Circular Economy
Filtern
Dokumenttyp
Schlagworte
- Mauerwerkbruch (13)
- Rohstoffliches Recycling (9)
- Papierasche (6)
- BOFS (5)
- Poröse Granulate (5)
- Hydraulic reactivity (4)
- Lightweight concrete (4)
- Masonry rubble (4)
- Recycling (4)
- Blended cements (3)
- Calcined clays (3)
- Cement (3)
- Leichte Gesteinskörnung (3)
- Leichte Gesteinskörnungen (3)
- Alkali-activated materials (2)
- Bio-based concrete (2)
- Brick clays (2)
- CDW recycling (2)
- Chemical admixtures (2)
- Education (2)
- Leichtbeton (2)
- Lightweight aggregates (2)
- Polysaccharides (2)
- Portland Cement (2)
- Recycling aggregates (2)
- Repair mortar (2)
- Reststoffe (2)
- Rheology (2)
- Speichermaterial (2)
- Supplementary cementitious materials (2)
- Sustainability (2)
- Alite (1)
- Alite hydraulic reactivity (1)
- Alkali-activated slag (1)
- Bau- und Abbruchabfälle (1)
- Blended cement (1)
- Bodenfilter (1)
- Brick clay (1)
- Brown Coal Fly Ash (1)
- Building and Construction (1)
- Calcined clay (1)
- Calcium silicate (1)
- Carbon footprint (1)
- Civil Engineering (1)
- Climate (1)
- Clinker substitute (1)
- Concrete (1)
- Construction and demolition waste (1)
- Crystalline phase identification (1)
- Denkmalpflege (1)
- Environment (1)
- Feedstock recycling (1)
- Filtermaterial (1)
- General Materials Science (1)
- Geopolymers (1)
- Heavy metal removal (1)
- Hydration products (1)
- Hydrothermale Synthese (1)
- Illite (1)
- Illitic clays (1)
- Infraleichtbeton (1)
- Inorganic polymers (1)
- Iron speciation (1)
- Kaolinite (1)
- Leichtgranulat (1)
- Lightweight aggreagtes (1)
- Lightweight aggregates (LWA) (1)
- Lignite Coal (1)
- Materials (1)
- Nonferrous slag (1)
- Phosphorus availability (1)
- Process upscaling (1)
- Recovery (1)
- Recyclinggranulat (1)
- Rhenanite (1)
- Sciences (1)
- Sekundärrohstoff (1)
- Steelmaking slag (1)
- Steinergänzungsmörtel (1)
- Supplementary cementititous materials (1)
- Thermal analysis (1)
- Ton (1)
- Workability (1)
- X-ray absorption near-edge structure (1)
- X-ray absorption spectroscopy (1)
- X-ray diffraction (1)
- Zement (1)
- hydrothermale Behandlung (1)
- leichte Gesteinskörnung (1)
- poröse Granulate (1)
Organisationseinheit der BAM
- 7.4 Baustofftechnologie (37) (entfernen)
Eingeladener Vortrag
- nein (16)
Im Verbundforschungsprojekt REALight wurden Leichtgranulate aus gemischtem Mauerwerkbruch in einem thermischen Blähverfahren im Pilotmaßstab hergestellt. Im Teilprojekt der BAM stand die Charakterisierung dieser Leichtgranulate und ihre Anwendung in gebundenen Systemen im Vordergrund. Im Rahmen des Abschlussvortrags wurden Ergebnisse zur Entwicklung von Steinergänzungsmörteln sowie Infraleichtbeton vorgestellt.
Fused cement clinker can be produced from molten basic oxygen furnace slag (BOFS) by way of a reductive thermochemical treatment. During the thermochemical treatment, oxidic iron is reduced to metallic iron and separated. The resulting low-iron slag has a chemical and mineralogical composition similar to ordinary Portland cement (OPC) clinker. In this study, the hydraulic reactivity of the fused clinker from BOFS with and without gypsum was investigated using isothermal calorimetry, differential scanning calorimetry, in situ X-ray diffraction and powder X-ray diffraction. Furthermore, a synthetic fused clinker without foreign ions and fused clinker produced by a mixture of both materials was studied. The hydraulic reaction of the fused clinker from BOFS was considerably slower than that of OPC. However, the reaction can be accelerated by adding gypsum as a sulfate carrier. Furthermore, the results showed an increased reaction rate with decreasing content of foreign ions such as Fe, P or Mn.
Im Jahr 2020 fielen in Deutschland rund 220 Millionen Tonnen mineralische Bau- und Abbruchabfälle an, die als Sekundärrohstoffquelle genutzt werden können. Trotz hoher Recyclingquoten wird ein Teil der mineralischen Bau- und Abbruchabfälle immer noch deponiert oder in Anwendungen mit geringen Qualitätsanforderungen eingesetzt, da ein effektives Recycling dieser heterogenen Abfälle recht kompliziert ist. Bauschutt ist ein heterogener, SiO2-reicher Sekundärrohstoff, der sich aus einem Gemisch verschiedener abgebrochener Baumaterialien wie Ziegel, Betonfertigteile, Leichtbeton, Porenbeton, Kalksandsteine, Natursteine, Gips und Mörtel zusammensetzt. Die genaue Zusammensetzung hängt von der Abbruchstelle, der Vorsortierung und der Wiederaufbereitung in der Recyclinganlage ab. Eine direkte Wiederverwendung als rezyklierte Gesteinskörnung ist aufgrund der uneinheitlichen Zusammensetzung und des bis zu 50 %igen Feinanteils nach der mechanischen Aufbereitung nicht zulässig. Eine Möglichkeit, Mauerwerksschutt effektiv zu recyceln, ist die rohstoffliche Verwertung über ein chemisch-hydrothermales Umwandlungsverfahren, das poröse Granulate erzeugt. Durch die Porenstruktur dieser hydrothermal gehärteten Granulate ergeben sich Anwendungsmöglichkeiten als Filter- oder Wasserspeichermaterial, die über den Bausektor hinausgehen. Diese neuartigen Granulate können leichte Gesteinskörnungen natürlichen Ursprungs (z. B. Lavasand, Bimsstein) oder Körner aus natürlichen Rohstoffen (z. B. Blähton) ersetzen. Die neue Recyclingstrategie spart natürliche Ressourcen. Im Vergleich zur Herstellung von Blähton ist der Energieverbrauch wesentlich geringer. Ziel des Verbundprojektes HYTEGRA war die Entwicklung eines Verfahrens zur Herstellung von leichten Gesteinskörnungen aus SiO2- und CaO-reichen Sekundärrohstoffen. Als Rohstoffe wurden Mauerwerksschutt als SiO2-Quelle und Papierasche aus der energetischen Verwertung von Reststoffen der Altpapierverwertung als CaO-Quelle eingesetzt. Der komplette Prozess von der mechanisch-physikalischen Aufbereitung über die Bildung des Grüngranulats bis zur hydrothermalen Härtung wurde entwickelt und im Labormaßstab getestet. Die Anwendungen des hydrothermal gehärteten Granulats als Wasserspeichermaterial für die innere Nachbehandlung von hochfestem Beton, Pflanzensubstrat und Filtermaterial in Bodenfiltern zur Abwasserreinigung wurden untersucht. Der Beitrag gibt einen Überblick über die wichtigsten Ergebnisse des erfolgreich abgeschlossenen Verbundforschungsprojekts HYTEGRA.
Heterogeneous construction and demolition waste can be used as raw material to produce lightweight aggregates (LWA) similar to expanded clays. In the joint research project “REALight”, LWA were produced from masonry rubble in a thermal expanding process using a pilot production plant with a rotary kiln. Our research focuses on the characterisation of the novel LWA and their use in different hydraulically bound applications.
Infra-lightweight concrete (ILC) was produced with the novel LWA, which accounts for two thirds of total aggregate volume, and Celitement, which is a hydraulic binder with a low carbon footprint. Its dry bulk density is ≤ 800 kg/m³. Strength and durability properties are comparable to ILC data from the literature.
Lime-based repair mortars (LRM) containing LWA are beneficial for sandstone conservation due to their similar properties regarding porosity, water absorption and strength. A two-layer repair mortar system, which consists of a filling mortar to fill large voids and a covering mortar to modulate the surface texture to the historic sandstone, was developed.
In our contribution, we present results of the LWA characterisation according to the European standard EN 13055:2016. Requirements and challenges of the use of the novel LWA in ILC and LRM are discussed.
Heterogeneous construction and demolition waste can be used as raw material to produce lightweight aggregates (LWA) similar to expanded clays. In the joint research project “REALight”, LWA were produced from masonry rubble in a thermal expanding process using a pilot production plant with a rotary kiln. Our research focuses on the characterisation of the novel LWA and their use in different hydraulically bound applications.
Infra-lightweight concrete (ILC) was produced with the novel LWA, which accounts for two thirds of total aggregate volume, and Celitement, which is a hydraulic binder with a low carbon footprint. Its dry bulk density is ≤ 800 kg/m³. Strength and durability properties are comparable to ILC data from the literature.
Lime-based repair mortars (LRM) containing LWA are beneficial for sandstone conservation due to their similar properties regarding porosity, water absorption and strength. A two-layer repair mortar system, which consists of a filling mortar to fill large voids and a covering mortar to modulate the surface texture to the historic sandstone, was developed.
In our contribution, we present results of the LWA characterisation according to the European standard EN 13055:2016. Requirements and challenges of the use of the novel LWA in ILC and LRM are discussed.
Steelmaking slag is a by-product of steel production of which 4.5 Mt were produced in 2020 in Germany alone. It is mainly used in road construction, earthwork and hydraulic engineering. A smaller part is returned to the metallurgical circle, used as fertilizer or landfilled.
With this use, iron oxides still contained in steelmaking slag are lost. In addition, the possibility of producing higher-grade products from steelmaking slag is foregone. In recent decades, many researchers have investigated the production of Portland cement clinker and crude iron from basic oxygen furnace slags (BOFS) via a reductive treatment. Carbothermal treatment of liquid BOFS causes a reduction of iron oxides to metallic iron, which separates from the mineral phase due to its higher density. Simultaneously, the chemical composition of the reduced slag is adapted to that of the Portland cement clinker.
In this study, German BOFS was reduced in a small-scale electric arc furnace using petrol coke as a reducing agent. The resulting low-iron mineral product had a similar chemical composition to Portland cement clinker and was rich in the tricalcium silicate solid solution alite (Ca3SiO5). Based on its chemical and mineralogical composition, similar to that of Portland cement clinker, the reduced BOFS has the potential to react comparably. In our study, the reduced BOFS produced less heat of hydration compared to OPC and its hydraulic reaction was delayed. However, adding gypsum has been shown to accelerate the hydration rate of the reduced BOFS compared to that known from the calcium silicates of Portland cement clinker.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, producing a hydraulic binder and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.
Basic oxygen furnace slag (BOFS) is a by-product of steelmaking of which about 10.4 Mt are produced annually in the EU. BOFS is mostly used in road construction, earthwork and hydraulic engineering. However, in this use, the iron bound in BOFS is lost and the opportunity to produce higher value products from BOFS is forgone.
In recent decades, many researchers have investigated the production of both Portland cement clinker and crude iron from BOFS via a thermochemical reductive treatment. The reductive treatment of liquid BOFS causes a reduction of iron oxides to metallic iron, which separates from the mineral phase due to its higher density and can be recovered. An advantage of this process is that simultaneously the chemical composition of the reduced BOFS is adapted to that of Portland cement clinker and the hydraulic reactive mineral alite (Ca3SiO5) is formed.
In this study, German BOFS was reduced in a small-scale electric arc furnace and a low-iron mineral product rich in alite was produced. Despite a chemical and mineralogical composition similar to that of Portland cement clinker, the reduced BOFS produced less heat of hydration, and its reaction was delayed compared to Portland cement. However, adding gypsum accelerated the hydration rate of the reduced BOFS.
Further research to improve the hydraulic properties of the reduced BOFS is essential. If successful, the production of a hydraulic material and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.
Jährlich fallen in Deutschland etwa 75 Mio. t mineralische Bau- und Abbruchabfälle an, die eine vielfältig einsetzbare sekundäre Rohstoffquelle darstellen. Trotz hoher Verwertungsquoten werden Bau- und Abbruchabfälle zum Teil deponiert oder nur in Anwendungen mit geringen Qualitätsanforderungen eingesetzt, weil geeignete hochwertige Verwertungswege für solche sehr heterogen zusammengesetzte Körnungen mit hohem Feinanteil fehlen. Der Reststoff Mauerwerkbruch ist ein heterogenes SiO2-reiches Gemisch aus Ziegel-, Beton- und Leichtbeton-, Kalksandstein- und Porenbetonbruch sowie Putz- und Mörtelanhaftungen. Die uneinheitliche Zusammensetzung und mehr als 50 % Feinanteile durch die mechanische Aufbereitung verhindern eine unmittelbare Wiederverwertung als rezyklierte Gesteinskörnung. Eine Möglichkeit der effektiven Verwertung von Mauerwerkbruch stellt das rohstoffliche Recycling über einen hydrothermalen Stoffumwandlungsprozess dar, bei dem poröse Granulate entstehen. Aus den Eigenschaften der Hydrothermalgranulate, insbesondere ihrer Porenstruktur, ergeben sich Anwendungsmöglichkeiten als Filter- oder Speichermaterial, d. h. auch in Bereichen, die über den Bausektor hinausgehen. Hierbei können die Granulate Gesteinskörnungen natürlichen Ursprungs, z. B. Lavasand und Bims, oder aus natürlichen Rohstoffen hergestellte Körnungen, z. B. Blähtone, ersetzen. Somit wird ein Beitrag zur Schonung natürlicher Ressourcen und zur Energieeinsparung im Vergleich zur Blähtonherstellung geleistet.
Ziel des ZIM-Kooperationsprojekts „HYTEGRA – Hydrothermalgranulate“ war die Entwicklung des Verfahrens zur Herstellung leichter Gesteinskörnungen durch die hydrothermale Behandlung eines Gemischs quarz- und kalkreicher Reststoffe. Als Ausgangsstoffe dienten ziegelhaltiger Mauerwerkbruch als SiO2-Träger und Papierasche aus dem Altpapierrecycling als CaO-Träger. Die vollständige Prozesskette von der mechanisch-physikalischen Aufbereitung der Reststoffe über die Formgebung der Grüngranulate bis zur hydrothermalen Härtung der Leichtgranulate wurde im Labormaßstab entwickelt und erprobt. Die Anwendung der Hydrothermalgranulate als Speichermaterial zur inneren Nachbehandlung von Beton und als Pflanzsubstrat sowie als Filtermaterial in Bodenfiltern zur Abwasserbehandlung wurde untersucht.
Im Vortrag wird ein Überblick über die Ergebnisse des erfolgreich abgeschlossenen Projekts „HYTEGRA“ gegeben.
Basic oxygen furnace slag (BOFS) is a by-product of steelmaking of which about 10.4 Mt are produced annually in the EU. BOFS is mostly used in road construction, earthwork and hydraulic engineering. However, in this use, the iron bound in BOFS is lost and the opportunity to produce higher value products from BOFS is forgone.
In recent decades, many researchers have investigated a thermochemical process to reduce iron oxides to metallic iron in molten BOFS. The metallic iron formed separates from the reduced slag due to its higher density and can be recovered. An advantage of this process is that simultaneously the chemical composition of the reduced slag is adapted to that of the Portland cement clinker and the hydraulic reactive mineral alite is formed.
In this study, BOFS was reduced in a small-scale electric arc furnace using petrol coke as reducing agent, and the hydraulic properties of the reduced, low-iron BOFS were investigated. Despite a chemical and mineralogical composition similar to that of Portland cement clinker, the reduced BOFS produced less heat of hydration, and its reaction was delayed compared to Portland cement. However, the addition of gypsum, as is also done in cement production from Portland cement clinker, has been found to accelerate the hydration rate of reduced BOFS.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, the production of a hydraulic binder and crude iron from BOFS could have economic and ecological benefits for both the cement and steel industry.
Ziel des Projekts HYTEGRA ist die Herstellung leichter Gesteinskörnungen durch hydrothermale Behandlung quarz- und kalkreicher Reststoffe. Als Ausgangsstoffe dienen heterogener Mauerwerkbruch aus Bau- und Abbruchabfällen als SiO2-Träger und Papierasche aus dem Altpapierrecycling als CaO-Träger. Für beide Reststoffe besteht derzeit ein Verwertungsdefizit. Das Verfahren beruht auf der Idee des rohstofflichen Recyclings, d. h. die chemisch-mineralogischen Stoffeigenschaften werden für die hydrothermale Stoffumwandlung genutzt. Bei der Härtung der Hydrothermalgranulate bilden sich Calciumsilicathydrat-Phasen (CSH) aus der Reaktion zwischen Quarzpartikeln und Kalk im Autoklav bei 200 °C und 16 bar Sattdampf.