5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (47) (entfernen)
Schlagworte
- CALPHAD (5)
- Creep (4)
- Finite element analysis (3)
- Fracture mechanics (3)
- HIP (3)
- Phase-field (3)
- Phase-field simulation (3)
- Characterization (2)
- Crack propagation (2)
- Crystal plasticity (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Diffusion (2)
- Dislocation (2)
- Environmental stress cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Full notch creep test (FNCT) (2)
- Grain boundary engineering (2)
- Laser scanning microscopy (LSM) (2)
- Low cycle fatigue (2)
- Mass transport (2)
- Microstrucrue Design (2)
- Microstructure (2)
- Microstructure Design (2)
- Nickel-base superalloys (2)
- Residual stress (2)
- Single-crystals (2)
- Steels (2)
- Superalloys (2)
- Thermodynamics (2)
- 9-12%Cr steel (1)
- Accelerated temporal integration (1)
- Additive manufactured Ni-base superalloys (1)
- Additive manufacturing (1)
- Ageing (1)
- Aging (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alloys' Safety (1)
- Atomistic Simulation (1)
- Burst (1)
- CALPHAD database analysis (1)
- Ceramic multilayers (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Co-firings (1)
- Contact mechanics (1)
- Crack growth (1)
- Crack tip opening displacement (1)
- Craze-crack mechanism (1)
- Cyclic softening (1)
- Defects engineering (1)
- Deformation mechanisms (1)
- Degradation (1)
- Density-based Model (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Differential scanning calorimetry (DSC) (1)
- Digitalization (1)
- Directional grain growth (1)
- EXAFS (1)
- Elastic constants (1)
- Elastic energy (1)
- Elasticity (1)
- Electron microscopy (1)
- End of life (1)
- Failure rate (1)
- Fatigue (1)
- Fe-Mn steels (1)
- Ferritic–martensitic steel (1)
- Fourier series (1)
- Fracture surfaces (1)
- Fullerite (1)
- Global stability criterion (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundaries (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Hertzian cracks (1)
- High Entropy Alloys (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- Hot isostatic pressing (HIP) (1)
- Incremental lifetime models (1)
- Interfacial anisotropy (1)
- Internal stresses (1)
- Isostatic hot pressing (HIP) (1)
- Laser beam melting (LBM) (1)
- Lattice distortions (1)
- Liquid Metal Embrittlement (1)
- Liquid-metal embrittlement (1)
- Long-term aging (1)
- Low strain (1)
- Machine learning (1)
- Material modeling (1)
- Materials Modelling (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Microstructural characterization (1)
- Misfitting precipitate (1)
- Model (1)
- Molecular Dynamics (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- Nanoparticles (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Optical criterion of brittleness (1)
- Ordering (1)
- Ostwald ripening (1)
- P92 (1)
- Parametric modeling (1)
- Phase Diagram (1)
- Phase field model (1)
- Phase stability (1)
- Phase-Field Simulations (1)
- Phase-field modelling (1)
- Pore (1)
- Porosity (1)
- Precipitate shape (1)
- Precipitation (1)
- Production scatter (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Relaxation fatigue (1)
- Resistance spot welding (1)
- S-phase (1)
- Safety assessment (1)
- Scanning electron microscopy (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Short-range order (1)
- Single crystal superalloys (1)
- Single-Crystal (1)
- Single-crystal (1)
- Slow crack growth (SCG) (1)
- Spinodal decomposition (1)
- Strain energy (1)
- Superalloy (1)
- Superlattice extrinsic stacking faults (1)
- Surface-induced Melting (1)
- Symmetric dwell periods (1)
- Thermomechanical fatigue (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Turbine disk (1)
- Vacancies (1)
- Viscoplasticity (1)
- X-ray computed tomography (CT) (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.5 Materialmodellierung (47) (entfernen)
Paper des Monats
- ja (3)
The elastic properties of the single-crystal nickel-base superalloy CMSX-4 used as a blade material in gas turbines were investigated by the sonic resonance method in the temperature interval between room temperature and 1300 °C. Elastic constants at such high temperatures are needed to model the mechanical behavior of blade material during manufacturing (hot isostatic pressing) as well as during technical accidents which may happen in service (overheating). High reliability of the results was achieved using specimens of different crystallographic orientations, exciting various vibration modes as well as precise measurement of the material density and thermal Expansion required for modeling the resonance frequencies by finite element method. Combining the results measured in this work and literature data the elastic constants of the gamma and gamma' phases were predicted.
This prediction was supported by measurement of the temperature dependence of the gamma'fraction.
All data obtained in this work are given in numerical or analytical forms and can be easily used for different scientific and engineering calculations.
The creep behavior of single crystals of the nickel-based superalloy CMSX-4 was investigated at 1288 °C, which is the temperature of the hot isostatic pressing treatment applied to this superalloy in the industry. It was found that at this super-solvus temperature, where no gammaPrime-strengthening occurs, the superalloy is very soft and rapidly deforms under stresses between 4 and 16 MPa. The creep resistance was found to be very anisotropic, e.g., the creep rate of [001] crystals was about 11 times higher than that of a [111] crystal. The specimens of different orientations also showed a very different necking behavior. The reduction of the cross-sectional area psi of [001] crystals reached nearly 100 pct, while for a [111] crystal psi = 62 pct. The EBSD analysis of deformed specimens showed that despite such a large local strain the [001] crystals did not recrystallize, while a less deformed [111] crystal totally recrystallized within the necking zone. The recrystallization degree was found to be correlated with deformation behavior as well as with dwell time at high temperature. From the analysis of the obtained results (creep anisotropy, stress dependence of the creep rate, traces of shear deformation, and TEM observations), it was concluded that the main strain contribution resulted from <01-1>{111} octahedral slip.
A γ-analogue of the superalloy CMSX-4 that does not contain the strengthening γ′ -phase and only consists of the γ-solid solution of nickel has been designed, solidified as single-crystals of different orientations, and tested under creep conditions in the temperature range between 1150 and 1288 °C. The tests have revealed a very high creep anisotropy of this alloy, as was previously found for CMSX-4 at supersolvus temperature of 1288 °C. This creep anisotropy could be explained by the dominance of 〈011〉{111} octahedral slip. Furthermore, the analysis of the creep data has yielded a high value of the creep activation energy, Qc≈442 kJ/mol, which correlates with the high activation energy of Re diffusion in Ni. This supports the hypothesis that dislocation motion in the γ-matrix of Re-containing superalloys is controlled by the diffusion of the Re atoms segregating at the dislocation core. The Norton stress exponent n is close to 5, which is a typical value for pure metals and their alloys. The absence of γ′ -reprecipitation after high-temperature creep tests facilitates microstructural investigations. It has been shown by EBSD that creep deformation results in an increasing misorientation of the existing low angle boundaries. In addition, according to TEM, new low angle boundaries appear due to reactions of the a/2 〈011〉 mobile dislocations and knitting of new networks.
Modelling of environmentally assisted material degradation in the crack phase-field framework
(2019)
The simulation of crack propagation was conducted with a diffusive crack model in a variational framework. Moreover, the physically sound introduction of mass transport and coupling mechanisms due to environmentally assisted effects could be realised in this framework. The objective consists of the application of the phase-field Approach towards the simulation of environmentally assisted material degradation with the advantage of a non-required predefined crack path and a mesh-independent non-local formulation that facilitates the damage evolution with respect to material softening. The sharp crack is regularised by the introduction of a phase-field order parameter leading to a diffusive crack formulation.
Besides the equations originating from the linear momentum balance an additional evolution equation for the crack phase-field is introduced. Furthermore, mass transport is simulated by a Diffusion equation. The description delivered by the variational phase-field framework is able to simulate crack propagation according to published numerical test cases.
Additionally, the calculation of stress intensity factors is possible as well as crack resistance curves that describe stable crack propagation.
With the introduction of a mass transport mechanism the entire problem is subjected to a time frame that dictates the time-dependent action of soluted species on mechanical properties. A numerical framework within the phase-field approach is presented with an embrittlement-based coupling mechanism. The underlying functionals are expressed in terms of the displacement, mass concentration and crack phase-field. Within the phase-field approach the modelling of sharp crack discontinuities is replaced by a diffusive crack model facilitating crack initiation and complex crack topologies without the requirement of a predefined crack path. The isotropic hardening of the elasto-plastic deformation model and the local fracture criterion are affected by the species concentration. This allows for embrittlement and leads to an accelerated crack propagation. An extended mass transport equation for hydrogen embrittlement, accounting for mechanical stresses and deformations, is implemented. For stabilisation purposes a staggered scheme is applied to solve the system of partial differential equations by a multi-field finite-element method. A thermodynamically consistent coupling relation that accommodates the required mechanisms is presented.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
Single-crystal components made of nickel base superalloys contain pores after casting and homogenization heat treatment. Hot isostatic pressing (HIP), which is carried above the γ' -solvus temperature of the alloy, is industrially applied to reduce porosity. A modeling of HIP based on continuously distributed dislocations is developed in a 2D setting. Glide and climb of straight-edge dislocations, as well as vacancy diffusion, are the deformation mechanisms taken into account.
Thereby, dislocation glide is controlled by dragging a cloud of large atoms, and climb is controlled by vacancy diffusion. Relying on previous investigations of the creep behavior at HIP temperatures, it is assumed that new dislocations are nucleated at low-angle boundaries (LAB) and move through subgrains until they either reach the opposite LABs or react with other dislocations and annihilate.
Vacancies are created at the pore surface and diffuse through the alloy until they are either consumed by climbing dislocations or disappear at the LABs. The field equations are solved by finite elements. It is shown that pore shrinking is mostly controlled by vacancy diffusion as the shear stresses at the LABs are too low to
nucleate a sufficient amount of dislocations.
Crack propagation under low cycle fatigue and thermomechanical fatigue is characterized by high plastic and creep strains that extend over large regions around the crack, so that concepts of linear-elastic fracture mechanics cannot be applied. In these cases, the cyclic crack tip opening displacement 𝛥CTOD is a promising loading parameter to quantify crack growth. In this work, suitable definitions and Finite Element techniques are investigated and compared for an accurate calculation of 𝛥CTOD under cyclic mechanical and/or thermal loading. A viscoplastic temperature dependent material model of Chaboche-type is used along with large strain settings, specified for the austenitic cast iron Ni-resist. Extensive two-dimensional analyses of Single Edge Notch Tension specimens revealed that collapsed special crack tip elements are superior compared with commonly used regular quadrilateral 8-node elements. At the same level of accuracy of 𝛥CTOD, they require an about ten times coarser mesh and show less sensitivity
w.r.t. element size for both stationary and propagating cracks. In order to simulate fatigue crack growth, an efficient, fully automated FE-technique is developed for an incremental crack propagation by successive remeshing, whereby the deformations and internal state variables are mapped from the old mesh onto the new one. Recommendations are made regarding important numerical control parameters like optimal size of crack tip elements, length of crack growth increment in relation to plastic zone size and 𝛥CTOD value.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
Liquid-metal embrittlement (LME) of galvanized (Zn-coated) advanced high-strength steels is a long-known problem in materials science. Here we reveal the initial microstructural processes underneath the Zn-coating that lead to LME-microcrack initiation in the steel substrate. We track the microstructural evolution during the first tens of milliseconds and find pronounced signatures of Fe-Zn intermetallic precipitation in both ferrite grain boundaries and at internal ferrite-oxide phase boundaries. In concert with novel CALPHAD-integrated density-based thermodynamic modelling, we demonstrate that Zn-rich intermetallic phase-nucleation can occur at markedly low processing temperatures due to a segregation transition. We show that a small Znenrichment caused by Zn bulk-diffusion during the initial temperature rise in a joining process is sufficient to induce the segregation transition and subsequent nucleation of Fe-Zn intermetallic grain-boundary phases, which the experiments link to crack initiation sites. These findings direct focus onto LME-controlling microstructural and thermodynamic phenomena at temperatures below the ductility trough and the austenite formation temperature.