7.2 Ingenieurbau
Filtern
Dokumenttyp
- Beitrag zu einem Tagungsband (66) (entfernen)
Sprache
- Englisch (66) (entfernen)
Schlagworte
- Ground vibration (6)
- Structural health monitoring (6)
- Fatigue (5)
- Model interpolation (4)
- Vibration measurements (4)
- Building vibration (3)
- Damage localization (3)
- Hammer impact (3)
- Impact (3)
- Layered soil (3)
- Reliability (3)
- Structural Health Monitoring (3)
- Temperature rejection (3)
- Bayesian updating (2)
- Cable failure (2)
- Cable-stayed bridge (2)
- Container loading (2)
- Damage characterization (2)
- Drop test (2)
- Environmental effects (2)
- Fault detection (2)
- Foundation load (2)
- Grout (2)
- High-strength concrete (2)
- Inspection planning (2)
- Interface (2)
- Linear parameter varying systems (2)
- Load vector (2)
- Offshore (2)
- Planar tomography (2)
- Repair (2)
- Risk (2)
- SDDLV (2)
- Soil-structure interaction (2)
- Soil-wall-floor model (2)
- Statistical evaluation (2)
- Structural systems (2)
- Subspace-based method (2)
- Subspace-based residual (2)
- Train passage (2)
- Train-induced ground vibration (2)
- Ultrasonic testing (2)
- Vehicle-track interaction (2)
- Wind (2)
- 2-span bridge (1)
- Achsfolgespektren (1)
- Acoustic emission testing (1)
- Amplitude-charge weight laws (1)
- Amplitude-distance laws (1)
- Analysis of variance (1)
- Analytical Design Methods (1)
- Ansys Autodyn (1)
- Apartment building (1)
- Artificial Intelligence (1)
- Artificial intelligence (1)
- Attenuation (1)
- Autonomous underwater vehicles (1)
- Axle impulses (1)
- Axle loads (1)
- Axle-sequence spectrum (1)
- BIM (1)
- Bauteile (1)
- Bauwerke (1)
- Bayesian System Identification (1)
- Bayesian methods (1)
- Bayesian system identification (1)
- Box-Behnken (1)
- Bridges (1)
- Brücken (1)
- Changing process noise (1)
- Chemisoprtion (1)
- Climate chamber (1)
- Column/wall resonance (1)
- Compaction Grouting (1)
- Compaction grouting (1)
- Compressive Cyclic loading (1)
- Compressive cyclic loading (1)
- Compressive strength (1)
- Computer Vision (1)
- Conductor (1)
- Coupler systems (1)
- Crack Luminescence (1)
- Crack detection (1)
- Crack formation (1)
- Crack growth (1)
- Crack pattern (1)
- Cracks (1)
- Cyber security (1)
- Cyclic load (1)
- DEM (1)
- DUCON® (1)
- Damage detection (1)
- Damage identification (1)
- Deterioration (1)
- Digital Image Correlation (DIC) (1)
- Digital Models (1)
- Digital twin (1)
- Displacements (1)
- Drone (1)
- Drop Tests (1)
- Drop tower (1)
- Drucker-Prager (1)
- Ductility (1)
- E-modulus (1)
- Earth masonry (1)
- Energy (1)
- Environmental changes (1)
- Evaluation (1)
- Excitation forces (1)
- Explosion-induced ground vibrations (1)
- Fault detectionchanging (1)
- Filter effects (1)
- Finite element models (1)
- Floor resonance (1)
- Foundation Pile (1)
- Foundation reliability analysis (1)
- Freight train (1)
- Freileitung (1)
- Granular Cohesive Materials (1)
- Ground vibration measurements (1)
- Grouted Connection (1)
- Grouted connection (1)
- Grouting (1)
- HAZID (1)
- HTLS (1)
- Hard impact (1)
- High-Rise Building (1)
- High-speed (1)
- High-speed train (1)
- Horizontal stress (1)
- Impact damage on reinforced concrete (1)
- Inertial Interaction (1)
- Injection Sequence (1)
- Inspection (1)
- Irregular ballast (1)
- Irregular soil (1)
- Irregularities (1)
- Kinematic Interaction (1)
- Knudsen effect (1)
- Laboratory beam structure (1)
- Layered soils (1)
- Long-span bridge (1)
- Macromechanical Sample Strength (1)
- Material Point Method (MPM) (1)
- Material moisture (1)
- Material tests (1)
- Measurement (1)
- Measurements (1)
- Micro-reinforcement (1)
- Microfine Cement (1)
- Micromechanical Tensile Failure (1)
- Mixed formulation (1)
- Mobile elements (1)
- Modal Analysis (1)
- Modal force spectrum (1)
- Modalanalyse (1)
- Modes (1)
- Molecular diffusion (1)
- Monitoring (1)
- Monopile installation risks (1)
- Multiple impact (1)
- NDT (1)
- Non destructive testing (1)
- Non-Destructive Evaluation (1)
- Non-destructive testing (1)
- Numeric simulation (1)
- Numerical damage simulation (1)
- Numerical modeling (1)
- Numerical modelling (1)
- Office building (1)
- Office tower (1)
- Offshore Pile Foundation (1)
- Offshore Wind Energy (1)
- Offshore foundations (1)
- Offshore pile foundation (1)
- Offshore steel structures (1)
- Offshore wind turbines (1)
- Optimal Sensor Placement (1)
- Passenger train (1)
- Physisorption (1)
- Pile Foundation (1)
- Post-impact evaluation (1)
- Prediction of explosion induced ground and building vibration (1)
- Probabilistic modelling (1)
- Probability of Detection (1)
- Process noise (1)
- Propagation from a tunnel (1)
- Quasi-static and dynamic tests (1)
- Railway (1)
- Railway bridge (1)
- Railway tunnel (1)
- Randomly heterogeneous soil (1)
- Rehabilitation (1)
- Reinforced concrete structure (1)
- Reinforcement (1)
- Research data management (1)
- Residential building (1)
- Residual evaluation (1)
- Risk-based design (1)
- SHM (1)
- SHM environmental bridges (1)
- Safety (1)
- Scattering (1)
- Shearing (1)
- Shell Buckling (1)
- Shrinkage Reducing Admixture (1)
- Simple prediction (1)
- Size effect (1)
- Slab track (1)
- Slenderness effect (1)
- Soft impact (1)
- Soil properties (1)
- Soil-Structure-Interaction (1)
- Soil-building interaction (1)
- Soil-building resonance (1)
- Soil-pile interaction (1)
- Spatially varying ground conditions (1)
- Static load (1)
- Statistical method (1)
- Statistical tests (1)
- Steel structures (1)
- Stereo photogrammetry (1)
- Subspace methods (1)
- Superplasticizer (1)
- Supplementary Cementitious Materials (1)
- Supplementary cementitious materials (1)
- Surface Foundation (1)
- Surface-tunnel reduction (1)
- System Identification (1)
- Temperature effects (1)
- Tensile Capacity (1)
- Time-variant reliability (1)
- Tomographic damage evaluation (1)
- Train speed (1)
- Transfer function (1)
- Tunnel-pile transfer (1)
- UHPC (1)
- Uncertainty (1)
- Uncertainty in reference (1)
- Value of Information (1)
- Varying stiffness (1)
- Vehicle-track-soil interaction (1)
- Vibration (1)
- Vibration measurement (1)
- Waves (1)
- Welded (1)
- Wind Energy (1)
- Wind Turbines (1)
- temperature (1)
Organisationseinheit der BAM
- 7.2 Ingenieurbau (66) (entfernen)
Reinforced concrete (RC) is used as structural material in most diverse civil engineering applications. For the variability of its physical properties it is still an engineering challenge to meet all necessary requirements for the prediction of dynamic effects under impact loading. In this paper, investigations are shown within the scope of quantifying and evaluating the damage caused by an impact. The experimental investigations are performed in the field of low- and medium-velocity impact. The chosen flat nose shape results in small penetrations on the top side and scabbing on the bottom side. The plate is scanned with an adapted planar tomographic examination after the impact, and the damage is analysed, afterwards. Cracks and spalling are made visible with a reconstruction. The numerical model validated on the tomographic results justifies the application for further predictions of the damage description.
Prediction of dynamic effects of reinforced concrete structures under impact loading is a technical challenge. This is a consequence of the great variability of the physical properties resulting from the wide adaptability of reinforced concrete and a consequence of the wide range of impact loading. Experiments and numerical investigations are normally used on a small scale to address the problem. In this paper, impact tests on reinforced conrete plates with the lateral dimensions of 1.5 m x 1.5 m and a thickness of 30 cm are presented. In bending reinforcement, besides the velocity two properties are varied, the diameter and the spatial distribution of the rebars. Experiments are performed at the Otto-Mohr-Laboratory of the Institute of Concrete Structures of the Technische Universit¨at Dresden. Due to the accelerated fall of the impactor the velocity ranges between 20 and 70 m/s. In addition to the measured quantities such as bearing forces, accelerations are also measured at 4 different positions on and under the plate, as well as the deflection at several positions. The measured data are used for the analysis of the damage form and the numerical examinations with the program Ansys Autodyn and the material model after Drucker-Prager.
Numerical investigations support the tests, with detailed analysis of individual effects. These numerical computations and the planar tomographic investigations were carried out at BAM in Berlin. With the help of planar tomographic evaluation, the damaged structure is
made visible and compared with the numerical results. Influences of the bending reinforcement are explained on the basis of damage evaluation in the local area and on selected measured values. In addition to the test evaluation, the tomographic and numerical methods are presented.
Early detection of fatigue cracks and accurate measurements of the crack growth play an important role in the maintenance and repair strategies of steel structures exposed to cyclic loads during their service life. Observation of welded connections is especially of high relevance due to their higher susceptibility to fatigue damage. The aim of this contribution was to monitor fatigue crack growth in thick welded specimens during fatigue tests as holistically as possible, by implementing multiple NDT methods simultaneously in order to record the crack initiation and propagation until the final fracture. In addition to well-known methods such as strain gauges, thermography, and ultrasound, the crack luminescence method developed at the Bundesanstalt für Materialforschung und -prüfung (BAM), which makes cracks on the surface particularly visible, was also used. For data acquisition, a first data fusion concept was developed and applied in order to synchronize the data of the different methods and to evaluate them to a large extent automatically. The resulting database can ultimately also be used to access, view, and analyze the experimental data for various NDT methods. During the conducted fatigue tests, the simultaneous measurements of the same cracking process enabled a comprehensive comparison of the methods, highlighting their individual strengths and limitations. More importantly, they showed how a synergetic combination of different NDT methods can be beneficial for implementation in large-scale fatigue testing but also in monitoring and inspection programs of in-service structures - such as the support structures of offshore wind turbines.
In case one wants to predict or design the bearing capacity of a foundation pile and there are no possibilities to perform an in-situ test, such as a Cone Penetration Test, the pile bearing capacity is in most cases estimated with analytical formulas. The most known and used method is the Meyerhof method published some decades ago. There are also other design methods such as derived from a certain failure mechanism around the pile tip, which is, in most cases, wedge failure mechanism. This failure mechanism was originally developed for a shallow (infinite) strip foundation, though. Therefore, it represents a plane failure mechanism.
Numerical simulations on loaded foundation piles performed with the Plaxis software Show however, that the failure mechanism of a foundation pile represents a far more complex threedimensional failure mechanism around the pile tip.
In addition, the existing analytical methods for foundation piles are based on the vertical stresses in the soil, as if the failure mechanism is the same as of a shallow foundation. Numerical simulations, performed in Plaxis show that, not the vertical, but the horizontal stresses, play an important role on the pile bearing capacity. Plaxis represents the stresses in the soil by using the procedure. So, different horizontal soil stresses are obtained for different values of the lateral earth pressure coefficient. The results show that the pile tip bearing capacity depends strongly on the horizontal stresses in the soil, but only for. The same results were observed by using a Material Point Method (MPM). Consequently, the analytical methods should estimate the pile bearing.
This paper scopes the specialties of a hazard identification study for large and extra-large unmanned undersea vehicles (UUVs). A generic node/function structure is derived from different large and extra-large UUV designs, partially own vehicle designs from research projects, and partially from commercial vehicles. For each node, a short overview of its components and the proper function or operations is defined. A set of guide words is used to prompt a hazard discussion for each node, which identifies unwanted functions, resulting in potential hazards and unmitigated consequences. Related to the SafeMASS-Report from DNV, this work concentrates on selected topics of the bridge-related function on voyage, control & monitoring, and abnormal situations. For unmanned vehicles without any person on board, these three topics become more important for underwater vehicles with very limited connectivity or temporary disruptions of communication whereby an operator in a remote-control center could only be provided with rough vehicle or mission states. Therefore, vehicle control, whether in hard- or software, must handle most tasks belonging to the considered functions automatically or autonomously. Hence, the most appropriate reactions of the system to unwanted system
behavior must be implemented. This HAZID study could, on the one hand, be used as background for such an implementation, and on the other hand, it is used to verify the implemented actions on the risks and hazards.
Explosion-induced ground vibrations have been measured at several places. Results about the wave propagation are shown in this contribution. The particle velocities of the soil have been measured at up to 1000 m distance from the explosion and are presented as time records (seismograms) and one-third octave band spectra (transfer functions). The results are compared with the results of hammer impacts. The seismograms clearly show different wave types, compressional waves of the air, the water and the soil, and the Rayleigh wave. The hammer impacts yield good results up to 100 m and incorporate higher frequencies at about 50 Hz, whereas the explosion results in a ground vibration with frequencies around 10 Hz and a longer range of influence. Explosion and hammer excitations are evaluated for the wave velocities of the soil by using the wavenumber and the spatial auto-correlation method. The attenuation of the ground vibration amplitudes A with distance r can well be presented by a power law A ~ r -q. This type of amplitude-distance law and the corresponding power q > 1 are substantiated in the contribution. The influence of the charge weight W is evaluated as an additional power law A ~ W -p for each measuring site. The power is found quite similarly around q 0.6 as all sites have a medium soft soil such as sand and clay. The obtained amplitude-charge-distance law can be used to predict the explosion-induced ground and building vibrations at other sites.
This article presents a solid cohesion model for the simulation of bonded granular assemblies in the frame of 3D discrete element approaches (DEM). A simple viscoplastic cohesion model for 2D geometries is extended to 3D conditions, while its yield criterion is generalized as a hyper-surface in the space of bond solicitations to include torsional moments. The model is then calibrated using experimental results of uniaxial traction at both the microscopic and macroscopic scales with an artificial granular cohesive soil. The paper finally presents some simulated results on the macromechanical sample traction application and briefly discusses the model's current limitations and promising prospects for subsequent works.
Owners or operators of offshore wind farms perform inspections to collect information on the condition of the wind turbine support structures and perform repairs if required. These activities are costly and should be optimized. Risk-based methods can be applied to identify inspection and repair strategies that ensure an optimal balance between the expected total service life cost of inspection and repair, and the achieved risk reduction. Such an optimization requires explicit modeling of repairs. In this paper, the impact of different repair models on the results of a risk-based optimization of inspection and repair strategies is quantified in a numerical example considering a jacket-type steel frame subject to high-cycle fatigue. The example showed that, in this specific application, there is no need for detailed modeling of the behavior of repaired welded connections.
In this contribution, we consider two applications in which probabilistic approaches can potentially complement or enhance the design and assessment of offshore wind turbine foundations. First, we illustrate in a numerical example that probabilistic modelling can be helpful in dealing with chang-es in turbine locations during the planning phase of an offshore wind farm. In this case, spatial probabilistic modelling of the ground conditions enables (a) an inference of the soil properties at the modified turbine location from field data collected at different locations across an offshore wind farm site and (b) an optimisation of further site investigations. Second, we discuss the uncer-tainties and risks associated with the installation of large diameter monopiles in soils with hetero-geneities such as strong layers and/or embedded boulders. Subsequently, we present a concept for modelling, understanding, and managing these risks based on a probabilistic model of the subgrade conditions, monopile, and subgrade-pile-interaction.
Identifying optimal inspection and repair strategies for offshore jacket structures is a challenging task. We pre-sent an approach, which is based on recent developments in the field of risk-based operation and maintenance planning at the structural system level. The approach utilizes heuristics to define inspection and repair strate-gies at the system level and to reduce the search space of possible strategies. For each defined strategy, the expected service life cost of inspection, repair and failure is evaluated based on simulated inspection and re-pair histories. Subset simulation is applied to compute the conditional repair and failure probabilities required for this analysis. It also forms the basis for simulating inspection and repair histories. The strategy that mini-mizes the expected service life cost is the optimal one in the set of pre-selected strategies. The underlying condition and performance model accounts for the stochastic dependence among the deterioration states of the different structural elements and the structural redundancy. The approach is demonstrated in a case study considering a jacket-type frame. In this study, we essentially vary the inspection interval, the minimum num-ber of inspected components and the target reliability, and identify the combination that minimizes the ex-pected total service life cost.