6 Materialchemie
Filtern
Dokumenttyp
Sprache
- Englisch (214) (entfernen)
Schlagworte
- Laser-induced periodic surface structures (LIPSS) (70)
- Surface functionalization (31)
- Corrosion (26)
- Femtosecond laser (26)
- Laser processing (18)
- Applications (17)
- Femtosecond laser ablation (16)
- Radiation protection (15)
- Laser-induced periodic surface structures, LIPSS (12)
- Laser-induced X-ray emission (11)
- Laser ablation (10)
- Nanostructures (10)
- MIC (9)
- Microstructures (9)
- CCMat (8)
- Chemically Complex Materials (8)
- Friction (7)
- Oxidation (7)
- Tribology (7)
- Ultrashort laser material interaction (7)
- Ultrashort laser pulses (7)
- Wear (7)
- Biofilm (6)
- Femtosecond laser processing (6)
- Microbiologically influenced corrosion (6)
- Atomic Force Microscopy (AFM) (5)
- Methanogens (5)
- Silicon (5)
- XANES (5)
- Archaea (4)
- Bacterial adhesion (4)
- Biofilms (4)
- Capillary waves (4)
- Electrocatalysis (4)
- Electromagnetic scattering (4)
- Material Acceleration Platforms (MAPs) (4)
- Single cell analysis (4)
- Spectroscopic imaging ellipsometry (4)
- Stainless steel (4)
- X-ray emission (4)
- Atomic Forc Microscopy (3)
- Bacterial attachment (3)
- Biocorrosion (3)
- Biofilm formation (3)
- Chalcopyrite (3)
- Corrosion monitoring (3)
- Direct laser interference patterning (DLIP) (3)
- Electrochemistry (3)
- Environmental Simulation (3)
- Finite-difference time-domain calculations (3)
- Free electron laser (3)
- Hard X-ray photoelectron spectroscopy (HAXPES) (3)
- High Entropy Alloys (3)
- High entropy alloy (3)
- Industrial applications (3)
- LIPSS (3)
- Laser-induced forward transfer (3)
- Light concentration (3)
- MAPz@BAM (3)
- Medium Entropy Alloys (3)
- Micro solar cell (3)
- Niobium (3)
- Potentiodynamic Polarization (3)
- Sc-ICP-ToF-MS (3)
- Scanning Kelvin Probe Force Microscopy (3)
- Secondary hazard (3)
- Self-driving-labs (SDLs) (3)
- Surface modification (3)
- Time-resolved scattering (3)
- Transmission electron microscopy (3)
- Ultrafast laser processing (3)
- Ultrashort laser processing (3)
- Ultrashort pulse laser processing (3)
- Ultrashort pulsed laser (3)
- AFM (2)
- Amorphization (2)
- Anodization (2)
- Aqueous Corrosion (2)
- Bacterial adhesion tests (2)
- Biofilm growth (2)
- Carbon fibers (2)
- Chemical analysis (2)
- Corrosion inhibition (2)
- Cribellate spiders (2)
- Cu(In,Ga)Se2 (2)
- Direct laser-interference patterning (DLIP) (2)
- Electrochemical Impedance Spectroscopy (2)
- Femtosecond laser patterning (2)
- High-entropy alloy (2)
- Hydrogen (2)
- ICP-MS (2)
- Iron (2)
- Laser-induced oxide layer (2)
- Laser-induced periodic surface structures (2)
- Laser-induced x-ray emission (2)
- Localised corrosion (2)
- Magnesium alloy (2)
- Material processing (2)
- Mechanochemistry (2)
- Metal-organic-frameworks (2)
- Methanogen (2)
- Modelling (2)
- Passivation (2)
- Polycarbonate (2)
- Polymer bilayer coatings (2)
- Pump-probe experiments (2)
- SC-ICP-ToF-MS (2)
- Scanning Kelvin Probe Force Microscopy (SKPFM) (2)
- Self-organization (2)
- Steel (2)
- Superconductivity (2)
- Surface oxidation (2)
- Ti6Al4V alloy (2)
- Time-of-flight secondary ion mass spectrometry (ToF-SIMS) (2)
- Titanium (2)
- Titanium alloy (2)
- Ultra-short pulse laser processing (2)
- X-ray photoelectron spectroscopy (2)
- ZnO nanopillars (2)
- ASTM (1)
- AZ31 (1)
- Ablation (1)
- Acid corrosion (1)
- Additives (1)
- Adhesion by mechanical interlocking (1)
- Advanced ultrashort-laser technology (1)
- Alkoxysilanes (1)
- Alloy (1)
- Aluminium (1)
- Aluminium alloy (1)
- Aluminum alloys (1)
- Analysis (1)
- Antiadhesive surfaces (1)
- Antibacterial surfaces (1)
- Antifouling surface coatings (1)
- Antifriction coefficient (1)
- Antimicrobial (1)
- Application properties (1)
- Artificial Intelligence (AI) (1)
- Atomic force microscopy (1)
- Au/Ag nanoparticles, (1)
- Automation (1)
- Bacteria (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial lipopolysaccharides (1)
- Bessel-beam laser dicing (1)
- Biocide (1)
- Biofilmbildung (1)
- Bioinspiration (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomimetics (1)
- Biomimicry (1)
- Bionic materials (1)
- Bone screws (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Buried interfaces (1)
- CIGSe (1)
- Calamistrum (1)
- Carbon dioxide reduction (1)
- Carbon steel corrosion (1)
- Cell appendages (1)
- Cell-repellent surfaces (1)
- Ceramic matrix composites (1)
- Chemical analyses (1)
- Coatings (1)
- Coherent exchange (1)
- Combined corrosive and mechanical load (1)
- Conditioning films (1)
- Conditioning layer (1)
- Conservation (1)
- Corrosion protection (1)
- Coupled corrosive and mechanial load (1)
- Creep (1)
- Crystallization (1)
- Cultural heritage (1)
- Cyclic Voltammetry (1)
- D7755-11 (1)
- Delamination (1)
- Dentistry (1)
- Diffusion (1)
- Diffusion multiples (1)
- Direct laser interference patterning (1)
- Doped ZnO nanostructures (1)
- Dynamic light scattering (1)
- E. coli (1)
- EIS (1)
- Editorial (1)
- Electrochemical Empedance Spectroscopy (EIS) (1)
- Electrochemical treatment (1)
- Electromagnetic radiation (1)
- Electromagnetic theories (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron microscopy (1)
- Electrophoresis (1)
- Electrospinning (1)
- Elektrolyse (1)
- Epoxide (1)
- European funding strategies (1)
- Eutectic (1)
- F pili (1)
- Femtosecond (1)
- Femtosecond Laser (1)
- Femtosecond laser-processing (1)
- Finite-difference time-domain calculations (FDTD) (1)
- Flow system (1)
- Flow-System (1)
- Fluid-flow (1)
- Force distance curve (1)
- Fourier Transform Infra Red Spectroscopy (1)
- Free electron laser (FEL) (1)
- Fs-Laser (1)
- Fs-laser patterning (1)
- Fuel sorption (1)
- Functional properties (1)
- Geothermal (1)
- Ggraphene polymer nanocomposite (1)
- Glasses (1)
- Glow-discharge optical emission spectroscopy (1)
- Grain orientation (1)
- Graphene polymer nanocomposite (1)
- Grating (1)
- Heat diffusion (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical micro-nanostructures (1)
- Hierarchical structures (1)
- High density polyethylene (1)
- High-repetition rate ultrafast laser processing (1)
- Homogenization (1)
- Human fibroblast growth factors (1)
- Human umbilical cell adhesion (1)
- Hydrodynamics (1)
- Implant material (1)
- In situ (1)
- In situ AFM (1)
- In situ Atomic Force Microscopy (AFM) (1)
- In situ X-ray diffraction (1)
- In situ atomic force microscopy (1)
- Industrial application (1)
- Interfacial stability (1)
- Intrinsically conducting polymers (1)
- Ion beam implantation (1)
- Ion implantation (1)
- Ir DNA staining approach (1)
- Iron reducing bacteria (1)
- LIFT (1)
- Large area structuring (1)
- Laser (1)
- Laser Machining (1)
- Laser cleaning (1)
- Laser damage (1)
- Laser micromachining (1)
- Laser nanostructuring (1)
- Laser patterning (1)
- Laser technology (1)
- Laser-induced amorphization (1)
- Laser-induced forward transfer (LIFT) (1)
- Laser-induced micro- and nanostructures (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-modified surface (1)
- Lattice misfit (1)
- Linear polyglycerol (1)
- Literature survey (1)
- Local corrosion (1)
- Lubricant additives (1)
- MDG ICP-ToF-MS (1)
- Machining (1)
- Macroion/growth factor assemblies (1)
- Magnesium alloys (1)
- Matter reorganization (1)
- Matter reorganization theories (1)
- Medical implants (1)
- Medium entropy alloy (1)
- Melting (1)
- Metal (1)
- Metal reducing bacteria (1)
- Metals (1)
- Methane (1)
- Method development (1)
- Micro solar cells (1)
- Micro-concentrator solar cell (1)
- Microbial (1)
- Microbial adhesions (1)
- Microbial induced corrosion (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological Corrosion (1)
- Microbiological influenced corrosion MIC (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microdroplet generator (1)
- Microencapsulation (1)
- Microorganism (1)
- Microscopy (1)
- Mixed-ligand MOFs (1)
- Modeling (1)
- Monitoring (1)
- Morphology control (1)
- Multi-principal element alloys (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multielectrode (1)
- Multilayercoatings (1)
- Multiport (1)
- Mussel-inspired adhesives (1)
- Nano characterization (1)
- Nanofibers (1)
- Nanorods (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanostrcutures (1)
- Nanostructuring (1)
- Native oxide layer (1)
- Near-field spectroscopy (1)
- Neurotrophins (1)
- Nobel-metal free electrocatalysis (1)
- Nonlinear lithography (1)
- Numerical simulations (1)
- Ophthalmology (1)
- Optical near field (1)
- Optical scattering (1)
- Passive films (1)
- Phase mask (1)
- Phase transitions (1)
- Phase-contrast microscopy (1)
- Photovoltaics (1)
- Plasmon resonance (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Poly(acrylic acid) (1)
- Polyelectrolytes (1)
- Polyethylene (1)
- Polyethylene glycol (1)
- Polyethylene terephthalate (1)
- Polymer foils (1)
- Polysaccharides (1)
- Polystyrene microparticles (1)
- Poster presentation (1)
- Protection housing (1)
- Pseudomonas aeruginosa (1)
- Pulse Laser (1)
- Pulsed laser ablation (1)
- Pump-probe (1)
- Raman Spectroscopy (1)
- Re-crystallization (1)
- Reactive oxygen species (1)
- Resins (1)
- SKPFM (1)
- SPR (1)
- Saline brine (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning electrochemical microscope (SECM) (1)
- Scanning kelvin probe force microscopy (1)
- Second-generation high temperature superconductor technology (1)
- Self-assembled monolayers (1)
- Self-driving-labs (1)
- Self-lubricating coating (1)
- Semiconductor (1)
- Silk (1)
- Single cell (1)
- Sliding (1)
- Spectroelectrochemical Techniques (1)
- Spectroscopy (1)
- Spontaneous emulsification (1)
- Stainless Steel (1)
- Structural Materials (1)
- Structural color (1)
- Sulphuric acid (1)
- Surface (1)
- Surface Enhanced Raman Spectroscopy (1)
- Surface analysis (1)
- Surface chemistry (1)
- Surface engineering (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface structures (1)
- Surface superconductivity (1)
- Surface texture (1)
- Swell-capture (1)
- Temporal beam shaping for precision machining (1)
- Theoretical modelling (1)
- Thin epoxy-based films (1)
- Thin films (1)
- Thin polymer films (1)
- Ti-6Al-4V alloy (1)
- Ti6Al4V alloys (1)
- Time of Flight - Secondary ion mass spectrometry (1)
- Time-offlight secondary ion mass spectrometry (ToF-SIMS) (1)
- Time-resolved analysis (1)
- Time-resolved coherent scattering (1)
- Titanium alloys (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Transpassive dissolution (1)
- UV-irradiation (1)
- Ultrafast scattering (1)
- Ultrashort (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser (1)
- Vascular endothelial growth factor (1)
- Volume processing, waveguide writing (1)
- Welding (1)
- Wetting (1)
- White light interferometric microscopy (1)
- X-ray (1)
- X-ray diffraction (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray hazards during ultrafast laser processing (1)
- X-ray spectroscopic techniques (1)
- X-ray spectrum (1)
- XPS (1)
- XUV scattering (1)
- ZnO films (1)
- ZnO nanorods (1)
- ZnO nanorods Nanocrystalline (1)
- fs-laser processing (1)
- µ-contact printing (1)
Organisationseinheit der BAM
- 6.2 Material- und Oberflächentechnologien (214) (entfernen)
Paper des Monats
- ja (5)
The presentation summarizes our recent results on the coupled electrochemical methods for high resolution corrosion studies. The combination of Scanning Electrochemical Microscopy (SECM) and multielectrode (MMA) based real-time corrosion monitoring was presented as a new method for achieving high time resolution in local electrochemical analysis. Correlative imaging by means of Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM) was demonstrated as a tool for the investigation of local corrosion processes initiated by the intermetallic particles (IMPs) on AA2024-T3 aluminium alloy.
The performance of functional coatings and adhesively joined hybrid components relies strongly on the stability of the polymer-metal interface. With the increasing utilization of multi-material structures in the automotive and aerospace industry, it is of great scientific and technical interest to understand the processes leading to interface degradation and to develop novel strategies to increase corrosion and delamination resistance.
The aim of this project is to develop thin epoxy-based films and their carbon nanofiller loaded composites on aluminium alloy AA2024-T3 as a model system and to investigate their interfacial stability under corrosive and coupled corrosive-mechanical load. Spin coating was used for the layer-by-layer deposition of poly[(o-cresyl glycidyl ether)-co-formaldehyde] and poly-(ethylenimine) bi-layers. Atomic force microscopy (AFM) results indicate a very homogeneous and dense film with low surface roughness. Carbon nanofillers were introduced either by mixing into the coating components or in between individual layers to control the separation between the carbon nanofillers and alloy surface. The film chemistry and barrier properties were characterized by means of spectroscopic and electrochemical methods, respectively. The degradation and delamination behavior of the epoxy-based films was characterized by means of in situ AFM corrosion experiments. The quantitative imaging (QI) mode allowed the observation of hydrogen-generation induced blister formation during exposure to corrosive electrolyte and how the local corrosion processes evolved with exposure time. Complementary energy dispersive X-ray spectroscopy (EDX) analysis was performed to correlate the corrosion behavior with the different intermetallic particle chemistries and distributions. The presentation will summarize our results on the effect of interface chemistry and carbon nanofiller – alloy separation on the initiation of local corrosion processes on thin film covered AA2024-T3 aluminium alloys.
In service, most materials are operated under simultaneous corrosive and mechanical load and there are very few methods capable for testing material degradation under these conditions, especially when it comes to high resolution analysis. For this purpose, in this work, a tensile module capable of uniaxial stretching and compression with up to 5 kN force was integrated into an AFM stage. The elimination of the need for sample unmounting and remounting and the resulting possibility of keeping the sample under constant mechanical load during AFM measurements not only enables a precise positioning of the area of interest but also allows for the analysis of processes in the elastic deformation regime.
This methodology was demonstrated for two case studies. Scanning Kelvin Probe Force Microscopy (SKPFM) was used as the main tool to characterize the deformation behavior. Moreover, a flexible electrochemical measurement cell was used to enable electrochemical analysis by means of electrochemical impedance spectroscopy (EIS) and Linear Sweep Voltammetry (LSV) during AFM measurements at different levels of strain. The in situ AFM results are complemented by microstructure analysis by means of electron backscatter diffraction (EBSD).
In the first case study, the deformation induced delamination of a thin organic coating on AA2024 T3 aluminium alloy was investigated as a function of alloy surface treatment. The formation of cracks in the insulating passive film enabled an early detection of deformation processes by means of SKPFM. The second case study focused on the comparison of corrosion and deformation behavior of conventional and additively manufactured 316 stainless steels. In comparison to the conventional 316 stainless steel, the effect of processing was clearly detectable on the additively manufactured material as zones of inhomogeneous potential, which also affected the initiation of local corrosion processes. The contribution will provide detailed information on the new AFM setup and summarize our results from both case studies.
Antibiotic resistance is a growing global problem which poses a massive threat to human health. Although human activity contributes to the acceleration of the process, bacteria have a self-driven stabilisation mechanism to protect themselves from such and other external threats: biofilm formation. Nonetheless, it is the adhesion of a single bacterial cell to a surface that triggers the formation of such network of biomolecules and microorganisms, as well as its hazardous consequences. The main objective of this work was to quantify the adhesion force of a single E. coli cell on a Ti substrate via the AFM-related single-cell force spectroscopy, with both the cell and the substrate material being of high clinical relevance. A set of 25 x 25 force displacement curves was acquired with a maximum force of 3.2 nN without dwell time, yielding a topography map and an adhesion force map that showed to be correlated. A mean adhesion force of 0.85 ± 0.175 nN was measured and the presence of cell appendages on the bacterial cell wall was verified through individual force-displacement curves. Bacterial viability was assessed after the measurements via live/dead staining.
Trace elements play an important role in the fine-tuning of complex material properties. This study focuses on the correlation of microstructure, lattice misfit and creep properties. The compositionally complex alloy Al10Co25Cr8Fe15Ni36Ti6 (in at. %) was tuned with high melting trace elements Hf and W. The microstructure consists of a γ matrix, γ' precipitates and the Heusler phase and it is accompanied by good mechanical properties for high temperature applications. The addition of 0.5 at.% Hf to the Al10Co25Cr8Fe15Ni36Ti6 alloy resulted in more sharp-edged cubic γ′ precipitates and an increase in the Heusler phase amount. The addition of 1 at.% W led to more rounded γ′ precipitates and the dissolution of the Heusler phase. The shapes of the γ' precipitates of the alloys Al9.25Co25Cr8Fe15Ni36Ti6Hf0.25W0.5 and Al9.25Co25Cr8Fe15Ni36Ti6Hf0.5W0.25, that are the alloys of interest in this paper, create a transition from the well-rounded precipitates in the alloy with 1% W containing alloy to the sharp angular particles in the alloy with 0.5% Hf. While the lattice misfit has a direct correlation to the γ' precipitates shape, the creep rate is also related to the amount of the Heusler phase. The lattice misfit increases with decreasing corner radius of the γ' precipitates. So does the creep rate, but it also increases with the amount of Heusler phase. The microstructures were investigated by SEM and TEM, the lattice misfit was calculated from the lattice parameters obtained by synchrotron radiation measurements.
The high-throughput synthesis and characterization of potential material combinations plays an important role in accelerating the development of new materials. Diffusion controlled synthesis of gradient alloys is widely used to create phase diagrams, and it is also one of the most effective combinatorial approaches for rapid realization of potential material combinations.
This study focuses on the synthesis and investigation of the quaternary multi-principle-element alloy (MPEA) FeNiCrMn by means of diffusion multiples, the correlation of their microstructural and chemical characterization data with their application relevant properties like local mechanical and corrosion properties. A diffusion system was set up by combining an equimolar ternary alloy (FeNiCr) with a single diffusing metallic component (Mn) with the highest interdiffusion coefficient. Scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) were used to collect microstructural and compositional information which were correlated to local mechanical properties studied with nanoindentation. Local corrosion properties were investigated by means of Atomic Force Microscopy (AFM) and Scanning Electrochemical Microscopy (SECM). We have observed that a >50 μm deep homogeneous diffusion zone was formed the thickness of which scales with the duration of the thermal treatment. Beyond the Mn-concentration gradient in the FeNiCr matrix, a distinct Cr-rich secondary phase, characterized by high hardness and elastic modulus values appeared. We synthesized MPEAs with selected compositions from the diffusion zone as well as the Cr-rich phase as bulk alloys for electrochemical corrosion studies under different environmental conditions. The presentation will summarize the results of our correlative study on the mechanical properties and corrosion resistance of the quaternary multi-principle-element alloy (MPEA) FeNiCrMn family.
The efficient exploration of novel alloy chemistries is crucial for advancing the development of new materials. Diffusion-controlled synthesis of gradient alloys is an intelligent approach for creating phase diagrams and to effectively identify potential material combinations with tailored properties.
This project focusses on the design of quaternary multi-principle-element alloys (MPEAs) using diffusion couples. Our diffusion system contains an equimolar ternary alloy (FeNiCr) and additional single diffusing elements e.g. Mn and Mo. We determined the optimal temperature ranges for the diffusion thermal treatment by means of ThermoCalc simulations with the aim to form single-phase MPEAs. Microstructure and chemical characterization of the diffusion couples were performed by means of scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX). For most alloy couples, the diffusion zone contained a single-phase alloy matrix with diffusion-induced compositional gradient as well as precipitation phases. This heterogeneity makes the diffusion couples interesting materials to investigate local mechanical and corrosion properties. Thus, local corrosion properties were examined using Atomic Force Microscopy (AFM) and Scanning Electrochemical Microscopy (SECM). Nanoindentation was used for the analysis of local mechanical properties.
Based on the results of the local corrosion analysis, we have selected single-phase alloy chemistries along the diffusion zone and reproducibly synthesized these alloys in bulk for detailed corrosion studies by means of potentiodynamic polarization and SECM.
The presentation will briefly summarize our methodology and motivation for using diffusion couples as an efficient tool for exploring phase diagrams of MPEAs in the search for new alloy chemistries and the results of our correlative study on the mechanical and corrosion properties of these materials.