Infrastruktur
Filtern
Erscheinungsjahr
- 2022 (36) (entfernen)
Dokumenttyp
- Vortrag (16)
- Zeitschriftenartikel (15)
- Posterpräsentation (3)
- Beitrag zu einem Tagungsband (1)
- Forschungsbericht (1)
Schlagworte
- 20L-sphere (3)
- Hybrid mixtures (3)
- Mechanisch erzeugte Funken (3)
- Mechanischer Explosionsschutz (3)
- Nichtelektrische Funken (3)
- Nichtelektrischer Explosionsschutz (3)
- Reibfunken (3)
- Schlagfunken (3)
- Schleiffunken (3)
- CLP-Verordnung (2)
Organisationseinheit der BAM
- 2 Prozess- und Anlagensicherheit (36) (entfernen)
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (16)
minimum explosion concentration (MEC) and limiting oxygen concentration (LOC) in our recent works. This work further studies the reasonability and reliability of the alternative method experimentally and theoretically. Six different dust samples were tested via a 20-L spherical explosion chamber. The experimental results showed that the data of MEC and LOC determined by using the alternative and the standardized methods are in good agreement. The minimum flame propagation velocity (Sf) and the corresponding maximum combustion duration time (tc) were found at its MEC and LOC, suggesting that the theoretical analysis can well explain all the experimental data. It is the first time to study the theoretical basis of the explosion criterion, thus helping to improve our understandings of dust explosion characteristics, and to amend the explosion criterion in future test standards.
Major accidents in the process industry often lead to the release of light or dense gases, which can mean a thread to employees, local residents or to the environment. Possible scenarios are therefore analyzed and evaluated in advance for approval issues. There is a trend, where simple empirical models are being replaced with more complex numerical models. Gaussian dispersion models or models based on dimensional analysis approaches are for example, increasingly replaced by CFD simulations. The main reason for this is the potentially higher accuracy. However, usually scenarios using sharp parameter values are calculated, since comprehensive consideration of parameter distributions via Monte Carlo or Latin Hypercube Sampling fails due to the numerical effort. This includes the risk that the influence of uncertainties on the simulation results is not taken into account. Response surface methods offer an alternative, with which the CFD problem can be mapped onto an algebraic surrogate model. If this is sufficiently precise, parameter sampling can also be carried out with the surrogate as well, as shown in some publications. Previous investigations only demonstrated the basic principle using trivial dispersion models. In this paper two realistic CFD simulations from the plant safety area are considered: VOC emissions from a storage tank and near-ground dense gas emissions. The entire procedure of response surface determination and parameter studies was automated and parallelized for high-performance-computing, and is carried out on the underlying CFD grids. For the CFD simulations as well as for all visualizations, the commercial software ANSYS CFX and the open source software OpenFOAM were used. The aim of this paper is to demonstrate the method using industry-relevant applications as well as to show how this can be used in practical engineering applications. The quality of surrogate modeling, the numerical effort and advantages that can result from the procedure are discussed as well as advantages which may result from taking parameter uncertainties into account in safety studies.
There is no applicable existing standard for the determination of safety characteristics for hybrid mixtures. While developing a new standard in a joint research project in Germany first results from parameter studies led to a standard procedure that can be adopted by laboratories that are already testing dusts in the so called 20L-sphere with as little additional effort as necessary. In fact, one of the main objectives of this research project was to keep modifications and adjustments from the generally accepted dust testing procedures as easy and minimal as possible so as to limit potential deviations from one laboratory to another.
In this first round robin test on hybrid mixtures ever, with methane as gas component and a specific corn starch as dust sample, the practicality of the whole procedure, the scattering of the results and the deviation between the testing apparatuses is investigated. This paper summarizes the experimental procedure adopted and objectives of the first round-robin phase involving three of the four original German companies, plus volunteering laboratories from Australia, Belgium, Czech Republic, France, Poland and P.R. China. The results will have an impact on the new standard and may lead to robust data for later simulation purposes.
EU project ODYSSEUS - year 1
(2022)
Vorstellung EU-Projekt ODYSSEUS zum Thema Home-Made-Explosives sowie erste Ergebnisse bzgl. Rezepten, Ausgangsstoffen und Home-Made-Explosives in diesem Zusammenhang.
Der Vortrag stellt die wesentlichen Inhalte sowie die wichtigsten Änderungen der TRGS 510 "Lagerung von Gefahrstoffen in ortsbeweglichen Behältern" vor.
Die TRGS 510 zeichnet sich durch ein gestuftes Maßnahmenkonzept in Abhängigkeit von der Art und Menge der gelagerten Gefahrstoffe aus. Folgende Maßnahmenstufen werden durch die TRGS 510 beschrieben:
1. Kleinmengen -> Allgemeine Maßnahmen
2. Überschreitung der Kleinmengen -> Lagerung im Lager
3. Überschreitung bestimmter Mengen für spezielle Gefahrstoffe -> Spezielle Maßnahmen
4. Verschiedene Gefahrstoffe und Lagerung im Lager erforderlich -> ggf. Getrenntlagerung und Separatlagerung
Bei Geräten und Maschinen zur bestimmungsgemäßen Verwendung in explosionsgefährdeten Bereichen muss in der europäischen Union eine Zündgefahrenbewertung durchgeführt werden. Dabei müssen unter anderem die Gefahren von nichtelektrischen Zündquellen betrachtet werden, zu denen auch die mechanischen Schlagvorgänge gehören.
Bei Schlagvorgängen kommt es infolge des Zusammenstoßes zweier Werkstücke zu einer Umwandlung der kinetischen Energie. Dabei erhöht sich die Temperatur der Werkstoffe an der Kontaktstelle und es kommt unter Umständen zu einem Abtrennvorgang kleiner Partikel erhöhter Temperatur. Sowohl die heißen Kontaktstellen als auch die abgetrennten Partikel können eine wirksame Zündquelle für ein explosionsfähiges Gasgemisch darstellen. Zur Festlegung von Grenzwerten wurden in der Norm DIN EN ISO 80079-36:2016 die Gasgemische anhand ihrer Explosionsgruppe klassifiziert und zu jeder Gruppe die maximale Energie des Schlagvorgangs festgelegt, unter derer die Entstehung einer wirksamen Zündquelle als unwahrscheinlich angenommen werden kann.
Performance of the standardized testing method for detonation fl ame arresters at increased pressure
(2022)
Detonation flame arresters are typically used as autonomous protection systems in industrial applications to prevent potential hazards associated with flammable and/ or explosive chemicals. To verify and examine the suitability of detonation flame arresters, a testing method originating from the DIN EN ISO 16852 standard is used, which is mainly designed for atmospheric conditions.
In order to optimize the production capabilities, numerous industrial processes are taking place at pressures, temperatures, or oxygen concentrations beyond the ambient range, i.e. at non-atmospheric conditions and information on the performance of the regulated testing method are therefore required when the standard testing protocols are modified with regard to pressure, temperature or oxidizer.
The main objective of this study is to develop an improved testing method for detonation flame arresters, which offers a higher reproducibility and moreover, an applicability under non-atmospheric conditions. Therefore, an interlaboratory comparison on the performance of in-line flame arresters for stable and unstable detonations is jointly conducted by the project partners (PTB, BAM, Braunschweiger Flammenfilter GmbH and IBExU GmbH). The experiments are performed according to the testing method regulated in the DIN EN ISO 16852 standard for different pressures before ignition and different explosion groups. The experimental data is analyzed in detail to further optimize the test method and to thus achieve an improved reproducibility of detonation tests at high pressures, especially regarding the deflagration to detonation transition.
Potential ambiguities of the standardized testing method that might lead to the differing results at the different institutes are identified from the interlaboratory comparison and the test method is modified accordingly. Based on these results, an improved testing method for detonation flame arresters will be developed, which will ensure a greater safety at process plants while handling combustibles.