5 Werkstofftechnik
Filtern
Dokumenttyp
Sprache
- Englisch (64) (entfernen)
Referierte Publikation
- ja (64) (entfernen)
Schlagworte
- Creep (7)
- Microstructure (6)
- Additive manufacturing (5)
- Residual stress (5)
- Aging (4)
- Fatigue (4)
- Ontology (4)
- Additive Manufacturing (3)
- Electron microscopy (3)
- HIP (3)
- Ti-6Al-4V (3)
- AGIL (2)
- AISI 316L (2)
- Aluminum alloys (2)
- Crystal plasticity (2)
- Damage (2)
- Densty-based Thermodynamics (2)
- Dislocation (2)
- Finite element analysis (2)
- Laser powder bed fusion (2)
- Microstrucrue Design (2)
- Nickel-base superalloys (2)
- Ostwald ripening (2)
- P92 (2)
- Phase-field (2)
- Phase-field simulation (2)
- Plastic deformation (2)
- Precipitation (2)
- Rapid solidification (2)
- Reproducibility (2)
- S-Phase (2)
- Single-crystals (2)
- Stress relaxation (2)
- Superalloys (2)
- Superconducting magnet (2)
- Tempered martensite-ferritic steel (2)
- Thermodynamics (2)
- 316L (1)
- 316L stainless steel (1)
- 3D-finite element modeling (1)
- 9-12%Cr steel (1)
- Accelerated temporal integration (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Alloy design (1)
- Alloy microstructure (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Atomistic simulations (1)
- Austenite-to-martensite phase transformation (1)
- Automated image analysis (1)
- Bitter technique (1)
- Brinell hardness (1)
- CALPHAD (1)
- Carbon steel (1)
- Characterisation (1)
- Characterization (1)
- Chemo-mechanical coupling (1)
- Coefficient of thermal expansion (1)
- Computed Tomography (1)
- Computed tomography (1)
- Concrete (1)
- Contact mechanics (1)
- Continnum damage model (1)
- Corrosion (1)
- Crack propagation (1)
- Craze-crack mechanism (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Crystalline defects (1)
- Cyclic softening (1)
- Data Interoperability (1)
- Data infrastructures (1)
- Data mapping (1)
- Defects (1)
- Defects engineering (1)
- Deformation (1)
- Deformation mechanisms (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffusion (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- EN AW-2618A (1)
- Elastic constants (1)
- Elastic energy (1)
- Elastic modulus (1)
- Elasticity (1)
- Electrical resistance (1)
- Electron backscatter diffraction (1)
- Environment (1)
- Environmental stress cracking (ESC) (1)
- Environmentally assisted cracking (1)
- Expanding cavity model (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR research data management (1)
- Fatigue damage (1)
- Fatigue performance (1)
- Ferritic–martensitic steel (1)
- Fourier series (1)
- Fracture mechanics (1)
- Full notch creep test (FNCT) (1)
- Fullerite (1)
- GMR (1)
- GMR sensors (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Glass forming (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary thermodynamics (1)
- Heat treatment (1)
- Hertzian cracks (1)
- High-Entropy Alloys (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature corrosion (1)
- IN 718 (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ diffraction (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser beam melting (LBM) (1)
- Laser powder-based directed energy deposition (1)
- Laser scanning microscopy (LSM) (1)
- Layering misalignment (1)
- Linked open data (1)
- Long-term aging (1)
- Low carbon steel (1)
- Low cycle fatigue (1)
- Low strain (1)
- Low-cycle fatigue (1)
- Machine learning (1)
- Magnetic domain distribution (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Martensitic transformation (1)
- Mass transport (1)
- Material modeling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Mechanical anisotropy (1)
- Metal Magnetic Memory (1)
- Metal magnetic memory (1)
- Microstructure evolution (1)
- Miniature specimens (1)
- Misfitting precipitate (1)
- Model (1)
- Molecular dynamics (1)
- Multiaxial deformation (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- Neutron diffraction (1)
- NiTi (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Non-destructive Materials (1)
- Notch (1)
- Number density (1)
- Ontologies (1)
- Ordering (1)
- Orowan Mechanism (1)
- PBF-LB/M/316L (1)
- Parametric modeling (1)
- Phase Diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase stability (1)
- Phase-field model (1)
- Polymer (1)
- Pore (1)
- Positron annihilation spectroscopy (1)
- Precipitate shape (1)
- Process development (1)
- Reference data (1)
- Reheating (1)
- Relaxation fatigue (1)
- Resonance testing (1)
- S-phase (1)
- Safety (1)
- Selective laser melting (SLM) (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear modulus (1)
- Shear testing (1)
- Simulation of concrete (1)
- Single-Crystal (1)
- Slow crack growth (SCG) (1)
- Spinodal decomposition (1)
- Standardisation (1)
- Strain difference (1)
- Strain energy (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural steel (1)
- Superalloy single crystals (1)
- Symmetric dwell periods (1)
- T1 precipitate (1)
- TIG-welding (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile properties (1)
- Tensile strength (1)
- Tensile testing (1)
- Tensile tests (1)
- Thermal Cycling (1)
- Thermal expansion (1)
- Thermomechanical fatigue (1)
- Thickening (1)
- Topography (1)
- Transmission electron microscopy (1)
- Transmission electron microscopy (TEM) (1)
- Under cyclic loading (1)
- Viscoplasticity (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Volume fraction (1)
- X-ray computed tomography (CT) (1)
- Young's modulus (1)
- Young`s modulus (1)
- Young´s modulus (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.2 Metallische Hochtemperaturwerkstoffe (64) (entfernen)
Paper des Monats
- ja (1)
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
An interlaboratory study, involving eigth international laboratories and coordinated by COMTES FHT (Czech Republic), was conducted to validate tensile measurements obtained using miniature specimens on additively manufactured (AM) components and artifacts. In addition to AM 316L stainless steel (316L SS), a wrought highstrength steel (34CrNiMo6V, equivalent to AISI 4340) was also used. Based on the results, a precision statement in accordance with ASTM E691 standard practice was developed, intended for inclusion in a proposed annex to the ASTM E8/E8M tension testing method. The primary outcomes of the study highlighted the agreement between yield and tensile strength measured from miniature and standard-sized tensile specimens. Furthermore, most tensile properties exhibited similar standard deviations, offering users insight into the efficacy of miniature specimen applications.
High‐temperature KCl‐induced corrosion of high Cr and Ni alloys investigated by in‐situ diffraction
(2024)
High‐temperature KCl‐induced corrosion in laboratory air was observed in situ utilizing X‐ray diffraction. High Cr‐containing model alloys (Fe‐13Cr, Fe‐18Cr‐12Ni, and Fe‐25Cr‐20Ni) were coated with KCl and exposed to dry air at 560°C. KCl‐free alloys were studied in the equivalent atmosphere as a reference. After exposure to KCl‐free environments, all alloys showed the formation of very thin oxide layers, indicating good corrosion resistance. In contrast, KCl‐bearing alloys showed distinct damage after exposure.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.
Knowledge representation in the Materials Science and Engineering (MSE) domain is a vast and multi-faceted challenge: Overlap, ambiguity, and inconsistency in terminology are common. Invariant (consistent) and variant (context-specific) knowledge are difficult to align cross-domain. Generic top-level semantic terminology often is too abstract, while MSE domain terminology often is too specific. In this paper, an approach how to maintain a comprehensive MSE-centric terminology composing a mid-level ontology–the Platform MaterialDigital Core Ontology (PMDco)–via MSE community-based curation procedures is presented. The illustrated findings show how the PMDco bridges semantic gaps between high-level, MSE-specific, and other science domain semantics. Additionally, it demonstrates how the PMDco lowers development and integration thresholds. Moreover, the research highlights how to fuel it with real-world data sources ranging from manually conducted experiments and simulations with continuously automated industrial applications.
Fatigue tests were performed on the forged aluminum alloy EN AW-2618A in the T61 state. Different stress ratios (R = -1, R = 0.1) were selected to study the influence of mean stress on fatigue life. Two overaged states (10 h/230 ◦C, 1000 h/230 ◦C) were also tested to investigate the influence of overaging on fatigue life. Transmission electron microscopy (TEM) was used to characterize the precipitates (S-phase), which are mainly responsible for the strength of the alloy. A fractographic analysis was also performed to determine the failure mode. Overaging reduces the fatigue life compared to the T61 state. The longer the aging time, the lower the fatigue resistance. The reason is the decrease in (yield) strength, which correlates with the radius of the S-phase: the precipitate radius increases by a factor of approximately two for the overaged states compared to the initial state. The analysis of the fracture surfaces showed crack initiation occurs predominantly on the outer surface and is
associated with the primary phases.
To accelerate the growth of Industry 4.0 technologies, the digitalization of mechanical testing laboratories as one of the main data-driven units of materials processing industries is introduced in this paper. The digital lab infrastructure consists of highly detailed and standard-compliant materials testing knowledge graphs for a wide range of mechanical testing processes, as well as some tools that enable the efficient ontology development and conversion of heterogeneous materials’ mechanical testing data to the machine-readable data of uniform and standardized structures. As a basis for designing such a digital lab, the mechanical testing ontology (MTO) was developed based on the ISO 23718 and ISO/IEC 21838-2 standards for the semantic representation of the mechanical testing experiments, quantities, artifacts, and report data. The trial digitalization of materials mechanical testing lab was successfully performed by utilizing the developed tools and knowledge graph of processes for converting the various experimental test data of heterogeneous structures, languages, and formats to standardized Resource Description Framework (RDF) data formats. The concepts of data storage and data sharing in data spaces were also introduced and SPARQL queries were utilized to evaluate how the introduced approach can result in the data retrieval and response to the competency questions. The proposed digital materials mechanical testing lab approach allows the industries to access lots of trustworthy and traceable mechanical testing data of other academic and industrial organizations, and subsequently organize various data-driven research for their faster and cheaper product development leading to a higher performance of products in engineering and ecological aspects.