5 Werkstofftechnik
Filtern
Erscheinungsjahr
- 2022 (51) (entfernen)
Dokumenttyp
- Zeitschriftenartikel (51) (entfernen)
Sprache
- Englisch (50)
- Mehrsprachig (1)
Referierte Publikation
- ja (51) (entfernen)
Schlagworte
- Microstructure (4)
- Transmission electron microscopy (4)
- Additive manufacturing (3)
- HIP (3)
- AGIL (2)
- Additive Manufacturing (2)
- Corrosion (2)
- Crop protection products (2)
- Dislocation (2)
- Environmental stress cracking (2)
- High entropy alloy (2)
- High-density polyethylene (2)
- Interfacial strength (2)
- Raman spectroscopy (2)
- Rapid solidification (2)
- Self-healing (2)
- Superalloy (2)
- Tensile properties (2)
- 12%Cr steel (1)
- 316L (1)
- Al-Cu binary alloy system (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alumina (1)
- Austenitic steel 316L (1)
- Batch reactions (1)
- Binder Jetting (1)
- Binder jetting (1)
- Bioactive Glass (1)
- Bioactivity (1)
- Biphasic calcium phosphate (1)
- Borate (1)
- Brass (1)
- CALPHAD database analysis (1)
- CO2 quality (1)
- Carbide phase NbC (1)
- Carbon fibres (1)
- Carbon nanotubes (1)
- Ceramics (1)
- Characterization (1)
- Chemically complex alloy (1)
- Compositionally complex alloys (1)
- Corrosion costs (1)
- Corrosion protection (1)
- Crack opening displacement (1)
- Crack propagation (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep (1)
- Creep behavior (1)
- Creep under thermal cycling (1)
- Crystal lattice period (1)
- Crystal plasticity (1)
- Crystalline defects (1)
- Crystallization (1)
- Cuttlefish (1)
- Cyclic steam oxidation (1)
- Data infrastructures (1)
- Data mapping (1)
- Debonding (1)
- Dielectric properties (1)
- Diffraction (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- EXAFS (1)
- Electron backscatter diffraction (1)
- Equilibrium relaxation (1)
- Explosive welding (1)
- FAIR (1)
- Faceting (1)
- Fatigue (1)
- Fe-Mn steels (1)
- Fiber/matrix bond (1)
- Finite element method (1)
- Foaming (1)
- Fracture (1)
- Fracture surface analysis (1)
- Fracture toughness (1)
- Full notch creep test (1)
- Glass (1)
- Glass fiber-epoxy composites (1)
- Glass forming melts (1)
- Glass manufacturing (1)
- Grain boundary engineering (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain structure (1)
- Hausner ratio (1)
- Heat treatment (1)
- Heat-resistant nickel alloys (1)
- High Entropy Alloy (1)
- High entropy alloys (1)
- High temperature nickel-based eutectic alloys (1)
- High temperatures (1)
- High-entropy alloys (1)
- High‐temperature corrosion (1)
- Impurities (1)
- In situ thermal-annealing experiment (1)
- In-situ composites (1)
- Inconel 718 (1)
- Intermittent microplasticity (1)
- Intrinsic stress (1)
- Invar (1)
- Iron (1)
- KCl (1)
- Keywords: Poly(ether ether ketone) (1)
- Knowledge graphs (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser powder bed fusion (1)
- Laser powder-based directed energy deposition (1)
- Laves phase (1)
- Layerwise slurry deposition (1)
- Linear elastic fracture mechanics (1)
- Liquid phase sintering (1)
- Machine learning (1)
- Material failure (1)
- Materials Testing (1)
- Materials informatics (1)
- Mechanical deformation (1)
- Medium Entropy Alloys (1)
- Melt pool boundary (1)
- Meta material (1)
- Metal additive manufacturing (1)
- Metallic glasses (1)
- Microplastic stress (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural characterization (1)
- Microstructural evolution (1)
- Microstructure evolution (1)
- Model (1)
- Molecular dynamics (1)
- Nanoelectromechanical systems (NEMS) (1)
- Native oxide (1)
- Nickel-base superalloys (1)
- Nickel-based superalloys (1)
- Ontologies (1)
- Ontology (1)
- Ordering (1)
- Oxide (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase stability (1)
- Phase-field (1)
- Phase-field model (1)
- Physical aging (1)
- Pipeline network (1)
- Plasma spray (1)
- Plastic deformation (1)
- Plasticity (1)
- Polymer-matrix composites (PMC) (1)
- Pore (1)
- Porosity (1)
- Powder processing (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Recommendations (1)
- Refractory superalloys (1)
- Reliability (1)
- Reproducibility (1)
- SEM (1)
- SIMS (1)
- SO2 (1)
- Scaffold geometry (1)
- Scale-dependent behavior (1)
- Segregation engineering (1)
- Shear (1)
- Short range order (1)
- Silicon carbide (1)
- Silicon nanowires (1)
- Silver metallization paste (1)
- Single crystal (1)
- Sintering (1)
- Sintering additive (1)
- Smart materials (1)
- Specimen geometry (1)
- Steel (1)
- Steel alloy (1)
- Strain energy (1)
- Stress intensity factor (1)
- Sulfiding (1)
- Superalloys (1)
- Surface treatments (1)
- Tensile testing (1)
- Thermobimetal (1)
- Ti-6Al-4V (1)
- Transparency (1)
- Tribology (1)
- Two-photon-polymerization (1)
- Ultrasonic assited machining (1)
- Vickers hardness (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Wetting (1)
- Whole-chain CCS scenario (1)
- X-ray diffraction analysis (1)
- XRD (1)
- Yttria stabilized zirconia (1)
- negative crystal growth (1)
- γ/γ' matrix (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (51)
- 5.1 Mikrostruktur Design und Degradation (24)
- 5.2 Metallische Hochtemperaturwerkstoffe (11)
- 5.0 Abteilungsleitung und andere (6)
- 5.3 Polymere Verbundwerkstoffe (6)
- 5.5 Materialmodellierung (6)
- 7 Bauwerkssicherheit (6)
- 5.4 Multimateriale Fertigungsprozesse (5)
- 9 Komponentensicherheit (5)
- 7.5 Technische Eigenschaften von Polymerwerkstoffen (3)
Paper des Monats
- ja (2)
The amount of data generated worldwide is constantly increasing. These data come from a wide variety of sources and systems, are processed differently, have a multitude of formats, and are stored in an untraceable and unstructured manner, predominantly in natural language in data silos. This problem can be equally applied to the heterogeneous research data from materials science and engineering. In this domain, ways and solutions are increasingly being generated to smartly link material data together with their contextual information in a uniform and well-structured manner on platforms, thus making them discoverable, retrievable, and reusable for research and industry. Ontologies play a key role in this context. They enable the sustainable representation of expert knowledge and the semantically structured filling of databases with computer-processable data triples.
In this perspective article, we present the project initiative Materials-open-Laboratory (Mat-o-Lab) that aims to provide a collaborative environment for domain experts to digitize their research results and processes and make them fit for data-driven materials research and development. The overarching challenge is to generate connection points to further link data from other domains to harness the promised potential of big materials data and harvest new knowledge.
Poly (ether ether ketone) (PEEK) has a high continuous service temperature, excellent mechanical properties, and good solvent and abrasion resistance, which can be further improved through the addition of carbon nanotubes (CNTs). CNT-PEEK nanocomposites are promising matrices for continuous carbon fibre composites; powder processing can mitigate the high melt viscosities in these systems. In this study, model single fibre (hierarchical) composites were produced by embedding sized and desized carbon fibres in nanocomposite CNTPEEK powders followed by single fibre pull-out tests to assess interfacial characteristics. Carbon fibre-PEEK interfacial shear strength is typically 40–45 MPa. Increasing CNT loadings increased fibre-matrix interfacial shear strength linearly up to ~70 MPa at 5.0 wt%, which was attributed to the CNT-based mechanical modification of the PEEK matrix. Apparent interfacial shear strength was inversely correlated with the embedded fibre length irrespective of carbon fibre sizing or CNT loading, indicating brittle fracture of the fibre-matrix interface.
Pulled out carbon fibres were still coated with the matrix, which indicated strong adhesion at the interface in all samples, likely related to a transcrystalline region. Adhesion was, however, negatively affected by the presence of epoxy sizings. Frictional shear strength was independent of embedded fibre length and CNT content for all samples.
In this paper, columnar cellular growth with kinetic effects including kinetic undercooling and solute trapping in rapid directional solidification of alloys was investigated by using a recent quantitative phase-field model for rapid solidification. Morphological transition and primary spacing selection with and without kinetic effects were numerically investigated. Numerical results show that doublon structure is an intermediate state in the primary spacing adjustment of cellular arrays. It was found that the inclusions of kinetic effects result in the increase of the solute in the solid phase and the solute enrichment in the interdendritic liquid channel. Moreover, predicted results indicate that the growth directions of the cellular arrays in rapid directional solidification with and without kinetic effects are independent of the Péclet number. Therefore, the kinetic effects play important roles in numerical simulations of the growth pattern selection and solute distribution during rapid solidification. Neglecting them will result in the inaccurately predicted results.
Characterization of Ti-6Al-4V fabricated by multilayer laser powder-based directed energy deposition
(2022)
Laser powder-based directed energy deposition (DED-L) is increasingly being used in additive manufacturing (AM). As AM technology, DED-L must consider specific challenges. It must achieve uniform volume growth over hundreds of layers and avoid heat buildup of the deposited material. Herein, Ti–6Al–4V is fabricated using an approach that addresses these challenges and is relevant in terms of transferability to DED–L applications in AM. The assessment of the obtained properties and the discussion of their relationship to the process conditions and resulting microstructure are presented. The quality of the manufacturing process is proven in terms of the reproducibility of properties between individual blanks and with respect to the building height. The characterization demonstrates that excellent mechanical properties are achieved at room temperature and at 400 °C.
Interpreting high-temperature corrosion induced by mixed-gas atmospheres is challenging due to the different contributions of oxidizing gases. Here, a comprehensive study on the combined oxidation/sulfidation using label molecules is presented. Fe-Cr model alloys with 2 wt% and 9 wt% Cr were isothermally exposed using a volumetric mixture of 0.5%S16O2/27%H218O and 0.5%S16O2/7%H218O at 650 ◦C for 5 h and then characterized by secondary ion mass spectroscopy (SIMS). Additionally, the reactions were followed in-situ utilizing energy dispersive X-ray diffraction. The study showed that both S16O2 and H218O contribute to the oxidation of the alloys but to different extents depending on the Cr-content.
A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate‐resilient energy systems and infrastructures brings with it a long‐term direction, so as a result the long‐term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
(2022)
This study presents a thorough characterization of the creep properties of austenitic stainless steel 316L produced by laser powder bed fusion (LPBF 316L) contributing to the sparse available data to date. Experimental results (mechanical tests, microscopy, X-ray computed tomography) concerning the creep deformation and damage mechanisms are presented and discussed. The tested LPBF material exhibits a low defect population, which allows for the isolation and improved understanding of the effect of other typical aspects of an LPBF microstructure on the creep behavior. As a benchmark to assess the material properties of the LPBF 316L, a conventionally manufactured variant of 316L was also tested. To characterize the creep properties, hot tensile tests and constant force creep tests at 600 °C and 650 °C are performed. The creep stress exponents of the LPBF material are smaller than that of the conventional variant. The primary and secondary creep stages and the times to rupture of the LPBF material are shorter than the hot rolled 316L. Overall the creep damage is more extensive in the LPBF material. The creep damage of the LPBF material is overall mainly intergranular. It is presumably caused and accelerated by both the appearance of precipitates at the grain boundaries and the unfavorable orientation of the grain boundaries. Neither the melt pool boundaries nor entrapped gas pores show a significant influence on the creep damage mechanism.
A nickel-based eutectic alloy with a γ/γ'-NbC structure was directionally solidified with a planar front. The specimens were tested for creep under sawtooth thermal cycling in the temperature range from 600 to 1100°C. It has been established that the lifetime under the conditions of thermal cycling is about five times shorter than it is predicted by the linear damage accumulation rule on the basis of results of isothermal creep tests. Faster creep under thermal cycling is caused by the rapid coarsening of the γ/γ' microstructure due to the periodic partial dissolution and reprecipitation of the γ' phase in heating and cooling half-cycles.
The phenomenon of environmental stress cracking is still a major issue in materials engineering as well as from a scientific perspective. Especially in the case of packaging materials made of high-density polyethylene, assessing the potential of premature damage due to environmental stress cracking is complex because of the large number of components in possible liquid filling goods. As a first guideline, the well-known effect of detergents and dispersants is usually considered, but the interplay with other components, such as organic solvents is often unknown. Particularly challenging in this respect are crop protection products, consisting of several different admixtures in addition to the biologically active ingredients. This study is based on two model liquids representing these admixtures that were established for testing in this context. The model liquids as well as their constituting components were used as liquid media in the Full Notch Creep Test to characterize the environmental stress cracking behavior of a typical high-density polyethylene. Complementary to the time-to failure of a notched specimen obtained from these tests, the crack opening was monitored optically, and the fracture surface was analyzed post-failure by laser scanning microscopy as well as scanning electron microscopy. Based on the results, the effect of various surfactants as well as the influence of organic solvents on environmental stress cracking are discussed.
The formation of pores in CMSX-4 nickel based superalloys is detrimental to the service life of the material. A way to avoid the problem is to treat the superalloys under Hot Isostatic Pressing (HIP), which enables a large volume fraction of pores to be annihilated. This paper aims to understand the contribution of plastic activity related to the gliding of dislocations on the pore annihilation. Simulations based on a phase-field model of dislocation are performed and make it possible to consider the strong anisotropy of the CMSX-4 under HIP conditions in conjunction to the strong elastic heterogeneity introduced by the pore. For pores with a radius of few micrometers, it is shown that edge parts of dislocation lines that present an extra half atomic plane oriented towards the pore are stacked above and under it in the direction which is perpendicular to their slip-planes, causing an increase of the number of dislocation along the four octahedral directions of the FCC single crystal which intersect the pore center. Results are streamlined within the isotropic elastic theory of dislocations. Effects of elastic anisotropy and dislocation reactions are also investigated in order to specify what would be the dislocation configuration around a pore in CMSX-4 under HIP conditions. Notably, the elastic anisotropy is shown to significantly modify the arrangement of dislocations close to the pore equator. Simulations also allow for the characterization of pore/dislocation interactions when dislocations are involved in Low Angle Boundaries as experimentally observed.