8.2 Zerstörungsfreie Prüfmethoden für das Bauwesen
Filtern
Dokumenttyp
- Vortrag (187)
- Zeitschriftenartikel (111)
- Beitrag zu einem Tagungsband (87)
- Posterpräsentation (64)
- Buchkapitel (10)
- Sonstiges (9)
- Forschungsdatensatz (8)
- Forschungsbericht (4)
- Beitrag zu einem Sammelband (3)
- Dissertation (2)
Sprache
- Englisch (358)
- Deutsch (127)
- Mehrsprachig (1)
Schlagworte
- Concrete (102)
- Ultrasound (87)
- LIBS (63)
- Monitoring (53)
- Non-destructive testing (39)
- Beton (29)
- Zerstörungsfreie Prüfung (29)
- Ultraschall (28)
- NDT (26)
- Coda wave interferometry (21)
- Embedded sensors (20)
- Chloride (18)
- Material moisture (18)
- Nondestructive testing (18)
- Structural health monitoring (18)
- Air-coupled ultrasound (17)
- Civil engineering (17)
- SealWasteSafe (17)
- Bridge (14)
- Reliability (14)
- Validation (14)
- Existing structures (13)
- Imaging (13)
- Nachrechnung (12)
- Radar (12)
- Ultrasonic (11)
- Building materials (10)
- Chlorid (10)
- NMR (10)
- Brücke (9)
- Cement (9)
- Chlorine (9)
- Coda Wave Interferometry (9)
- Messunsicherheit (9)
- Qualitätssicherung (9)
- RFID (9)
- Schädigung (8)
- Structural Health Monitoring (8)
- Acoustic emission (7)
- Assessment (7)
- Bauwesen (7)
- Bridges (7)
- Corrosion (7)
- Fluidics (7)
- Measurement uncertainty (7)
- Bestandsbauwerke (6)
- Bridge Monitoring (6)
- Bridge monitoring (6)
- Brücken (6)
- Damage (6)
- Defect detection (6)
- Digitalisierung (6)
- Luftgekoppelter Ultraschall (6)
- Moisture transport (6)
- Radioactive waste (6)
- SHM (6)
- Synthetic Aperture Focusing Technique (6)
- Verschlussbauwerke (6)
- ZfP (6)
- Borehole probe (5)
- Codawelleninterferometrie (5)
- Concrete bridges (5)
- Damage detection (5)
- Distributed acoustic sensing (5)
- Embedded Sensors (5)
- Engineered barrier systems (5)
- Fatigue (5)
- Mapping (5)
- Muon tomography (5)
- Physisorption (5)
- Reassessment (5)
- Smart structures (5)
- Spectroscopy (5)
- Ultrasonic imaging (5)
- Zuverlässigkeitsbewertung (5)
- BIM (4)
- Coda Wave Interferometry (CWI) (4)
- Cracks (4)
- DAS (4)
- Embedded humidity sensors (4)
- Endlager (4)
- Engineered Barrier System (EBS) (4)
- Engineered barrier (4)
- Feuchte (4)
- Fluidic devices (4)
- Interlaboratory comparison (4)
- Measurement (4)
- Messdaten (4)
- Non-Destructive Testing (4)
- Nondestructive Testing (4)
- Passive RFID (4)
- Passive sensor interface (4)
- Phased array technique (4)
- Quality assurance (4)
- Reverse time migration (4)
- Sensors (4)
- Structural safety (4)
- Sulphate (4)
- Ultraschall-Echoverfahren (4)
- Verschlussbauwerk (4)
- Wood (4)
- ZfPBau (4)
- ZfPStatik (4)
- Zuverlässigkeitsanalyse (4)
- AAM (3)
- Abbildungsverfahren (3)
- Abdichtbauwerk (3)
- Acoustic-flow interaction (3)
- Aeroacoustics (3)
- Air-coupled (3)
- Alkali-Kieselsäure-Reaktion (3)
- Alkali-activated material (3)
- Alkalien (3)
- Betonfahrbahndecke (3)
- Bingham fluid (3)
- Bohrlochsonde (3)
- Borehole (3)
- Cellular polypropylene (3)
- Coda (3)
- Concrete structures (3)
- Corresponding relative humidity (3)
- Digital twin (3)
- Digitaler Zwilling (3)
- Dynamic stall (3)
- Engineered barriers (3)
- Fluidic oscillators (3)
- Fluidischer Oszillator (3)
- Frequency modulation (3)
- Geophysics (3)
- Ground penetrating radar (3)
- Imaging condition (3)
- Industrie 4.0 (3)
- Interferometry (3)
- Knudsen effect (3)
- Korrosion (3)
- LAUS (3)
- LIPS (3)
- Laser induced plasma (3)
- Long term monitoring (3)
- Moisture (3)
- NDT-CE (3)
- Neutronensonde (3)
- Non destructive testing and evaluation (3)
- Non-destructive testing in civil engineering (3)
- Normung (3)
- Nuclear (3)
- Nuclear waste (3)
- Nuclear waste repositories (3)
- Partial pore saturation (3)
- Partially saturated pores (3)
- Pile integrity testing (3)
- Predisposal (3)
- Radioactive waste disposal (3)
- Reconstruction algorithm (3)
- Reference specimen (3)
- Reinforced concrete (3)
- Reliability assessment (3)
- Reverse Time Migration (3)
- Salzbeton (3)
- Sandsteine (3)
- Signal processing (3)
- Simulation (3)
- Spannbetonschwellen (3)
- Sulfate (3)
- Tendon duct (3)
- Ultrasonic testing (3)
- Underground (3)
- Vibration (3)
- Water layer thickness (3)
- Wave propagation (3)
- Zerstörungsfreie Prüfung im Bauwesen (3)
- Zustandsermittlung (3)
- coda wave interferometry (3)
- 3DCP (2)
- Abdichtbauwerk / Verschlussbauwerk (2)
- Acoustic emission monitoring (2)
- Additive manufacturing of concrete (2)
- Aerodynamics (2)
- Air coupled ultrasound (2)
- Alkali-Activated Mortars (2)
- Alkalies (2)
- Ambient seismic noise measurements (2)
- Amorphous materials (2)
- Analytik (2)
- Asphalt (2)
- Berührungsloser Ultraschall (2)
- Bestandsbauwerk (2)
- Bildgebende Darstellung (2)
- Bistable amplifier (2)
- Blast experiment (2)
- Boltzmann plot (2)
- Brückenbauwerke (2)
- Brückenträger (2)
- CT (2)
- Calibration (2)
- Cement-based materials (2)
- Cemented waste (2)
- Chemisoprtion (2)
- Chemisorption (2)
- Circular economy (2)
- Classification (2)
- Concrete and screed (2)
- Condition assesment (2)
- Crack depth (2)
- Damage indices (2)
- Damage processes (2)
- Data science (2)
- Datenbank (2)
- Datenfusion (2)
- Deconvolution (2)
- Defects (2)
- Delamination (2)
- Diffusion coefficient (2)
- Digital image correlation (2)
- Distributed fiber optic sensors (2)
- Doctoral School (2)
- Durability assessment (2)
- Earth masonry (2)
- Eingebettete Sensorik (2)
- Elastic wave (2)
- Electric discharge (2)
- Electrical impedance (2)
- Embedded fiber optic sensor (2)
- Existing Concrete Structures (2)
- Existing bridges (2)
- Faseroptik (2)
- Fluidic device (2)
- Fluidische Oszillatoren (2)
- Fundament (2)
- Glasmalfarben (2)
- Heterogeneity (2)
- Indoor Localization (2)
- Inspection (2)
- Inspektion (2)
- Integrity testing (2)
- Künstliche Intelligenz (2)
- Large Aperture Ultrasonic System (LAUS) (2)
- Laser Doppler vibrometer (2)
- Legged robots (2)
- Load Experiment (2)
- Luftgekoppelt (2)
- MRFA (2)
- Magnesia shotcrete (2)
- Materials technology (2)
- Measurement Uncertainty (2)
- Mesopores (2)
- Messung (2)
- Mobile Robot (2)
- Mobile system (2)
- Mobiles LIBS (2)
- Moisture measurement techniques (2)
- Moisture measurements (2)
- Molecular diffusion (2)
- NDE 4.0 (2)
- NDT Inspection (2)
- NMR relaxometry (2)
- Nachrechnungsrichtlinie (2)
- Nasschemie (2)
- Non destructive testing (2)
- Non-destrucive testing (2)
- Nonlinear (2)
- Normalized-Input-Output-Minimization (2)
- Nuclear Waste (2)
- Oberflächenrelaxivität (2)
- Parkbauten (2)
- Piezoelectric transducer (2)
- Pile (2)
- Plasma reheating (2)
- Pore volume distribution (2)
- Pore-size distribution (2)
- Porengrößenverteilung (2)
- Porosität (2)
- Pre-stress loss (2)
- Predis (2)
- Prestressed concrete (2)
- Probabilistic (2)
- Probabilistic methods (2)
- Probability of Detection (2)
- Procedure (2)
- Process monitoring (2)
- Pulse echo method (2)
- Quadruped robots (2)
- RFID based sensors (2)
- RFID-based sensors (2)
- Rebar (2)
- Reconstruction (2)
- Reference (2)
- Reference material (2)
- Refracto-vibrometry (2)
- Relative humidity (2)
- Rheology (2)
- Risse (2)
- Rotation (2)
- SAFT (2)
- Salt concrete (2)
- Sandstein (2)
- Screed (2)
- SealWasteSafe project (2)
- Seismic (2)
- Sensorik (2)
- Setup and Validation (2)
- Shaker (2)
- Shotcrete (2)
- Smart sensors (2)
- Sorption isotherm (2)
- Spannbetonbrücke (2)
- Spannbetonschwelle (2)
- Stahlbeton (2)
- Structural response (2)
- Sulfates (2)
- Tausalzeintrag (2)
- Timber (2)
- Transmissibility function (2)
- Ultraschall-Echo-Verfahren (2)
- Ultraschallverfahren (2)
- Ultrasonic Echo (2)
- Ultrasonic Echo Technique (2)
- Ultrasonic echo (2)
- Umweltsimulation (2)
- Uncertainty (2)
- Waste management (2)
- Waste package (2)
- Wind turbine (2)
- ZfP im Bauwesen (2)
- Zinc (2)
- Zustandsbewertung (2)
- Zuverlässigkeitstheorie (2)
- 3D Druck von Beton (1)
- 3D-CT (1)
- 6-C vibration signals (1)
- AIC picker (1)
- AKR (1)
- Abbruchstatik (1)
- Abschlussbauwerke (1)
- Acceleration sensors (1)
- Acoustic sensors (1)
- Acousto-optic effect (1)
- Additive Fertigung (1)
- Additive Manufacturing (1)
- Additive manufacturing (1)
- Adsorbed water layer thickness (1)
- Air coupled (1)
- Airfoil pitching (1)
- Airfoil surging (1)
- Akaike information criterion picker (1)
- Akustische Emission (1)
- Akustische Verfahren (1)
- Alkali-Activated Material (1)
- Alkali-Silica Reaction (ASR) (1)
- Alkali-activated materia (1)
- Alkali-activated mortars (1)
- Alkaliempfindlichkeit (1)
- Analytical Chemistry (1)
- Angle of attack oscillations (1)
- Anhydrit (1)
- Anode (1)
- Arrival time (1)
- Artificial intelligence (1)
- Atomic and molecular mapping (1)
- Autonome Systeme (1)
- Bandgap quenching (1)
- Barriere (1)
- Baustoffe (1)
- Bauteilintegrierte Sensoren (1)
- Bauwerksdiagnostik (1)
- Bauwerksmonitoring (1)
- Bauwerksprüfung (1)
- Betonbrücke (1)
- Betonfahrbahndecken (1)
- Betonprüfung (1)
- Betonschwellen (1)
- Betonstahl (1)
- Betz vortex relation (1)
- Beurteilung von Bestandstragwerken (1)
- Bingham Fluid (1)
- Bistable fluidic amplifier (1)
- Blast tests (1)
- Bound water (1)
- Boundary layer receptivity, stability & separation (1)
- Boundary layers (1)
- Bridge inspection (1)
- Bridge reassessment (1)
- Bridge structures (1)
- Brunauer-Emmett-Teller (BET) Method (1)
- Building waste (1)
- CF-LIBS (1)
- CODA wave interferometry (1)
- CWI (1)
- Calcium carbide method (1)
- Calibration free LIBS (1)
- Capillary suction (1)
- Cement pastes (1)
- Chemical analysis (1)
- Chemische Analyse (1)
- Chemometics (1)
- Chemometrics (1)
- Chlor (1)
- Chloride extraction (1)
- Chlorides (1)
- Chloridgehalt (1)
- Chlorride (1)
- Cloud storage (1)
- Coda wave (1)
- Competencies (1)
- Compressive Concrete Strength (1)
- Compressive concrete strength (1)
- Computational fluid dynamics (1)
- Computed tomography (1)
- Computertomographie (1)
- Concret (1)
- Concrete Bridge (1)
- Concrete drying (1)
- Concrete printing (1)
- Concrete testing (1)
- Condition assessment (1)
- Construction and demolition waste (1)
- Corner echo (1)
- Crack (1)
- Crack Detection (1)
- Crack detection (1)
- Cross-correlation function (1)
- Curriculum (1)
- Damage analysis (1)
- Damage assessment (1)
- Darr method (1)
- Data Science (1)
- Data fusion (1)
- Data in brief (1)
- Data-informed reliability analysis (1)
- Data-supported assessment (1)
- Datanablage (1)
- Datenablage (1)
- Datenqualität (1)
- Datenwissenschaft (1)
- Deep penetration (1)
- Deep stall (1)
- Defect (1)
- Detection (1)
- Deterioration (1)
- Dickenbestimmung (1)
- Digitalization (1)
- Digitization (1)
- Disposal (1)
- Distributed fiber optic sensing (1)
- Distributed humidity sensing (1)
- DoE (1)
- Drilling resistance (1)
- Earth material (1)
- Earthquake (1)
- Earthquake data (1)
- Eexisting structures (1)
- Effective gas diffusion coefficient (1)
- Eignungsprüfung (1)
- Elastic (1)
- Elastic reverse time migration (1)
- Electric impedance (1)
- Electrical resistivity (1)
- Embedded transducers (1)
- Embedded ultrasonic sensor (1)
- Endlagerung (1)
- Engineered barrier system (1)
- Engineered barrier; (1)
- Estrich (1)
- Evaluation (1)
- Event localization (1)
- Existing structure (1)
- Explosionswirkung (1)
- Explosivstoff (1)
- Explosivstoffe (1)
- Faseroptische Sensorik (1)
- Ferroelectret (1)
- Feuchtegehalt (1)
- Feuchtemessung (1)
- Fiber optic sensing (1)
- Fiber optic sensors (1)
- Fiber orientation (1)
- Fiber-optic vibration monitoring (1)
- Fibre optic sensing (1)
- Fibre orientation (1)
- Fluidic Switch (1)
- Fluidic actuator (1)
- Fluidic oscillator (1)
- Fluidische Anregung (1)
- Fluidischer Schalter (1)
- Fluoreszenzspektroskopie (1)
- Flüssigwasser (1)
- Foundation (1)
- Foundation reuse (1)
- Foundations (1)
- Free stream velocity osciallations (1)
- Frequency analysis (1)
- Frequenzmodulation (1)
- Fundamente (1)
- GPR (1)
- Galvanic corrosion (1)
- Gas diffusion (1)
- Gas transport in porous media (1)
- Geopolymer (1)
- Geostatistics (1)
- Geotechnics (1)
- Geothermal engineering (1)
- Gesteinskörnung (1)
- Gleisoberbau (1)
- Grain size (1)
- Grain sizes (1)
- Ground penetrating radar (GPR) (1)
- Harsh environment (1)
- Harsh environments (1)
- Health monitoring (1)
- Heterogeneous material (1)
- Higher order spectra (1)
- Hilbert transform (1)
- Honeycomb (1)
- Horizontally polarized shear waves (1)
- Hydration (1)
- Hydrogen (1)
- Hydrogen tank (1)
- Hygrometrie (1)
- IFC (1)
- Identification (1)
- Impact Echo (1)
- Impact echo (1)
- Impact-Echo (1)
- Impact-echo (1)
- In-air ranging (1)
- Industry 4.0 (1)
- Integrity (1)
- Integrity monitoring (1)
- IoT (1)
- Istzustandserfassung (1)
- Kiesnest (1)
- Kirchhoff (1)
- Klimawechsellagerung (1)
- Knudsen diffusion (1)
- Kontaktlos (1)
- Kontaktloses Impakt-Echo (1)
- Kritischer (1)
- L-curve (1)
- LAUS (Large Apertur Ultrasonic System) (1)
- Laboratory tests (1)
- Lamb waves (1)
- Large Aperture Ultrasonic System (1)
- Large Aperture Ultrasound System (LAUS) (1)
- Laser induced breakdown spectroscopy (1)
- Laser-Doppler-Vibrometer (1)
- Laser-induced breakdown spectroscopy (LIBS) (1)
- Lebenszyklus (1)
- Lehrplan (1)
- Leitfaden (1)
- Life cycle (1)
- Life management (1)
- LoRaWAN (1)
- Load rating (1)
- Localisation (1)
- Long-term monitoring (1)
- Low-cost (1)
- MC-LIBS (1)
- MIMO (1)
- Machine learning (1)
- Macropores (1)
- Maschinelles Lernen (1)
- Material sorting (1)
- Materialcharakterisierung (1)
- Measurement chain (1)
- Measurements (1)
- Mechanical Load (1)
- Mercury intrusion porosimetry (1)
- Messkette (1)
- Metamaterial (1)
- Micro heterogeneity (1)
- Micro-computed tomography (1)
- Microseismicity (1)
- Microstructure (1)
- Mining (1)
- Mobile Plattform (1)
- Mobile-LIBS (1)
- Modelling mass transfer (1)
- Moisture distribution (1)
- Moisture measurement (1)
- Moisture monitoring (1)
- Morsleben Repository (ERAM) (1)
- Moving vehicles (1)
- Multi-sensor (1)
- Multidisciplinary (1)
- Multiple Lineare Regression (1)
- Multiplet (1)
- Muon (1)
- Muon imaging (1)
- Muons (1)
- NDE (1)
- Nanopores (1)
- Natural stones (1)
- Natural vibration (1)
- Nicht rostender (1)
- Noise (1)
- Non-Contact (1)
- Non-Destructive Testing (NDT) (1)
- Non-destrucitve testing (1)
- Non-destructive testing (NDT) (1)
- Non-destructive testing of concrete (1)
- Normung Roadmap (1)
- Nuclear Magnetic Resonance (1)
- Nuclear Structures (1)
- Nuklear magnetische Resonanz (1)
- Numerical analysis (1)
- Numerical modelling (1)
- On-site (1)
- On-site analysis (1)
- On-site measurements (1)
- OsciFreq (1)
- Oven drying (1)
- PH monitoring in concrete (1)
- POD (1)
- Parallel seismic (1)
- Parallelseismik (1)
- Partial safety factor modification (1)
- Partiallly saturated pores (1)
- Particle motion trajectory (1)
- Particle size (1)
- Pfahlgründung (1)
- Phased array (1)
- Physikalisches Modell (1)
- Physisoprtion (1)
- Pile testing (1)
- Planck function (1)
- Plasma diagnostics (1)
- Plasma imaging (1)
- Plasma modeling (1)
- Pod (1)
- Polyamide (1)
- Polymer optical fibers (1)
- Pore size (1)
- Pore space characterization (1)
- Porengrößen (1)
- Porosity (1)
- Porous building materials (1)
- Porous materials (1)
- Porous media (1)
- Practicality measurement (1)
- Prestress (1)
- Prestressed bridge (1)
- Prestressed concrete bridge (1)
- Prestressing Force (1)
- Prestressing force (1)
- Probabilistic reassessment (1)
- Probabilistik (1)
- Probabilistischen Bewertung (1)
- Probability of detection (1)
- Probability of detection (POD) (1)
- Prozessüberwachung (1)
- Prüfanweisung (1)
- Puls-echo method (1)
- Pulse compression (1)
- Pulse-echo method (1)
- Pulse-echo technique (1)
- Quantenpunkte (1)
- Quantification (1)
- Quecksilberporosimetrie (1)
- Querkraftnachweis (1)
- REverse Time Migration (RTM) (1)
- RFID sensors (1)
- RFID technology (1)
- RTM (1)
- Radiated wavefield (1)
- Radiation monitoring (1)
- Radiation sensors (1)
- Radioactive Waste Disposal (1)
- Radiography (1)
- Ranging (1)
- Ratiometric fluorescence (1)
- Re-assessment of exiting bridges (1)
- Readiness for laying (1)
- Real time monitoring (1)
- Rebound Hammer (1)
- Rebound hammer (1)
- Rebound number (1)
- Recycling (1)
- Reference data (1)
- Reflected pressure (1)
- Refraktovibrometrie (1)
- Reinforced Concrete (1)
- Reinforced Concrete Structures (1)
- Reinforcement (1)
- Relative Luftfeuchte (1)
- Relaxation times (1)
- Relaxometrie (1)
- Reliabiilty (1)
- Reverse Time Migration (RTM) (1)
- Roadmap (1)
- Roboter (1)
- Rough surface (1)
- Round robin (1)
- Round robin test (1)
- Röntgen-Refraktion (1)
- S1-ZGV mode (1)
- SHT (1)
- SMT (1)
- Salt rock (1)
- Sandstone (1)
- Scattering (1)
- Schadensanalyse (1)
- Schallgeschwindigkeit (1)
- Schdensfrüherkennung (1)
- Schichtaufbau (1)
- Schieneninfrastruktur (1)
- Schädigungscharakterisierung (1)
- Sealing structures (1)
- Seismic interferometry (1)
- Seismic load (1)
- Seismic migration (1)
- Seismic signal reconstruction (1)
- Seismological noise-based methods (1)
- Seismology (1)
- Self-absorption (1)
- Sensor (1)
- Sensor technology (1)
- Sensors in concrete (1)
- Service life (1)
- Shadowgraphy (1)
- Slope stability (1)
- Solubility (1)
- Sonic crystal (1)
- Sonic stress wave (1)
- Sorption theory (1)
- Spannbetonbrücken (1)
- Specimen (1)
- Spectral induced polarization (1)
- Spectral overlap (1)
- Spektroskopie (1)
- Sprengversuche (1)
- Spritzbeton (1)
- Stand der Technik (1)
- Standardization roadmap (1)
- State-of-the-art (1)
- Static and dynamic reassessment (1)
- Statischer Nachweis (1)
- Statistical analysis (1)
- Steel fiber reiniforced concrete (1)
- Steel fibre reinforced concrete (FRC) (1)
- Steel liner (1)
- Stochastic model (1)
- Stochastic modeling (1)
- Strength (1)
- Stress (1)
- Structural engineering (1)
- Sulfat (1)
- Suppressing vibrations (1)
- Surface cracks (1)
- Surface relaxivities (1)
- Synthetic Aperture Focusing Technique (SAFT) (1)
- Synthetic and building materials (1)
- Synthetic aperture focusing technique (1)
- Tauchwägung (1)
- Tausalz (1)
- Teilsättigung (1)
- Temperature Correction (1)
- Temperature Influence (1)
- Temperature correction (1)
- Test specimen (1)
- Theodorsen theory (1)
- Thermography (1)
- Thick-walled (1)
- Through-transmission (1)
- Thymolblau (1)
- Tikhonov regularization (1)
- Timber structure (1)
- Time of flight (1)
- Time-of-flight measurements (1)
- ToF (1)
- Tomography (1)
- Trailing vortex (1)
- Treatment (1)
- Tunnel fire (1)
- UHPFRC (1)
- Ultra sound (1)
- Ultraschall-Echo (1)
- Ultraschall-Messtechnik (1)
- Ultrasonic Borehole Array (1)
- Ultrasonic Pulse Velocity (1)
- Ultrasonic Velocity (1)
- Ultrasonic echo technique (1)
- Ultrasonic inspection (1)
- Ultrasonic measurement (1)
- Ultrasonic pulse velocity (1)
- Ultrasonic structure-scanner (1)
- Ultrasonic tomography (1)
- Ultrasonic transducer (1)
- Ultrasonic transducers (1)
- Ultrasonic velocity (1)
- Ultrasonic-Echo Borehole Probe (1)
- Underground Repositories (1)
- University (1)
- Unsteady pitching (1)
- Uultrasound (1)
- Validierung (1)
- Vergleichskörper (1)
- Verkehrsinfrastruktur (1)
- Vertical earthquakes (1)
- Vibration modes (1)
- Vibrometer (1)
- Vor-Ort-Untersuchung (1)
- WS-COTDR (1)
- Waste chracterization (1)
- Waste packages (1)
- Wavelet (1)
- Wiedernutzung (1)
- Wind energy (1)
- Wireless (1)
- Wood-based materials (1)
- X-Ray refraction (1)
- X-ray (1)
- X-ray Computed Tomography (CT) (1)
- X-ray computed tomography (CT) (1)
- X-ray tomography (1)
- Zerstörungsfreie Prüfung von Stahlbeton (1)
- Zerstörungsfreie Prüfverfahren (1)
- ZfP-Bau (1)
- Zuverlässigkeit (1)
- coda (1)
- earthquake (1)
- embedded (1)
- monitoring (1)
- pH Wert in Baustoffen (1)
- pH-Monitoring (1)
- standardization (1)
- storage (1)
Organisationseinheit der BAM
- 8 Zerstörungsfreie Prüfung (486) (entfernen)
Paper des Monats
- ja (2)
Eingeladener Vortrag
- nein (187)
Nach 1850 wurde zur weiteren Herabsetzung der Einbrenntemperatur von Glasmalfarben Borax (Na2B4O7 · 10 H2O) zugesetzt. Das Verhältnis war nun 1 Teil SiO2, 3 Teile PbO und 0,5 Teile Borax. Der analytische Nachweis von Bor in eingebrannten Malschichten war bisher jedoch nicht möglich.
In Laborversuchen wurden Glasmalfarben mit unterschiedlichem Gehalt an Borax auf Modellgläser aufgetragen, eingebrannt und anschließend unter simulierten Umweltbedingungen zeitraffend im Klimaschrank bewittert. Mit Hilfe von elektronenmikroskopischen Untersuchungen können Malschichten charakterisiert werden und somit Hinweise auf mögliche Schadensursachen liefern. Der Nachweis von Bor erfolgte mit Hilfe von LIBS-Messungen (Laser Induced Breakdown Spectroscopy) an im Labor hergestellten Glasmalfarben mit unterschiedlichem Boraxgehalt.
Nach 1850 wurde zur weiteren Herabsetzung der Einbrenntemperatur von Glasmalfarben Borax (Na2B4O7 · 10 H2O) zugesetzt. Das Verhältnis war nun 1 Teil SiO2, 3 Teile PbO und 0,5 Teile Borax. Der analytische Nachweis von Bor in eingebrannten Malschichten war bisher jedoch nicht möglich.Daher wurden in Laborversuchen Glasmalfarben mit unterschiedlichem Gehalt an Borax auf Modellgläser aufgetragen, eingebrannt und anschließend unter simulierten Umweltbedingungen zeitraffend im Klimaschrank bewittert.
Mit Hilfe von elektronenmikroskopischen Untersuchungen können Malschichten charakterisiert werden und somit Hinweise auf mögliche Schadensursachen liefern. Erste Versuche zum Nachweis von Bor erfolgten mit Hilfe von LIBS-Messungen (Laser Induced Breakdown Spectroscopy) an im Labor hergestellten Glasmalfarben mit unterschiedlichem Boraxgehalt.
Feuchtemessverfahren
(2018)
The detection of delamination, rot, and cracks in wooden construction elements is a key task for nondestructive testing (NDT). Air-coupled ultrasound (ACU) is used to detect defects and damage without altering the structure permanently. Using through transmission it is possible to detect even small holes and missing adhesive. After interpretation of the inspection data, an assessment of the mechanical properties based on an appraisal of internal defects in the material is feasible. Novel ferroelectret transducers with a high signal-to-noise ratio (SNR) enable a high-precision structure recognition. The transducers made of cellular polypropylene (PP) are quite suitable for ACU testing due to their extremely low Young’s modulus and low density which result in a favorable acoustic impedance for the transmission of ultrasonic waves between the transducer and air. Thus, structures with great dimensions, thickness up to 300 mm and material densities under 500 kg/m³ can be inspected. Promising results were obtained under laboratory conditions with frequencies from 90 kHz to 200 kHz. The advantage of ACU transducers is that they do not require contact to the sample, are accurate, and cost effective. Ultrasonic quality assurance for wood is an important attempt to increase the acceptance of wooden structures and towards sustainability in civil engineering in general.
Ultrasound echo is a widely used NDT technique for determining the internal geometry of structures. Reverse-time migration (RTM) has been recently introduced to NDT applications, as an imaging method for ultrasound data, to overcome some of the limitations (e.g. imaging steeply dipping reflector) experienced by the Synthetic Aperture Focusing Technique (SAFT), the most commonly used imaging algorithm for these measurements.
The standard implementation of RTM also experiences some drawbacks caused by its imaging condition, which is based on the zero-lag of the cross-correlation between source and receiver wavefields and generates high-amplitude low-frequency artifacts. Three alternative imaging conditions, developed for seismic data applications, were tested for their ability to provide better images than the standard cross-correlation: illumination compensation, deconvolution and wavefield decomposition. A polyamide specimen was chosen for the simulation of a synthetic experiment and for real data acquisition. The migrations of both synthetic and real data were performed with the software Madagascar. The illumination imaging condition was able to reduce the low-frequency noise and had a good performance in terms of computing time. The deconvolution improved the resolution in the synthetic tests, but did not showed such benefit for the real experiments. Finally, as for the wavefield decomposition, although it presented some advantages in terms of attenuating the low-frequency noise and some unwanted reflections, it was not able to image the internal structure of the polyamide as well as the cross-correlation did. Suggestions on how to improve the cost-effectiveness of the implementation of the deconvolution and wavefield decomposition were presented, as well as possible investigations that could be carried out in the future, in order to obtain better results with those two imaging conditions.
Advanced ultrasonic imaging for concrete: Alternative imaging conditions for reverse time migration
(2018)
Ultrasound echo is a widely used NDT technique for determining the internal geometry of structures. Reverse-time migration (RTM) has been recently introduced to NDT applications, as an imaging method for ultrasound data, to overcome some of the limitations (e.g. imaging steeply dipping reflector) experienced by the Synthetic Aperture Focusing Technique (SAFT), the most commonly used imaging algorithm for these measurements.
The standard implementation of RTM also experiences some drawbacks caused by its imaging condition, which is based on the zero-lag of the cross-correlation between source and receiver wavefields and generates high-amplitude low-frequency artifacts. Three alternative imaging conditions, developed for seismic data applications, were tested for their ability to provide better images than the standard cross-correlation: illumination compensation, deconvolution and wavefield decomposition. A polyamide specimen was chosen for the simulation of a synthetic experiment and for real data acquisition. The migrations of both synthetic and real data were performed with the software Madagascar. The illumination imaging condition was able to reduce the low-frequency noise and had a good performance in terms of computing time. The deconvolution improved the resolution in the synthetic tests, but did not showed such benefit for the real experiments. Finally, as for the wavefield decomposition, although it presented some advantages in terms of attenuating the low-frequency noise and some unwanted reflections, it was not able to image the internal structure of the polyamide as well as the cross-correlation did. Suggestions on how to improve the cost-effectiveness of the implementation of the deconvolution and wavefield decomposition were presented, as well as possible investigations that could be carried out in the future, in order to obtain better results with those two imaging conditions.
Informationen zu in Betonbauteilen stattfindenden Umlagerungsprozessen sowie Druckspannungsverteilungen können mit konventioneller Messtechnik bislang nicht zweifelsfrei beantwortet werden. Ultraschallmessungen mit eingebetteten Sensoren könnten hier eine sinnvolle Ergänzung zur konventionellen Messtechnik sein. Durch Einsatz der Codawelleninterferometrie (CWI) sind hiermit schon sehr kleine Änderungen im Material detektierbar.
Um diese neue Methodik zu evaluieren, wurde das Forschungsprojekt „Querkrafttragfähigkeit von Spannbetonbrücken – Erfassung von Spannungszuständen in den Spannbetonversuchsträgern mit Ultraschallsensoren“ durch die Bundesanstalt für Straßenwesen (BASt) initiiert. In diesem Projekt wurden durch die Bundesanstalt für Materialforschung und –prüfung (BAM) Ultraschall-Transducer in mehrere Spannbetonträger des Instituts für Massivbau der RWTH Aachen eingebettet, die anschließend bis zum Bruch belastet wurden.
Der Belastungsversuch an einem der Spannbetondurchlaufträger zeigte das große Potential dieser Methodik. Die im Netzwerk erfassten Änderungen der Ultraschallwellengeschwindigkeit geben die Spannungsverhältnisse im Längsschnitt des Trägers schon bei sehr niedrigen Belastungen qualitativ richtig wieder und zeigen bei hohen Belastungen eine gute Korrelation zum Rissbild. Dabei weisen räumliche Anomalien und Änderungen in der Charakteristik der Geschwindigkeitsänderungen oft schon auf Rissbildung hin, wenn diese noch nicht an der Oberfläche sichtbar ist. Dies zeigt das Potential im Hinblick auf eine Frühwarnung. Hierfür und ebenso in Bezug auf eine Quantifizierung der Effekte ist aber noch Entwicklungsarbeit notwendig. Ein Vorteil der Methodik ist, dass die Transducer nicht direkt am Ort der Änderung platziert werden müssen und einen relativ großen Bereich um die Transducer herum erfassen.
Informationen zu in Betonbauteilen stattfindenden Umlagerungsprozessen sowie Druckspannungsverteilungen können mit konventioneller Messtechnik bislang nicht zweifelsfrei beantwortet werden. Ultraschallmessungen mit eingebetteten Sensoren könnten hier eine sinnvolle Ergänzung zur konventionellen Messtechnik sein. Durch Einsatz der Codawelleninterferometrie (CWI) sind hiermit schon sehr kleine Änderungen im Material detektierbar.
Um diese neue Methodik zu evaluieren, wurde das Forschungsprojekt „Querkrafttragfähigkeit von Spannbetonbrücken – Erfassung von Spannungszuständen in den Spannbetonversuchsträgern mit Ultraschallsensoren“ durch die Bundesanstalt für Straßenwesen (BASt) initiiert. In diesem Projekt wurden durch die Bundesanstalt für Materialforschung und –prüfung (BAM) Ultraschall-Transducer in mehrere Spannbetonträger des Instituts für Massivbau der RWTH Aachen eingebettet, die anschließend bis zum Bruch belastet wurden.
Der Belastungsversuch an einem der Spannbetondurchlaufträger zeigte das große Potential dieser Methodik. Die im Netzwerk erfassten Änderungen der Ultraschallwellengeschwindigkeit geben die Spannungsverhältnisse im Längsschnitt des Trägers schon bei sehr niedrigen Belastungen qualitativ richtig wieder und zeigen bei hohen Belastungen eine gute Korrelation zum Rissbild. Dabei weisen räumliche Anomalien und Änderungen in der Charakteristik der Geschwindigkeitsänderungen oft schon auf Rissbildung hin, wenn diese noch nicht an der Oberfläche sichtbar ist. Dies zeigt das Potential im Hinblick auf eine Frühwarnung. Hierfür und ebenso in Bezug auf eine Quantifizierung der Effekte ist aber noch Entwicklungsarbeit notwendig. Ein Vorteil der Methodik ist, dass die Transducer nicht direkt am Ort der Änderung platziert werden müssen und einen relativ großen Bereich um die Transducer herum erfassen.
Four cement-based and four calcium-sulphate-based screed types are investigated. The samples have a diameter of 300 mm and a height of 35 or 70 mm. Up to ten humidity sensors are embedded directly during the concreting of the screed samples. Thus, the humidity over the sample height is monitored during hardening, hydration, evaporation, and oven drying. Furthermore, the screed samples are weighted during every measurement to determine the total mass and the corresponding moisture loss.
To define the pore system precisely, mercury intrusion porosimetry as well as gas adsorption is performed. According to the data, the entire pore volume distribution is known. The measured pore diameters range from 0.8 nm to 100 μm and the total porosity of the examined screeds ranges between 11 % and 22 %.
Based on these measurement data, moisture transport, pore saturation as well as sorption isotherms and their hysteresis may be calculated quantitatively as described by Strangfeld et al.
"INFRASTAR aims to develop knowledge, expertise and skills for optimal and reliable management of structures. The generic methodology is applied to bridges and wind turbines in relation to fatigue offering the opportunity to deal with complementary notions (such as old and new asset management, unique and similar structures, wind and traffic actions) while addressing 3 major challenges: 1/ advanced modelling of concrete fatigue behaviour, 2/new non destructive testing methods for early aged damage detection and 3/probabilistic approach of structure reliability under fatigue. Benefit of cross-experience and inter-disciplinary synergies creates new knowledge. INFRASTAR proposes innovative solutions for civil infrastructure asset management so that young scientists acquire a high employment profile in close dialogue between industry and academic partners. Modern engineering methods, including probabilistic approaches, risk and reliability assessment tools, will take into account the effective structural behaviour of existing bridges and wind turbines by exploiting monitored data. Existing methods and current state-of -the art is based on excessive conservatism which produces high costs and hinders sustainability. INFRASTAR improves knowledge for optimising the design of new structures, for more realistic verification of structural safety and more accurate prediction of future lifetime of the existing structures. That is a challenge for a sustainable development because it reduces building material and energy consumption as well as CO2 production. Within the global framework of optimal infrastructure asset management, INFRASTAR will result in a multi-disciplinary body of knowledge covering generic problems from the design stage process of the new civil infrastructures up to recycling after dismantlement. This approach and the proposed methods and tools are new and allow a step forward for innovative and effective process."
Analyse des Tausalzeintrages in Fahrbahndeckenbetone im Kontext der Alkali-Kieselsäure-Reaktion
(2018)
In den letzten Jahren sind im deutschen Bundesautobahnnetz (BAB-Netz) vermehrt AKR-Schäden an Betonfahrbahndecken aufgetreten, die zum Teil zu einer Halbierung ihrer geplanten Nutzungsdauer von 30 Jahren führte. Ursächlich hierfür ist die Verwendung alkaliempfindlicher Gesteinskörnung, die bei gleichzeitiger Anwesenheit von Wasser infolge der Exposition der Fahrbahndecke und dem alkalischen Milieu durch den Einsatz alkalireicher Portlandzemente bei der Betonherstellung zu einer Alkali-Kieselsäure-Reaktion (AKR) führt. Zusätzlich wird der AKR-Schädigungsprozess in Betonfahrbahndecken durch den externen Tausalzeintrag (primär NaCl) im Winter begünstigt. Vor diesem Hintergrund kommt der Ermittlung des Tausalzeintrags in den Fahrbahndeckenbeton eine große Bedeutung zu. Die Analyse des Tausalzeintrags erfolgte bisher ausschließlich nasschemisch an gemahlenen Bohrkernsegmenten. Nachteilig ist hierbei die fehlende differenzierte Betrachtung des Natriumgehaltes im Zementstein und in der Gesteinskörnung. Der alternative Einsatz von LIBS (Laser-induced breakdown spectroscopy) eröffnet in diesem Kontext neue Möglichkeiten. So wird in diesem Beitrag an Hand von Bohrkernen aus einem AKR-geschädigten BAB-Abschnitt exemplarisch die Vorgehensweise bei der LIBS-Analyse zur Ermittlung der Na- und interagierenden Cl-Verteilung an vertikalen Schnittflächen des Bohrkerns aufgezeigt. Da der Tausalzeintrag primär über den Zementstein erfolgt, wurde der verfälschende Na-Grundgehalt der Gesteinskörnung mittels Zementsteinkriteriums (Nutzung unterschiedlichen Ca-Gehalts in Zementstein und Gesteinskörnung) eliminiert. Vergleichend durchgeführte Cl-Mappings mit Mikroröntgenfluoreszenzanalyse (MRFA) belegen die Güte der durchgeführten LIBS-Messungen.
Aber auch bei der Verifizierung der Übertragbarkeit der Ergebnisse der zum Ausschluss reaktiver Gesteinskörnung bei Neubau und Erneuerung im BAB-Netz eingesetzten Performanceprüfungen mit externem Alkalieintrag auf Praxisverhältnisse hat sich das LIBSVerfahren bewährt. So wurde festgestellt, dass die mit NaCl-Lösung beaufschlagten Laborprüfkörper aus einem repräsentativen Fahrbahndeckenbeton bei der Klimawechsellagerung (KWL) über ihre gesamte Höhe von 10 cm einen Eintrag von Na und Cl erfahren. Weiterhin konnte im Gegensatz zu bisherigen Annahmen erstmals mit LIBS und Nasschemie gezeigt werden, dass die Frost-Tauwechsel-Phase bei der KWL zu keinem erhöhten Tausalzeintrag führt.
In civil engineering concrete is the most used building material for making infrastructures like bridges and parking decks worldwide. It is as a porous and multiphase material made of aggregates with a defined grain size distribution, cement and water as well as different additives and admixtures depending on the application. Different grain sizes are important to ensure the needed density and compressive strength.
The resulting porous cement matrix contains a mixture of flour grains (aggregates with a grain size below 125 lm) and cement particles (particle size≈50lm). Harmful species like chlorides may penetrate together with water through the capillary pore space and may trigger different damage processes. The damage assessment of concrete structures in Germany is estimated due to the quantification of harmful elements regarding to the cement content only. In the evaluation of concrete using LIBS a two-dimensional scanning is necessary to consider the heterogeneity caused by the aggregates. Therefore, a LIBS system operating with a low energy NdCr:YAG laser, a pulse energy of 3 mJ, a wavelength of 1064 nm, a pulse width of 1.5 ns and a Repetition rate of 100 Hz has been used. Different Czerny-Turner spectrometers with CCD detectors in the UV and NIR range have been used for the detection. Large aggregates (macro-heterogeneity) can be excluded from the evaluation, whereas small aggregates in the range of the laser spot size (flour grains) cannot be spatially resolved. In this work the micro heterogeneity caused by flour grains and their impact on the quantification with LIBS will be discussed. To analyze the effect of changing grain sizes and ratios, the ablation behavior has been determined and compared. Samples with defined grain sizes were made and analyzed using LIBS.
The grain size distributions were analyzed with laser diffraction (LDA).
Main aim is to improve ultrasonic sensor networks to monitor concrete structures under dynamic loads. Novel algorithms have to be developed and tested to separate the influence of various effects for field data. Ways to quantify the interpretation of ultrasonic data e.g. in terms of degree of damage or capacity, have to be found. Improve and simplify imaging techniques, extend them to arbitrary structures, to foster field applications.
LAUS - Erste praktische Erfahrungen mit einem neuartigen Ultraschallsystem großer Eindringtiefe
(2018)
Konventionelle Systeme zur Ultraschall-Echo-Prüfung von Betonbauteilen sind in ihrer Eindringtiefe auf etwa einem Meter begrenzt. Zur Prüfung stärkerer Objekte war die Entwicklung eines neuartigen Prüfsystems notwendig. Das LAUS-System (Large Aperture UltraSound) besteht aus 12 einzelnen Arrays, die mit jeweils 32 Einzelprüfköpfen (Scherwellen, 25 – 50 kHz) als Sender oder Empfänger betrieben werden können. Sie werden unabhängig auf Betonoberflächen mit Unterdruck befestigt und kommunizieren drahtlos untereinander und mit der Zentraleinheit. Alle möglichen Kombinationen ergeben 132 Einzelmessungen, die zur Rekonstruktion des durchschallten Volumens genutzt werden. Mehrere dieser Datensätze lassen sich zu einer 3D-Auswertung kombinieren. Das System wurde an mehreren Testobjekten und Bauwerken erfolgreich erprobt. So konnte die fünf Meter dicke, sehr stark bewehrte Fundamentplatte des Fallturms auf dem BAM-Testgelände bei Horstwalde durchschallt werden. Ein zweites Beispiel ist die erfolgreiche Detektion von Spannkanälen in 1,8 m Tiefe in einem massiven Brückenbauwerk.
LAUS - Erste praktische Erfahrungen mit einem neuartigen Ultraschallsystem großer Eindringtiefe
(2018)
Konventionelle Systeme zur Ultraschall-Echo-Prüfung von Betonbauteilen sind in ihrer Eindringtiefe auf etwa einem Meter begrenzt. Zur Prüfung stärkerer Objekte war die Entwicklung eines neuartigen Prüfsystems notwendig. Das LAUS-System (Large Aperture UltraSound) besteht aus 12 einzelnen Arrays, die mit jeweils 32 Einzelprüfköpfen (Scherwellen, 25 – 50 kHz) als Sender oder Empfänger betrieben werden können. Sie werden unabhängig auf Betonoberflächen mit Unterdruck befestigt und kommunizieren drahtlos untereinander und mit der Zentraleinheit. Alle möglichen Kombinationen ergeben 132 Einzelmessungen, die zur Rekonstruktion des durchschallten Volumens genutzt werden. Mehrere dieser Datensätze lassen sich zu einer 3D-Auswertung kombinieren. Das System wurde an mehreren Testobjekten und Bauwerken erfolgreich erprobt. So konnte die fünf Meter dicke, sehr stark bewehrte Fundamentplatte des Fallturms auf dem BAM-Testgelände bei Horstwalde durchschallt werden. Ein zweites Beispiel ist die erfolgreiche Detektion von Spannkanälen in 1,8 m Tiefe in einem massiven Brückenbauwerk.
Der Blick in die Brücke
(2018)