Umwelt-Material-Interaktionen
Filtern
Erscheinungsjahr
- 2019 (3) (entfernen)
Dokumenttyp
- Posterpräsentation (3) (entfernen)
Sprache
- Englisch (3)
Referierte Publikation
- nein (3)
Schlagworte
- XRF (3) (entfernen)
Organisationseinheit der BAM
- 1 Analytische Chemie; Referenzmaterialien (3) (entfernen)
In addition to previously reported results on the accelerated weathering of polystyrene samples (PS) containing 1 wt.% hexabromocyclododecane (HBCD), we present the first results of our investigations of polypropylene samples (PP) containing 0.1 wt.% BDE-209. All studied polymer samples were exposed to a defined weathering schedule in a climate chamber in accordance to regulation EN ISO 4892-3:2006. For the determination of BDE-209 in the collected raining water the samples were prepared in accordance to a validated protocol. Before the analyses each sample was spiked with isotopically labeled BDE-209. Subsequently the samples were extracted with isooctane. The obtained extracts were concentrated, and the resulting solutions were analyzed by GC/MS. Additionally, the total bromine content was monitored for the weathered and untreated samples using laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and X-ray fluorescence analysis (XRF) as a non-destructive and rapid method. In general, the resulting data from the accelerated weathering will be compared to those from the natural weathering experiments. Here, the surfaces of the test pieces were analyzed by LA-ICP-MS and XRF as well. Moreover, soil bed tests were conducted in a well characterized model soil. This soil (boulder-clay, sand with 12 % loam, particle size in total 0.2-4 mm) is filled in a free-draining basin inside of an air-conditioned cellar. In this manner, TOC, water capacity and humidity are recorded parameters. To induce a leaching process from the samples by the raining water, the target water content is calculated to 8%. The actual humidity is measured by a tensiometer, assuring the duration of the raining period. A defined humidity is a fundamental parameter for a biological activity in the soil. The test polymers were placed up to the half in the soil. Microbial activity of the soil is monitored by a reference polymer (polyurethane) and should induce the release of HBCD and BDE-209 out of the test materials. These released analytes will be captured by passive samplers (silicone tubes) placed in a distinct distance to the polymer samples in the soil. The soil bed experiments are complementary to the weathering experiments due to the biological activity in the soil.
The need for sustainable and effective usage of limited resources like water and soil becomes more and more important due to increasing populations and their need for food. The research initiative BonaRes funded by the Federal Ministry of Education and Research, develops strategies to use soil as a sustainable resource for the bio-economy. One part of this initiative is the Intelligence for soil (I4S) project. It deals with the development of an integrated system for the site-specific soil fertility management. The goal of the project is to establish a mobile sensor platform for soil mapping as well as to apply soil and crop models to deal with the high amount of produced data. These models are going to be used to formulate recommendations on the use of fertilizers and to gain an improvement on the soil fertility. Using these information’s, the environmental pollution with substances like nitrate contained in fertilizers can be decreased. Furthermore, the costs for farmers can be decreased if only the amounts of fertilizer actually needed are applied to the field.
The task for the Federal Institute for Materials Research and Testing (BAM) is the installation and optimization of a handheld XRF sensor for the online measurement directly on the field. It is a non-destructive technique and quite suitable for the online approach due to a low maintenance in the sample preparation and a fast and simultaneous multi element analysis. The elements of interest in this case are light elements like phosphorus, calcium and potassium. One of the major tasks is the calibration of the sensor for different soils, therefore, calibration models are evolved to deal with different types of soil. Due to the multi element analysis, micro and macro nutrients can be determined simultaneously. Those differ a lot in their contents which makes it inevitable to optimize and adapt the measuring procedure. By analyzing soil, its always important to deal with matrix effects, that is why the influence of different disturbances like the moisturize content and the grain size needs to be investigated.
The XRF is only one of many sensors that combined give customized fertilizing recommendations in the end.
The need for sustainable and effective usage of limited resources like water and soil becomes more and more important due to increasing populations and their need for food. The research initiative BonaRes funded by the Federal Ministry of Education and Research, develops strategies to use soil as a sustainable resource for the bio-economy. One part of this initiative is the Intelligence for Soil (I4S) project. It deals with the development of an integrated system for the site-specific soil fertility management. The goal of the project is to establish a mobile sensor platform for soil mapping as well as to apply soil and crop models to deal with the high amount of produced data. These models are going to be used to formulate recommendations on the use of fertilizers and to gain an improvement on the soil fertility. Using this information, the environmental pollution with substances like nitrate contained in fertilizers can be decreased. Furthermore, the costs for farmers can be decreased if only the amounts of fertilizer needed are applied to the field.
The task for BAM is installation and optimization of a handheld XRF sensor for online measurement directly on the field. It is a non-destructive technique and quite suitable for an online approach due to a low maintenance in sample preparation and a fast and simultaneous multi element analysis. The elements of interest in this case are light elements like phosphorus, calcium, and potassium. One of the major tasks is the calibration of the sensor for different soils is finding suitable calibration models, which are evolved to deal with different types of soil. Due to the multi element analysis, micro and macro nutrients can be determined simultaneously. Those differ a lot in their contents, which makes it inevitable to optimize and adapt the analytical procedure. By analyzing soil it is always important to deal with matrix effects, that is why the influence of different disturbances like the moisturize content and the grain size needs to be investigated. The XRF is only one of many sensors that combined give customized fertilizing recommendations in the end.