7.2 Ingenieurbau
Filtern
Dokumenttyp
- Zeitschriftenartikel (45) (entfernen)
Referierte Publikation
- ja (45) (entfernen)
Schlagworte
- Compressive strength (4)
- Train passage (4)
- Hammer impact (3)
- Slab track (3)
- Axle sequence (2)
- Bauwerksüberwachung (2)
- Bridge (2)
- Damage detection (2)
- Earth block masonry (2)
- Fatigue (2)
- Moisture content (2)
- Offshore (2)
- Relative humidity (2)
- Resonance (2)
- Soil erosion (2)
- Static axle loads (2)
- Structural Health Monitoring (2)
- Structural health monitoring (2)
- Train-induced ground vibration (2)
- Vehicle–track interaction (2)
- Wind turbine tower (2)
- Acoustic emission (1)
- Acoustic emission analysis (1)
- Ambient excitation (1)
- Ansys Autodyn (1)
- Attenuation (1)
- Automated Modal Analysis for Tracking Structural Change during Construction and Operation Phases (1)
- Automated operational modal analysis (1)
- Axle impulses (1)
- Ballast track (1)
- Bauwerksdiagnostik (1)
- Bauwerksmonitoring (1)
- Bayesian analysis (1)
- Belastungstest (1)
- Benchmark (1)
- Boundary element (1)
- Box-Behnken (1)
- Bridge resonance (1)
- Bridge vibration (1)
- Brücken (1)
- Building and Construction (1)
- Cancellation (1)
- Cement-based composites (1)
- Civil and Structural Engineering (1)
- Coating (1)
- Cohesive granular materials (1)
- Compliance function (1)
- Compression tests (1)
- Computational (1)
- Concrete (1)
- Condensed Matter Physics (1)
- Continuous soil (1)
- Continuously inhomogeneous geological media (1)
- Continuously inhomogeneous soils (1)
- Crack damage detection (1)
- Cracks (1)
- DUCON® (1)
- Damage characterization (1)
- Damage evolution (1)
- Damage localization (1)
- Decision matrix analysis (1)
- Deterioration (1)
- Digitalisierung (1)
- Discrete Element Method (1)
- Discrete element method (1)
- Drucker-Prager (1)
- Ductility (1)
- Dynamic axle loads (1)
- E-modulus (1)
- Earth blocks (1)
- Earth masonry (1)
- Ermüdung (1)
- Erosion (1)
- Estimation (1)
- Fatigue strength (1)
- Features (1)
- Fequency domain (1)
- Fibre optic sensors (1)
- Filter effects (1)
- Finite element (1)
- Finite element analysis (1)
- Finite elements (1)
- Finite-element boundary-element method (1)
- Fly ash (1)
- GPA (1)
- GPU Parallel computing (1)
- General Materials Science (1)
- Geology (1)
- Geometric vehicle and track irregularities (1)
- Granular cohesion (1)
- Ground vibration (1)
- Grouted connection (1)
- Grouting (1)
- High-rise building (1)
- Horizontal wind turbine (1)
- Hydraulic jet erosion (1)
- Impact (1)
- Impact loading (1)
- Imperfektion (1)
- Impinging jet (1)
- Inclination angle (1)
- Inspection (1)
- Irregular soil (1)
- Jacket support structure (1)
- Jet erosion test (1)
- Jet impingement (1)
- LBM-DEM (1)
- Laminar flow (1)
- Large components (1)
- Lateral dynamic displacement (1)
- Lattice Boltzmann Method (1)
- Lattice Boltzmann method (1)
- Layered soil (1)
- Layered soils (1)
- Load identification (1)
- Load tests (1)
- Load vector (1)
- Load-bearing behaviour (1)
- Local approaches (1)
- Luminescence (1)
- Merkblatt (1)
- Metakaolin (1)
- Micro-reinforcement (1)
- Micromechanical modelling (1)
- Microsilica (1)
- Mitigation (1)
- Mix design (1)
- Mobile elements (1)
- Modal analysis (1)
- Model update (1)
- Model updating (1)
- Modell-Update (1)
- Modulus of elasticity (1)
- Moisture (1)
- Monitoring (1)
- Monitoring-informed inspection and maintenance planning (1)
- Multi-beam track model (1)
- Numerical modeling (1)
- Obstacles (1)
- Offshore geomechanics (1)
- Offshore wind turbine (1)
- Optimal sensor placement (1)
- Perfectly Matched Layer (PML) (1)
- Piaui state (1)
- Pile bending stiffness (1)
- Pile foundation (1)
- Planar tomography (1)
- Post-impact evaluation (1)
- Pressure (1)
- Quasi-static and dynamic tests (1)
- Quasi-static response; (1)
- Rail roughness (1)
- Railway bridge (1)
- Random dynamics and vibrations (1)
- Random stiffness variation (1)
- Randomly heterogeneous soil (1)
- Recovery experiments (1)
- Rehabilitation (1)
- Reinforced concrete structure (1)
- Reliability (1)
- Remote sensing vibrometer (1)
- Repair (1)
- Richtlinie (1)
- SHCC (1)
- Sandstone (1)
- Santa-marta (1)
- Scattered axle impulses (1)
- Scattering (1)
- Schrauben (1)
- Serra da cangalha (1)
- Shell buckling (1)
- Soil forces (1)
- Soil stiffness (1)
- Sorption isotherm (1)
- Static loading (1)
- Statistical evaluation (1)
- Statistical pattern recognition (1)
- Statistical tests (1)
- Stereo photogrammetry (1)
- Stiffness variation (1)
- Strain (1)
- Strength (1)
- Stress-strain relation (1)
- Stress–strain-relation (1)
- Structural system identification (1)
- Structural systems (1)
- Strukturmonitoring (1)
- Sustainable binders (1)
- System identification (1)
- TRC (1)
- Temperature effect (1)
- Temperature effect rejection (1)
- Temperature modeling (1)
- Track deflection (1)
- Track displacements (1)
- Track filter (1)
- Track filtering (1)
- Track-soil interaction (1)
- Train-induced vibration (1)
- Transverse butt weld (1)
- Trench (1)
- Tunnel (1)
- Tunnel-to-surface reduction (1)
- UAS (1)
- UHPC (1)
- Ultrasonic testing (1)
- Unbounded domain (1)
- Uncertainty quantification (1)
- Value of information (1)
- Variational Bayesian statistics (1)
- Vehicle-track interaction (1)
- Vibration measurement (1)
- Viscosity (1)
- Vorspannung (1)
- Water Science and Technology (1)
- Wavenumber domain (1)
- Weld imperfections (1)
- Wheelset (1)
- Wind energy (1)
- Wind energy tower (1)
- Windenergieanlage (1)
- Windenergieanlagen (1)
- Workability (1)
- layered soil (1)
Organisationseinheit der BAM
- 7 Bauwerkssicherheit (45) (entfernen)
Paper des Monats
- ja (5)
Irregularities of the track are a main cause of train-induced ground vibration, and track maintenance is of great importance. Although geometric irregularities at the wheel-rail contact are widely used, other types of irregularities, such as stiffness irregularities, irregularities from different track positions and irregularities in the wave propagation, were analysed in the present study. The track behaviour was investigated by a multi-beam-on-soil model. This track model is coupled with a vehicle model to calculate the vehicle–track interaction. The track model was also used for the track filtering, which transfers a track support error to the equivalent rail irregularity or, conversely, the sharp axle pulse on the rail to a smoother pulse on the soil. In the case in which this filtering varies randomly along the track, the pulses of the moving static load induce a certain ground Vibration component (“the scatter of axle pulses”). This effect was calculated by the superposition of axle pulses in the frequency domain and by a stochastic simulation. Simultaneous vehicle, track and soil measurements at a certain site were used to evaluate the different excitation and ground Vibration components. The agreement between calculations and axle-box and soil measurements is good. The ground vibrations calculated from rail irregularities and corresponding dynamic loads, however, clearly underestimate the measured ground vibration amplitudes. Only the static load that is moving over a varying track support stiffness can produce the important mid-frequency ground Vibration component by the scatter of axle pulses.
The fatigue process of concrete under compressive cyclic loading is still not completely explored. The corresponding damage processes within the material structure are especially not entirely investigated. The application of acoustic measurement methods enables a better insight into the processes of the fatigue in concrete. Normal strength concrete was investigated under compressive cyclic loading with regard to the fatigue process by using acoustic methods in combination with other nondestructive measurement methods. Acoustic emission and ultrasonic signal measurements were applied together with measurements of strains, elastic modulus, and static strength. It was possible to determine the anisotropic character of the fatigue damage caused by uniaxial loading based on the ultrasonic measurements. Furthermore, it was observed that the fatigue damage seems to consist not exclusively of load parallel oriented crack structures. Rather, crack structures perpendicular to the load as well as local compacting are likely components of the fatigue damage. Additionally, the ultrasonic velocity appears to be a good indicator for fatigue damage beside the elastic modulus. It can be concluded that acoustic methods allow an observation of the fatigue process in concrete and a better understanding, especially in combination with further measurement methods.
In this article, the passage of different trains over different bridges will be studied for resonant excitation. The intensity of the resonance will be estimated in frequency domain by using three separated spectra. At first, the excitation spectrum of the modal forces is built by the mode shape and the passage time of the train over the bridge. The second spectrum is the frequency response function of the bridge which include the modal frequency, damping and mass. The third part is the spectrum of the axle sequence of the train. The influences of train speed, bridge length, bridge support, track irregularities, and train type on the resonance amplitudes will be analysed for each of these spectra separately for getting a better insight. A variety of axle-sequence spectra and corresponding rules will be presented for different vehicles and trains. As examples, the passage of a slow freight train over a long-span bridge, a normal passenger train over a medium-span bridge, and a high-speed train over a short bridge will be analysed. Corresponding measurements show the amplification, but also the cancellation of the subsequent axle responses. Namely in one of the measurement examples, the first mode of the bridge was amplified and the second mode was cancelled at a low speed of the train and vice versa at a higher speed.
The statistical subspace-based damage detection technique has shown promising theoretical and practical results for vibration-based structural health monitoring. It evaluates a subspacebased residual function with efficient hypothesis testing tools, and has the ability of detecting small changes in chosen system parameters. In the residual function, a Hankel matrix of Output covariances estimated from test data is confronted to its left null space associated to a reference model. The hypothesis test takes into account the covariance of the residual for decision making. Ideally, the reference model is assumed to be perfectly known without any uncertainty, which is not a realistic assumption. In practice, the left null space is usually estimated from a reference data set to avoid model errors in the residual computation. Then, the associated uncertainties may be non-negligible, in particular when the available reference data is of limited length. In this paper, it is investigated how the statistical distribution of the residual is affected when the reference null space is estimated. The asymptotic residual distribution is derived, where its refined covariance term considers also the uncertainty related to the reference null space estimate. The associated damage detection test closes a theoretical gap for real-world applications and leads to increased robustness of the method in practice. The importance of including the estimation uncertainty of the reference null space is shown in a numerical study
and on experimental data of a progressively damaged steel frame.
The dynamic behaviour of slab and ballast tracks has been investigated by measurements and calculations. Hammer impacts and train passages have been analysed. Measurements have been performed by geophones (velocity transducers) which have been time-integrated to displacements. The calculations are done in frequency-wavenumber domain for multi-beam-on-continuous soil models. The characteristics of the different tracks and track elements have been established in theory and experiment. The frequency-dependent compliances (displacement transfer functions) show clear rail-on-rail-pad resonances or highly damped track-soil resonances. Compared to the rail and sleeper, the track plate has much lower amplitudes. The slab track has usually the highest rail amplitudes due to soft rail pads. The train passage yields track displacements which are a superposition of the axle loads from the two neighbouring axles of a bogie and from the two bogies of two neighbouring carriages. This global behaviour is characteristic for the track plate of the slab track whereas the rails of the slab and the ballast track behave more local with only one bogie of influence. The measurements agree very well with the theory of the continuous soil in case of the six measured slab tracks and acceptably well for the six measured ballast tracks. The measurements allow to find appropriate model parameters and to check the models, for example the Winkler model of the soil has been found less appropriate as it reacts more locally.
Grouted connections are intensively used in offshore rigs, platforms as well as jacket and monopile offshore wind turbine structures. Being located in remote offshore conditions, these connections can experience considerable adverse loading during their lifetimes. Degradation was reported inside similar connections, which were installed in the last three decades. Grouting in the offshore sites may often be proven difficult, which eventually leads to reduced load-bearing capacity of connections in the long run. Thus, repair and rehabilitation of such connections should be planned ahead to minimize operational delays and costs. In this study, scaled grouted connections were manufactured using a novel mould, whose integrity were monitored using digital image correlation (DIC). The connections were loaded under static load to visualize the main failure pattern using distributed fibre optic sensors and acoustic emission (AE) analysis. Grouted connections were then repaired using a cementitious injectable grout. The effectiveness of the grout injection was monitored using dye penetration technique. Finally, specimens are reloaded to identify the potential of such repair for grouted connections.
Many measurements of train induced ground vibrations show high amplitudes for a certain mid-frequency range. This ground vibration component cannot be well explained by dynamic loads of the train. Many characteristics indicate that the axle impulses, which are scattered by an irregular soil, are the excitation. This new understanding of railway-induced ground vibration is verified by numerical analysis. The response of the regular homogeneous and irregular inhomogeneous soils has been calculated by the finite-element method in frequency domain. A specific superposition of the impulse responses has been invented including time shift, axle sequence, track filter and hanning filter. The superposition yields the quasi-static component of the ground vibration which is restricted to very low frequencies and to the close near-field of the track. In case of an irregular soil of which the stiffness varies randomly in space, the superposition yields a mid-frequency ground vibration component from the scattering of the axle impulses. The existence and the importance of this component can thus be demonstrated by the calculations. Some rules of the influence of distance, train speed, soil stiffness, strength and width of the stiffness variation have been derived from the calculations. Many measurements show the unique explanation of the mid-frequency ground vibration component by the scattered axle impulses.
This contribution intends to give an overview on the vibration behaviour of slab tracks in comparison of measurements and calculations and also by comparison of different track types at more than ten different measuring sites.
In theory, tracks on continuous soil are calculated by the frequency-wavenumber domain method. In experiment, geophone measurements are transformed to displacement results. Two aspects of track behaviour are considered, the frequency-dependant compliance of the track, measured by hammer impact, and the deflection under a passing axle load. In theory, the response to a single axle can be calculated, whereas in experiment, only the passage of the whole train can be measured. For comparison of theory and experiment, the calculated deflection under a single axle is superposed to get the response of the whole train. As a result, the slab track characteristics are completely different from the ballast track characteristics where each axle can be seen in the time histories. The slab track has a more global behaviour where only a whole bogie can be found in the track response and moreover, the two neighbouring bogies are not completely separated. The measurement of the different track elements (rail, sleeper, track plate, base layer) and the frequency-dependant compliances with possible resonances yield further information About the properties of the track elements. The calculations show that the soil has the dominant influence on the amplitudes and the width of the track-plate displacements. In the measurement results, the following
parameters are analysed: slab track vs. ballast track, different types of slab tracks, damaged slab tracks, different trains, switches at different measuring points, voided sleepers, an elastic layer, the mortar layer, and different soils at different places. Finally, a good agreement between measured and calculated results is found for the normal and some special (damaged, floating) slab tracks.
Due to the wide range of applications, the easy production and the large field of use, reinforced concrete (RC) is a widespread building material. This variety of applications is reflected in a wide range of physical material properties. Not only therefor it still is a technical challenge to provide all necessary test conditions for experimentally reproducing dynamic effects under impact loading of RC structures. In this paper we present investigations on the thicknesses of RC plates under low and medium high velocity impact loading by a flat-tipped impactor. The planar tomography setup at BAM is used to visualize the impact damage and to characterize the damage features such as cracks, scabbing and spalling. Further, the comparison of tomography results with those of an applied numeric simulation analysis is used to verify the numeric models for future damage prognosis under impact loading. Using the results of both, the tomographic as well as the FE analysis, different damage features were investigated and compared regarding their validity. Crack damage plays a leading part and the significance of summarized crack values as well as their distribution is analyzed. The total damage value but also the determined damage distribution both provide an input for describing damage as a function of the impactor velocity and plate thickness.
Classic non-destructive fatigue crack detection methods reveal the state of the fatigue damage evolution at the moment of application, generally not under operational conditions. The here introduced crack luminescence method realizes a clear visibility of the occurred and growing crack in loaded components during operation. Different established experiments show that due to the sensitive coating a crack Formation can be detected even in early stage under the premise the crack reached the surface. The coating consists of two layers with different properties and functions. The bottom layer emits light as fluorescence under UV radiation. The top layer covers the fluorescing one and prevents the emitting of light in case of no damage at the surface. In case of surface crack occurrence, the luminescent light is clearly noticeable by visual observations and also by standard camera equipment which makes automated crack detection possible as well. It is expected that crack luminescence can increase structural safety as well as reduce costs and time for inspections and preventive maintenance.