7.2 Ingenieurbau
Filtern
Erscheinungsjahr
- 2018 (48) (entfernen)
Dokumenttyp
Referierte Publikation
- nein (48) (entfernen)
Schlagworte
- Monitoring (4)
- Repair (4)
- Fatigue (3)
- Interface (3)
- Acoustic emission testing (2)
- Amplitude-charge weight laws (2)
- Amplitude-distance laws (2)
- Analysis of variance (2)
- Big Data (2)
- Bitumen (2)
- Box-Behnken (2)
- Compressive cyclic loading (2)
- Compressive strength (2)
- Cracks (2)
- DUCON® (2)
- Datenmanagement (2)
- Ductility (2)
- E-modulus (2)
- Energy (2)
- Explosion-induced ground vibrations (2)
- Grouted Connection (2)
- Grouting (2)
- Hammer impact (2)
- High-strength concrete (2)
- Impact (2)
- Micro-reinforcement (2)
- Mobile elements (2)
- Non-destructive testing (2)
- Numerical model (2)
- Numerical modeling (2)
- Numerical modelling (2)
- Offshore (2)
- Offshore-Windenergieanlagen (2)
- Prediction of explosion induced ground and building vibration (2)
- Quasi-static and dynamic tests (2)
- Rehabilitation (2)
- SHM (2)
- Schadensdetektion (2)
- Schwingungsbasierte Verfahren (2)
- Size effect (2)
- Slab track (2)
- Slenderness effect (2)
- Soil properties (2)
- Soil-structure interaction (2)
- Stereo photogrammetry (2)
- Structural Health Monitoring (2)
- Supplementary cementitious materials (2)
- Track damage (2)
- UHPC (2)
- Ultrasonic testing (2)
- Unterraummethoden (2)
- Windenergie (2)
- 3D imaging (1)
- BIM (1)
- Ballast track (1)
- Bauwerk-Boden-Wechselwirkung (1)
- Bayes'sche Analyse (1)
- Beanspruchungszustand (1)
- Betonautobahn (1)
- Betonautobahnen (1)
- Boundary element method (1)
- Brücken (1)
- Cohesive soils (1)
- Compaction Grouting (1)
- Conductor (1)
- Crack (1)
- Crack detection (1)
- Crack repair (1)
- Cyclic axial shearing (1)
- DEM-LBM simulation (1)
- Deckenschwingungen (1)
- Design (1)
- Design methods (1)
- Design practice (1)
- Detection (1)
- Digital Image Correlation (1)
- Dispersionsmessung (1)
- Elastische Gebäudelagerung (1)
- Environmental (1)
- Ermüdungsschäden (1)
- Erosion (1)
- Erosion of cohesive soils (1)
- Erschütterungsprognose (1)
- Fatigue damage (1)
- Fault detection (1)
- Finite element model updating (1)
- Finite-Elemente-Modellkalibrierung (1)
- Freileitung (1)
- GPU parallelisation (1)
- Geomechanics (1)
- Geomechanics of offshore foundations (1)
- Ground vibration measurements (1)
- Grout (1)
- Grout Injection (1)
- HTLS (1)
- Innovative Messtechnik (1)
- Inspection planning (1)
- Interface model (1)
- Jet erosion test (1)
- LBM-DEM simulation (1)
- Laminography (1)
- Load bearing behaviour (1)
- Luminescence (1)
- Material Point Method (1)
- Material model (1)
- Messen im Bauwesen (1)
- Microfine cement (1)
- Micromechanical LBM-DEM simulation (1)
- Mix design (1)
- Offshore Pile Foundation (1)
- Offshore pile foundations (1)
- Offshore wind energy (1)
- Offshore wind farms (1)
- Offshore-Wind (1)
- Optimierungsmethoden (1)
- Optimization techniques (1)
- Physical phenomenology (1)
- Pile Capacity (1)
- Pile foundations (1)
- Probabilitische Ingenieurmodelle (1)
- Randelementmethode (1)
- Rechenmodelle (1)
- Reinforced concrete (1)
- Reliability (1)
- Residual evaluation (1)
- Risiko (1)
- Risikoanalyse (1)
- Risk (1)
- Risslumineszenz (1)
- Schwingungsmessungen (1)
- Shearing (1)
- Shrinkage (1)
- Soil erosion (1)
- Soil-pile interaction (1)
- State of stress (1)
- Statistical tests (1)
- Steel structures (1)
- TOP (1)
- Track vibration (1)
- Train configuration (1)
- Train passage (1)
- Train passages (1)
- Tran speed (1)
- Truss structures (1)
- Uncertainty in reference (1)
- Vibration measurement (1)
- Vibration measurements (1)
- Wave-Tower interaction (1)
- Wellenfeldberechnung (1)
- Windfarm wake analysis (1)
- Zivile Sicherheit (1)
- fachwerkartige Stahltragwerken (1)
Organisationseinheit der BAM
- 7.2 Ingenieurbau (48) (entfernen)
Eingeladener Vortrag
- nein (29)
Mit der Errichtung und der Inbetriebnahme des Windpark alpha ventus wurden umfangreiche Messungen an den Tragstrukturen und den Umgebungsparametern durchgeführt. Im Projekt Gigawind life wurde im TP1 ein Datenmanagementsystem zur kontinuierlichen und periodisch fortgeführten Datenauswertung für große Datenbestände (Big Data) entworfen und realisiert. Anhand von Performanceuntersuchungen konnte eine Verkürzung der Rechenzeit um den Faktor 10 in einem Rechencluster erreicht werden. Unter Anwendung einer Datenpipeline nach dem Publish/Subscribe Prinzip wird eine skalierbare Datenschnittstelle für Monitoringdaten vorgeschlagen.
Superplasticizer and shrinkage reducing admixture dosages for microfine cement in grout systems
(2018)
Grouts have numerous applications including crack repair as maintenance in construction industries. Microfine cements are intensively used for high strength mortar and grout products. They are ideal for injection grouting in structural repair. Such grouts should have suitable rheological properties to be injectable, especially those used in repair and rehabilitation. The use of superplasticizers (SP) in these products is thus becoming increasingly crucial to achieve favorable workability and viscosity properties. A difficulty in such grouts is the plastic shrinkage due to finer particles used. It is thus necessary to determine optimum SP and shrinkage reducing admixture (SRA) dosages for a microfine cement based grout. In this study, a saturation dosage was decided from two Polycarboxylate ether (PCE) based SPs in relation to neat cement using slump flow and rheological parameters. A range of grout mixtures was formulated containing micro silica (MS) and fly ash (FA), and tested for suitable rheological and mechanical parameters. Based on the results, a grout mixture with MS and FA was selected to determine optimum SRA content. According to the results, a SP dosage of 3% by weight of neat cement is sufficient to achieve saturation. The grout material including MS and FA can produce comparable properties to neat cement grout. MS is found to improve compressive strength within the range considered, whereas a higher FA content provides favourable rheological properties. Finally, a SRA dosage of 4%, which could reduce the shrinkage by about 43% after 28d days, is determined for the grout system.
This presentation deals with the phenomenology and design of pile foundations for offshore wind turbines, and is divided in two lectures.
The first lecture presents a brief introduction to the context and peculiarities of such foundations, and then focuses on the particular case of axially loaded piles. This part is most relevant for the relatively slender piles of the multi-pile substructures (i.e. jackets and tripods). A clear distinction between physical phenomenology and practical design is drawn here.
The second lecture continues with the case of lateraly loaded offshore piles, which bears most relevance for the case of the monopile foundations. Here again, a clear separation between physical reality and design methods is intended.
Finally, the last part of the second lecture introduces several advanced topics which lie outside the classical design approaches, namely the cyclic pile fatigue and the so-called pile setup (i.e. the time effects on the axial pile capacity). The relevance of these two topics is illustrated with experimental results from a field testing campaign on real large-scale piles.
This talk provides a brief introduction on general engineering aspects of offshore wind energy production. Some geomechanical issues for the foundation of OWTs into the seabed are introduced, while the results from experimental investigations and coupled computational analysis are discussed.
In the second part of the seminar, the hydromechanical Wave–Tower interaction is firstly discussed. Then, some general aspects of the windfarm aerodynamics are introduced. On the one hand, some modelling possibilities for the wake analysis of single turbines and turbine groups are discussed. And on the other hand the relevance of such analyses for a proper windfarm layout optimization is pointed out.
Concerning the geomechanical issues the talk shows that: i) The pile’s bearing capacity can degrade under cyclic loading (waves, wind, …). ii) The time effects can be relevant: Capacity improvement can be substantial, but also fragile. iii) There are cyclic PWP effects: Cyclic interaction with pore water may lead to soil softening and an uncoupled analysis (current design practice) is potentially unsafe.
And concerning the hydromechanical and aerodynamical design considerations, this seminar shows that: i) Numerical analysis of turbine’s interaction with wind/waves is useful and affordable. ii) Simplified models can provide insight into windfarm aerodynamics. iii) Turbulent wake analysis is very relevant for the windfarm layout.
The erosion phenomena is the main cause of the most serious incidents observed on earthen hydraulic structures such as dams and dikes. Thus, there is a real need to explore in depth and understand the mechanisms at work in such complex erosional processes for preventing similar risks.
The aim of this study is to provide a micromechanical insight into the mechanisms taking place during the erosion of a cohesive granular material driven by a fluid flow, the objectives are summarized as follows:
Perform numerical erosion tests.
Parallelization of the code (Gpu).
Extensive parametric analysis => rely micro parameters (eg. Cohesion) to macro parameters (eg. Soil erodibility, mechanical strengths).
Use of DEM-LBM modeling to prove the relevance of free jet model for soil erosion by impinging jet
(2018)
The aim of this study is to provide a micromechanical insight into the mechanisms taking place during the erosion of a cohesive granular material driven by a fluid flow, the objectives are summarized as follows:
Perform numerical erosion tests.
Parallelization of the code (Gpu).
Extensive parametric analysis => rely micro parameters (eg. Cohesion) to macro parameters (eg. Soil erodibility, mechanical strengths).
Grouting is a universal repair and strengthening technique, which is constantly used for structural remediation of concrete components, trenches, mine subsidence, dam joints, restoration of masonry structures, and geological stabilizations. Having an extremely small particle size of only few microns, ultrafine cements are ideal for grouting applications due to their superior permeability and compressive strength properties of the hardened cement paste compared to that of the less-expensive, but coarser ordinary Portland cements. Supplementary cementitious materials (SCMs) are often used to replace ultrafine cement in order to modify certain properties and to reduce costs. The aim of this experimental study is to investigate the effect of three supplementary materials: microsilica (MS), fly ash (FA), and metakaolin (MK) on the workability, and mechanical properties of an ultrafine cement based grout with a constant water-binder ratio and constant superplasticizer content. Maximum percentages of replacement with ultrafine cement were 6% by volume of cement for MS and 16% for FA, and MK. In general, results suggest that the workability is improved by addition of FA, whereas is reduced, when modified with MS and MK. The compressive strength of grout after cement replacement remains comparable to that of pure cement grout. However, there is a tendency of the MS to positively affect the compressive strength opposite to FA, whereas flexural strength is positively affected by FA. Based on the results, it is evident that grouts with Hägerman cone flow more than 500 mm and compressive strength of more than 90 MPa after 28 days can be produced.