoparticle structure (1)
- Nanoparticle synthesis (1)
- Nanoparticles with same nominal diameter (1)
- Nanoplatelet (1)
- Nanoplatform (1)
- Nanopores (1)
- Nanoporous (1)
- Nanoporous carbon (1)
- Nanorods (1)
- Nanosafety (Safe-by-design) (1)
- Nanosciences (1)
- Nanostructure (1)
- Nanostructure quantification (1)
- Nanostructured material (1)
- Nanostructures (1)
- Nano‐object characterization (1)
- Naphthalene (Nap) (1)
- Narrow line method (1)
- Natural stones (1)
- Near edge X-ray absorption fine structure (1)
- Near edge X-ray absorption fine structure spectroscopy (1)
- Near-ambient pressure (1)
- Near-ambient pressure X-ray photoelectron spectroscopy (1)
- Near-infrared light (1)
- Near-infrared refectography (1)
- Nebulization (1)
- Network (1)
- Network science (1)
- Networking (1)
- Neural networks (1)
- Neutron Bragg edge imaging (1)
- Neutron Imaging (1)
- Neutron Scattering (1)
- Neutron instrument (1)
- Neutron radiography (1)
- Neutron reflectometry (1)
- Neutron tomography (1)
- Newton Raphson method (1)
- Nickel chelate (1)
- Nickel nanoparticles (1)
- Nile Red (1)
- Nitinol (1)
- Nitration (1)
- Nitrene[2+1]cycloaddition (1)
- Nitrification inhibitor (1)
- Nitrogen (1)
- Nitrogen dioxide (1)
- Nitrogen microwave inductively coupled atmospheric pressure mass spectrometry (1)
- Nitrogen monoxide (1)
- Nitrogen plasma (1)
- Nm film thickness (1)
- Nobel-metal free electrocatalysis (1)
- Noise (1)
- Noise in image (1)
- Noise simulation (1)
- Non Destructive Testing (1)
- Non destructive testing (1)
- Non lienear processes (1)
- Non linear dynamics (1)
- Non-Destructive Evaluation (1)
- Non-Destructive Testing (1)
- Non-Destructive Testing (NDT) (1)
- Non-classical crystallization theory (1)
- Non-destructive Testing (1)
- Non-destructive ambient analysis (1)
- Non-destructive characterisation (1)
- Non-destructive evaluation (1)
- Non-destructive testing in civil engineering (1)
- Non-destructive testing of concrete (1)
- Non-invasive (1)
- Non-invasive glucose sensing (1)
- Non-linear finite element modelling (1)
- Non-metal analysis (1)
- Non-negative matrix factorization (1)
- Non-spherical (1)
- Non-spherical nanoparticles (1)
- Non-targeted analysis (1)
- Non-thermally coupled levels (1)
- Non-vitriolic iron-gall inks (1)
- Nondestructive testing (NDT) (1)
- Nonferrous slag (1)
- Noninvasive glucose sensing (1)
- Nonporous SiO2 (1)
- Normung (1)
- Notches (1)
- Nuclear Magnetic Resonance Spectroscopy (1)
- Nuclear magnetic resonance spectroscopy (1)
- Nuclear receptor (1)
- Nucleation (1)
- Nucleobase (1)
- Nucleocapsid (1)
- Numerical Methods (1)
- Numerical Modelling (1)
- Numerical modelling (1)
- Numerical models (1)
- OBOC library (1)
- OECD (1)
- OER (1)
- OH (1)
- OH radicals (1)
- OH scavenger (1)
- OMS (1)
- Oberflächenwasser (1)
- Obituary (1)
- Ochratoxin A (1)
- Oil (1)
- Oligonucleotide (1)
- Oligonucleotide fragmentation (1)
- On-chip screening (1)
- On-line CE/MC-ICP-MS (1)
- On-site detection (1)
- One-bead-one-compound library (1)
- Online NMR Spectroscopy (1)
- Online biosensor (1)
- Online monitoring (1)
- Ontologies (1)
- Ontology Engineering (1)
- Opaque materials (1)
- Open data (1)
- Open data on zenodo (1)
- Open science (1)
- Operando (1)
- Optical Spectrometry (1)
- Optical fibers (1)
- Optical microphone (1)
- Optical quantification (1)
- Optical temperature sensing (1)
- Optically excited lock-in thermography (1)
- Optoelectronics (1)
- Optofluidics (1)
- Orbitrap (1)
- Ordered mesoporous carbon (1)
- Ordered mesoporous silica (1)
- Ore provenance (1)
- Organic Synthesis (1)
- Organic calibration solution (1)
- Organic contaminants (1)
- Organic polymers (1)
- Organic/inorganic block copolymer (1)
- Organic–inorganic nanostructures (1)
- Organizational resilience (1)
- Orientation precision (1)
- Orientation refinement (1)
- Oriented immobilization (1)
- Osmolyte (1)
- Osmotic minipumps (1)
- Osteoporosis (1)
- Outburst floods (1)
- Outdoor odor emissions (1)
- Ovarian cancer (1)
- Ovariectomy (1)
- Oven drying (1)
- Oxidative metabolism (1)
- Oxocobaltates (1)
- Oxygen Evolution Catalyst (1)
- Oxygen Evolution Reaction (1)
- Oxygen Reduction Reaction (1)
- Oxygen isotope ratios (1)
- Ozone (1)
- P-aminothiophenol (1)
- P. Fluorescens (1)
- PAH (1)
- PAHs (1)
- PBS (1)
- PCA (1)
- PCCA+ (1)
- PDF (1)
- PECVD (1)
- PEG (1)
- PES (1)
- PGM-free catalyst (1)
- PH monitoring in concrete (1)
- PIC technology (1)
- PIFE (1)
- PLS regression (1)
- POD (1)
- PQQ (1)
- PS (1)
- PTFE (1)
- PVDF-Based membrane (1)
- PVDF-based membrane (1)
- Packing density (1)
- Painting (1)
- Palaeoanthropology (1)
- Pants (1)
- Parameter optimization (1)
- Partial Least Squares Regression (1)
- Partial least square discriminant analysis (PLS-DA) (1)
- Partial pore saturation (1)
- Partial safety factor modification (1)
- Particle Characterization (1)
- Particle architecture (1)
- Particle motion trajectory (1)
- Particle scatterin simulations (1)
- Particle synthesis (1)
- Passive sampling (1)
- Path-based analysis (1)
- Pattern recognition receptor (1)
- Pb isotopes (1)
- Pd(II) (1)
- Peer review (1)
- Pelletization (1)
- Penalty Parameter (1)
- Pentafluorophosphates (1)
- Pentaphenes (1)
- Peptide Library (1)
- Peptide aptamers (1)
- Peptide identification (1)
- Peptide library screening (1)
- Peptide losses (1)
- Peptide mass fingerprinting (1)
- Peptide probe (1)
- Peptides (1)
- Peptides and Proteins (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Performance check (1)
- Peristaltic pumps (1)
- Perlite (1)
- Perovskites (1)
- Peroxidase (1)
- Ph (1)
- Pharmaceutical (1)
- Pharmaceutical Science (1)
- Pharmacy (1)
- Pharmazeutika (1)
- Phase Imaging (1)
- Phase field method (1)
- Phase-contrast microscopy (1)
- Phased array (1)
- Phenanthrene (1)
- Phenolic acid (1)
- Phenothrin (1)
- Phenylketonuria (1)
- Phorsphorescence (1)
- Phosphates (1)
- Phosphinine (1)
- Phospholipids (1)
- Phosphonate esters (1)
- Phosphor (1)
- Phosphorescence (1)
- Phosphorus plant-availability (1)
- Phosphorus recovery (1)
- Phosphotyrosine Biomimetics (1)
- Photo-transformation products (1)
- Photoacoustic characterization (1)
- Photocatalysis (1)
- Photocatalytic activity (1)
- Photocatalytic reduction (1)
- Photochromism (1)
- Photodynamische Inaktivierung (1)
- Photoelectrochemistry (1)
- Photoemission (1)
- Photoinduced electron transfer (1)
- Photokatalyse (1)
- Photon Counting Detectors (1)
- Photon counting detector (1)
- Photonic biosensor (1)
- Photons (1)
- Photophysic (1)
- Photoplethysmography (1)
- Photosensibilisator (1)
- Photosensitization (1)
- Photosensitizer (1)
- Photoswitchable monolayers (1)
- Photothermal (1)
- Photothermal Technique (1)
- Photothermal imaging (1)
- Photothermal super resolution (1)
- Phthalocyanin (1)
- Phylogeny (1)
- Physical aging (1)
- Physical and chemical processes (1)
- Physical and theoretical chemistry (1)
- Physical twin (1)
- Physico-chemical characterisation of minerals (1)
- Physics and society (1)
- Physisoprtion (1)
- Phytoliths (1)
- Piaui state (1)
- Piezoelectric transducer (1)
- Pigment (1)
- Pile testing (1)
- Pilot comparison (1)
- Pink beams (1)
- Pipelines (1)
- Planck function (1)
- Plant tissue (1)
- Plant-model mismatch (1)
- Plants (1)
- Plasma acoustics (1)
- Plasma deposition (1)
- Plasma expansion (1)
- Plasma imaging (1)
- Plasma induced luminescence (1)
- Plasma physics (1)
- Plasma-induced luminescence (1)
- Plasmaspectrochemistry (1)
- Plasmid DNA (1)
- Plasmon-catalyzed reactions (1)
- Plasmonic heating (1)
- Plastic bottles (1)
- Plasticity (1)
- Plastics (1)
- Platinum (1)
- Platinum-ruthenium colloid (1)
- Plethysmographic skin imaging (1)
- Polarised light microscopy (1)
- Polarization spectroscopy (1)
- Polishing (1)
- Pollen extract (1)
- Pollen grains (1)
- Pollutant (1)
- Pollution (1)
- Polycarbonate-co-dimethylsiloxane copolymer (1)
- Polyclonal Antibodies (1)
- Polycondensation (1)
- Polycyclic aromatic hydrocarbons (1)
- Polycyclic aromatic hydrocarbons PAH (1)
- Polyelektrolyt (1)
- Polyethylene glycol (PEG)-grafting antifouling surface (1)
- Polyethylenimine (1)
- Polymer based Nanocomposites (1)
- Polymer blends (1)
- Polymer electrolyte fuel cell (1)
- Polymer membrane (1)
- Polymer of intrisic microporosity (1)
- Polymer-binding Peptides (1)
- Polymere (1)
- Polymerization (1)
- Polymers of intrinsic microporosity (1)
- Polymorph (1)
- Polymorphs (1)
- Polyneoptera (1)
- Polynorbornenes (1)
- Polynorbornes (1)
- Polyoxocation (1)
- Polyoxometalates (1)
- Polypropylene (1)
- Polysaccharides (1)
- Polyurethan (1)
- Polyurethanes (1)
- Pore fluids (1)
- Pore segmentation (1)
- Pore size (1)
- Pore size distribution (1)
- Pore size tailoring (1)
- Pore space characterization (1)
- Pore volume distribution (1)
- Porosity prediction (1)
- Porous building materials (1)
- Porous carbon (1)
- Porous concrete (1)
- Porous thin films (1)
- Porphyrin (1)
- Portfolio (1)
- Portland clinker (1)
- Position of carboxylate group (1)
- Positron emission tomography (1)
- Post weld heat treatment (1)
- Post-modification by L-cysteine (1)
- Powder (1)
- Powder bed fusion (1)
- Powder diffraction (1)
- Powder removal (1)
- Precipitation (1)
- Precision agriculture (1)
- Prediction relative (1)
- Predictive maintenance (1)
- Predictive modelling (1)
- Preferential exclusion (1)
- Preprocessing (1)
- Presolvated electron (1)
- Pressure (1)
- Pressure Vessels (1)
- Prestressed concrete (1)
- Preventive Innovation (1)
- Priam's treasure (1)
- Prill (1)
- Primary calibration solution (1)
- Primary difference measurement method (PDM) (1)
- Primary transfer standards (PTSs) (1)
- Primer (1)
- Principal component analysis (1)
- Principal component analysis (PCA) (1)
- Principal stress (1)
- Priority effect (1)
- Probabilistic (1)
- Probabilistic methods (1)
- Probe diagnostics (1)
- Probenvorbereitung (1)
- Process Industry (1)
- Process industry (1)
- Process intelligence (1)
- Prodrug antibiotic (1)
- Proficiency Testing (1)
- Programmed cell death (1)
- Protection (1)
- Protein G (1)
- Protein Purification (1)
- Protein Tyrosine Phosphatases (1)
- Protein analysis (1)
- Protein content (1)
- Protein hydrolysis (1)
- Protein imaging (1)
- Protein nitration (1)
- Protein oligomerization (1)
- Protein quantification (1)
- Protein structure (1)
- Protein test (1)
- Protein-induced fluorescence enhancement (1)
- Proteins (1)
- Protein–DNA filament (1)
- Protemics (1)
- Proteoglycans (1)
- Proteome (1)
- Protocol (1)
- Provenance (1)
- Provenance information (1)
- Provenancing (1)
- Proximity-enhanced reaction (1)
- Pseudo-Voigt fit function (1)
- Pt(111) (1)
- Pt(II) (1)
- Pt-based drugs (1)
- PtNP (1)
- Public funding (1)
- Puls-echo method (1)
- Pulse compression (1)
- Pulse energy (1)
- Pulse thermography (1)
- Pulse-echo method (1)
- Pulsed-GD-SFMS (1)
- Pulverization (1)
- Purine P2Y1 receptors (1)
- Pyrethroid (1)
- Python (1)
- QC (1)
- QI-FoKuS (1)
- QNMR (1)
- QUASES (1)
- Qantum yield (1)
- QuEChERS (1)
- Qualitative measurements (1)
- Quality Assurance (1)
- Quality assurancemechanism (1)
- Quantitative Analysis (1)
- Quantitative XPS (1)
- Quantitative bioimaging (1)
- Quantitative determination (1)
- Quantitative moisture measurement (1)
- Quantitative surface chemical analysis (1)
- Quantum Yield (1)
- Quantum chemistry (1)
- Quantum do (1)
- Quantum rod (1)
- Quantum state (1)
- Quartzite rock (1)
- Quencher (1)
- Quick-XAS (1)
- RBD (1)
- RBE (1)
- RDF (1)
- REDOR (1)
- REMPI (1)
- REPT-HMQC (1)
- RF ICP discharge (1)
- RFID based sensors (1)
- RNA (1)
- ROPPOC (1)
- RSSI Received Signal Strength Indicator (1)
- RXES (1)
- Radiated wavefield (1)
- Radiation (1)
- Radiation protection (1)
- Radiation shielding (1)
- Radical Scavenge (1)
- Radicals (1)
- Radioactive waste disposal (1)
- Radiogenic isotopes (1)
- Radiology (1)
- Radiometabolites (1)
- Radiosensitization (1)
- Radiotherapy (1)
- Radon reconstruction (1)
- Radon transform (1)
- Radon transformation (1)
- Raman Spectroscopy (1)
- Raman band width determination (1)
- Raman microscopy (1)
- Raman spectra (1)
- Raman-spectroscopy (1)
- Rapid Analysis (1)
- Rapid procedure for binder extraction (1)
- Rare earth elements separations (1)
- Rare-Earth elements (Tm3+) (1)
- Rat (1)
- Rat/human liver microsomes (1)
- Ratiometric fluorescence (1)
- Rational design (1)
- Re-entrant surface feature (1)
- Reaction Monitoring (1)
- Reaction dynamics (1)
- Reactor control (1)
- Readiness for laying (1)
- Real-time imaging (1)
- Real-time quality control (1)
- Reallabor (1)
- Reassessment (1)
- Rebound hammer (1)
- Reclaimed asphalt (1)
- Recombinant Antibody (1)
- Recombinant antibody (1)
- Recombinant protein (1)
- Reconstructed ion chromatograms (1)
- Reconstruction algorithms (1)
- Record luminescence quantum yield (1)
- Recovery (1)
- Recovery experiments (1)
- Redox reactions (1)
- Redox switch (1)
- Reduction of MoF6 (1)
- Reduction of volatile chlorides and fluorides by hydrogen (1)
- Reference Material (1)
- Reference Materials (1)
- Reference isotherm (1)
- Reference measurements (1)
- Reference product (1)
- Reference specimen (1)
- Reference spectra (1)
- References (1)
- Reflection spectroscopy (1)
- Refraction (1)
- Refracto-vibrometry (1)
- Refractory alloys (1)
- Region of interest (1)
- Regulation (1)
- Regulatory identification of nanomaterials (1)
- Relaxation times (1)
- Release (1)
- Reliability assessment (1)
- Rembrandt (1)
- Remediation (1)
- Renal disease (1)
- Renewable Energy (1)
- Renewable copolymers (1)
- Renewable energy (1)
- Repelling surface coatings (1)
- Replication (1)
- Replication crisis (1)
- Representative morphology modeling (1)
- Reproducibility crisis (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Research Software (1)
- Research agenda (1)
- Residual Stress (1)
- Resilience (1)
- Resolution (1)
- Resolution criterion (1)
- Resonance wavelength shift (1)
- Resource-based-view (1)
- Reusable (1)
- Reverse Monte Carlo (RMC) (1)
- Reverse paintings on glass (1)
- Reverse time migration (1)
- Reversible covalent hydrazine chemistry (RCHC) (1)
- Review (1)
- Revision of the SI (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhodonia placenta (1)
- Rigid amorphous fraction (1)
- Ring resonator (1)
- Ring-expansion polymerization (1)
- Ring-opening Polymerisation (1)
- Ringversuch (1)
- Risk assessment (1)
- River (1)
- River water (1)
- River water sulfate (1)
- Robocasting (1)
- Robust nano objects (1)
- Robustness (1)
- Rock wool (1)
- Rosamine (1)
- Roughness analysis (1)
- Round Robin (1)
- Round robin (1)
- Round robin exercise (1)
- Rround robin test (1)
- Ruthenium(II) complexes (1)
- SAFT (1)
- SANS (1)
- SARS-CoV 2 (1)
- SARS-CoV2 inhibitor (1)
- SBA-16 (1)
- SBP (1)
- SC-ICP-MS (1)
- SDHI-fungicide (1)
- SEC (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEM/EDX (1)
- SI Traceability (1)
- SI-traceability (1)
- SIDA-LC-MS/MS (1)
- SIMS (1)
- SOM-SM (1)
- SPM (1)
- SPR (1)
- STXM (1)
- SVOC (1)
- SWIR photoluminescence (1)
- SWIR thermography (1)
- SYBR Gold (1)
- SYBR gold (1)
- SZ2080 negative photo-resist (1)
- Safe-by-design (1)
- Safety characteristics (1)
- Salicylic acid (1)
- Salinomycin (1)
- Salt (1)
- Salts (1)
- Sample holder (1)
- Sample treatment (1)
- Sample-sample bracketing (1)
- Sampling (1)
- Sampling techniques (1)
- Sandstone (1)
- Sandstones (1)
- Santa-marta (1)
- Sapphire (1)
- Saturation (1)
- Scale anchor (1)
- Scale conversion (1)
- Scaled Boundary Finite Element Method (1)
- Scandium (1)
- Scanning laser Doppler vibrometry (1)
- Scanning micro-X-ray fluorescence (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scattered radiation (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schlieren Imaging (1)
- Scientific publication (1)
- Scintillator (1)
- Screed (1)
- Screening method (1)
- Scribal corrections (1)
- Seawater (1)
- Secondary Ion Mass Spectrometry (1)
- Secondary alcohols (1)
- Secondary fluorescence correction (1)
- Sediment (1)
- Sedimentation box (SB) (1)
- Segmentations (1)
- Seismic (1)
- Seismic signal reconstruction (1)
- Selected area XPS (1)
- Selective Laser Melting (SLM) (1)
- Selective laser melting (1)
- Selective oxidation (1)
- Selenium (1)
- Self-absorption (1)
- Self-absorption coefficient (1)
- Self-degrading (1)
- Self-healing (1)
- Self-lubricating coating (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Semi-transparent composite (1)
- Semiconductor nanocrystals (1)
- Semitransparency (1)
- Sensitivity (1)
- Sensitizers (1)
- Sensor network (1)
- Sensors Placement (1)
- Separability assumption (1)
- Separability condition (1)
- Separation (1)
- Sequence dependence (1)
- Sequencing (1)
- Sequencing algorithm (1)
- Sequential spectroscopic data (1)
- Serra da cangalha (1)
- Sers (1)
- Serum (1)
- Sewage sludge ash (1)
- Sewage treatment plant (1)
- Shaker (1)
- Shape memory alloy (1)
- Shape-controlled nanoparticles (1)
- Shape-engineered (1)
- Shear load (1)
- Shrinkage (1)
- SiGe (1)
- SiO2 Nanoparticle (1)
- Siderite (1)
- Signal Features (1)
- Signal features (1)
- Silbernanopartikel (1)
- Silica and polystyrene nanoparticles (1)
- Silica diagenesis (1)
- Silicon carbide (1)
- Silicon chlorides (1)
- Silicon halides (1)
- Silicon tetrafluoride (1)
- Silver (1)
- Simvastatine (1)
- Single Cell (1)
- Single cell (1)
- Single cell analysis (1)
- Single cell-ICP-MS (1)
- Single crystal (1)
- Single particle spectroscopy (1)
- Single-cell analysis (1)
- Single-sided NMR (1)
- Single-source precursors (1)
- Single-stranded DNA-binding protein (1)
- Singlet oxygen (1)
- Singular stress (1)
- Singulettsauerstoff (1)
- Sintered Material (1)
- Sintering (1)
- Skeletal classification (1)
- Skin tissue spectroscopy (1)
- Slags (1)
- Slicers (1)
- Small-angle X-ray Scattering (1)
- Small-area XPS (1)
- Smart Sensors (1)
- Smart manufacturing (1)
- Smart sensors (1)
- Smart test laboratories (1)
- Smartphone readout device (1)
- Society of hair testing (1)
- Socio-ecological models (1)
- Soda-lime glass (1)
- Soft X-ray (1)
- Soft-templated mesoporous films (1)
- Software Infrastructure (1)
- Software Licensing (1)
- Software Training (1)
- Soil available boron (1)
- Soils (1)
- Sol-gel (1)
- Sol-gel processes (1)
- Sol-gel synthesis (1)
- Solar Cell (1)
- Solar cell (1)
- Solarpur (1)
- Solid (1)
- Solid phase extraction (SPE) (1)
- Solid-binding Peptides (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (1)
- Solid-state fluorescence (1)
- Solvent-free (1)
- Solvents (1)
- Sonic crystal (1)
- Sonic stress wave (1)
- Sonochemical synthesis (1)
- Sorghum (1)
- Sorption isotherm (1)
- Spark plasma sintering (1)
- Spatial Heterodyne Spectrometry (1)
- Spatial analyses (1)
- Special issue (1)
- Special issue, young analytical scientists (1)
- Speciation analysis (1)
- Species-unspecific on-line isotope dilution (1)
- Specific Adsorption of N-2 and Kr (1)
- Specific probe (1)
- Specific surface area (1)
- Specimen (1)
- Spectoscopic imaging (1)
- Spectral enhancement (1)
- Spectral overlap (1)
- Spectrometer (1)
- Spectrometry (1)
- Spectroscopic imaging (1)
- Spectroscopy / Instrumentation (1)
- Spectroscopy / Theory (1)
- Speroid (1)
- Spheroid (1)
- Spike protein (1)
- Spinel (1)
- Splitting (1)
- Spontaneous emulsification (1)
- Spot-welded joints (1)
- Sputtering (1)
- Sr and Nd isotope analysis (1)
- Sr isotope analysis (1)
- SsNMR (1)
- Stable isotopes (1)
- Stakeholders (1)
- Standard atomic weight (1)
- Standardization research (1)
- Stannosilicates (1)
- Static Mixing (1)
- Static headspace (1)
- Statistical analysis (1)
- Statistics (1)
- Steel (1)
- Steel fiber reinforced concrete (1)
- Steel fiber reiniforced concrete (1)
- Stereoscopy (1)
- Stimulated Raman Spectroscopy (1)
- Stochastic modeling (1)
- Straight edge method (1)
- Strain hardening (1)
- Strain identification (1)
- Strand break (1)
- Stranski–Krastanow growth (1)
- Stratagem (1)
- Strength (1)
- Streptavidin binding (1)
- Stress intensity factors (1)
- Stress relief cracking (1)
- Stress strain relations (1)
- Stress-strain behaviour (1)
- Strontium isotope (1)
- Strontium titanate (1)
- Structural Analysis (1)
- Structural Biology (1)
- Structural anomalies (1)
- Structural control (1)
- Structural inhomogenities (1)
- Structural science (1)
- Structure activity relationships (1)
- Structure analysis (1)
- Structure factors (1)
- Structure-property relationship (1)
- Structured heating (1)
- Structured light scanning (SLS) (1)
- Structures under extreme conditions (1)
- Struvite (1)
- Submerged arc welding (1)
- Subsurface defects (1)
- Sulfated materials (1)
- Sulfur isotopes (1)
- Sulphur isotope (1)
- Sum Parameter (1)
- Sum Parameter Method (1)
- Sum parameter (1)
- Sum parameter method (1)
- Sunscreen (1)
- Super Resolution (1)
- Super martensitic stainless steel (1)
- Super resolution (SR) (1)
- Super-resolution imaging (1)
- Supplementary cementitous materials (1)
- Supplementary comparison (1)
- Supported catalyst (1)
- Surface Activation (1)
- Surface Analysis Working Group (1)
- Surface Chemistry (1)
- Surface area (1)
- Surface charge (1)
- Surface chemisttry (1)
- Surface cracks (1)
- Surface enhanced Raman scattering (1)
- Surface group analysis (1)
- Surface ligand (1)
- Surface migration barriers (1)
- Surface modification (1)
- Surface molecular patterning (1)
- Surface properties (1)
- Surface regeneration (1)
- Surface relaxivities (1)
- Surface relaxivity (1)
- Surface roughness analysis (1)
- Surface species (1)
- Surface waters (1)
- Surface-enhanced Raman scattering (1)
- Surface-enhanced Raman scattering (SERS) (1)
- Surface-initated grafting (1)
- Surfaces, Coatings and Films (1)
- Surrogate citations (1)
- Survey (1)
- Suspended organic matter (1)
- Suspended particulate matter (SPM) (1)
- Suspension growth (1)
- Sustainability and the Environment (1)
- Sustainable Food Safety (1)
- Sustainable Production (1)
- Sustainable Software Development (1)
- Sustainable Synthesis (1)
- Suzuki coupling (1)
- Suzuki-Miyaura coupling (1)
- Swirl (1)
- Switch (1)
- Symbolic computation (1)
- Synchroton x-ray diffraction (1)
- Synchrotron FTIR (1)
- Synchrotron Radiation (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron X-ray refraction (1)
- Synchrotron XPS (1)
- Synthetic organic pigments (1)
- System method (1)
- T-SEM (1)
- TD-GC-MS (1)
- TED-GC-MS (1)
- TGA-MS (1)
- THP(B) (1)
- TIG welding (1)
- TIG-welding (1)
- TRIS (1)
- TRISO (1)
- TTA-UC (1)
- TTBP-TAZ (1)
- TXRF (1)
- TXRF-XAS (1)
- Tafel Plot (1)
- Talbot-Lau interferometer (1)
- Tandem-MS (1)
- Tanks (1)
- Tantalum oxyfluorides (1)
- Target (1)
- Targeted mass spectrometry (1)
- Tattoo inks (1)
- Tau (1)
- Technical lignin (1)
- Telomere (1)
- Temperature-dependent neutron transmission (1)
- Tensile load (1)
- Terephthalic acid (1)
- Termites (1)
- Ternary quantum dots (1)
- Terrorism (1)
- Tesserae (1)
- Test material (1)
- Test strips (1)
- Testumgebung (1)
- Tetracene (1)
- Tetracyclin (1)
- Tetramethylammonium hydroxide (1)
- Thawing (1)
- The MOUSE (1)
- Theranostics (1)
- Therapeutic Antibodies (1)
- Therapeutic Drug Monitoring (1)
- Thermal analysis (1)
- Thermal annealing (1)
- Thermal conductivity (1)
- Thermal conductivity device (1)
- Thermal coupling energy level (1)
- Thermal decomposition (1)
- Thermal degradation (1)
- Thermal desorption analysis (1)
- Thermal extraction desorption-gas chromatography/mass spectrometry (TED-GC/MS), monitoring (1)
- Thermal extraction-desorption gas chromatography mass spectrometry (1)
- Thermal model (1)
- Thermal testing (1)
- Thermally coupled levels (1)
- Thermo-desorption (1)
- Thermo-mechanical loading (1)
- Thermoacoustic emitter (1)
- Thermoanalytik (1)
- Thermodynamic (1)
- Thermodynamic analysis (1)
- Thermography Computed (1)
- Thermoplastic (1)
- Thermoresponsive poly(glycidyl ether) coatings (1)
- Thickness measurement (1)
- Thickness measurements (1)
- Thickness resonance (1)
- Thin film analysis (1)
- Thin film characterization (1)
- Thin mesoporous films (1)
- Thin tissue sections (1)
- Thiols (1)
- Thiourea-formaldehyde (1)
- Three-dimensional measurement (1)
- Thumor therapy (1)
- Tilting (1)
- Timber structure (1)
- Time of flight (1)
- Time-gated emission (1)
- Time-lapse X-ray computed tomography (1)
- Time-of-flight measurements (1)
- Time-of-flight secondary ion mass spectrometry (1)
- Tire Wear (1)
- Tire particles (1)
- Tissue soldering (1)
- Titania (1)
- Titania nanoparticles (1)
- Titanium dioxide (1)
- Titanium hydride (1)
- Tomography of wood samples (1)
- Topas (1)
- TopasMC (1)
- Topical collection: Analytical Methods and Applications in the Materials and Life Sciences (1)
- Topotactic phase transitions (1)
- Torah (1)
- Torah scrolls (1)
- Total Quality Management (1)
- Total cyanide (1)
- Total element content (1)
- Total element determination (1)
- Total transmittance reflectance (1)
- Toxic elements (1)
- Toxic metals (1)
- Toxicity (1)
- Toxicity testing (1)
- Toxikologie (1)
- Toys (1)
- Trace Analysis (1)
- Trace humdity measurement (1)
- Transducers (1)
- Transesterification (1)
- Transferrin (1)
- Transformation pathways (1)
- Transformationsprodukte (1)
- Transient absorbtion spectroscopy (1)
- Transient signal (1)
- Transition metals (1)
- Transition-metal doped (1)
- Transmission Kikuchi Diffraction (TKD) (1)
- Transmission electron microsocpy (1)
- Trends in extreme events (1)
- Triazine (1)
- Tribologie (1)
- Triggered (1)
- Triple UNet (1)
- Triply periodic minimal surface structures (1)
- Triply periodic minimal surfaces (1)
- Trojan silver artefacts (1)
- Truffle (1)
- Truffle Aroma (1)
- Trust (1)
- Tryptic digest (1)
- Tryptophan (1)
- Tuber melanosporum (1)
- Tungsten (1)
- Twin-screw extrusion (TSE) (1)
- Twinning (1)
- Two-dimensional hexagonal boron nitride(h-BN) (1)
- Two-dimensional off-line coupling (1)
- Two-phase system (1)
- Type-I pyrethroids (1)
- UHPLC-MS/MS (1)
- UPLC (1)
- USAXS (1)
- UV Bestrahlung (1)
- UV absorption (1)
- UV photons (1)
- UV protection (1)
- UV-A (1)
- UV-B (1)
- UV-C (1)
- UV-Vis (1)
- UV/VIS (1)
- UV/VIS spectroscopy (1)
- UV/vis spectroscopy (1)
- UV–Vis spectroscopy (1)
- Ultra sound (1)
- Ultra thin polymer films (1)
- Ultra-high performance concrete (1)
- Ultrahigh-performance concrete (UHPC) (1)
- Ultrasensitive (1)
- Ultrasonic (1)
- Ultrasonic Guided Waves (1)
- Ultrasonic Levitation (1)
- Ultrasonic Nebulization (1)
- Ultrasonic Testing (1)
- Ultrasonic acoustic resonator (1)
- Ultrasonic echo (1)
- Ultrasonic levitation (1)
- Ultrasonic probe (1)
- Ultrasonic tomography (1)
- Ultrasonic transducer (1)
- Ultrasonic transducers (1)
- Ultrasonics (1)
- Uncertainty estimation (1)
- Upconversion luminescence (1)
- Upconverting nanoparticles (1)
- Upscaling (1)
- Urban (1)
- Urine (1)
- VCSEL array (1)
- VMAAS (1)
- VO (1)
- VOC emission (1)
- Vacuum ionization (1)
- Vacuum ultraviolet (VUV) light (1)
- Validation studies (1)
- Validation trial (1)
- Validierung (1)
- Vanadium (1)
- Vanadium oxide catalysts (1)
- Vanadium redox flow battery (1)
- Vanadium speciation (1)
- Variable excitation (1)
- Variational Calculation (1)
- Vegetable edible oil (1)
- Veterinary drugs (1)
- Vibration (1)
- Vibrational spectroscopy (1)
- Virtual CT (1)
- Virtual wave (1)
- Virtual wave concept (1)
- Virtual waves (1)
- Virucidality (1)
- Virus (1)
- Virus detection (1)
- Virus diagnostics (1)
- Visible light (1)
- Visible/near-infrared spectroscopy (1)
- Visual inspection (1)
- Vitriolic iron-gall inks (1)
- Vocabulary providers (1)
- Volatile marker (1)
- Volatile organic compounds; (1)
- Volatiles (1)
- Volumetric uptake (1)
- Vorticity noise (1)
- Voxel size (1)
- WAXS (1)
- WWTP (1)
- Wasser (1)
- Wastewater treatment (1)
- Water adsorption (1)
- Water analysis (1)
- Water dispersibility (1)
- Water electrolysis (1)
- Water filtration (1)
- Water management (1)
- Water permeability (1)
- Water splitting (1)
- Water stable isotope analysis (1)
- Water transport (1)
- Wavelet transformation (1)
- Web mining (1)
- White light interference microscopy (1)
- Whole water samples (1)
- Wide angle reflection and refraction (1)
- Wide-Angle Soft X‑ray Scattering (1)
- Wide-range (1)
- Wind energy (1)
- Wind turbine (1)
- Wire are additive manufacturing (1)
- Wood materials (1)
- Wood protection (1)
- Work function (1)
- Writing materials (1)
- X-Ray Fluorescence (1)
- X-Ray Refraction (1)
- X-Ray analysis (1)
- X-ray Absorption Spectroscopy (1)
- X-ray Computed Tomography (CT) (1)
- X-ray DIFFRACTION (1)
- X-ray Fluorescence (1)
- X-ray absorption Fine Spectroscopy (1)
- X-ray absorption fine structure (1)
- X-ray absorption near-edge structure (1)
- X-ray adsorption near-edge structure (XANES) spectroscopy (1)
- X-ray caustics (1)
- X-ray computed tomography (CT) (1)
- X-ray computed tomography (XCT) (1)
- X-ray dark-field radiography (1)
- X-ray diffraction (XRD) (1)
- X-ray fluorescence (XRF) (1)
- X-ray fluorescence imaging (1)
- X-ray fuorescence (1)
- X-ray magnetic circular dichroism (XMCD), (1)
- X-ray micro-computed tomography (1)
- X-ray microtomography (1)
- X-ray optics (1)
- X-ray production efficiency (1)
- X-ray reflectivity (1)
- X-ray spectrometer (1)
- X-ray tomographic (1)
- XAFS (1)
- XCT Data Conditioning (1)
- XRCD method (1)
- XRF imaging (1)
- Xerogel (1)
- Yb(III) (1)
- Yerba mate tea (1)
- Yield stress (1)
- Young´s modulus (1)
- Ytterbium (1)
- Yttrium silicates (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zebrafisch (1)
- Zenodo (1)
- Zeolite (1)
- Zeolites (1)
- Zeolithe (1)
- Zeolitic Imidazolate Frameworks (1)
- Zero Massflow Liner (1)
- Zerstörungsfreie Prüfung (1)
- Zeta potential (1)
- Zinc (1)
- Zinc analysis (1)
- Zinc phosphate (1)
- Zirconia (1)
- Zn (1)
- Zwitterion (1)
- Zyklisierung (1)
- a-zearalenol (1)
- aRTist (1)
- abasic side (1)
- analytical service (1)
- base loss (1)
- battery aging mechanism (1)
- bell pepper (1)
- boron (1)
- calibration (1)
- composites (1)
- confocal (1)
- current collector corrosion (1)
- dXCT (1)
- delta value (1)
- depth profiles (1)
- dipolar polarization (1)
- dsDNA (1)
- fertilizer (1)
- i-TRIBOMAT (1)
- i.S.Sy.Da.T.A. (1)
- ion optics (1)
- isotope fractionation (1)
- lN2 (1)
- lank characterization (1)
- layered system (1)
- magnetic nanocatalysts (1)
- materials informatics (1)
- measurement uncertainty (1)
- metabolism (1)
- microspectroscopy (1)
- microstructural changes (1)
- nm films (1)
- openBIS (1)
- p-Aminothiophenol (1)
- p-Nitrothiophenol (1)
- p-aminothiophenol (1)
- p-nitrothiophenol (1)
- pH probe (1)
- pH sensor (1)
- pL-droplets (1)
- pUC19 (1)
- permittivity (1)
- ph (1)
- silicon (1)
- soil (1)
- spICP-MS (1)
- space charge polarization (1)
- species-specific isotope information (1)
- subgrain structure (1)
- tandard addition (1)
- temperature (1)
- thin film analysis (1)
- transmission mode (1)
- wrapping (1)
- x-ray diffraction (1)
- Ägyptisches Museum Berlin (1)
- Δμ XANES (1)
- β-lactam (1)
Organisationseinheit der BAM
- 1 Analytische Chemie; Referenzmaterialien (490)
- 6 Materialchemie (393)
- 8 Zerstörungsfreie Prüfung (242)
- 6.3 Strukturanalytik (170)
- 6.1 Oberflächen- und Dünnschichtanalyse (137)
- 1.1 Anorganische Spurenanalytik (117)
- 1.2 Biophotonik (103)
- 1.7 Organische Spuren- und Lebensmittelanalytik (77)
- 8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen (70)
- 8.0 Abteilungsleitung und andere (66)
Paper des Monats
- ja (26)
Monitoring specific chemical properties is the key to chemical process control. Today, mainly optical online methods are applied, which require time- and cost-intensive calibration effort. NMR spectroscopy, with its advantage being a direct comparison method without need for calibration, has a high potential for closed-loop process control while exhibiting short set-up times. Compact NMR instruments make NMR spectroscopy accessible in industrial and rough environments for process monitoring and advanced process control strategies.
We present a fully automated data analysis approach which is completely based on physically motivated spectral models as first principles information (Indirect Hard Modelling – IHM) and applied it to a given pharmaceutical lithiation reaction in the framework of the European Union’s Horizon 2020 project CONSENS. Online low-field NMR (LF NMR) data was analysed by IHM with low calibration effort, compared to a multivariate PLS-R (Partial Least Squares Regression) approach, and both validated using online high-field NMR (HF NMR) spectroscopy.
Many applications of nanometer- and micrometer-sized particles include their surface functionalization with linkers, sensor molecules, and analyte recognition moieties like (bio)ligands. This requires knowledge of the chemical nature and number of surface groups accessible for subsequent coupling reactions. Particularly attractive for the quantification of these groups are spectrophotometric and fluorometric assays, which can be read out with simple instrumentation. In this respect, we present here a novel Family of cleavable spectrophotometric and multimodal reporters for conjugatable amino and carboxyl surface groups on nano- and microparticles. This allows determination of particle-bound labels, unbound reporters in the supernatant, and reporters cleaved off from the particle surface, as well as the remaining thiol groups on particle, by spectrophotometry and inductively coupled optical emission spectrometry (32S ICP-OES). Comparison of the performance of these cleavable reporters with conductometry and conventional labels, utilizing changes in intensity or Color of absorption or emission, underlines the analytical potential of this versatile concept which elegantly circumvents Signal distortions by scattering and Encoding dyes and enables straightforward validation by method comparison.
Cost-effective water cleaning approaches using improved Treatment technologies, for instance based on catalytic processes with high activity catalysts, are urgently needed. The aim of our study was to synthesize efficient Fenton-like photo-catalysts for rapid degradation of persistent organic micropollutants in aqueous medium. Iron-based nanomaterials were chemically synthesized through simple procedures by immobilization of either iron(II) oxalate (FeO) or iron(III) citrate (FeC) on magnetite (M) nanoparticles stabilized with polyethylene glycol (PEG). Various investigation techniques were performed in order to characterize the freshly prepared catalysts. By applying advanced oxidation processes, the effect of catalyst dosage, hydrogen peroxide concentration and UV-A light exposure were examined for Bisphenol A (BPA) conversion, at laboratory scale, in mild conditions. The obtained results revealed that BPA degradation was rapidly enhanced in the presence of low-concentration H2O2, as well as under UV-A light, and is highly dependent on the surface characteristics of the catalyst. Complete photo-degradation of BPA was achieved over the M/PEG/FeO catalyst in less than 15 minutes. Based on the catalytic performance, a hierarchy of the tested catalysts was established: M/PEG/FeO > M/PEG/FeC > M/PEG. The results of cytotoxicity assay using MCF-7 cells indicated that the aqueous samples after treatment are less cytotoxic.
Insights into early damage mechanisms during high-temperature gas corrosion provide important aspects for the prediction of the long-term stability of hightemperature materials exposed to a hot and corrosive environment. The current work presents a real time study concerning the combined oxidation and sulfidation of ferritic model alloys in a hot SO2 containing atmosphere using energy dispersive X-ray diffraction. The applied high temperature reactor allows the transmittance of high energetic X-rays in order to collect X-ray diffraction pattern of the sample surface in situ during the reaction with the reactive environment. The results revealed that the first phases crystallizing on iron with 2 wt% chromium and with 9 wt% chromium are oxides. The aging experiments at T = 650° C with 0.5% SO2 and 99.5% Ar were followed in situ and caused an external mixed oxide-sulfide layer on top of iron with 2 wt% chromium. On the higher alloyed material the external scale consists of iron oxides and the inner scale of mixed (Fe,Cr)-oxides and chromium-sulfides. The oxide content continuously increases parallel to an increase of the sulfide amount. Thus, the initially formed (Fe,Cr)-oxides do not have a protective character and support the transport of sulfur through the growing oxide scale.
Equipping ZIF particles with a polyelectrolyte membrane provides functional groups at their interface, enabling further conjugations necessary for applications such as targeted drug delivery. Previous approaches to coat ZIF particles with polyelectrolytes led to surface corrosion of the template material. This work overcomes previous limitations by performing a Layer-by-Layer (LbL) polyelectrolyte coating onto ZIF-8 and ZIF-67 particles in nonaqueous environment. Using the 2-methylimidazolium salt of polystyrensulfonic acid instead of the acid itself and polyethyleneimine in methanol led to intact ZIF particles after polyelectrolyte coating. This was verified by electron microscopy. Further, zetapotential and atomic force microscopy measurements confirmed a continuous polyelectrolyte multilayer built up. The here reported adaption to the well-studied (LbL) polyelectrolyte selfassembly process provides a facile method to equip ZIF particles with a nanometer thin polyelectrolyte multilayer membrane.
Wood treated with nano metal fluorides is found to resist fungal decay. Sol−gel synthesis was used to synthesize MgF2 and CaF2 nanoparticles. Electron microscopy images confirmed the localization of MgF2 and CaF2 nanoparticles in wood. Efficacy of nano metal fluoride-treated wood was tested against brown-rot fungi Coniophora puteana and Rhodonia placenta. Untreated wood specimens had higher
mass losses (∼30%) compared to treated specimens, which had average mass loss of 2% against C. puteana and 14% against R. placenta, respectively. Nano metal fluorides provide a viable alternative to current wood preservatives.
2-Amino-2-(hydroxymethyl)-1,3-propanediol (TRIS) and ethylene-diaminetetraacetic acid (EDTA) are key components of biological buffers and are frequently used as DNA stabilizers in irradiation studies. Such surface or liquid phase studies are done with the aim to understand the fundamental mechanisms of DNA radiation damage and to improve cancer radiotherapy. When ionizing radiation is used, abundant secondary electrons are formed during the irradiation process, which are able to attach to the molecular compounds present on the surface. In the present study we experimentally investigate low energy electron attachment to TRIS and methyliminodiacetic acid (MIDA), an analogue of EDTA, supported by quantum chemical calculations. The most prominent dissociation channel for TRIS is through hydroperoxyl radical formation, whereas the dissociation of MIDA results in the formation of formic and acetic acid. These compounds are well-known to cause DNA modifications, like strand breaks. The present results indicate that buffer compounds may not have an exclusive protecting effect on DNA as suggested previously.
"INFRASTAR aims to develop knowledge, expertise and skills for optimal and reliable management of structures. The generic methodology is applied to bridges and wind turbines in relation to fatigue offering the opportunity to deal with complementary notions (such as old and new asset management, unique and similar structures, wind and traffic actions) while addressing 3 major challenges: 1/ advanced modelling of concrete fatigue behaviour, 2/new non destructive testing methods for early aged damage detection and 3/probabilistic approach of structure reliability under fatigue. Benefit of cross-experience and inter-disciplinary synergies creates new knowledge. INFRASTAR proposes innovative solutions for civil infrastructure asset management so that young scientists acquire a high employment profile in close dialogue between industry and academic partners. Modern engineering methods, including probabilistic approaches, risk and reliability assessment tools, will take into account the effective structural behaviour of existing bridges and wind turbines by exploiting monitored data. Existing methods and current state-of -the art is based on excessive conservatism which produces high costs and hinders sustainability. INFRASTAR improves knowledge for optimising the design of new structures, for more realistic verification of structural safety and more accurate prediction of future lifetime of the existing structures. That is a challenge for a sustainable development because it reduces building material and energy consumption as well as CO2 production. Within the global framework of optimal infrastructure asset management, INFRASTAR will result in a multi-disciplinary body of knowledge covering generic problems from the design stage process of the new civil infrastructures up to recycling after dismantlement. This approach and the proposed methods and tools are new and allow a step forward for innovative and effective process."
During cancer radiation therapy high‐energy radiation is used to reduce tumour tissue. The irradiation produces a shower of secondary low‐energy (<20 eV) electrons, which are able to damage DNA very efficiently by dissociative electron attachment. Recently, it was suggested that low‐energy electron‐induced DNA strand breaks strongly depend on the specific DNA sequence with a high sensitivity of G‐rich sequences. Here, we use DNA origami platforms to expose G‐rich telomere sequences to low‐energy (8.8 eV) electrons to determine absolute cross sections for strand breakage and to study the influence of sequence modifications and topology of telomeric DNA on the strand breakage. We find that the telomeric DNA 5′‐(TTA GGG)2 is more sensitive to low‐energy electrons than an intermixed sequence 5′‐(TGT GTG A)2 confirming the unique electronic properties resulting from G‐stacking. With increasing length of the oligonucleotide (i.e., going from 5′‐(GGG ATT)2 to 5′‐(GGG ATT)4), both the variety of topology and the electron‐induced strand break cross sections increase. Addition of K+ ions decreases the strand break cross section for all sequences that are able to fold G‐quadruplexes or G‐intermediates, whereas the strand break cross section for the intermixed sequence remains unchanged. These results indicate that telomeric DNA is rather sensitive towards low‐energy electron‐induced strand breakage suggesting significant telomere shortening that can also occur during cancer radiation therapy.
New Ca- and Sr-based coordination polymers (CPs) were mechanochemically synthesized by milling metal hydroxide samples (M = Ca, Sr) with tetrafluorophthalic acid (H2oBDC-F4) and isophthalic acid (H2mBDC). [Ca(oBDC-F4)(H2O)2] (1) exhibits a small surface area which is slightly increased after removing the crystal water. On the other hand, the hydrated sample of the nonfluorinated [Sr(mBDC)(H2O)3.4] (2) reveals a small BET surface area which remains unchanged even after the release of crystal water via thermal treatment. The new compounds 1 and 2 are similar to their Sr- and Ca-analogs, respectively. These findings are confirmed by thermal analysis, MAS NMR, and ATR-IR measurements, in addition to the Le Bail refinements for the measured powder X-ray data of 1 and 2. Ca- and Sr-CPs based on perfluorinated dicarboxylic systems and their nonfluorinated analogs diverse in structural and chemical properties depending on the geometries of the organic linkers and the presence of fluorine atoms. The fluorinations of organic ligands lead to the formation of fluorinated CPs with higher dimensionalities compared to their nonfluorinated counterparts. Conversely, the thermal stabilities of the latter are higher than those of the fluorinated CPs.
For assuring the safety and reliability of components and constructions in energy applications made of fiber-reinforced polymers (e.g., blades of wind turbines and tidal power plants, engine chassis, flexible oil and gas pipelines) innovative non-destructive testing methods are required. Within the European Project VITCEA complementary methods (shearography, microwave, ultrasonics and thermography) have been further developed and validated. Together with partners from the industry, test specimens have been constructed and selected on-site containing different artificial and natural defect artefacts. As base materials, carbon and glass fibers in different orientations and layering embedded in different matrix materials (epoxy, polyamide) have been considered. In this contribution, the validation of flash and lock-in thermography to these testing problems is presented. Data analysis is based on thermal contrasts and phase evaluation techniques. Experimental data are compared to analytical and numerical models. Among others, the influence of two different types of artificial defects (flat bottom holes and delaminations) with varying diameters and depths and of two different materials (CFRP and GFRP) with unidirectional and quasi-isotropic fiber alignment is discussed.
Morphology and structure of TixOy nanoparticles generated by femtosecond laser ablation in water
(2018)
In this work femto-second pulsed laser ablation in liquid (PLAL) procedure for the generation of titanium oxide nanoparticles (NP) is reported with the purpose of understanding morphology and structure of the newly generated NPs. Ablation duration was varied for optimization of NP generation processes between 10 and 90 min. Surface morphology of NPs as well as their size and shape (distribution) were analysed by various complementary electron microscopy techniques, i.e. SEM, TSEM and TEM. The crystalline structure of titanium oxide particles was investigated byXRD(two instruments operated in different geometries) and HR-TEM. Concentration of generated titanium oxide NPs in liquid was analysed by ICP-MS. A mix of crystalline (mainly anatase), partly crystalline and amorphous spherical titanium oxide NPs can be reported having a mean size between 10 and 20 nm, which is rather independent of the laser ablation (LA) duration. A second component consisting of irregularly shaped, but crystalline titanium oxide nanostructures is co-generated in the LA water, with more pronounced occurrence at longer LA times. The provenance of this component is assigned to those spherical particles generated in suspension and passing through the converging laser beam, being hence subject to secondary irradiation effects, e. g. fragmentation.
We designed micro-hollow cathode discharge prototypes under atmospheric pressure and investi-gated their acoustic characteristics. For the acoustic model of the discharge, we correlated the self-organisation effect of the current density distribution with the ideal model of an acoustic membrane. For validation of the obtained model, sound particle velocity spectroscopy was used to detect and analyse the acoustic emission experimentally. The results have shown a behaviour similar to the ideal acoustic membrane. Therefore, the acoustic excitation is decomposable into its eigenfrequencies and predictable. The model was unified utilising the gas exhaust velocity caused by the electrohydrodynamic force. The results may allow a contactless prediction of the current density distribution by measuring the acoustic emission or using the micro-discharge as a tunable acoustic source for specific applications as well.
An immunohistochemical method is described to visualize the distribution of metallothioneins 1/2 (MT 1/2) and metallothionein 3 (MT 3) in human ocular tissue. It is making use of (a) antibodies conjugated to gold nanoclusters (AuNCs) acting as labels, and (b) laser ablation (LA) coupled to inductively coupled plasma – mass spectrometry (ICP-MS). Water-soluble fluorescent AuNCs (with an average size of 2.7 nm) were synthesized and then conjugated to antibody by carbodiimide coupling. The surface of the modified AuNCs was then blocked with hydroxylamine to avoid nonspecific interactions with biological tissue. Immunoassays for MT 1/2 and MT 3 in ocular tissue sections (5 μm thick) from two post mortem human donors were performed. Imaging studies were then performed by fluorescence using confocal microscopy, and LA-ICP-MS was performed in the retina to measure the signal for gold. Signal amplification by the >500 gold atoms in each nanocluster allowed the antigens (MT 1/2 and MT 3) to be imaged by LA-ICP-MS using a laser spot size as small as 4 μm. The image patterns found in retina are in good agreement with those obtained by conventional fluorescence immunohistochemistry which was used as an established reference method.
The spectroscopic characterization by surface-enhanced Raman scattering (SERS) has shown great potential in studies of heterogeneous catalysis. We describe a plug-in multifunctional optofluidic platform that can be tailored to serve both as a variable catalyst material and for sensitive optical characterization of the respective reactions using SERS in microfluidic systems. The platform enables the characterization of reactions under a controlled gas atmosphere and does not present with limitations due to nanoparticle adsorption or memory effects. Spectra of the gold-catalyzed reduction of p-nitrothiophenol by sodium borohydride using the plug-in probe provide evidence that the borohydride is the direct source of hydrogen on the gold surface, and that a radical anion is formed as an intermediate. The in situ monitoring of the photoinduced dimerization of p-aminothiophenol indicates that the activation of oxygen is essential for the plasmon-catalyzed oxidation on gold nanoparticles and strongly supports the central role of metal oxide species.
In order to provide further evidence of damage mechanisms predicted by the recent solid-state transformation creep (SSTC) model, direct observation of damage accumulation during creep of Al–3.85Mg was made using synchrotron X-ray refraction. X-ray refraction techniques detect the internal specific surface (i.e. surface per unit volume) on a length scale comparable to the specimen size, but with microscopic sensitivity. A significant rise in the internal specific surface with increasing creep time was observed, providing evidence for the creation of a fine grain substructure, as predicted by the SSTC model. This substructure was also observed by scanning electron microscopy
Online immunocapture ICP‑MS for the determination of the metalloprotein ceruloplasmin in human serum
(2018)
The human copper-protein ceruloplasmin (Cp) is the major copper-containing protein in the human body. The accurate determination of Cp is mandatory for the reliable diagnosis of several diseases. However, the analysis of Cp has proven to be difficult. The aim of our work was a proof of concept for the determination of a metalloprotein-based on online immunocapture ICP-MS. The immuno-affinity step is responsible for the enrichment and isolation of the analyte from serum, whereas the compound-independent quantitation with ICP-MS delivers the sensitivity,
precision, and large dynamic range. Off-line ELISA (enzyme-linked immunosorbent assay) was used in parallel to confirm the elution profile of the analyte with a structure-selective method. The total protein elution was observed with the 32S mass trace. The ICP-MS signals were normalized on a 59Co signal. The human copper-protein Cp could be selectively determined. This was shown with pure Cp and with a sample of human serum. The good correlation with off-line ELISA shows that Cp could be captured and eluted selectively from the anti-Cp affinity column and subsequently determined by the copper signal of ICP-MS.
Thermoresponsive polymer coatings can facilitate cell sheet fabrication under mild conditions by promoting cell adhesion and proliferation at 37 1C. At lower temperatures the detachment of confluent cell sheets is triggered without enzymatic treatment. Thus, confluent cell sheets with intact extracellular matrix for regenerative medicine or tissue engineering applications become available. Herein, we applied the previously identified structural design parameters of functional, thermoresponsive poly(glycidyl ether) brushes on gold to the more application-relevant substrate glass via the self-assembly of a corresponding block copolymer (PGE-AA) with a short surface-reactive, amine-presenting anchor block. Both, physical and covalent immobilization on glass via either multivalent ionic interactions of the anchor block with bare glass or the coupling of the anchor block to a polydopamine (PDA) adhesion layer on glass resulted in stable coatings. Atomic force microscopy revealed a high degree of roughness of covalently attached coatings on the PDA adhesion layer, while physically attached coatings on bare glass were smooth and in the brush-like regime. Cell sheets of primary human dermal fibroblasts detached reliably (86%) and within 20 ± 10 min from physically tethered PGE-AA coatings on glass when prepared under cloud point grafting conditions. The presence of the laterally inhomogeneous PDA adhesion layer, however, hindered the spontaneous temperature-triggered cell detachment from covalently grafted PGE-AA, decreasing both detachment rate and reliability. Despite being only physically attached, self-assembled monolayer brushes of PGE-AA block copolymers on glass are functional and stable thermoresponsive coatings for application in cell sheet fabrication of human fibroblasts as determined by X-ray photoelectron spectroscopy.
In civil engineering concrete is the most used building material for making infrastructures like bridges and parking decks worldwide. It is as a porous and multiphase material made of aggregates with a defined grain size distribution, cement and water as well as different additives and admixtures depending on the application. Different grain sizes are important to ensure the needed density and compressive strength.
The resulting porous cement matrix contains a mixture of flour grains (aggregates with a grain size below 125 lm) and cement particles (particle size≈50lm). Harmful species like chlorides may penetrate together with water through the capillary pore space and may trigger different damage processes. The damage assessment of concrete structures in Germany is estimated due to the quantification of harmful elements regarding to the cement content only. In the evaluation of concrete using LIBS a two-dimensional scanning is necessary to consider the heterogeneity caused by the aggregates. Therefore, a LIBS system operating with a low energy NdCr:YAG laser, a pulse energy of 3 mJ, a wavelength of 1064 nm, a pulse width of 1.5 ns and a Repetition rate of 100 Hz has been used. Different Czerny-Turner spectrometers with CCD detectors in the UV and NIR range have been used for the detection. Large aggregates (macro-heterogeneity) can be excluded from the evaluation, whereas small aggregates in the range of the laser spot size (flour grains) cannot be spatially resolved. In this work the micro heterogeneity caused by flour grains and their impact on the quantification with LIBS will be discussed. To analyze the effect of changing grain sizes and ratios, the ablation behavior has been determined and compared. Samples with defined grain sizes were made and analyzed using LIBS.
The grain size distributions were analyzed with laser diffraction (LDA).
Understanding the mechanism of interactions of nanomaterials at biointerfaces is a crucial issue to develop new antimicrobial vectors. In this work, a series of water-soluble fullerene-polyglycerol sulfates (FPS) with different fullerene/polymer weight ratios and varying numbers of polyglycerol sulfate branches are synthesized, characterized, and their interactions with two distinct surfaces displaying proteins involved in target cell recognition are investigated. The combination of polyanionic branches with a solvent exposed variable hydrophobic core in FPS proves to be superior to analogs possessing only one of these features in preventing interaction of vesicular Stomatitis virus coat glycoprotein (VSV-G) with baby hamster kidney cells serving as a model of host cell. Interference with L-selectin-ligand binding is dominated by the negative charge, which is studied by two assays: a competitive surface plasmon resonance (SPR)-based inhibition assay and the leukocyte cell (NALM-6) rolling on ligands under flow conditions. Due to possible intrinsic hydrophobic and electrostatic effects of synthesized compounds, pico- to nanomolar half maximal inhibitory concentrations (IC50) are achieved. With their highly antiviral and anti-inflammatory properties, together with good biocompatibility, FPS are promising candidates for the future development towards biomedical applications.
During the last decades, X-ray (micro-)computed tomography has gained increasing attention for the description of porous skeletal and shell structures of various organism groups. However, their quantitative analysis is often hampered by the difficulty to discriminate cavities and pores within the object from the surrounding region. Herein, we test the ambient occlusion (AO) algorithm and newly implemented optimisations for the segmentation of cavities (implemented in the software Amira). The segmentation accuracy is evaluated as a function of (i) changes in the ray length input variable, and (ii) the usage of AO (scalar) field and other AO-derived (scalar) fields. The results clearly indicate that the AO field itself outperforms all other AO-derived fields in terms of segmentation accuracy and robustness against variations in the ray length input variable. The newly implemented optimisations improved the AO field-based segmentation only slightly, while the segmentations based on the AOderived fields improved considerably.
Additionally, we evaluated the potential of the AO field and AO-derived fields for the separation and classification of cavities as well as skeletal structures by comparing them with commonly used distance-map-based segmentations. For this, we tested the zooid separation within a bryozoan colony, the stereom classification of an ophiuroid tooth, the separation of bioerosion traces within a marble block and the calice (central cavity)-pore separation within a dendrophyllid coral. The obtained results clearly indicate that the ideal input field depends on the three-dimensional morphology of the object of interest. The segmentations based on the AO-derived fields often provided cavity separations and skeleton classifications that were superior to or impossible to obtain with commonly used distance-map-based segmentations. The combined usage of various AO-derived fields by supervised or unsupervised segmentation algorithms might provide a promising target for future research to further improve the results for this kind of high-end data segmentation and classification. Furthermore, the application of the developed segmentation algorithm is not restricted to X-ray (micro-)computed tomographic data but may potentially be useful for the segmentation of 3D volume data from other sources.
Hydrogen-assisted cracking is a critical combination of local microstructure, mechanical load and hydrogen concentration. Welded microstructures of low-alloyed creep-resistant Cr-Mo-V steels show different hydrogen trapping kinetics. This influences the adsorbed hydrogen concentration as well as the diffusion by moderate or strong trapping. A common approach to describe hydrogen traps is by their activation energy that is necessary to release hydrogen from the trap. In the present study, Cr-Mo-V steel T24 (7CrMoVTiB10-10) base material and TIG weld metal were investigated. Electrochemically hydrogen charged specimens
were analyzed by thermal desorption analysis (TDA) with different linear heating rates. The results show two different effects. At first, the microstructure effect on trapping is evident in terms of higher hydrogen concentrations in the weld metal and increased activation energy for hydrogen release. Secondly, it is necessary to monitor the real specimen temperature. A comparison between the adjusted heating rate and the real specimen temperature shows that the calculated activation energy varies by factor two. Thus, the trap character in case of the base material changes to irreversible at decreased temperature. Hence, the effect of the experimental procedure must be considered as well if evaluating TDA results. Finally, realistic temperature assessment is mandatory for calculation of activation energy via TDA.
Biotransformation processes of fluopyram (FLP), a new succinate dehydrogenase inhibitor (SDHI) fungicide, were investigated by electrochemistry (EC) coupled online to liquid chromatography (LC) and electrospray mass spectrometry (ESI-MS). Oxidative phase I metabolite production was achieved using an electrochemical flow-through cell equipped with a boron doped diamond (BDD) electrode. Structural elucidation and prediction of oxidative metabolism pathways were assured by retention time, isotopic patterns, fragmentation, and accurate mass measurements using EC/LC/MS, LC-MS/MS, and/or high resolution mass spectrometry (HRMS). The results obtained by EC were compared with conventional in vitro studies by incubating FLP with rat and human liver microsomes (RLM, HLM). Known phase I metabolites of FLP (benzamide, benzoic acid, 7-hydroxyl, 8-hydroxyl, 7,8-dihydroxyl FLP, lactam FLP, pyridyl acetic acid, and Z/E-olefin FLP) were successfully simulated by EC/LC/MS. New metabolites including an imide, hydroxyl lactam, and 7-hydroxyl pyridyl acetic acid oxidative metabolites were predicted for the first time in our study using EC/LC/MS and liver microsomes. We found oxidation by dechlorination to be one of the major metabolism mechanisms of FLP. Thus, our results revealed that EC/LC/MS-based metabolic elucidation was more advantageous on time and cost of analysis and enabled matrix-free detection with valuable information about the mechanisms and intermediates of metabolism processes.
This paper reviews state-of-the-art in nondestructive testing (NDT) and semidestructive testing (SDT) methods applicable for imaging the condition of structural timber. Both NDT and SDT imaging reveal defects, damages, and decay, while the extent of wood decay can also be quantified. Combined with an appropriate data interpretation concerning the internal defects, the mechanical properties of the material can also be assessed. The possibilities and limitations of the most relevant individual NDT and SDT methods, also in combination with each other, are outlined and compared. To facilitate comparison, many observations are reported based on the same test specimen.
A series of Ca-based coordination polymers were prepared mechanochemically by milling Ca(OH)2 with phthalic acid (H2oBDC), isophthalic acid (H2mBDC), and terephthalic acid (H2pBDC). The hydrated compounds [Ca(oBDC)(H2O)], [Ca(mBDC)(H2O)3.4], and [Ca(pBDC)(H2O)3] were prepared for the first time via mechanochemical routes. The refined structures were validated by extended X-ray absorption data. The new dehydrated compound [Ca(oBDC)] (1-H2O), obtained after the thermal post-treatment of 1 in a reversible phase transition process, was determined ab initio based on the powder X-ray diffraction (PXRD) data. The materials were thoroughly characterized using elemental analysis, thermal analysis, and spectroscopic methods: magic-angle spinning NMR and attenuated total reflection-infrared spectroscopy. The specific surface areas and sorption properties of the hydrated and dehydrated samples were determined using the isotherms of gas sorption and dynamic vapor sorption measurements.
The quality of research antibodies is an issue for decades. Although several papers have been published to improve the situation, their impact seems to be limited. This publication makes the effort to simplify the description of validation criteria in a way that the occasional antibody user is able to assess the validation level of an immunochemical reagent. A simple, 1-page checklist is supplied for the practical application of these criteria.
Mass spectrometry is applied as a tool for the elucidation of molecular structures. This premises that gas-phase structures reflect the original geometry of the analytes, while it requires a thorough understanding and investigation of the forces controlling and affecting the gas-phase structures. However, only little is known about conformational changes of oligonucleotides in the gas phase. In this study, a series of multiply charged DNA oligonucleotides (n¼15–40) has been subjected to a comprehensive tandem mass spectrometric study to unravel transitions between different ionic gas-phase structures. The nucleobase sequence and the chain length were varied to gain insights into their influence on the geometrical oligonucleotide organization. Altogether, 23 oligonucleotides were analyzed using collision-induced fragmentation. All sequences showed comparable correlation regarding the characteristic collision energy. This value that is also a measure for stability, strongly correlates with the net charge density of the precursor ions. With decreasing charge of the oligonucleotides, an increase in the fragmentation energy was observed. At a distinct charge density, a deviation from linearity was observed for all studied species, indicating a structural reorganization. To corroborate the proposed geometrical change, collisional cross-sections of the oligonucleotides at different charge states were determined using ion mobility-mass spectrometry. The results clearly indicate that an increase in charge density and thus Coulomb repulsion results in the transition from a folded, compact form to elongated structures of the precursor ions. Our data show this structural transition to depend mainly on the charge density, whereas sequence and size do not have an influence.
Rationale: The most commonly used fragmentation methods in tandem mass spectrometry (MS/MS) are collision‐induced dissociation (CID) and higher energy collisional dissociation (HCD). While in CID the preselected ions in the trap are resonantly (and m/z exclusively) excited, in HCD the entire m/z range experiences the dissociative acceleration. The different excitation is reflected in different fragment distributions. Methods: As a test‐bed for particularly pronounced fragmentation specificity, here MS/MS experiments on several 4‐mer oligonucleotides were conducted employing both collision methods and the results were thoroughly compared. Oligonucleotides are shown to be sensitive probes to subtle changes, especially in the negative ion mode. A detailed analysis of these differences reveals insight into the dissociation mechanics. Results: Thedifferencesarerepresentedinheat‐maps,whichallowforadirectvisualinspection oflargeamountsofdata.Inthesefalsecolourrepresentationsthe,sometimessubtle,changesinthe individual dissociation product distributions become distinct. Another advantage of these graphic plots can be found in the formation of systematic patterns. These patterns reflect trends in dissociation specificity which allow for the formulation of general rules in fragmentation behavior. Conclusions: Instruments equipped with two different excitation schemes for MS/MS are today widely available. Nonetheless, direct comparisons between the individual results are scarcely made. Such comparative studies bear a powerful analytical potential to elucidate fragmentation reaction mechanism.
Zearalenone (ZEN) and its phase II sulfate and glucoside metabolites have been detected in food and feed commodities. After consumption, the conjugates can be hydrolyzed by the human intestinal microbiota leading to liberation of ZEN that implies an underestimation of the true ZEN exposure. To include ZEN conjugates in routine analysis, reliable standards are needed, which are currently not available. Thus, the aim of the present study was to develop a facilitated biosynthesis of ZEN-14-sulfate, ZEN-14-glucoside and ZEN-16-glucoside. A metabolite screening was conducted by adding ZEN to liquid fungi cultures of known ZEN conjugating Aspergillus and Rhizopus strains. Cultivation conditions and ZEN incubation time were varied. All media samples were analyzed for metabolite formation by HPLC-MS/MS. In addition, a consecutive biosynthesis was developed by using Fusarium graminearum for ZEN biosynthesis with subsequent conjugation of the toxin by utilizing Aspergillus and Rhizopus species. ZEN-14-sulfate (yield: 49%) is exclusively formed by Aspergillus oryzae. ZEN-14-glucoside (yield: 67%) and ZEN-16-glucoside (yield: 39%) are formed by Rhizopus oryzae and Rhizopus oligosporus, respectively. Purities of ≥73% ZEN-14-sulfate, ≥82% ZEN-14-glucoside and ≥50% ZEN-16-glucoside were obtained by 1H-NMR. In total, under optimized cultivation conditions, fungi can be easily utilized for a targeted and regioselective synthesis of ZEN conjugates.
From simple homopolymers to functionalized, 3-dimensional structured copolymers, the complexity of polymeric materials has become more and more sophisticated. With new applications for instance in the semiconductor or pharmaceutical industry, the requirements for the characterization have risen with the complexity of the used polymers. For each additional distribution, an additional dimension in analysis is needed. Small, often isomeric heterogeneities in topology or microstructure can usually not be simply separated chromatographically or distinguished by any common detector, but affect the properties of materials significantly. For a drug delivery system for example, the degree of branching and branching distribution is crucial for the formation of micelles. Instead of a complicated, time consuming and/or expensive 2d-chromatography or ion mobility spectrometry (IMS) method, that also has its limitations, in this work a simple approach using size exclusion chromatography (SEC) coupled with electrospray ionization mass spectrometry (ESI) is proposed. The online coupling allows the analysis of reconstructed ion chromatograms (RIC) of each degree of polymerization. While a complete separation often cannot be achieved, the derived retention times and peak widths lead to information on the existence and dispersity of heterogeneities. Although some microstructural heterogeneities like short chain branching can for large polymers be characterized with methods such as light scattering, for oligomers where the heterogeneities just start to form and their influence is at the maximum, they are inaccessible with these methods. It is also shown, that with a proper calibration even quantitative information can be obtained. This method is suitable to detect small differences in e. g. branching, 3d-structure, monomer sequence or tacticity and could potentially be used in routine analysis to quickly determine deviations.
Time-dependent in situ measurement of atmospheric corrosion rates of duplex stainless steel wires
(2018)
Corrosion rates of strained grade UNS S32202 (2202) and UNS S32205 (2205) duplex stainless steel wires have been measured, in situ, using time-lapse X-ray computed tomography. Exposures to chloride-containing (MgCl2) atmospheric environments at 50 °C (12–15 M Cl− and pH ~5) with different mechanical elastic and elastic/plastic loads were carried out over a period of 21 months. The corrosion rates for grade 2202 increased over time, showing selective dissolution with shallow corrosion sites, coalescing along the surface of the wire. Corrosion rates of grade 2205 decreased over time, showing both selective and pitting corrosion with more localised attack, growing preferentially in depth. The nucleation of stress corrosion cracking was observed in both wires.
Unprecedented Ionization Processes in Mass SpectrometryProvide Missing Link between ESI and MALDI
(2018)
In the field of mass spectrometry,producing intact, highly-charged protein ions from surfaces is a conundrum with significant potential payoff in application areas ranging from bio-medical to clinical research. Here, we report on the ability to form intact, highly-charged protein ions on high vacuum time-of-flight mass spectrometers in the linear and reflectron modes achievable using experimental conditions that allow effective matrix removal from both the sample surfaces and from the charged clusters formed by the laser Ablation event. The charge states are the highest reported on high vacuum mass spectrometers, yet they remain at only around athird of the highest charge obtained using laser ablation with a suitable matrix at atmospheric pressure. Other than physical instrument modifications, the key to forming abundant and stable highly-charged ions appears to be the volatility of the matrix used. Cumulative results suggest mechanistic links between the ionization process reported here and traditional ionization methods of electrospray ionization and matrix-assisted laser desorp-tion/ionization.
A magnetically stabilized DC arc device, designed for operation with OES spectrometers was used to determine the elements Ag, Al, B, Ba, Be, Ca, Co, Cr, Cu, Fe, Ga, In, K, Li, Mg, Mn, Mo, Na, Nb, Ni, Si, Sn, Sr, Ti, V, Zr at trace levels of some μg kg−1 up to some 10 mg kg−1 in graphite powders. The coil for the generation of the homogeneous magnetic field was placed outside the closed arc chamber. The time programs of variable current strengths of the magnetic coil (up to 6 A) and of the arc (up to 17 A) which was burning in air were computer controlled. Halogenating gases (mainly CCl2F2, alternatively SF6 and NF3) were used as chemical modifiers to allow an effective release of the carbide forming trace elements. The mass flow controlled modifier gas was led through a special carrier electrode near the arc plasma. The emission radiation was guided by an optical fiber alternatively into two different ICP spectrometers in which the ICP torches were removed. The synergistic interaction of the magnetic field with the halogenating modifier gases resulted in a significant improvement in the analytical performance of the optimized analytical method. All our results for 22 trace elements were in good agreement with the means of an inter-laboratory comparison by BAM for certification of a pure graphite powder material; this holds also for our results for two other graphite materials. The optimized method showed an analytical performance suitable for comprehensive trace analysis of pure graphite. The instrumentation could be integrated into modern DC arc emission spectrometers to improve their analytical capabilities substantially.
Proline has been widely used for various cocrystallization applications, including pharmaceutical cocrystals. Combining enantiopure and racemic flurbiprofen and proline, we discovered 18 new crystal structures. Liquid-assisted grinding proved highly efficient to explore all the variety of crystal forms. A unique combination of stateof-the-art characterization techniques, comprising variable temperature in situ X-ray diffraction and in situ ball-milling, along with other physicochemical methods and density functional theory calculations, was indispensable for identifying all the phases. Analyzing the results of in situ ball-milling, we established a stepwise mechanism for the formation of several 1:1 cocrystals via an intermediate 2:1 phase. The nature of the solvent in liquidassisted grinding was found to significantly affect the reaction rate and, in some cases, the reaction pathway.
The aldoximes C11H9NO (I) and C15H11NO (II), synthesized in ca 90%yield, by
treatment of 1-naphthaldehyde or phenanthrene-9-carbaldehyde, respectively,
with hydroxylamine hydrochloride and sodium carbonate, have been characterized
by IR, 1H, 13C and DEPT-135 NMR spectroscopies, and also by singlecrystal
X-ray diffraction analysis. The molecules of (I) and (II) are
conformationally similar, with the aldoxime substituent groups lying outside
the planes of the naphthalene or phenanthrene rings, forming dihedral angles
with them of 23.9 (4) and 27.9 (6)°, respectively. The crystal structures of both
(I) and (II) are similar with a single intermolecular O—H...N hydrogenbonding
interaction, giving rise to the formation of one-dimensional polymeric
chains extending along the 21 (b) screw axes in each.
An artificial digestion of silver nitrate is reported. It is shown that AgSCN nanoparticles emerge from ionic silver in saliva and remain present during the entire digestion process. The particles were characterized by infrared spectroscopy and small- and wide-angle X-ray scattering (SAXS/WAXS) regarding their composition and size distribution.
We found cascade IR generation in Al laser induced plasma. This generation includes doublet transitions 3s25s 2S1∕2→ 3s24p 2P1∕2,3∕2 → 3s24s 2S1∕2; corresponding to strong lines at 2110 and 2117 nm, and much weaker lines at 1312–1315 nm. The 3s25s2S 1∕2 starting IR generation level is directly pumped from the 3s23p 2P3∕2 ground level. The starting level for UV generation at 396.2 nm (transitions 3s24s 2S1∕2 → 4p 2P3∕2) is populated due to the fast collisional processes in the plasma plume. These differences led to different time and special dependences on the lasing in the IR and UV spectral range within the aluminum laser induced plasma.
In this article the question of the certification of calibration samples for the characterisation of advanced thin film materials is addressed within the framework of reliable process control or quality management purposes. Reference measurement techniques can be used in order to address the gap in appropriate certified reference materials (CRMs) for thin film analyses. They allow for qualifying out-of-production samples originating from an operating production line as calibration samples. As a template for this procedure, CIGS [Cu(In,Ga)Se2] layers, that are absorber layers for high efficiency thin-film solar cells, have been used for establishing and validating reference-free X-ray fluorescence (XRF) analysis and Auger-electron spectroscopy (AES) as reference measurement techniques. The focus was on determining the average mole fractions in the CIGS layers obtaining results traceable to the SI unit system. Reference-free XRF is physically traceable and is based upon radiometrically calibrated instrumentation and knowledge of atomic fundamental data. Sputter-assisted AES can be established as a chemically traceable method after careful calibration using a certified reference material (CRM) based on a total number counting method.
For the first time, an international comparison was conducted on the determination of the purity of a high purity element. Participants were free to choose any analytical approach appropriate for their institute’s applications and services. The material tested was a high purity zinc, which had earlier been assessed for homogeneity and previously used in CCQM-K72 for the determination of six defined metallic impurities. Either a direct metal assay of the Zn mass fraction was undertaken by EDTA titrimetry, or an indirect approach was used wherein all impurities, or at least the major ones, were determined and their sum subtracted from ideal purity of 100 %, or 1 kg/kg. Impurity assessment techniques included glow discharge mass spectrometry, inductively coupled plasma mass spectrometry and carrier gas hot extraction/combustion analysis. Up to 91 elemental impurities covering metals, non-metals and semi-metals/metalloids were quantified. Due to the lack of internal experience or experimental capabilities, some participants contracted external laboratories for specific analytical tasks, mainly for the analysis of non-metals. The reported purity, expressed as zinc mass fraction in the high purity zinc material, showed excellent agreement for all participants, with a relative standard deviation of 0.011 %. The calculated reference value, w(Zn) = 0.999 873 kg/kg, was assigned an asymmetric combined uncertainty of + 0.000025 kg/kg and – 0.000028 kg/kg. Comparability amongst participating metrology institutes is thus demonstrated for the purity determination of high purity metals which have no particular difficulties with their decomposition / dissolution process when solution-based analytical methods are used, or which do not have specific difficulties when direct analysis approaches are used. Nevertheless, further development is required in terms of uncertainty assessment, quantification of non-metals and the determination of purity of less pure elements and/or for those elements suffering difficulties with the decomposition process.
A frequently studied environmental contaminant is the active substance diclofenac, which is removed insufficiently in sewage treatment plants. Since its inclusion in the watch list of the EU Water Framework Directive, the concentrations in surface waters will be determined throughout Europe. For this, still, more precise analytical methods are needed. As a reference, HPLC-MS is frequently employed. One of the major metabolites is 4’-hydroxydiclofenac (4’-OH-DCF). Also, diclofenac lactam is important for assessing degradation and transformation. Aceclofenac (ACF), the glycolic acid ester of diclofenac is used as a drug, too, and could potentially be cleaved to yield diclofenac again. In various sewage treatment plant influent samples, diclofenac, 4’-OH-DCF, DCF lactam and ACF could be determined with detection limits of 3 µg/L, 0.2 µg/L, 0.17 µg/L and 10 ng/L, respectively.
Single-cell analysis by ICP-MS/MS as a fast tool for cellular bioavailability studies of arsenite
(2018)
Single-cell inductively coupled plasma mass spectrometry (SC-ICP-MS) has become a powerful and fast tool to evaluate the elemental composition at a single-cell level. In this study, the cellular bioavailability of arsenite (incubation of 25 and 50 μM for 0-48 h) has been successfully assessed by SC-ICP-MS/MS for the first time directly after re-suspending the cells in water. This procedure avoids the normally arising cell membrane permeabilization caused by cell fixation methods (e.g. methanol fixation). The reliability and feasibility of this SC-ICP-MS/MS approach with a limit of detection of 0.35 fg per cell was validated by conventional bulk ICP-MS/MS analysis after cell digestion and parallel measurement of sulfur and phosphorus.
Development and market introduction of new nanomaterials trigger the need for an adequate risk assessment of such products alongside suitable risk communication measures. Current application of classical and new nanomaterials is analyzed in context of regulatory requirements and standardization for chemicals, food and consumer products. The challenges of nanomaterial characterization as the main bottleneck of risk assessment and regulation are presented. In some areas, e.g., quantification of nanomaterials within complex matrices, the establishment and adaptation of analytical techniques such as laser ablation inductively coupled plasma mass spectrometry and others are potentially suited to meet the requirements. As an example, we here provide an approach for the reliable characterization of human exposure to nanomaterials resulting from food packaging. Furthermore, results of nanomaterial toxicity and ecotoxicity testing are discussed, with concluding key criteria such as solubility and fiber rigidity as important parameters to be considered in material development and regulation. Although an analysis of the public opinion has revealed a distinguished rating depending on the particular field of application, a rather positive perception of nanotechnology could be ascertained for the German public in general. An improvement of material characterization in both toxicological testing as well as end-product control was concluded as being the main obstacle to ensure not only safe use of materials, but also wide acceptance of this and any novel technology in the general public.
The recently reported luminescent chromium(III) complex 13+ ([Cr(ddpd)2]3+; ddpd=N,N’-dimethyl-N,N’-dipyridine-2-yl-pyridine-2,6-diamine) shows exceptionally strong near-IR emission at 775 nm in water under ambient conditions (F=11%) with a microsecond lifetime as the ligand design in 13+ effectively eliminates non-radiative decay pathways, such as photosubstitution, back-intersystem crossing, and trigonal twists. In the absence of energy acceptors, such as dioxygen, the remaining decay pathways are energy transfer to high energy solvent and ligand oscillators, namely OH and CH stretching vibrations. Selective deuteration of the solvents and the ddpd ligands probes the efficiency of these oscillators in the excited state deactivation. Addressing these energytransfer pathways in the first and second coordination sphere furnishes a record 30% quantum yield and a 2.3 millisecond lifetime for a metal complex with an earth-abundant metal ion in solution at room temperature.
We designed and synthesized triphenylamine based and coumarin fused rhodamine hybrid dyes and characterized using 1H, 13C NMR and HR-LCMS analysis. Both the newly synthesized hybrid dyes were found to show red shifted absorption as well as emissions and large Stokes shift (40e68 nm) as compared to the small Stokes shift (25e30 nm) of reported dyes Rhodamine B and 101. Photophysical properties of these dyes were studied in different solvents and according to the solvents acidity or basicity they preferred to remain in their spirocyclic or open form in different ratio. We studied the spirocyclic as well as open form derivatives of these dyes for their viscosity sensitivity in three different mixture of solvents i.e. polar-protic [EtOH-PEG 400], polar-aprotic [toluene-PEG 400] and non-polaraprotic [toluene-paraffin]. They are found to show very high viscosity sensitivity in polar-protic mixture of solvents [EtOH-PEG 400] and hence concluded that both polarity as well as viscosity factor worked together for the higher emission enhancement rather than only viscosity factor. As these dyes showed very high viscosity sensitivity in their spirocyclic as well as open form, they can be utilized as viscosity sensors in visible as well as deep red region. We also correlated our experimental finding theoretically by using Density Functional theory computations.
A non-invasivemethod has been carried out to show the capabilities and limitations of Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS) for identifying of colourants and binders in modern reverse glass paintings. For this purpose, the reverse glass paintings “Zwei Frauen am Tisch” (1920–22), “Bäume” (1946) (both by Heinrich Campendonk), “Lofoten” (1933) (Edith Campendonk-van Leckwyck) and “Ohne Titel” (1954) (Marianne Uhlenhuth), were measured. In contrast to other techniques (e.g. panel and mural painting), the paint layers are applied in reverse succession. In multi-layered paint systems, the front paint layer may no longer be accessible. The work points out the different spectral appearance of a given substance (gypsum, basic lead white) in reverse glass paintings. However, inverted bands, band overlapping and derivative-shaped spectral features can be interpreted by comparing the spectra fromthe paintingswith spectra frompure powders and pigment/linseed oil mock-ups. Moreover, the work focuses on this method's capabilities in identifying synthetic organic pigments (SOP). Reference spectra of three common SOP (PG7, PY1, PR83) were obtained from powders and historical colour charts.We identified PR83 and PY1 in two reverse glass paintings, using the measured reference spectra. The recorded DRIFTS spectra of pure linseed oil, gum Arabic, mastic, polyvinyl acetate resin and bees wax can be used to classify the binding media of the measured paintings.
An immunohistochemical method is described to visualize the distribution of metallothioneins 1/2 (MT 1/2) and metallothionein 3 (MT 3) in human ocular tissue. It is making use of (a) antibodies conjugated to gold nanoclusters (AuNCs) acting as labels, and (b) laser ablation (LA) coupled to inductively coupled plasma – mass spectrometry (ICP-MS).Water-soluble fluorescent AuNCs (with an average size of 2.7 nm) were synthesized and then conjugated to antibody by carbodiimide coupling. The surface of the modified AuNCs was then blocked with hydroxylamine to avoid nonspecific interactions with biological tissue. Immunoassays for MT 1/2 and MT 3 in ocular tissue sections (5 μm thick) from two post mortem human donors were performed. Imaging studies were then performed by fluorescence using confocal microscopy, and LA-ICP-MS was performed in the retina to measure the signal for gold. Signal amplification by the >500 gold atoms in each nanocluster allowed the antigens (MT 1/2 and MT 3) to be imaged by LA-ICP-MS using a laser spot size as small as 4 μm. The image patterns found in retina are in good agreement with those obtained by conventional fluorescence immunohistochemistry which was used as an established reference method.
The aim of this study was to identify specific chemical bonds and characteristic structures in melanoidins formed from D-glucose and L-alanine between 130 and 200 °C. The results might be used to control the type and amount of melanoidin produced during food processing. For this purpose, complementary techniques, such as FTIR, NMR, EPR, and MALDI-ToF, were employed. At 160 °C color, solubility and UV/Vis absorption change characteristically and consequently, structural transformations could be observed in FTIR and NMR spectra. For example, sharp signals of N-H, C-N, and C-H oscillations in the L-alanine spectrum are prone to inhomogeneous broadening in melanoidins prepared above 150 °C. These changes are caused due to formation of heterogeneous macromolecular structures and occur during condensation reactions that lead to an increasing loss of water from the melanoidins with increasing temperatures. Additionally, MALDI-ToF-MS indicates the polymerization of glyoxal/glyoxylic acid and EPR shows the formation of radical structures.
Pulse thermography (PT) has proven to be a valuable non-destructive testing method to identify and quantify defects in fiber-reinforced polymers. To perform a quantitative defect characterization, the heat diffusion within the material as well as the material parameters must be known. The heterogeneous material structure of glass fiber-reinforced polymers (GFRP) as well as the semitransparency of the material for optical excitation sources of PT is still challenging. For homogeneous semitransparent materials, 1D analytical models describing the temperature distribution are available.
Here, we present an analytical approach to model PT for laterally inhomogeneous semitransparent materials.We show the validity of the model by considering different configurations of the optical heating source, the IR camera, and the differently coated GFRP sample. The model considers the lateral inhomogeneity of the semitransparency by an additional absorption coefficient. It includes additional effects such as thermal losses at the samples surfaces, multilayer systems with thermal contact resistance, and a finite duration of the heating pulse. By using a sufficient complexity of the analytical model, similar values of the material parameters were found for all six investigated configurations by numerical fitting.
Quantitative analysis of complex proteins is a challenging task in modern bioanalytical chemistry. Commonly available isotope labels are still suffering from limitations and drawbacks, whereas new metal labels open numerous possibilities in mass spectrometric analyses. In this work, we have developed a newmetal labeling strategy to tag glycan structures of proteins, more particularly antibodies. The oligosaccharide glycans were selectively trimmed to the last N-acetylglucosamine to which an artificial azide containing galactose residue was bound. This azide can be used for subsequent cycloaddition of an alkyne. Therefore, we developed a lanthanide-containing macrocyclic reagent to selectively connect to this azido galactose. In summary, the glycan structures of an antibody can be labeled with a metal functionality using this approach. Furthermore, the functionality of the antibodies can be fully maintained by labeling the Fc glycans instead of using labeling reagents that target amino or thiol groups. This approach enables the possibility of using elemental, besides molecular mass spectrometry, for quantitative analyses or imaging experiments of antibodies in complex biological samples.
High-Amplitude Surge of a Pitching Airfoil: Complementary Wind- and Water-Tunnel Measurements
(2018)
RECENT interest in gust response, rotorcraft forward flight and wind energy, among other applications, has focused on streamwise oscillations of nominally two-dimensional airfoils in attached and separated flows. The airfoil may be simultaneously held at constant incidence or execute some maneuver, such as pitch.
The relative freestream is spatially uniform but temporally unsteady, and this can be accomplished in a ground-test facility in two ways. The first method is to vary the output of the prime mover, such as the rotational speed of the impeller or the blower driving a wind tunnel, or (alternatively) to vary the pressure drop in the tunnel, thereby varying the flow speed in the test section, despite nominally constant primemover revolutions per minute. The second method is used to keep the tunnel’s operating speed constant, as well as to move the test article in the streamwise direction, fore and aft (for example, via an electric linear motor), such that the relative freestream speed felt by the test article varies according to some waveform. Typically, the latter approach is chosen in water tunnels, where there is too much tunnel-circuit inertia to vary the flow speed directly but where the usually low tunnel test section flow speeds enable large excursions in the relative freestream by oscillation of the test article. In fact, outright reverse flow is possible by moving the test article in the laboratory frame at a higher speed than the water-tunnel flow speed. In either case, a sinusoidal relative-speed waveform is the most intuitively realizable, and this can be combined with similar oscillations in the airfoil incidence angle or other kinematics. Although the two methods of realizing streamwise oscillations are mechanically distinct, experimental comparisons between an oscillating test article in a water tunnel and a stationary test article in a wind tunnel with a louvermechanismhave demonstrated agreement in themeasured lift and drag histories. Such experimentswere performed by Granlund et al. for a 10% freestream amplitude oscillation and fixed airfoil incidence, comparing a free-surface water tunnel and a closed-circuit wind tunnel. After buoyancy was subtracted from the wind-tunnel data (resulting from the louver pressure drop) and the model inertia subtracted from the water-tunnel data (resulting from acceleration of the test article), the remaining lift and drag histories matched well at the low freestream oscillation amplitude regime. The work of Granlund et al. was later extended to high-advance-ratio streamwise oscillations of 50% amplitude by Greenblatt et al., where the aerodynamic histories of the water-tunnel and wind-tunnel facilities were compared in combined pitch and freestreamoscillations (governed by relative pitch phase), pure pitch oscillations, and purely freestream oscillations. Agreement between the two facilities’ data for fixed-incidence streamwise oscillations was reasonably good, and in fact, better than agreement in just the static lift and drag, evidently owing to differences in blockage and model-support systems. Additionally, Greenblatt et al. determined there was no strong coupling between simultaneous freestream oscillations and pitch oscillations on resultant lift and moment coefficients.
Abstract: Hybrid silicon-based organic/inorganic (multi)block
copolymers are promising polymeric precursors to create
robust nano-objects and nanomaterials due to their sol–gel active moieties via self-assembly in solution or in bulk. Such nano-objects and nanomaterials have great potential in bio-medicine as nanocarriers or scaffolds for bone regeneration as well as in materials science as Pickering emulsifiers, pho-
tonic crystals or coatings/films with antibiofouling, antibac-
terial or water- and oil-repellent properties. Thus, this Review outlines recent synthetic efforts in the preparation of these hybrid inorganic/organic block copolymers, gives an
overview of their self-assembled structures and finally presents recent examples of their use in the biomedical field and
material science.
Structural changes of highly active Pd/MeOx (Me = Fe, Co, Ni) during catalytic methane combustion
(2018)
Fe2O3, Co3O4 and NiO nanoparticles were prepared via a citrate method and further functionalized with Pd by impregnation. The pure oxides as well as Pd/Fe2O3, Pd/Co3O4, and Pd/NiO (1, 5 and 10 wt % Pd) were employed for catalytic methane combustion under methane lean (1 vol %)/oxygen rich (18 vol %, balanced with nitrogen) conditions. Already, the pure metal oxides showed a high catalytic activity leading to complete conversion temperature of T100 ≤ 500 °C. H2-TPR (Temperature-programmed reduction) experiments revealed that Pd-functionalized metal oxides exhibited enhanced redox activity compared to the pure oxides leading to improved catalytic combustion activity at lower temperatures. At a loading of 1 wt % Pd, 1Pd/Co3O4 (T100 = 360 °C) outperforms 1Pd/Fe2O3 (T100 = 410 °C) as well as 1Pd/NiO (T100 = 380 °C). At a loading of 10 wt % Pd, T100 could only be slightly reduced in all cases. 1Pd/Co3O4 and 1Pd/NiO show reasonable stability over 70 h on stream at T100. XPS (X-ray photoelectron spectroscopy) and STEM (Scanning transmission electron microscopy) investigations revealed strong interactions between Pd and NiO as well as Co3O4, respectively, leading to dynamic transformations and reoxidation of Pd due to solid state reactions, which leads to the high long-term stability.
Fuel contamination of soils display complex and variable hydrocarbon mixtures with different volatility and toxicity characteristics. A recently suggested headspace procedure for the structure-based quantification of volatile hydrocarbons is evaluated regarding repeatability, reproducibility, and practical robustness. Three aliphatic and three aromatic fractions covering the boiling range between 69 and 216°C were defined as summation parameters by their respective equivalent carbon number ranges. A standard mixture of 35 aliphatic and aromatic hydrocarbons was used for calibration on basis of selected mass fragments specific for the aliphatics and aromatics, respectively. Two standard soils were fortified with the standard mixture or different fuels, respectively, and submitted to the analytical procedure. Limit of detection (LOD) and limit of quantification (LOQ) were for all fractions lower than 0.1 and 0.3 mg/kg, respectively. Analyte recovery was linear up to between 20 and 110 mg hydrocarbons/kg soil depending on the fraction. Hydrocarbon recovery ranged between 80% and 110% depending on the fraction and the repeatability was typically better than 10%. Finally, the impact of extraction solvent variation, column solid-phase polarity, and alternative summation of fractions were investigated. The procedure was applied to liner samples taken from a site contaminated with aviation fuel and its practicability is discussed.
Slags from the nonferrous metals industry have great potential to be used as feedstocks for the production of alkali-activated materials. Until now, however, only very limited information has been available about the structural characteristics of these materials. In the work presented herein, synthetic slags in the CaO–FeOx–SiO2 system, representing typical compositions of Fe-rich slags, and inorganic polymers (IPs) produced from the synthetic slags by activation with alkali Silicate solutions have been studied by means of X-ray absorption near-edge structure (XANES) spectroscopy at the Fe K-edge. The iron in the slags was largely Fe2+, with an average coordination number of approximately 5 for the iron in the amorphous fraction. The increase in average oxidation number after alkali-activation was conceptualized as the consequence of slag dissolution and IP precipitation, and employed to calculate the degrees of reaction of the slags. The degree of reaction of the slags increased with increasing amorphous fraction. The iron in the IPs had an average coordination number of approximately 5; thus, IPs produced from the Fe-rich slags studied here are not Fe-analogs of aluminosilicate geopolymers, but differ significantly in terms of structure from the latter.
Powder X-ray diffraction is a time-consuming and challenging task, especially for preparation of sensitive phases like ettringite and calcium-silicate-hydrate (C-S-H) phases. Fine-grained ultrahigh-performance concrete (UHPC) with an average grain size <100 μm could be investigated directly without time-consuming milling. As a proof of concept, small UHPC cylinders with plain surfaces were investigated with a newly designed sample holder. The comparison with conventionally prepared powder shows the feasibility of fast qualitative phase analysis using this approach. As a great benefit, a depth-dependent analysis, as well as a comparison of surface layers and core material, was carried out.
Polymers with intrinsic microporosity are promising candidates for the active separation layer in gas separation membranes. Here, the vibrational density of states (VDOS) for PIM-1, the prototypical polymer with intrinsic microporosity, is investigated by means of inelastic neutron scattering. The results are compared to data measured for a more conventional high-performance polyimide used in gas separation membranes (Matrimid). The measured data show the characteristic low frequency excess contribution to VDOS above the Debye sound wave level, generally known as the Boson peak in glass-forming materials. In comparison to the Boson peak of Matrimid, that of PIM-1 is shifted to lower frequencies. This shift is discussed considering the microporous, sponge-like structure of PIM-1 as providing a higher compressibility at the molecular scale than for conventional polymers. For an annealed PIM-1 sample, the Boson peak shifts to higher frequencies in comparison to the un-annealed sample. These changes in the VDOS of the annealed PIM-1 sample are related to changes in the microporous structure as confirmed by X-ray scattering.
Chemical functionalization for quantitative spectroscopic labeling on macroscopically flat surfaces
(2018)
This chapter highlights the application of chemical derivatization (CD) to facilitate the quantification of surface functional groups being an important issue for a wide field of applications. The selective attachment of a chemical label to a surface functional group being afterwards exclusively detectable by a highly sensitive technique overcomes the problem of characterizing low amounts of functional groups on macroscopically flat surfaces. The most frequently employed methods include CD X-ray photoelectron spectroscopy, ultraviolet/visible absorption, and fluorescence spectroscopy, as well as time-of-flight secondary ion mass spectrometry. Herein, the basic conditions for the different techniques regarding the specific surface functional group which need to be quantified are discussed. Additionally, the substrate highly influences the compatibility of the corresponding method. Because not just the quantification but also the preparation of the desired application is important, a summary of different preparation methods for glass, polymer and gold substrates is presented.
Time-resolved phase-contrast microscopy is employed to visualize spatio-temporal thermal transients induced by tight focusing of a single Ti:sapphire fs-laser pulse into a solid dielectric sample. This method relies on the coupling of the refractive index change and the sample temperature through the thermo-optic coefficient dn/dT. The thermal transients are studied on a timescale ranging from 10 ns up to 0.1 ms after laser excitation. Beyond providing direct insights into the laser–matter interaction, analyzing the results obtained also enables quantifying the local thermal diffusivity of the sample on a micrometer scale. Studies conducted in different solid dielectrics, namely amorphous fused silica (a-SiO2), a commercial borosilicate glass (BO33, Schott), and a custom alkaline earth silicate glass (NaSi66), illustrate the applicability of this approach to the investigation of various glassy materials.
Reaction procedures have been improved to achieve higher yields and shorter reaction times: one possibility is the usage of microwave reactors. In the literature, this is under discussion, for example, nonthermal effects resulting from the microwave radiation are claimed. Especially for the synthesis of nanomaterials, it is of crucial importance to be aware of influences on the reaction pathway. Therefore, we compare the syntheses of ultra-small silver nanoparticles via conventional and microwave heating. We employed a versatile one-pot polyol synthesis of poly(acrylic acid)-stabilized silver nanoparticles, which display superior catalytic properties. No microwave-specific effects in terms of particle size distribution characteristics, as derived by small-angle X-ray scattering and dynamic light scattering, are revealed. Because of the characteristics of a closed system, microwave reactors give access to elevated temperatures and pressures. Therefore, the speed of particle formation can be increased by a factor of 30 when the reaction temperature is increased from 200 to 250 °C. The particle growth process follows a cluster coalescence mechanism. A postsynthetic incubation step at 250 °C induces a further growth of the particles while the size distribution broadens. Thus, utilization of microwave reactors enables an enormous decrease of the reaction time as well as the opportunity of tuning the particle size. Possibly, decomposition of the stabilizing ligand at elevated temperatures results in reduced yields. A compromise between short reaction times and high yields can be found at a temperature of 250 °C and a corresponding reaction time of 30 s.
The present study shows the potential of high-resolution imaging and nano-Fourier-transform infrared (nano-FTIR) spectroscopy for corrosion science. The protective oxidation layers of different chlorine-gas treated silicon
carbides (SiCs) were characterized with these techniques. A nitrified SiC showed the highest resistant strength against chlorine corrosion at 1000 °C compared to the other SiCs. Nano-FTIR spectroscopy with a lateral resolution below 40 nm detected differences in the crystallinity of the bulk-SiC and in the transitional region to the protective layer. Furthermore, high-resolution imaging provides deep insight in the interfacial layer between bulk-SiC and the protective oxidation layer on sub-micrometer scale.
Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been revealed as a convenient technique for trace elemental imaging in tissue sections, providing elemental 2D distribution at a quantitative level. For quantification purposes, in the last years several approaches have been proposed in the literature such as the use of CRMs or matrix matched standards. The use of Isotope Dilution (ID) for quantification by LA-ICP-MS has been also described, being mainly useful for bulk analysis but not feasible for spatial measurements so far. In this work, a quantification method based on ID analysis was developed by printing isotope-enriched inks onto kidney slices from rats treated with antitumoral Pt-based drugs using a commercial ink-jet device, in order to perform an elemental quantification in different areas from bio-images. For the ID experiments ¹⁹⁴Pt enriched platinum was used. The methodology was validated by deposition of natural Pt standard droplets with a known amount of Pt onto the surface of a control tissue, where could be quantified even 50 pg of Pt, with recoveries higher than 90%. The amount of Pt present in the whole kidney slices was quantified for cisplatin, carboplatin and oxaliplatin-treated rats. The results obtained were in accordance with those previously reported. The amount of Pt distributed between the medullar and cortical areas was also quantified, observing different behavior for the three drugs.
Optical elemental analysis in the gas phase typically relies on electrically driven plasmas. As an alternative approach, laser-induced plasmas (LIPs) have been suggested but have so far been only scarcely used.
Here, a novel signal enhancement strategy for laser-based airborne plasma optical Emission spectroscopy for gas phase analytics is presented. In contrast to an electrically driven plasma, in the laser-induced analogue dynamic matter transport equilibrium builds up. The latter results in a rarefied density regime in the plasma core itself, surrounded by an area of compressed matter. The central rarefaction leads to a decrease in plasma intensity and analyte number density, both of which are detrimental for analytical purposes. Since the repetitive ignition of LIPs is a transient process, a restoration of the former gaseous medium by other dynamically equilibrated diffusion processes would be favourable. The presented combination of an airborne LIP and an ultrasonic acoustic resonator yields a fourfold signal enhancement while the Background contribution of ubiquitous air is at the same time effectively suppressed. Since the entire enhancement effect occurs without contact, no additional sources for abrasive sample contamination are introduced.
Previously applied methods for the quantification of sulphur in copper and other pure metals revealed a lack of SI-traceability and additionally showed inconsistent results, when different methods were compared.
Therefore, a reference procedure is required which allows SI-traceable values accompanied by a Sound uncertainty budget. In this study a procedure was developed for the quantification of total sulphur in copper at low concentration levels using inductively coupled plasma-isotope dilution mass spectrometry (ICP-IDMS). The major part of the copper matrix was separated by adding ammonia which forms a complex with the copper while releasing the sulphur followed by chromatographic separation using a weak cation resin. After that the sulphur fraction was further purified by chromatographic means using first an anion exchange method and second a chelating resin. The developed procedure shows high performance, especially concerning high efficiency in matrix removal (>99.999%) while keeping the recovery of sulphur above 80%. Procedure blanks are in the order of 3–53 ng resulting in LOD and LOQ values of 0.2 mg g1 and 0.54 mg g1, respectively. The procedure is sufficient to facilitate value assignment of the total sulphur mass fraction in reference materials. Additionally, relative measurement uncertainties were calculated to be below 1% and the measurement results were traceable to the SI. The procedure reported in this study is a new reference procedure for sulphur measurement in copper, being fit for two major purposes, certification of reference materials and assignment of reference values for inter-laboratory comparison.
The degradation of the chemotherapy drug 5-fluorouracil by a non-pristine metal surfaces is studied.Using density functional theory, X-ray photoelectron spectroscopy and X-ray absorption spectroscopy we show that the drug is entirely degraded by medical-grade silver surfaces, already at body temperature,and that all of the fluorine has left the molecule, presumably as HF. Remarkably, this degradation is even more severe than that reported previously for 5-fluorouracil on a pristine monocrystalline silver surface(in which case 80% of the drug reacted at body temperature) [1]. We conclude that the observed reaction is due to a reaction pathway, driven by H to F attraction between molecules on the surface, which results in the direct formation of HF; a pathway which is favoured when competing pathways involving reactive Ag surface sites are made unavailable by environmental contamination. Our measurements indicate that realistically cleaned, non-pristine silver alloys, which are typically used in medical applications, can result in severe degradation of 5-fluorouracil, with the release of HF – a finding which may have important implications for the handling of chemotherapy drugs.
For the first time, X-ray refraction techniques are proven for the identification of void formation in Ti-6Al-4V parts produced by selective laser melting. The topology and volume fraction of pores are measured in samples produced with different laser energy density. Unique X-ray refraction methods identify different kinds of defects, characteristic to the regions below and above the Optimum laser energy density, namely unprocessed powder (unmolten powder particles, balling effect, and Fusion defects) from empty keyhole pores. Furthermore, it is possible to detect small inhomogeneities (voids or cracks) with sizes below the spatial resolution of optical microscopy and X-ray computed tomography.
Data processing in the calibration-free laser-induced breakdown spectroscopy (LIBS) is usually based on the solution of the radiative transfer equation along a particular line of sight through a plasma plume. The LIBS data processing is generalized to the case when the spectral data are collected from large portions of the plume. It is shown that by adjusting the optical depth and width of the lines the spectra obtained by collecting light from an entire spherical homogeneous plasma plume can be least-square fitted to a spectrum obtained by collecting the radiation just along a plume diameter with a relative error of 10 −11 or smaller (for the optical depth not exceeding 0.3) so that a mismatch of geometries of data processing and data collection cannot be detected by fitting. Despite the existence of such a perfect least-square fit, the errors in the line optical depth and width found by a data processing with an inappropriate geometry can be large. It is shown with analytic and numerical examples that the corresponding relative errors in the found elemental number densities and concentrations may be as high as 50% and 20%, respectively. Safe for a few found exceptions, these errors are impossible to eliminate from LIBS data processing unless a proper solution of the radiative transfer equation corresponding to the ray tracing in the spectral data collection is used.
In order to investigate their microcracking behaviour, the microstructures of several β-eucryptite ceramics, obtained from glass precursor and cerammed to yield different grain sizes and microcrack densities, were characterized by laboratory and synchrotron x-ray refraction and tomography. Results were compared with those obtained from scanning electron microscopy (SEM). In SEM images, the characterized materials appeared fully dense but computed tomography showed the presence of pore clusters. Uniaxial tensile testing was performed on specimens while strain maps were recorded and analyzed by Digital Image Correlation (DIC). X-ray refraction techniques were applied on specimens before and after tensile testing to measure the amount of the internal specific surface (i.e., area per unit volume). X-ray refraction revealed that (a) the small grain size (SGS) material contained a large specific surface, originating from the grain boundaries and the interfaces of TiO2 precipitates; (b) the medium (MGS) and large grain size (LGS) materials possessed higher amounts of specific surface compared to SGS material due to microcracks, which decreased after tensile loading; (c) the precursor glass had negligible internal surface. The unexpected decrease in the internal surface of MGS and LGS after tensile testing is explained by the presence of compressive regions in the DIC strain maps and further by theoretical arguments. It is suggested that while some microcracks merge via propagation, more close mechanically, thereby explaining the observed X-ray refraction results. The mechanisms proposed would allow the development of a strain hardening route in ceramics.
Fluorescent sensory MIP (molecularly imprinted polymer) particles were combined with a droplet-based 3D microfluidic system for the selective determination of a prototype small-molecule analyte of environmental concern, 2,4-dichlorophenoxyacetic acid or 2,4-D, at nanomolar concentration directly in water samples. A tailor-made fluorescent indicator cross-linker was thus designed that translates the binding event directly into an enhanced fluorescence signal. The phenoxazinone-type cross-linker was co-polymerized into a thin MIP layer grafted from the surface of silica microparticles following a RAFT (reversible addition-fragmentation chain transfer) polymerization protocol. While the indicator cross-linker outperformed its corresponding monomer twin, establishment of a phase-transfer protocol was essential to guarantee that the hydrogen bond-mediated signalling mechanism between the urea binding site on the indicator cross-linker and the carboxylate group of the analyte was still operative upon real sample analysis. The latter was achieved by integration of the fluorescent core-shell MIP sensor particles into a modular microfluidic platform that allows for an in-line phasetransfer assay, extracting the analyte from aqueous sample droplets into the organic phase that contains the sensor particles. Real-time fluorescence determination of 2,4-D down to 20 nM was realized with the system and applied for the analysis of various surface water samples collected from different parts of the world.