7.2 Ingenieurbau
Filtern
Dokumenttyp
- Zeitschriftenartikel (45) (entfernen)
Referierte Publikation
- ja (45) (entfernen)
Schlagworte
- Compressive strength (4)
- Train passage (4)
- Hammer impact (3)
- Slab track (3)
- Axle sequence (2)
- Bauwerksüberwachung (2)
- Bridge (2)
- Damage detection (2)
- Earth block masonry (2)
- Fatigue (2)
- Moisture content (2)
- Offshore (2)
- Relative humidity (2)
- Resonance (2)
- Soil erosion (2)
- Static axle loads (2)
- Structural Health Monitoring (2)
- Structural health monitoring (2)
- Train-induced ground vibration (2)
- Vehicle–track interaction (2)
- Wind turbine tower (2)
- Acoustic emission (1)
- Acoustic emission analysis (1)
- Ambient excitation (1)
- Ansys Autodyn (1)
- Attenuation (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated operational modal analysis (1)
- Axle impulses (1)
- Ballast track (1)
- Bauwerksdiagnostik (1)
- Bauwerksmonitoring (1)
- Bayesian analysis (1)
- Belastungstest (1)
- Benchmark (1)
- Boundary element (1)
- Box-Behnken (1)
- Bridge resonance (1)
- Bridge vibration (1)
- Brücken (1)
- Building and Construction (1)
- Cancellation (1)
- Cement-based composites (1)
- Civil and Structural Engineering (1)
- Coating (1)
- Cohesive granular materials (1)
- Compliance function (1)
- Compression tests (1)
- Computational (1)
- Concrete (1)
- Condensed Matter Physics (1)
- Continuous soil (1)
- Continuously inhomogeneous geological media (1)
- Continuously inhomogeneous soils (1)
- Crack damage detection (1)
- Cracks (1)
- DUCON® (1)
- Damage characterization (1)
- Damage evolution (1)
- Damage localization (1)
- Decision matrix analysis (1)
- Deterioration (1)
- Digitalisierung (1)
- Discrete Element Method (1)
- Discrete element method (1)
- Drucker-Prager (1)
- Ductility (1)
- Dynamic axle loads (1)
- E-modulus (1)
- Earth blocks (1)
- Earth masonry (1)
- Ermüdung (1)
- Erosion (1)
- Estimation (1)
- Fatigue strength (1)
- Features (1)
- Fequency domain (1)
- Fibre optic sensors (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite elements (1)
- Finite-element boundary-element method (1)
- Fly ash (1)
- GPA (1)
- GPU Parallel computing (1)
- General Materials Science (1)
- Geology (1)
- Geometric vehicle and track irregularities (1)
- Granular cohesion (1)
- Ground vibration (1)
- Grouted connection (1)
- Grouting (1)
- High-rise building (1)
- Horizontal wind turbine (1)
- Hydraulic jet erosion (1)
- Impact (1)
- Impact loading (1)
- Imperfektion (1)
- Impinging jet (1)
- Inclination angle (1)
- Inspection (1)
- Irregular soil (1)
- Jacket support structure (1)
- Jet erosion test (1)
- Jet impingement (1)
- LBM-DEM (1)
- Laminar flow (1)
- Large components (1)
- Lateral dynamic displacement (1)
- Lattice Boltzmann Method (1)
- Lattice Boltzmann method (1)
- Layered soil (1)
- Layered soils (1)
- Load identification (1)
- Load tests (1)
- Load vector (1)
- Load-bearing behaviour (1)
- Local approaches (1)
- Luminescence (1)
- Merkblatt (1)
- Metakaolin (1)
- Micro-reinforcement (1)
- Micromechanical modelling (1)
- Microsilica (1)
- Mitigation (1)
- Mix design (1)
- Mobile elements (1)
- Modal analysis (1)
- Model update (1)
- Model updating (1)
- Modell-Update (1)
- Modulus of elasticity (1)
- Moisture (1)
- Monitoring (1)
- Monitoring-informed inspection and maintenance planning (1)
- Multi-beam track model (1)
- Numerical modeling (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Optimal sensor placement (1)
- Perfectly Matched Layer (PML) (1)
- Piaui state (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Planar tomography (1)
- Post-impact evaluation (1)
- Pressure (1)
- Quasi-static and dynamic tests (1)
- Quasi-static response; (1)
- Rail roughness (1)
- Railway bridge (1)
- Random dynamics and vibrations (1)
- Random stiffness variation (1)
- Randomly heterogeneous soil (1)
- Recovery experiments (1)
- Rehabilitation (1)
- Reinforced concrete structure (1)
- Reliability (1)
- Remote sensing vibrometer (1)
- Repair (1)
- Richtlinie (1)
- SHCC (1)
- Sandstone (1)
- Santa-marta (1)
- Scattered axle impulses (1)
- Scattering (1)
- Schrauben (1)
- Serra da cangalha (1)
- Shell buckling (1)
- Soil forces (1)
- Soil stiffness (1)
- Sorption isotherm (1)
- Static loading (1)
- Statistical evaluation (1)
- Statistical pattern recognition (1)
- Statistical tests (1)
- Stereo photogrammetry (1)
- Stiffness variation (1)
- Strain (1)
- Strength (1)
- Stress-strain relation (1)
- Stress–strain-relation (1)
- Structural system identification (1)
- Structural systems (1)
- Strukturmonitoring (1)
- Sustainable binders (1)
- System identification (1)
- TRC (1)
- Temperature effect (1)
- Temperature effect rejection (1)
- Temperature modeling (1)
- Track deflection (1)
- Track displacements (1)
- Track filter (1)
- Track filtering (1)
- Track-soil interaction (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- Ultrasonic testing (1)
- Unbounded domain (1)
- Uncertainty quantification (1)
- Value of information (1)
- Variational Bayesian statistics (1)
- Vehicle-track interaction (1)
- Vibration measurement (1)
- Viscosity (1)
- Vorspannung (1)
- Water Science and Technology (1)
- Wavenumber domain (1)
- Weld imperfections (1)
- Wheelset (1)
- Wind energy (1)
- Wind energy tower (1)
- Windenergieanlage (1)
- Windenergieanlagen (1)
- Workability (1)
- layered soil (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (45) (entfernen)
Paper des Monats
- ja (5)
This paper proposes a novel method to estimate the lateral displacement of high-rise structures under wind loads. The coefficient β(x) is firstly derived, reflecting the relation between the structural lateral dynamic displacement and the inclination angle at the height x of a structure. If the angle is small, it is the ratio between the structural fundamental mode shape and its first-order derivative without influence of external loads. Several dynamic experiments of structures are performed based on a laser remote sensing vibrometer and an inclinometer, which shows that the fundamental mode is dominated in the structural displacement response under different types of excitations. Once the coefficient β(x) is curve-fitted by measuring both the structural lateral dynamic displacement and the inclination angle synchronously, the real-time structural lateral displacement under operational conditions is estimated by multiplying the coefficient β(x) with the inclination angle. The advantage of the proposed method is that the coefficient β(x) can be identified by lateral dynamic displacement measured in high resolution by the remote sensing vibrometer, which is useful to reconstruct the displacement accurately by the inclination angle under operational conditions
The erosion of natural sediments by a superficial fluid flow is a generic situation in many usual geological or industrial contexts. However, there is still a lack of fundamental knowledge about erosional processes, especially concerning the role of internal cohesion and adhesive stresses on issues such as the critical flow conditions for the erosion onset or the kinetics of soil mass loss. This contribution investigates the influence of cohesion on the surface erosion by an impinging jet flow based on laboratory tests with artificially bonded granular materials. The model samples are made of spherical glass beads bonded either by solid bridges made of resin or by liquid bridges made of a highly viscous oil. To quantify the intergranular cohesion, the capillary forces of the liquid bridges are here estimated by measuring their main geometrical parameters with image-processing techniques and using well-known analytical expressions. For the solid bonds, the adhesive strength of the materials is estimated by direct measurement of the yield tensile forces and stresses at the particle and sample scales, respectively, with specific traction tests developed for this purpose. The proper erosion tests are then carried out in an optically adapted device that permits a direct visualization of the scouring process at the jet apex by means of the refractive index matching technique. On this basis, the article examines qualitatively the kinetics of the scour crater excavation for both scenarios, namely, for an intergranular cohesion induced by either liquid or solid bonds. From a quantitative perspective, the critical condition for the erosion onset is discussed specifically for the case of the solid bond cohesion. In this respect, we propose here a generalized form of the Shields criterion based on a common definition of a cohesion number from yield tensile values, derived at both micro- and macroscales. The article finally shows that the proposed form manages to reconcile the experimental data for cohesive and cohesionless materials, the latter in the form of the so-called Shields curve along with some previous results of the authors which have been appropriately revisited.
A strain-based automated operational modal analysis algorithm is proposed to track the long-term dynamic behavior of a horizontal wind turbine under operational conditions.
This algorithm is firstly validated by a scaled wind turbine model, and then it is applied to the dynamic strain responses recorded from a 5 MW wind turbine system. We observed variations in the fundamental frequency and 1f, 3f excitation frequencies due to the mass imbalance of the blades and aerodynamic excitation by the tower dam or tower wake. Inspection of the Campbell diagram revealed that the adverse resonance phenomenon and Sommerfeld effect causing excessive vibrations of the wind tower.
The train passages over intact or damaged slab tracks on different soils have been calculated by the finite-element boundary-element or the wavenumber-domain method. The influence of track and soil parameters on the distribution of the track displacements and the soil forces has been analysed. The measured and calculated displacement time histories of train passages could be used to identify track damages such as lose sleepers or a lose track plate. The time histories and spectra of the soil forces can explain the measured ground vibration reduction of slab tracks. The calculated displacement and force distributions of slab tracks on continuous soils do not fulfil the Winkler hypothesis and Winkler models should not be used for track analysis.
This article deals with the relevance and practical feasibility of micromechanical simulations for their application to general geomechanical problems involving fluid-saturated granular assemblies, whether frictional or cohesive. A set of conceptual and numerical tools is here presented, advocating for a parallel computation using graphical processing units (GPUs) to treat large numbers of degrees of freedom with conventional Desktop computers. The fluid phase is here simulated with a particle-resolved approach in the frame of the Lattice Botzmann Method (LBM) while the granular solid phase is modelled as a collection of discrete particles from a Molecular Dynamics DEM perspective. The range of possible material behaviours for the solid granular phase is intended here to cover a broad spectrum from purely frictional to viscous cohesive materials with either brittle or transient debonding features. Specific details of the implementation and some validation cases are put forward.
Finally, some exemplary applications in the fields of soil erosion and geotechnical profile installation are provided along with a discussion on the parallel performance of the presented models. The results show that a micromechanical approach can be feasible and useful in practice, providing meaningful insights into complex engineering problems like the erosion kinetics of a soil under an impinging jet or the penetration resistance of a deep foundation in a layered soil profile.
Cerro do Jarau is a conspicuous, circular morpho‐structural feature in Rio Grande do Sul State (Brazil), with a central elevated core in the otherwise flat “Pampas” terrain typical for the border regions between Brazil and Uruguay. The structure has a diameter of approximately 13.5 km. It is centered at 30o12′S and 56o32′W and was formed on basaltic flows of the Cretaceous Serra Geral Formation, which is part of the Paraná‐Etendeka Large Igneous Province (LIP), and in sandstones of the Botucatu and Guará formations. The structure was first spotted on aerial photographs in the 1960s. Ever since, its origin has been debated, sometimes in terms of an endogenous (igneous) origin, sometimes as the result of an exogenous (meteorite impact) event. In recent years, a number of studies have been conducted in order to investigate its nature and origin. Although the results have indicated a possible impact origin, no conclusive evidence could be produced. The interpretation of an impact origin was mostly based on the morphological characteristics of the structure; geophysical data; as well as the occurrence of different breccia types; extensive deformation/silicification of the rocks within the structure, in particular the sandstones; and also on the widespread occurrence of low‐pressure deformation features, including some planar fractures (PFs). A detailed optical microscopic analysis of samples collected during a number of field campaigns since 2007 resulted in the disclosure of a large number of quartz grains from sandstone and monomict arenite breccia from the central part of the structure with PFs and feather features (FFs), as well as a number of quartz grains exhibiting planar deformation features (PDFs). While most of these latter grains only carry a single set of PDFs, we have observed several with two sets, and one grain with three sets of PDFs. Consequently, we here propose Cerro do Jarau as the seventh confirmed impact structure in Brazil. Cerro do Jarau, together with Vargeão Dome (Santa Catalina state) and Vista Alegre (Paraná State), is one of very few impact structures on Earth formed in basaltic rocks.
The surface erosion of soil samples caused by an impinging jet can be analyzed using the jet erosion test (JET), a standard experimental test to characterize the erosion resistance of soils. This paper specifically addresses the flow characteristics of a laminar impinging jet over the irregular surface of granular beds to discuss the pertinence and relevance of commonly used empirical estimations based on a selfsimilar model of a free jet. The JET is here investigated at the microscale with a coupled fluid-particle flow numerical odel featuring the lattice Boltzmann method (LBM) for the fluid phase combined with the discrete element method (DEM) for the mechanical behavior of the solid particles. The hydrodynamics of a laminar plane free jet are confronted with the results from a parametric study of jet impingement, both on solid smooth and fixed granular surfaces, that take into account variations in particle size, distance from jet origin, and jet Reynolds number. The flow characteristics at the bed surface are here quantified, including the maximal values in tangential velocity and wall shear stress, which can be regarded as the major cause of particle detachments under hydrodynamic solicitation. It is shown that the maximal velocity at the impinged surface can be described by the free jet self-similar model, provided that a simple empirical coefficient is introduced. Further, an expression is proposed for the maximal shear stress in laminar conditions, including a Blasius-like friction coefficient that is inversely proportional to the square root of the jet Reynolds number. To conclude, finally, the JET erosion of different cohesionless granular samples is analyzed, confirming that the threshold condition at the onset of granular motion is consistent with the Shields diagram and in close agreement with previous experimental results.
Reliability analysis of deteriorating structural systems requires the solution of time-variant reliability problems.
In the general case, both the capacity of and the loads on the structure vary with time. This analysis can be approached by approximation through a series of time-invariant reliability problems, which is a potentially effective strategy for cases where direct solutions of the time-variant reliability problem are challenging, e.g. for structural systems with many elements or arbitrary load processes. In this contribution, we thoroughly Review the formulation of the equivalent time-invariant reliability problems and extend this approximation to structures for which inspection and monitoring data is available. Thereafter, we present methods for efficiently evaluating the reliability over time. In particular, we propose the combination of sampling-based methods with a FORM (first-order reliability method) approximation of the series system reliability problem that arises in the computation of the lifetime reliability. The framework and algorithms are demonstrated on a set of numerical examples, which include the computation of the reliability conditional on inspection data.
Damage detection and localization in civil or mechanical structures is a subject of active development and research. A few vibration‐based methods have been developed so far, requiring, for example, modal parameter estimates in the reference and damaged states of the investigated structure, and for localization in addition a finite element model. For structures in operation, temperature has been shown to be a major nuisance to the efficiency of such methods because the modal parameters are varying not only with damage but also due to temperature variations. For detection, a few rejection approaches have been developed. Besides the increased complexity, environmental variation is hardly taken into account in localization approaches. In this paper, we propose a sensitivity‐based correction of the identified modal parameters in the damaged state with respect to the temperature field in the reference state, on the basis of a sensitivity analysis with respect to temperature dependent Parameters of the finite element model in the reference state. The approach is then applied to the stochastic dynamic damage locating vector method, where its improved performance under nonuniform temperature variations is shown in a numerical application on a beam.
Within the presented research project, experimental and numerical investigations were performed to develop a thin-shelled, modular, mobile element system made of a micro-reinforced ultra-high-performance ductile concrete (DUCON®). Material parameters were experimentally determined to adapt the material model within the numerical analysis applying the Drucker-Prager relationship. Afterwards, for validation of the numerical models, quasi-static and high-velocity impact tests were performed on plate-like structures. Finally, a suitable geometry of transportable barrier elements will be designed, which provides a maximum of resistance against impact by a minimum of weight and a maximum of mobility.