5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (363) (entfernen)
Sprache
- Englisch (356)
- Mehrsprachig (5)
- Deutsch (1)
- Russisch (1)
Referierte Publikation
- ja (363) (entfernen)
Schlagworte
- Additive manufacturing (22)
- EBSD (16)
- Additive Manufacturing (14)
- Microstructure (14)
- Corrosion (12)
- Residual stress (12)
- Transmission electron microscopy (12)
- Creep (11)
- Glass (10)
- Crystallization (8)
- Mechanical properties (7)
- Sintering (7)
- Steel (7)
- Aging (6)
- Carbon steel (6)
- Fatigue (6)
- High entropy alloy (6)
- High temperature corrosion (6)
- SEM (6)
- 3D printing (5)
- Bioactive glass (5)
- Degradation (5)
- Electron microscopy (5)
- Laser powder bed fusion (5)
- Metallic glasses (5)
- Neutron diffraction (5)
- Ontology (5)
- Oxidation (5)
- Plasticity (5)
- Alumina (4)
- CALPHAD (4)
- Ceramic (4)
- Ceramics (4)
- EXAFS (4)
- Electron backscatter diffraction (4)
- Fracture (4)
- HIP (4)
- High entropy alloys (4)
- Impurities (4)
- Kikuchi patterns (4)
- Lattice parameters (4)
- Martensite (4)
- Metallic glass (4)
- Nanoindentation (4)
- Plastic deformation (4)
- Scanning electron microscopy (4)
- Vickers indentation (4)
- X-ray diffraction (4)
- Zirconia (4)
- 3D-Printing (3)
- AISI 316L (3)
- Calcination (3)
- Carbon fibres (3)
- Crack healing (3)
- Dislocation (3)
- Environmental stress cracking (ESC) (3)
- Finite element analysis (3)
- Fracture toughness (3)
- Full notch creep test (FNCT) (3)
- General Materials Science (3)
- Glass transition (3)
- Grain boundary (3)
- Inconel 718 (3)
- Interfacial strength (3)
- Iron (3)
- Laser Powder Bed Fusion (3)
- Laser scanning microscopy (LSM) (3)
- Molecular dynamics (3)
- NMR spectroscopy (3)
- Nanoparticles (3)
- Nickel-based superalloys (3)
- Pattern matching (3)
- Phase-field simulation (3)
- Raman spectroscopy (3)
- Reproducibility (3)
- Self-healing (3)
- Single crystal (3)
- Stress intensity factor (3)
- Stress relaxation (3)
- Superalloy (3)
- TEM (3)
- Thermal expansion (3)
- Ti-6Al-4V (3)
- Viscosity (3)
- X-ray refraction (3)
- 3D-printing (2)
- AGIL (2)
- AISI 304L (2)
- Alloy design (2)
- Aluminum alloys (2)
- Atom probe tomography (2)
- Bacteria (2)
- Binder jetting (2)
- Bioactivity (2)
- Bioceramics (2)
- Bone regeneration (2)
- Bulk metallic glasses (2)
- CCS (2)
- CCUS (2)
- Calcium cobaltite (2)
- Characterization (2)
- Compositionally complex alloys (2)
- Computed Tomography (2)
- Computed tomography (2)
- Condensate (2)
- Coulomb explosion (2)
- CrCoNi (2)
- Crack growth (2)
- Crack propagation (2)
- Crop protection products (2)
- Crystal orientation (2)
- Crystal plasticity (2)
- Debinding (2)
- Deep Learning (2)
- Defects (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Deuterium (2)
- Diffusion (2)
- Diopsid (2)
- Elastic constants (2)
- Environmental stress cracking (2)
- Foaming (2)
- Fractography (2)
- Fracture mechanics (2)
- GFRP (2)
- Geothermal (2)
- Glass ceramic (2)
- Glass-ceramic (2)
- Gold (2)
- Grain boundaries (2)
- Heat treatment (2)
- High-density polyethylene (2)
- High-entropy alloy (2)
- High-temperature corrosion (2)
- Hydrogen (2)
- IN718 (2)
- Infrared spectroscopy (2)
- Internal friction (2)
- Interphase (2)
- Kikuchi diffraction (2)
- Kikuchi pattern (2)
- LPBF (2)
- LTCC (2)
- Lattice distortion (2)
- Layerwise slurry deposition (2)
- Low cycle fatigue (2)
- Lunar regolith (2)
- Machine Learning (2)
- Mars (2)
- Martensitic transformation (2)
- Mechanical Engineering (2)
- Mechanics of Materials (2)
- Microhardness (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure and texture (2)
- Microstructure evolution (2)
- Mobility (2)
- Modeling (2)
- Native oxide (2)
- Neutron Diffraction (2)
- Nickel alloys (2)
- Nickel-base superalloys (2)
- Ontologies (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- P92 (2)
- Permeability (2)
- Phase transformations (2)
- Phase-field (2)
- Polyethylene (2)
- Polymer (2)
- Preceramic polymer (2)
- Precipitation (2)
- Pressure-assisted sintering (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Reaction-sintering (2)
- Relaxation (2)
- Residual Stress (2)
- S-Phase (2)
- SIMS (2)
- Sample preparation (2)
- Selective laser melting (2)
- Shape-memory alloys (2)
- Shear bands (2)
- Short-range order (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single-crystals (2)
- Slow crack growth (SCG) (2)
- Sorption (2)
- Spray drying (2)
- Stress corrosion cracking (2)
- Sulfidation (2)
- Sulphidation (2)
- Superalloys (2)
- Superconducting magnet (2)
- Surface treatments (2)
- Tempered martensite-ferritic steel (2)
- Tensile properties (2)
- Tensile testing (2)
- Texture (2)
- Thermodynamics (2)
- Thermoelectric properties (2)
- Thermography (2)
- ToF-SIMS (2)
- Toughness (2)
- Transmission electron microscopy (TEM) (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- 12%Cr steel (1)
- 316L (1)
- 316L stainless steel (1)
- 3D etching (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 9-12%Cr steel (1)
- Abrasion (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Advanced high strength steels (1)
- Ageing (1)
- Aggressive environments (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al2O3 (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alloy (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alumina coatings (1)
- Aluminium alloys (1)
- Aluminosilicate glasses (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Amorphization (1)
- Analytical scanning electron microscopy (1)
- Angle measurement (1)
- Approximant (1)
- Aquifer fluid (1)
- Artificial weathering (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic steel 316L (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated image analysis (1)
- BTEX (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Biaxial strength (1)
- Bimodal distribution (1)
- Binder Jetting (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio Ceramics (1)
- Bio active ceramic (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Biodiesel (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Biosensor (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Brinell hardness (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bruchflächen (1)
- Bubble formation (1)
- Burst (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CKAN (1)
- CO2 (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calculated intrinsic fracture toughness (1)
- Carbide phase NbC (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon capture (1)
- Carbon capture and storage (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon nanotubes (1)
- Casing (1)
- Cavitation (1)
- CdTe quantum dots (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement (1)
- Cement-based materials (1)
- Ceramic multilayer (1)
- Ceramic multilayers (1)
- Cerium oxide (1)
- Chalcogenides (1)
- Characterisation (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Chemometrics (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-firings (1)
- Coating (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Coherent x-ray scattering (1)
- Composite recycling (1)
- Compositionally complex alloy (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Cooling rate (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion costs (1)
- Corrosion fatigue (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- CrMnFeCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack evolution (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Crack tip opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB (1)
- DCB geometry (1)
- Damage (1)
- Data Interoperability (1)
- Data analysis (1)
- Data infrastructures (1)
- Data mapping (1)
- Data pipeline (1)
- Data processing (1)
- Datenbank (1)
- Debonding (1)
- Defect population (1)
- Defects engineering (1)
- Deformation (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Dental (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Destabilization (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Diesel (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Digitalizations (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Discrete element method (1)
- Dislocation avalanches (1)
- Disorientation (1)
- Distributed fiber optic sensing (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Dry preparation (1)
- Drywood termite (1)
- Ductile iron (1)
- Dwell periods (1)
- Dwell times (1)
- Dynamic recrystallization (1)
- EFTEM (1)
- EN AW-2618A (1)
- Early oxidation (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Elastic energy (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elasticity (1)
- Electric conductivity (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron beam-induced charging (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron energy (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Energy distribution (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmentally assisted cracking (1)
- Epitaxial films (1)
- Epoxy (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR principles (1)
- FAIR research data management (1)
- FIB Tomography (1)
- FSDC (1)
- Fabrication (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Fatigue Testing (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue performance (1)
- Fatigue striations (1)
- Fatigue testing (1)
- Fe-Mn steels (1)
- Femtosecond laser (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Filters (1)
- Finite element method (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- Flowability (1)
- Four-point bending test (1)
- Fourier series (1)
- Fractional diffusion (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fraktographie (1)
- Freeze casting (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (1)
- Full notch creep test (1)
- Fullerite (1)
- Fungi (1)
- GD-OES (1)
- GMR (1)
- GMR sensors (1)
- Gallium (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- General Computer Science (1)
- General Engineering (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming (1)
- Glass forming melts (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass powder (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Glassy solids (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary engineering (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granules (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- HEA (1)
- Hackmanite (1)
- Hardness (1)
- Hausner ratio (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High alloyed steel (1)
- High density polyethylene (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Homogenization (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen storage (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- IASCC (1)
- IN 718 (1)
- ISRU (1)
- Impact damage (1)
- Impact wear (1)
- In situ diffraction (1)
- In situ synthesis (1)
- In situ tensile test (1)
- In situ thermal-annealing experiment (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interfacial shear strength (1)
- Interlaboratory comparability (1)
- Intermetallic (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperable (1)
- Intrinsic stress (1)
- Invar (1)
- Ion beam erosion Sectioning (1)
- Ionic porosity (1)
- Iron meteorite (1)
- Irradiation (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kidney injury (1)
- Kikuchi bands (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- LIBS (1)
- LSD print (1)
- Laboratory X-ray diffraction (1)
- Laser (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser ablation in liquid (1)
- Laser beam melting (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser powder-based directed energy deposition (1)
- Lateral flow (1)
- Lattice distortions (1)
- Lattice misfit (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Laves phase (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Li-ion battery (1)
- Light curing (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Long-term storage (1)
- Lorenz transmission electron microscopy (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-cycle fatigue (1)
- Low-loading (1)
- MEA (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- MOUSE (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Manufacturing (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Mass transport (1)
- Master curve (1)
- Material degradation (1)
- Material failure (1)
- Material modeling (1)
- Materials Modelling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical deformation (1)
- Medium Entropy Alloys (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Melt pool boundary (1)
- Melting (1)
- Meta material (1)
- Metal Dusting (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metallic Glass (1)
- Metallic materials (1)
- Methodology (1)
- Micro-shrinkages (1)
- Microplastic stress (1)
- Microplasticity (1)
- Microplastics (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural evolution (1)
- Microstructure Design (1)
- Microstructure analysis (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Microwave-assisted synthesis (1)
- Milling (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Mixed Ca-K-Na phosphates (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Model (1)
- Moisture (1)
- Molten salt (1)
- Moon (1)
- Multiaxial deformation (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NGS (1)
- NMR (1)
- Na and K rhenanites (1)
- Nano-composite (1)
- Nano-powder (1)
- Nano-scratch test (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterials (1)
- Nanoparticle structure (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure quantification (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- NiMaGa (1)
- NiTi (1)
- Nickel-base alloy (1)
- Niobium alloying (1)
- Nitride (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Notch (1)
- Nucleation (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Optical and Magnetic Materials (1)
- Optical centrifugation (1)
- Optical criterion of brittleness (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxyfluoride (1)
- Oxygen evolution reaction (1)
- PBF-LB/M/316L (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Parametric modeling (1)
- Particle morphology (1)
- Particle size (1)
- Particle-bed binder jetting (1)
- Passive components and circuits (1)
- Permittivity reduction (1)
- Persistent luminescence (1)
- Phase Diagram (1)
- Phase diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase separation (1)
- Phase stability (1)
- Phase transformation (1)
- Phase-Field Simulations (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photochromism (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platinum-group-metals (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Porcelain (1)
- Pore (1)
- Pores (1)
- Porosification (1)
- Porosity (1)
- Porous materials (1)
- Portable sensor (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Power factor (1)
- Power law (1)
- Precipitate shape (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Principal Stress (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Pseudosymmetry (1)
- Pultruded fiber rods (1)
- Radon transform (1)
- Reaction Sintering (1)
- Real time growth control (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Recommendations (1)
- Recycling (1)
- Reference data (1)
- Refractory alloy (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Reliability (1)
- Residual strains (1)
- Residual stresses (1)
- Resistance spot welding (1)
- Resonance testing (1)
- Reusable data (1)
- Review (1)
- Roughness (1)
- Round Robin (1)
- S-phase (1)
- SDC (1)
- SEM micrography (1)
- SLM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Safety assessment (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Schadensanalyse (1)
- Schwingstreifen (1)
- Scratches (1)
- Segregation (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear modulus (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicoborate glasses (1)
- Silicon Carbide (1)
- Silicon release (1)
- Silver metallization paste (1)
- Simulation (1)
- Simulation workflow (1)
- Single crystal Ni-Base superalloys (1)
- Single fiber pull-out test (1)
- Single-Crystal (1)
- Single-crystal (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Slip localization (1)
- Slow crack growth (1)
- Slurry (1)
- Slurry optimization (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica (1)
- Soda-lime-silica glass (1)
- Sodium ion batteries (1)
- Softening temperature (1)
- Soil (1)
- Sol-gel coating (1)
- Solar panels (1)
- Solid oxide fuell cell (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solubility (1)
- Space (1)
- Spar cap design (1)
- Specimen geometry (1)
- Spinodal decomposition (1)
- Split-vacancy defect complexes (1)
- Stable crack growth (1)
- Stainless steel (1)
- Standardisation (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Steels (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural steel (1)
- Subcritical crack growth (1)
- Sulfiding (1)
- Superalloy single crystals (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface crystallization (1)
- Surface elasticity (1)
- Surface energy (1)
- Surface modification (1)
- Surface nucleation (1)
- Surface roughness (1)
- Surface stress (1)
- Swept wavelength interferometry (1)
- Symmetric dwell periods (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synthesis (1)
- T1 precipitate (1)
- TIG-welding (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile strength (1)
- Tensile tests (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal desorption mass spectrometry (1)
- Thermo-mechanical loading (1)
- Thermobimetal (1)
- Thermoelectric oxide (1)
- Thermoelectric oxides (1)
- Thermoelectrics (1)
- Thermomechanical fatigue (1)
- Thermoplastic (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thickening (1)
- Thin films (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Titanium (1)
- Titanium oxide (1)
- Topography (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon-polymerization (1)
- UV-irradiation (1)
- Ultrasonic assited machining (1)
- Ultrasound (1)
- Unidirectional composites (1)
- Upconversion (1)
- Upconverting nanoparticles (1)
- Utilization, and storage (CCUS) technology (1)
- Vickers hardness (1)
- Vickers identation (1)
- Viscoelastic model (1)
- Viscoplasticity (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Water-based (1)
- Weibull distribution (1)
- Welding (1)
- Wet chemical etching (1)
- Whole-chain CCS scenario (1)
- Work of adhesion (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XANES (1)
- XPCS (1)
- XRD (1)
- Young's modulus (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- aerosol deposition method (ADM) (1)
- arbidic austempered ductile iron (1)
- battery aging mechanism (1)
- calcium cobaltite (1)
- current collector corrosion (1)
- depth profiles (1)
- electron microscopy (1)
- high pressure (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- microstructural changes (1)
- negative crystal growth (1)
- phosphate glasses (1)
- thermoelectric oxide (1)
- thermoelectrics (1)
- water speciation (1)
- µ-gravity (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (363)
- 5.1 Mikrostruktur Design und Degradation (131)
- 5.2 Metallische Hochtemperaturwerkstoffe (65)
- 5.4 Multimateriale Fertigungsprozesse (63)
- 5.6 Glas (49)
- 5.5 Materialmodellierung (42)
- 5.0 Abteilungsleitung und andere (41)
- 9 Komponentensicherheit (37)
- 5.3 Polymere Verbundwerkstoffe (36)
- 8 Zerstörungsfreie Prüfung (36)
Paper des Monats
- ja (11)
Manufacturing and deformation behavior of alumina and zirconia helical springs at room temperature
(2023)
Ceramic helical springs with identical dimensions were produced by hard machining from alumina, alumina toughened zirconia (ATZ), and tetragonal zirconia polycrystals (TZP) stabilized with different oxides. According to the results of the spring constant determination under deformation rates of 3 mm/min, the deformation behavior of all ceramic springs obeys to Hook’s law. However, variation of the deformation rate, tests under constant load, and spring recovery behavior revealed differences in the deformation behavior of alumina, TZP, and ATZ springs. Alumina springs exhibited time-independent deformation in all tests. In contrast, anelastic deformation at room temperature was demonstrated in all springs containing TZP. This deformation is completely reversible over a period of several days. Anelastic behavior is particularly pronounced in Y-TZP springs, whereas Ce-TZP springs exhibit comparatively very low but still reliably detectable anelasticity. Oxygen vacancies in the TZP ceramic are considered the most likely explanation for the anelastic behavior of TZP springs at room temperature.
Brittle materials, such as oxide glasses, are usually very sensitive to flaws, giving rise to a macroscopic fracture strength that is much lower than that predicted by theory. The same applies to metallic glasses (MGs), with the important difference that these glasses can exhibit certain plastic strain prior to catas- trophic failure. Here we consider the strongest metallic alloy known, a ternary Co 55 Ta 10 B 35 MG. We show that this macroscopically brittle glass is flaw-insensitive at the micrometer scale. This discovery emerges when testing pre-cracked specimens with self-similar geometries, where the fracture stress does not de- crease with increasing pre-crack size. The fracture toughness of this ultra-strong glassy alloy is further shown to increase with increasing sample size. Both these findings deviate from our classical under- standing of fracture mechanics, and are attributed to a transition from toughness-controlled to strength- controlled fracture below a critical sample size.
Low cost, high-efficiency catalysts towards water splitting are urgently required to fulfil the increasing demand for energy. In this work, low-loading (<20 wt%) Ni-confined in layered metal oxide anode catalysts (birnessite and lepidocrocite titanate) have been synthesized by facile ion exchange methodology and subjected to systematic electrochemical studies. It was found that Ni-intercalated on K-rich birnessite (Ni-KMO) presents an onset overpotential (ηonset) as low as 100 mV and overpotential at 10 mA cm−2 (η10) of 206 mV in pH = 14 electrolyte. By combining electrochemical methods and X-ray absorption and emission spectroscopies (XAS and XES), we demonstrate Ni sites are the active sites for OER catalysis and that the Mn3+ sites facilitate Ni intercalation during the ion-exchange process, but display no observable contribution towards OER activity. The effect of the pH and the nature of the supporting electrolyte on the electrochemical performance was also evaluated.
The hydrogen tightness of high-pressure hydrogen storage is a Basic criterion for long-term storage. The H2 permeation coefficients of epoxy resin and a glass lacquer were determined to enable the geometric optimization of a glass capillary storage. It was found that the curing conditions have no significant influence on the H2 permeation coefficient of resin.
The H2 permeation coefficient of epoxy resin is only about three orders of Magnitude greater than that of borosilicate glass. This suggests that the initial pressure of 700 bar takes about 2.5 years to be halved in capillary array storage. Therefore, a high-pressure hydrogen storage tank based on glass capillaries is ideally suited for long-term storage in mobile applications.
Tunable microwave devices will play an important role in future wireless systems, in which high-frequency bands, e.g. millimeter waves, will become promising, due to its huge spectrum availability. At such frequency bands, liquid crystals (LCs) exhibit low microwave loss, which is excellent compared with the other tuning elements. In this paper, LC-based microwave components are fabricated by using low temperature co-fired ceramic technology, allowing the integration of the LC into microwave structures. The first component, the Amplitude tuner, controls the signal’s amplitude by using the interference concept, which exhibits a tunable attenuation range from 11 dB to 30 dB at 30 GHz. The second component is a 3-pole tunable bandpass filter, which is realized by using a substrate integrated waveguide topology, enabling a device with comparatively high-quality factors (Q-factors). The measurement results show Q-factors in the range of 68 to 100 for a frequency tuning of 29.4–30.1 GHz, i.e. a tuning range of 700 MHz, accompanied by an insertion loss 2 dB to 4 dB.
High-performance fibre-reinforced polymer composites are important construction materials based not only on the specific properties of the reinforcing fibres and the flexible polymer Matrix but also on the compatible properties of the composite interphase. First, oxygen-free (a-CSi:H) and oxygen-binding (a-CSiO:H) plasma nanocoatings of different mechanical and tribological properties were deposited on planar silicon dioxide substrates that closely mimic E-glass. The nanoscratch test was used to characterize the nanocoating adhesion expressed in terms of critical normal load and work of adhesion. Next, the same nanocoatings were deposited on E-glass fibres, which were used as reinforcements in the polyester composite to affect its interphase properties. The shear properties of the polymer composite were characterized by macro- and micromechanical tests, namely a short beam shear test to determine the short-beam strength and a single fibre push-out test to determine the interfacial shear strength. The results of the polymer composites showed a strong correlation between the short-beam strength and the interfacial shear strength, proving that both tests are sensitive to changes in fibre-matrix adhesion due to different surface modifications of glass fibres (GF).
Finally, a strong correlation between the shear properties of the GF/polyester composite and the adhesion of the plasma nanocoating expressed through the work of adhesion was demonstrated.
Thus, increasing the work of adhesion of plasma nanocoatings from 0.8 to 1.5 mJ·m−2 increased the short-beam strength from 23.1 to 45.2 MPa. The results confirmed that the work of adhesion is a more suitable parameter in characterising the level of nanocoating adhesion in comparison with the critical normal load.
Frass (fine powdery refuse or fragile perforated wood produced by the activity of boring insects) of larvae of the European house borer (EHB) and of drywood termites was tested as a natural and novel feedstock for 3D-printing of wood-based materials. Small particles produced by the drywood termite Incisitermes marginipennis and the EHB Hylotrupes bajulus during feeding in construction timber, were used. Frass is a powdery material of particularly consistent quality that is essentially biologically processed wood mixed with debris of wood and faeces. The filigree-like particles flow easily permitting the build-up of woodbased structures in a layer wise fashion using the Binder Jetting printing process. The Quality of powders produced by different insect species was compared along with the processing steps and properties of the printed parts. Drywood termite frass with a Hausner Ratio HR = 1.1 with ρBulk = 0.67 g/cm3 and ρTap = 0.74 g/cm3 was perfectly suited to deposition of uniformly packed layers in 3D printing. We suggest that a variety of naturally available feedstocks could be used in environmentally responsible approaches to scientific material sciences/additive manufacturing.
Rapid solidification leads to unique microstructural features, where a less studied topic is the formation of various crystalline defects, including high dislocation densities, as well as gradients and splitting of the crystalline orientation. As these defects critically affect the material’s mechanical properties and performance features, it is important to understand the defect formation mechanisms, and how they depend on the solidification conditions and alloying. To illuminate the formation mechanisms of the rapid solidification induced crystalline defects, we conduct a multiscale modelling analysis consisting of bond-order potential-based molecular dynamics (MD), phase field crystal-based amplitude expansion simulations, and sequentially coupled phase field–crystal plasticity simulations. The resulting dislocation densities are quantified and compared to past experiments. The atomistic approaches (MD, PFC) can be used to calibrate continuum level crystal plasticity models, and the framework adds mechanistic insights arising from the multiscale analysis.
This article is part of the theme issue ‘Transport phenomena in complex systems (part 2)’.
Carbidic Austempered Ductile Iron (CADI) microstructures containing eutectic carbides can be produced by the addition of carbide stabilizing elements, such as chromium. Carbides formed from the addition of Cr are eutectic of M3C type. The presence of such hard phases can enhance the abrasion wear resistance of ductile iron. A new CADI can be produced by the addition of Nb. Niobium carbide particles are formed in the beginning of solidification and remain stable once they are insoluble in solid iron matrix. The dry sand abrasive wear resistance of ductile irons alloyed with 1.0, 1.8, and 2.4 wt% Nb were tested in both “as-cast” and “heat treated” conditions using standard ASTM G65. Results were compared to abrasive wear data obtained on ductile iron alloyed with 1 wt% Cr, CADI (1 wt% Cr), and the basic composition of iron without carbide stabilizing elements. In the “ascast” condition, the addition of Nb did not lead to a reduction in wear, while CADI with Nb is a promising substitute for CADI with Cr addition, because both materials showed very similar values of abrasion resistance.
Micro-ploughing and micro-cutting mechanisms were observed on the worn surfaces of ductile irons. Abrasive wear resistance of these alloys was correlated with the volume fraction of carbides.
Static immersion tests of potential injection pipe steels 42CrMo4, X20Cr13, X46Cr13, X35CrMo4, and X5CrNiCuNb16-4 at T = 60°C and ambient pressure, as well as p = 100 bar were performed for 700–8000 h in a CO2-saturated synthetic aquifer environment similar to CCS sites in the Northern German Basin (NGB). Corrosion rates at 100 bar are generally lower than at ambient pressure. The main corrosion products are FeCO3 and FeOOH with surface and local corrosion phenomena directly related to the alloy composition and microstructure. The appropriate heat treatment enhances corrosion resistance. The lifetime reduction of X46Cr13, X5CrNiCuNb16-4, and duplex stainless steel X2CrNiMoN22-5-3 in a CCS environment is demonstrated in the in situ corrosion fatigue CF experiments (axial push-pull and rotation bending load, 60°C , brine: Stuttgart Aquifer and NGB, flowing CO2: 30 L/h, +/- applied potential). Insulating the test setup is necessary to gain reliable data. S-N plots, micrographic-, phase-, fractographic-, and surface analysis prove that the life expectancy of X2CrNiMoN22-5-3 in the axial cyclic load to failure is clearly related to the surface finish, applied stress amplitude, and stress mode. The horizontal grain attack within corrosion pit cavities, multiple fatigue cracks, and preferable deterioration of austenitic phase mainly cause fatigue failure. The CF life range increases significantly when a protective potential is applied.
Using the method of directional solidification, single crystals of experimental nickel-based superalloys with negative, zero, and positive γ/γ' misfits are obtained. The γ' solvus, solidus, and liquidus temperatures of the alloys are determined, and the microstructures of the alloys after directional solidification, heat treatment, and creep tests are investigated. Creep tests are performed at temperatures of 800 and 1000°C. It is found that single crystals of the alloy with a negative γ/γ' misfit have the highest creep resistance and lifetime (the crystal lattice period of the γ' phase is smaller than that of the γ matrix).
Modern dry pressing of ceramic powders using spray‐dried granulates cannot avoid the occurrence of defects related to persisting inter‐ and intra‐granulate interstitial voids. These constitute the parent defect size population limiting the application of polycrystalline ceramics in high‐stress conditions. The mitigation of such defects could widen the range of application in technical and biomedical engineering, reduce the safety range for design, and extend the lifetime of components. Herein, the Weibull size‐effect on strength in size‐partitioned Yttria‐stabilized zirconias (YSZ) feedstocks is used to explore the viability of changing the density distribution of granulate sizes as an effective strategy to obtain a denser particle packing that could reduce the size distribution of strength‐limiting pressing defects. In a direct assessment of critical defect size using multiscale strength testing with a dataset of ≈1300 values, the success of such an approach in increasing the strength reliability for small volume components is demonstrated, along with its ultimate failure in altering the defect size distribution in sintered YSZ ceramics across several length scales. Finally, it is shown that granule morphology (spherical or dimpled) fails to affect the defect density and size distribution in YSZ ceramics.
Temperature-induced, stress-induced martensitic phase transitions and martensite reorientation process in Ni rich (50.9 at.%) NiTi pseudoelastic NiTi wires with ultra-fine grained (UFG) microstructure were studied by electrical resistance measurements. Measurements of the electrical resistance as a function of temperature at different constant mechanical loads accompanied by complementary experiments with variable loads at constant temperature were performed. Results show that the transformation mechanisms in UFG microstructures exhibit a higher level of complexity when compared with those characterizing the behavior of other microstructures (e.g., recrystallized or larger grains size). It was found that a threshold stress level below 150 MPa delimits the transition from a homogeneous (low stress) to localized but reversible Lüders type transformation (high stress) when the transformations are induced under constant applied stress and that reorientation processes require stresses of 100 MPa in the present UFG wires. Even though the strain evolutions do not always show two distinct yielding events during cooling or heating, electrical resistance measurements proved that a two-step transformation involving R-phase and B19' martensite was always present in the extended range of temperatures and stresses investigated here.
Self-healing polymers have been developed to improve durability and reduce costs associated with maintenance during service. The addition of thermoplastics to thermosets to produce mendable polymers appears as a promising selfhealing technique. In this study, poly (ethylene-co-methacrylic acid) (EMAA) was added to epoxy resin and the effects of EMAA addition on epoxy properties were evaluated. Specimens with two different contents of thermoplastic and particles sizes were manufactured. A two-level full factorial experimental design was used to evaluate the effect of particle size and particle content on properties of epoxy modified with addition of EMAA. Tensile tests and dynamic mechanical analysis (DMA) were used and the evaluated responses were tensile strength, modulus of elasticity, and glass transition temperature (Tg). X-ray computed tomography (XCT) was used to investigate particle size and concentration after manufacturing. It was found that the particle concentration has greater effects on stress–strain behavior of epoxy while Tg was not significantly affected by neither of the analyzed entrance variables.
A round-robin study has been carried out to estimate the impact of the human element in small-angle scattering data analysis. Four corrected datasets were provided to participants ready for analysis. All datasets were measured on samples containing spherical scatterers, with two datasets in dilute dispersions and two from powders. Most of the 46 participants correctly identified the number of populations in the dilute dispersions, with half of the population mean entries within 1.5% and half of the population width entries within 40%. Due to the added complexity of the structure factor, far fewer people submitted answers on the powder datasets. For those that did, half of the entries for the means and widths were within 44 and 86%, respectively. This round-robin experiment highlights several causes for the discrepancies, for which solutions are proposed.
In this work, the thermoelectric material calcium cobaltite Ca3Co4O9 (CCO), a promising p-type conducting thermoelectric oxide with anisotropic properties, was processed by the powder aerosol deposition method (PAD) to form a dense ceramic CCO film with a thickness in the µm range. The prepared films were characterized regarding their microstructure and thermoelectric properties between room temperature and 900 °C. After heat treatment at 900 °C, the CCO PAD film in-plane shows excellent properties in terms of electrical conductivity (280 S/cm at 900 °C) and Seebeck coefficient (220 µV/K at 900 °C). The calculated power factor in-plane (ab) reaches with 1125 µW/(m K2) 40 % of the single crystal value, surpassing the known-properties of CCO bulk ceramics. Examination of the microstructure shows a strong fiber texture of the film as well as a strong coarsening of the grains during the first heat treatment up to 900 °C.
The increasing pollution of terrestrial and aquatic ecosystems with plastic debris leads to the accumulation of microscopic plastic particles of still unknown amount. To monitor the degree of contamination analytical methods are urgently needed, which help to quantify microplastics (MP). Currently, time-costly purified materials enriched on filters are investigated both by micro-infrared spectroscopy and/or micro-Raman. Although yielding precise results, these techniques are time consuming, and are restricted to the analysis of a small part of the sample in the order of few micrograms. To overcome these problems, here we tested a macroscopic dimensioned NIR process-spectroscopic method in combination with chemometrics. For calibration, artificial MP/soil mixtures containing defined ratios of polyethylene, polyethylene terephthalate, polypropylene, and polystyrene with diameters < 125 µm were prepared and measured by a process FT-NIR spectrometer equipped with a fiber optic reflection probe. The resulting spectra were processed by chemometric models including support vector machine regression (SVR), and partial least squares discriminant analysis (PLS-DA). Validation of models by MP mixtures, MP-free soils and real-world samples, e.g. and fermenter residue, suggest a reliable detection and a possible classification of MP at levels above 0.5 to 1.0 mass% depending on the polymer. The benefit of the combined NIRS chemometric approach lies in the rapid assessment whether soil contains MP, without any chemical pre-treatment. The method can be used with larger sample volumes and even allows for an online prediction and thus meets the demand of a high-throughput method.
The fundamental processes of nucleation and crystallization are widely observed in systems relevant to material synthesis and biomineralization; yet most often, their mechanism remains unclear. In this study, we unravel the discrete stages of nucleation and crystallization of Fe3(PO4)2·8H2O (vivianite). We experimentally monitored the formation and transformation from ions to solid products by employing correlated, time-resolved in situ and ex situ approaches. We show that vivianite crystallization occurs in distinct stages via a transient amorphous precursor phase. The metastable amorphous ferrous phosphate (AFEP) intermediate could be isolated and stabilized. We resolved the differences in bonding environments, structure, and symmetric changes of the Fe site during the transformation of AFEP to crystalline vivianite through synchrotron X-ray absorption spectroscopy at the Fe K-edge. This intermediate AFEP phase has a lower water content and less distorted local symmetry, compared to the crystalline end product vivianite. Our combined results indicate that a nonclassical, hydration-induced nucleation and transformation driven by the incorporation and rearrangement of water molecules and ions (Fe2+ and PO4 3−) within the AFEP is the dominating mechanism of vivianite formation at moderately high to low vivianite supersaturations (saturation index ≤ 10.19). We offer fundamental insights into the aqueous, amorphous-to-crystalline transformations in the Fe2+−PO4 system and highlight the different attributes of the AFEP, compared to its crystalline counterpart.
Biopolymers are very efficient for significant applications ranging from tissue engineering, biological devices to water purification. There is a tremendous potential value of cellulose because of ist being the most abundant biopolymer on earth, swellability, and functional groups to be modified. A novel, highly efficient route for the fabrication of mechanically stable and natural hydrogels is described in which cellulose and glycine are dissolved in an alkaline solution of NaOH and neutralized in an acidic solution. The dissolving temperature and the glycine amount are essential parameters for the self-assembly of cellulose chains and for Tuning the morphology and the aggregate structures of the resulting hydrogels. Glycine plays the role of a physical crosslinker based on the Information obtained from FTIR and Raman spectra. Among the prepared set of hydrogels, CL5Gly30 hydrogels have the highest capacity to absorb water. The prepared CL5Gly30 gels can absorb up to seven times their dry weight due to its porous 3-D network structure. CL5Gly10 hydrogel exhibits 80% deformation under 21 N force executed. The method developed in this article can contribute to the application of heavy metal adsorption in aqueous solutions for water purification and waste management.
Calcium alkali metal (potassium and sodium) double and triple phosphates have been synthesized in different ways. Was for the first time used reaction sintering to produce ceramics based on calcium alkali metal mixed phosphates and investigated the densification behavior of mixed phosphate-based multiphase materials during sintering by this method. Was presented the microstructure of polished surfaces of sintered samples differing in phase composition and determined the density of ceramics prepared using reaction mixtures differing in composition. The effect of reaction sintering on the porosity of the ceramics has been assessed. Using stereolithographic printing and reaction sintering, was produced macroporous mixed Calcium phosphate-based ceramic implants. Their compressive strength has been determined to be 0.78 ± 0.21 MPa for two-phase samples and 1.02 ± 0.13 MPa for three-phase samples.