7.2 Ingenieurbau
Filtern
Erscheinungsjahr
- 2023 (44) (entfernen)
Dokumenttyp
- Vortrag (28)
- Beitrag zu einem Tagungsband (10)
- Zeitschriftenartikel (5)
- Buchkapitel (1)
Referierte Publikation
- nein (44) (entfernen)
Schlagworte
- Bahnerschütterungen (3)
- Ground vibration (3)
- Layered soil (3)
- Material moisture (3)
- Offshore (3)
- Shell Buckling (3)
- Wind Energy (3)
- 2-span bridge (2)
- Axle-sequence spectrum (2)
- Bemessung (2)
- Brücken (2)
- Chemisoprtion (2)
- Container loading (2)
- Design methods (2)
- Drop test (2)
- Earth masonry (2)
- Elastische Gleiselemente (2)
- Erschütterungsminderung (2)
- Erschütterungsprognose (2)
- Fatigue (2)
- Foundation load (2)
- Foundations (2)
- Freight train (2)
- Gleiströge (2)
- High-speed train (2)
- Knudsen effect (2)
- Measurements (2)
- Molecular diffusion (2)
- Numerical modelling (2)
- Offshore wind (2)
- Offshore wind turbines (2)
- Passenger train (2)
- Physical phenomenology (2)
- Physical testing (2)
- Physisorption (2)
- Pile foundations (2)
- Railway bridge (2)
- Railway tunnel (2)
- Soil-Structure-Interaction (2)
- Structural Health Monitoring (2)
- Surface-tunnel reduction (2)
- Vibration measurements (2)
- Wind (2)
- Achsimpulse (1)
- Artificial Intelligence (1)
- Attenuation (1)
- Base isolation (1)
- Baugrunddynamik (1)
- Bauwerksmonitoring (1)
- Beton (1)
- Beulen (1)
- Bewertung (1)
- Bodenvariabilität (1)
- Bridge (1)
- Bridges (1)
- Bruchlastwechselzahlen (1)
- Brückensicherheit (1)
- Cars (1)
- Chemisorption (1)
- Computer Vision (1)
- Crack Luminescence (1)
- Damage Detection (1)
- Damage detection (1)
- Digitale Zwillinge (1)
- Druckfestigkeit (1)
- Druckschwellenversuch (1)
- Dynamic loads (1)
- Dynamic soil properties (1)
- Dynamische Bodenkennwerte (1)
- Earth material (1)
- Emission (1)
- End-of-life decision making (1)
- Erhaltungsmanagement (1)
- Ermüdungsverhalten (1)
- Fahrzeug-Fahrweg-Boden-Wechselwirkung (1)
- Fallturm (1)
- Feuchte (1)
- Filter effects (1)
- Flexibility (1)
- Flexible car body (1)
- Flexible wheelset (1)
- Floors (1)
- Footbridge (1)
- Force reconstruction (1)
- Frequency response function (1)
- Hammer impact (1)
- Harter Anprall an Stahlbetonstrukturen (1)
- High-Rise Building (1)
- High-rise buildings (1)
- Impakt (1)
- Inertial Interaction (1)
- Inertial interaction (1)
- Inspeciton (1)
- Jacket support structure (1)
- Kinematic Interaction (1)
- Kinematic interaction (1)
- Lehm (1)
- Load Test (1)
- Long-span bridge (1)
- Maintal Bridge Gemuenden (1)
- Maintenance (1)
- Mauerwerk (1)
- Modal force spectrum (1)
- Modal load spectrum (1)
- Modal system identification (1)
- Model updating (1)
- Monitoring (1)
- Monopile (1)
- Monopiles (1)
- Movin load test (1)
- Non-Destructive Evaluation (1)
- Normung (1)
- Numerical analysis (1)
- Offshore Wind (1)
- Offshore wind energy (1)
- Offshore wind-turbine foundations (1)
- Operational modal analysis (1)
- Pfahlfußbeulen (1)
- Physisoprtion (1)
- Pile Buckling (1)
- Pile Foundation (1)
- Pile Tip Buckling (1)
- Pile groups (1)
- Probabilistic (1)
- Probability of Detection (1)
- Probekörpergeometrien (1)
- Prädiktive Instandhaltung (1)
- Railbridge (1)
- Railway (1)
- Railway tracks (1)
- Randomly heterogeneous soil (1)
- Reliability (1)
- Repowering (1)
- Rigid vehicle model (1)
- Risk-based maintenance planning (1)
- Road bridges (1)
- SHM (1)
- Safety (1)
- Scattering (1)
- Scherwellengeschwindigkeit (1)
- Schubmodul (1)
- Sicherheit (1)
- Simulation and experiment (1)
- Site-characterization (1)
- Soil Struture Interaction (1)
- Soil-pile interaction (1)
- Soil-structure interaction (1)
- Stabilität (1)
- Statistical correlations (1)
- Statistische Auswertung (1)
- Statistische Korrelationen (1)
- Structural health monitoring (1)
- Structural integrity (1)
- Structural integrity management (1)
- Störgrößen (1)
- Substructures (1)
- Surface Foundation (1)
- System identification (1)
- Tip Buckling (1)
- Train passage (1)
- Transfer fuction (1)
- Transfer function (1)
- Tunnelstrecke (1)
- Umwelteinflüsse (1)
- Vibrations (1)
- Wahrscheinlichkeit (1)
- Water-structure interaction (1)
- Wellenausbreitung (1)
- Wind turbines (1)
- Wind-farm aerodynamics (1)
- Windenergie (1)
- Windenergy (1)
- Zerstreute Achsimpulse (1)
- Zuverlässigkeit (1)
- zerstreute Achslastimpulse (1)
Organisationseinheit der BAM
- 7.2 Ingenieurbau (44) (entfernen)
Eingeladener Vortrag
- nein (28)
The aim of the study is to infer the soil stratification from the provided CPT and borehole data. We infer the soil type at any location within the domain of interest from the SBT index Ic (Robertson, 2009). This index can be directly related to the CPT data through an empirical correlation model. In addition, the soil classes contained in the borehole logs can be expressed as bounds on Ic. A log-transformation was applied to Ic, Y = ln(Ic), and Y was modelled by a 3D Random Field, with a fully Bayesian hierarchical Gaussian Process model to explicitly capture uncertainties.
Die heute in der Anwendung befindlichen Bemessungskonzepte für Ermüdung von Beton stammen zum Teil noch aus den 1990er Jahren und sind speziell hinsichtlich hochfester Betone konservativ ausgelegt. Um die Vorteile von Türmen für Windkraftanlagen, vor allem auch aus hochfesten Betonen, im Zuge des geplanten Ausbaus der Windenergieversorgung in Deutschland wirtschaftlich nutzbar zu machen, müssen diese Bemessungskonzepte weiterentwickelt werden. Dafür sind umfangreiche Untersuchungen zur Ermittlung von Bruchlastwechselzahlen und zur Charakterisierung der Schädigungsentwicklung unter Ermüdungsbeanspruchung erforderlich. Allgemein anerkannte bzw. verbindliche Regelwerke oder Verfahren zur experimentellen Bestimmung der Ermüdungsfestigkeit (Bruchlastwechselzahlen) an Betonproben gibt es zurzeit aber nicht und die bisher durchgeführten Untersuchungen variieren in Parametern wie Probengeometrie, Probengröße und Prüffrequenz. Eine vergleichende Analyse der Ergebnisse der Studien und insbesondere die Übertragbarkeit auf bauteilrelevante Abmessungen ist auf dieser Grundlage nur sehr eingeschränkt möglich.
A significant number of new wind farms has to be installed and, at the same time, existing wind farms reaching the end of their planned life need to be reused efficiently to ensure that the ambitous goals for deploying offshore wind are met. Some relevant reuse alternatives for offshore wind farms are lifetime extension, repowering utilizing existing substructures and full replacement. In this presentation - starting from experience gained from extending the lifetime of the of the U1 metro viaduct in Berlin - we discuss end-of-life decision making in offshore wind. We focus particularly on issues concerning substructures and highlight existing challenges and opprtunities in research and development.
Nowadays geotechnical engineering firms have powerful software tools to extent their consulting business also into dynamic soil-structure interaction, which before has been restricted to a rather small community of specialized experts in this field, and they certainly do. This is particularly true with respect to non-seismic sources, that is all kinds of human induced vibrations. Hence, there is a demand from clients as well as from contractors to have guidance on the requirements as well as the limits of numerical modelling of soil-structure interaction. From the literature as well as from relevant standards, recommendations for the numerical modelling of soil-structure interaction problems involving seismic actions are well known, e. g. ASCE/SEI 4-16. There are, however, some particularities when dealing with human-induced vibrations, which are absent in seismic analyses. For human-induced excitations very little specific guidance has been published in the past. A machine foundation on a homogeneous half space excited by harmonic loads with excitation frequency between 4 Hz and 64 Hz has been analysed by means of several commercially available software packages. Parametric studies have been performed to verify if recommendations for seismic soil-structure analyses are valid for non-seismic analyses as well. This paper provides details on the benchmark example and the most important conclusions from the undertaken parametric studies.
Current standards like ISO 14837-32:2015 and DIN EN 1998-1/NA:2021 as well as prEN 1997-2:2022 allow for using correlations between the results of in-situ soil penetration tests and shear wave velocity (or shear modulus) to determine soil properties to be used in dynamic analyses. While the ISO and prEN standards even provide some recommendations on specific correlations to be used, the DIN standard does not. Due to the statistical nature of such correlations their general applicability has to be verified. We collected data sets from test sites from Germany as well as New Zealand at which cone penetration tests (CPT) as well as seismic site investigation methods were conducted. These sites comprise sandy soils as well as clayey soils, mixed soils as well as glacial soils. We compare the results of several correlations between CPT results and shear wave velocity. The accuracy of such correlations is assessed with respect to the accuracy of seismic in-situ tests. It turns out that for clean sands such correlations between CPT and Vs have a similar order of variability as seismic in-situ tests conducted at the same site. The higher the fines portion of the soil, the higher the variability of the statistical correlations, and consequently the less the general applicability. For glacial soils and other special soil types usage of statistical correlations to determine dynamic soil properties is not recommended.
Wir zeigen, dass bei homogenen ausgeprägt sandartigen Böden mit statistisch ermittelten Korrelationen die dynamischen Bodensteifigkeiten mit einer Genauigkeit abgeschätzt werden können, die mit der Ungenauigkeit der seismischen Verfahren übereinstimmt. Mit zunehmenden Feinkornanteil werden die Unsicherheiten der statistischen Korrelationen größer. Bei stark überkonsolidierten glazialen Böden sollte von der Anwendung empirischer Korrelationen Abstand genommen werden.
The Federal Institute of Material Research and Testing has performed many impact tests from very small laboratory tests to very big “free-field” tests with heavy containers on stiff foundations. The first measurements have been done on a big foundation where it should be guaranteed that the foundation is rigid and the container is tested properly. Later on, a smaller drop test facility has been built on the ground inside an existing building. It had to be controlled by prediction and measurements that the drop test will not damage the building. Tests from different heights on soft, medium, and stiff targets have been done to find out rules which allow to identify acceptable and unacceptable drop tests. Later on, the biggest drop test facility has been built for masses up to 200 t. It was necessary for the design of the foundation to estimate the forces which oc-cur during the drop tests. In addititon, the acceptable tests should be selected and controlled by measurements where the impact duration is important. Dif-ferent sensors, accelerometers, accelerometers with mechanical filters, geo-phones (velocity transducers), strain gauges, and pressure cells have been ap-plied for these tasks. Signal transformations and model calculations have been used to check and understand the dynamic measurements. The simplest law is the conservation of the momentum which is a good approximation if the impact is short. If the soil under the foundation has an influence on the deceleration of the container, the maximum foundation velocity is lower than the simple esti-mation.
The Federal Institute of Material Research and Testing has performed many impact tests from very small laboratory tests to very big “free-field” tests with heavy containers on stiff foundations. The first measurements have been done on a big foundation where it should be guaranteed that the foundation is rigid and the container is tested properly. Later on, a smaller drop test facility has been built on the ground inside an existing building. It had to be controlled by prediction and measurements that the drop test will not damage the building. Tests from different heights on soft, medium, and stiff targets have been done to find out rules which allow to identify acceptable and unacceptable drop tests. Later on, the biggest drop test facility has been built for masses up to 200 t. It was necessary for the design of the foundation to estimate the forces which oc-cur during the drop tests. In addititon, the acceptable tests should be selected and controlled by measurements where the impact duration is important. Dif-ferent sensors, accelerometers, accelerometers with mechanical filters, geo-phones (velocity transducers), strain gauges, and pressure cells have been ap-plied for these tasks. Signal transformations and model calculations have been used to check and understand the dynamic measurements. The simplest law is the conservation of the momentum which is a good approximation if the impact is short. If the soil under the foundation has an influence on the deceleration of the container, the maximum foundation velocity is lower than the simple esti-mation.
Monopile-Gründungen sind die mit Abstand am häufigsten verwendete Gründungskonstruktion für Offshore-Windenergieanlagen. Ein wesentliches Problem bei der Bemessung ist das lokale Beulen des Gründungspfahls, welches typischerweise im Bereich der Bettung auftritt. Aufgrund der Nichtlinearität der Bettungsrandbedingung sind klassische Bemessungsansätze nicht anwendbar, so dass der Bemessungsingenieur auf eine vollständig numerische Berechnung zurückgreifen muss. In diesem Vortrag wird eine experimentelle Versuchskampagne zur Erzeugung von Kalibrierungsdaten für solche numerischen Modelle vorgestellt. Eine ausführlichere Darstellung findet sich im gleichnamigen Artikel.
Almost all building materials in civil engineering have an open porosity and interact with or are affected by the environmental conditions. Structures might suffer from effects such as moisture adsorption, carbonation, corrosion, penetration of salt ions and chemical substances, etc. In the hygroscopic range, these processes are mostly driven by diffusion. Due to the confinement of small pores (less than1 µm), the Knudsen effect reduces the molecular diffusion. This reduction can become more significant in case of temporal changing pore systems because of physisorption of water vapor, carbonation, or chemisorption.
In this study, unstabilised earth blocks and earth masonry are investigated. In a first step, the pore size distribution of the blocks is measured and sorption isotherms are recorded in experiments. Besides the ordinary physisorption, the involved clay minerals undergo swelling or shrinking due to chemisorption. The following two effects must be considered: first, the reduction of the available pore space by the adsorbed water layer. For this, the Hillerborg sorption theory is used, which is a combination of the well-known Brunauer-Emmett-Teller sorption theory and the Kelvin equation. This allows the computation of adsorbed water layers even in curved pore geometries. Second, the variation of the initial pore size distribution due to chemisorption needs to be modelled. Based on these two models, the effective diffusion coefficient can be predicted. For validation, arrays of relative humidity sensors were embedded into a free-standing earth masonry wall. This monitoring was carried out over more than a year to have a broad variety of environmental conditions and was located in Berlin, Germany.
The prediction of the effective diffusion coefficient can also be transferred to other processes and allows the investigation of materials having temporarily changing pore systems. Examples are the carbonation of cementitious materials, alkali silica reaction, calcium leaching of long-lasting structures, etc. These effects are prominent in the meso-pore range and might significantly alter the effective diffusion coefficient.