5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (102)
Sprache
- Englisch (74)
- Deutsch (26)
- Mehrsprachig (2)
Referierte Publikation
- nein (102) (entfernen)
Schlagworte
- Additive Manufacturing (22)
- Ceramics (12)
- Additive manufacturing (11)
- Ceramic (9)
- Thermoelectrics (8)
- Particle size (7)
- 3D printing (5)
- Microgravity (5)
- Powder (5)
- Slurry (5)
- VSSA (5)
- In-space manufacturing (4)
- Layerwise slurry deposition (4)
- Nano (4)
- Nano powder (4)
- Alumina (3)
- Ceramic spring (3)
- Dielectric strength (3)
- Gassensorik (3)
- H2Safety@BAM (3)
- Keramik (3)
- Zerstörungsfreie Prüfung (3)
- μ-gravity (3)
- Additive Fertigung (2)
- Advanced ceramics (2)
- Analytische Zentrifuge (2)
- CLS (2)
- Calciumcobaltit (2)
- Calciummanganat (2)
- Dielectric breakdown (2)
- Faseroptische Sensorik (2)
- Geführte Ultraschallwellen (2)
- Glass-ceramics (2)
- Hard machining (2)
- Laser beam melting (2)
- Layerwise (2)
- Leckdetektion (2)
- Lunar regolith simulant (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Multilayer (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- Nano particle (2)
- Nano screening (2)
- Nano-powder (2)
- Nanomaterial (2)
- Nanoparticles (2)
- Nanopulver (2)
- OECD TG 124 (2)
- Partikelgrößenverteilung (2)
- Process monitoring (2)
- Reaction sintering (2)
- SensRef (2)
- Silicon Carbide (2)
- Sinter additive (2)
- Sintering additives (2)
- Spray drying (2)
- Spring constant (2)
- Structural Health Monitoring (SHM) (2)
- Texture (2)
- Thermoelectric (2)
- Ultrasound (2)
- Zero-g (2)
- µ-gravity (2)
- 3D Druck (1)
- 3D materialography (1)
- 3D-printing (1)
- Acids (1)
- Advanced manufacturing (1)
- Aerospace (1)
- Agglomerates (1)
- Atmospheric plasma spraying (1)
- BET (1)
- Biaxial strength (1)
- Binder jetting (1)
- Bioactive Glass (1)
- Bioceramics (1)
- Breakdown strength (1)
- Bundesoberbehörden (1)
- Calcination (1)
- Calcium cobaltite (1)
- Calcium manganate (1)
- Ceramic multilayer (1)
- Ceramic springs (1)
- Certified Referencematerial (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Characterization (1)
- Co-firing (1)
- Composites (1)
- Cooling simulations (1)
- Corrosion (1)
- Crystallization (1)
- Cubical Iron Oxide (1)
- DLS (1)
- Deformation behavior (1)
- Density (1)
- Dental (1)
- Destabilization (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Dispersion process (1)
- Durchschlagfestigkeit (1)
- EAC-1A (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electron Microscopy (1)
- Electron microscopy (1)
- Energy harvesting (1)
- Etching (1)
- Failure test (1)
- Faseroptik (1)
- Federkonstante (1)
- Feldspar (1)
- Fem (1)
- Fertigungstechnologie (1)
- Festigkeit (1)
- Fine Powder (1)
- Flowability (1)
- Foliengießen (1)
- Force-distance diagram (1)
- Freeze Drying (1)
- Geopolymers (1)
- Geothermal (1)
- Granules (1)
- Granulometrie (1)
- Grünfolieneigenschaften (1)
- Hartbearbeitung (1)
- Heat treatment (1)
- Hochspannungsprüfung (1)
- Hot Press (1)
- Hot pressing (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- ISRU (1)
- Implants (1)
- Infrastructure (1)
- Iron oxide nanoparticles (1)
- Kalzinierung (1)
- Keramikfeder (1)
- Keramische Folien (1)
- LSD-print (1)
- LTCC (1)
- Laser (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laserbearbeitung (1)
- Layer depostion (1)
- Layerwise Slurry Deposition (1)
- Li-ion battery (1)
- Light (1)
- Lunar habitat (1)
- Manufacturing (1)
- Martensitic steel (1)
- Mechanical and thermal testing (1)
- Metrologie (1)
- Microstructure (1)
- Mikrogravitation (1)
- Mixed Ca-K-Na phosphates (1)
- NDT (1)
- NTE (1)
- Na and K rhenanites (1)
- Nano material (1)
- Nanopartikel (1)
- Nanoplattform (1)
- OECD TG (1)
- Online quality control (1)
- Particle size determination (1)
- Partikelgröße (1)
- Patent (1)
- Paving (1)
- Phase diagram (1)
- Phase transformation (1)
- Phase transformations (1)
- Pole figures (1)
- Porcelain (1)
- Powder deposition (1)
- Preparation (1)
- Pressure assisted sintering (1)
- Pressure-assisted sintering (1)
- Protective coating (1)
- Pycnometry (1)
- Reference material (1)
- Resistance (1)
- Roughness (1)
- SLM (1)
- Schwerelosigkeit (1)
- Screen printing (1)
- Sensor (1)
- Sintering (1)
- Sintertemperatur (1)
- Size distribution (1)
- Small-Angle X-ray Scattering (1)
- Sol-gel coating (1)
- Solar sintering (1)
- Space exploration (1)
- Spannungs-Dehnungs-Verhalten (1)
- Spark plasma sintering (1)
- Specific surface (1)
- Spezifische Oberfläche (1)
- Spring constant (1)
- Stainless steel (1)
- Stanzen (1)
- Synchrotron CT (1)
- TEM (1)
- Texturation (1)
- Thermal stress (1)
- Thermoelectric generator (1)
- Thermoelectric oxide (1)
- Thermoelektrika (1)
- Thermoelektrischer Generator (1)
- Thermomechanische Eigenschaften (1)
- Tomography (1)
- Transparent ceramics (1)
- Two Photon Polymerization (1)
- Ultraschall (1)
- Water-based (1)
- Weibull distribution (1)
- Withstand voltage tests (1)
- X-ray imaging (1)
- Zyklische Belastung (1)
- alumina (1)
- ceramic (1)
- ceramics (1)
- dental (1)
- dispersion (1)
- particle size determination (1)
- sample preparation (1)
- volume resistivity (1)
- zertifizierte Referenzmaterialien (1)
- Überblick (1)
Organisationseinheit der BAM
- 5.4 Multimateriale Fertigungsprozesse (102) (entfernen)
Eingeladener Vortrag
- nein (102) (entfernen)
Destructive and non-destructive 3D-characterization of inner metal structures in ceramic packages
(2023)
Ceramic multilayer packages provide successful solutions for manifold
applications in telecommunication, microsystem, and sensor technology. In such packages, three-dimensional circuitry is generated by combination of structured and metallized ceramic layers by means of tape casting and multilayer technology. During development and for quality assurance in manufacturing, characterization of integrity, deformation, and positioning of the inner metal features is necessary.
Visualization with high resolution and material contrast is needed.
Robot-assisted 3D-materialography is a useful technique to characterize such multimaterial structures. In that, many sections of the specimen are polished and imaged automatically. A three-dimensional representation of the structure is created by digital combination of the image stack. A quasi non-destructive approach is to perform X-ray computer tomography (CT) with different beam energies. The energies are chosen to achieve a good imaging of either the metal features, or the ceramic matrix of the structure. The combination of the respective tomograms results in a high contrast representation of the entire structure. Both methods were tested to characterize Ag and Ag/Pd conductors in a ceramic multilayer package. The results were compared in terms of information content, effort, and applicability of the methods.
3D printing or additive manufacturing in space is of great value for long-term human spaceflight missions and space stations, conveniently offering access to a ‘virtual warehouse’ of tools and spare parts on the push of a button. The process only needs one type of feedstock such as powder or filament and only as much material as the final part requires, giving it a huge weight benefit over traditional subtractive methods.
While 3D printers are already operational on the ISS since 2014, the utilized processes are only capable of manufacturing relatively low strength parts from polymers not suitable for many tools or critical components. To gain access to high quality metal prints, a modified Laser Powder Bed Fusion (LPBF) process was developed to stabilize the critical powder bed in microgravity through a gas flow [2]. This setup was able to generate a (miniature) steel wrench during parabolic flights, but a reliable layer deposition has raised challenges due to the combination of gas flow parameters with microgravity conditions. Furthermore, the quality and density of the powder bed, which is critical for the process, cannot be examined afterward on the ground. This is due to hyper gravity phases during the flight that are influencing the properties of the powder bed.
In this paper, the challenges of the layer deposition are revised, and the subsequent evolution of the recoating system explained. Later, the challenges of an in-situ quality control, evaluation, and quantification of the properties of the powder bed are examined. As a solution, a high-resolution line-scanner is proposed and its implementation int the compact LPBF system demonstrated. Its ability to measure common defects such as ridges in the deposited layer is shown in experiments at normal gravity. As an illustration, Figure 1 shows an extreme case of the formation of ridges.
Due to their unique physico-chemical properties, nanoparticles are well established in research and industrial applications. A reliable characterization of their size, shape, and size distribution is not only mandatory to fully understand and exploit their potential and develop reproducible syntheses, but also to manage environmental and health risks related to their exposure and for regulatory requirements. To validate and standardize methods for the accurate and reliable particle size determination nanoscale reference materials (nanoRMs) are necessary. However, there is only a very small number of nanoRMs for particle size offered by key distributors such as the National Institute of Standards and Technology (NIST) and the Joint Research Centre (JRC) and, moreover, few provide certified values. In addition, these materials are currently restricted to polymers, silica, titanium dioxide, gold and silver, which have a spherical shape except for titania nanorods. To expand this list with other relevant nanomaterials of different shapes and elemental composition, that can be used for more than one sizing technique, we are currently building up a platform of novel nanoRMs relying on iron oxide nanoparticles of different shape, size and surface chemistry. Iron oxide was chosen as a core material because of its relevance for the material and life sciences.
Als elektrische Durchschlagfestigkeit bezeichnet man die elektrische Feldstärke, bei der es zur Entladung durch ein isolierendes Medium kommt. Im Falle von Festkörpern ist dies ein zerstörender Prozess. Bei der messtechnischen Bestimmung der Durchschlagfestigkeit haben neben den verwendeten Messgeräten auch die eingesetzten Elektroden, die Form des Prüfkörpers und das Isoliermedium, in dem die Prüfung stattfindet, einen signifikanten Einfluss auf die ermittelten Messwerte. Im Vortrag werden die Einflüsse erläutert und anhand von Messreihen aus der Literatur und der eigenen Forschung quantifiziert. Aufgrund der vorgestellten Effekte wird klar, dass es sich bei elektrischer Durchschlagfestigkeit nicht um absolute Materialkennwerte handelt, sondern vielmehr um systemabhängige Größen.
Der Beitrag beinhaltet Themen vom H2Safety@BAM-Kompetenzfeld Sensorik, Analytik und zertifizierte Referenzmaterialien (SensRef) mit Fokus auf Mess- und Prüfverfahren mit verschiedenen Sensortechnologien und Ultraschallwellen:
Metrologie zur Wasserstoffspeicherung - Euramet-Vorhaben "MefHySto",
Erkennung von freigesetztem Wasserstoff sowie die Bestimmung des Wasserstoff-Luftverhälntisses mit Gassensoren, zerstörungsfreie Fehlstellenerkennung mit integriertem Zustandsüberwachungssystem basierend auf geführten Ultraschallwellen zur Lebensdauerüberwachung von Composite-Behältern (Wasserstoffspeicher) sowie faseroptische Sensorik zur Schadenfrüherkennung von Wasserstoffspeichern aufgrund erkennbarer Dehnungsänderungen an Druckbehältern.
The Global Exploration Strategy of the International Space Exploration Coordination Group (ISECG) describes a timeframe of 2020 and beyond with the ultimate aim to establish a human presence on Mars towards the 2040ies. The next steps lie on the Moon with a focus on the coming 10 years. Early lunar surface missions will establish a capability in support of lunar science and prepare and test mission operations for subsequent human exploration of Mars and long-duration human activities on the Moon.
Given the extreme costs involved in the shipping of material from Earth, a prerequisite for future human exploration is the manufacturing of elements directly on the Moon’s surface. Unlike the equipment, which at the beginning will have to be brought from Earth, raw materials and energy could be available following the concept of In-Situ Resource Utilization. The ESA OSIP PAVING THE ROAD (PAVER) study investigates the use of a laser to sinter regolith into paving elements for use as roadways and launch pads thus mitigating dust issues for transport and exploration vehicles.
The ESA-funded study examines the potential of using a laser (12 kW CO2 laser with spot beam up to 100 mm) for layer sintering of lunar and martian regolith powders to manufacture larger 3D elements and provide know-how for the automatic manufacture of paving elements in the lunar environment. The project contributes to the first step toward the establishment of a lunar base and will lead to the construction of equipment capable of paving areas and manufacturing 3D structures.
PAVER project sets the starting point for an examination of the larger context of lunar exploration. Mission scenarios will look at different phases of lunar exploration: Robotic Lunar Exploration, Survivability, Sustainability, and Operational Phase. A proposed Technology Roadmap investigates the mission scenario and analyses how, and to which extent, laser melting/sintering will play a role in the various phases of exploration. The paper contextualizes laser sintering within selected mission scenarios and discusses the different kinds of infrastructure that can be produced at each phase of the mission. The outcome of the study includes the detailing of the TRL steps in the project and an outline of a timeline for the different elements. Covered aspects include terrain modelling such as operation pads, roadways, or towers, non-pressurized building structures to protect machinery, and habitat envelopes, to protect and shield humans against dust, micrometeoroids, and radiation.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. Powder bed fusion and binder jetting especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability. The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders. In this context, the “layerwise slurry deposition” (LSD) has been developed as a layer deposition method which enables the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder layer. This offers high flexibility in the ceramic feedstock used, especially concerning material and particle size. The LSD technology can be combined with binder jetting to develop the so-called “LSDprint” process for the additive manufacturing of ceramics. The LSDprint technology combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. In this presentation, the LSD process will be introduced and several examples of application ranging from silicate to high-performance ceramics will be shown. Recent developments towards the scale-up and industrialization of this process will be discussed, alongside future perspectives for the multi-material additive manufacturing.