Infrastruktur
Filtern
Erscheinungsjahr
- 2022 (305) (entfernen)
Dokumenttyp
- Vortrag (138)
- Zeitschriftenartikel (77)
- Beitrag zu einem Tagungsband (51)
- Posterpräsentation (15)
- Sonstiges (7)
- Buchkapitel (6)
- Forschungsbericht (5)
- Tagungsband (Herausgeberschaft für den kompletten Band) (2)
- Beitrag zu einem Sammelband (1)
- Dissertation (1)
Schlagworte
- Korrosion (20)
- Corrosion (19)
- Concrete (18)
- Ultrasound (13)
- Potentialfeldmessung (10)
- Structural health monitoring (10)
- Brandschutz (8)
- Brückenbeläge (8)
- Spannungsrisskorrosion (8)
- Distributed acoustic sensing (7)
- Geothermal (7)
- Ground vibration (7)
- Non-destructive testing (7)
- Reliability (7)
- Distributed fiber sensing (6)
- Feuerwiderstand (6)
- Monitoring (6)
- Spannstahl (6)
- Structural Health Monitoring (6)
- Ultrasonic (6)
- Bridge (5)
- Bridge monitoring (5)
- Coda wave interferometry (5)
- Embedded sensors (5)
- Fire test (5)
- Intumescent coating (5)
- Steel (5)
- Wasserstoff (5)
- Asphaltbauweise (4)
- Beton (4)
- Bridge Monitoring (4)
- Brücke (4)
- Civil engineering (4)
- Coda Wave Interferometry (4)
- Dauerhaftigkeit (4)
- Fahrbahnübergänge (4)
- Faseroptik (4)
- Fire tests (4)
- Flame retardancy (4)
- Hydrogen (4)
- I-OFDR (4)
- Schallemission (4)
- Synergy (4)
- Validation (4)
- 20L-sphere (3)
- Acoustic sensing (3)
- Aerial robot (3)
- Asphaltbauweisen (3)
- Assessment (3)
- Belastungsversuch (3)
- Brand (3)
- Brandversuch (3)
- Brandversuche (3)
- Building vibration (3)
- CO2 quality (3)
- Carbon (3)
- Cement (3)
- Damage detection (3)
- Dangerous goods packagings (3)
- Digitalisierung (3)
- Drop test (3)
- Energetic materials (3)
- Epoxy resin (3)
- Existing structures (3)
- Expandable graphite (3)
- Gefahrgutverpackungen (3)
- Großer Fallturm Horstwalde (3)
- Hybrid mixtures (3)
- Hydration (3)
- ISO 15630-3 (3)
- Mechanisch erzeugte Funken (3)
- Mechanischer Explosionsschutz (3)
- Modalanalyse (3)
- Nichtelektrische Funken (3)
- Nichtelektrischer Explosionsschutz (3)
- PmB Schweißbahn (3)
- Radar (3)
- Reaktive Brandschutzsysteme (3)
- Reaktives Brandschutzsystem (3)
- Reibfunken (3)
- Reverse Time Migration (3)
- Schlagfunken (3)
- Schleiffunken (3)
- Schwingungsdynamik (3)
- Spalling (3)
- Spannstahlbruch (3)
- Structural build-up (3)
- Structural dynamics (3)
- Superplasticizer (3)
- Synthetic Aperture Focusing Technique (3)
- Technische Anforderungen (3)
- Tension member (3)
- ADR (2)
- Abplatzen (2)
- Accelerated testing (2)
- Additive manufacturing of concrete (2)
- Alkali activation (2)
- Alkali-activated materials (2)
- Alterung (2)
- Angle of repose (2)
- Artificial intelligence (2)
- Aufprallfundament (2)
- Betonfahrbahndecke (2)
- Bingham fluid (2)
- Bio-composite (2)
- CCS (2)
- CLP-Verordnung (2)
- CO2 (2)
- Cement hydration (2)
- Coating (2)
- Coatings (2)
- Coda Wave Interferometry (CWI) (2)
- Combustion duration time (2)
- Concrete pavements (2)
- Corrugated fibreboard boxes (2)
- DFT (2)
- Digital twin (2)
- Doctoral School (2)
- Durability (2)
- Dynamic loads (2)
- Elastische Elemente (2)
- Energy dissipation (2)
- Erschütterungen (2)
- Evaluation (2)
- Existing Concrete Structures (2)
- Experimental approaches (2)
- Experimental tests (2)
- Explosion criterion (2)
- Explosion protection (2)
- Fallfundament (2)
- Fallprüfung (2)
- Fatigue (2)
- Finite Elemente Simulation (2)
- Finite element method (2)
- Fire resistance (2)
- Flame arrester (2)
- Flame retardant (2)
- Flammschutz (2)
- Flow properties (2)
- Flowability (2)
- Fotogrammetrie (2)
- Frequency analysis (2)
- Gas Tomography (2)
- Gas tomography (2)
- Gefahrgutverpackung (2)
- Gefahrstoff (2)
- Hausner ratio (2)
- Heterogeneity (2)
- Hybrid Mixtures (2)
- Ignition energy (2)
- Ignition source (2)
- Impact target (2)
- Inerting effect (2)
- Inspection (2)
- Inter-robot measurements (2)
- Internal water-repellent treatment (2)
- Irregularities (2)
- Kinetic data (2)
- LH2 (2)
- LIBS (2)
- LNG (2)
- Layered soil (2)
- Leakage detection (2)
- Load Experiment (2)
- Loam (2)
- Measurement (2)
- Measurement Uncertainty (2)
- Measurement uncertainty (2)
- Microstructure (2)
- Model order reduction (2)
- Muon tomography (2)
- Non-Destructive Testing (2)
- Non-destrucive testing (2)
- Nondestructive testing (2)
- Ontology (2)
- Optimization workflow (2)
- PGD (2)
- Penetration test (2)
- Performance oriented concrete design (2)
- Pipeline network (2)
- Plume (2)
- Polyaniline (2)
- Polyaniniline (2)
- Polyphosphate (2)
- Powders (2)
- Prestressing Steels (2)
- Preventive measures (2)
- Process monitoring (2)
- Railways (2)
- Reconstruction (2)
- Reconstruction algorithm (2)
- Reference material (2)
- Reinforced concrete (2)
- Renewable (2)
- Research data management (2)
- Response characterization (2)
- Restraint (2)
- Rotation (2)
- Rubber (2)
- Salzbeton (2)
- Scattering (2)
- Self-ignition (2)
- Semi-technical tests (2)
- Sift-proofness (2)
- Silicate (2)
- Silicon dioxide (2)
- Simulation (2)
- Spannbeton (2)
- Spannbetonbauwerke (2)
- Spannbetonbrücke (2)
- Stahlbeton (2)
- Strain detection (2)
- Strukturmonitoring (2)
- Sustainable (2)
- TDLAS (2)
- Tank (2)
- Tendon duct (2)
- Test standard (2)
- Thermoanalytical methods (2)
- Thixotropy (2)
- Tomographic damage evaluation (2)
- Tunnel (2)
- Turning maneuvers (2)
- Ultrasonic Echo Technique (2)
- Variational Bayesian (2)
- Variational multiscale method (2)
- Vehicle-track interaction (2)
- Vibration (2)
- Wasserstoffversprödung (2)
- Wellenausbreitung in der Tiefe (2)
- Zinc (2)
- Zugglied (2)
- Zwang (2)
- 20 L-sphere (1)
- 6-C vibration signals (1)
- Ab initio simulation (1)
- Abwassersysteme (1)
- Accelerated test (1)
- Accidental release (1)
- Acetylene (1)
- Acid attack (1)
- Acid resistance (1)
- Acoustic Emission (1)
- Acoustic emission (1)
- Additive manufacturing (1)
- Adjuvants (1)
- Admixture (1)
- Aerosole (1)
- Air dispersion modeling (1)
- Alkali aktiviertes Material (1)
- Alkali silica reaction (1)
- Alkali-Kieselsäure-Reaktion (1)
- Alkali-activated mortars (1)
- Alkali-aktiviertes Material (1)
- Alkalisch aktivierte Bindemittel (1)
- Alkalische Aktivierung (1)
- Alternative Bindemittel (1)
- Ambient excitation (1)
- Angemessener Sicherheitsabstand (1)
- Anlagensicherheitsrecht (1)
- Anode (1)
- Arbeitsschutz (1)
- Assessment criteria (1)
- Asymptotic local approach (1)
- Atmosphere (1)
- Atmosphärische Korrosion (1)
- Attenuation (1)
- Aufgelöste Tragstrukturen (1)
- Auslagerungsversuche (1)
- Automatisierte Fertigung (1)
- Axle loads (1)
- Axle pulses (1)
- BAM’s safety philosophy (1)
- BOFDA (1)
- BOS (1)
- Background information on test approaches (1)
- Backscatter measurement (1)
- Bahngleis (1)
- Bauvorschriften (1)
- Bauwerksdiagnostik (1)
- Bauwerksmonitoring (1)
- Bauwerksüberwachung (1)
- Bayes factor (1)
- Bayesian identification (1)
- Bedarfserhebung (1)
- Befeuchtungsdauer (1)
- Belastungsfahrt (1)
- Belastungstest (1)
- Betonfahrbahndecken (1)
- Bio-flame retardant (1)
- Bio-polymer (1)
- Biocomposite (1)
- Bioeconomy (1)
- Biogenic (1)
- Biopolymerkomposite (1)
- Bis([dimethoxyphosphoryl]methyl) phenyl phosphate (1)
- Blast (1)
- Blended cement (1)
- Bodenfilter (1)
- Bodenschlitz (1)
- Bonded Materials (1)
- Braking in a turn manoeuvre (1)
- Branddetektion (1)
- Brandprüfungen (1)
- Brick clay (1)
- Bridges (1)
- Brillouin distributed fiber sensor (1)
- Brücken (1)
- Building envelope (1)
- Building facade (1)
- CCU (1)
- CFD (1)
- CO2/N2 ratio (1)
- Cable (1)
- Cable bundle (1)
- Cables in fire (1)
- Calcined clay (1)
- Carbon fibers (1)
- Carbonation (1)
- Cargo shifting (1)
- Cement matrix (1)
- Cement suspension (1)
- Chemikalienrecht (1)
- Chloride induced corrosion (1)
- Chloride‐induced corrosion (1)
- Circular economy (1)
- Coal dusts (1)
- Coda wave (1)
- Combined finite-element boundary-element method (1)
- Combustion kinetics (1)
- Compatibility (1)
- Competencies (1)
- Composites in fire (1)
- Concrete Carbonation (1)
- Concrete repair (1)
- Concrete spalling due to fire exposure (1)
- Concrete structures (1)
- Consequence limit (1)
- Constant Load Test (1)
- Continuous wavelet transform (1)
- Continuously inhomogeneous geological media (1)
- Copper (1)
- Corrosion costs (1)
- Corrosion inhibitor (1)
- Corrosion protection (1)
- Corrugated fibreboard box (1)
- Coupler systems (1)
- Crack depth (1)
- Crash simulation (1)
- Critical chloride content (1)
- Cross-correlation function (1)
- Curriculum (1)
- Cyclodextrin (1)
- DAS (1)
- Damage analysis (1)
- Damage detection systems (1)
- Damage indices (1)
- Datenmanagement (1)
- Decision theory (1)
- Dehnfugen (1)
- Dehnfugenkonstruktionen (1)
- Dehnungsdetektion (1)
- Density functional theory (1)
- Destructive testing (1)
- Deteriorating structures (1)
- Digital Twin (1)
- Dissolution (1)
- Distributed POF sensor (1)
- Distributed fiber optic sensing (1)
- Distributed sensing (1)
- Distributed strain sensing (1)
- Distributed temperature sensing (1)
- Domain decomposition (1)
- Domin decomposition (1)
- Dripping behavior (1)
- Durability assessment (1)
- Dust explosions (1)
- Dust sensor (1)
- Dynamic axle loads (1)
- Dynamische Bodensteifigkeit (1)
- E&E (1)
- EU Projekt ODYSSEUS (1)
- EVA (1)
- Early-age concrete (1)
- Effusivity (1)
- Einflussgrößen (1)
- Einflusslinien (1)
- Einfügungsdämmung (1)
- Einsatzkräfte (1)
- Elastomer (1)
- Elastomers (1)
- Elevated temperature (1)
- Embedded Sensors (1)
- Empirical mode decomposition (1)
- Empirical model (1)
- Energetic Materials (1)
- Entransy dissipation exremum principle (1)
- Entscheidungsfindung (1)
- Entzündbare Flüssigkeit (1)
- Ereignisse (1)
- Erschütterungen im Fernfeld (1)
- Erschütterungsminderung (1)
- Ethanol (1)
- Evaluation of test results (1)
- Expanded natural graphite (1)
- Experimental methods (1)
- Explicit transient simulation (1)
- Explosion (1)
- Explosion characteristics (1)
- Explosion products (1)
- Explosiv- und Ausgangsstoffe (1)
- FTIR-ATR Measurements (1)
- Fackeln (1)
- Fiber-optic vibration monitoring (1)
- Fibres (1)
- Fillers (1)
- Filter effects (1)
- Finite elements (1)
- Finite-element-analysis (1)
- Fire (1)
- Fire Behavior (1)
- Fire Science (1)
- Fire behavior (1)
- Fire behaviour (1)
- Fire behaviour of concretes (1)
- Fire protection (1)
- Fire safety (1)
- Fire simulation (1)
- Fire stability (1)
- Fireball (1)
- Flame retardants (1)
- Flame retarded composites (1)
- Flammschutz, Witterungsbeständigkeit, Langzeitbeständigkeit, UV, E&E (1)
- Flexible polyurethane foam (1)
- Forschungsbedarf (1)
- Foundation reliability analysis (1)
- Fundamente (1)
- Funkenarme Werkzeuge (1)
- Funkenfreie Werkzeuge (1)
- Fussballstadien (1)
- Fügetechnik (1)
- GHS (1)
- GNSS (1)
- Galvanized steel (1)
- Gas Distribution Mapping (1)
- Gas Source Localization (1)
- Gas explosions (1)
- Gebäudelagerung (1)
- Gefahrguttransport (1)
- Gefahrstoffe (1)
- Gel-bound Colorants (1)
- General Chemical Engineering (1)
- Geometric vehicle and track irregularities (1)
- Geophysics (1)
- Geopolymer (1)
- Geostatistics (1)
- Geotechnics (1)
- Global ambient vibrations (1)
- Goal-oriented (1)
- Gradient damage (1)
- Graphene (1)
- Großversuche (1)
- H2 (1)
- H2Safety@BAM (1)
- HMEs (1)
- Half-cell potential (1)
- Hammer impact (1)
- Hardly separable problem (1)
- Hausner-Faktor (1)
- Health monitoring (1)
- High temperature behaviour of concretes (1)
- High-performance concrete (1)
- High-speed (1)
- Historische Gebäude (1)
- Home made explosives (1)
- Home-Made-Explosives (1)
- Hot disc method (1)
- Hunting phenomenon (1)
- Hybrid cements (1)
- Hybrid mixture (1)
- Hydrogen-induced Stress Corrosion Cracking (1)
- Illite (1)
- Impact (1)
- Impact damage of reinforced concrete (1)
- Impact damage on reinforced concrete (1)
- Impedanzmethode (1)
- Impurities (1)
- Infrastructure monitoring (1)
- Inhibitor (1)
- InnoBOSK (1)
- Insects (1)
- Instandsetzung (1)
- Insulation (1)
- Intumescent additives (1)
- Iron dust (1)
- Iron oxides (1)
- Jacket-Gründungsstrukturen (1)
- KAS (1)
- KAS-18 (1)
- KTE (1)
- Kalzinierte Tone (1)
- Kenaf fiber (1)
- Kinetics (1)
- Kommunale Infrastruktur (1)
- Korrosionsprüfung (1)
- Korrosionsschutz (1)
- Kraft auf den Boden (1)
- Kullback-Leibner divergence (1)
- Kulturgut (1)
- Körpermodell (1)
- LBM-DEM (1)
- Lagerung (1)
- Langzeitbeständigkeit (1)
- Large-scale tests (1)
- Lateral load transfer (1)
- Leather (1)
- Lebensdauervorhersage (1)
- Leichtbau (1)
- Leichte Gesteinskörnung (1)
- Leitfaden (1)
- Lightweight constructions (1)
- Limiting oxygen concentration (1)
- Liquid cargo (1)
- Load rating (1)
- Load tests (1)
- Localization (1)
- Lochkorrosion (1)
- Low-cost (1)
- Lower explosion limit (1)
- MEC (1)
- MIC (1)
- Markthochlauf (1)
- Maschinenbetrieb (1)
- Material design (1)
- Mauerwerkbruch (1)
- Mchanische Sicherheitsprüfung (1)
- Mechanical Load (1)
- Mechanical Properties (1)
- Mechanical Sensitivity (1)
- Mechanical modelling (1)
- Mechanische Sicherheitsprüfung (1)
- Mechanisms for the spalling phenomenon (1)
- Mechanochemistry (1)
- Messunsicherheit (1)
- Metal hydride reactor (1)
- Micromechanical simulation (1)
- Minderungsmaßnahmen (1)
- Mitigation strategies (1)
- Mobile Robot Olfaction (1)
- Modal analysis (1)
- Model calibration (1)
- Model identification (1)
- Model oder reduction (1)
- Model update (1)
- Model updating (1)
- Modell-Update (1)
- Modellierung (1)
- Modelling and simulation (1)
- Modes (1)
- Modes and waves (1)
- Moisture (1)
- Monitoring Endlager (1)
- Monopile installation risks (1)
- Mortar (1)
- Multi-beam track model (1)
- Multidisciplinary (1)
- Multilayer bed (1)
- Multilayer graphene (1)
- Multiscale methodes (1)
- Multiscale methods (1)
- NDT (1)
- NDT-CE (1)
- NMR-Relaxometrie (1)
- Nachgiebigkeiten (1)
- Nachhaltigkeit (1)
- Nachrechnung (1)
- Nachwachsende Rohstoffe (1)
- Nanocomposite (1)
- Nanocomposites (1)
- Nanoparticles (1)
- Nelson’s method (1)
- Nichtrostende Stähle (1)
- Non destructive testing and evaluation (1)
- Normalized-Input-Output-Minimization (1)
- Numerical analysis (1)
- Numerical damage simulation (1)
- Numerical simulation of impact damage (1)
- OFDR (1)
- OTDR (1)
- Offshore Windenergie (1)
- Offshore geotechnics (1)
- Offshore wind energy (1)
- Onsite inspection (1)
- Ontologien (1)
- Open innovation testbed (1)
- Optical fiber sensor (1)
- Optical fiber sensors (1)
- Oxygen compatibility (1)
- Oxygen rich (1)
- PF-POF (1)
- POF (1)
- Papierasche (1)
- Parallelseismik (1)
- Parker method (1)
- Particle finite element method (1)
- Passive Smart Dust (1)
- Passive sensor interface (1)
- Perfectly Matched Layer (PML) (1)
- Perfluorinated polymer optical fiber (PF-POF) (1)
- Permeationsmessung (1)
- Pfahlgründung (1)
- Pfahlnachgiebigkeiten (1)
- Phase unwrapping (1)
- Phosphorous flame retardants (1)
- Phosphorus flame retardant (1)
- Phosphorus-containing flame retardant (1)
- Photothermal (1)
- Pile retrofit system (1)
- Pilot building (1)
- Pipeline (1)
- Polizei (1)
- Polysaccharides (1)
- Polyurethane foam (1)
- Polyurethane foams (1)
- Population density (1)
- Pore solutions (1)
- Portland clinker (1)
- Post-injection pressure drop (1)
- Potato starch (1)
- Potential mapping (1)
- Pre-ignition pressure rise (1)
- Precast concrete (1)
- Precurser (1)
- Prediction (1)
- Pressure Cylinders (1)
- Pressure Sensitive Adhesives (1)
- Pressure recepacles (1)
- Pressure rise rate (1)
- Pressure wave (1)
- Prestressed bridge (1)
- Prestressing Force (1)
- Prestressing force (1)
- Preventive strategies (1)
- Primäres Explosionstrauma (1)
- Probabilistic modelling (1)
- Probability of damage indication (1)
- Probability of detection (1)
- Propagation from a tunnel (1)
- Proper generalized decomposition (1)
- Provenancing (1)
- Prüfanweisung (1)
- Prüfnorm (1)
- Prüfverfahren AL Sp-Beton (1)
- Pulse-echo method (1)
- Pulse-echo technique (1)
- Pulver (1)
- Pyrolyzed plant waste (1)
- Pyrotechnik (1)
- Qualitätssicherung (1)
- Querkraftnachweis (1)
- RASEM (1)
- RFID (1)
- Rail damage (1)
- Rail damage (1)
- Rail roughness (1)
- Rail vibrations (1)
- Railroad (1)
- Railway trafiic (1)
- Random dynamics and vibrations (1)
- Random field (1)
- Randomly heterogeneous soil (1)
- Rayleigh backscatter measurement (1)
- Reactive fire protection system (1)
- Realkalisierung (1)
- Recommendations (1)
- Reference data (1)
- Reinforced Concrete (1)
- Reinforced Concrete Structures (1)
- Reinforcement (1)
- Renewable adjuvants (1)
- Renewable source (1)
- Reparatursysteme (1)
- Residue design (1)
- Response surface methods (1)
- Retardation (1)
- Reyleigh-Rückstreumessung (1)
- Rheological (1)
- Rheological properties (1)
- Rheology (1)
- Ringversuch (1)
- Risikosteuerung (1)
- Risk control (1)
- Road pavement (1)
- Rohstoffliches Recycling (1)
- Round robin test (1)
- SAFT (1)
- Safety (1)
- Safety characteristics (1)
- Schadensüberwachung (1)
- Schienenfahrweg (1)
- Schienenfahrwege (1)
- Schweißen (1)
- Schwingungsmonitoring (1)
- Schüttwinkel (1)
- Screening-tests (1)
- Seal Waste Safe (1)
- Seismic load (1)
- Sensitivity vectors (1)
- Sensor (1)
- Sensor network (1)
- Sensornetzwerk (1)
- Seveso-Richtlinie (1)
- Simple and fast prediction (1)
- Simple prediction (1)
- Simulating (1)
- Simulation Models (1)
- Size effect (1)
- Slope stability (1)
- Sloshing (1)
- Smart geosynthetics (1)
- Smart structures (1)
- Smoke suppression (1)
- Soil-building interaction (1)
- Soil-wall-floor model (1)
- Spaltzugfestigkeit (1)
- Spatially varying ground conditions (1)
- Sr isotopes (1)
- Stability (1)
- Stahl (1)
- Stahlbau (1)
- Stahlzugglieder (1)
- Stainless Steel (1)
- Stainless steel (1)
- Static axle loads (1)
- Statistical tests (1)
- Steel corrosion (1)
- Steel tension member (1)
- Stiffness variation (1)
- Stochastische Subspacebasierte Schadensdetektion (1)
- Strain measurement (1)
- Stray current (1)
- Stress Corrosion Cracking (1)
- Stress Cracking (1)
- Stress stiffening (1)
- Structural health monitoring. (1)
- Structural system identification (1)
- Structure health monitoring (1)
- Strätlingite (1)
- Studie (1)
- Störfallverordnung (1)
- Störfälle (1)
- Substructure failures (1)
- Subway (1)
- Sulfide oxidation (1)
- Superplasticizers (1)
- Surface line (1)
- Systemidentifikation (1)
- TRGS (1)
- Tannic acid (1)
- Tapes (1)
- Tausalzeintrag (1)
- Technische Regeln Gefahrstoffe (1)
- Temperature Correction (1)
- Temperature correction (1)
- Tension members (1)
- Terroranschläge (1)
- Test bench (1)
- Test rig (1)
- Testgelände (1)
- Testing for potential AAR (1)
- Testing for potential alkali-aggregate reaction (1)
- Testing methods (1)
- Textile reinforced concrete (1)
- Texture analyzer (1)
- Thermal Gravimetric Analysis (1)
- Thermal conductivity (1)
- Thermal diffusivity (1)
- Thermal effusivity (1)
- Thermochemical heat storage (1)
- Thermodynamic modelling (1)
- Thermography (1)
- Thermoplastic Polyurethane (1)
- Tomography (1)
- Track damage quantification (1)
- Track filtering (1)
- Trail detection (1)
- Trail following (1)
- Train passage (1)
- Train-induced ground vibration (1)
- Transfer function (1)
- Transmissibility function (1)
- Transport safety (1)
- Trial Following (1)
- Tunable Diode Laser Absorption Spectroscopy (TDLAS) (1)
- Tunnel line (1)
- Tunnel-pile transfer (1)
- Turbulent combustion (1)
- UAS (1)
- UN-Kennzeichen (1)
- UV (1)
- Ultraschall-Echo-Verfahren (1)
- Ultrasonic Velocity (1)
- Ultrasonic velocity (1)
- Unbounded domain (1)
- Uncertainty quantification (1)
- University (1)
- Value of information (1)
- Variational inference (1)
- Varying soil stiffness (1)
- Varying stiffness (1)
- Varying track stiffness (1)
- Verbund (1)
- Verfahrenspräzision (1)
- Verfügbarkeit (1)
- Verteilte akustische Sensorik (1)
- Verteilte faseroptische Sensorik (1)
- Vibration measurement (1)
- Vibration modes (1)
- Viscosity modifying agents (1)
- Vitrimer (1)
- WS-COTDR (1)
- Wave propagation (1)
- Waves (1)
- Weathering (1)
- Werkstoffe (1)
- Wheelset (1)
- Whole-chain CCS scenario (1)
- Wiedernutzung (1)
- Windenergieanlagen (1)
- Witterungsbeständigkeit (1)
- Working mechanism (1)
- X-ray diffraction (1)
- XANES (1)
- Zement (1)
- Zerstörungsfreie Prüfung (1)
- Ziegelton (1)
- Zivile Sicherheitsforschung (1)
- Zulassung (1)
- Zuverlässigkeitsbewertung (1)
- Zündgefahrenbewertung (1)
- layered soil (1)
- melamine (1)
- pH Indicator (1)
- phosphorous flame retardant (1)
- technische und technologische Anforderungen (1)
- zerstörungsfreie Prüfung ZfP (1)
- Überwachung (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (180)
- 8 Zerstörungsfreie Prüfung (84)
- 8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen (54)
- 7.6 Korrosion und Korrosionsschutz (45)
- 7.2 Ingenieurbau (39)
- 2 Prozess- und Anlagensicherheit (36)
- 2.1 Sicherheit von Energieträgern (25)
- 3 Gefahrgutumschließungen; Energiespeicher (24)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (24)
- 7.1 Baustoffe (23)
Paper des Monats
- ja (7)
Eingeladener Vortrag
- nein (138)
There is no applicable existing standard for the determination of safety characteristics for hybrid mixtures. While developing a new standard in a joint research project in Germany first results from parameter studies led to a standard procedure that can be adopted by laboratories that are already testing dusts in the so called 20L-sphere with as little additional effort as necessary. In fact, one of the main objectives of this research project was to keep modifications and adjustments from the generally accepted dust testing procedures as easy and minimal as possible so as to limit potential deviations from one laboratory to another.
In this first round robin test on hybrid mixtures ever, with methane as gas component and a specific corn starch as dust sample, the practicality of the whole procedure, the scattering of the results and the deviation between the testing apparatuses is investigated. This paper summarizes the experimental procedure adopted and objectives of the first round-robin phase involving three of the four original German companies, plus volunteering laboratories from Australia, Belgium, Czech Republic, France, Poland and P.R. China. The results will have an impact on the new standard and may lead to robust data for later simulation purposes.
The fire-induced spalling behaviour of concretes has a huge effect on the fire resistance of concrete components. Therefore, fire performance must be taken into account in the design and dimensioning of concrete structures. The use of new types of concrete and different types of cement or binder must also be considered. Despite decades of research, the mechanisms underlying the spalling phenomenon are not yet fully understood. However, knowledge about these mechanisms is the prerequisite for predicting the spalling behaviour as accurately as possible.
Experimental research from material characterisation on the micro scale up to full-sized fire tests as well as the simulation and modelling of fire-induced damage processes offer the opportunity to investigate the spalling behaviour of concrete. Thereby, a variety of influencing parameters must be regarded. Against this background, the effect of avoidance strategies can be evaluated.
Since 2009, the International Workshop on Concrete Spalling due to Fire Exposure (IWCS) offers a platform to get in touch with researchers and practitioners, exchange the latest research results and newly acquired data from real fire scenarios, and discuss current developments in the field of concrete spalling. After the successful workshops in Leipzig (Germany), Delft (Netherlands), Paris (France), Borås (Sweden) and Sheffield (United Kingdom), the 7th International Workshop IWCS took place in Berlin at BAM. It provided insights into the work of two RILEM Technical Committees. Based on this, various results of screening tests and large-scale tests for the assessment of the fire-induced spalling behaviour of concretes were presented, taking into account a large number of influencing parameters. Further topics of the workshop were the analysis of the mechanisms for the spalling phenomenon as well as the modelling and simulation of the spalling processes. A large part of the workshop was devoted to the high-temperature behaviour of various types of concrete.
The workshop was dedicated to Prof. Diederichs, who passed away on 20 January 2022. With his death, the spalling community lost an internationally renowned expert in the field of fire behaviour of concrete and reinforced concrete components. He played a decisive role in the design of all previous RILEM TCs on the high temperature and fire behaviour of concretes and reinforced concrete components.
The screening of coatings shows that the modification by adding individual pigment was not sufficient to protect carbon steel even during a short-term exposure, indicated by the discoloration after only seven days of exposure.
Electrochemical tests indicated that the coating cathodically protects carbon steel or slows down the corrosion reaction.
A long-term exposure test confirmed that the PANI/SiO2 modified coating successfully protects the carbon steel in the Sibayak artificial geothermal water at 150 °C for 6 months.
Corrosive geothermal brines are a major challenge to geothermal power-plants. For cost reasons, plant designers favorize low alloyed steels, e.g., carbon steel, which are susceptible to uniform and localized corrosion when exposed to geothermal brines having acidic and saline properties. To solve such problem, coatings or inhibitors would be a protective solution as an alternative to the use of high alloyed materials.
This study investigated a coating system consisting of polyaniline/silicon dioxide basing on locally available resources. Protection against corrosion of carbon steel is shown by long-term exposure and electrochemical tests of coated carbon steels, performed in an artificial acidic and saline geothermal brine, comparable to real conditions at a site in Indonesia.
Therefore, an integrated coating system is presented for corrosion protection, combining the electro-chemical functionality of polyaniline and the physical advantages of silica.
The critical chloride content C(crit) is an indicator for the corrosion resistance of reinforcing steels in concrete. In this article, several experimental methods for determining the critical chloride content C(crit) of mild and an alloyed (12% Cr) steel in cementitious materials are compared. The methods used include accelerated polarization tests and tests using more natural (unpolarized) conditions in which chloride ingress occurs by diffusion and capillary uptake. The advantages and disadvantages of the methods are discussed, in particular, with the objective of reaching a compromise between applicability to practice and feasibility in laboratory testing.
A systematic series of flexible polyurethane foams (FPUF) with different concentrations of flame retardants, bis([dimethoxyphosphoryl]methyl) phenyl phosphate (BDMPP), and melamine (MA) or expandable graphite (EG) was prepared. The mechanical properties of the FPUFs were evaluated by a universal testing machine. The pyrolysis behaviors and the evolved gas analysis were done by thermogravimetric analysis (TGA) and TGA coupled with Fourier-transform infrared (TG-FTIR), respectively. The fire behaviors were studied by limiting oxygen index (LOI), UL 94 test for horizontal burning of cellular materials (UL 94 HBF), and cone calorimeter measurement. Scanning electronic microscopy (SEM) was used to examine the cellular structure's morphology and the postfire char residue of the FPUFs. LOI and UL 94 HBF tests of all the flame retarded samples show improved flame retardancy. BDMPP plays an essential role in the gas phase because it significantly reduces the effective heat of combustion (EHC). This study highlights the synergistic effect caused by the combination of BDMPP and EG. The measured char yield from TGA is greater than the sum of individual effects. No dripping phenomenon occurs during burning for FPUF-BDMPP-EGs, as demonstrated by the result of the UL 94 HBF test. EG performs excellently on smoke suppression during burning, as evident in the result of the cone calorimeter test. MA reduces the peak heat release rate (pHRR) significantly. The synergistic effect of the combination of BDMPP and EG as well as MA offers an approach to enhance flame retardancy and smoke suppression.
Alkali-silica reaction (ASR) is a chemical reaction within concrete which can lead over time to cracking and spalling. Due to the complexity of the problem, it still causes damage to concrete constructions worldwide.
The publication aims to illustrate the interdisciplinary research of the German Federal Institute for Materials Research and Testing (BAM) within the last 20 years, considering all aspects of ASR topics from the macro to the micro level. First, methods for characterization and assessment of ASR risks and reaction products used at BAM are explained and classified in the international context. Subsequently the added value of the research approach by combining different, preferably nondestructive, methods across all scales is explained using specific examples from a variety of research projects. Aspects covered range from the development of new test-setups to assess aggregate reactivity, to analysis of microstructure and reaction products using microscopical, spectroscopical and X-ray methods, to the development of a testing methodology for existing concrete pavements including in-depth analysis of the visual damage indicator and the de-icing salt input using innovative testing techniques. Finally, research regarding a novel avoidance strategy that makes use of internal hydrophobization of the concrete mix is presented.
In dem Vortrag werden die Highlights und Ergebnisse des abgeschlossenen Wipano Forschungsprojekts "Spannstahlsicherheit" berichtet. In dem Vorhaben wurde das Projektziel ein neues Prüfverfahren für die Prüfung von Spannstählen auf Spannungsrisskorrosionsempfindlichkeit zu entwickeln erfolgreich abgeschossen. Weiterhin wurden neue Erkenntnisse zu den Ursachen der Ergebnisstreuung der bisherigen Prüfung gemäß ISO 15630-3 gewonnen. Das neue Prüfverfahren soll bei der nächsten Überarbeitungsrunde der ISO 15630-3 als Verfahren zunächst in den informativen Anhang aufgenommen werden.
Monitoring of construction projects plays increasingly important role in the implementation of growing needs and requirements, especially in geologically difficult areas. This particularly concerns tunnelling and special civil engineering projects. The use of fiber optic sensors for structural health monitoring provides significant economic advantages regarding lower life-cycle costs of the civil infrastructure. We present our achievements in the development of distributed polymer optical fiber sensors based on Rayleigh and Brillouin scattering for early damage detection.
Cementitious materials are frequently applied in environments in which they are exposed to acid attack, e.g., in sewer systems, biogas plants, and agricultural/food-related industries. Alkali-activated materials (AAMs) have repeatedly been shown to exhibit a remarkably high resistance against attack by organic and inorganic acids and, thus, are promising candidates for the construction and the repair of acid-exposed structures. However, the reaction mechanisms and processes affecting the acid resistance of AAMs have just recently begun to be understood in more detail. The present contribution synthesises these advances and outlines potentially fruitful avenues of research. The interaction between AAMs and acids proceeds in a multistep process wherein different aspects of deterioration extend to different depths, complicating the overall determination of acid resistance. Partly due to this indistinct definition of the ‘depth of corrosion’, the effects of the composition of AAMs on their acid resistance cannot be unambiguously identified to date. Important parallels exist between the deterioration of low-Ca AAMs and the weathering/corrosion of minerals and glasses (dissolution-reprecipitation mechanism). Additional research requirements relate to the deterioration mechanism of high-Ca AAMs; how the character of the corroded layer influences the rate of deterioration; the effects of shrinkage and the bond between AAMs and substrates.
In the recent years, more and more products in construction and automotive industry are bonded by adhesive tapes instead of mechanical fasteners but there is no sufficient understanding of how these bonded, layered materials behave in fires. Our research project gives an insight of how adhesives and substrates interact with each other in different fire scenarios and how flame retardants function in pressure sensitive adhesive (PSA) tapes. A systematic investigation on the burning behavior of PSA tapes as free-standing films, as top layers on different substrates and as sandwich-like adhesive joints was performed. The burning behavior of free-standing PSA tapes and those used as a coating was significantly improved by using phosphorus-based flame retardants. Furthermore, it was shown that, depending on tape structure and substrate, the PSA tape can lower the fire risk by acting as an intermediate protection layer in bonded materials.
minimum explosion concentration (MEC) and limiting oxygen concentration (LOC) in our recent works. This work further studies the reasonability and reliability of the alternative method experimentally and theoretically. Six different dust samples were tested via a 20-L spherical explosion chamber. The experimental results showed that the data of MEC and LOC determined by using the alternative and the standardized methods are in good agreement. The minimum flame propagation velocity (Sf) and the corresponding maximum combustion duration time (tc) were found at its MEC and LOC, suggesting that the theoretical analysis can well explain all the experimental data. It is the first time to study the theoretical basis of the explosion criterion, thus helping to improve our understandings of dust explosion characteristics, and to amend the explosion criterion in future test standards.
Das Ultraschall-Echo-Verfahren ist eine klassische zerstörungsfreie Prüftechnik zur Geometriebestimmung sowie Schadensanalyse von Betonkonstruktionen. Um die Abbildung der Ultraschalldaten von komplexen Betonstrukturen zu verbessern, haben wir die Reverse-Time Migration (RTM) aus der Seismik auf die zerstörungsfreie Prüfung im Bauwesen übertragen. In einer Vorstudie haben wir einen 2D akustischen RTM Code verwendet und an realen Ultraschalldaten, die an einer Betonfundamentplatte aufgenommen wurden, getestet. Im Vergleich mit dem herkömmlichen Rekonstruktionsalgorithmus für Ultraschalldaten, der Synthetic Aperture Focusing Technique (SAFT), zeigten die akustischen RTM-Ergebnisse eine deutliche Verbesserung in der Abbildung der inneren Struktur der Betonfundamentplatte. Vertikale Reflektoren konnten rekonstruiert werden, was mit dem herkömmlichen Abbildungsverfahren nicht möglich war. RTM ist, im Gegensatz zu SAFT, eine wellengleichungsbasierte Migrationsmethode und beruht auf der numerischen Lösung der vollständigen Wellengleichung. Die Vorteile sind, dass der Algorithmus sämtliche Informationen des Wellenfeldes verwendet und daher verschiedene Welleneffekte wie z.B. Multipathing berücksichtigt werden können. Die RTM bietet damit die Möglichkeit auch stark geneigte Reflektoren sowie Streukörper mit komplexen Geometrien darzustellen. Ein Nachteil ist jedoch die lange Rechenzeit und der hohe Bedarf an Speicherkapazität. Ein RTM-Algorithmus, der die elastische Wellengleichung anstatt der akustischen verwendet (wie in unserer Vorstudie angewandt), hat das Potenzial, die Abbildungsergebnisse noch weiter zu optimieren. Das liegt daran, dass unsere Ultraschallmessdaten durch Anregung elastischer Wellen generiert werden. In einem ersten Schritt haben wir zwei elastische 2D-RTM-Algorithmen an synthetischen Ultraschalldaten getestet. Diese wurden mit einem Betonmodell, bestehend aus mehreren Stufen und kreisförmigen Lufteinschlüssen, erzeugt. In einem zweiten Schritt wurden reale Ultraschalldaten mit Scherwellenprüfköpfen an einer Betonstufenplatte mit integrierten Hüllrohren aufgenommen. Die Auswertung der realen Daten mit unserem elastischen RTM-Code war ebenfalls erfolgreich. Wir konnten die Abbildungsqualität der Stufen und Hüllrohre im Vergleich zur akustischen RTM und SAFT verbessern.
To improve ultrasonic imaging of concrete structures, we transferred a seismic migration technique, the Reverse Time Migration (RTM), to non-destructive testing. A 2D elastic RTM algorithm was tested on synthetic ultrasonic echo data. Compared to the typically used synthetic aperture focusing technique (SAFT) as well as our acoustic RTM algorithm, the presented elastic RTM results show an enhancement in imaging vertical reflectors and complex features inside the 2D numerical concrete model.
The ultrasonic echo technique is widely used in non-destructive testing for investigation and damage analysis of concrete constructions. Important applications include thickness measurements, geometry determination, the localization and characterization of built-in components as well as the detection of quality issues (cracks, honeycombing, low concrete strength).
To improve ultrasonic data imaging of complicated structures in concrete, we transferred a seismic migration technique, the Reverse Time Migration (RTM), to non-destructive testing in civil engineering. In a preliminary study, we tested a 2D acoustic RTM algorithm on measured ultrasonic echo data acquired at a concrete foundation slab. Compared to the conventional used synthetic aperture focusing technique algorithms (SAFT) for ultrasonic data reconstruction, our acoustic RTM results showed a significant improvement in imaging the interior structure of the concrete slab. Vertical reflectors were reconstructed which was not possible by traditional imaging.
In contrast to SAFT, RTM is a wavefield-continuation method in time and uses the full wave equation. RTM is, thus, able to include multiple reflections and to handle multi-pathing as well as many other complex situations. As a drawback RTM requires extensive computing power and memory capacity. Nevertheless, due to progresses in parallel processing and other computational technologies RTM has become appealing for the application in the field of non-destructive testing.
An RTM algorithm, which uses the full elastic wave equation instead of the full acoustic one (as applied in our preliminary work) has the potential to optimize the imaging results even further. This is due to the fact, that our ultrasonic measurement data are generated by exciting elastic waves. Thus, in a first step, two 2D elastic RTM algorithms were tested on synthetic ultrasonic echo data generated with a concrete model consisting of several steps and circular shaped air inclusions. In addition, two imaging conditions were evaluated to reduce migration artifacts. Our synthetic elastic RTM results showed an enhancement in imaging the features inside the test model compared to acoustic RTM and SAFT. In a second step, we acquired ultrasonic measurement data at a concrete test specimen consisting of three steps and four air filled tendon ducts. The evaluation of the real data with our elastic RTM code was also successful and the reconstruction of the geometries of the steps and tendon ducts could be improved. With our study we have shown that elastic RTM is a step forward for ultrasonic testing in civil engineering.
Application of Intensity-Based Coherent Optical Time Domain Reflectometry to Bridge Monitoring
(2022)
Although distributed fiber sensing techniques have been widely used in structural health monitoring, the measurement results of bridge monitoring, particularly under destructive testing, have rarely been reported. To the best of our knowledge, this paper is the first report of distributed vibration measurement results, which we obtained during a three-day destructive test on an abolished bridge. A coherent optical time domain reflectometry (COTDR) was used to acquire the vibration information while the bridge was being sawed. The obtained signal was analyzed in time and frequency domain. Some characteristics of the sawing-induced vibration were retrieved by the short-time Fourier transform; the vibration exhibited several high frequency components within the measured range up to 20 kHz and all the components appeared in the same time slot. Some unexpected signals were also detected. Thorough analysis showed that they are quite different from the sawing-induced vibration and are believed to originate from internal damage to the bridge (probably the occurrence of cracks).
Each engineering decision is based on a number of more or less accurate information. In assessment of existing structures, additional relevant information collected with on-site inspections facilitate better decisions. However, observed data basically represents the physical characteristic of interest with an uncertainty. This uncertainty is a measure of the inspection quality and can be quantified by expressing the measurement uncertainty. The internationally accepted rules for calculating measurement uncertainty are well established and can be applied straightforwardly in many practical cases. Nevertheless, the calculations require the occasionally time-consuming development of an individually suitable measurement model. This contribution attempts to emphasize proposals for modelling the non-destructive depth measurement of tendons in concrete using the ultrasonic echo technique. The proposed model can serve as guideline for the determination of the quality of the measured information in future comparable inspection scenarios.
The general requirement, that nonmetallic materials for oxygen service must be tested and found suitable for their intended use in plants and components is the current state of technical safety. However, numerous requests of manufacturers, sales offices, and users show, that there is still a strong need for information on how these materials are tested and evaluated. Based on more than 60 years of expertise, this paper provides background information on BAM’s test approach. It explains why BAM applies additional assessment criteria on nonmetallic materials for certain use conditions. Hence, the test schedule as well as the final evaluation shall reflect the practical application in a more customer-related way in combination with a higher safety level. That is the demand of BAM’s safety philosophy.
Der diesjährige Beitrag zeigt den Einfluss ausgewählter Versuchsrandbedingungen auf das Abplatzverhalten von Normalbeton im kleinskaligen Brandversuch. Im Rahmen der Untersuchungen wurde die Abplatzneigung von acht zylindrischen Betonprüfkörpern der Maße Ø47 cm x 29 cm aus Normalbeton analysiert. Vier Prüfkörper wurden aus Normalbeton mit quarzitischer Gesteinskörnung hergestellt, wohingegen die grobe Gesteinskörnung (>2 mm) der anderen vier Prüfkörper durch Basaltsplitt ersetzt wurde. Neben der Art der groben Gesteinskörnung wurden zusätzlich ausgewählte Versuchsrandbedingungen variiert. Dies umfasste zum einen die Vorlagerung der Prüfkörper bei verschiedenen Umgebungsfeuchten und zum anderen die Ummantelung der Prüfkörper mit zwei Ringen aus Stahl bzw. einem durchgehenden Stahlblech. Die Ummantelung der Prüfkörper mit Stahlringen im Brandversuch führt zu einer Behinderung der thermischen Ausdehnung der Prüfkörper und zum Aufbau thermomechanischer Zwangsdruckspannungen. Diese Zwangsdruckspannungen werden maßgeblich von der thermischen Ausdehnung der verwendeten Gesteinskörnung beeinflusst. Zusätzlich wird die Feuchteabgabe über die Mantelfläche behindert. Der Einsatz des Stahlblechs reduziert lediglich die Abgabe der Feuchtigkeit über die Mantelfläche und induziert vernachlässigbare Zwangsdruckspannungen im Beton. Die Brandbeanspruchung der Prüfkörper erfolgte einseitig nach der Einheits-Temperaturzeitkurve (ETK) über einen Zeitraum von 60 Minuten. Mit Hilfe eines Laser Scanners wurden vergleichende 3D-Messungen der brandbeanspruchten Oberfläche vor und nach dem Brandversuch durchgeführt. Aus diesen Messungen konnten das Abplatzvolumen, die Abplatztiefenverteilung und die maximale Abplatztiefe ermittelt werden. Während des Brandversuchs wurde die Temperaturverteilung im Prüfkörper mittels fünf eingebetteter Mantelthermoelemente in verschiedenen Tiefen bestimmt. Die Ergebnisse zeigen, dass die Abplatzungen an der brandbeanspruchten Oberfläche infolge der Prüfkörperummantelung mit Stahlringen bzw. Stahlblech zunehmen. Bei einer Ummantelung mit Stahlringen mit gleichzeitiger Vortrocknung der Betonrandzone platzt der Prüfkörper mit quarzitischer Gesteinskörnung ab, wohingegen der Prüfkörper mit basaltischer Gesteinskörnung keine Abplatzungen aufweist. Dies wird auf die unterschiedliche Ausprägung der thermomechanischen Schädigung infolge der unterschiedlichen thermischen Ausdehnungskoeffizienten von Quarzkies und Basalt zurückgeführt.
Die Ergebnisse der Brandprüfserie zeigen, dass die Variation der Prüfrandbedingungen bei Beibehaltung der Prüfkörpergröße einen maßgeblichen Einfluss auf das Abplatzverhalten haben. Die Randbedingungen sind daher bei kleinskaligen Brandversuchen, die zukünftig als „Screening-Tests“ ersatzweise für kostenintensive Bauteilversuche verwendet werden sollen, zu berücksichtigen.
Um den Klimawandel wirksam zu bekämpfen, ist es entscheidend, fossile Brennstoffe durch erneuerbare Energiequellen wie Wind-, Solar- und Wasserkraft sowie alternative Energieträger, beispielsweise grünen Wasserstoff, zu ersetzen. Offshore-Windenergie spielt hierbei eine zentrale Rolle, da sie dank der Kombination aus globaler Verfügbarkeit, relativ geringen Betriebskosten und fortgeschrittenem technischen Entwicklungsstand besonders geeignet ist, zur regenerativen Stromerzeugung beizutragen. Sie ist zudem ein Schlüsselelement für die Umsetzung des Europäischen Green Deals, der das Ziel verfolgt, bis 2050 Klimaneutralität in der EU zu erreichen. Expertenschätzungen zufolge ist eine Steigerung der aktuellen Kapazität von 25 GW im Jahr 2020 auf etwa 450 GW notwendig, um diese ambitionierten Ziele zu erfüllen.
Bei der Entwicklung zukünftiger Offshore-Windparks, insbesondere in tieferen Gewässern, gewinnen Jacket-Gründungsstrukturen an Bedeutung. Diese Strukturen, die eine höhere Steifigkeit bei geringerem Materialeinsatz im Vergleich zu den bisher vorherrschenden Monopile-Gründungen bieten, basieren auf komplexen, räumlich aufgelösten Konstruktionen, die ähnlich den Öl- und Gasplattformen entwickelt werden. Die Herstellung der Jacketknoten, die bislang überwiegend manuell geschweißt wurden, birgt erhebliches Optimierungspotential. Durch Automatisierung und Digitalisierung der Fertigungsprozesse könnten nicht nur die Effizienz gesteigert, sondern auch die Qualität der Endprodukte durch präzise Überwachung und Kontrolle der Produktionsparameter verbessert werden. Diese technologischen Fortschritte sind für die Skalierung der Offshore-Windenergie und die Erreichung der Klimaziele von entscheidender Bedeutung.
Bei einer turnusmäßigen Inspektion der B1 Brücke am Altstädter Bahnhof in Brandenburg an der Havel wurden im Dezember 2019 Risse und Hohlstellen entlang der Längsträger festgestellt. Als Ursache wurde das Versagen eines signifikanten Anteils der Spanndrähte der konzentrierten Spannglieder vermutet. Die Brücke wurde umgehend für den Verkehr gesperrt und nach weiteren, umfassenden Untersuchungen im Mai 2021 abgebrochen.
Um die Sicherheit des unter der Brücke geführten Verkehrs zu gewährleisten, wurde die Brücke unter anderem mit einem Schallemissionsmesssystem überwacht. Mit diesem Verfahren ist es möglich, Spanndrahtbrüche zuverlässig zu detektieren und zu lokalisieren. In dem gut einjährigen Überwachungszeitraum wurden mehr als einhundert Spanndrahtbrüche detektiert, die in einigen Bereichen der Brücke besonders konzentriert auftraten.
Vor dem Abbruch der Brücke war es möglich, den Nachweis der Detektion von Spanndrahtbrüchen mit der Schallemissionsanalyse und ihre Ortungsgenauigkeit anhand von künstlich erzeugten Drahtbrüchen zu validieren. Weiterhin konnte das sichtbare Schadensbild, Längsrisse und Hohlstellen über den Spannkanälen, auf die lokale Schädigung der Spanndrähte zurückgeführt werden. Derzeit wird ein Merkblatt erarbeitet, in dem die Erfahrungen in der bisherigen Anwendung der Schallemissionsanalyse zum Monitoring von Spanndrahtbrüchen zusammengefasst werden.
In diesem Beitrag werden die Grundlagen der Schallemissionsanalyse und die Ergebnisse der Validierungsversuche an der Brücke in Brandenburg dargestellt. Weiterhin werden die Vorteile und Grenzen der Brückenüberwachung mittels Schallemissionsanalyse sowie Maßnahmen zur Sicherstellung der Qualität und der Zuverlässigkeit diskutiert.
Die Präsentation zeigt in Bild und Video die Möglichkeiten auf dem BAM TTS zur Durchführung von Versuchen unterschiedlicher Gefährlichkeitsstufen auf. Sie wendet sich an potentielle künftige Kooperationspartner aus dem Bereich der zivilen Sicherheitsforschung (Polizeibehörden, Feuerwehr, THW, andere Forschungseinrichtungen), um deren Forschungsbedarf mit den an der BAM vorhandenen Testmöglichkeiten abzugleichen und so ebenfalls dem Aufbau von überflüssigen konkurrierenden Parallelstrukturen an anderen Forschungseinrichtungen vorzubeugen.
Numerical models built as virtual-twins of a real structure (digital-twins) are considered the future ofmonitoring systems. Their setup requires the estimation of unknown parameters, which are not directly measurable. Stochastic model identification is then essential, which can be computationally costly and even unfeasible when it comes to real applications. Efficient surrogate models, such as reduced-order method, can be used to overcome this limitation and provide real time model identification. Since their numerical accuracy influences the identification process, the optimal surrogate not only has to be computationally efficient, but also accurate with respect to the identified parameters. This work aims at automatically controlling the Proper Generalized Decomposition (PGD) surrogate’s numerical accuracy for parameter identification. For this purpose, a sequence of Bayesian model identification problems, in which the surrogate’s accuracy is iteratively increased, is solved with a variational Bayesian inference procedure. The effect of the numerical accuracy on the resulting posteriors probability density functions is analyzed through two metrics, the Bayes Factor (BF) and a criterion based on the Kullback-Leibler (KL) divergence. The approach is demonstrated by a simple test example and by two structural problems. The latter aims to identify spatially distributed damage, modeled with a PGD surrogate extended for log-normal random fields, in two different structures: a truss with synthetic data and a small, reinforced bridge with real measurement data. For all examples, the evolution of the KL-based and BF criteria for increased accuracy is shown and their convergence indicates when model refinement no longer affects the identification results.
Beton ist weltweit einer der wichtigsten Konstruktionswerkstoffe und zeichnet sich durch eine enorme Anpassungsfähigkeit an sich verändernde Anforderungen aus. Damit verbunden ist eine hohe und kontinuierlich zunehmende Komplexität hinsichtlich der Ausgangsstoffe, Rezepturen und des Herstellungsprozesses. Folglich setzt eine Ausschöpfung des technischen und umweltbezogenen Potenzials der Betonbauweise höchste Expertise bei den Einzelakteuren der Bauindustrie voraus.
Bewertung der Innenhydrophobierung von Fahrbahndeckenbetonen als neuartige AKR-Vermeidungsstrategie
(2022)
Zur Nutzbarmachung grenzwertig alkaliempfindlicher Gesteinskörnungen für Betonfahrbahndecken wurde basierend auf einer Literaturrecherche die Eignung von je einem Innenhydrophobierungsmittel auf der Basis eines Kalziumstearats (HM-A), eines Silan-Siloxan-Gemisches (HM-B) sowie eines der Vertraulichkeit unterliegenden Wirkstoffs (HM-C) für die neuartige AKR-Vermeidungsstrategie untersucht. Die Basis für die Eignungsuntersuchungen bildeten die Rezepturen im ARS 04/2013 für den OB (D>8)/UB sowie für den OB 0/8. Zur Herausarbeitung des Einflusses des Hydrophobierungsmittels auf die schädigende AKR fand in der groben Kornfraktionen ein alkaliempfindlicher Grauwackesplitt Anwendung. Aufgrund der unterschiedlichen Wechselwirkung zwischen dem LP-Bildner und dem Hydrophobierungsmittel wurde seine Dosierung beim HM-A reduziert sowie beim HM-B geringfügig und beim HM-C um ein Vielfaches erhöht.
Ausgehend von den ausgewählten Rezepturen mit den unterschiedlichen Hydrophobierungsmitteln wurden bei den Untersuchungen u.a. folgende Erkenntnisse gewonnen:
• Nachweis der Funktionalität aller drei Hydrophobierungsmittel im Festbeton durch signifikant reduzierte kapillare Aufnahme der Prüflösung.
• Verschlechterung der mechanischen Eigenschaften und des Frost-Tausalzwiderstands des OB (D>8)/UB bei Zugabe aller Hydrophobierungsmittel.
• Verzicht auf den Einsatz des HM-A im OB (D>8)/UB aufgrund drastischer Verschlechterung der Verarbeitbarkeit des Frischbetons und hohem Festigkeitsverlust.
• Verzicht auf den Einsatz des HM-B im OB (D>8)/UB aufgrund der Überschreitung des Dehnungsgrenzwerts nach dem 9. bzw. 10. Zyklus (mit bzw. ohne zyklischer Vorschädigung) und der einhergehenden starken Abwitterung bei der KWL mit NaCl-Lösung.
• Nachweis nachhaltiger Verminderung schädigender AKR in beiden Betonarten mit HM-C in Klimawechsellagerung und 60°C-Betonversuch mit externer Alkalizufuhr, allerdings zu Lasten der mechanischen Eigenschaften und des Frost-Tausalz-Widerstands.
Fazit: Bei geeigneter Wirkstoffauswahl hat die Innenhydrophobierung das Potenzial für die Nutzbarmachung grenzwertiger Gesteinskörnung. Ihre Überführung in die Praxis erfordert jedoch eine weitere ganzheitliche Optimierung der Baustoffperformance. Das schließt auch die Verifizierung gezielter betontechnologischer Maßnahmen zur Verminderung der Verschlechterung der mechanischen Eigenschaften und des Frost-Tausalz-Widerstandes ein.
Im Rahmen des Forschungsprojektes IGF 20470N wurden Untersuchungen zum Alterungsverhalten von reaktiven Brandschutzsystemen (RBS) auf Stahlbauteilen durchgeführt. Mithilfe der Ergebnisse einer umfangreichen Literaturrecherche sowie experimentellen und numerischen Untersuchungen sollte ein Vorschlag für ein Prüfkonzept zum Nachweis einer Nutzungsdauer von RBS von mehr als 10 Jahren auf Basis von Kurzzeitversuchen abgeleitet werden. Dabei setzt die Bewertung des Alterungsverhaltens von RBS voraus, dass die Mechanismen der Alterung hinreichend bekannt sind.
Dafür wurden zunächst systematisch Daten von Kurz- und Langzeitversuchen von nationalen Zulassungsprüfungen der letzten Jahrzehnte ausgewertet. Anschließend wurden umfangreiche experimentelle Untersuchungen an einer wasserbasierten sowie einer epoxidharzbasierten Richtrezeptur durchgeführt. Da aus der Literatur bekannt ist, dass die Einflüsse der Bewitterung zu einer Veränderung der Konzentration der Bestandteile innerhalb der Beschichtung führen können, wurden Untersuchungen mit Mangelrezepturen durchgeführt, wobei systematisch einzelne Bestandteile reduziert wurden. Neben optischen Untersuchungen wurden thermoanalytische Verfahren (DSC-TG-, ATR-FTIR-, Elementar-, Farbanalyse) angewandt sowie Brandversuche an beschichteten Stahlplatten durchgeführt. Des Weiteren wurden die Richtrezepturen den beschleunigten Kurzzeitversuchen gemäß EAD 350402-00-1106 (2017) unterzogen, welche die Zulassung von Produkten auf europäischer Ebene regelt. Für die wasserbasierte Richtrezeptur wurden die Bewitterung für den feuchten Innenraum (Typ Z1) mehrfach wiederholt (1x, 3x, 6x). Für die epoxidharzbasierte Richtrezeptur entsprach die Bewitterung dem Zyklus für die Außenanwendung (Typ X). In Brandversuchen sowie thermoanalytischen und optischen Untersuchungen wurde das Alterungsverhalten sowie die thermische Schutzwirkung analysiert.
Anschließend wurden numerische Simulationen von Stahlbauteilen mit gealterten RBS durchgeführt und anhand der experimentellen Untersuchungen validiert. Mithilfe der numerischen Modelle kann eine Bewertung der thermischen Schutzwirkung von Stahlbauteilen mit gealterten RBS vorgenommen werden.
Mithilfe der gesammelten Erkenntnisse wurde ein Vorschlag für ein Prüfkonzept für den Nachweis einer Nutzungsdauer von mehr als 10 Jahren abgeleitet. Das Prüfkonzept besteht dabei aus einem Katalog von Möglichkeiten, die aktuellen Zulassungsprüfungen auf europäischer Ebene für eine Nutzungsdauer von 10 Jahren auf einen längeren Zeitraum zu erweitern.
Overview of the state of the art and current trends with the main topics:
- renewable sources in flame retardant polymers (flame retarded bio-polymers and biocomposites; bio-flame retardants, renewable adjuvants from industrial waste)
- flame retardancy meets sustainability
- concepts between analogy and out-of-the-box.
Renewable alternatives for common thermoset resins are demanded to go for sustainability. The objective is to create a flame retarded epoxy resin from a commercial bio epoxy resin with halogen free inorganic and organic flame retardants, respectively. Alumina trihydrate, aluminum diethyl phosphinate, a DOPO-based phosphonamidate and ammonium polyphosphate seem to have promising performances. Properties are enhanced with different bio fillers: pyrolyzed cocoa shells and plant waste (provided by Otto A. Müller Recycling GmbH, thanks!), short fibers and nonwovens of the natural fiber kenaf, hydroxypropyl-ß-cyclodextrin and sulfobutylether-ß-cyclodextrin.
Fire performance is investigated by cone calorimeter examinations, LOI and UL-94 ratings. Thermal analysis is given by TG-FTIR and DSC measurements.
Combinations of flame retardants and bio-fillers lead to reduced PHRR and THR, reach V0 in UL-94 and have a significant increase in LOI of up to 37 vol.-%. 10 % ammonium polyphosphate with 10 % pyrolyzed cocoa shell performs best, builds a magnificent protective layer, and shows good intumescence.
Brandschutz
(2022)
Brände zerstören immer wieder wichtige Kulturgüter und gefährden nationales Kulturerbe. Das Projekt BRAWA erarbeitet neue Strategien und innovative Technologien, um die Brandsicherheit historischer Gebäude zu erhöhen. Dabei basiert das Konzept auf der Vernetzung von Sensoren, die bereits beim Auftreten bestimmter Gase in der Frühphase der Brandentstehung Alarm auslösen. Durch ein neuartiges Helferkonzept soll eine frühe Branderkennung und -bekämpfung ermöglicht werden.
Der Beitrag stellt experimentelle Untersuchungen zum Feuerwiderstand von Carbonzuggliedern vor. Die Anwendung von Zuggliedern aus Carbon ist durch die außergewöhnlich gute Ermüdungs- sowie hohe Zugfestigkeit des Werkstoffs motiviert. Ferner ergibt sich gegenüber Stahl eine deutliche Reduzierung des Querschnitts. Perspektivisch sollen damit Stahlzugglieder im Netzwerkbogenbrückenbau ersetzt werden. Durch die Materialsubstitution werden Ressourcen nicht nur beim Zugglied selbst, sondern auch am Gesamttragwerk der Brücke eingespart. Da zum Tragverhalten von Carbonzuggliedern im Brandfall bislang keine Erkenntnisse vorliegen, sollen mit Hilfe von Bauteilbrandversuchen die Versagensmechanismen sowie die grundsätzliche Gleichwertigkeit gegenüber konventionellen Stahlhängern untersucht werden.
Der Beitrag beschreibt die Durchführung und die Ergebnisse von Brandversuchen an mechanisch belasteten Carbonzuggliedern. Die realmaßstäblichen Versuche werden am unikalen Zugbauteil-prüfofen der BAM im Mai 2022 durchgeführt. Das Versuchsprogramm umfasst vier Carbonzugglieder mit kreisrunden Querschnitten in zwei verschiedenen Durchmessern, ⌀36 mm und ⌀51 mm. Aus Gründen der Vergleichbarkeit erfolgt die Brandbeanspruchung nach Einheits-Temperaturzeitkurve (ETK). Während des Brandversuches wird die axiale Prüfkraft von 750 kN bzw. 1500 kN bis zum Eintreten des Probenversagens konstant gehalten. Zusätzlich werden die Längsverformung sowie die Bauteil- und Brandraumtemperaturen aufgezeichnet.
In einem Vorversuch an einem unbelasteten Bauteilabschnitt eines Carbonzuggliedes konnte das Brand- und Erwärmungsverhalten des Verbundmaterials untersucht werden. Dabei zeigten sich Makrorisse und eine Zersetzung der Kunststoffmatrix sowie eine hohe Temperaturbeständigkeit der Kohlenstofffasern. Durch das Fehlen der schützenden Matrix reagierten die Carbonfasern sensibel auf Querbeanspruchung. Dies führte zu einem Bruch und Ablösen der oberflächennahen Fasern.
Within a DFG-funded research group, we investigate the possibility of concrete damage assessment with coda waves. Coda wave interferometry (CWI) can be a valuable asset to structural health monitoring (SHM) as we can detect small signal changes and quantify them with the calculation of relative velocity changes. By equipping an in-service road bridge with more than 24 embedded ultrasonic transducers, we want to analyze how methods developed within the research group perform in an uncontrollable environment. We evaluate individual source-receiver combinations for detection of temporal changes as well as the entire installed sensor array to create maps of material change comparing two distinct states of the bridge.
We present our achievements in the development of distributed fiber optic sensing systems based on Brillouin optical frequency-domain analysis for structural health monitoring. The focus of the applications is on the gapless monitoring of geotechnical structures, large area infrastructures and electrical grids. The work includes the latest use of machine learning algorithms to reduce measurement time by coexistent increasing the measurement accuracy.
The current understanding of the carbonation and the prediction of the carbonation rate of alkali-activated concretes is complicated inter alia by the wide range of binder chemistries used and testing conditions adopted. To overcome some of the limitations of individual studies and to identify general correlations between mix design parameters and carbonation resistance, the RILEM TC 281-CCC ‘Carbonation of Concrete with Supplementary Cementitious Materials’ Working Group 6 compiled and analysed carbonation data for alkali-activated concretes and mortars from the literature. For comparison purposes, data for blended Portland cement-based concretes with a high percentage of SCMs (≥ 66% of the binder) were also included in the database. The analysis indicates that water/CaO ratio and water/binder ratio exert an influence on the carbonation resistance of alkali-activated concretes; however, these parameters are not good indicators of the carbonation resistance when considered individually. A better indicator of the carbonation resistance of alkali-activated concretes under conditions approximating natural carbonation appears to be their water/(CaO + MgOeq + Na2Oeq + K2Oeq) ratio, where the subscript ‘eq’ indicates an equivalent amount based on molar masses. Nevertheless, this ratio can serve as approximate indicator at best, as other parameters also affect the carbonation resistance of alkali-activated concretes. In addition, the analysis of the database points to peculiarities of accelerated tests using elevated CO2 concentrations for low-Ca alkali-activated concretes, indicating that even at the relatively modest concentration of 1% CO2, accelerated testing may lead to inaccurate predictions of the carbonation resistance under natural exposure conditions.
A prediction software has been developed by BAM. The following topics have still be solved. A realistic irregularity spectrum can be derived from axle-box measurements. It agrees wel with the spectrum used for the high-speed 2 project in the United Kingdom. In addition, the scattering of axle pulses should be included. This mid-frequency component can also be found in the HS2 procedure. Finally, the reduction in case of a tunnel line compared to a surface line should be included. Some measurement results of BAM, HS2 and other institutes show a certain mid-frequency reduction. This is due to the load distribution of the tunnel which yields softer axle pulses and the scattered axle impulses are reduced.
Nach einer kurzen Einführung in die Schallemissionsprüfung und -Analyse wird ein Versuchsstand vorgestellt, der im Rahmen des Themenfeldprojektes Seal Waste Safe installiert wurde. Schwerpunkt des Vortrages sind die Schallemissionsmessungen an einem 150 l Demonstrator aus Salzbeton und einem weiteren aus alkali-aktiviertem Material. Neben der konventionellen Schallemissionsanaylse mit Aktivitäts- und Intensitätsparametern der Zeitsignale, werden auch frequenzbasierte Parameter zur Analyse andiskutiert.
The structural build-up of fresh cement paste is often considered as a purely thixotropic phenomenon in literature even though cementitious materials undergo a non-reversible hydration process that can have an influence on the structuration process. In the current paper a method is proposed to validate the impact of the non-reversible structural build-up. It is shown that fresh cement paste samples lose their structural gain almost completely due to thixotropy while the structural build-up due to hydration can be observed but occurs in a significantly lower order of magnitude over the course of the first hours of hydration. In addition, it is shown, that the chemical component of the structural build-up accelerates with the onset of the acceleration period of hydration, while its contribution in the entire structural build-up remains constant.
Der Vortrag beleuchtet die Schnittstelle zwischen Chemikalienrecht und Störfallrecht. Der Hintergrund, die Struktur und wichtige Eckpunkte der CLP-Verordnung werden vorgestellt. Instrumente und Beispiele zur Verifizierung von Einstufungen nach CLP im Hinblick auf die Anwendung unter der Seveso-Richtlinie bzw. der Störfallverordnung werden erläutert. Außerdem werden mögliche Konsequenzen für Änderungen im Anwendungsbereich der Seveso-Richtlinie besprochen.