7.2 Ingenieurbau
Filtern
Dokumenttyp
- Vortrag (162) (entfernen)
Referierte Publikation
- nein (162) (entfernen)
Schlagworte
- Structural Health Monitoring (16)
- Offshore wind energy (9)
- Fatigue (8)
- Ground vibration (8)
- Brücken (7)
- Offshore (7)
- Design methods (6)
- Physical phenomenology (6)
- Pile foundations (6)
- Structural health monitoring (6)
- Offshore wind turbines (5)
- SHM (5)
- Bahnerschütterungen (4)
- Building vibration (4)
- Deterioration (4)
- Foundations (4)
- Gründungsstrukturen (4)
- Model interpolation (4)
- Monitoring (4)
- Numerical modelling (4)
- Structural systems (4)
- Buckling (3)
- Damage characterization (3)
- Datenmanagement (3)
- Deep foundations (3)
- Erschütterungsminderung (3)
- Grout (3)
- Hammer impact (3)
- Impact (3)
- Inspection (3)
- Leichtbau (3)
- Maintenance (3)
- Monopiles (3)
- Offshore Windenergieanlagen (3)
- Offshore geomechanics (3)
- Physical testing (3)
- Planar tomography (3)
- Probabilistic (3)
- Shell Buckling (3)
- Slab track (3)
- Soil-structure interaction (3)
- Steel structures (3)
- Train passage (3)
- Vibration (3)
- Wind Energy (3)
- Windenergie (3)
- Zivile Sicherheit (3)
- AISTEC (2)
- Automatisierte schweißtechnische Fertigung (2)
- Bayesian updating (2)
- Belastungsversuch (2)
- Bridges (2)
- Compaction Grouting (2)
- Container loading (2)
- Crack detection (2)
- Damage detection (2)
- Design (2)
- Dispersionsmessung (2)
- Drop test (2)
- Elastische Elemente (2)
- Elastische Gleiselemente (2)
- Emission (2)
- Environmental effects (2)
- Erosion (2)
- Erschütterungen (2)
- Erschütterungsprognose (2)
- Fault detection (2)
- Foundation load (2)
- GPU parallel computation (2)
- Großer Fallturm Horstwalde (2)
- High-strength concrete (2)
- Inspection planning (2)
- Klimakammer (2)
- Layered soil (2)
- Micromechanical modelling (2)
- Modalanalyse (2)
- Numeric simulation (2)
- Offshore Pile Foundation (2)
- Offshore foundations (2)
- Offshore geotechnics (2)
- Offshore wind (2)
- Pile Tip Buckling (2)
- Railway (2)
- Railways (2)
- Reinforced concrete structure (2)
- Reliability (2)
- Repair (2)
- Risslumineszenz (2)
- Schwingungsdynamik (2)
- Statistical method (2)
- Subspace-based method (2)
- Temperature effects (2)
- Temperature rejection (2)
- Train-induced ground vibration (2)
- Tunnel (2)
- Ultrasonic testing (2)
- Vehicle-track-soil interaction (2)
- Vibration measurement (2)
- Vibration measurements (2)
- Wellengeschwindigkeit (2)
- Wind (2)
- Windenergy (2)
- 2-span bridge (1)
- Achsimpulse (1)
- Acoustic emission testing (1)
- Amplitude-charge weight laws (1)
- Amplitude-distance laws (1)
- Amplituden-Abstands-Gesetze (1)
- Analysis of variance (1)
- Ansys Autodyn (1)
- Apartment building (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Asphalt (1)
- Assessment (1)
- Attenuation (1)
- Automatisierte Fertigung (1)
- Automatisierte schweißtechniche Fertigung (1)
- Axial load bearing (1)
- Axle impulses (1)
- Axle pulses (1)
- Axle-sequence spectrum (1)
- BAM Windenergie Fügetechnik (1)
- Bahngleis (1)
- Ballast track (1)
- Base isolation (1)
- Baugrunddynamik (1)
- Bauwerk-Boden-Wechselwirkung (1)
- Bauwerksmonitoring (1)
- Bauwerksüberwachung (1)
- Bayes'sche Analyse (1)
- Bayesian System Identification (1)
- Bayesian methods (1)
- Bayesian system identification (1)
- Belastungsfahrt (1)
- Belastungszug (1)
- Beulen (1)
- Big Data (1)
- Bionik (1)
- Blast (1)
- Bodenschlitz (1)
- Bodenübertragungsfunktion (1)
- Boundary element method (1)
- Box-Behnken (1)
- Bridge (1)
- Brücke (1)
- Buckling piles circular shells (1)
- Building information modelling (1)
- CFD (1)
- Cars (1)
- Changing process noise (1)
- Chemisoprtion (1)
- Climate Chamber (1)
- Climate chamber (1)
- Compressive Cyclic loading (1)
- Compressive cyclic loading (1)
- Compressive strength (1)
- Computer Vision (1)
- Concrete (1)
- Coupled fluid-particle simulation (1)
- Crack Luminescence (1)
- Crack formation (1)
- Crack pattern (1)
- Crack repair (1)
- Cracks (1)
- Cyclic axial shearing (1)
- Cyclic degradation (1)
- Cyclic load (1)
- DEM (1)
- DEM-LBM simulation (1)
- DUCON® (1)
- Damage Detection (1)
- Damage identification (1)
- Deckeneigenfrequenzen (1)
- Deckenschwingungen (1)
- Design models (1)
- Design practice (1)
- Digital Image Correlation (1)
- Digital Twin (1)
- Digital twin (1)
- Digitalisierung (1)
- Displacements (1)
- Drone (1)
- Drop Test (1)
- Drucker-Prager (1)
- Ductility (1)
- Dynamic soil properties (1)
- Dynamische Bodenkennwerte (1)
- Dämpfung (1)
- E-modulus (1)
- EERA Joint Program (1)
- Earth masonry (1)
- Earthen hydraulic constructions (1)
- Earthen hydraulic infrastructures (1)
- Einflusslinie (1)
- Einflusslinien (1)
- Einfügungsdämmung (1)
- Elastische Gebäudelagerung (1)
- End-of-life decision making (1)
- Energy (1)
- Entscheidungsfindung (1)
- Environmental (1)
- Environmental Effects (1)
- Ermüdungsprüfung (1)
- Ermüdungsschäden (1)
- Erneuerbare Energien (1)
- Erosion of cohesive soils (1)
- Erschütterungen im Fernfeld (1)
- Erschütterungsausbreitung (1)
- Evaluation (1)
- Excitation forces (1)
- Explosion-induced ground vibrations (1)
- FEM (1)
- Fahrzeug-Fahrweg-Boden-Wechselwirkung (1)
- Faseroptik (1)
- Fatigue deterioration (1)
- Fiber optic sensing (1)
- Filter effects (1)
- Finite Elemente Simulation (1)
- Finite element models (1)
- Flexibility (1)
- Floors (1)
- Fluid-structure interaction (1)
- Fly ash (1)
- Footbridge (1)
- Force reconstruction (1)
- Freight train (1)
- Frequency response function (1)
- GMNIA (1)
- GNSS (1)
- GPU parallelisation (1)
- Gebäudelagerung (1)
- Gebäudemodelle (1)
- Gebäudeschwingungen (1)
- Geomechanics (1)
- Geomechanics of offshore foundations (1)
- Geometrie (1)
- Gleiströge (1)
- Granular Cohesive Materials, (1)
- Ground (1)
- Ground vibration measurements (1)
- Grout Injection (1)
- Grouted Connection (1)
- Grouted connection (1)
- Grouting (1)
- Halbraum (1)
- High-performance computing (1)
- High-rise buildings (1)
- High-speed train (1)
- Immission (1)
- Impact damage of reinforced concrete (1)
- Impedanzmethode (1)
- Inertial interaction (1)
- Injection Sequence (1)
- Inspeciton (1)
- Interface (1)
- Interface model (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Jacket support structure (1)
- Jet erosion test (1)
- Kinematic interaction (1)
- Knudsen effect (1)
- Kraft auf den Boden (1)
- LBM-DEM (1)
- LBM-DEM coupling (1)
- Laboratory beam structure (1)
- Lateral load bearing (1)
- Layered soils (1)
- Leichtbauprinzipien (1)
- Linear parameter varying systems (1)
- Load Test (1)
- Load bearing behaviour (1)
- Long-term shrinkage (1)
- Macromechanical Sample Strength (1)
- Maintal Bridge Gemuenden (1)
- Maintalbrücke Gemünden (1)
- Marine geotechnics (1)
- Material Point Method (1)
- Material moisture (1)
- Material tests (1)
- Measurement (1)
- Measurements (1)
- Mechanical challenges (1)
- Messfahrt (1)
- Metakaolin (1)
- Micro silica (1)
- Micro-reinforcement (1)
- Microfine cement (1)
- Micromechanical LBM-DEM simulation (1)
- Micromechanical Tensile Failure (1)
- Micromechanical analysis (1)
- Micromechanical simulation (1)
- Mitigation (1)
- Mix design (1)
- Mobile elements (1)
- Modal Analysis (1)
- Modal load spectrum (1)
- Modal system identification (1)
- Model Update (1)
- Model updating (1)
- Modellierung (1)
- Modes and waves (1)
- Molecular diffusion (1)
- Monopile (1)
- Monopile Buckling (1)
- Movin load test (1)
- Non destructive testing (1)
- Non-Destructive Evaluation (1)
- Non-destructive testing (1)
- Normung (1)
- Numerical analysis (1)
- Numerical model (1)
- Numerical modeling (1)
- Numerical simulation of impact damage (1)
- Offhore (1)
- Office tower (1)
- Offshore Structures (1)
- Offshore Wind Energy (1)
- Offshore Wind Energy Converter (1)
- Offshore Windenergie (1)
- Offshore pile foundations (1)
- Offshore wind energy foundations (1)
- Offshore wind farm (1)
- Offshore wind farms (1)
- Offshore wind turbine (1)
- Offshore wind-turbine foundations (1)
- Offshore-Wind (1)
- Offshore-Windenergieanlagen (1)
- Operational modal analysis (1)
- Optimal Sensor Placement (1)
- Passenger train (1)
- Pfahlfußbeulen (1)
- Pfahlnachgiebigkeiten (1)
- Physisorption (1)
- Pile Buckling (1)
- Pile Capacity (1)
- Pile Foundation (1)
- Pile ageing (1)
- Pile groups (1)
- Pile retrofit system (1)
- Pile-Tip-Buckling (1)
- Point Cloud (1)
- Post-impact evaluation (1)
- Prediction (1)
- Prediction of explosion induced ground and building vibration (1)
- Predictive maintenance (1)
- Probabilitische Ingenieurmodelle (1)
- Probability of Detection (1)
- Prognose (1)
- Quasi-static and dynamic tests (1)
- Radar (1)
- Railbridge (1)
- Railway bridge (1)
- Railway tracks (1)
- Railway trafiic (1)
- Railway tunnel (1)
- Randelementmethode (1)
- Randomly heterogeneous soil (1)
- Rayleighwellendispersion (1)
- Rechenmodelle (1)
- Rechenverfahren (1)
- Rehabilitation (1)
- Reinforced concrete (1)
- Repowering (1)
- Research data management (1)
- Residual evaluation (1)
- Richtige Fahrzeugmasse (1)
- Risiko (1)
- Risikoanalyse (1)
- Risk (1)
- Risk-based maintenance planning (1)
- Rissprozes (1)
- Rissprozess (1)
- Road bridges (1)
- SHM Environmental (1)
- Safety (1)
- Scaling (1)
- Scattering (1)
- Schadensdetektion (1)
- Schadensüberwachung (1)
- Schienenfahrweg (1)
- Schienenfahrwege (1)
- Schwingungsbasierte Verfahren (1)
- Schwingungsmonitoring (1)
- Shrinkage (1)
- Simple and fast prediction (1)
- Simulation and experiment (1)
- Site-characterization (1)
- Size effect (1)
- Slenderness effect (1)
- Soil Struture Interaction (1)
- Soil erosion (1)
- Soil properties (1)
- Soil-Structure-Interaction (1)
- Soil-pile interaction (1)
- Soil-wall floor model (1)
- Soil-water-structure interaction (1)
- Spektralanalyse (1)
- Stability Buckling soil-structure-interaction piles offshore (1)
- Stabilität (1)
- Static load (1)
- Statistical correlations (1)
- Statistical tests (1)
- Statistische Korrelationen (1)
- Stereo photogrammetry (1)
- Stochastic Subspace Damage Detection (1)
- Structural Systems (1)
- Structural integrity (1)
- Structural integrity maintenance (1)
- Structural integrity management (1)
- Strukturmonitoring (1)
- Störgrößen (1)
- Subspace methods (1)
- Subspace-based residual (1)
- Substructures (1)
- Suction bucket (1)
- Supplementary cementitious materials (1)
- Support structures (1)
- Surface line (1)
- Surface-tunnel reduction (1)
- System Identification (1)
- System identification (1)
- Systemidentifikation (1)
- TOP (1)
- Temperatureinflüsse (1)
- Tensile Capacity (1)
- Time-variant reliability (1)
- Tip Buckling (1)
- Tomographic damage evaluation (1)
- Track damage (1)
- Train configuration (1)
- Train excitation (1)
- Train passages (1)
- Train speed (1)
- Tran speed (1)
- Transfer fuction (1)
- Transmission (1)
- Tunnel line (1)
- Tunnelstrecke (1)
- UHPC (1)
- Umwelteinflüsse (1)
- Un- certainty (1)
- Uncertainty (1)
- Uncertainty in reference (1)
- Unterraummethoden (1)
- Value of Information (1)
- Varying soil stiffness (1)
- Varying track stiffness (1)
- Vibration monitoring (1)
- Vibrations (1)
- Vollraum (1)
- Water-structure interaction (1)
- Wave-Tower interaction (1)
- Wellenausbreitung (1)
- Wellenausbreitung in der Tiefe (1)
- Wellenfeldberechnung (1)
- Wind Energy Structures (1)
- Wind Turbines (1)
- Wind energy (1)
- Wind turbines (1)
- Wind-farm aerodynamics (1)
- Windfarm wake analysis (1)
- Zuggeschwindigkeit (1)
- elastische Gebäudelagerungen (1)
- risk, reliability, inspection planning, offshore wind turbines (1)
- zerstreute Achslastimpulse (1)
- Übertragungsmatrizen (1)
- Überwachung (1)
Organisationseinheit der BAM
- 7.2 Ingenieurbau (162) (entfernen)
Monopile-Gründungen sind die mit Abstand am häufigsten verwendete Gründungskonstruktion für Offshore-Windenergieanlagen. Ein wesentliches Problem bei der Bemessung ist das lokale Beulen des Gründungspfahls, welches typischerweise im Bereich der Bettung auftritt. Aufgrund der Nichtlinearität der Bettungsrandbedingung sind klassische Bemessungsansätze nicht anwendbar, so dass der Bemessungsingenieur auf eine vollständig numerische Berechnung zurückgreifen muss. In diesem Vortrag wird eine experimentelle Versuchskampagne zur Erzeugung von Kalibrierungsdaten für solche numerischen Modelle vorgestellt. Eine ausführlichere Darstellung findet sich im gleichnamigen Artikel.
This presentation deals with the phenomenology and design of pile foundations for offshore wind turbines, and is divided into two lectures.
The second lecture continues with the case of laterally loaded offshore piles, which bears most relevance for the case of the monopile foundations. Here again, a clear separation between physical reality and design methods is intended.
Finally, the last part of the second lecture introduces several advanced topics which lie outside the classical design approaches, namely the hydromechanical coupling effects (i.e. the excess pore-pressure generation around the monopiles), the cyclic pile fatigue and the so-called pile setup (i.e. the time effects on the axial pile capacity). The relevance of the latter two topics is illustrated with experimental results from a field testing campaign on real large-scale piles.
The research project Verification of Buckling Assessment and Behaviour in Large Monopiles (VERBATIM) focuses on challenges arising due to the ongoing increase of dimensions of monopiles as foundation for offshore wind turbines. This project is focused on two main topics:
- Monopile tip buckling during pile installation
- Local buckling of embedded piles during operation
It is known from previous investigations and experiences in practice that large deformations of a monopile tip during offshore installation works can occur. These large deformations initiated at the tip of the monopile are commonly referred to as “pile tip buckling”. Own research focuses on optimising monopile dimensions to reduce the cost of monopile foundations for offshore wind turbines while preventing pile tip buckling.
Buckling of embedded cylindrical shells for offshore structures is a common engineering task. Structures can be analysed using standard software and have been done so in recent studies e.g., Gottschalk. However, the trend towards larger monopile and optimised structures has led to a fundamental need for better and verified models. A main challenge is the submodelling of the structure-soil-interaction. Developing such complex models is one main goal of the VERBATIM project.
For both main topics model tests were performed at the laboratories of BAM and TU Berlin. These experimental results were used to verify related numerical models and simulations.
Dieser Kurzvortragg erläutert nichtlineare Phänomene die angesichts der aktuell wachsenden Dimensionen von Monopfahlgründungen für Offshorewindenergieanlagen zunehmend an Bedeutung gewinnen. Insbesondere wird dabei auf das Pfahlfußbeulen sowie das Schalenbeulen des bereits installierten Pfahles eingegangen.
The long-term preservation of our infrastructure requires not only intelligent sensor technology and highly developed monitoring procedures, but also innovative digital tools for analyzing, evaluating and utilizing the results. This includes mathematical and, in particular, probabilistic methods for damage detection and tracking as well as for calculating service life and maintenance cycles and data management. The example project Maintal Bridge Gemuenden as part of the AISTEC project shows the workflow for the implementation of structural health monitoring and experimental tests with a train of Deutsche Bahn. The influence lines, as one possible way for damage detection, were measured with a highly accurate GNSS System to locate the trains position when crossing the bridge. The results were compared to measurements from 1987 just before the bridge went in operation.
The new crack luminescence method offers the possibility of making fatigue surface cracks in metallic materials more visible during inspections through a special coating system. This coating system consists of two layers, whereby the first layer has fluorescent properties and emits visible light as soon as it is irradiated by UV light. The top layer is black and is designed to prevent the fluorescent layer from emitting if no crack develops in the underlying material.
The technique proved particularly useful in a wide variety of fatigue tests of steel components under laboratory conditions. Moreover, it has the potential to be used in various industrial applications. To enable industrial deployment and integration into maintenance strategies, a concept study is developed in this contribution, resulting in a qualification framework that can serve as a foundation for determining the reliability of the crack luminescence system in terms of a probability of detection curve. Within this study, factors causing measurement variability and uncertainty are being determined and their influences assessed. Due to the extension of the system by a moving computer vision system for automated crack detection using artificial intelligence, additional long-term effects associated with structural health monitoring systems need to be incorporated into an extended probability of detection study as part of the technical justification.
Finally, important aspects and findings related to design of experiments are discussed, and a framework for reliability assessment of a new optical crack monitoring method is presented, emphasizing the influence of various uncertainty parameters, including long-term effects such as system ageing.
Almost all building materials in civil engineering have an open porosity and interact with or are affected by the environmental conditions. Structures might suffer from effects such as moisture adsorption, carbonation, corrosion, penetration of salt ions and chemical substances, etc. In the hygroscopic range, these processes are mostly driven by diffusion. Due to the confinement of small pores ( 1 m), the Knudsen effect reduces the molecular diffusion. This reduction can become more significant in case of temporal changing pore systems because of physisorption of water vapor, carbonation, or chemisorption.
In this study, unstabilised earth blocks and earth masonry are investigated. In a first step, the pore size distribution of the blocks is measured and sorption isotherms are recorded in experiments. Besides the ordinary physisorption, the involved clay minerals undergo swelling or shrinking due to chemisorption. The following two effects must be considered: first, the reduction of the available pore space by the adsorbed water layer. For this, the Hillerborg sorption theory is used, which is a combination of the well-known Brunauer-Emmett-Teller sorption theory and the Kelvin equation. This allows the computation of adsorbed water layers even in curved pore geometries. Second, the variation of the initial pore size distribution due to chemisorption needs to be modelled. Based on these two models, the effective diffusion coefficient can be predicted. For validation, arrays of relative humidity sensors were embedded into a free-standing earth masonry wall. This monitoring was carried out over more than a year to have a broad variety of environmental conditions and was located in Berlin, Germany.
The prediction of the effective diffusion coefficient can also be transferred to other processes and allows the investigation of materials having temporarily changing pore systems. Examples are the carbonation of cementitious materials, alkali silica reaction, calcium leaching of long-lasting structures, etc. This effect becomes most prominent in the meso-pore range and might alter the effective diffusion coefficient by more than 100 %.
The soil-foundation-structure interaction is always important when building vibrations due to train passages have to be considered. The frequency range for train vibrations is up to 100 Hz. Normally, soft surface soils are crucial so that the wavelength can be much smaller than the foundation dimensions. Three topics are of interest for the prediction and the under-standing of building vibrations. 1. The „kinematic interaction“ or the „added foundation ef-fect“, which is calculated either by the combined boundary-element finite-element method or by the wavenumber domain method, results in a reduction of the free-field vibration. The stiff-ness of the foundation resists the wave deformation, plates and walls for horizontally propa-gating waves or piles for vertically incident waves. 2. The „inertial interaction“ or the „added building effect“ yields an amplification around the vertical building resonance, which may be a rigid mode on the compliant soil or a flexible mode for high-rise buildings, and a reduction at higher frequencies. This has been analysed by detailed finite element models of apartment and office buildings. 3. Base isolation is a method to further reduce building vibrations. It is important to know the soil-foundation impedance for the possible reduction, as well as the correct building impedance. A high-rise building cannot be considered as a rigid mass model. It has a frequency-dependent behaviour with longitudinal waves travelling from the founda-tion to the top of the building which include the effect of floor vibrations. Experiences from building projects in Vienna, Frankfort and Berlin will give some additional results for the ex-citation from tunnel lines, the kinematic response of pile foundations, and the inertial re-sponse of the flexible multi-storey buildings.
The resonances of railway bridges have often been analysed for short bridges under periodical high-speed trains, for simply supported one-span bridges, for the fundamental bridge mode, and by time-domain analyses. Many time-consuming calculations have been performed to establish simplified rules for standards. In this contribution, the passage of different (existing, new and hypothetic) trains over different bridges will be analysed in frequency domain by using three separated spectra with the purpose to get a better physical insight in the phenomena. At first, the excitation spectrum of the modal forces is built by the mode shape and the passage time of the train over the bridge. The second spectrum is the frequency response function of the bridge which include the modal frequency, damping and mass. The third part is the spectrum of the axle sequence of an arbitrary train which is not limited to periodical or specific (conventional, articulated, regular or standard) trains and which does not include any bridge parameters. The final solution in frequency domain is obtained as the product of these three complex, strongly varying spectra for the dominating bridge mode or in general as the sum of these products over all relevant bridge modes. The time domain solution is obtained via the inverse Fourier transform, and the resulting time histories have been successfully compared with some measurement results. The method is applied to the vertical and torsional modes of a mid-long 1-span bridge on elastomeric bearings under standard train speeds, and to a long multi-span integral bridge under long periodical freight trains. Different resonance and cancellation effects have been found for systematically varied train speeds according to the axle sequence of the whole train which is dominated by the two locomotives in that case. To be more specific, the first torsional mode of the mid-span bridge is excited for a train speed of 100 km/h whereas the second bending mode is excited for a train speed of 160 km/h. In both cases, the other mode is suppressed by the minima of the axle-distance spectra. In addition, the case of the German high-speed train ICE4 and the very high-speed hyperloop case will be discussed briefly. In general, it is shown that resonance effects are also worth to be studied for freight and passenger trains with lower speeds.
Train-induced ground vibrations – The emission and transmission from tunnel and surface lines
(2023)
Train-induced ground vibrations are quite different for tunnel and surface lines. The excitation of the track and ground vibration by the vehicle-track-soil interaction maybe influenced by the stiffer track support of the tunnel invert. The excited waves are propagating on a different path compared to the surface line. The wave propagation in the interior of the soil is calculated by a wavenumber integral in a similar way as the propagation along the surface and a general reduction of < 0.5 has been found. An additional reduction has been found because of the missing Rayleigh wave. The different excitation of tunnel lines is analysed theoretically by the combined finite-element boundary-element method and some results about the influencing tunnel and soil parameters will be shown. Measurements have been made at the Mühlberg-Tunnel in Germany. The vibrations of the train, the track and the soil have been measured simultaneously at the tunnel and a nearby surface line. Spectra will be shown for different train speeds between 60 and 160 km/h. A clear reduction effect for the tunnel line compared to the surface line has been observed in a specific (train-speed-dependent) frequency range. This agrees well with the observations of other research institutes. The mid-frequency tunnel-surface reduction seems to be a consequence of the stiffer track structure which leads to a wider distribution of the axle loads. Therefore, the axle impulses due to the train passage are longer and have a lower frequency content. This will have an effect on the ground vibrations at some distance which are present in case of an irregular transmission path through a ballast and soil with varying stiffness. A similar reduction effect can also be found for other track forms where the axle impulses are distributed on a longer track segment, for example slab tracks, tracks with under ballast plates, under ballast mats or under sleeper pads.
Brücken sind Teil der alternden Verkehrsinfrastruktur. Um die Nutzungsdauer zu verlängern und plötzliche Schäden zu detektieren kann Bauwerksmonitoring ("Structural Health Monitoring") eingesetzt werden. Der Einfluss von Umgebungsbedingungen, beispielsweise der Temperatur, auf das Bauwerksverhalten ist meist größer als der Einfluss von Schäden. Diese Einflüsse bestmöglich voneinander zu trennen und Veränderungen im Tragverhalten korrekt Schäden oder Umgebungsbedingungen zuzuordnen ist eine offene Forschungsfrage. Diese Arbeit zeigt eine mögliche Lösung, bei der gekoppelte Modelle von Umwelteinflüssen, Schäden und Tragverhalten des Bauwerks auf Grundlage von Monitoringdaten aktualisiert werden. Das Framework dazu wird vorgestellt und an einem Laborexperiment eines Stahlbetonbalkens in der Klimakammer angewandt. Die Ergebnisse bestätigen die Vorgehensweise. In nächsten Schritten müssen komplexere Tragwerke und die Sensitivität des Ansatzes untersucht werden.
The aim of the study is to infer the soil stratification from the provided CPT and borehole data. We infer the soil type at any location within the domain of interest from the SBT index Ic (Robertson, 2009). This index can be directly related to the CPT data through an empirical correlation model. In addition, the soil classes contained in the borehole logs can be expressed as bounds on Ic. A log-transformation was applied to Ic, Y = ln(Ic), and Y was modelled by a 3D Random Field, with a fully Bayesian hierarchical Gaussian Process model to explicitly capture uncertainties.
One crucial metric of interest to wind farm operators is the remaining useful life (RUL) of single components, wind turbines, or even entire wind farms. Occasionally, questions arise regarding how to operate a turbine, even in the presence of manufacturing or design errors, which from a computational design standpoint reduce the remaining lifetime below the intended service life. A typical measure involves adapting the monitoring and inspection plan. Using such a maintenance plan, the author intends to simulate the lifetime of jacket-type structure in a fatigue test. The objective of the experiment is to demostrate that systems like three-dimensional jackets possess redundancies that enable reliable continued operation, despite the reduced fatigue life of individual components due to technical flaws, if an appropriate maintenance concept is in place. This presentation discusses the steps leading to the procedure of the experiment including the design process and the maintenance planning.
The attenuation of wave amplitudes is ruled by the planar, cylindrical or spher-ical geometry of the wave front (the geometric or power-law attenuation) but also by the damping of the soil (an exponential attenuation). Several low- and high-frequency filter effects are derived for the layering and the damping of the soil, for the moving static and the distributed train loads and for a homoge-neous or randomly heterogeneous soil. Measurements of hammer- and train-induced vibrations at five sites have been analysed for these attenuation and filter effects. The measured attenuation with distance can be discribed by gen-eralised power laws and some reasons will be discussed. The theoretical filter effects can well be found in the measurements.
Vibration measurements have many causes and many technical and natural sources. Problems can sometimes be solved by short-term measurements, but in many cases, a long-term measurement is necessary. In long-term measurements of days, weeks, months and even years, it is easy to collect a huge quantity of raw data, but at the end, the post-processing of these data can be exhausting (for example one-year vibration data of a wind energy tower). A software has been developed which con-sists of measuring and evaluation routines where the measuring routines can operate different meas-uring systems and different measuring cards. The main advantage of this software is the fact that the interesting evaluations can be integrated in the measuring process so that the characteristics of the vibration can be extracted without storing all the raw data. Only important time segments are stored, for example train passages. The overall concept of the software and the main evaluation routines will be described in some details. Examples of our measurement experience will illustrate the capabilities of the software. 1) Surveying construction work in nearby sensitive buildings (for example an old wind tunnel), including a stable alarm system and meaningful vibration limits. 2) Prediction of train-induced vibration for a planned building to prevent annoyance and to improve the building design. 3) Modal analysis and long term measurements of several single- or multi-span, concrete or steel bridges 4) Modal and wave analysis of coupled floors in a historical building (“Neues Palais” at Potsdam). 5) Soil properties of various measurement sites (different routines to evaluate the dispersion). Moreover, from many projects, amplitudes, frequencies, and attenuation laws have been collected and analysed for the different sources such as vibratory or impact pile driving and ground compaction, demolition work with different machines, blasting in quarries and in tunnel works, bomb and mine clearing.
Usually, geometric irregularities are considered as the main cause of ground vibrations from trains. A varying stiffness of the track, the track support and the soil can also generate ground vibrations. The regular stiffness variation of the track on and between the sleepers results in a deterministic dynamic axle load. The random stiffness variation of the track support yields also dynamic axle loads. The dynamic axle loads are generated by the varying wheel displacements under the static axle load by the acceleration of the unsprung mass of the rail vehicle. The random stiffness variation has a second effect. The pulses from the passage of the static axle loads are superposed regularly to the quasi-static response, but also irregularly to yield a “scattered” part of the axle pulses. The same holds for a random variation of the soil stiffness. All these effects of stiffness variations have been calculated by wavenumber-domain multi-beam track models, a random finite-element soil model and the superposition of axle impulses in a stochastic simulation. The results are confronted with many measurements at different sites. It is concluded that the stiffness variation of the track and the soil generate an important ground vibration component near railway lines.
A simple and fast prediction scheme is presented for train-induced ground and building vibrations. For the emission, finite-element boundary-element or multiple-beam-on-continuous-soil models of the track have been analysed and approximated by faster track-on-Winkler-soil models. The vehicle-track interaction due to irregularities yields the excitation forces. For the transmission of waves in the soil, the wavenumber integral of the compliance of layered soils has been evaluated. The calculation time is reduced for the prediction by using the solution of a homogeneous half-space with a frequency-dependent wave velocity (the dispersion) of the soil. For the immision, many 2 and 3-dimenisonal finite-element building models have been investigated, and a good approximation has been established by a 1-dimensional soil-wall-floor model. In addition, the axle sequence of the train, the quasi-static and the “scattered” response of the soil, and the wave propagation from a tunnel to a pile foundation of a building have been included.
This talk provides a brief overview on some geomechanical phenomena and problematic issues in the field of offshore wind-energy geotechnics, with reference to their associated challenges for a numerical analysis/simulation. These may include large deformations, fluid coupling and grain-scale phenomena, all of which are generally difficult to be addressed with conventional FE techniques.
These challenges are illustrated here with a practical example for the retrofit of axially loaded piles using compaction grouting techniques. In this case, the mechanical effects of the retrofit may be analysed with standard FE techniques, but require the adoption of strong assumptions, while the injection process itself can only be analysed with special techniques such as the MPM.
Finally, an LBM-DEM framework for the micromechanical analysis of such problems is introduced and a practical application for the estimation of the soil resistance to driving (SRD) in layered profiles is discussed.
Es wird eine gekoppelte Finite-Element-Randelementmethode zur Berechnung von Pfahlgrün-dungen in inhomogenen (geschichteten) Böden vorgestellt. Sie beruht auf den Greenschen Funktionen (Punktlastlösungen) für inhomogene Böden. Diese Lösungen können auch für die Wellenausbreitung in der Tiefe, zum Beispiel von einem Bahntunnel zu einem eingebetteten Gebäude, dem Kellergeschoss benutzt werden. Die Punktlastlösungen in der Tiefe werden mit der Halbraumlösung an der Bodenoberfläche und mit der Vollraumlösung verglichen und Gesetzmäßigkeiten für geschichtete Böden abgeleitet. Zu den Pfahlgründungen werden die Horizontalnachgiebigkeiten von Pfählen in geschichteten Böden dargestellt. Für den homoge-nen und den kontinuierlich steifer werdenden Boden werden Potenzgesetze für den Boden- und Pfahleinfluss aufgestellt. Der Vergleich mit dem Winkler-Modell der rein lokalen Boden-reaktion zeigt, dass die Winkler-Bettung in allen Fällen einen zu kleinen Bodeneinfluss ergibt.
Die Definition und Beschreibung der Einfügedämmung im Normentwurf DIN 45673-4 ist noch nicht richtig. Es wird die Beschreibung aus DIN 45673-3 herangezogen, die für Messungen gilt. Für die drei Rechenverfahren gibt es jeweils eine passende Beschreibung. Mit diesen Vorlagen ist eine vernünftige Definition der Einfügungsdämmung zu finden. Es bedarf einer Abgrenzung gegenüber anderen (falschen) Möglichkeiten. Des Weiteren ist der Anhang 2 erweitert und der Parametersatz im Anhang 1 auf das Wesentliche reduziert worden.