5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (355) (entfernen)
Sprache
- Englisch (348)
- Mehrsprachig (5)
- Deutsch (1)
- Russisch (1)
Referierte Publikation
- ja (355) (entfernen)
Schlagworte
- Additive manufacturing (21)
- EBSD (16)
- Microstructure (14)
- Additive Manufacturing (13)
- Corrosion (12)
- Residual stress (12)
- Transmission electron microscopy (12)
- Creep (11)
- Glass (9)
- Crystallization (8)
- Mechanical properties (7)
- Sintering (7)
- Steel (7)
- Aging (6)
- Carbon steel (6)
- Fatigue (6)
- High entropy alloy (6)
- High temperature corrosion (6)
- SEM (6)
- 3D printing (5)
- Bioactive glass (5)
- Degradation (5)
- Electron microscopy (5)
- High entropy alloys (5)
- Laser powder bed fusion (5)
- Metallic glasses (5)
- Neutron diffraction (5)
- Ontology (5)
- Oxidation (5)
- Plasticity (5)
- Alumina (4)
- CALPHAD (4)
- Ceramics (4)
- EXAFS (4)
- Electron backscatter diffraction (4)
- Fracture (4)
- HIP (4)
- Impurities (4)
- Kikuchi patterns (4)
- Lattice parameters (4)
- Martensite (4)
- Metallic glass (4)
- Nanoindentation (4)
- Plastic deformation (4)
- Scanning electron microscopy (4)
- Single crystal (4)
- Vickers indentation (4)
- X-ray diffraction (4)
- Zirconia (4)
- 3D-Printing (3)
- AISI 316L (3)
- Calcination (3)
- Carbon fibres (3)
- Ceramic (3)
- Dislocation (3)
- Environmental stress cracking (ESC) (3)
- Finite element analysis (3)
- Fracture toughness (3)
- Full notch creep test (FNCT) (3)
- General Materials Science (3)
- Glass transition (3)
- Grain boundary (3)
- Inconel 718 (3)
- Interfacial strength (3)
- Iron (3)
- Laser scanning microscopy (LSM) (3)
- Molecular dynamics (3)
- NMR spectroscopy (3)
- Nanoparticles (3)
- Nickel-based superalloys (3)
- Pattern matching (3)
- Phase-field simulation (3)
- Raman spectroscopy (3)
- Reproducibility (3)
- Self-healing (3)
- Stress intensity factor (3)
- Stress relaxation (3)
- Superalloy (3)
- TEM (3)
- Thermal expansion (3)
- Ti-6Al-4V (3)
- X-ray refraction (3)
- 3D-printing (2)
- AGIL (2)
- AISI 304L (2)
- Alloy design (2)
- Aluminum alloys (2)
- Atom probe tomography (2)
- Bacteria (2)
- Binder jetting (2)
- Bioactivity (2)
- Bioceramics (2)
- Bone regeneration (2)
- Bulk metallic glasses (2)
- CCS (2)
- CCUS (2)
- Calcium cobaltite (2)
- Characterization (2)
- Compositionally complex alloys (2)
- Computed Tomography (2)
- Computed tomography (2)
- Condensate (2)
- Coulomb explosion (2)
- CrCoNi (2)
- Crack growth (2)
- Crack healing (2)
- Crack propagation (2)
- Crop protection products (2)
- Crystal orientation (2)
- Crystal plasticity (2)
- Debinding (2)
- Deep Learning (2)
- Defects (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Deuterium (2)
- Diffusion (2)
- Diopsid (2)
- Elastic constants (2)
- Environmental stress cracking (2)
- Foaming (2)
- Fractography (2)
- Fracture mechanics (2)
- GFRP (2)
- Geothermal (2)
- Glass ceramic (2)
- Glass-ceramic (2)
- Gold (2)
- Grain boundaries (2)
- Heat treatment (2)
- High-density polyethylene (2)
- High-entropy alloy (2)
- High-temperature corrosion (2)
- Hydrogen (2)
- IN718 (2)
- Infrared spectroscopy (2)
- Internal friction (2)
- Interphase (2)
- Kikuchi diffraction (2)
- Kikuchi pattern (2)
- LPBF (2)
- LTCC (2)
- Laser Powder Bed Fusion (2)
- Lattice distortion (2)
- Layerwise slurry deposition (2)
- Low cycle fatigue (2)
- Lunar regolith (2)
- Machine Learning (2)
- Mars (2)
- Martensitic transformation (2)
- Mechanical Engineering (2)
- Mechanics of Materials (2)
- Microhardness (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure and texture (2)
- Microstructure evolution (2)
- Mobility (2)
- Modeling (2)
- Native oxide (2)
- Nickel alloys (2)
- Nickel-base superalloys (2)
- Ontologies (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- P92 (2)
- Permeability (2)
- Phase transformations (2)
- Phase-field (2)
- Polyethylene (2)
- Polymer (2)
- Preceramic polymer (2)
- Precipitation (2)
- Pressure-assisted sintering (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Reaction-sintering (2)
- Relaxation (2)
- S-Phase (2)
- SIMS (2)
- Sample preparation (2)
- Selective laser melting (2)
- Shape-memory alloys (2)
- Shear bands (2)
- Short-range order (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single-crystals (2)
- Slow crack growth (SCG) (2)
- Sorption (2)
- Spray drying (2)
- Stress corrosion cracking (2)
- Sulfidation (2)
- Sulphidation (2)
- Superalloys (2)
- Superconducting magnet (2)
- Surface treatments (2)
- Tempered martensite-ferritic steel (2)
- Tensile properties (2)
- Tensile testing (2)
- Texture (2)
- Thermodynamics (2)
- Thermoelectric properties (2)
- Thermography (2)
- ToF-SIMS (2)
- Toughness (2)
- Transmission electron microscopy (TEM) (2)
- Viscosity (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- 12%Cr steel (1)
- 316L (1)
- 316L stainless steel (1)
- 3D etching (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 9-12%Cr steel (1)
- Abrasion (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Advanced high strength steels (1)
- Ageing (1)
- Aggressive environments (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al2O3 (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alloy (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alumina coatings (1)
- Aluminium alloys (1)
- Aluminosilicate glasses (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Amorphization (1)
- Analytical scanning electron microscopy (1)
- Angle measurement (1)
- Approximant (1)
- Aquifer fluid (1)
- Artificial weathering (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic steel 316L (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated image analysis (1)
- BTEX (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Biaxial strength (1)
- Bimodal distribution (1)
- Binder Jetting (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio Ceramics (1)
- Bio active ceramic (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Biodiesel (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Biosensor (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Brinell hardness (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bruchflächen (1)
- Bubble formation (1)
- Burst (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CKAN (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calculated intrinsic fracture toughness (1)
- Carbide phase NbC (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon capture (1)
- Carbon capture and storage (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon nanotubes (1)
- Casing (1)
- Cavitation (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement (1)
- Cement-based materials (1)
- Ceramic multilayer (1)
- Ceramic multilayers (1)
- Cerium oxide (1)
- Chalcogenides (1)
- Characterisation (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Chemometrics (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-firings (1)
- Coating (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Composite recycling (1)
- Compositionally complex alloy (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Cooling rate (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion costs (1)
- Corrosion fatigue (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- CrMnFeCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack evolution (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Crack tip opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB (1)
- DCB geometry (1)
- Damage (1)
- Data Interoperability (1)
- Data analysis (1)
- Data infrastructures (1)
- Data mapping (1)
- Data pipeline (1)
- Data processing (1)
- Datenbank (1)
- Debonding (1)
- Defect population (1)
- Defects engineering (1)
- Deformation (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Dental (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Destabilization (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Diesel (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Digitalizations (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Discrete element method (1)
- Dislocation avalanches (1)
- Disorientation (1)
- Distributed fiber optic sensing (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Dry preparation (1)
- Drywood termite (1)
- Ductile iron (1)
- Dwell periods (1)
- Dwell times (1)
- Dynamic recrystallization (1)
- EFTEM (1)
- EN AW-2618A (1)
- Early oxidation (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Elastic energy (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elasticity (1)
- Electric conductivity (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron beam-induced charging (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron energy (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Energy distribution (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmentally assisted cracking (1)
- Epitaxial films (1)
- Epoxy (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR principles (1)
- FAIR research data management (1)
- FIB Tomography (1)
- FSDC (1)
- Fabrication (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Fatigue Testing (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue performance (1)
- Fatigue striations (1)
- Fatigue testing (1)
- Fe-Mn steels (1)
- Femtosecond laser (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Filters (1)
- Finite element method (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- Flowability (1)
- Four-point bending test (1)
- Fourier series (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fraktographie (1)
- Freeze casting (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (1)
- Full notch creep test (1)
- Fullerite (1)
- Fungi (1)
- GD-OES (1)
- GMR (1)
- GMR sensors (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- General Computer Science (1)
- General Engineering (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming (1)
- Glass forming melts (1)
- Glass manufacturing (1)
- Glass powder (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary engineering (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granules (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- HEA (1)
- Hardness (1)
- Hausner ratio (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High alloyed steel (1)
- High density polyethylene (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Homogenization (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen storage (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- IASCC (1)
- IN 718 (1)
- ISRU (1)
- Impact damage (1)
- Impact wear (1)
- In situ diffraction (1)
- In situ tensile test (1)
- In situ thermal-annealing experiment (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interfacial shear strength (1)
- Interlaboratory comparability (1)
- Intermetallic (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperable (1)
- Intrinsic stress (1)
- Invar (1)
- Ion beam erosion Sectioning (1)
- Ionic porosity (1)
- Iron meteorite (1)
- Irradiation (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kidney injury (1)
- Kikuchi bands (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- LIBS (1)
- LSD print (1)
- Laboratory X-ray diffraction (1)
- Laser (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser ablation in liquid (1)
- Laser beam melting (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser powder-based directed energy deposition (1)
- Lateral flow (1)
- Lattice distortions (1)
- Lattice misfit (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Laves phase (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Li-ion battery (1)
- Light curing (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Long-term storage (1)
- Lorenz transmission electron microscopy (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-cycle fatigue (1)
- Low-loading (1)
- MEA (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- MOUSE (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Manufacturing (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Mass transport (1)
- Master curve (1)
- Material degradation (1)
- Material failure (1)
- Material modeling (1)
- Materials Modelling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical deformation (1)
- Medium Entropy Alloys (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Melt pool boundary (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metallic Glass (1)
- Metallic materials (1)
- Methodology (1)
- Micro-shrinkages (1)
- Microplastic stress (1)
- Microplastics (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural evolution (1)
- Microstructure Design (1)
- Microstructure analysis (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Milling (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Mixed Ca-K-Na phosphates (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Model (1)
- Moisture (1)
- Molten salt (1)
- Moon (1)
- Multiaxial deformation (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NGS (1)
- Na and K rhenanites (1)
- Nano-composite (1)
- Nano-powder (1)
- Nano-scratch test (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterials (1)
- Nanoparticle structure (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure quantification (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Neutron Diffraction (1)
- NiMaGa (1)
- NiTi (1)
- Nickel-base alloy (1)
- Niobium alloying (1)
- Nitride (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Notch (1)
- Nucleation (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Optical and Magnetic Materials (1)
- Optical centrifugation (1)
- Optical criterion of brittleness (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxygen evolution reaction (1)
- PBF-LB/M/316L (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Parametric modeling (1)
- Particle morphology (1)
- Particle size (1)
- Particle-bed binder jetting (1)
- Passive components and circuits (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase separation (1)
- Phase stability (1)
- Phase transformation (1)
- Phase-Field Simulations (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platinum-group-metals (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Porcelain (1)
- Pore (1)
- Pores (1)
- Porosification (1)
- Porosity (1)
- Porous materials (1)
- Portable sensor (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Power factor (1)
- Power law (1)
- Precipitate shape (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Pseudosymmetry (1)
- Pultruded fiber rods (1)
- Radon transform (1)
- Reaction Sintering (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Recommendations (1)
- Recycling (1)
- Reference data (1)
- Refractory alloy (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Reliability (1)
- Residual Stress (1)
- Residual strains (1)
- Residual stresses (1)
- Resistance spot welding (1)
- Resonance testing (1)
- Reusable data (1)
- Review (1)
- Roughness (1)
- Round Robin (1)
- S-phase (1)
- SDC (1)
- SEM micrography (1)
- SLM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Safety assessment (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Schadensanalyse (1)
- Schwingstreifen (1)
- Scratches (1)
- Segregation (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear modulus (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicoborate glasses (1)
- Silicon Carbide (1)
- Silicon release (1)
- Silver metallization paste (1)
- Simulation (1)
- Simulation workflow (1)
- Single crystal Ni-Base superalloys (1)
- Single fiber pull-out test (1)
- Single-Crystal (1)
- Single-crystal (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Slip localization (1)
- Slow crack growth (1)
- Slurry (1)
- Slurry optimization (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica (1)
- Soda-lime-silica glass (1)
- Sodium ion batteries (1)
- Softening temperature (1)
- Soil (1)
- Sol-gel coating (1)
- Solar panels (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solubility (1)
- Space (1)
- Spar cap design (1)
- Specimen geometry (1)
- Spinodal decomposition (1)
- Split-vacancy defect complexes (1)
- Stable crack growth (1)
- Stainless steel (1)
- Standardisation (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Steels (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural steel (1)
- Subcritical crack growth (1)
- Sulfiding (1)
- Superalloy single crystals (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface crystallization (1)
- Surface elasticity (1)
- Surface energy (1)
- Surface modification (1)
- Surface nucleation (1)
- Surface roughness (1)
- Surface stress (1)
- Swept wavelength interferometry (1)
- Symmetric dwell periods (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synthesis (1)
- T1 precipitate (1)
- TIG-welding (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile strength (1)
- Tensile tests (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal desorption mass spectrometry (1)
- Thermo-mechanical loading (1)
- Thermobimetal (1)
- Thermoelectric oxide (1)
- Thermoelectric oxides (1)
- Thermoelectrics (1)
- Thermomechanical fatigue (1)
- Thermoplastic (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thickening (1)
- Thin films (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Titanium (1)
- Titanium oxide (1)
- Topography (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon-polymerization (1)
- UV-irradiation (1)
- Ultrasonic assited machining (1)
- Ultrasound (1)
- Unidirectional composites (1)
- Upconversion (1)
- Upconverting nanoparticles (1)
- Utilization, and storage (CCUS) technology (1)
- Vickers hardness (1)
- Viscoelastic model (1)
- Viscoplasticity (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Water-based (1)
- Weibull distribution (1)
- Welding (1)
- Wet chemical etching (1)
- Whole-chain CCS scenario (1)
- Work of adhesion (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRD (1)
- Young's modulus (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- arbidic austempered ductile iron (1)
- battery aging mechanism (1)
- current collector corrosion (1)
- depth profiles (1)
- electron microscopy (1)
- high pressure (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- microstructural changes (1)
- negative crystal growth (1)
- phosphate glasses (1)
- water speciation (1)
- µ-gravity (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (355)
- 5.1 Mikrostruktur Design und Degradation (131)
- 5.2 Metallische Hochtemperaturwerkstoffe (65)
- 5.4 Multimateriale Fertigungsprozesse (61)
- 5.6 Glas (45)
- 5.5 Materialmodellierung (42)
- 5.0 Abteilungsleitung und andere (39)
- 5.3 Polymere Verbundwerkstoffe (36)
- 9 Komponentensicherheit (36)
- 8 Zerstörungsfreie Prüfung (35)
Paper des Monats
- ja (11)
High energy X-ray synchrotron diffraction is used to investigate the elastic anisotropy of the nickel-based superalloy IN718 produced by laser powder bed fusion (PBF-LB). This material is characterized by a columnar grain morphology with some crystallographic texture. The material is subjected to elastic loading to determine the diffraction elastic constants (DECs). Furthermore, the single-crystal elastic constants (SCEC) are refined from these experiments using different micromechanical models. The results show that each micromechanical model predicts a specific set of SCEC that well describes the elastic anisotropy of PBF-LB/IN718.
The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[111]-type textures along their loading direction. In addition to changes in the Young’s moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[111]-type texture. However, the relative behavior of the specimens possessing an [001]/[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed.
Although layer-based additive manufacturing methods such as laser powder bed fusion (PBF-LB) offer an immense geometrical freedom in design, they are typically subject to a build-up of internal stress (i.e. thermal stress) during manufacturing. As a consequence, significant residual stress (RS) is retained in the final part as a footprint of these internal stresses. Furthermore, localized melting and solidification inherently induce columnar-type grain growth accompanied by crystallographic texture. Although diffraction-based methods are commonly used to determine the RS distribution in PBF-LB parts, such features pose metrological challenges in their application. In theory, preferred grain orientation invalidates the hypothesis of isotropic material behavior underlying the common methods to determine RS. In this work, more refined methods are employed to determine RS in PBF-LB/M/IN718 prisms, based on crystallographic texture data. In fact, the employment of direction-dependent elastic constants (i.e. stress factors) for the calculation of RS results in insignificant differences from conventional approaches based on the hypothesis of isotropic mechanical properties. It can be concluded that this result is directly linked to the fact that the {311} lattice planes typically used for RS analysis in nickel-based alloys have high multiplicity and less strong texture intensities compared with other lattice planes. It is also found that the length of the laser scan vectors determines the surface RS distribution in prisms prior to their removal from the baseplate. On removal from the baseplate the surface RS considerably relaxes and/or redistributes; a combination of the geometry and the scanning strategy dictates the sub-surface RS distribution.
Polyether and -ester urethanes (PU) were exposed to artificial weathering at 40 °C and artificial UV radiation in a weathering chamber. In 3 parallel exposures, humidity was varied between dry, humid, and wet conditions. Material alteration was investigated by various analytical techniques like size exclusion chromatography
(SEC), liquid chromatography-infrared spectroscopy (LC-FTIR), thermal-desorption gas chromatography-mass spectrometry (TD-GC-MS), fluorescence mapping and dynamic mechanical analysis (DMA). Our results show that depending on the weathering conditions, different degradation effects can be observed. By means of SEC an initial strong decrease of the molar masses and a broadening of the mass distributions was found. After a material dependent time span this was followed by a plateau where molar mass changes were less significant. A minor moisture-dependent degradation effect was only found for polyester PU. Fluorescence measurements on two materials revealed an increase in the luminescence intensity upon weathering process reaching a saturation level after about 500 h. The changes in the optical properties observed after different exposure conditions and times were very similar. The TD-GC-MS data showed the fate of the stabilizers and antioxidant in the course of weathering. LC-FTIR measurements revealed a change in peak intensities and the ratio of urethane and carbonyl bands.
The round robin test investigated the reliability users can expect for AlSi10Mg additive manufactured specimens by laser powder bed fusion through examining powder quality, process parameter, microstructure defects, strength and fatigue. Besides for one outlier, expected static material properties could be found. Optical microstructure inspection was beneficial to determine true porosity and porosity types to explain the occurring scatter in properties. Fractographic analyses reveal that the fatigue crack propagation starts at the rough as-built surface for all specimens. Statistical analysis of the scatter in fatigue using statistical derived safety factors concludes that at a stress of 36.87 MPa the fatigue limit of 107 cycles could be reached for all specimen with a survival probability of 99.999 %.
Friction stir welding (FSW) of high-melting temperature alloys, such as steel and Inconel, requires tooling that can survive under the applied loads at the elevated temperatures. Tungsten-Rhenium (W-Re) alloys are a suitable candidate for this application; however, the costs typically associated with achieving the required densities and grain structure for the tooling are high due to the lengthy traditional processing required. Further costs are incurred in machining the starting bar stock to the final FSW tooling configuration. An alternate processing method is used in this study to shorten the fabrication time using direct current sintering which rapidly consolidates the starting powders at lower temperatures than used in traditional powder metallurgy. Although this process enables retention of the fine grain size, the sintering time is too short to form the desired single, solid phase. Therefore, the specimens were subjected to a post-consolidation heat treatment to fully solutionize the W matrix. Once the desired density and solid solution phase was verified in coupons, the final processing parameters were used to consolidate a net shape tool for FSW.
Inconel 718 is a precipitation strengthened, nickel-based super alloy of interest for the Additive Manufacturing (AM) of low volume, complex parts to reduce production time and cost compared to conventional subtractive processes. The AM process involves repeated rapid melting, solidification and reheating, which exposes the material to non-equilibrium conditions that affect elemental segregation and the subsequent formation of solidification phases, either beneficial or detrimental. These variations are difficult to characterize due to the small length scale within the micron sized melt pool. To understand how the non-equilibrium conditions affect the initial solidification phases and their critical temperatures, a multi-length scale, multi modal approach has been taken to evaluate various methods for identifying the initial phases formed in the as-built Inconel 718 produced by laser-powder bed fusion (L-PBF) additive manufacturing (AM). Using a range of characterization tools from the bulk differential thermal analysis (DTA) and x-ray diffraction (XRD) to spatially resolved images using a variety of electron microscopy tools, a better understanding is obtained of how these minor phases can be properly identified regarding the amount and size, morphology and distribution. Using the most promising characterization techniques for investigation of the as-built specimens, those techniques were used to evaluate the specimens after various heat treatments. During the sequence of heat treatments, the initial as-built dendritic structures recrystallized into well-defined grains whose size was dependent on the temperature. Although the resulting strength was similar in all heat treated specimens, the elongation increased as the grain size was refined due to differences in the precipitated phase distribution and morphology.
Fractography plays a critical role in failure analysis of engineering components and has a considerable importance for safety investigations. Usually, the interpretation of fracture surfaces is done by experts with the help of literature and experimental data, that requires a lot of experience. The use of deep learning (DL) with neural networks in failure analysis becomes more and more relevant with the rapidly developing possibilities. Especially, the modern network architectures can assist fractographers in determining various fracture features on SEM images of the fracture surfaces. The basis for the best possible evaluation is the understanding of the influence of the input data used for training deep neural networks (DNN). Therefore, this study discusses the influence of the selection of the input data used for the prediction quality of these networks in order to take this into account for future data acquisition. Specimens of various metallic materials were subjected to fatigue cracking experiment under laboratory conditions. The fractured surfaces were then imaged using various modes or detectors (such as SE, BSE and topography) in SEM, and those captured images were used to create a training data set. The relevance of the individual data for the quality of the prediction is determined by a specific combination of the different detector data. For the training, the well-established architecture of a UNet-ResNet34 with a fixed set of hyperparameters is used. It has been found in this present study that the combination of all input data significantly increases the prediction accuracy, whereby even the combination of SE and BSE data provides considerable advantages over the exclusive use of SE images.
In failure analysis, micro-fractographic analysis of fracture surfaces is usually performed based on practical knowledge which is gained from available studies, own comparative tests, from the literature, as well as online databases. Based on comparisons with already existing images, fracture mechanisms are determined qualitatively. These images are mostly two-dimensional and obtained by light optical and scanning electron imaging techniques. So far, quantitative assessments have been limited to macrocopically determined percentages of fracture types or to the manual measurement of fatigue striations, for example. Recently, more and more approaches relying on computer algorithms have been taken, with algorithms capable of finding and classifying differently structured fracture characteristics. For the Industrial Collective Research (Industrielle Gemeinschaftsforschung, IGF) project “iFrakto” presented in this paper, electron-optical images are obtained, from which topographic information is calculated. This topographic information is analyzed together with the conventional 2D images. Analytical algorithms and deep learning are used to analyze and evaluate fracture characteristics and are linked to information from a fractography database. The most important aim is to provide software aiding in the application of fractography for failure analysis. This paper will present some first results of the project.
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
A phenomenological criterion for an optical assessment of PE-HD fracture surfaces obtained from FNCT
(2021)
The full-notch creep test (FNCT) is a common test method to evaluate the environmental stress cracking (ESC) behavior of high-density polyethylene (PE-HD), e.g. for container materials. The test procedure as specified in ISO 16770 provides a comparative measure of the resistance against ESC using the time to failure of PE-HD specimens under constant mechanical load in a well-defined liquid test environment. Since the craze-crack damage mechanism underlying the ESC phenomenon is associated with brittle failure, the occurrence of a predominantly brittle fracture surface is a prerequisite to consider an FNCT measurement as representative for ESC, i.e. a time to failure dominated by craze-crack propagation.
The craze-crack propagation continuously reduces the effective residual cross-sectional area of the specimen during the test, which results in a corresponding increase of the effective mechanical stress. Thus, a transition to ductile shear deformation is inevitable at later stages of the test, leading usually to a pronounced central ligament.
Therefore, an optical evaluation of FNCT fracture surfaces concerning their brittleness is essential. An enhanced imaging analysis of FNCT fracture surfaces enables a detailed assessment of craze-crack Propagation during ESC. In this study, laser scanning microscopy (LSM) was employed to evaluate whether FNCT fracture surfaces are representative with respect to craze-crack propagation and ESC. Based on LSM height data, a phenomenological criterion is proposed to assess the validity of distinct FNCT measurements. This criterion is
supposed to facilitate a quick evaluation of FNCT results in practical routine testing. Its applicability is verified on a sample basis for seven different commercial PE-HD container materials.
Different imaging techniques were employed to monitor Full Notch Creep Test (FNCT) experiments addressing environmental stress cracking in more detail. The FNCT is a well-established test method to assess slow crack growth and environmental stress cracking of polymer materials, especially polyethylene. The standard test procedure, as specified in ISO 16770, provides a simple comparative measure of the resistance to crack growth of a certain material based on the overall time to failure when loaded with a well-defined mechanical stress and immersed in a liquid medium promoting crack propagation.
Destructive techniques which require a direct view on the free fracture surface, such as light microscopy and laser scanning microscopy, are compared to non-destructive techniques, i.e. scanning acoustic microscopy and xray micro computed tomography. All methods allow the determination of an effective crack length. Based on a series of FNCT specimens progressively damaged for varied Durations under standard test conditions, the estimation of crack propagation rates is also enabled. Despite systematic deviations related to the respective Imaging techniques, this nevertheless provides a valuable tool for the detailed evaluation of the FNCT and its further development.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
The knowledge of the temperature-induced changes of the superconductor volume and of the thermomechanical behavior of the different coil and tooling materials is required for predicting the coil geometry and the stress distribution in the coil after the Nb3Sn reaction heat treatment. In this paper, we have measured the Young’s and shear moduli of the HL-LHC 11 T Nb3Sn dipole magnet coil and reaction tool constituents during in situ heat cycles with the dynamic resonance method. The thermal expansion behaviors of the coil components and of a free standing Nb3Sn wire were compared based on dilation experiments.
Accelerator magnets that can reach magnetic fields well beyond the Nb-Ti performance limits are presently being built and developed, using Nb3Sn superconductors. This technology requires reaction heat treatment (RHT) of the magnet coils, during which Nb3Sn is formed from its ductile precursor materials (a “wind and react” approach). The Nb3Sn microstructure and microchemistry are strongly influenced by the conductor fabrication route, and by the Phase changes during RHT. By combining in situ differential scanning calorimetry, high Energy synchrotron x-ray diffraction, and micro-tomography experiments, we have acquired a unique data set that describes in great detail the phase and microstructure changes that take place during the processing of restacked rod process (RRP), powder-in-tube (PIT), and internal tin (IT) Nb3Sn wires. At temperatures below 450 ° the phase evolutions in the three wire types are similar, with respectively solid state interdiffusion of Cu and Sn, Cu6Sn5 formation, and Cu6Sn5 peritectic transformation. Distinct differences in phase evolutions in the wires are found when temperatures exceed 450 °C. The volume changes of the conductor during RHT are a difficulty in the production of Nb3Sn accelerator magnets. We compare the wire diameter changes measured in situ by dilatometry with the phase and void volume evolution of the three types of Nb3Sn wire. Unlike the Nb3Sn wire length changes, the wire diameter evolution is characteristic for each Nb3Sn wire type. The strongest volume increase, of about 5%, is observed in the RRP wire, where the main diameter increase occurs above 600 °C upon Nb3Sn formation.
Mixed ionic electronic conducting ceramics Nd6-yWO12-d (d is the Oxygen deficiency) provide excellent stability in harsh environments containing strongly reactive gases such as CO2, CO, H2, H2O or H2S. Due to this chemical stability, they are promising and cost-efficient candidate materials for gas separation, catalytic membrane reactors and protonic ceramic fuel cell technologies. As in La6-yWO12-d, the ionic/electronic transport mechanism in Nd6-yWO12-d is expected to be largely controlled by the crystal structure, the conclusive determination of which is still lacking. This work presents a crystallographic study of Nd5.8WO12-d and molybdenum-substituted Nd5.7W0.75Mo0.25O12-d prepared by the citrate complexation route. High-resolution synchrotron and neutron powder diffraction data were used in combined Rietveld refinements to unravel the crystal structure of Nd5.8WO12-d and Nd5.7W0.75Mo0.25O12-d. Both investigated samples crystallize in a defect fluorite crystal structure with space group Fm3m and doubled unit-cell parameter due to cation ordering. Mo replacesWat bothWyckoff sites 4a and 48h and is evenly distributed, in contrast with La6-yWO12-d. X-ray absorption spectroscopy as a function of partial pressure pO2 in the near-edge regions excludes oxidation state changes of Nd (Nd3+) and W(W6+) in reducing conditions: the enhanced hydrogen permeation, i.e. ambipolar conduction, observed in Mo-substituted Nd6-yWO12-d is therefore explained by the higher Mo reducibility and the creation of additional – disordered – oxygen vacancies.
Controlled oriented crystallization of glass surfaces is desired for high precision applications, since the uppermost crystal layer significantly influences the properties of the material. In contrast to previous studies, the data presented here deal with separated crystals growing at defect-free surfaces in four atmospheres with different degrees of humidity (ambient/dry air, argon and vacuum). A glass with the composition 2 BaO–TiO2–2.75 SiO2 was heat-treated at 825 °C until fresnoite (Ba2TiSi2O8) grew to a significant size. The crystal growth rate is found to increase with increasing humidity. The morphology of the crystals changes from highly distorted dendrites in the driest atmosphere (vacuum) to circular/spear-head-shaped crystals in the wettest atmosphere (ambient air), which we attribute to a decrease in viscosity of the glass surface due to water uptake. The least distorted crystals appear in the form of depressions of up to 6 µm. This has an influence on the observed crystal orientation, as measured by electron backscatter diffraction (EBSD). The pulled-in crystals change the orientation during growth relative to the flat glass surface due to an enrichment in SiO2 at the crystal fronts. This confirms that the orientation of crystals is not fixed following nucleation.
Assessing the structural integrity of carbon-fibre sandwich panels in fire: Bench-scale approach
(2019)
The fire resistance of lightweight sandwich panels (SW) with carbon fibre/epoxy skins and a poly(methacryl imide) (PMI) foam core is investigated in compression under direct application of a severe flame (heat flux=200 kW m−2). A bench-scale test procedure was used, with the sample held vertically. The epoxy decomposition temperature was quickly exceeded, with rapid flash-over and progressive core softening and decomposition.
There is a change in failure mode depending on whether the load is greater or less than 50% of the unexposed failure load, or in other words if one or two skins carry the load. At high loads, failure involved both skins with a single clear linear separation across each face. There is an inflection in the failure time relationship in the ∼50% load region, corresponding to the time taken for heat to be transmitted to the rear face, along with a change in the rear skin failure mode from separation to the formation of a plastic hinge. The integrity of the carbon front face, even with the resin burnt out, and the low thermal diffusivity of the core, both play key roles in prolonging rear face integrity, something to be borne in mind for future panel design. Intumescent coatings prolong the period before failure occurs. The ratio of times to failure with and without protection is proposed as a measure of their effectiveness. Apart from insulation properties, their adhesion and stability under severe fire impact play a key role.
The present work addresses powder bed binder jetting additive manufacturing by selective magnesium phosphate cement activation. Despite the potential of this technology to aid the digitalization of the construction industry, the effect of processing parameters on the mechanical performance of printed materials has not yet been studied to generate a guideline for the further development of the technology. Statistical methodologies were used to screen the effect of four printing process parameters (printing speed, layer thickness, raster angle, and build direction on flexural and compressive strength). As the exploited technology works with constant fluid pressure, the physical interpretation of the effect of each factor can be considered taking into account the interactions between the binder materials in the powder bed. Analysis of variance (ANOVA) indicated that printing speed and layer thickness significantly affect mechanical performances. Furthermore, the layout of samples for the printing process is preferable to be parallel the printhead movement. An anisotropic behavior was observed, and the samples subjected to compressive forces parallel to the layer plane possessed lower strength values. This effect can be interpreted as a result of a weak area of low density in between layers, leading to a pronounced delamination under compression. Even though the strength of the printed material is not suitable for a structural concrete, it can be marginally improved by design of experiment and optimized for non-structural applications, such as for porous artificial stone. Design of experiment coupled with ANOVA methods can be used in the future to support the development of novel material mixtures, thus expanding the fields of application of this novel additive manufacturing technology.
To set up recommendations on how to define “reasonable minimum composition thresholds” for CO2 streams to access CO2 pipeline networks, we investigated potential impacts of CO2 streams with different and temporally variable compositions and mass flow rates along the CCS chain. All investigations were based on a generic “CCS cluster scenario” in which CO2 streams captured from a spatial cluster of eleven emitters (seven fossil-fired power plants, two cement plants, one refinery and one steel mill) are collected in a regional pipeline network. The resulting CO2 stream (19.78 Mio t impure CO2 per year) is transported in a trunk line (onshore and offshore) and injected into five generic replicate storage structures (Buntsandstein saline aquifers) offshore. Experimental investigations and modeling of selected impacts revealed beneficial as well as adverse impacts of different impurities and their combinations. Overall, no fundamental technical obstacles for transporting, injecting and storing CO2 streams of the considered variable compositions and mass flow rates were observed. We recommend to define minimum composition thresholds for each specific CCS project through limiting
i) the overall CO2 content,
ii) maximum contents of relevant impurities or elements,
iii) acceptable variability of concentrations of critical impurities, and defining impurity combinations to be avoided.