5.5 Materialmodellierung
Filtern
Dokumenttyp
- Vortrag (45)
- Zeitschriftenartikel (44)
- Beitrag zu einem Tagungsband (12)
- Posterpräsentation (4)
- Forschungsdatensatz (3)
- Buchkapitel (2)
- Dissertation (1)
- Forschungsbericht (1)
Sprache
- Englisch (98)
- Deutsch (13)
- Französisch (1)
Schlagworte
- CALPHAD (9)
- Creep (9)
- Nickel-base superalloys (8)
- Fatigue (7)
- LCF (7)
- Thermomechanical fatigue (7)
- Additive manufacturing (6)
- Crack growth (6)
- Crystal plasticity (6)
- Anisotropy (5)
- HIP (5)
- Microstructure (5)
- Crack tip opening displacement (4)
- Data Fusion (4)
- Finite element analysis (4)
- Microstrucrue Design (4)
- Microstructure Design (4)
- Scale-bridging (4)
- Virtual experiments (4)
- Concrete (3)
- Crack (3)
- Crack propagation (3)
- Dislocation (3)
- EBSD (3)
- Ferritic-martensitic steels (3)
- Fracture mechanics (3)
- Grain boundary engineering (3)
- Low cycle fatigue (3)
- Phase-field (3)
- Phase-field simulation (3)
- Residual stress (3)
- Single-crystals (3)
- Superalloy (3)
- Viscoplasticity (3)
- Additive Fertigung (2)
- Additive Manufacturing (2)
- Ageing (2)
- Alterung (2)
- Characterization (2)
- Continnum damage model (2)
- Cyclic softening (2)
- Damage (2)
- Degradation (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Diffusion (2)
- Dislocations (2)
- Distribution function (2)
- Elasticity (2)
- Environmental stress cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Grain boundaries (2)
- Kriechen (2)
- Machine Learning (2)
- Mass transport (2)
- Materials Modelling (2)
- Micromechanical model (2)
- Microstructural characterization (2)
- Monte-Carlo Simulation (2)
- Notches (2)
- Ontology (2)
- P92 (2)
- Parametric modeling (2)
- Phase-Field Simulations (2)
- Refractory high entropy alloys (2)
- Safety assessment (2)
- Scanning electron microscopy (2)
- Simulation (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Steels (2)
- Superalloys (2)
- Superlegierung (2)
- Symmetric dwell periods (2)
- Thermodynamics (2)
- Transmission electron microscopy (2)
- Transmission electron microscopy (TEM) (2)
- Under cyclic loading (2)
- Weibull Distribution (2)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AGIL (1)
- AM (1)
- Abgasturbolader Heißteile (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Adiabatic shear bands (1)
- Aging (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alloys' Safety (1)
- Atomistic Simulation (1)
- Aussonderugnsrate (1)
- Austenitic cast iron (1)
- Austenitischer Stahl (1)
- Automated finite element analysis (1)
- Automatische Finite Element Simulation (1)
- Berstdruck (1)
- Betriebsfestigkeit (1)
- Brittle fracture (1)
- Burst (1)
- Burst test (1)
- CALPHAD database analysis (1)
- CMSX4 (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Co-segregation (1)
- Composite pressure vessels (1)
- Contact mechanics (1)
- Creep anisotropy (1)
- Creep-fatigue (1)
- Crystal Defects (1)
- Crystal Plasticity Modelling (1)
- Cycle jump (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Data Management (1)
- Data Structures (1)
- Data structure (1)
- Datenfusion (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation mechanisms (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Directional grain growth (1)
- EXAFS (1)
- Eigenspannung (1)
- Elastic constants (1)
- Elastic energy (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron microscopy (1)
- End of life (1)
- Entwicklung (1)
- Environmental Stress Cracking (1)
- FCH JU (1)
- FNCT (1)
- Failure rate (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Fe-Mn steels (1)
- Ferritic–martensitic steel (1)
- Finite-Elemente-Methode (1)
- Fourier series (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Full notch creep test (FNCT) (1)
- Full-Notch Creep Test (1)
- Full-Notch Creep Test (FNCT) (1)
- Full-notch creep test (1)
- Fullerite (1)
- Global stability criterion (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Heat Treatments (1)
- Hertzian cracks (1)
- High Entropy Alloys (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- Hochtemperaturermüdung (1)
- Horizon 2020 (1)
- Hot isostatic pressing (HIP) (1)
- Hydrogen (1)
- IN738LC (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Interfacial Spinodal (1)
- Interfacial anisotropy (1)
- Isostatic hot pressing (HIP) (1)
- Knowledge Representation (1)
- L-PBF 316L (1)
- Laser beam melting (LBM) (1)
- Laser powder bed fusion (1)
- Laser scanning microscopy (LSM) (1)
- Lattice distortions (1)
- Liquid Metal Embrittlement (1)
- Liquid-metal embrittlement (1)
- Long-term aging (1)
- Low strain (1)
- Machine learning (1)
- Material digital (1)
- Material modeling (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical testing (1)
- Mechanische Eigenschaften (1)
- Mechanistic Modelling (1)
- Mehrskalenmodell (1)
- Microstructural evolution (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Mikrostruktur (1)
- Mindedestberstdruck (1)
- Misfitting precipitate (1)
- Model (1)
- Modeling (1)
- Modell (1)
- Molecular Dynamics (1)
- Monte-Carlo-Analysis (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- Nanoparticles (1)
- Net zero (1)
- Ni-Resist (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Nickel-base superalloy (1)
- Non-destructive testing (1)
- Numerische Simulation (1)
- Ontologie (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Ordering (1)
- Ostwald ripening (1)
- P92 steels (1)
- PE-HD (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase field model (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field modelling (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Plasticity (1)
- Polyethylene (1)
- Polyethylene, PE-HD (1)
- Pore (1)
- Pores (1)
- Porosity (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitation (1)
- Production scatter (1)
- Rafting (1)
- Refractory superalloys (1)
- Relaxation fatigue (1)
- Resistance spot welding (1)
- Restberstfestigkeit (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissverlauf (1)
- S-phase (1)
- S355 steel sheet (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Semantisches Web (1)
- Short-range order (1)
- Single crystal superalloys (1)
- Single-crystal (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Strain energy (1)
- Streuung (1)
- Surface-induced Melting (1)
- TAHYA (1)
- TEM (1)
- TMF (1)
- Tempered Martensite Ferritic Steels (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile test (1)
- Tensile testing (1)
- Thermo-Mechanical Fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermographie (1)
- Thermomechanische Ermüdung (1)
- Turbine disk (1)
- Vacancies (1)
- Viskoplastisch (1)
- Wissensrepräsentation (1)
- X-Ray Diffraction (1)
- Zugversuch (1)
- ausfgallfreie Lastwechsel (1)
- statistische Auswertung (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (112) (entfernen)
Paper des Monats
- ja (3)
Eingeladener Vortrag
- nein (45)
The heat-resistant cast iron EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S) was investigated for its fatigue crack growth behavior at room and high temperatures. Force-controlled tests were carried out at constant temperatures (20 °C, 500 °C, 700 °C) without and with hold time and different load ratios. The crack growth behavior was also characterized under TMF loading (Tmin = 400 °C, Tmax = 700 °C) by applying IP and OP conditions and different load ratios. Three different techniques were combined to monitor crack growth: potential drop, thermography, and compliance method. The effect of the different loading conditions on the fatigue crack growth behavior will be presented and discussed.
This is the stable version of the full-notch creep test ontology (OntoFNCT) that ontologically represents the full-notch creep test. OntoFNCT has been developed in accordance with the corresponding test standard ISO 16770:2019-09 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).
The OntoFNCT provides conceptualizations that are supposed to be valid for the description of full-notch creep tests and associated data in accordance with the corresponding test standard. By using OntoFNCT for storing full-notch creep test data, all data will be well structured and based on a common vocabulary agreed on by an expert group (generation of FAIR data) which is meant to lead to enhanced data interoperability. This comprises several data categories such as primary data, secondary data and metadata. Data will be human and machine readable. The usage of OntoFNCT facilitates data retrieval and downstream usage. Due to a close connection to the mid-level PMD core ontology (PMDco), the interoperability of full-notch creep test data is enhanced and querying in combination with other aspects and data within the broad field of materials science and engineering (MSE) is facilitated.
The class structure of OntoFNCT forms a comprehensible and semantic layer for unified storage of data generated in a full-notch creep test including the possibility to record data from analysis and re-evaluation. Furthermore, extensive metadata allows to assess data quality and reliability. Following the open world assumption, object properties are deliberately low restrictive and sparse.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
Additive manufacturing (AM) offers significantly greater freedom of design compared to conventional manufacturing processes since the final parts are built layer by layer. This enables metal AM, also known as metal 3D printing, to be utilized for improving efficiency and functionality, for the production of parts with very complex geometries, and rapid prototyping. However, despite many technological advancements made in recent years, several challenges hinder the mass adoption of metal AM. One of these challenges is mechanical anisotropy which describes the dependency of material properties on the material orientation. Therefore, in this work, stainless steel 316L parts produced by laser-based powder bed fusion are used to isolate and understand the root cause of anisotropy in AM parts. Furthermore, an efficient and accurate multiscale numerical framework is presented for predicting the deformation behavior of actual AM parts on the macroscale undergoing large plastic deformations. Finally, a novel constitutive model for the plastic spin is formulated to capture the influence of the microstructure evolution on the material behavior on the macroscale.
A density-based phase field model is developed where the free energy functional is explicitly linked with molecular dynamics and is referred to as the Molecular Phase Field Method (MoPF). MoPF simulations involve expressing interatomic potentials in terms of density to form a density based free energy functional. Inputs to this functional are taken from atomistics such that the phase field density profile matches the corresponding density profile from atomistic simulations. We analyze our results by comparing the MoPF calculated excess interfacial energies with excess interfacial energies calculated using molecular dynamics associated with several nickel grain boundaries. Additionally, a comparison is made between our results and the interfacial energies of a \Sigma7 boundary across a variety of FCC systems simulated using density functional theory. The MoPF method is able to successfully predict grain boundary free energy trends between grain boundary and material types offering an atomistically informed mesoscale formulation for studying grain boundary physics.
Mean-field modeling and phase-field simulation of grain growth under directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> α tⁿ with an exponent n ~ 0.6–0.7. The exponent n exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n ≈ 0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.
The dataset provided in this repository comprises data obtained from a series of full-notch creep tests (FNCT) performed on selected high-density polyethylene (PE-HD) materials (for further details, see section 1 Materials in this document) in accordance with the corresponding standard ISO 16770.
The FNCT is one of the mechanical testing procedures used to characterize polymer materials with respect to their environmental stress cracking (ESC) behavior. It is widely applied for PE-HD materials, that are predominantly used for pipe and container applications. It is based on the determination of the time to failure for a test specimen under constant mechanical load in a well-defined and temperature controlled liquid environment. The test device used here also allows for continuous monitoring of applied force, specimen elongation and temperature.
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modeling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.
Results of an extended TMF test program on grade P92 steel in the temperature range of 620 ◦C–300 ◦C, comprising in-phase (IP) and out-of-phase (OP) tests, partly performed with symmetric dwells at Tmax/Tmin, are presented. In contrast to previous studies, the low-strain regime is also illuminated, which approaches flexible operation in a power plant with start/stop cycles. At all strain amplitudes, the material performance is characterized by continuous cyclic softening, which is retarded in tests at lower strains but reaches similar magnitudes in the course of testing. In the investigated temperature range, the phase angle does not affect fatigue life in continuous experiments, whereas the IP condition is more detrimental in tests with dwells. Fractographic analyses indicate creep-dominated and fatigue-dominated damage for IP and OP, respectively. Analyses of the (micro)hardness distribution in the tested specimens suggest an enhanced microstructural softening in tests with dwell times for the low- but not for the high-strain regime. To rationalize the obtained fatigue data, the fracturemechanics-based DTMF concept, which was developed for TMF life assessment of ductile alloys, was applied. It is found that the DTMF parameter correlates well with the measured fatigue lives, suggesting that subcritical growth of cracks (with sizes from a few microns to a few millimeters) governs failure in the investigated range of strain amplitudes.
Inconel 718 (IN718) is a traditional age-hardenable nickel-based alloy that has been increasingly processed by additive manufacturing (AM) in recent years. In the as-solidified condition, IN718 exhibits chemical segregation and the undesired Laves phase, requiring a solution annealing (SA) prior to aging. The material produced by AM does not respond to the established thermal routines in the same way as conventionally produced IN718, and there is still no consensus on which routine yields optimal results. This work aims to provide a fundamental understanding of the heat treatment (HT) response by continuously monitoring the microstructural evolution during SA via time-resolved synchrotron x-ray diffraction, complemented by ex-situ scanning electron microscopy (SEM). The samples were produced by laser powder bed fusion to a geometry of 10x20x90 mm³, from which Ø1x5 mm³ cylindric specimens were extracted. Two different scanning strategies – incremental 67° rotations, Rot, and alternating 0°/67° tracks, Alt – were used, leading to two different as-built conditions. 1-hour SAs were carried out in the beamline ID22 of the ESRF at 50 KeV. Two SA temperatures, SA1 = 1020 °C, and SA2 = 1080 °C were tested for each scanning strategy. Data were processed using the software PDIndexer. In the as-built state, all samples showed typical subgrain columnar cell structures with predominant Nb/Mo segregation and Laves phase at the cell walls, as seen by SEM. The Alt scan induced higher intensity on the Laves peaks than the Rot scan, suggesting a greater content of Laves. Chemical homogenization in the SA was largely achieved during the heating ramp (Fig. 1). SA2 eliminated the Laves peaks just before reaching 1080 °C, and mitigated differences between Rot and Alt samples. On the other hand, SA1 induced the precipitation of the generally detrimental δ phase, also observed by SEM. Furthermore, the Rot scan showed higher δ peak intensities than the Alt scan, indicating a higher content of δ in the latter. No signs of recrystallization were observed in any of the investigated SAs.