Circular Economy
Filtern
Dokumenttyp
- Vortrag (155)
Referierte Publikation
- nein (155)
Schlagworte
- Recycling (20)
- Phosphor (11)
- Phosphorrückgewinnung (11)
- Klärschlamm (10)
- Mauerwerkbruch (7)
- Phosphorus recovery (7)
- CFK (6)
- BOFS (5)
- Circular economy (5)
- Gichtgasschlamm (5)
- Hydraulic reactivity (5)
- Klärschlammverordnung (5)
- Kreislaufwirtschaft (5)
- Ressourceneffizienz (5)
- Ringversuch (5)
- Rohstoffliches Recycling (5)
- Sekundärrohstoffe (5)
- Ökodesign (5)
- Carbon Fibers (4)
- Dünger (4)
- Elektroofenstaub (4)
- Leaching (4)
- NIR (4)
- Poröse Granulate (4)
- Pyrometallurgy (4)
- Ressourcenrückgewinnung (4)
- Rostasche (4)
- Zink (4)
- BBodSchV (3)
- Bodenmaterial (3)
- Cabonfasern (3)
- Carbonfaser (3)
- Construction and demolition waste (3)
- Ecotoxicity (3)
- Electric Arc Furnace (3)
- Fertilizer (3)
- Gypsum (3)
- HP14 (3)
- Klärschlammasche (3)
- Makronährstoffe (3)
- Mantelverordnung (3)
- Normung (3)
- Nährstoffe (3)
- PAK (3)
- Papierasche (3)
- Phosphorus (3)
- Portland Cement (3)
- Pyrometallurgie (3)
- RFA (3)
- Recycling materials (3)
- Risk assessment (3)
- Robustness studies (3)
- Sewage sludge (3)
- Steelmaking (3)
- Verwertung (3)
- Zement (3)
- AbfKlärV (2)
- Additive manufacturing (2)
- Analytik (2)
- Ashdec (2)
- Baustoffrecycling (2)
- Bauxite Residue (2)
- CDW processing (2)
- Circular Economy (2)
- DED-Arc (2)
- DGT (2)
- Düngemittel (2)
- Ecodesign (2)
- Environmental evaluation (2)
- Flame retardancy (2)
- LD-Schlacke (2)
- Landwirtschaft (2)
- Laser-induced breakdown spectroscopy (2)
- Leichte Gesteinskörnung (2)
- Lichtbogenofen (2)
- Life Cycle Assessment (2)
- Lifetime (2)
- Lightweight aggregates (2)
- Lightweight concrete (2)
- Masonry rubble (2)
- Metrology (2)
- Mineralwolle (2)
- Monoverbrennungsanlage (2)
- Phopshorus recovery (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Red Mud (2)
- Reproduzierbarkeit (2)
- Scandium (2)
- Secondary Recources (2)
- Sensor (2)
- Sewage sludge ash (2)
- Sewage sludge ordinance (2)
- Tantal (2)
- Tantalum (2)
- Waste management (2)
- Zitronensäure (2)
- Abwasserbehandlung (1)
- Additiv (1)
- Advanced Materials (1)
- Alite (1)
- Alite hydraulic reactivity (1)
- Alkalien (1)
- Ammonium (1)
- Antimon (1)
- Arc welding (1)
- Assay (1)
- Aufgelöste Tragstrukturen (1)
- Auslaugverfahren (1)
- Automated welding (1)
- Bagasse (1)
- Bassanite (1)
- Bio-based (1)
- Bio-based concrete (1)
- Bio-composite (1)
- Bio-flame retardant (1)
- Bio-polymer (1)
- Biocomposite (1)
- Blast furnace sludge (1)
- Blended cements (1)
- Boden (1)
- Bottom ash (1)
- Brick clays (1)
- CDW recycling (1)
- CFRP (1)
- Calcined clays (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Carbide formation (1)
- Carbon feeding (1)
- Carbonation resistance (1)
- Carbonbeton (1)
- Carbonfasern (1)
- Cement (1)
- Cement and concrete (1)
- Chemical admixtures (1)
- Chromium (1)
- Cleavable probe (1)
- Clinker substitute (1)
- Combustion Ion Chromatography (1)
- Controlled release fertilisers (1)
- Copper (1)
- Corrosion (1)
- Corrosion products (1)
- Cr(III) complex (1)
- Culuative energy demand (1)
- Cyclodextrin (1)
- Denkmalpflege (1)
- Design of experiments (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Durability (1)
- Dye (1)
- EU-Recht (1)
- Effizienz (1)
- Electric arc furnace dust (1)
- Elutionsverhalten (1)
- Energiepolitik (1)
- Energieverbrauchskennzeichnung (1)
- Environment (1)
- Epoxy (1)
- Epoxy resin (1)
- Ermüdungsfestigkeit (1)
- Ersatzbaustoffe (1)
- Europa (1)
- Europäische Kommission (1)
- Extraktionsversuche (1)
- FIB/SEM (1)
- FITC (1)
- Fatigue life (1)
- Feedstock recycling (1)
- Fertigung (1)
- Filterstaub (1)
- Fire behaviour (1)
- Flame retardant (1)
- Flow Model (1)
- Fluorescence (1)
- Fusion welding (1)
- Gasturbines (1)
- Geothermal (1)
- Gesteinskörnungen (1)
- Gipsabfälle (1)
- Gipsrecycling (1)
- Gleichwertigkeit Messverfahren (1)
- Green Deal (1)
- Greenhouse gas balance (1)
- Grenzfläche als Material (1)
- Heavy metal removal (1)
- Holzschutz (1)
- Hydrogen (1)
- In-situ analysis (1)
- Incineration bottom ash (1)
- Industrielles Abwasser (1)
- Infraleichtbeton (1)
- Infrared spectroscopy (1)
- Insects (1)
- Internetplattform (1)
- Intumescence (1)
- Jacket foundations (1)
- Kenaf fiber (1)
- Klimaneutralität (1)
- Korrosion (1)
- Kumulierter Energieaufwand (1)
- Kunststoff (1)
- LIBS (1)
- Lanthanide (1)
- Laser-induced Breakdown Spectroscopy (1)
- Lebensmittelindustrie (1)
- Leichtbau (1)
- Leichtbeton (1)
- Leichte Gesteinskörnungen (1)
- Leichtgranulat (1)
- Life cycle assessment (1)
- Lightweighting (1)
- Lysimeter, Antimony (1)
- MIC (1)
- MSWI bottom ash (1)
- Maintenance (1)
- Marktüberwachung (1)
- Materialeffizienz (1)
- Materials flow (1)
- Medical diagnostics (1)
- Methanogen (1)
- Microbiologically influenced corrosion (1)
- Microplastics (1)
- Modelling (1)
- Monoverbrennung (1)
- Multiplexing (1)
- NDE (1)
- Nachhaltigheit (1)
- Nachhaltigkeit (1)
- Nanomaterialien (1)
- Nanoparticle (1)
- Nanosensor (1)
- Nassaufbereitung (1)
- Neuartige Materialien (1)
- Neutralammoniumcitrat (1)
- Neutralammoniumnitrat (1)
- Nitrate (1)
- Nuclear magnetic resonance (1)
- Nutrient (1)
- Offshore Wind energy (1)
- Offshore Windenergie (1)
- On-Line Analyse (1)
- Online-NMR-Spektroskopie (1)
- Online-RFA-Spektroskopie (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- Overhaul (1)
- Oxygen (1)
- P-Recyclate (1)
- P-Rückgewinnung (1)
- P-Senken (1)
- P-recovery (1)
- PAH (1)
- PLA (1)
- PLSR (1)
- Per- and Polyfluoroalkyl substances (PFAS) (1)
- Phosphorbestimmung (1)
- Phosphorylated algae (1)
- Phosphorylated lignin (1)
- Plasma (1)
- Plastikstrategie (1)
- Polymer (1)
- Polymer 3R (1)
- Polysaccharides (1)
- Predictability (1)
- Process control (1)
- Produkteffizienz (1)
- Prozessanalytik (1)
- Push-out Test (1)
- Pyrolyzed plant waste (1)
- Quantum dot (1)
- Raman spectroscopy (1)
- Ratiometric (1)
- Rechtssetzung (1)
- Recovery (1)
- Recycability (1)
- Recycling aggregates (1)
- Recycling-by-design (1)
- Reduction (1)
- Reduction process (1)
- Reference Material (1)
- Reference materials (1)
- Renewable (1)
- Renewable adjuvants (1)
- Renewable source (1)
- Repair (1)
- Repair mortar (1)
- Reparability (1)
- Ressortforschung (1)
- Ressourcen (1)
- Ressourcenschonung (1)
- Reststoffe (1)
- Rheology (1)
- Ringversuch P-Gehalt in Klärschlamm (1)
- Rotschlamm (1)
- Rückgewinnung (1)
- SLAMD app (1)
- SWIR (1)
- Scattering (1)
- Schlacke (1)
- Schweißen (1)
- Secondary building materials (1)
- Secondary resources (1)
- Selective chlorination (1)
- Sewage sludge incineration (1)
- Soil (1)
- Soil P species (1)
- Soil-like material (1)
- Soil-like materials (1)
- Sorting (1)
- Speichermaterial (1)
- Stahlwerksschlacke (1)
- Stalwerksschlacke (1)
- Steelmaking slag (1)
- Steinergänzungsmörtel (1)
- Stoffstromanalyse (1)
- Supplementary cementititous materials (1)
- Surface group analysis (1)
- Sustainability (1)
- TCE (1)
- TED-GC/MS (1)
- Technology-critical elements (1)
- Temperature (1)
- Thermally treated sludge (1)
- Thermische Abfallbehandlung (1)
- Thermochemisch (1)
- Thermochemische Prozesse (1)
- Time-gated Raman-Spektroskpie (1)
- Traceability (1)
- Tricalciumsilikat (1)
- Ultrasound (1)
- Uncertainty (1)
- Upscaling (1)
- Utilization (1)
- Versuchskampagne (1)
- Vitrimer (1)
- WUP (1)
- Waste water treatment (1)
- Wastewater flame retardants (1)
- Wiederholbarkeit (1)
- Wiederverwertung (1)
- X-ray absorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (1)
- XANES (1)
- Zementersatz (1)
- Zementklinker (1)
- Zinc (1)
- Zink phytate (1)
- Zinnschlacken (1)
- infrared spectroscopy (1)
- multi scale testing (1)
- pH (1)
- thermochemische Behandlung (1)
- Ökdoesign (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (112)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (89)
- 4.3 Schadstofftransfer und Umwelttechnologien (24)
- 7 Bauwerkssicherheit (24)
- 7.4 Baustofftechnologie (16)
- 1 Analytische Chemie; Referenzmaterialien (11)
- 7.1 Baustoffe (8)
- S Qualitätsinfrastruktur (8)
- S.3 Ökodesign und Energieverbrauchskennzeichnung (8)
- 1.4 Prozessanalytik (5)
Eingeladener Vortrag
- nein (155) (entfernen)
Revolutionizing our polymer industry for adaption to a sustainable carbon circular economy has become one of today’s most demanding challenges. Exploiting renewable resources to replace fossil-fuel—based plastics with biopolymers such as poly(lactic acid) (PLA) is inevitable while using waste streams as a raw material resource at least is promising. When it comes to using PLA as technical polymer, its high flammability must be addressed by flame retardants compatible with the thermoplastic processing of PLA and its compostability. This study proposes microalgae enriched with phosphorus from wastewater (P-Algae) as an elegant way towards a kind of sustainable organophosphorus flame retardant. The concept is demonstrated by investigating the processing, pyrolysis, flammability, and fire behavior of PLA/P-Algae, while varying the P-Algae content and comparing P-Algae with four alternative bio-fillers (phosphorylated lignin, biochar, thermally treated sewage sludge, and metal phytate) with different P-contents as meaningful benchmarks.
This study explores the acceleration of material design in the concrete industry, focusing on improving carbonation resistance, a key factor in the durability of concrete structures. Traditional tests for carbonation resistance are lengthy, but with the construction industry aiming for sustainable production, finding a balance between carbonation resistance and CO2 footprint is crucial. Our research employs two innovative methods: 1. Applying the Sequential Learning App for Materials Discovery (SLAMD), an AI materials design framework, to an extensive dataset of real-world concrete compositions to selectively test materials that meet market demands: maximum durability, optimal eco-durability, and the best cost-durability trade-off. 2. Investigating 1H Nuclear Magnetic Resonance (NMR) relaxometry as a quick alternative for characterizing carbonation behavior, as it saves time compared to traditional tests and assesses the complete material's pore space. Specific NMR features are then integrated into the material design model, with the model's performance compared against traditional approaches. The results of our study are compelling, demonstrating that materials can be precisely tailored to meet specific requirements with minimal data points. This marks a significant stride in the concrete industry, indicating that NMR-based, low-fidelity surrogate characterizations, combined with a focused, data-driven design approach, can substantially accelerate the development of durable, sustainable concrete mixtures.
Im Rahmen eines vom Umweltbundesamt geförderten Forschungsprojekts wurde untersucht, ob die Abtrennung der Feinfraktion (0-2 mm) eine Verbesserung der umweltrelevanten Eigenschaften bewirkt und somit HMVA-1 erreicht werden kann. In Deutschland wird die Rostasche durch Nassentschlackungssysteme aus dem Feuerraum ausgetragen. Durch den Kontakt mit Wasser setzen direkt hydraulische Reaktionen ein, die eine vollständige Abtrennung der Feinfraktion unmöglich machen. Das wurde bereits in den 1990er Jahren erkannt und führte zur Entwicklung des ABB InRec Verfahrens mit Trockenentaschung als ersten Verfahrensschritt. Auch damals war das Ziel eine möglichst inerte Rostasche für die Verwertung zu erzeugen. In den letzten Jahren wurden in der Schweiz Trockenentaschungssystem installiert, hier vor allem um die Rückgewinnung von elementaren Metallen auch in der Feinfraktion zu verbessern. Welche Potenziale sich dabei erschließen lassen, wurde in einem anderen UBA-Projekt untersucht. Im Rahmen unserer Arbeiten wurde versuchsweise trockene Rostasche an einer Anlage in Süddeutschland genommen und im Labor untersucht. Im Vortrag werden die Ergebnisse zum Auslaugverhalten und zur Gefahreneigenschaft HP14 (Ökotoxizität) vorgestellt.
Thermochemische Aufarbeitung von Stahlwerksstäuben und -schlämmen zur Zink- und Eisenrückgewinnung
(2024)
Stahlwerksstäube und -schlämme enthalten in der Regel Schwermetalle wie Zink, Blei und Cadmium, die ein direktes Recycling verhindern und diese Stoffe potenziell umweltgefährdend machen. Um diese Schwermetalle aus den Materialien zu entfernen, werden drei thermochemische Verfahren zur Aufarbeitung von Gichtgasschlamm, Elektroofenstaub und ähnlichen Stahlwerksstäuben vorgestellt. Zum einen kann die Mischung von Elektroofenstaub mit chloridhaltigen Lösungen, wie sie z. B. in der Titandioxidproduktion anfallen, gemischt werden, um bei der thermischen Behandlung Schwermetallchloride zu effektiv verdampfen. Weiterhin kann der im Gichtgasschlamm enthaltene Kohlenstoff genutzt werden, um in Mischungen aus Gichtgasschlamm und Elektroofenstaub bei der thermischen Behandlung als Reduktionsmittel zu wirken. Dieses Verfahren führt zur Rückgewinnung von Zink und metallischem Eisen und wird im Technikums- und Pilotmaßstab erprobt. Abschließend wird die Nutzung von Wasserstoff als Reduktionsmittel für Elektroofenstaub vorgestellt. Hierbei lässt sich der Reststoff potenziell klimaneutral in Eisenschwamm umwandeln, wobei die chemischen Grundlagen anhand von DTA-Experimenten und thermodynamischen Simulationen ergründet werden.
Nondestructive testing of gas turbine blades is essential for their maintenance and service process which is critical to ensure both safety and efficiency of these highly stressed parts. In this presentation, a novel ultrasonic testing method is explored in order to acquire part thickness information in the turbine blade’s airfoil. In established industry processes, the measurements are mainly carried out manually and only at a few specific positions of the inspected parts. The proposed method scans the part using a robot arm guiding an ultrasonic array sensor. For ultrasonic coupling to the complex-shaped surface geometry, the inspected part and sensor are immersed into water. A two-step TFM[1, 2] (Total Focusing Method) approach is used to reconstruct the outer and inner surfaces subsequently from the ultrasonic raw data, which are acquired using the FMC[3] (Full Matrix Capture) measurement principle. For each sensor position, the location and geometry of the outer surface is first identified and then used to create an image of an area inside the material. From that image, the inner surface is reconstructed. Finally, part thickness information is deducted from merging location data of inner and outer surface. The result is a high resolution, high precision mapping of the inspected part’s wall thickness.
Im Verbundprojekt R-Rhenania wird eine industrielle Demonstrationsanlage am Standort der Monoverbrennungsanlage Altenstadt der Firma Emter errichtet und im Jahr 2024 den Betrieb aufnehmen. Die vorhandene Rostfeuerung-Monoverbrennung wird so umgebaut, dass ein neues thermochemisches Verfahren integriert werden kann, welches hochwirksame und schadstoffarme Dünger produziert (bis zu 17.000 t/a). Die thermochemischen Produkte werden in Gefäß- und Feldversuchen im ökologischen Landbau auf ihre Düngewirkung getestet. Die Umweltverträglichkeit der Demonstrationsanlage wird untersucht, wie auch die Übertragbarkeit des Verfahrens auf weitere Regionen.
Offshore wind energy plays an important role for the desired transition towards a carbon dioxide free industry within the next decades. However, the grounding of the offshore wind plants governs the overall installation process besides bureaucratic bottlenecks.
The application of lightweight principles in steel construction, e.g. the usage dissolved load-bearing structures, so called Jackets foundations, offer great potential in reducing the resource consumption, especially with respect to the needed amount of steel.
In this context this paper focuses on a fully digitalization of the welding manufacturing and as well as testing chain to enable a fully automated manufacturing as well as quality assessment of tubular nodes as key element of Jackets foundation structures. Furthermore, the relationship between the seam shape geometry and resulting fatigue strength is evaluated by numerical methods incorporating bionic principles. It is shown that tubular nodes can be welded fully automatically taking geometry tolerances into account. Moreover, the seam shape could be manufactured as requested by the numerical models which offers great potential for an extended lifetime. Subsequently, the improvements in resource efficiency and reduction of carbon dioxide emissions are evaluated by a life-cycle-assessment.
In manufacturing, fusion welding processes use a lot of resources, which presents an opportunity to reduce environmental impact. While there is a general understanding of the environmental impact of these processes, it is difficult to quantitatively assess key parameters. This study introduces a welding-specific methodology that uses life cycle assessment (LCA) to evaluate the environmental impact of fusion welding technologies. Our approach analyses the main parameters that affect the environmental performance of different welding techniques, including traditional methods and additive manufacturing through the Direct Energy Deposition-Arc (DED-Arc) process. We integrate real-time resource usage data to offer an innovative framework for directly deriving environmental impacts. This research contributes to optimising welding processes by providing a precise and quantifiable measure of their ecological impact, facilitating the advancement of sustainable manufacturing practices.
Die Offshore-Windenergie spielt eine wichtige Rolle beim angestrebten Übergang zu einer emissionsfreien Industrie während der nächsten Jahrzehnte. Allerdings beeinflusst die Gründung der Offshore-Windanlagen den gesamten Installationsprozess. Die Anwendung von Leichtbauprinzipien im Stahlbau, wie beispielsweise die Verwendung von aufgelösten Tragstrukturen, sogenannten Jacket-Fundamenten, bietet ein großes Potenzial zur Reduzierung des Ressourcenverbrauchs, insbesondere im Hinblick auf die benötigte Stahlmenge. Der Vortrag befasst sich daher mit der vollständigen Digitalisierung der schweißtechnischen Fertigungs- und Prüfkette. Ziel ist es, eine vollautomatische Fertigung sowie Qualitätsprüfung von Rohrknoten zu ermöglichen. Diese stellen ein Schlüsselelement von Jacket-Fundamenten dar. Des Weiteren wird der Zusammenhang zwischen der Geometrie der Schweißnaht und der resultierenden Ermüdungsfestigkeit durch numerische Methoden unter Einbeziehung bionischer Prinzipien bewertet. Es wird gezeigt, dass rohrförmige Knoten unter Berücksichtigung von Geometrietoleranzen vollautomatisch geschweißt werden können. Die Schweißnahtform konnte gemäß den numerischen Modellen hergestellt werden, was ein großes Potenzial für eine verlängerte Lebensdauer bietet. Anschließend erfolgt eine Bewertung der Verbesserungen bei der Ressourceneffizienz und der Verringerung des CO2-Fußabdrucks durch ein Life Cycle Assessment.