6 Materialchemie
Filtern
Dokumenttyp
Sprache
- Englisch (77)
Referierte Publikation
- ja (77) (entfernen)
Schlagworte
- Laser-induced periodic surface structures (LIPSS) (23)
- Femtosecond laser (7)
- Laser processing (7)
- Radiation protection (7)
- Surface functionalization (7)
- Femtosecond laser ablation (5)
- Corrosion (4)
- Laser-induced X-ray emission (4)
- Silicon (4)
- Femtosecond laser processing (3)
- Laser ablation (3)
- Ultrashort laser material interaction (3)
- Ultrashort pulsed laser (3)
- XANES (3)
- AFM (2)
- Bacterial attachment (2)
- Biofilms (2)
- Chalcopyrite (2)
- Direct laser interference patterning (DLIP) (2)
- Electrochemistry (2)
- Friction (2)
- High entropy alloy (2)
- Laser-induced forward transfer (2)
- Laser-induced oxide layer (2)
- Laser-induced x-ray emission (2)
- Mechanochemistry (2)
- Metal-organic-frameworks (2)
- Microbiologically influenced corrosion (2)
- Nanostructures (2)
- Niobium (2)
- Oxidation (2)
- Passivation (2)
- Polycarbonate (2)
- Stainless steel (2)
- Steel (2)
- Surface modification (2)
- Tribology (2)
- Ultrashort laser pulses (2)
- Wear (2)
- ZnO nanopillars (2)
- ASTM (1)
- AZ31 (1)
- Acid corrosion (1)
- Adhesion by mechanical interlocking (1)
- Alkoxysilanes (1)
- Alloy (1)
- Aluminum alloys (1)
- Amorphization (1)
- Analysis (1)
- Anodization (1)
- Antibacterial surfaces (1)
- Antifriction coefficient (1)
- Applications (1)
- Artificial Intelligence (AI) (1)
- Au/Ag nanoparticles, (1)
- Automation (1)
- Bacterial adhesion (1)
- Bacterial lipopolysaccharides (1)
- Biocorrosion (1)
- Biofilm (1)
- Biofilm formation (1)
- Bioinspiration (1)
- Biomimetic (1)
- Biomimetic surfaces (1)
- Biomimicry (1)
- Bionic materials (1)
- Bulk metallic glasses (1)
- Bulk temperature (1)
- Buried interfaces (1)
- CCMat (1)
- Calamistrum (1)
- Capillary waves (1)
- Carbon dioxide reduction (1)
- Carbon fibers (1)
- Carbon steel corrosion (1)
- Cell appendages (1)
- Ceramic matrix composites (1)
- Chemical analysis (1)
- Chemically Complex Materials (1)
- Coatings (1)
- Coherent exchange (1)
- Conditioning films (1)
- Conservation (1)
- Corrosion monitoring (1)
- Corrosion protection (1)
- Cribellate spiders (1)
- Crystallization (1)
- Cu(In,Ga)Se2 (1)
- Cultural heritage (1)
- Cyclic Voltammetry (1)
- D7755-11 (1)
- Dentistry (1)
- Direct laser interference patterning (1)
- Doped ZnO nanostructures (1)
- Dynamic light scattering (1)
- EIS (1)
- Editorial (1)
- Electrocatalysis (1)
- Electromagnetic theories (1)
- Electron backscattering diffraction (EBSD) (1)
- Electron microscopy (1)
- Electrophoresis (1)
- Electrospinning (1)
- Elektrolyse (1)
- European funding strategies (1)
- Eutectic (1)
- F pili (1)
- Femtosecond laser patterning (1)
- Finite-difference time-domain calculations (1)
- Flow system (1)
- Fluid-flow (1)
- Free electron laser (1)
- Fs-Laser (1)
- Fs-laser patterning (1)
- Fuel sorption (1)
- Functional properties (1)
- Glasses (1)
- Grain orientation (1)
- Grating (1)
- Heat diffusion (1)
- Hexagonally-arranged nano-protrusions (1)
- Hierarchical structures (1)
- High density polyethylene (1)
- Homogenization (1)
- Human fibroblast growth factors (1)
- In situ X-ray diffraction (1)
- In situ atomic force microscopy (1)
- Industrial application (1)
- Industrial applications (1)
- Interfacial stability (1)
- Intrinsically conducting polymers (1)
- Ion beam implantation (1)
- Ion implantation (1)
- Ir DNA staining approach (1)
- Iron (1)
- Iron reducing bacteria (1)
- Large area structuring (1)
- Laser (1)
- Laser Machining (1)
- Laser cleaning (1)
- Laser damage (1)
- Laser-induced nanostructures (1)
- Laser-induced periodic surface strctures (LIPSS) (1)
- Laser-induced periodic surface structures (1)
- Laser-induced periodic surface structures, LIPSS (1)
- Laser-modified surface (1)
- Literature survey (1)
- Local corrosion (1)
- Localised corrosion (1)
- Macroion/growth factor assemblies (1)
- Magnesium alloys (1)
- Material Acceleration Platforms (MAPs) (1)
- Matter reorganization theories (1)
- Medium entropy alloy (1)
- Melting (1)
- Methane (1)
- Methanogen (1)
- Method development (1)
- Micro solar cell (1)
- Micro-concentrator solar cell (1)
- Microbial adhesions (1)
- Microbially influenced corrosion (MIC) (1)
- Microbiological Corrosion (1)
- Microbiological influenced corrosion MIC (1)
- Microencapsulation (1)
- Microscopy (1)
- Microstructures (1)
- Mixed-ligand MOFs (1)
- Modeling (1)
- Modelling (1)
- Morphology control (1)
- Multi-principal element alloys (1)
- Multi-prinicpal element alloys (MPEAs) (1)
- Multilayercoatings (1)
- Multiport (1)
- Nanofibers (1)
- Nanosecond laser (1)
- Nanosecond laser irradiation (1)
- Nanostructuring (1)
- Near-field spectroscopy (1)
- Neurotrophins (1)
- Nobel-metal free electrocatalysis (1)
- Ophthalmology (1)
- Optical near field (1)
- Passive films (1)
- Phase mask (1)
- Phase-contrast microscopy (1)
- Photovoltaics (1)
- Plasmon resonance (1)
- Plasmonic nanofocusing (1)
- Plasmonic nanofocusing spectroscopy (1)
- Poly(acrylic acid) (1)
- Polyelectrolytes (1)
- Polyethylene (1)
- Polyethylene terephthalate (1)
- Polysaccharides (1)
- Polystyrene microparticles (1)
- Protection housing (1)
- Pseudomonas aeruginosa (1)
- Pulse Laser (1)
- Pulsed laser ablation (1)
- Pump-probe experiments (1)
- Resins (1)
- SKPFM (1)
- SPR (1)
- Sc-ICP-ToF-MS (1)
- Scanning Kelvin probe force microscopy (1)
- Scanning electrochemical microscope (SECM) (1)
- Second-generation high temperature superconductor technology (1)
- Secondary hazard (1)
- Self-assembled monolayers (1)
- Self-driving-labs (SDLs) (1)
- Self-lubricating coating (1)
- Self-organization (1)
- Silk (1)
- Single cell (1)
- Sliding (1)
- Spectroscopic imaging ellipsometry (1)
- Spectroscopy (1)
- Spontaneous emulsification (1)
- Stainless Steel (1)
- Structural Materials (1)
- Sulphuric acid (1)
- Superconductivity (1)
- Surface (1)
- Surface analysis (1)
- Surface chemistry (1)
- Surface oxidation (1)
- Surface plasmon polaritons (1)
- Surface processing (1)
- Surface superconductivity (1)
- Surface texture (1)
- Swell-capture (1)
- Thin films (1)
- Ti6Al4V alloys (1)
- Time-resolved scattering (1)
- Titanium (1)
- Transpassive dissolution (1)
- UV-irradiation (1)
- Ultra-short pulse laser processing (1)
- Ultrashort laser processing (1)
- Ultrashort lasers (1)
- Ultrashort pulse laser processing (1)
- Vascular endothelial growth factor (1)
- X-ray emission (1)
- X-ray emission hazards (1)
- X-ray energies (1)
- X-ray photoelectron spectroscopy (1)
- X-ray spectrum (1)
- XPS (1)
- ZnO films (1)
- ZnO nanorods Nanocrystalline (1)
Organisationseinheit der BAM
- 6.2 Material- und Oberflächentechnologien (77) (entfernen)
Paper des Monats
- ja (4)
Multi-principal element alloys (MPEAs) are gaining interest in corrosion and electrocatalysis research due to their electrochemical stability across a broad pH range and the design flexibility they offer. Using the equimolar CrCoNi alloy, we observe significant metal dissolution in a corrosive electrolyte (0.1 M NaCl, pH 2) concurrently with the oxygen evolution reaction (OER) in the transpassive region despite the absence of hysteresis in polarization curves or other obvious corrosion indicators. We present a characterization scheme to delineate the contribution of OER and alloy dissolution, using scanning electrochemical microscopy (SECM) for OER-onset detection, and quantitative chemical analysis with inductively coupled-mass spectrometry (ICP-MS) and ultraviolet visible light (UV-Vis) spectroscopy to elucidate metal dissolution processes. In-situ electrochemical atomic force microscopy (EC-AFM) revealed that the transpassive metal dissolution on CrCoNi is dominated by intergranular corrosion. These results have significant implications for the stability of MPEAs in corrosion systems, emphasizing the necessity of analytically determining metal ions released from MPEA electrodes into the electrolyte when evaluating Faradaic efficiencies of OER catalysts. The release of transition metal ions not only reduces the Faradaic efficiency of electrolyzers but may also cause poisoning and degradation of membranes in electrochemical reactors.
Corrosion behaviour of AlCrFe2Ni2Mox (x = 0.0, 0.1, 0.15, 0.3 and 0.6) high-entropy alloys was investigated in a 0.1 M H2SO4 solution. Passive films formed upon anodic polarisation, built of Al-based inner layer and (Cr, Fe, Mo)-based outer layer, had good protective properties. In particular, they prevented corrosion of the (Al, Ni)-rich BCC-B2 phase, which was observed under open-circuit conditions. Moderate amounts of Mo, up to x = 0.3, positively affected the passivation ability of AlCrFe2Ni2. Significant changes in microstructure and phase composition of the alloy at higher Mo concentrations (x = 0.6) resulted in deterioration of its corrosion resistance.
Irradiation of solid surfaces with high intensity, ultrashort laser pulses triggers a variety of secondary processes that can lead to the formation of transient and permanent structures over a large range of length scales from mm down to the nano‐range. One of the most prominent examples are LIPSS – Laser‐Induced Periodic Surface Structures. While LIPSS have been a scientific evergreen for of almost 60 years, experimental methods that combine ultrafast temporal with the required nm spatial resolution have become available only recently with the advent of short pulse, short wavelength free electron lasers. Here, the current status and future perspectives in this field are discussed by exploiting the unique possibilities of these 4th‐generation light sources to address by time‐domain experimental techniques the fundamental LIPSS‐question, namely why and how laser irradiation can initiate the transition of a “chaotic” (rough) surface from an aperiodic into a periodic structure.
The cleaning of aged silk fibers poses a common challenge in the conservation of textiles, since traditional cleaning techniques often yield unsatisfactory results or even harm objects. In this regard, cleaning objects with laser radiation is a promising addition to the range of available methods. Due to it being contactless, even brittle and touch-sensitive objects with disfiguring or harmful soiling could potentially be cleaned and therefore made accessible for research and presentation. Examples of treatment have sometimes shown spectacular results. Still there is some skepticism concerning the safety of this treatment for textile materials, which has been strengthened through previous 532 nm wavelength nanosecond laser cleaning studies on silk fibers. Taking these published results into account, the range of examined laser parameters has been extended in this study, from 532 nm nanosecond laser to 1064 nm nanosecond and even 800 nm femtosecond laser, reevaluating the effect of this treatment on the fibers. The physicochemical processes taking place on the silk fibers when cleaning with lasers are complex and still not fully understood. The aim of this project was therefore to bring more clarification about potential effects of those processes on the condition of silk samples treated with a set of different parameters for wavelength, pulse duration, energy density and number of pulses per spot. It also looks at the influence of the presence of soiling on the results. The analysis of potential effects was then carried out using statistical methods and advanced analytics. Scanning electron microscopy, Fourier-transform infrared spectroscopy and colorimetry technology provided the required insights to better assess the effects. Results show that laser cleaning of silk fibers, like most other conventional cleaning techniques, is not completely without risk, but knowing what the possible effects are helps making decisions on whether the benefits of the technique used justify these risks.
Noble metal-free nanoparticles (NPs) based on multi-principal element alloys (MPEAs) were synthesized using a one-step pulsed laser ablation in liquids (PLALs) method for the electrochemical reduction of CO2. Laser ablation was performed in pure water or poly-(diallyldimethylammonium chloride) (PDADMAC)-containing an aqueous solution of Al8Cr17Co17Cu8Fe17Ni33 MPEA targets. Transmission electron microscopy (TEM) measurements combined with energy dispersive X-ray (EDX) mapping were used to characterize the structure and composition of the laser-generated MPEA nanoparticles (MPEA-NPs). These results confirmed the presence of a characteristic elemental distribution of a core-shell phase structure as the predominant NP species. The electrocatalytic performance of the laser-generated MPEA-NPs was characterized by linear sweep voltammetry (LSV) demonstrating an enhanced electrocatalytic CO2 activity for PDADMAC-stabilized NPs. The findings of these investigations indicate that MPEAs have great potential to replace conventional, expensive noble metal electrocatalysts.
The polarization of the laser beam exhibits more substantial differences in laser micromachining as the angle of incidence deviates from zero. In the reported work, our focus was to explore the effects of circularly, p- and s-polarized laser on angled ultrashort pulse laser micromachining of micropillar arrays. The examination encompassed laser process factors, including angles of incidence, microstructure dimensions, and inter-pillar spacing. A comparison between the resulting structures demonstrated that p-polarized laser beam was the most efficient in material removal in angled laser micromachining, followed by circularly polarized laser. While the s-polarized beam exhibited the lowest ablation efficiency among the three. Such distinction is mainly attributed to the distinguishing reflectivity of the three states of polarization on tilted planes. The development of structural heights during ablation processes was examined, and potential defects in laser processing methodologies were interpreted. The dependency of structural heights on inter-pillar spacing was analyzed. This study bridges the gap between existing studies on angled ultrashort pulse laser machining and the influences of polarization on laser machining. The comparison between structures produced using laboratory-scale and industrial-scale laser systems also yielded pertinent recommendations for facilitating a smooth transition of angled laser micromachining from laboratory-scale research to industrial applications.
Laser-induced periodic surface structures (LIPSS) represent a unique route for functionalizing materials through the fabrication of surface nanostructures. Commercial AISI 316L stainless steel (SS316L) surfaces are laser treated by ultraviolet 300 ps laser pulses in a laser line scanning (LLS) approach. Processing parameters are optimized (pulse energy of 2.08 µJ, pulse repetition frequency of 300 kHz, and suitable laser scan and sample displacement rates) for the generation of low spatial frequency LIPSS over a large 25 × 25 mm2 area. Different angles of incidence of the laser radiation (0°, 30°, and 45°) and different linear laser beam polarizations (s and p) produce a plethora of rippled surface morphologies at distinct grains. Scanning electron microscopy and 2D Fourier transforms, together with calculations of the optical energy deposited at the treated surfaces using Sipe's first-principles electromagnetic scattering theory, are used to study and analyze in detail these surface morphologies. Combined with electron backscattering diffraction, analyses allow associating site-selectively various laser-induced-surface morphologies with the underlying crystalline grain orientation. Resulting grain orientation maps reveal a strong impact of the grain crystallographic orientation on LIPSS formation and point toward possible strategies, like multi-step processes, for improving the manufacturing of LIPSS and their areal coverage of polycrystalline technical materials.
Bacterial biofilms pose serious problems in medical and industrial settings. One of the major societal challenges lies in the increasing resistance of bacteria against biocides used in antimicrobial treatments, e.g., via overabundant use in medicine, industry, and agriculture or cleaning and disinfection in private households. Hence, new efficient bacteria-repellent strategies avoiding the use of biocides are strongly desired. One promising route to achieve bacteria-repellent surfaces lies in the contactless and aseptic large-area laser-processing of technical surfaces. Tailored surface textures, enabled by different laser-processing strategies that result in topographic scales ranging from nanometers to micrometers may provide a solution to this challenge. This article presents a current state-of-the-art review of laser-surface subtractive texturing approaches for controlling the biofilm formation for different bacterial strains and in different environments. Based on specific properties of bacteria and laser-processed surfaces, the challenges of anti-microbial surface designs are discussed, and future directions will be outlined.
Bulk metallic glasses (BMG) are amorphous metal alloys known for their unique physical and mechanical properties. In the present study, the formation of femtosecond (fs) laser-induced periodic surface structures (LIPSS) on the Zr-based BMGs Zr46Cu46Al8, Zr61Cu25Al12Ti2, Zr52.5Cu17.9Al10Ni14.6Ti5 (Vit105) and Zr57Cu15.4Al10Ni12.6Nb5 (Vit106) was investigated as a function of their different chemical composition. For this purpose, LIPSS were generated on the sample surfaces in an air environment by fs-laser irradiation (λ = 1025 nm, τ = 300 fs, frep = 100 kHz). The surface topography was characterized by scanning electron microscopy and atomic force microscopy. Moreover, the impact of LIPSS formation on the structure and chemical surface composition was analyzed before and after fs-laser irradiation by X-ray diffraction and X-ray photoelectron spectroscopy as well as by transmission electron microscopy in combination with energy dispersive X-ray spectroscopy. Despite the different chemical composition of the investigated BMGs, the fs-laser irradiation resulted in almost similar properties of the generated LIPSS patterns. In the case of Zr61Cu25Al12Ti2, Vit105 and Vit106, the surface analysis revealed the preservation of the amorphous state of the materials during fs-laser irradiation. The study demonstrated the presence of a native oxide layer on all pristine BMGs. In addition, fs-laser irradiation results in the formation of laser-induced oxide layers of larger thickness consisting of an amorphous ZrAlCu-oxide. The precise laser-structuring of BMG surfaces on the nanoscale provides a versatile alternative to thermoplastic forming of BMG surfaces and is of particular interest for the engineering of functional material surfaces.
Outer membrane lipopolysaccharides (LPS) play a crucial role in determining attachment behavior and pathogenicity of bacteria. The aim of this study was to develop a simple procedure for anchoring bacterial lipopolysaccharides to polystyrene (PS) microparticles as a model system for in situ attachment studies. By using a swellcapture methodology, commercially available LPS of Pseudomonas aeruginosa (strain ATCC 27316 serotype 10.22) was anchored onto PS microparticles in a proof-of-concept study. A detailed chemical and morphological characterization has proven the success of LPS incorporation. It was shown that the coverage and structure of the LPS film was concentration dependent. The procedure can easily be adapted to LPS of other bacterial strains to generate a synthetic model toolkit for attachment studies.