7.2 Ingenieurbau
Filtern
Erscheinungsjahr
- 2018 (57) (entfernen)
Dokumenttyp
Schlagworte
- Monitoring (4)
- Repair (4)
- Box-Behnken (3)
- Fatigue (3)
- Grouting (3)
- Interface (3)
- Offshore (3)
- SHM (3)
- Statistical tests (3)
- Acoustic emission testing (2)
- Amplitude-charge weight laws (2)
- Amplitude-distance laws (2)
- Analysis of variance (2)
- Big Data (2)
- Bitumen (2)
- Compressive cyclic loading (2)
- Compressive strength (2)
- Cracks (2)
- DUCON® (2)
- Datenmanagement (2)
- Ductility (2)
- E-modulus (2)
- Elastische Gebäudelagerung (2)
- Energy (2)
- Explosion-induced ground vibrations (2)
- Fault detection (2)
- Grouted Connection (2)
- Hammer impact (2)
- High-strength concrete (2)
- Impact (2)
- Micro-reinforcement (2)
- Mix design (2)
- Mobile elements (2)
- Non-destructive testing (2)
- Numerical model (2)
- Numerical modeling (2)
- Numerical modelling (2)
- Offshore-Windenergieanlagen (2)
- Prediction of explosion induced ground and building vibration (2)
- Quasi-static and dynamic tests (2)
- Rechenmodelle (2)
- Rehabilitation (2)
- Residual evaluation (2)
- Schadensdetektion (2)
- Schwingungsbasierte Verfahren (2)
- Size effect (2)
- Slab track (2)
- Slenderness effect (2)
- Soil properties (2)
- Soil-structure interaction (2)
- Stereo photogrammetry (2)
- Structural Health Monitoring (2)
- Structural health monitoring (2)
- Supplementary cementitious materials (2)
- Track damage (2)
- UHPC (2)
- Ultrasonic testing (2)
- Uncertainty in reference (2)
- Unterraummethoden (2)
- Vibration measurements (2)
- Windenergie (2)
- 3D imaging (1)
- BIM (1)
- Ballast track (1)
- Bauwerk-Boden-Wechselwirkung (1)
- Bayes'sche Analyse (1)
- Beanspruchungszustand (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Boundary element method (1)
- Bridge (1)
- Brücken (1)
- Cohesive soils (1)
- Compaction Grouting (1)
- Compaction grouting (1)
- Conductor (1)
- Crack (1)
- Crack detection (1)
- Crack repair (1)
- Cyclic axial shearing (1)
- DEM-LBM simulation (1)
- Damage detection (1)
- Decision matrix analysis (1)
- Deckenschwingungen (1)
- Design (1)
- Design methods (1)
- Design practice (1)
- Detection (1)
- Digital Image Correlation (1)
- Digital Image Correlation (DIC) (1)
- Dispersionsmessung (1)
- Environmental (1)
- Environmental changes (1)
- Ermüdung (1)
- Ermüdungsschäden (1)
- Erosion (1)
- Erosion of cohesive soils (1)
- Erschütterungsprognose (1)
- Fatigue damage (1)
- Features (1)
- Finite element model updating (1)
- Finite-Elemente-Modellkalibrierung (1)
- Fly ash (1)
- Freileitung (1)
- GPA (1)
- GPU parallelisation (1)
- Geology (1)
- Geomechanics (1)
- Geomechanics of offshore foundations (1)
- Ground vibration measurements (1)
- Grout (1)
- Grout Injection (1)
- HTLS (1)
- Imperfektion (1)
- Innovative Messtechnik (1)
- Inspection planning (1)
- Interface model (1)
- Jet erosion test (1)
- LBM-DEM simulation (1)
- Laminography (1)
- Load bearing behaviour (1)
- Luminescence (1)
- Material Point Method (1)
- Material Point Method (MPM) (1)
- Material model (1)
- Messen im Bauwesen (1)
- Metakaolin (1)
- Microfine cement (1)
- Micromechanical LBM-DEM simulation (1)
- Microsilica (1)
- Mixed formulation (1)
- Offshore Pile Foundation (1)
- Offshore pile foundation (1)
- Offshore pile foundations (1)
- Offshore wind energy (1)
- Offshore wind farms (1)
- Offshore-Wind (1)
- Optimierungsmethoden (1)
- Optimization techniques (1)
- Physical phenomenology (1)
- Piaui state (1)
- Pile Capacity (1)
- Pile foundations (1)
- Pressure (1)
- Probabilitische Ingenieurmodelle (1)
- Randelementmethode (1)
- Recovery experiments (1)
- Reinforced concrete (1)
- Reliability (1)
- Risiko (1)
- Risikoanalyse (1)
- Risk (1)
- Risslumineszenz (1)
- Sandstone (1)
- Santa-marta (1)
- Schrauben (1)
- Schwingungsmessungen (1)
- Serra da cangalha (1)
- Shearing (1)
- Shrinkage (1)
- Soil erosion (1)
- Soil-pile interaction (1)
- State of stress (1)
- Statistical pattern recognition (1)
- Steel structures (1)
- Strength (1)
- Subspace methods (1)
- Subspace-based method (1)
- TOP (1)
- Temperature effect (1)
- Track vibration (1)
- Train configuration (1)
- Train passage (1)
- Train passages (1)
- Tran speed (1)
- Truss structures (1)
- Vibration measurement (1)
- Vibrations (1)
- Viscosity (1)
- Vorspannung (1)
- Wave-Tower interaction (1)
- Wellenfeldberechnung (1)
- Windenergieanlage (1)
- Windfarm wake analysis (1)
- Workability (1)
- Zivile Sicherheit (1)
- fachwerkartige Stahltragwerken (1)
- temperature (1)
Organisationseinheit der BAM
Eingeladener Vortrag
- nein (29)
The local asymptotic approach is promising for vibration-based fault diagnosis when associated to a subspace-based residual function and efficient hypothesis testing tools. It has the ability of detecting small changes in some chosen system parameters. In the residual function,the left null space of the observability matrix associated to a reference model is confronted to the Hankel matrix of output covariances estimated from test data. When this left null space is not perfectly known from a model, it should be replaced by an estimate from data to avoid model errors in the residual computation. In this paper, the asymptotic distribution of the resulting data-driven residual is analyzed and its covariance is estimated, which includes also the covariance related to the reference null space estimate. The advantages of the data-driven residual are demonstrated in a numerical study, and the importance of including the covariance of the reference null space estimate is shown, which increases the detection Performance.
Remediation of Cracks Formed in Grouted Connections of Offshore Energy Structures under Static Loads
(2018)
The future energy demand necessitates the exploration of all potential energy sources both onshore and offshore. Global trend has shifted towards offshore energy, which can be obtained from either carbon intensive or renewable options, hence requiring structures such as rigs, platforms, and monopiles. Most of these structures adopt easily installable construction techniques, where lower foundation need to be connected with the super structure by mean of grouted composite joints. Generally, these composite connections have exterior sleeve, interior pile and infill grout. Being located in remote offshore conditions, connections can experience considerable adverse loading during their lifetimes. Degradations were reported inside similar connections, which were installed in last three decades. Besides, grouting in the offshore sites may often be proven difficult, which eventually leads to reduced capacity of connections in the long run. Thus, repair and rehabilitation of such connections should be planned ahead to minimize operational delays and costs in the future. This study aims at characterizing the nature of crack generation in grouted connections and thereby identifying the potential of repair using suitable repair material. Scaled grouted joints were manufactured using a novel mold, and connections were loaded under static load to visualize the main failure pattern. The failure mechanism and loading capacity are found compatible to previous results from earlier literature. Grouted connection was then repaired using cementitious injectable grout. The effectiveness of the repair system is also discussed.
Repair is an indispensable part of the maintenance of structures over their lifetimes. Structural grouting is a widely used remediation technique for concrete components, trenches, mine subsidence, dam joints, restoration of masonry structures, and geological stabilizations. A structural grout system should be injectable in narrow spaces and hence include ingredients with finer particles. Ultrafine cements are ideal for these type of demanding grouts due to their superior properties compared to that of the less expensive, but coarser ordinary Portland cement (OPC). Supplementary cementitious materials (SCMs) are often used to replace OPC clinker based binder in order to modify certain properties and to reduce costs. The most commonly used SCMs are fly ash (FA), and ground granulated blast furnace slag (GGBS). For various special applications microsilica (MS), and metakaolin (MK) are also used. Identifying the optimum replacement contents of OPC by SCMs are a challenge during the design of such grouts. The aim of this experimental study is to investigate the effect of the selected SCMs (FA, MS and MK) on the slump flow, time of efflux, viscosity, shrinkage, and compressive and flexural strength of ultrafine cement based grouts with constant water-binder ratio and superplasticizer content. The test program was formulated using Box-Behnken design principles. Maximum percentages of replacement with ultrafine cement was 6% by volume of cement for MS and 16% for FA, and MK. The results suggest that most investigated grouts have the potential to be used for structural applications. The appropriate quadratic models are then formulated through statistical tools and presented as response surfaces. The trends indicate that fly ash improves the rheological properties, whereas microsilica and metakaolin positively affect shrinkage and mechanical properties to some extent. Based on the influence of SCMs and priorities among the properties, Decision Matrix Analysis (DMA) is carried out to select the most suitable ones among the SCMs. The analysis suggests that microsilica and fly ash are more suitable as SCMs than metakaolin without affecting the properties.
Grouting is a universal repair and strengthening technique, which is constantly used for structural remediation of concrete components, trenches, mine subsidence, dam joints, restoration of masonry structures, and geological stabilizations. Having an extremely small particle size of only few microns, ultrafine cements are ideal for grouting applications due to their superior permeability and compressive strength properties of the hardened cement paste compared to that of the less-expensive, but coarser ordinary Portland cements. Supplementary cementitious materials (SCMs) are often used to replace ultrafine cement in order to modify certain properties and to reduce costs. The aim of this experimental study is to investigate the effect of three supplementary materials: microsilica (MS), fly ash (FA), and metakaolin (MK) on the workability, and mechanical properties of an ultrafine cement based grout with a constant water-binder ratio and constant superplasticizer content. Maximum percentages of replacement with ultrafine cement were 6% by volume of cement for MS and 16% for FA, and MK. In general, results suggest that the workability is improved by addition of FA, whereas is reduced, when modified with MS and MK. The compressive strength of grout after cement replacement remains comparable to that of pure cement grout. However, there is a tendency of the MS to positively affect the compressive strength opposite to FA, whereas flexural strength is positively affected by FA. Based on the results, it is evident that grouts with Hägerman cone flow more than 500 mm and compressive strength of more than 90 MPa after 28 days can be produced.
Remediation of Cracks Formed in Grouted Connections of Offshore Energy Structures under Static Loads
(2018)
The future energy demand necessitates the exploration of all potential energy sources both onshore and offshore. Global trend has shifted towards offshore energy, which can be obtained from either carbon intensive or renewable options, hence requiring structures such as rigs, platforms, and monopiles. Most of these structures adopt easily installable construction techniques, where lower foundation need to be connected with the super structure by mean of grouted composite joints. Generally, these composite connections have exterior sleeve, interior pile and infill grout. Being located in remote offshore conditions, connections can experience considerable adverse loading during their lifetimes. Degradations were reported inside similar connections, which were installed in last three decades. Besides, grouting in the offshore sites may often be proven difficult, which eventually leads to reduced capacity of connections in the long run. Thus, repair and rehabilitation of such connections should be planned ahead to minimize operational delays and costs in the future. This study aims at characterizing the nature of crack generation in grouted connections and thereby identifying the potential of repair using suitable repair material. Scaled grouted joints were manufactured using a novel mold, and connections were loaded under static load to visualize the main failure pattern. The failure mechanism and loading capacity are found compatible to previous results from earlier literature. Grouted connection was then repaired using cementitious injectable grout. The effectiveness of the repair system is also discussed.
Superplasticizer and shrinkage reducing admixture dosages for microfine cement in grout systems
(2018)
Grouts have numerous applications including crack repair as maintenance in construction industries. Microfine cements are intensively used for high strength mortar and grout products. They are ideal for injection grouting in structural repair. Such grouts should have suitable rheological properties to be injectable, especially those used in repair and rehabilitation. The use of superplasticizers (SP) in these products is thus becoming increasingly crucial to achieve favorable workability and viscosity properties. A difficulty in such grouts is the plastic shrinkage due to finer particles used. It is thus necessary to determine optimum SP and shrinkage reducing admixture (SRA) dosages for a microfine cement based grout. In this study, a saturation dosage was decided from two Polycarboxylate ether (PCE) based SPs in relation to neat cement using slump flow and rheological parameters. A range of grout mixtures was formulated containing micro silica (MS) and fly ash (FA), and tested for suitable rheological and mechanical parameters. Based on the results, a grout mixture with MS and FA was selected to determine optimum SRA content. According to the results, a SP dosage of 3% by weight of neat cement is sufficient to achieve saturation. The grout material including MS and FA can produce comparable properties to neat cement grout. MS is found to improve compressive strength within the range considered, whereas a higher FA content provides favourable rheological properties. Finally, a SRA dosage of 4%, which could reduce the shrinkage by about 43% after 28d days, is determined for the grout system.
Grouting is a universal repair and strengthening technique, which is constantly used for structural remediation of concrete components, trenches, mine subsidence, dam joints, restoration of masonry structures, and geological stabilizations. Having an extremely small particle size of only few microns, ultrafine cements are ideal for grouting applications due to their superior permeability and compressive strength properties of the hardened cement paste compared to that of the less-expensive, but coarser ordinary Portland cements. Supplementary cementitious materials (SCMs) are often used to replace ultrafine cement in order to modify certain properties and to reduce costs. The aim of this experimental study is to investigate the effect of three supplementary materials: microsilica (MS), fly ash (FA), and metakaolin (MK) on the workability, and mechanical properties of an ultrafine cement based grout with a constant water-binder ratio and constant superplasticizer content. Maximum percentages of replacement with ultrafine cement were 6% by volume of cement for MS and 16% for FA, and MK. In general, results suggest that the workability is improved by addition of FA, whereas is reduced, when modified with MS and MK. The compressive strength of grout after cement replacement remains comparable to that of pure cement grout. However, there is a tendency of the MS to positively affect the compressive strength opposite to FA, whereas flexural strength is positively affected by FA. Based on the results, it is evident that grouts with Hägerman cone flow more than 500 mm and compressive strength of more than 90 MPa after 28 days can be produced.