6 Materialchemie
Filtern
Dokumenttyp
- Zeitschriftenartikel (129)
- Beitrag zu einem Tagungsband (2)
- Buchkapitel (1)
Sprache
- Englisch (132)
Referierte Publikation
- ja (132) (entfernen)
Schlagworte
- Microplastics (11)
- Broadband dielectric spectroscopy (9)
- DNA (9)
- Dosimetry (7)
- Microplastic (7)
- Nanocomposites (7)
- Radiation damage (7)
- Geant4 (6)
- Geant4-DNA (6)
- Microdosimetry (6)
- TED-GC/MS (6)
- DNA damage (5)
- Ectoine (5)
- LEE (5)
- Simulation (5)
- X-ray scattering (5)
- Atomic force microscopy (4)
- AuNP (4)
- Beta decay (4)
- Brachytherapy (4)
- Cancer treatment (4)
- Discotic Liquid Crystals (4)
- Discotic liquid crystals (4)
- Energy deposit (4)
- Gold Nanoparticles (4)
- Low energy electrons (4)
- MCS (4)
- Monte-Carlo simulation (4)
- NP (4)
- Nanoparticles (4)
- Radiationtherapy (4)
- Radioactive decay (4)
- SSB (4)
- Specific heat spectroscopy (4)
- TOPAS (4)
- TOPAS-nbio (4)
- Advanced calorimetry (3)
- Base damage (3)
- Base loss (3)
- Boehmite (3)
- Direct laser writing (3)
- Ectoin (3)
- Epoxy (3)
- Flash DSC (3)
- G5P (3)
- Intermodulation AFM (3)
- Ionic Liquid Crystals (3)
- Multiphoton lithography (3)
- Nanocomposite (3)
- Neutron scattering (3)
- OH radical (3)
- OH radicals (3)
- Particle scattering (3)
- Polymers of intrinsic microporosity (3)
- Protein (3)
- ROS (3)
- Radical scavenger (3)
- Radiolysis (3)
- Reference material (3)
- SAXS (3)
- ssDNA (3)
- Adsorption (2)
- Aluminium oxide hydroxide (2)
- Analysis (2)
- Antibacterial (2)
- Beta particle (2)
- Bio-SAXS (2)
- Boson peak (2)
- Clustered nanoparticles (2)
- Composites (2)
- Cosolute (2)
- DMSO (2)
- DNA radiation damage (2)
- Dielectric spectroscopy (2)
- Direct damage (2)
- Dissociative electron attachment (DEA) (2)
- Dissociative electron transfer (DET) (2)
- Double-strand break (DSB) (2)
- Electrolyte membrane (2)
- Electrospinning (2)
- Epoxy nanocomposites (2)
- Fast scanning calorimetry (2)
- Friction (2)
- GVP (2)
- Gamma ray (2)
- Gas separation membranes (2)
- Glass transition temperature (2)
- Graphene oxide (2)
- Hydrated DNA (2)
- Hydrated electron (2)
- Hydration shell (2)
- Hydroxyectoine (2)
- Hydroxyl radical (2)
- Indirect damage (2)
- Interphase (2)
- Ionization (2)
- Ionizing radiation damage (2)
- Lead ions (2)
- Liquid crystals (2)
- Livermore model (2)
- Mechanical properties (2)
- Micropatterning (2)
- Monte-Carlo simulations (2)
- NAP-XPS (2)
- Nanoparticle (2)
- Near ambient pressure xray photo electron spectroscopy (2)
- Net-ionization reaction (2)
- Neutron Scattering (2)
- OH radical scavenger (2)
- Particle scattering simulations (2)
- Penelope model (2)
- Polydopamine (2)
- Polymer composites (2)
- Polymer of intrinsic microporosity (2)
- Polymers (2)
- Polymers of Intrinsic Microporosity (2)
- Polynorbornenes (2)
- Polyurethane (2)
- Polyvinyl alcohol (2)
- Prehydrated electron (2)
- Protein unfolding (2)
- Quasi-direct damage (2)
- Quasielastic neutron scattering (2)
- Radiation therapy (2)
- Radical (2)
- Raman spectroscopy (2)
- Reactive oxygen species (2)
- Rhodamine B (2)
- Rigid amorphous fraction (2)
- Rosin (2)
- SZ2080 negative photo-resist (2)
- Single-strand break (SSB) (2)
- Single-stranded DNA-binding proteins (2)
- Soil (2)
- Solution doping (2)
- Synthesis (2)
- TGA (2)
- Thermoplastics (2)
- Thin films (2)
- Thin polymer films (2)
- Tire wear (2)
- Ultra thin polymer films (2)
- XPS (2)
- Xray (2)
- Xray photo electron spectrocopy (2)
- 1H-NMR (1)
- 266nm (1)
- 2PP (1)
- AFM (1)
- AFM force distance curves (1)
- AFM force spectroscopy (1)
- AFM friction analysis (1)
- AFM plastic deformation (1)
- AFM stiffness of interface (1)
- AGE (1)
- APTES (1)
- Abasic site (1)
- Additive manufacturing (1)
- Advanced materials (1)
- Agarose gel electrophorese (1)
- Aging (1)
- Aktivkohle (1)
- Alpha (1)
- Amino Acids (1)
- Analytical Chemistry (1)
- Artificial weathering (1)
- Atomic and Molecular Physics and Optics (1)
- Au (1)
- Automation (1)
- BET (1)
- Bacteriophage f1 (1)
- Bbeverages (1)
- Beta elimination (1)
- BioSAXS (1)
- Biodosimetry (1)
- Biologisches Dosimeter (1)
- Biomarker (1)
- Bloch wall (1)
- Blockcopolymer (1)
- Boehmit nanoparticle (1)
- Boehmite nanoparticles (1)
- Bragg peak (1)
- Brilliant Blue R (1)
- Broadband Dielectric Spectrscopy (1)
- Broadband dielectric microscopy (1)
- Buffer (1)
- Bystander effect (1)
- CPD (1)
- Cancer (1)
- Cancer therapy (1)
- Carbon Nanomembranes (1)
- Carbon ions (1)
- Cationic photocuring (1)
- Cell size (1)
- Cells (1)
- Cellulose acetate (1)
- Cellulose nanofibrils (1)
- Cladding-doped fibers (1)
- Co (1)
- Cobalt (1)
- Columnar Liquid Crystal (1)
- Compatible solute (1)
- Compost (1)
- Conductivity (1)
- Confocal microscopy (1)
- Confocal raman imaging (1)
- Coordination polymer (1)
- Corrosion (1)
- Corrosion resistance (1)
- Counterions (1)
- Covalent Organic frameworks (1)
- Crosslink density control (1)
- Crosslinking (1)
- Crosslinking density (1)
- Cryo milling (1)
- Curie temperature (1)
- Cy3 (1)
- Cycloaliphatic epoxy oligosiloxane (1)
- DFT calculations (1)
- DFT calculations of Raman spectra (1)
- DNA Dosimeter (1)
- DNA base damage (1)
- DNA based data storage (1)
- DNA data storage (1)
- DNA degradation (1)
- DNA long term storage (1)
- DNA melting temperature (1)
- DNA protection (1)
- DNA reference material (1)
- DNA stability (1)
- DNA strand-break (1)
- DNA vortexing (1)
- DSB (1)
- DSC (1)
- Damping factor (1)
- Data analysis (1)
- Degradation (1)
- Degradation signatures (1)
- Density separation (1)
- Differential scanning calorimetry (1)
- Direct laser interference patterning (1)
- Domain wall (1)
- Dry DNA (1)
- Dye-doped fiber (1)
- Dynamic heterogeneity (1)
- ESCA (1)
- Earthworms (1)
- Ectoine DNA protection (1)
- Ectoine UV absorption (1)
- Ectoine hydration (1)
- Ectoine-DNA binding (1)
- Elastic membrane (1)
- Electrical conductivity (1)
- Electron microscopy (1)
- Electron tomography (1)
- Electrons (1)
- Electrospun nanocomposite fiber (1)
- Energy dependent XPS (1)
- Epoxy conversion degree (1)
- Estrogenic activity of plastic nanoparticles (1)
- Exchange interaction (1)
- Exchange length (1)
- Excited states (1)
- Exploratory analysis (1)
- FLASH effect (1)
- FTIR (1)
- Fabrication parameters (1)
- Fast Scanning Calorimetry (1)
- Fast scanning calormetry (1)
- Fe (1)
- Femtosecond laser (1)
- Fenton Reaction (1)
- Fermi resonance (1)
- Ferromagnetism (1)
- Filter crucible (1)
- Flexible crystals (1)
- Fluorescence (1)
- Fluorescent optical fiber (1)
- Fluorescent optical fibers (1)
- Fluoropolymers (1)
- Force-distance-curve (1)
- Freezing (1)
- Fuell cells (1)
- Functionalization (1)
- Gamma (1)
- Gas sensors (1)
- Gel electrophoresis (1)
- Gene five protein (1)
- Grafting (1)
- H2O2 (1)
- HPLC (1)
- Hairpin (1)
- Halloysite nanotubes (1)
- Hierarchical structures (1)
- Highly permeably polynorbornenes (1)
- Humidity (1)
- Hydroxyl radicals (1)
- IR (1)
- In-situ polymerization (1)
- Inelastic neutron scattering (1)
- Infrared nano AFM (1)
- Instrumentation (1)
- Interlaboratory comparability (1)
- Interlaboratory comparison (1)
- Intermodulation (1)
- Intermodulation-AFM (1)
- Interpenetrating polymer network (1)
- Ion beam therapy (1)
- Ionic liquid crystal (1)
- Ionic liquid crystalls (1)
- Ionisation (1)
- Iron (1)
- Irreversible adsorption (1)
- Knufia petricola (1)
- LC-UV (1)
- LET (1)
- LL equation (1)
- LLG (1)
- Landau Lifshitz Gilbert equation (1)
- Landau Lifshitz equation (1)
- Landau de-Gennes analysis (1)
- Laser direct writing (1)
- Laser-induced periodic surface structures (LIPSS) (1)
- Lignin (1)
- Liquid Crystals (1)
- MCC (1)
- MCNP (1)
- MOUSE (1)
- MRT (1)
- MWCNT (1)
- Magnet coupling (1)
- Magnetic Nanoparticles (1)
- Magnetic anisotropy (1)
- Magnetic interacion (1)
- Magnetic moment (1)
- Magnetization dynamics (1)
- Mass spectrometry (1)
- Material chemistry (1)
- McSAS3 (1)
- Mechanical flexibility (1)
- Mechanical property (1)
- Mechanical stress (1)
- Membranes (1)
- Metal ions (1)
- Metal oxides (1)
- Methodology (1)
- Methoxytrimethlsilane (1)
- Methyl group rotation (1)
- Microfabrication (1)
- Micromagnetism (1)
- Microplastic fibers (1)
- Mild steel (1)
- Modelling (1)
- Modulus (1)
- Moisture (1)
- Molecular beacon (1)
- Molecular mobility (1)
- Monitoring (1)
- Multi photon lithography (1)
- Mussel-inspired materials (1)
- NIR spectroscopy (1)
- Nanocomposite fibers (1)
- Nanoconfinement (1)
- Nanodosimetry (1)
- Nanomaterials (1)
- Nanomechanical charecteisation (1)
- Nanomechanical properties (1)
- Nanomechanics (1)
- Nanoplastics (1)
- Nanopores (1)
- Nanopropous materials (1)
- Nanosafety (1)
- Nanostructure quantification (1)
- Neel wall (1)
- Ni (1)
- Nickel (1)
- Non-destructive testing (1)
- Nucleobase (1)
- OH (1)
- OH Radical (1)
- OH scavenger (1)
- OOMMF (1)
- Object oriented micromagnetic framework (1)
- Oligonucleotides (1)
- Open data on zenodo (1)
- Optical birefringence (1)
- Organic crystal (1)
- Organic micro-pollutant (1)
- Osmolyte (1)
- Oxidation (1)
- PBS (1)
- PES (1)
- PET (1)
- PFAS (1)
- PIFE (1)
- PMMA (1)
- PUR (1)
- PVDF (1)
- Paramagnetism (1)
- Pharmacy (1)
- Phase transition (1)
- Photons (1)
- Photooxidation (1)
- Physical aging (1)
- Plasma Polymerization (1)
- Plasma Polymers (1)
- Plasma treatments (1)
- Plasmid DNA (1)
- Plastic bottles (1)
- Plastic deformation (1)
- Plastic optical fibers (1)
- Plastic pollution (1)
- Poly(amino phosphodiester) (1)
- Polycarbonate (1)
- Polyethylene colonization (1)
- Polyglycerol (1)
- Polymer analysis/characterization (1)
- Polymer based Nanocomposites (1)
- Polymer blends (1)
- Polymer of intrisic microporosity (1)
- Polymer optical fiber (1)
- Polymer-based nanocomposites (1)
- Polymers with intrinsic microporosity (1)
- Polymethyl methacrylate (1)
- Polynorbornes (1)
- Polyvinyl formaldehyde (1)
- Polyvinyl formaldehyde foam (1)
- Polzmethyl methacrylate (1)
- Position of carboxylate group (1)
- Powdered activated carbon (1)
- Preferential exclusion (1)
- Presolvated electron (1)
- Principle component analysis (1)
- Propolis (1)
- Protein-induced fluorescence enhancement (1)
- Proteins (1)
- Protein–DNA filament (1)
- Pyrolysis (1)
- Quality control (1)
- Quencher (1)
- RAMAN (1)
- RBE (1)
- RNA (1)
- Radiation (1)
- Radiation protection (1)
- Radical Scavenge (1)
- Radical Scavenger (1)
- Radiotherapy (1)
- Raman (1)
- Raman Spectroscopy (1)
- Real-time infrared spectroscopy (1)
- Recycling (1)
- Risk assessment (1)
- River (1)
- Rod-like liquid crystals (1)
- Round Robin (1)
- SBP (1)
- SYBR Gold (1)
- SYBR gold (1)
- Salt (1)
- Sampling (1)
- Sampling techniques (1)
- Sedimentation (1)
- Sedimentation box (SB) (1)
- Semiconductors (1)
- Settling velocity (1)
- Silane (1)
- Single-stranded DNA-binding protein (1)
- Sinking velocity (1)
- Slicers (1)
- Small-angle scattering (1)
- Small-angle xray scattering (1)
- Soft X-ray (1)
- Soil microbial community (1)
- Spectroscopy (1)
- Spin (1)
- Stainless steel (1)
- Steel (1)
- Stochastic Landau Lifshitz Gilbert equation (1)
- Stochastic Landau Lifshitz equation (1)
- Strand break (1)
- Structural precision (1)
- Structure-property relationship (1)
- Structure–property correlation (1)
- Structure–property relationship (1)
- Sulfur cathodes (1)
- Sunscreen (1)
- Superior sorbent (1)
- Superparamagnetism (1)
- Surface (1)
- Surface analysis (1)
- Surface functionalization (1)
- Surface properties (1)
- Surface species (1)
- Suspended organic matter (1)
- Suspended particulate matter (SPM) (1)
- TED-GC-MS (1)
- TEM (1)
- TGA-FTIR (1)
- TGA-MS (1)
- THP(B) (1)
- TPU (1)
- Temeprature scaling (1)
- Temperature effects (1)
- Temperature modulated differential scanning calorimetry (1)
- Tetraethyl orthosilicate (1)
- Thawing (1)
- Therapy (1)
- Thermal analysis (1)
- Thermal desorption mass spectrometry (1)
- Thermal extraction desorption-gas chromatography/mass spectrometry (TED-GC/MS), monitoring (1)
- Thermal extraction-desorption gas chromatography mass spectrometry (1)
- Thermoanalytik (1)
- Thermoset (1)
- Thermoset composition (1)
- Thermosets (1)
- Thin film systems (1)
- Tire Wear (1)
- Tire particles (1)
- Titanium (1)
- Topas (1)
- Topas-MC (1)
- Topas-nBio (1)
- Toxicity (1)
- Trace organic contaminant (1)
- Two-photon polymerization (1)
- UV absorption (1)
- UV irradiation (1)
- UV photons (1)
- UV protection (1)
- UV radiation (1)
- UV-A (1)
- UV-B (1)
- UV-C (1)
- UV-Vis (1)
- Urban (1)
- Van der Waals forces (1)
- Volatiles from thermosets (1)
- Water (1)
- Water samples (1)
- Water treatment (1)
- White light interferometry microscopy (1)
- X-ray microscopy (1)
- X-ray photoelectron spectroscopy (1)
- XCT (1)
- XPS spctroscopy (1)
- Young´s modulus (1)
- Zinc analysis (1)
- Zwitterion (1)
- abasic side (1)
- base loss (1)
- beta particle (1)
- clustered nanoparticles (1)
- dsDNA (1)
- gamma ray (1)
- lN2 (1)
- low energy electrons (1)
- oxidative stress (1)
- pH (1)
- pUC19 (1)
- particle scattering (1)
- radiolysis (1)
- temeprature dependent exchange length (1)
Organisationseinheit der BAM
- 6.6 Physik und chemische Analytik der Polymere (132) (entfernen)
Paper des Monats
- ja (6)
Direct Laser Writing (DLW) and X-ray computed tomography (XCT) both offer unique possibilities in their respective fields. DLW produces full three-dimensional (3D) polymer structures on the microscale with resolutions below 100 nm. The fabricated structures can be analysed by XCT or X-ray microscopy (XRM), which incorporates additional X-ray lenses, in three dimensions down to a minimal basic spatial resolution of about 500 nm or 50 nm, respectively. In this work, two different DLW structures are analysed via XCT. Internal defects are detected and analysed for the purpose of quality control. Defects and structures with sizes down to 1.5 µm are successfully analysed. A 3D reconstruction and internal, hidden features of the fabricated structures are shown and discussed. In a first-of-its-kind study, we demonstrate the detectability of a single-voxel line inside a fabricated structure that would not be detectable with SEM or light microscopy. Furthermore, the direct fabrication on a PET substrate is shown to overcome the high X-ray absorbance of commonly used glass substrates. Attenuation spectra of SZ2080 and glass substrates are compared to a fabrication route direct on a 170 µm PET foil. The practical aspects of XCT measurements for DLW structures on different substrates will be discussed.
DNA long-term stability and integrity is of importance for applications in DNA based bio-dosimetry, data-storage, pharmaceutical quality-control, donor insemination and DNA based functional nanomaterials. Standard protocols for these applications involve repeated freeze-thaw cycles of the DNA, which can cause detrimental damage to the nucleobases, as well as the sugar-phosphate backbone and therefore the whole molecule. Throughout the literature three hypotheses can be found about the underlying mechanisms occurring during freeze-thaw cycles. It is hypothesized that DNA single-strand breaks during freezing can be induced by mechanical stress leading to shearing of the DNA molecule, by acidic pH causing damage through depurination and beta elimination or by the presence of metal ions catalyzing oxidative damage via reactive oxygen species (ROS). Here we test these hypotheses under well defined conditions with plasmid DNA pUC19 in high-purity buffer (1xPBS) at physiological salt and pH 7.4 conditions, under pH 6 and in the presence of metal ions in combination with the radical scavengers DMSO and Ectoine. The results show for the 2686 bp long plasmid DNA, that neither mechanical stress, nor pH 6 lead to degradation during repeated freeze-thaw cycles. In contrast, the presence of metal ions (Fe2+) leads to degradation of DNA via the production of radical species.
Polymers of intrinsic microporosity (PIMs) are promising candidates for the active layer in gas separation membranes due to their high permeability and reasonable permselectivity. These appealing properties originate from a microporous structure as a result of inefficient segment packing in the condensed state due to a combination of a ladder-like rigid backbone and sites of contortion. However, this class of polymers suffers from a significant decrease in the permeability with time due to physical aging, whereby typically, the permselectivity increases. The initial microporous structures approach a denser state via local rearrangements, leading to the reduction of the permeability. Hence, a detailed characterization of the molecular mobility in such materials can provide valuable information on physical aging. In this work, the dielectric behavior of PIM-1 films and their behavior upon heating (aging) were revisited by isothermal frequency scans during different heating/cooling cycles over a broad temperature range between 133 and 523 K (−140 to 250 °C). In addition, the obtained results were compared with data of samples that were annealed at ambient temperatures over different time scales. Multiple dielectric processes were observed: several relaxation processes due to local fluctuations and a Maxwell−Wagner−Sillars polarization effect related to the microporosity. The temperature dependence of the rates of all processes follows the Arrhenius law where the estimated activation energy depends on the nature of the process. The influence of the thermal history (aging) on the processes is discussed in detail.
We report a new sequence selective terpolymerisation in which three monomers (butylene oxide (BO) A, PhNCS B and phtalic thioanhydride (PTA) C) are selectively enchained into an (ABA′C)n sequence. PTA/PhNCS/BO ring-opening terpolymerisation ROTERP can be coupled with CS2 ROTERP to generate tetrapolymers and with εDL ROP in switchable catalysis for blockpolymer synthesis.
We study the molecular mobility and electrical conductivity of a homologous series of linear shaped columnar ionic liquid crystals ILCn, (n = 8, 10, 12, 14, 16) using broadband dielectric spectroscopy (BDS), specific heat spectroscopy (SHS), and X-ray scattering. We aim to understand how the alkyl chain length influences the dynamics and electric conductivity in this system. Two dielectrically active relaxation modes are observed, the γ and the αcore process, that correspond to the localized fluctuations of the alkyl chains and cooperative motions of the aromatic core in the columns, respectively. Both the γ relaxation and the αcore process slow down with increasing alkyl chain length. SHS reveals one relaxation process, the αalkyl process that has a similar temperature dependence as that of the αcore process for ILC12, 14, and 16 but shifts to higher temperature for ILC8 and 10. For ILC12, 14, and 16, the absolute values of DC conductivity increase by 4 orders of magnitude at the transition from the plastic crystalline to hexagonal columnar phase. For ILC8 and 10, the DC conductivity behavior is similar to ionic liquids, where the conductivity is coupled with structural relaxation. Small-angle X-ray investigations reveal that both the intercolumnar distance and the disorder coherence length increase with alkyl chain length; conversely, the DC conductivity decreases monotonically.
In this study, carried out within the Joint Danube Survey 4, a comprehensive microplastic screening in the water column within a large European river basin from its source to estuary, including major tributaries, was realized. The objective was to develop principles of a systematic and practicable microplastic monitoring strategy using sedimentation boxes for collection of suspended particulate matter followed by its subsequent analysis using thermal extraction desorption-gas chromatography/mass spectrometry. In total, 18 sampling sites in the Danube River Basin were investigated. The obtained suspended particulate matter samples were subdivided into the fractions of >100 μm and <100 μm and subsequently analyzed for microplastic mass contents. The results showed that microplastics were detected in all samples, with polyethylene being the predominant polymer with maximum contents of 22.24 μg/mg, 3.23 μg/mg for polystyrene, 1.03 μg/mg for styrene-butadiene-rubber, and 0.45 μg/mg for polypropylene. Further, polymers such as different sorts of polyester, polyacrylates, polylactide, and natural rubber were not detected or below the detection limit. Additional investigations on possible interference of polyethylene signals by algae-derived fatty acids were assessed. In the context of targeted monitoring, repeated measurements provide more certainty in the interpretation of the results for the individual sites. Nevertheless, it can be stated that the chosen approach using an integrative sampling and determination of total plastic content proved to be successful.
To enhance the biological effects of radiation damage in cancerous cells, we present an alternative approach to the use of gold nanoparticles (AuNP), focusing on the synthesis and characterization of highly monodisperse, spherical radioactive gold nanoparticles 198AuNP. The size of the AuNP size was optimized with the help of Geant4/TOPAS particle scattering simulations, and energy deposition per nm3 per decay for varying radii (2–10 nm) was evaluated. This work is the foundation for ongoing experimental work to evaluate cell death induced by 198AuNP which aims for the use of radioactive gold nanoparticles in cancer treatment.
An immobilization of graphene oxide (GO) into a matrix of polyvinyl formaldehyde (PVF) foam as an eco-friendly, low cost, superior, and easily recovered sorbent of Pb ions from an aqueous solution is described. The relationships between the structure and electrochemical properties of PVF/GO composite with implanted Pb ions are discussed for the first time. The number of alcohol groups decreased by 41% and 63% for PVF/GO and the PVF/GO/Pb composite, respectively, compared to pure PVF. This means that chemical bonds are formed between the Pb ions and the PVF/GO composite based on the OH groups. This bond formation causes an increase in the Tg values attributed to the formation of a strong surface complexation between adjacent layers of PVF/GO composite. The conductivity increases by about 2.8 orders of magnitude compared to the values of the PVF/GO/Pb composite compared to the PVF. This means the presence of Pb ions is the main factor for enhancing the conductivity where the conduction mechanism is changed from ionic for PVF to electronic conduction for PVF/GO and PVF/GO/Pb.
This paper presents the results concerning monotropic nematic liquid crystals 4-pentylphenyl 40-alkyl benzoate (5PnB) (n = 3 or 5 carbon atoms in the alkyl chain). Their mesophase properties were supported by images of the polarized optical microscopy. Molecular dynamics in the bulk samples or in the composites prepared with aerosil A380 was investigated by broadband dielectric spectroscopy in a large temperature range, appropriately chosen. Thermo gravimetric and infrared investigations were additionally performed. The data were compared with those of structurally related nematics like cyanophenyl pentyl benzoates, which have a cyan group instead of the pentyl chain. The dielectric spectra of the bulk 3P5B and 5P5B demonstrate a dielectric behavior with several relaxation processes as expected for nematic liquid crystals. The temperature dependence of the relaxation rates (and of the dielectric strength) seems to have two distinguished regimes. Thus, in the isotropic state, at higher temperatures the data obey the Vogel–Fulcher–Tammann law, whereas an Arrhenius law is fitted at lower temperature, in a close similarity to the behavior of a constrained dynamic glass transition. Samples with a high density of silica (larger than 7 g aerosil/1 g of 5PnB) were prepared to observe a thin layer adsorbed on the particle surface; it was estimated that almost each guest 5PnB molecule interacts with the aerosil surface. For the composites only one main relaxation process is observed at frequencies much lower than those for the corresponding bulk, which was assigned to the dynamics of the molecules in the surface layer. Infrared spectroscopy shows that these molecules interact with the surface by the ester carbonyl group leading to the monolayer self-assembly at liquid–solid interface. We note once more the importance of the functional unit(s) for the interaction with the hydroxyl groups on the aerosil surface.
Hexakis(n-alkyloxy)triphenylene) (HATn) consisting of an aromatic triphenylene core and alkyl side chains are model discotic liquid crystal (DLC) systems forming a columnar mesophase. In the mesophase, the molecules of HATn self-assemble in columns, which has one-dimensional high charge carrier mobility along the columns. Here, a homologous series of HATn with different length of the alkyl chain (n = 5,6,8,10,12) is investigated using differential scanning calorimetry (DSC), broadband dielectric spectroscopy (BDS) and advanced calorimetric techniques including fast scanning calorimetry (FSC) and specific heat spectroscopy (SHS). The investigation of the phase behavior was done utilizing DSC experiments and the influence of the alkyl chain length on the phase behavior was revealed. By the dielectric investigations probing the molecular mobility, a c-relaxation due to localized fluctuations as well as two glassy dynamics, the acore- and aalkyl-relaxation, were observed in the temperature range of the plastic crystalline phase. Moreover, the observed glassy dynamics were further studied employing advanced calorimetry. All observed relaxation processes are attributed to the possible specific molecular fluctuations and discussed in detail. From the results a transition at around n = 8 from a rigid constrained (n = 5,6) to a softer system (n = 10,12) was revealed with increasing alkyl chain length. A counterbalance of two competing effects of a polyethylene-like behavior of the alkyl chains in the intercolumnar domains and self-organized confinement is discussed in the context of a hindered glass transition.
The molecular dynamics of two addition type polynorbornenes, exo-PNBSiand PTCNSi1, bearing microporosity has been investigated by broadbanddielectric spectroscopy, fast scanning calorimetry, and neutron scattering. Bothpolymers have the same side groups but different backbones. Due to theirfavorable transport properties, these polymers have potential applications inseparation membranes for gases. It is established in literature that molecularfluctuations are important for the diffusion of small molecules through poly-mers. For exo-PNBSi, two dielectric processes are observed, which are assignedto Maxwell/Wagner/Sillars (MWS) process due to blocking of charge carriersat internal voids or pore walls. For PTCNSi1, one MWS-polarization process isfound. This points to a bimodal pore-size distribution for exo-PNBSi. A glasstransition for exo-PNBSi and for PTCNSi1 could be evidenced for the first timeusing fast scanning calorimetry. For Tgand the corresponding apparent activa-tion energy, higher values were found for PTCNSi1 compared to exo-PNBSi.For both polymers, the neutron scattering data reveal one relaxation process.This process is mainly assigned to methyl group rotation probably overlayedby carbon–carbon torsional fluctuations.
Spherical lignin nanoparticles (LNPs) fabricated via nanoprecipitation of dissolved lignin are among the most attractive biomass-derived nanomaterials. Despite various studies exploring the methods to improve the uniformity of LNPs or seeking more application opportunities for LNPs, little attention has been given to the fundamental aspects of the solvent effects on the intrinsic properties of LNPs. In this study, we employed a variety of experimental techniques and molecular dynamics (MD) simulations to investigate the solvent effects on the intrinsic properties of LNPs. The LNPs were prepared from softwood Kraft lignin (SKL) using the binary solvents of aqueous acetone or aqueous tetrahydrofuran (THF) via nanoprecipitation. The internal morphology, porosity, and mechanical properties of the LNPs were analyzed with electron tomography (ET), small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), and intermodulation AFM (ImAFM). We found that aqueous acetone resulted in smaller LNPs with higher uniformity compared to aqueous THF, mainly ascribing to stronger solvent−lignin interactions as suggested by MD simulation results and confirmed with aqueous 1,4-dioxane (DXN) and aqueous dimethyl sulfoxide (DMSO).
More importantly, we report that both LNPs were compact particles with relatively homogeneous density distribution and very low porosity in the internal structure. The stiffness of the particles was independent of the size, and the Young’s modulus was in the range of 0.3−4 GPa. Overall, the fundamental understandings of LNPs gained in this study are essential for the design of LNPs with optimal performance in applications.
Microplastics are small plastic fragments that are widely distributed in marine and terrestrial environments. While the soil ecosystem represents a large reservoir for plastic, research so far has focused mainly on the impact on aquatic ecosystems and there is a lack of information on the potentially adverse effects of microplastics on soil biota. Earthworms are key organisms of the soil ecosystem and are due to their crucial role in soil quality and fertility a suitable and popular model organism in soil ecotoxicology.
Therefore, the aim of this study was to gain insight into the effects of environmentally relevant concentrations of microplastics on the earthworm Eisenia andrei on multiple levels of biological organization after different exposure periods. Earthworms were exposed to two types of microplastics: (1) polystyrene-HBCD and (2) car tire abrasion in natural soil for 2, 7, 14 and 28 d. Acute and chronic toxicity and all subcellular investigations were conducted for all exposure times, avoidance behavior assessed after 48 h and reproduction after 28 d. Subcellular endpoints included enzymatic biomarker responses, namely, carboxylesterase, glutathione peroxidase, acetylcholinesterase, glutathione reductase, glutathione S-transferase and catalase activities, as well as fluorescence-based measurements of oxidative stress-related markers and multixenobiotic resistance activity. Multiple biomarkers showed significant changes in activity, but a recovery of most enzymatic activities could be observed after 28 d. Overall, only minor effects could be observed on a subcellular level, showing that in this exposure scenario with environmentally relevant concentrations based on German pollution levels the threat to soil biota is minimal. However, in areas with higher concentrations of microplastics in the environment, these results can be interpreted as an early warning signal for more adverse effects. In conclusion, these findings provide new insights regarding the ecotoxicological effects of environmentally relevant concentrations of microplastics on soil organisms.
Acrylic acid-styrene copolymer films were deposited plasma-chemically more gently using the pulsed plasma mode instead of the continuous mode, with linear and some slightly branched chains and marginal crosslinking.
Then, the styrene unit of copolymers was wet-chemically sulfonated by chlorosulfuric acid. On exposure to air, the formed 4-chlorosulfonic acid groups hydrolyze to sulfonic acid groups (-SO3H).
FTIR, XPS and broadband dielectric spectroscopy were employed to characterize the composition, the structure, the functional groups, and the electrochemical performance for the copolymers. A high concentration of sulfonic acid-containing groups was obtained in the sulfonated PS sample. The values of the DC conductivity DC for the sulfonated sample of the AA/S copolymer are ca. five orders of magnitude higher than that of the not-sulfonated copolymer materials.
Mussel-inspired polydopamine (PDA) initiated a multifunctional modification route that leads to the generation of novel advanced materials and their applications. However, existing PDA deposition techniques still exhibit poor spatial control, have a very limited capability of micropatterning and do not allow to locally tune PDA topography. Herein, we demonstrate PDA deposition based on Multiphoton Lithography (MPL) that enables full spatial and temporal control with nearly total freedom of patterning design. Using MPL, we achieve 2D microstructures of complex design with pattern precision of 0.8 μm without the need of a photomask or stamp. Moreover, this approach permits adjusting the morphology and thickness of the fabricated microstructure within one deposition step, resulting in a unique tunability of materials properties. The chemical composition of PDA is confirmed and its ability for protein enzyme immobilization is demonstrated. This work presents a new methodology for high precision and complete control of PDA deposition, enabling PDA incorporation in applications where fine and precise local surface functionalization is required. Possible applications include multicomponent functional elements and devices in microfluidics or lab-on-a-chip systems.
The need of clean water and the water-poor are increasing daily in the world. In addition, we are facing a dramatic increase in the industrial pollutions of rivers and groundwater, which led us to find a new way to treat industrial pollutants. The plasma discharge technique is one of the important, safe, and applicable for industrial wastewater decontamination. Decolorization of Brilliant Blue R (BBR) dye as a hazard material was noticed when the contaminated solution was exposed to the plasma discharge technique. The combination between the nonthermal plasma and catalysts was evaluated in this work to optimize the degradation efficiency. The PVDF/(MWCNTs/TiO2) as three system composites was employed to enhance the nonthermal plasma performance. The surface area, phase purity, shape, and photonic efficiency were characterized employing XRD, FTIR, SEM, DSC, and UV–Vis. techniques. The obtained results of degradation using NTP technique in presence of the PVDF/MWCNTs catalyst have been enhanced the BBR dye degradation by 19% than only plasma treatment for 20 min.
The durability processes of prepared PVDF/(MWCNTs/TiO2) was investigated and evaluated until 8 solar photocatalytic process repeating times.
Tire wear (TW) constitutes a significant source of microplastic in terrestrial ecosystems. It is known that particles emitted by roads can have an effect up to 100 m into adjacent areas. Here, we apply for the first-time thermal extraction desorption gas chromatography-mass spectrometry (TED-GC/MS) to determine TW in soil samples by detection of thermal decomposition products of styrene-butadiene rubber (SBR), without additional enrichment. Additionally, zinc contents were determined as an elemental marker for TW. Mixed soil samples were taken along three transects along a German motorway in 0.3, 2.0, and 5.0 m distance from the road. Sampling depths were 0–2, 2–5, 5–10, and 10–20 cm. Four fine fractions, 1 000–500, 500–100, 100–50, and <50 μm, were analyzed.
TW contents based on SBR ranged from 155 to 15 898 mg kg−1. TW contents based on zinc were between 413 and 44 812 mg kg−1. Comparison of individual values of SBR and zinc reveals SBR as a more specific marker. Results confirm that most TW ends up in the topsoil within a 2 m distance.
The sampling strategy resulted in representative data for a larger area. Standard deviations of quadruple TED-GC/MS determination of SBR were <10% for all grain size fractions. TED-GC/MS is a suitable analytical tool for determining TW in soil samples without the use of toxic chemicals, enrichment, or special sample preparation.
The concept of a ‘plastisphere microbial community’ arose from research on aquatic plastic debris, while the effect of plastics on microbial communities in soils remains poorly understood. Therefore, we examined the inhabiting microbial communities of two plastic debris ecosystems with regard to their diversity and composition relative to plastic-free soils from the same area using 16S rRNA amplicon sequencing. Furthermore, we studied the plastic-colonizing potential of bacteria originating from both study sites as a measure of surface adhesion to UV-weathered polyethylene (PE) using high-magnification field emission scanning electron microscopy (FESEM). The high plastic content of the soils was associated with a reduced alpha diversity and a significantly different structure of the microbial communities. The presence of plastic debris in soils did not specifically enrich bacteria known to degrade plastic, as suggested by earlier studies, but rather shifted the microbial community towards highly abundant autotrophic bacteria potentially tolerant to hydrophobic environments and known to be important for biocrust formation. The bacterial inoculates from both sites formed dense biofilms on the surface and in micrometer-scale surface cracks of the UV-weathered PE chips after 100 days of in vitro incubation with visible threadlike EPS structures and cross-connections enabling surface adhesion. High-resolution FESEM imaging further indicates that the microbial colonization catalyzed some of the surface degradation of PE. In essence, this study suggests the concept of a ‘terrestrial plastisphere’ as a diverse consortium of microorganisms including autotrophs and other pioneering species paving the way for those members of the consortium that may eventually break down the plastic compounds.
Long-time behavior of surface properties of microstructures fabricated by multiphoton lithography
(2021)
The multiphoton lithography (MPL) technique represents the future of 3D microprinting, enabling the production of complex microscale objects with high precision. Although the MPL fabrication parameters are widely evaluated and discussed, not much attention has been given to the microscopic properties of 3D objects with respect to their surface properties and time-dependent stability. These properties are of crucial importance when it comes to the safe and durable use of these structures in biomedical applications. In this work, we investigate the surface properties of the MPL-produced SZ2080 polymeric microstructures with regard to the physical aging processes during the post-production stage. The influence of aging on the polymeric microstructures was investigated by means of Atomic Force Microscopy (AFM) and X-ray Photoelectron Spectroscopy (XPS). As a result, a time-dependent change in Young’s Modulus, plastic deformation, and adhesion and their correlation to the development in chemical composition of the surface of MPL-microstructures are evaluated. The results presented here are valuable for the application of MPL-fabricated 3D objects in general, but especially in medical technology as they give detailed information of the physical and chemical time-dependent dynamic behavior of MPL-printed surfaces and thus their suitability and performance in biological systems.
Though the reinforcing properties of inorganic particles in thermosetting nanocomposites, has been exploited, the integration of nanoparticles continues to be challenging in terms of their homogeneous distribution and their manipulation which can contribute to occupational hazards. Due to a second encapsulations of nanoparticles, electrospun nanocomposite fibers containing nanoparticles might be an alternative for overcoming these issues, as the fiber nonwovens contains the nanoparticles allowing for safer manipulation. Here, the morphology, and the thermal properties of electrospun polycarbonate fibers containing taurine modified boehmite nanoparticles (BNP) are investigated by means of small and wide-angle X-ray scattering as well as fast scanning and temperature modulated fast scanning calorimetry for the first time. The latter techniques allow the investigation of the thermal properties of single fibers at heating rates up to 10^4 K s^-1 keeping its structure intact. A quantitative analysis of the scattering data reveals a porous structure of the fibers. The porous structure is quantified regarding the pore volume and the pore size. A constant amount of aggregation is found even for the highly BNP loaded fibers. Thermal analysis on the fibers reveals a rigid amorphous fraction (RAF) where it is known that RAF determinates the properties of a nanocomposite to a large extent. For the fibers RAF amounts up to 40 wt%, which is essential higher compared to equally formulated PC/BNP composite cast films. The RAF in the case of the fibers, is not only due to the presence of particles in the polymer but also due to orientation effects induced by the electrospinning process.