7.2 Ingenieurbau
Filtern
Dokumenttyp
- Vortrag (169) (entfernen)
Referierte Publikation
- nein (169)
Schlagworte
- Structural Health Monitoring (16)
- Offshore wind energy (9)
- Ground vibration (8)
- Brücken (7)
- Fatigue (7)
- Offshore (7)
- Design methods (6)
- Physical phenomenology (6)
- Pile foundations (6)
- Structural health monitoring (6)
- Offshore wind turbines (5)
- SHM (5)
- Bahnerschütterungen (4)
- Building vibration (4)
- Deterioration (4)
- Foundations (4)
- Gründungsstrukturen (4)
- Model interpolation (4)
- Monitoring (4)
- Numerical modelling (4)
- Structural systems (4)
- Windenergie (4)
- Buckling (3)
- Damage characterization (3)
- Datenmanagement (3)
- Deep foundations (3)
- Erschütterungsminderung (3)
- Grout (3)
- Hammer impact (3)
- Impact (3)
- Inspection (3)
- Leichtbau (3)
- Maintenance (3)
- Monopiles (3)
- Offshore Windenergieanlagen (3)
- Offshore geomechanics (3)
- Physical testing (3)
- Planar tomography (3)
- Probabilistic (3)
- Shell Buckling (3)
- Slab track (3)
- Soil-structure interaction (3)
- Steel structures (3)
- Train passage (3)
- Vibration (3)
- Wind Energy (3)
- Zivile Sicherheit (3)
- AISTEC (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bayesian updating (2)
- Belastungsversuch (2)
- Bridges (2)
- Compaction Grouting (2)
- Container loading (2)
- Coupled fluid-particle simulation (2)
- Crack detection (2)
- Damage detection (2)
- Design (2)
- Dispersionsmessung (2)
- Drop test (2)
- Elastische Elemente (2)
- Elastische Gleiselemente (2)
- Emission (2)
- Environmental effects (2)
- Erosion (2)
- Erschütterungen (2)
- Erschütterungsprognose (2)
- Fault detection (2)
- Foundation load (2)
- GPU parallel computation (2)
- Großer Fallturm Horstwalde (2)
- High-performance computing (2)
- High-strength concrete (2)
- Inspection planning (2)
- Klimakammer (2)
- Layered soil (2)
- Micromechanical modelling (2)
- Modalanalyse (2)
- Numeric simulation (2)
- Offshore Pile Foundation (2)
- Offshore Windenergy Pile Buckling (2)
- Offshore foundations (2)
- Offshore geotechnics (2)
- Offshore wind (2)
- Offshore wind turbine (2)
- Pile Tip Buckling (2)
- Railway (2)
- Railways (2)
- Reinforced concrete structure (2)
- Reliability (2)
- Repair (2)
- Repowering (2)
- Risslumineszenz (2)
- Schwingungsdynamik (2)
- Statistical method (2)
- Subspace-based method (2)
- Suction bucket (2)
- Temperature effects (2)
- Temperature rejection (2)
- Train-induced ground vibration (2)
- Tunnel (2)
- Ultrasonic testing (2)
- Vehicle-track-soil interaction (2)
- Vibration measurement (2)
- Vibration measurements (2)
- Wellengeschwindigkeit (2)
- Wind (2)
- Windenergy (2)
- 2-span bridge (1)
- Achsimpulse (1)
- Acoustic emission testing (1)
- Amplitude-charge weight laws (1)
- Amplitude-distance laws (1)
- Amplituden-Abstands-Gesetze (1)
- Analysis of variance (1)
- Ansys Autodyn (1)
- Apartment building (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Asphalt (1)
- Assessment (1)
- Attenuation (1)
- Automatisierte Fertigung (1)
- Automatisierte schweißtechniche Fertigung (1)
- Axial load bearing (1)
- Axle impulses (1)
- Axle pulses (1)
- Axle-sequence spectrum (1)
- BAM Windenergie Fügetechnik (1)
- Bahngleis (1)
- Ballast track (1)
- Base isolation (1)
- Baugrunddynamik (1)
- Bauwerk-Boden-Wechselwirkung (1)
- Bauwerksmonitoring (1)
- Bauwerksüberwachung (1)
- Bayes'sche Analyse (1)
- Bayesian System Identification (1)
- Bayesian methods (1)
- Bayesian system identification (1)
- Belastungsfahrt (1)
- Belastungszug (1)
- Beulen (1)
- Big Data (1)
- Bionik (1)
- Blast (1)
- Bodenschlitz (1)
- Bodenübertragungsfunktion (1)
- Boundary element method (1)
- Box-Behnken (1)
- Bridge (1)
- Brücke (1)
- Buckling piles circular shells (1)
- Building information modelling (1)
- Bulging (1)
- CFD (1)
- Cars (1)
- Centerline solidification cracking (1)
- Changing process noise (1)
- Chemisoprtion (1)
- Climate Chamber (1)
- Climate chamber (1)
- Compressive Cyclic loading (1)
- Compressive cyclic loading (1)
- Compressive strength (1)
- Computer Vision (1)
- Concrete (1)
- Crack Luminescence (1)
- Crack formation (1)
- Crack pattern (1)
- Crack repair (1)
- Cracks (1)
- Cyclic axial shearing (1)
- Cyclic degradation (1)
- Cyclic load (1)
- DEM (1)
- DEM-LBM simulation (1)
- DUCON® (1)
- Damage Detection (1)
- Damage identification (1)
- Deckeneigenfrequenzen (1)
- Deckenschwingungen (1)
- Design models (1)
- Design practice (1)
- DiMoWind RDS-PP Maintenance Digital Twin Offshore Wind Energy (1)
- Digital Image Correlation (1)
- Digital Twin (1)
- Digital twin (1)
- Digitalisierung (1)
- Displacements (1)
- Drone (1)
- Drop Test (1)
- Drucker-Prager (1)
- Ductility (1)
- Dynamic soil properties (1)
- Dynamische Bodenkennwerte (1)
- Dämpfung (1)
- E-modulus (1)
- EERA Joint Program (1)
- Earth masonry (1)
- Earthen hydraulic constructions (1)
- Earthen hydraulic infrastructures (1)
- Einflusslinie (1)
- Einflusslinien (1)
- Einfügungsdämmung (1)
- Elastische Gebäudelagerung (1)
- End-of-life decision making (1)
- Energy (1)
- Entscheidungsfindung (1)
- Environmental (1)
- Environmental Effects (1)
- Ermüdungsprüfung (1)
- Ermüdungsschäden (1)
- Erneuerbare Energien (1)
- Erosion of cohesive soils (1)
- Erschütterungen im Fernfeld (1)
- Erschütterungsausbreitung (1)
- Evaluation (1)
- Excitation forces (1)
- Explosion-induced ground vibrations (1)
- FEM (1)
- Fahrzeug-Fahrweg-Boden-Wechselwirkung (1)
- Faseroptik (1)
- Fatigue deterioration (1)
- Fiber optic sensing (1)
- Filter effects (1)
- Finite Elemente Simulation (1)
- Finite element models (1)
- Flexibility (1)
- Floors (1)
- Fluid-structure interaction (1)
- Fly ash (1)
- Footbridge (1)
- Force reconstruction (1)
- Freight train (1)
- Frequency response function (1)
- GMNIA (1)
- GNSS (1)
- GPU parallelisation (1)
- Gebäudelagerung (1)
- Gebäudemodelle (1)
- Gebäudeschwingungen (1)
- Gekoppelte Fluid-Partikel Simulationen (1)
- Geomechanics (1)
- Geomechanics of offshore foundations (1)
- Geometrie (1)
- Gleiströge (1)
- Granular Cohesive Materials, (1)
- Ground (1)
- Ground vibration measurements (1)
- Grout Injection (1)
- Grouted Connection (1)
- Grouted connection (1)
- Grouting (1)
- Halbraum (1)
- High-rise buildings (1)
- High-speed train (1)
- Immission (1)
- Impact damage of reinforced concrete (1)
- Impedanzmethode (1)
- Inertial interaction (1)
- Injection Sequence (1)
- Inspeciton (1)
- Interface (1)
- Interface model (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Jacket support structure (1)
- Jet erosion test (1)
- Kinematic interaction (1)
- Knudsen effect (1)
- Kraft auf den Boden (1)
- LBM-DEM (1)
- LBM-DEM coupling (1)
- Laboratory beam structure (1)
- Laser beam welding (1)
- Lateral load bearing (1)
- Layered soils (1)
- Leichtbauprinzipien (1)
- Lifetime Extension (1)
- Linear parameter varying systems (1)
- Load Test (1)
- Load bearing behaviour (1)
- Long-term shrinkage (1)
- Macromechanical Sample Strength (1)
- Maintal Bridge Gemuenden (1)
- Maintalbrücke Gemünden (1)
- Maintenance Digital Twin Offshore Wind Energy (1)
- Marine geotechnics (1)
- Material Point Method (1)
- Material moisture (1)
- Material tests (1)
- Measurement (1)
- Measurements (1)
- Mechanical challenges (1)
- Messfahrt (1)
- Metakaolin (1)
- Micro silica (1)
- Micro-reinforcement (1)
- Microfine cement (1)
- Micromechanical LBM-DEM simulation (1)
- Micromechanical Tensile Failure (1)
- Micromechanical analysis (1)
- Micromechanical simulation (1)
- Mitigation (1)
- Mix design (1)
- Mobile elements (1)
- Modal Analysis (1)
- Modal load spectrum (1)
- Modal system identification (1)
- Model Update (1)
- Model updating (1)
- Modellierung (1)
- Modes and waves (1)
- Molecular diffusion (1)
- Monopile (1)
- Monopile Buckling (1)
- Movin load test (1)
- Non destructive testing (1)
- Non-Destructive Evaluation (1)
- Non-destructive testing (1)
- Normung (1)
- Numerical analysis (1)
- Numerical model (1)
- Numerical modeling (1)
- Numerical simulation (1)
- Numerical simulation of impact damage (1)
- Offhore (1)
- Office tower (1)
- Offshore Structures (1)
- Offshore Wind (1)
- Offshore Wind Energy (1)
- Offshore Wind Energy Converter (1)
- Offshore Windenergie (1)
- Offshore pile foundations (1)
- Offshore wind energy foundations (1)
- Offshore wind farm (1)
- Offshore wind farms (1)
- Offshore wind-turbine foundations (1)
- Offshore-Wind (1)
- Offshore-Windenergieanlagen (1)
- Offshore-Windkraftanlagen (1)
- Optimal Sensor Placement (1)
- Passenger train (1)
- Pfahlfußbeulen (1)
- Pfahlnachgiebigkeiten (1)
- Physisorption (1)
- Pile Buckling (1)
- Pile Capacity (1)
- Pile Foundation (1)
- Pile ageing (1)
- Pile groups (1)
- Pile retrofit system (1)
- Pile-Tip-Buckling (1)
- Point Cloud (1)
- Post-impact evaluation (1)
- Prediction (1)
- Prediction of explosion induced ground and building vibration (1)
- Predictive maintenance (1)
- Probabilitische Ingenieurmodelle (1)
- Probability of Detection (1)
- Prognose (1)
- Quasi-static and dynamic tests (1)
- Radar (1)
- Railbridge (1)
- Railway bridge (1)
- Railway tracks (1)
- Railway trafiic (1)
- Railway tunnel (1)
- Randelementmethode (1)
- Randomly heterogeneous soil (1)
- Rayleighwellendispersion (1)
- Rechenmodelle (1)
- Rechenverfahren (1)
- Rehabilitation (1)
- Reinforced concrete (1)
- Research data management (1)
- Residual evaluation (1)
- Richtige Fahrzeugmasse (1)
- Risiko (1)
- Risikoanalyse (1)
- Risk (1)
- Risk-based maintenance planning (1)
- Rissprozes (1)
- Rissprozess (1)
- SHM Environmental (1)
- Safety (1)
- Scaling (1)
- Scattering (1)
- Schadensdetektion (1)
- Schadensüberwachung (1)
- Schienenfahrweg (1)
- Schienenfahrwege (1)
- Schwingungsbasierte Verfahren (1)
- Schwingungsmonitoring (1)
- Shrinkage (1)
- Simple and fast prediction (1)
- Simulation and experiment (1)
- Site-characterization (1)
- Size effect (1)
- Slenderness effect (1)
- Soil Struture Interaction (1)
- Soil erosion (1)
- Soil properties (1)
- Soil-Structure-Interaction (1)
- Soil-pile interaction (1)
- Soil-wall floor model (1)
- Soil-water-structure interaction (1)
- Spektralanalyse (1)
- Stability Buckling soil-structure-interaction piles offshore (1)
- Stabilität (1)
- Static load (1)
- Statistical correlations (1)
- Statistical tests (1)
- Statistische Korrelationen (1)
- Stereo photogrammetry (1)
- Stochastic Subspace Damage Detection (1)
- Structural Systems (1)
- Structural integrity (1)
- Structural integrity maintenance (1)
- Structural integrity management (1)
- Strukturmonitoring (1)
- Störgrößen (1)
- Subspace methods (1)
- Subspace-based residual (1)
- Substructures (1)
- Suction Bucket (1)
- Supplementary cementitious materials (1)
- Support structures (1)
- Surface line (1)
- Surface-tunnel reduction (1)
- System Identification (1)
- Systemidentifikation (1)
- TOP (1)
- Temperatureinflüsse (1)
- Tensile Capacity (1)
- Time-variant reliability (1)
- Tip Buckling (1)
- Tomographic damage evaluation (1)
- Track damage (1)
- Train configuration (1)
- Train excitation (1)
- Train passages (1)
- Train speed (1)
- Tran speed (1)
- Transfer fuction (1)
- Transmission (1)
- Tunnel line (1)
- Tunnelstrecke (1)
- UHPC (1)
- Umwelteinflüsse (1)
- Un- certainty (1)
- Uncertainty (1)
- Uncertainty in reference (1)
- Unterraummethoden (1)
- Value of Information (1)
- Varying soil stiffness (1)
- Varying track stiffness (1)
- Vibration monitoring (1)
- Vibrations (1)
- Vollraum (1)
- Water-structure interaction (1)
- Wave-Tower interaction (1)
- Wellenausbreitung (1)
- Wellenausbreitung in der Tiefe (1)
- Wellenfeldberechnung (1)
- Wind Energy Structures (1)
- Wind Turbines (1)
- Wind energy (1)
- Wind turbines (1)
- Wind-farm aerodynamics (1)
- Windfarm wake analysis (1)
- Zuggeschwindigkeit (1)
- elastische Gebäudelagerungen (1)
- risk, reliability, inspection planning, offshore wind turbines (1)
- zerstreute Achslastimpulse (1)
- Übertragungsmatrizen (1)
- Überwachung (1)
Organisationseinheit der BAM
- 7.2 Ingenieurbau (169) (entfernen)
The resonances of railway bridges have often been analysed for short bridges under periodical high-speed trains, for simply supported one-span bridges, for the fundamental bridge mode, and by time-domain analyses. Many time-consuming calculations have been performed to establish simplified rules for standards. In this contribution, the passage of different (existing, new and hypothetic) trains over different bridges will be analysed in frequency domain by using three separated spectra with the purpose to get a better physical insight in the phenomena. At first, the excitation spectrum of the modal forces is built by the mode shape and the passage time of the train over the bridge. The second spectrum is the frequency response function of the bridge which include the modal frequency, damping and mass. The third part is the spectrum of the axle sequence of an arbitrary train which is not limited to periodical or specific (conventional, articulated, regular or standard) trains and which does not include any bridge parameters. The final solution in frequency domain is obtained as the product of these three complex, strongly varying spectra for the dominating bridge mode or in general as the sum of these products over all relevant bridge modes. The time domain solution is obtained via the inverse Fourier transform, and the resulting time histories have been successfully compared with some measurement results. The method is applied to the vertical and torsional modes of a mid-long 1-span bridge on elastomeric bearings under standard train speeds, and to a long multi-span integral bridge under long periodical freight trains. Different resonance and cancellation effects have been found for systematically varied train speeds according to the axle sequence of the whole train which is dominated by the two locomotives in that case. To be more specific, the first torsional mode of the mid-span bridge is excited for a train speed of 100 km/h whereas the second bending mode is excited for a train speed of 160 km/h. In both cases, the other mode is suppressed by the minima of the axle-distance spectra. In addition, the case of the German high-speed train ICE4 and the very high-speed hyperloop case will be discussed briefly. In general, it is shown that resonance effects are also worth to be studied for freight and passenger trains with lower speeds.
The soil-foundation-structure interaction is always important when building vibrations due to train passages have to be considered. The frequency range for train vibrations is up to 100 Hz. Normally, soft surface soils are crucial so that the wavelength can be much smaller than the foundation dimensions. Three topics are of interest for the prediction and the under-standing of building vibrations. 1. The „kinematic interaction“ or the „added foundation ef-fect“, which is calculated either by the combined boundary-element finite-element method or by the wavenumber domain method, results in a reduction of the free-field vibration. The stiff-ness of the foundation resists the wave deformation, plates and walls for horizontally propa-gating waves or piles for vertically incident waves. 2. The „inertial interaction“ or the „added building effect“ yields an amplification around the vertical building resonance, which may be a rigid mode on the compliant soil or a flexible mode for high-rise buildings, and a reduction at higher frequencies. This has been analysed by detailed finite element models of apartment and office buildings. 3. Base isolation is a method to further reduce building vibrations. It is important to know the soil-foundation impedance for the possible reduction, as well as the correct building impedance. A high-rise building cannot be considered as a rigid mass model. It has a frequency-dependent behaviour with longitudinal waves travelling from the founda-tion to the top of the building which include the effect of floor vibrations. Experiences from building projects in Vienna, Frankfort and Berlin will give some additional results for the ex-citation from tunnel lines, the kinematic response of pile foundations, and the inertial re-sponse of the flexible multi-storey buildings.
Die Anwendung von Leichtbauprinzipien im Stahlbau, wie z.B. die Verwendung von aufgelösten Tragstrukturen, sog. Jackets-Fundamenten, bietet ein großes Potential zur Reduzierung des Ressourcenverbrauchs, insbesondere im Hinblick auf die benötigte Stahlmenge.
In diesem Vortrag zeigen wir die Potenziale einer vollständigen Digitalisierung der schweißtechnischen Fertigungs- und Prüfkette auf, um eine vollautomatische Fertigung sowie Qualitätsprüfung von Rohrknoten als Schlüsselelement von Jackets-Fundamenten zu ermöglichen. Darüber hinaus wird der Zusammenhang zwischen der Geometrie der Nahtform und der resultierenden Ermüdungsfestigkeit durch numerische Methoden unter Einbeziehung bionischer Prinzipien bewertet. Es wird gezeigt, dass Hohlprofilknoten vollautomatisch unter Berücksichtigung von Geometrietoleranzen geschweißt werden können. Darüber hinaus konnte die Nahtform gemäß den numerischen Modellen hergestellt werden, was ein großes Potenzial für eine verlängerte Lebensdauer bietet. Anschließend werden die Verbesserungen bei der Ressourceneffizienz und die Reduzierung der Kohlendioxidemissionen durch eine Lebenszyklusanalyse bewertet.
This presentation gives an overview of the recent achievements in simulating piping erosion during the installation process of suction bucket foundations for offshore wind turbines. The physical correctness of the code is validated, and the simulation code's performance on the LUMI supercomputer is presented. The simulation results are compared to experimental data.
The long-term preservation of our infrastructure requires not only intelligent sensor technology and highly developed monitoring procedures, but also innovative digital tools for analyzing, evaluating and utilizing the results. This includes mathematical and, in particular, probabilistic methods for damage detection and tracking as well as for calculating service life and maintenance cycles and data management. The example project Maintal Bridge Gemuenden as part of the AISTEC project shows the workflow for the implementation of structural health monitoring and experimental tests with a train of Deutsche Bahn. The influence lines, as one possible way for damage detection, were measured with a highly accurate GNSS System to locate the trains position when crossing the bridge. The results were compared to measurements from 1987 just before the bridge went in operation.
Monitoringsysteme erfassen kontinuierlich Bauwerksdaten wie z.B. Bauwerksbeschleunigungen, auf deren Grundlage Bauwerksschäden mit Hilfe von SHM-Methoden quantifiziert werden können. Mit den gewonnenen Informationen über den aktuellen Bauwerkszustand können Vorhersagen des Bauwerkszustandes und der Bauwerkszuverlässigkeit aktualisiert und erforderliche Inspektionen und Instandhaltungsmaßnahmen vorausschauend geplant werden. Im BMBF-Forschungsvorhaben AISTEC entwickeln der Fachbereich 7.2 „Ingenieurbau“ innovative Monitoringverfahren zur Systemidentifikation und automatischen Detektion, Lokalisierung und Quantifizierung von Schäden an Infrastrukturbauwerken anhand von gemessenen dynamischen und statischen Bauwerksdaten. Im Rahmen dieses Projektes werden die Verfahren an der Maintalbrücke bei Gemünden angewendet, welche Teil der ICE-Strecke Hannover-Würzburg ist. In diesem Vortrag wird das für die Maintalbrücke Gemünden geplante und umgesetzte Monitoingsystem vorgestellt.
Im AISTEC Projekt erforscht der FB 7.2 Verfahren zur Bewertung von Verkehrsbrücken auf der Gruandlage von sensorbasierten Bauwerksmessungen. In diesem Vortrag wird ein Überlick über die Forschungsarbeiten des FB 7.2 präsentiert. Des Weiteren wird ein Ausblick zur quantitativen Integration von sensorbasierten Bauwerksmessungen in die risiko-basierte prädiktive Planung von Inspektionen und Reparaturen von Ingenieurbauwerken gegeben.
Die aktuelle Instandhaltungsstrategien von Ingenieurbauwerken arbeiten zustandsbasiert und stützen sich auf visuelle Inspektionen in kurzen, starren Intervallen. Beim Übergang zu Predicitive-Maintenance-Strategien können Sensordaten eigesetzt werden um Prognosemodelle der Bauwerke zu aktualisieren. Ein erster Schritt hierzu ist die sensorbasierte Systemidentifikation.
Protection against terroristic or accidental scenarios in industrial settings requires suitable designs of structures to resist blast loads. Field testing as well as finite element simulations are among the techniques available to engineers in the understanding of the structural behavior against blast loading.
As blast testing of complex scenarios can be very resource intensive, tests are generally performed for simplified scenarios. Numerical tools can be used to model these scenarios to get better insight into blast loading, structural response, and the resulting damage to the structure. During the next steps, the simplified scenario is successively modified in numerical simulations to incorporate complexities that cannot be covered in blast testing experiments. One of the conditions for this approach to work is that the original simplified numerical simulation is valid. The scopes and challenges encountered in such a validation are the focus of this presentation/article.
A relatively ‘simple’ field test of a horizontal reinforced concrete (RC) slab subjected to blast loading is taken as an example for validation of the performance of numerical tools. The blast test incorporated various measurement techniques to quantify the blast load as well as the behavior of the RC slab. Blast load was measured using flush mounted piezoelectric pressure gauges, whereas acceleration sensors and fiber-optic sensor cables were used to characterize the dynamic behavior of the slab under blast loading. Additionally, damage characteristics were ascertained also using fiber optic sensing. The application of such measurement techniques, along with different numerical software available for the analysis of the scenario in question, demonstrate the scope of our contribution.
When it comes to the challenges, it begins with proper instrumentation of the test specimen followed by the data processing. For numerical modelling, geometric conditions with appropriate boundary constraints, physical conditions such as the configuration of the rebars, as well as material parameters add to this challenge. The issues of choosing appropriate material models and comparison of results with multiple software tools will be discussed. This discussion forms the basis for a coherent approach to technical-safety assessment of blast effects on structures in its broader sense.
Two measurement campaigns of train-induced ground vibrations are evaluated for the vehicle-track-soil interaction. Ground vibrations, track vibrations and vehicle vibrations have been measured for train passages and impulse excitation and compared with theoretical results. The soil and the track-soil system are calculated by wavenumber integrals. The influence of the vehicle is introduced by a substructure method. By comparing theory and measurement the different components of excitation force and ground vibration can be analysed, the quasi-static excitation, track-alignment errors, the out-of-roundness of wheels, the wheel and rail roughness, and moreover, scattered axle impulses and ineffective high-frequency parts of the wheelset accelerations and forces.
Risslumineszenz
(2018)
Die Risikoanalyse ist ein formales Verfahren zur Unterstützung von Entscheidungen unter Unsicherheit und Risiko. Es ermöglicht eine Optimierung von Maßnahmen zur Verhinderung unerwünschter Konsequenzen. Der Vortrag stellt die aktuellen Aktivitäten an der BAM in dem Feld Risikoanalyse technischer System vor.
Structural health monitoring (SHM) intends to improve the management of engineering structures. The number of successful SHM projects – especially SHM research projects – is ever growing, yielding added value and more scientific insight into the management of infrastructure asset. With the advent of the data age, the value of accessible data becomes increasingly evident. In SHM, many new data-centric methods are currently being developed at a high pace. A consequent application of research data management (RDM) concepts in SHM projects enables a systematic management of raw and processed data, and thus facilitates the development and application of artificial intelligence (AI) and machine learning (ML) methods to the SHM data. In this contribution, a case study based on an institutional RDM framework is presented. Data and metadata from monitoring the structural health of the Maintalbrücke Gemünden for a period of 16 months are managed with the RDM system BAM Data Store, which makes use of the openBIS data management software. An ML procedure is used to classify the data. Feature engineering, feature training and resulting data
are performed and modelled in the RDM system.
Remediation of Cracks Formed in Grouted Connections of Offshore Energy Structures under Static Loads
(2018)
The future energy demand necessitates the exploration of all potential energy sources both onshore and offshore. Global trend has shifted towards offshore energy, which can be obtained from either carbon intensive or renewable options, hence requiring structures such as rigs, platforms, and monopiles. Most of these structures adopt easily installable construction techniques, where lower foundation need to be connected with the super structure by mean of grouted composite joints. Generally, these composite connections have exterior sleeve, interior pile and infill grout. Being located in remote offshore conditions, connections can experience considerable adverse loading during their lifetimes. Degradations were reported inside similar connections, which were installed in last three decades. Besides, grouting in the offshore sites may often be proven difficult, which eventually leads to reduced capacity of connections in the long run. Thus, repair and rehabilitation of such connections should be planned ahead to minimize operational delays and costs in the future. This study aims at characterizing the nature of crack generation in grouted connections and thereby identifying the potential of repair using suitable repair material. Scaled grouted joints were manufactured using a novel mold, and connections were loaded under static load to visualize the main failure pattern. The failure mechanism and loading capacity are found compatible to previous results from earlier literature. Grouted connection was then repaired using cementitious injectable grout. The effectiveness of the repair system is also discussed.
Nowadays geotechnical engineering firms have powerful software tools to extent their consulting business also into dynamic soil-structure interaction, which before has been restricted to a rather small community of specialized experts in this field, and they certainly do. This is particularly true with respect to non-seismic sources, that is all kinds of human induced vibrations. Hence, there is a demand from clients as well as from contractors to have guidance on the requirements as well as the limits of numerical modelling of soil-structure interaction. From the literature as well as from relevant standards, recommendations for the numerical modelling of soil-structure interaction problems involving seismic actions are well known, e. g. ASCE/SEI 4-16. There are, however, some particularities when dealing with human-induced vibrations, which are absent in seismic analyses. For human-induced excitations very little specific guidance has been published in the past. A machine foundation on a homogeneous half space excited by harmonic loads with excitation frequency between 4 Hz and 64 Hz has been analysed by means of several commercially available software packages. Parametric studies have been performed to verify if recommendations for seismic soil-structure analyses are valid for non-seismic analyses as well. This paper provides details on the benchmark example and the most important conclusions from the undertaken parametric studies.
A simple and fast prediction scheme is presented for train-induced ground and building vibrations. For the emission, finite-element boundary-element or multiple-beam-on-continuous-soil models of the track have been analysed and approximated by faster track-on-Winkler-soil models. The vehicle-track interaction due to irregularities yields the excitation forces. For the transmission of waves in the soil, the wavenumber integral of the compliance of layered soils has been evaluated. The calculation time is reduced for the prediction by using the solution of a homogeneous half-space with a frequency-dependent wave velocity (the dispersion) of the soil. For the immision, many 2 and 3-dimenisonal finite-element building models have been investigated, and a good approximation has been established by a 1-dimensional soil-wall-floor model. In addition, the axle sequence of the train, the quasi-static and the “scattered” response of the soil, and the wave propagation from a tunnel to a pile foundation of a building have been included.
Die VDI Richtlinie 3837 enthält detaillierte Angaben zur Erschütterungsemission. Die DIN 45672-3 enthält nur den Tunnel- oder einen Bodenmesspunkt als Ausgangspunkt der Prognose. Die Erschütterungsanregung durch die Fahrzeug-Fahrweg-Wechselwirkung wird beschrieben. Die ERgebnisse der BAM stimmen sehr gut mit dem Prognosekonzept von Highspeed 2 überein. Dies wird an den Punkten 1. Störgrößen, 2. Achsimpulse, 3. Tunnelstrecken aufgezeigt.
In this presentation, we discuss the potential of probabilistic approaches to the design and assessment of offshore foundations. The potential is demonstrated in a numerical example considering a laterally loaded monopile. As an outlook, we present a concept for managing the risk associated with installing large monopiles.