S.3 Ökodesign und Energieverbrauchskennzeichnung
Filtern
Erscheinungsjahr
- 2019 (22) (entfernen)
Dokumenttyp
- Vortrag (15)
- Zeitschriftenartikel (4)
- Beitrag zu einem Tagungsband (3)
Schlagworte
- Energy label (7)
- Heat pump (5)
- Ökodesign (5)
- Circular economy (4)
- Ressourceneffizienz (4)
- Coefficient of performance (3)
- Ecodesign (3)
- Dynamic Test Method (2)
- Energieeffizeinz (2)
- Energieeffizienz (2)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (15)
In this contribution, a dynamic test method to determine the seasonal performance of invertertype air conditioners has been developed and verified. In comparison to current test standards, where test modes for fixing the compressor speed are required, a dynamic approach is applied with unfixed compressor speed and thus better reflects the performance of air conditioners under real operating conditions. The dynamic tests are conducted in two calorimeter chambers. The indoor chamber is kept at a constant temperature whereas the outdoor chamber is subjected to a temperature profile based on the climate BIN-distribution, representing the reference cooling demand. The proposed dynamic test considers the dynamic control of an air conditioner and delivers results which could indicate the units’ performance in the field.
Cost analysis of screening methods to find non-compliant models using the example of tumble dryers
(2019)
The European energy label was established to reduce energy consumption in Europe. All classes and values on the energy label are stated by the supplier. The task of market surveillance is to ensure correct labels and to validate their values through compliance tests. However, this can only be done for a small fraction of all models on the market, since physical tests are expensive. Screening methods can be used to narrow down the number of critical products before compliance tests are done to decrease the costs of finding non-compliant models.
This study shows a mathematical approach to analyze the cost benefits of screening methods to find non-compliant models. Furthermore, the analysis presented has been applied to 18 screening methods for tumble dryers. The performance test for tumble dryers consists of seven test runs. All screening methods evaluated are composed of a reduced number of test runs. The most efficient screening method reduces the surveillance costs by 40 %.
Minimum energy performance standards and labels are commonly used tools to reduce the household energy use thus mitigating greenhouse gas emissions. However, the technical foundation for minimum energy performance standards and labels are test procedures for rating and testing of appliances. To de- termine the seasonal cooling performance of air conditioners, the current test standards require fixing of the compressor speed of the units to achieve steady-state conditions; this way of operation, how- ever, differs from real-life use. To make the seasonal cooling performance testing better reflect the real use conditions, this study proposes a compensation method which can be conducted independently from manufacturer data and still allows modulation of the tested units. Our results show that the tested units behave differently under part-load conditions, which results in a lower energy efficiency rating for some of the tested devices.
Resource efficiency is a much discussed topic in terms of improving
the sustainability of energy related and energy non-related
products. Resource efficiency aspects such as the availability
of spare parts, the ability to dismantle, etc. have been included
in draft working documents in the revision of several already
existing Ecodesign regulations as a first step. However, often
these aspects are not consistent with the current technology and
design of these products. A possible reason could be a lack of
sufficient consultation or of a methodology which is sufficiently
tailored for this topic. The established strategies and tools, used
by policymakers, such as the Methodology for the Ecodesign
of Energy-related Products (MEErP), do not seem to deal with
these aspects appropriately. Draft requirements need to be very
well developed before being discussed with member states and
other related stakeholders, because including resource efficiency
parameters could lead to additional, very wide-ranging effects
on society. This topic cannot be covered well with legislative
tools developed primarily for energy aspects. In this paper, a
method is presented which can be used to combine products’
properties with crucial resource efficiency indicators. The method
can be used to develop a set of draft legislative requirements
and to pre-evaluate these requirements by target groups which
would be affected by additional legal requirements. These include:
market surveillance authorities, standardization organizations,
manufacturers and their associations, environmental
organizations and research facilities. The method incorporates
stakeholders’ feedback to identify potential resource efficiency
measures for materials and/or products, their impact on the
European ecology, economy and society. Based on this it would
help to develop legislative requirements which are feasible and
desirable. The results can then be fed into the formal legislative
process, probably speeding it up.
Resource efficiency is a much discussed topic in terms of improving the sustainability of energy related and energy non-related products. Resource efficiency aspects such as the availability of spare parts, the ability to dismantle, etc. have been included in draft working documents in the revision of several already existing Ecodesign regulations as a first step. However, often these aspects are not consistent with the current technology and design of these products. A possible reason could be a lack of sufficient consultation or of a methodology which is sufficiently tailored for this topic. The established strategies and tools, used by policymakers, such as the Methodology for the Ecodesign of Energy-related Products (MEErP), do not seem to deal with these aspects appropriately. Draft requirements need to be very well developed before being discussed with member states and other related stakeholders, because including resource efficiency parameters could lead to additional, very wide-ranging effects on society. This topic cannot be covered well with legislative tools developed primarily for energy aspects. In this paper, a method is presented which can be used to combine products’ properties with crucial resource efficiency indicators. The method can be used to develop a set of draft legislative requirements and to pre-evaluate these requirements by target groups which would be affected by additional legal requirements. These include: market surveillance authorities, standardization organizations, manufacturers and their associations, environmental organizations and research facilities. The method incorporates stakeholders’ feedback to identify potential resource efficiency measures for materials and/or products, their impact on the European ecology, economy and society. Based on this it would help to develop legislative requirements which are feasible and desirable. The results can then be fed into the formal legislative process, probably speeding it up.
To determine the seasonal performance of heat pumps for energy labelling this study proposes a two-point-method that could conceivably be an alternative to the European standard EN 14825 and similar test standards such as ISO 13256. Heat pumps were tested in line with the EN 14825. The reduction of measurement points, from between five to seven (EN 14825) to only two (two-point-method), leads to 60 % savings in cost and time. It is shown that the shortened method can be used to determine the seasonal energy efficiency of heat pumps with the same degree of precision compared to EN 14825.
To determine the seasonal performance of heat pumps for energy labelling this study proposes a two-point-method that could conceivably be an alternative to the European standard EN 14825 and similar test standards such as ISO 13256. Heat pumps were tested in line with the EN 14825. The reduction of measurement points, from between five to seven (EN 14825) to only two (two-point-method), leads to 60 % savings in cost and time. It is shown that the shortened method can be used to determine the seasonal energy efficiency of heat pumps with the same degree of precision compared to EN 14825.
Die Kreislaufwirtschaftsinitiative der Europäischen Kommission fordert eine grundlegende Erweiterung bestehender Rechtsrahmen. Anforderungen zu einer gesetzlich vorgeschriebenen Lebensdauer, Reparierbarkeit, Recyclingfähigkeit, etc. von Produkten sollen unter der Ökodesign-Richtlinie geregelt werden. Bei diesem Vorhaben steht der Normungsauftrag M/543 im Zentrum. Es wurde 2015 von der Europäischen Kommission vergeben und bislang sind acht horizontale bzw. generische EN-Normen geplant. Trotz der zu erwartenden hohen Reichweite dieses Vorhabens scheinen die Inhalte und der eigentliche Zweck der zu erarbeitenden Normen vielen Marktakteuren noch nicht vollständig bekannt zu sein, daher sollen im Rahmen des Webinars diese Inhalte kurz vorgestellt werden.