5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (460)
- Zeitschriftenartikel (416)
- Posterpräsentation (116)
- Beitrag zu einem Tagungsband (76)
- Forschungsdatensatz (27)
- Buchkapitel (11)
- Dissertation (10)
- Forschungsbericht (7)
- Sonstiges (5)
- Sammelband (Herausgeberschaft für den kompletten Band) (3)
Sprache
- Englisch (965)
- Deutsch (160)
- Mehrsprachig (9)
- Französisch (2)
- Russisch (1)
Schlagworte
- Additive Manufacturing (67)
- Additive manufacturing (61)
- Corrosion (57)
- Microstructure (44)
- Glass (40)
- Ontology (39)
- Creep (35)
- Fatigue (30)
- Transmission electron microscopy (30)
- EBSD (28)
- Degradation (19)
- Sintering (19)
- CCS (18)
- Ceramics (18)
- Crack growth (18)
- Crystallization (17)
- Residual stress (17)
- LCF (16)
- Steel (16)
- 316L (15)
- Ontologie (15)
- Additive Fertigung (14)
- Ceramic (14)
- Oxidation (14)
- High entropy alloys (13)
- Ti-6Al-4V (13)
- High temperature corrosion (12)
- Machine Learning (12)
- Nanoparticles (12)
- Aging (11)
- Aluminium (11)
- CCUS (11)
- Carbon steel (11)
- Electron microscopy (11)
- Fraktographie (11)
- Mechanical properties (11)
- Particle size (11)
- Scanning electron microscopy (11)
- 3D printing (10)
- Alloy 2618A (10)
- CALPHAD (10)
- CO2 (10)
- Coarsening (10)
- Crystal plasticity (10)
- FAIR (10)
- Fractography (10)
- Glas (10)
- High entropy alloy (10)
- Low Cycle Fatigue (10)
- Neutron diffraction (10)
- SEM (10)
- Simulation (10)
- AISI 316L (9)
- DCB (9)
- Diffraction (9)
- Digitalization (9)
- EN AW-2618A (9)
- Glass fiber reinforced polymers (9)
- Impurities (9)
- Laser powder bed fusion (9)
- Mikrostruktur (9)
- Slurry (9)
- Thermoelectrics (9)
- VSSA (9)
- Water speciation (9)
- X-ray diffraction (9)
- AGIL (8)
- Alumina (8)
- Digitalisierung (8)
- Geothermal (8)
- High-temperature corrosion (8)
- Hydrogen (8)
- Kriechen (8)
- Martensitic steel (8)
- Nickel-base superalloys (8)
- S-phase (8)
- Semantic Web Technologies (8)
- Sulfidation (8)
- TEM (8)
- Aluminium alloy (7)
- Anisotropy (7)
- Damage (7)
- Heat treatment (7)
- Layerwise slurry deposition (7)
- Mechanical testing (7)
- Plattform MaterialDigital (7)
- Powder (7)
- Semantic Interoperability (7)
- Soda-lime silicate glass (7)
- Thermomechanical fatigue (7)
- Vickers (7)
- Water content (7)
- Zugversuch (7)
- Bioactive glass (6)
- CO2 quality (6)
- Composite (6)
- Computed Tomography (6)
- Data Interoperability (6)
- Environmental stress cracking (6)
- Foaming (6)
- Full Notch Creep Test (6)
- HIP (6)
- In situ (6)
- Knowledge Representation (6)
- LTCC (6)
- Laser Powder Bed Fusion (6)
- Lattice parameters (6)
- Metallic glasses (6)
- Nano powder (6)
- P92 (6)
- Plasticity (6)
- Polymer (6)
- Residual Stress (6)
- Robotic melting (6)
- Sandwich (6)
- Schadensanalyse (6)
- Schädigung (6)
- Selective laser melting (6)
- Superalloy (6)
- Supercritical/dense phase CO2 (6)
- TMF (6)
- Viscosity (6)
- Wind turbine blades (6)
- Alterung (5)
- Betriebsfestigkeit (5)
- CCU (5)
- Carbon capture (5)
- Carbon steels (5)
- Creep behavior (5)
- Dark-field transmission electron microscopy (DFTEM) (5)
- Data mapping (5)
- Diesel (5)
- Diffusion (5)
- Dislocation (5)
- Droplet corrosion (5)
- Electron backscatter diffraction (5)
- Environmental stress cracking (ESC) (5)
- FAIR data (5)
- FAIR data management (5)
- Fe-Al alloys (5)
- Fracture (5)
- High alloyed steel (5)
- High-density polyethylene (5)
- Inconel 686 (5)
- Intermetallics (5)
- Iron aluminides (5)
- Keramik (5)
- Knowledge graph and ontologies (5)
- Lebensdauer (5)
- Microgravity (5)
- Mikroplastik (5)
- Modeling (5)
- Nanoindentation (5)
- Non-destructive testing (5)
- Normung (5)
- PMD Core Ontology (5)
- Phase-field simulation (5)
- Pipeline (5)
- Pipeline network (5)
- Polymer matrix composites (5)
- Reference data (5)
- Sample preparation (5)
- Shear modulus (5)
- Stress relaxation (5)
- Superaustenite steel (5)
- Tensile Test (5)
- Tensile testing (5)
- Texture (5)
- ToF-SIMS (5)
- Transmission electron microscopy (TEM) (5)
- Vickers indentation (5)
- Wissensrepräsentation (5)
- Workflow (5)
- X-ray refraction (5)
- Young's modulus (5)
- 3D-printing (4)
- AISI 304L (4)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Aluminum alloys (4)
- Bildanalyse (4)
- Binder Jetting (4)
- Brinell hardness (4)
- Calcination (4)
- Calcium cobaltite (4)
- Carbon capture storage (4)
- Carbon dioxide (4)
- Characterization (4)
- Chemically complex alloy (4)
- Coating (4)
- Composites (4)
- Compositionally complex alloys (4)
- Concrete (4)
- Crack propagation (4)
- Crack tip opening displacement (4)
- Creep-fatigue (4)
- Crystal orientation (4)
- Data Fusion (4)
- Data Space (4)
- Deuterium (4)
- EXAFS (4)
- Elastic modulus (4)
- Environmental Stress Cracking (4)
- Ermüdung (4)
- Fatigue crack growth (4)
- Finite element analysis (4)
- Fracture surface (4)
- Fracture toughness (4)
- Full-Notch Creep Test (FNCT) (4)
- GD-OES (4)
- Gassensorik (4)
- High Cycle Fatigue (4)
- High temperature (4)
- High-entropy alloy (4)
- High-entropy alloys (4)
- IN718 (4)
- In-space manufacturing (4)
- Inconel 718 (4)
- Internal friction (4)
- Kikuchi patterns (4)
- Low cycle fatigue (4)
- Martensite (4)
- Mechanical behavior (4)
- Metallic glass (4)
- Microplastics (4)
- Microstrucrue Design (4)
- Microstructural characterization (4)
- Microstructure Design (4)
- Microstructure evolution (4)
- Molecular dynamics (4)
- NTE (4)
- Nano (4)
- Nano-powder (4)
- Ni-Resist (4)
- Orientation (4)
- Oxidglas (4)
- PE-HD (4)
- Pattern matching (4)
- Pitting (4)
- Plastic deformation (4)
- Plattform Material Digital (4)
- Polyaniline (4)
- Precipitation (4)
- Raman spectroscopy (4)
- Recommendations (4)
- Reproducibility (4)
- Roughness (4)
- SIMS (4)
- Scale-bridging (4)
- Scarf repairs (4)
- Self-healing (4)
- Single crystal (4)
- Spectroscopy (4)
- Spray drying (4)
- Surface (4)
- Surface energy (4)
- TED-GC-MS (4)
- Tensile Test Ontology (4)
- Tensile test (4)
- Thermomechanics (4)
- Ultrasound (4)
- Virtual experiments (4)
- Welding (4)
- Whole-chain CCS scenario (4)
- XRD (4)
- Zerstörungsfreie Prüfung (4)
- Zirconia (4)
- 3D (3)
- 3D-Printing (3)
- Ab-initio (3)
- Advanced ceramics (3)
- Aluminium Alloy (3)
- Binder jetting (3)
- Bioceramics (3)
- Biodiesel (3)
- CFK (3)
- CLS (3)
- Carbon Fiber Reinforced Plastics (3)
- Carbon fibres (3)
- Cement (3)
- Ceramic spring (3)
- Computed tomography (3)
- Corrosion Fatigue (3)
- Corrosion fatigue (3)
- Coulomb explosion (3)
- Crack (3)
- Crack Propagation (3)
- Crack evolution (3)
- Crack healing (3)
- Creep data (3)
- Dark-field transmission electron microscopy (3)
- Datenbank (3)
- Defects (3)
- Destabilization (3)
- Dielectric breakdown (3)
- Dielectric strength (3)
- Diffraction Enhanced Imaging (3)
- Digital image correlation (3)
- Digitaler Zwilling (3)
- Digtial Representation (3)
- Diopside (3)
- Elastic constants (3)
- Electron Backscatter Diffraction (3)
- Electronic Lab Notebook (3)
- FIB (3)
- Ferritic-martensitic steels (3)
- Fracture Toughness (3)
- Fracture mechanics (3)
- Fracture surface analysis (3)
- Full notch creep test (FNCT) (3)
- GFRP (3)
- General Materials Science (3)
- Glass ceramic (3)
- Glass powder (3)
- Glass transition (3)
- Glass-ceramic (3)
- Glass-ceramics (3)
- Gold nanoparticles (3)
- Grain boundaries (3)
- Grain boundary (3)
- Grain boundary engineering (3)
- H2Safety@BAM (3)
- Hardness (3)
- High Entropy Alloy (3)
- High temperature mechanical properties (3)
- IN 718 (3)
- ISRU (3)
- In situ tensile test (3)
- Infrarotspektroskopie (3)
- Interfacial strength (3)
- Interoperability (3)
- Inverted classroom (3)
- Iron (3)
- Iron oxide nanoparticles (3)
- Kikuchi diffraction (3)
- Kikuchi pattern (3)
- Knowledge graph (3)
- Korrosion (3)
- Laser (3)
- Laser ablation in liquid (3)
- Laser beam melting (3)
- Laser cladding (3)
- Laser scanning microscopy (LSM) (3)
- Lattice misfit (3)
- Layerwise Slurry Deposition (3)
- Lightweight materials (3)
- Lithium Ion Batteries (3)
- Luftultraschall (3)
- ML (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Mechanische Eigenschaften (3)
- Metadata schema (3)
- Microhardness (3)
- Microstructure analysis (3)
- Multilayer (3)
- NMR spectroscopy (3)
- Nanomaterials (3)
- Nickel-based superalloys (3)
- Ontologies (3)
- Oxide Glasses (3)
- PBF-LB/M/316L (3)
- PMD (3)
- PMDco (3)
- Permeability (3)
- Phase transformations (3)
- Phase-field (3)
- Polyethylene (3)
- Porosity (3)
- Pressure-assisted sintering (3)
- Pulveraktivkohle (3)
- REM (3)
- Referenzdaten (3)
- Relaxation (3)
- Research Data Management (3)
- Residual Stresses (3)
- Residual stresses (3)
- Rotor blade (3)
- Röntgenrefraktion (3)
- S-Phase (3)
- SLM (3)
- Scintillators (3)
- Selective Laser Melting (3)
- Semantic Data (3)
- Semantic Web (3)
- Shape-memory alloys (3)
- SiO2 (3)
- Silicate Glasses (3)
- Silicon Carbide (3)
- Single-crystals (3)
- Slow crack growth (SCG) (3)
- Sol-gel (3)
- Sol-gel coating (3)
- Solid-state (3)
- Solubility (3)
- Stress intensity factor (3)
- Sulfiding (3)
- Superalloys (3)
- Superlegierung (3)
- Surface crystallization (3)
- Syngle Crystal alloy (3)
- TDEP (3)
- Temperature (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile data (3)
- Thermal expansion (3)
- Thermo-Mechanical Fatigue (3)
- Thermogravimetrie (3)
- Titanium (3)
- Titanium oxide (3)
- Topography (3)
- UV-irradiation (3)
- Utilization (3)
- Vickers hardness (3)
- Viscoplasticity (3)
- Wasser (3)
- Wind energy (3)
- Wind turbine blade shells (3)
- Windenergie (3)
- µ-gravity (3)
- μ-gravity (3)
- 3D Druck (2)
- AM (2)
- Additiv gefertigter Stahl (2)
- Adiabatic calorimeter (2)
- Ageing (2)
- Agglomerates (2)
- Aggressive environment (2)
- Air-coupled ultrasonic testing (2)
- Airborne ultrasonic testing (2)
- Al-Cu-Li alloys (2)
- Al2O3 (2)
- Alloy design (2)
- Aluminosilicate glasses (2)
- Aluminum (2)
- Aluminum alloy (2)
- Analysis (2)
- Analytische Zentrifuge (2)
- Annealing (2)
- Aquifer (2)
- Atom probe tomography (2)
- Austenitic stainless steel (2)
- Austenitic steel 316L (2)
- Automation (2)
- Bacteria (2)
- Belebtschlamm (2)
- Biaxial strength (2)
- Bio Ceramics (2)
- Bioactive Glass (2)
- Bioactivity (2)
- Biofilm (2)
- Bond energy (2)
- Bone regeneration (2)
- Brittle fracture (2)
- Bruchflächen (2)
- Bulk metallic glasses (2)
- CO2-storage (2)
- CT (2)
- Calciumcobaltit (2)
- Calciummanganat (2)
- Capture (2)
- Carbon (2)
- Carbon capture and storage (2)
- Carbon storage (2)
- Casting (2)
- CeO2 (2)
- Ceramic multilayer (2)
- Ceria (2)
- Chemo-mechanical coupling (2)
- Chromium oxide (2)
- Coatings (2)
- Condensate (2)
- Condensation (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Corrosion resistance (2)
- CrCoNi (2)
- CrMnFeCoNi (2)
- Crack propagation analysis (2)
- Creep-Fatigue (2)
- Crevice corrosion (2)
- Crop protection products (2)
- Cross linking (2)
- Cure process (2)
- Cyclic softening (2)
- DLS (2)
- Data Management (2)
- Data Structures (2)
- Data analysis (2)
- Data management (2)
- Dataset (2)
- Debinding (2)
- Deep Learning (2)
- Dehnungsfehler (2)
- Density (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Dental (2)
- Depth-profiling (2)
- Dielectric properties (2)
- Diffraction Elastic Constants (2)
- Diffraction contrast (2)
- Diffusion coefficient (2)
- Digital material representation (2)
- Digital representation (2)
- Digitization (2)
- Diopsid (2)
- Dislocations (2)
- Dispersion process (2)
- Distribution function (2)
- Ductile iron (2)
- Dynamic mechanical analysis (DMA) (2)
- EDX (2)
- EDXRD (2)
- Early oxidation (2)
- Elastic microstructure (2)
- Elasticity (2)
- Electron beam induced modification (2)
- Electron beam-induced fragmentation (2)
- Electron diffraction (2)
- Electron energy (2)
- Electron-beam-induced modification (2)
- Energy distribution (2)
- Environmental Stress Cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Epoxy (2)
- Erneuerbare Energien (2)
- Extensometer (2)
- FAIR Data Management (2)
- Fahrrad (2)
- Faser-Kunststoff-Verbunde (2)
- Faserkunststoffverbunde (2)
- Faseroptische Sensorik (2)
- Fatigue damage (2)
- Fatigue of sandwich shell structures (2)
- Fatigue performance (2)
- Fatigue testing (2)
- FeCr- alloys (2)
- Ferroelectret (2)
- Ferroelektret (2)
- Fiber reinforced polymer (2)
- Flowability (2)
- Fluoride phosphate glasses (2)
- Fracture Surface Analysis (2)
- Fracture surface energy (2)
- Fraktografie (2)
- Fungi (2)
- GFK (2)
- Geführte Ultraschallwellen (2)
- Gender gap (2)
- Gitterkonstanten (2)
- Glass Digital (2)
- Glass composition (2)
- Glass forming (2)
- Gold (2)
- Granules (2)
- HEA (2)
- Hard machining (2)
- Heat Treatment (2)
- High Alloyed Steel (2)
- High Entropy Alloys (2)
- High Temperature Corrosion (2)
- High Temperature Testing (2)
- Hochentropie-Legierung (2)
- Hochtemperatur (2)
- Hot pressing (2)
- Hot stage microscopy (2)
- Hydrogen permeation (2)
- IR (2)
- Imaging techniques (2)
- In-situ (2)
- Inconel 625 (2)
- Infrared spectroscopy (2)
- Infrastructure (2)
- Injection (2)
- Interface (2)
- Interfacial shear strength (2)
- Interphase (2)
- Ionic porosity (2)
- Joined nickel-based alloys (2)
- Kavitation (2)
- Keramikfeder (2)
- Kikuchi (2)
- Kleinprobenprüfung (2)
- Knowledge Graph (2)
- Kontrastierung (2)
- L-PBF (2)
- LPBF (2)
- LSD-print (2)
- Laminography (2)
- Laser Powder Bed fusion (2)
- Lattice distortion (2)
- Layerwise (2)
- Lead borate glasses (2)
- Leckdetektion (2)
- Li-ion battery (2)
- Long-term behavior (2)
- Long-term storage (2)
- Lorenz transmission electron microscopy (2)
- Lunar habitat (2)
- Lunar regolith (2)
- Lunar regolith simulant (2)
- MEA (2)
- MOUSE (2)
- Manganese oxide (2)
- Manufacturing (2)
- Mars (2)
- Martensitic transformation (2)
- Mass transport (2)
- Material Digital (2)
- Material degradation (2)
- Material digital (2)
- Materials Modelling (2)
- Materials science (2)
- Medium Entropy Alloys (2)
- Melt pool boundary (2)
- Metal seal (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Micro-shrinkages (2)
- Micromechanical model (2)
- Microstructural analysis (2)
- Microstructural evolution (2)
- Microstructure and texture (2)
- Microstructure-property-correlation (2)
- Mikrostrukturentwicklung (2)
- Mixed Ca-K-Na phosphates (2)
- Mixed gas atmosphere (2)
- Mobility (2)
- Monte-Carlo Simulation (2)
- Multiaxial deformation (2)
- Multifunctional nanoparticles (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- NDT (2)
- NFDI (2)
- Na and K rhenanites (2)
- Nano particle (2)
- Nano screening (2)
- Nanomaterial (2)
- Nanopulver (2)
- Nanostructure quantification (2)
- Native oxide (2)
- Neutron Diffraction (2)
- Nickel alloys (2)
- Nickel-base alloy (2)
- Niobium alloying (2)
- Notches (2)
- Nucleation (2)
- OECD TG 124 (2)
- Ontologien (2)
- Ontology development (2)
- Orientation precision (2)
- Oriented surface crystallization (2)
- Ostwald ripening (2)
- Oxidation behavior (2)
- Oxyfuel (2)
- Parametric modeling (2)
- Particle morphology (2)
- Partikelgrößenverteilung (2)
- Paving (2)
- Phase change material (2)
- Phase diagram (2)
- Phase separation (2)
- Phase transformation (2)
- Phase-Field Simulations (2)
- Phasenidentifikation (2)
- Photon counting detector (2)
- Pipelines (2)
- Polyethylen (2)
- Polyethylen hoher Dichte (2)
- Polyethylene, PE-HD (2)
- Polymer Matrix Composites (2)
- Porcelain (2)
- Pores (2)
- Preceramic polymer (2)
- Pressure assisted sintering (2)
- Probengrößeneffekt (2)
- Process monitoring (2)
- Protective coating (2)
- Präparation (2)
- Push-out Test (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Ratio refinement (2)
- Reaction sintering (2)
- Reaction-sintering (2)
- Recycling (2)
- Reference material (2)
- Refractory high entropy alloys (2)
- Ressidual stress (2)
- Review (2)
- Rissentwicklung (2)
- Risswachstum (2)
- Roboter (2)
- Robotische Glasschmelzanlage (2)
- Robotische Schmelzanlage (2)
- Rotorblattschalen (2)
- Round robin (2)
- Röntgen-Refraktion (2)
- Röntgenbeugung (2)
- S355 steel sheet (2)
- SAXS (2)
- Safety assessment (2)
- Salt eutectics (2)
- Scanning transmission electron microscopy (STEM) (2)
- Schadensprävention (2)
- Schwingstreifen (2)
- Semantic Representation (2)
- Semantic web (2)
- Semantisches Web (2)
- SensRef (2)
- Sensorik (2)
- Shear bands (2)
- Short-range order (2)
- Sibayak (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver nanoparticle (2)
- Silver-glass-metallization-paste (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Sinter additive (2)
- Sintering additives (2)
- Sintern (2)
- Size distribution (2)
- Slow crack growth (2)
- Small-angle scattering (2)
- Soda-lime-silica glass (2)
- Solar sintering (2)
- Sorption (2)
- Space (2)
- Spannungs-Dehnungs-Verhalten (2)
- Spannungsriss (2)
- Spring constant (2)
- Stainless steel (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Starch (2)
- Starch nanoparticle (2)
- Steels (2)
- Storage (2)
- Strength (2)
- Stress corrosion cracking (2)
- Structural Health Monitoring (SHM) (2)
- Structural steel (2)
- Struktur (2)
- Sulphidation (2)
- Superalloy single crystals (2)
- Superconducting magnet (2)
- Supercritical CO2 (2)
- Surface Energy (2)
- Surface nucleation (2)
- Surface treatments (2)
- Symmetric dwell periods (2)
- Synchrotron Tomography (2)
- Synchrotronstrahlung (2)
- Synthetic air (2)
- Temperaturschwankungen (2)
- Tensile Properties (2)
- Tensile properties (2)
- Thermal Spray (2)
- Thermal energy storage (2)
- Thermoanalyse (2)
- Thermodynamics (2)
- Thermoelectric (2)
- Thermoelectric oxide (2)
- Thermoelectric oxides (2)
- Thermoelectric properties (2)
- Thermographie (2)
- Thermography (2)
- Thermogravimetry (2)
- Thermomechanik (2)
- Thermoplastic (2)
- Thermoset polymers (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Topografie (2)
- Topographie (2)
- Toughness (2)
- Transmission electron microscope (TEM) (2)
- Transmissionselektronenmikroskopie (2)
- Transparent ceramics (2)
- Tribologie (2)
- Two Photon Polymerization (2)
- Under cyclic loading (2)
- Upconversion (2)
- Utilization, and storage (CCUS) technology (2)
- Viscous sintering (2)
- Volume specific surface area (2)
- Wall thickness (2)
- Wandler (2)
- Water-based (2)
- Weibull Distribution (2)
- Weibull distribution (2)
- Werkstoffprüfung (2)
- Wetting (2)
- Wind turbine (2)
- Wood protection (2)
- X-Ray Diffraction (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- X-ray laminography (2)
- XANES (2)
- Zero-g (2)
- Zugeigenschaften (2)
- corrosion (2)
- robotische Glasschmelzanlage (2)
- Öffentliche Sicherheit (2)
- 12%Cr steel (1)
- 150 Years (1)
- 2PP (1)
- 316L stainless steel (1)
- 3D REM (1)
- 3D Reconstruction (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D imaging (1)
- 3D materialography (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 5G (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AFM (1)
- AFM based test methods (1)
- ATZ (1)
- Abgasturbolader Heißteile (1)
- Abrasion (1)
- Abwasser (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Acid-leaching (1)
- Acids (1)
- Active thermography (1)
- Additive manufactured Ni-base superalloys (1)
- Adiabatic shear bands (1)
- Adolf Martens (1)
- Advanced high strength steels (1)
- Advanced manufacturing (1)
- Advanced wastewater treatment (1)
- Aerospace (1)
- Age hardening (1)
- Aggressive environement (1)
- Aggressive environments (1)
- Aggressive gases (1)
- Aging mechanisms (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alkali-activated materials (1)
- Allgemeine Grundlagen (1)
- Alloy (1)
- Alloy 2818A (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alpha-tricalcium phosphate (1)
- Alumina coatings (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminiumlegierung (1)
- Aluminum Alloy Aging (1)
- Amorphization (1)
- Amorphous silica (1)
- Analyse (1)
- Analytical scanning electron microscopy (1)
- Analytical services (1)
- Analytik (1)
- Angle measurement (1)
- Anhydrite (1)
- Anticorrosion (1)
- Anwendungen (1)
- Approximant (1)
- Aquifer fluid (1)
- Artefact (1)
- Artificial weathering (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atomic packing factor (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Atomization (1)
- Aufbau von Festkörpern (1)
- Aussonderugnsrate (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic cast iron (1)
- Austenitic steel (1)
- Austenitischer Stahl (1)
- Automatable digital approach (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automatische Finite Element Simulation (1)
- BCS (1)
- BET (1)
- BTEX (1)
- BTS (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Beanspruchung (1)
- Behmite (1)
- Berstdruck (1)
- Bilanzierung (1)
- Bimodal distribution (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactive (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Bioceramic (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Bioresorbable (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Blended learning (1)
- Blähen (1)
- Boden (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Breakdown strength (1)
- Brittle / ductile fracture behavior (1)
- Brown-rot fungi (1)
- Brownian motion (1)
- Bruch (1)
- Bruchflächenanalyse (1)
- Bruchflächenauswertung (1)
- Bubble formation (1)
- Bundesoberbehörden (1)
- Burst (1)
- Burst test (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CALPHAD databases analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CKAN (1)
- CMSX4 (1)
- CO2 Corrosion (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 separation membranes (1)
- CO2-Speicherung (1)
- CO2-corrosion (1)
- Cabon capture and storage (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calculated intrinsic fracture toughness (1)
- Calibration (1)
- Cantor alloy (1)
- Carbide phase NbC (1)
- Carbidic austempered ductile iron (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fibers (1)
- Carbon Fibre (1)
- Carbon capture, utilization and storage technology (1)
- Carbon fibre-reinforced-plastics (1)
- Carbon nanotubes (1)
- Casing (1)
- Catalogue of services (1)
- Cavitation (1)
- Ccs (1)
- CdTe quantum dots (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement-based materials (1)
- Centrifugal casting (1)
- Centrifugal compressor wheel (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramic springs (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chalcogenides (1)
- Characterisation (1)
- Charpy test (1)
- Chemically Complex Alloy (1)
- Chemically complex alloys (1)
- Chemische Analyse (1)
- Chemometrics (1)
- Chemometrie (1)
- Chromatography (1)
- Chromia (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-axial monitoring (1)
- Co-firing (1)
- Co-segregation (1)
- Co-firings (1)
- Co2-Storage (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Complex concentrated alloy (CCA) (1)
- Complex loading (1)
- Component assessment (1)
- Composite materials (1)
- Composite pressure vessels (1)
- Composite recycling (1)
- Composite structures (1)
- Composite testing (1)
- Compositionally complex alloy (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Coniophora puteana (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Contamination (1)
- Cooling rate (1)
- Cooling simulations (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion costs (1)
- Corrosion mechanism (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Covid-19 (1)
- Cow stress (1)
- Coûts de la corrosion (1)
- Cr2O3 (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Critical energy release rate (1)
- Crop protection formulations (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB geometry (1)
- DED-L (1)
- DIN (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage behavior (1)
- Damage evolution (1)
- Damage mechanisms (1)
- Data Exchange (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data fusion (1)
- Data infrastructures (1)
- Data linking (1)
- Data pipeline (1)
- Data pipeline concept (1)
- Data processing (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Datenfusion (1)
- Datenmanagement (1)
- Datenökosystem (1)
- Debonding (1)
- Deep learning (1)
- Defect detection (1)
- Defect population (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation behavior (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Demonstrators (1)
- Dense phase (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Dental ceramics (1)
- Dentine (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Die casting (1)
- Dielectric Spectroscopy (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffusivity (1)
- Digital Transformation (1)
- Digital Twin (1)
- Digital representations (1)
- Digital workflow (1)
- Digital workflows (1)
- Digitalizations (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Discrete element method (1)
- Dislocation avalanches (1)
- Dislocation substructure (1)
- Disordered assemblies (1)
- Disorientation (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Diversity (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Driving physical mechanism (1)
- Droplet (1)
- Druckgasspeicher (1)
- Dry preparation (1)
- Drywood termite (1)
- Dual-energy (1)
- Durchschlagfestigkeit (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- Dynamic mechanical analysis (1)
- Dynamic recrystallization (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EC4SafeNano (1)
- EFTEM (1)
- EIS (1)
- EN AW 2618A (1)
- EN AW 2618A a (1)
- EPR (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Eigenschaften (1)
- Eigenspannung (1)
- Elastic energy (1)
- Elastic properties (1)
- Elctronic Lab Notebook (1)
- Electric conductivity (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical deposition (1)
- Electrochemical dressing (1)
- Electrochemical impedance spectroscopy (1)
- Electromicroscopy (1)
- Electron Microscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron beam-induced charging (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- Electropolishing (1)
- Elektronisches Laborbuch (ELN) (1)
- Elektrotechnische Grundlagen (1)
- Enamel (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Endurance Limit (1)
- Energiedisersive Röntgenspektroskopie (1)
- Energiespeicherung (1)
- Energiewende (1)
- Energy harvesting (1)
- Energy transition (1)
- Entwicklung (1)
- Environment (1)
- Epitaxial films (1)
- Epoxidharz (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Ermüdungsriss (1)
- Etching (1)
- European Centre (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosionsschutz (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR Data (1)
- FAIR data. (1)
- FAIR principles (1)
- FAIR research data management (1)
- FCH JU (1)
- FIB Tomography (1)
- FNCT (1)
- FSDC (1)
- FT-IR (1)
- Fabrication (1)
- Fabrication method (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Failure test (1)
- Faser (1)
- Faser-Kunststoff-Verbund (1)
- Faseroptik (1)
- Faserverstärkte Kunstoffe (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue Testing (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stages (1)
- Fatigue fracture (1)
- Fatigue of sandwich structures (1)
- Fatigue striations (1)
- Fe-Mn steels (1)
- Federkonstante (1)
- Feldspar (1)
- Fem (1)
- Female noble prize winners (1)
- Femtosecond laser (1)
- Ferritic Alloys (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fertigungsprozess (1)
- Fertigungstechnologie (1)
- Festigkeit (1)
- Fiber (1)
- Fiber reinforced polymers (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Film depositition (1)
- Filters (1)
- Fine Powder (1)
- Finite element method (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- First year students (1)
- Flipped classroom (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Focused Ion Beam (1)
- Focussed ion beam growth (1)
- Foliengießen (1)
- Force-distance diagram (1)
- Formerkennung (1)
- Four-point bending test (1)
- Fourier series (1)
- Fourier transform infrared spectroscopy (1)
- Fracture Mechanics (1)
- Fracture behavior (1)
- Fracture surfaces (1)
- Fragility (1)
- Freeze Drying (1)
- Freeze casting (1)
- Fresnoit (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (FNCT) (1)
- Full notch creep test (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- Functional fatigue (1)
- Fused Filament Fabrication (1)
- GC-MS (1)
- GMR (1)
- GMR sensors (1)
- Gas flow assisted powder deposition (1)
- Gas permeation (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasdetektion (1)
- Gasgehalt (1)
- Gasturbinen (1)
- Gd3+ (1)
- Gefüge (1)
- Gefüge (Werkstoffkunde) (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- Gefügeuntersuchung (1)
- Gefügte Nickelbasislegierungen (1)
- General Aviation (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- Geometrical factors (1)
- Geopolymers (1)
- Gitterfehlpassung (1)
- Glas fibre reinforced polymer (1)
- GlasDigital (1)
- Glasfaserverstärkter Kunststoff (1)
- Glasmatrixkomposit (1)
- Glass Ceramic (1)
- Glass Fibres (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass fibre reinforced plastics (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass scintillator (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Glasses (1)
- Glasspeicher (1)
- Gleichgewicht (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Gold nanoparticle synthesis (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granulometrie (1)
- Graphic design (1)
- Graphite (1)
- Grenzflächenenergie (1)
- Growth kinetics (1)
- Growth rate (1)
- Grundlagen des Maschinenbaus (1)
- Grünfolieneigenschaften (1)
- Gypsum (1)
- HCF (1)
- HDPE Soprption (1)
- HDPE Sorption (1)
- HV-Insulation (1)
- Hardness test (1)
- Hartbearbeitung (1)
- Hausner ratio (1)
- Heat Treatments (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Heißgasextraktion (1)
- Heißgaskorrosion (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High - temperature corrosion (1)
- High Voltage Insulation (1)
- High alloyed steels (1)
- High cycle fatigue (1)
- High density polyethylene (1)
- High energy radiation (1)
- High entropy superalloys (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High pressure gas storage (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (PE-HD) (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Hochentropielegierung (1)
- Hochentropielegierungen (1)
- Hochleistungskeramik (1)
- Hochspannungsprüfung (1)
- Hochtemperaturbrennstoffzelle (1)
- Hochtemperaturermüdung (1)
- Homogenization (1)
- Honing (1)
- Honing Stone (1)
- Horizon 2020 (1)
- Host-guest hybrid materials (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hybrid Manufacturing (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen gas (1)
- Hydrogen permeability (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- Hyper-arid (1)
- IASCC (1)
- IN738LC (1)
- IR spectroscopy (1)
- Imaging (1)
- Impact damage (1)
- Impact wear (1)
- Implant failures (1)
- Implants (1)
- In situ diffraction (1)
- In situ synthesis (1)
- In situ thermal-annealing experiment (1)
- In-Situ Testing (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-situ tomography (1)
- In-vivo (1)
- In718 (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 686 coating (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Industrial and Manufacturing Engineering (1)
- Informationstechnische Grundlagen (1)
- Infrared nano AFM (1)
- Initial attachment (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interlaboratory comparability (1)
- Intermediate scale (1)
- Intermetallic (1)
- Intermetallische FeAl-Legierungen (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperable (1)
- Intrinsic stress (1)
- Invar (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Ion beam erosion Sectioning (1)
- Iron meteorite (1)
- Iron oxide (1)
- Irradiation (1)
- Irregular topography (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kalzinierung (1)
- Kennwertermittlung (1)
- Keramische Folien (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Klebung (1)
- Knowledge Graphs (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Komponentenprüfung (1)
- Kreislaufwirtschaft (1)
- Kriechermüdung (1)
- Kriechversuche (1)
- Kristallisation (1)
- Kristallorientierung (1)
- Kristallsystem (1)
- Kunststoffe (1)
- Kupfer (1)
- Kurzfaser-verstärkte Thermoplaste (1)
- Kurzzeitfestigkeit (1)
- L-PBF 316L (1)
- LIBS (1)
- LMD (1)
- LSD print (1)
- LTCC multilayer (1)
- Laboratory X-ray diffraction (1)
- Laminographie (1)
- Langzeitstabilität (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Poeder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Scanning Microscopy (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser beam melting (LBM) (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laser light scattering (1)
- Laser powder-based directed energy deposition (1)
- Laser-Pulverbettschmelzen (1)
- Laser-induced slip casting (1)
- Laserbearbeitung (1)
- Laserscanningmikroskopie (LSM) (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Lattices (1)
- Laves phase (1)
- Layer depostion (1)
- Layer system (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Lebensdauervorhersage (1)
- Lecture films (1)
- Lecture videos (1)
- Legierung mit komplexer Zusammensetzung (1)
- Lehrfilm (1)
- Lehrfilmformate (1)
- Life cycle (1)
- Lifetime prediction (1)
- Light curing (1)
- Lightweighting (1)
- Limestone Filler (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Lithium-ion batteries (1)
- Lithography-based technologies (1)
- Local landscape evolution (1)
- Localized plasmons (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Low-loading (1)
- Lösungsmittel (1)
- Lötverbindung (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic domains (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetische Domänen (1)
- Magnetoelastic effect (1)
- Magnetoelastischer Effekt (1)
- Magnetomechanical effect (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Master curve (1)
- Masterschädigungslinie (1)
- Mat-o-lab (1)
- Material Life Cycle (1)
- Material characterization (1)
- Material defects (1)
- Material failure (1)
- Material modeling (1)
- Material oxidation (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialkreislauf (1)
- Materialmodell (1)
- Materialprüfung (1)
- Materials Chemistry (1)
- Materials Data Space (1)
- Materials Science (1)
- Materials Testing (1)
- Materials and Processes Data Reusability (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Materialwissenschaft (1)
- Mathematisch-naturwissenschaftliche Grundlagen (1)
- Matrix (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical Behavior (1)
- Mechanical Properties (1)
- Mechanical and thermal testing (1)
- Mechanical anisotropy (1)
- Mechanical deformation (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Medium entopy alloy (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Medium-entropy alloy (1)
- Mehrachsige Verformung (1)
- Mehrskalenmodell (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metal powder characterization (1)
- Metall (1)
- Metallic Glass (1)
- Metallic components (1)
- Metallic materials (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metals and Alloys (1)
- Metformin (1)
- Methodology (1)
- Metrologie (1)
- Metrology (1)
- Micro computed tomography (1)
- Microbiologically influenced corrosion (1)
- Micromanipulation (1)
- Microplastic stress (1)
- Microsegregation (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural orientation (1)
- Microstructure Analysis (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure modification (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrogravitation (1)
- Mikrostrukturuntersuchung (1)
- Milling (1)
- Mindedestberstdruck (1)
- Mini-UAV (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Missing acknowledgment (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Mn3O4 (1)
- Model (1)
- Model alloy (1)
- Modell (1)
- Moisture (1)
- Molecular Dynamics (1)
- Molten salt (1)
- Monte-Carlo-Analysis (1)
- Moon (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial stress state (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NFDI-MatWerk (1)
- NGS (1)
- NIST (1)
- NMR (1)
- Nahinfrarotspektroskopie (1)
- Nano CRM (1)
- Nano material (1)
- Nano metal fluorides (1)
- Nano-assemblies (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-composite (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nano-safety (1)
- Nano-scratch test (1)
- NanoCAM (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterial screening (1)
- Nanoparticle structure (1)
- Nanoparticle synthesis (1)
- Nanopartikel (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Negative charged microparticle (1)
- Net zero (1)
- Networking (1)
- New standards (1)
- Ni-Mn-Ga (1)
- NiMaGa (1)
- NiTi (1)
- Nickel based coatings (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Nitride (1)
- Noble metal nanoparticles (1)
- Non-Destructive Testing (1)
- Non-desired foaming (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Nondestructive testing (1)
- Notch (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Number density (1)
- Numerische Simulation (1)
- Nydrogen melting (1)
- OECD TG (1)
- Oberflächenaktive wässrige Medien (1)
- Oberflächenkeimbildung (1)
- Online (1)
- Online Process Monitoring (1)
- Online quality control (1)
- Online teaching (1)
- Ooxidation (1)
- Optic (1)
- Optical and Magnetic Materials (1)
- Optical backscatter reflectometry (1)
- Optical centrifugation (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Optical fibre (1)
- Optical properties (1)
- Optical properties of glasses and ceramics (1)
- Optical spectroscopy (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orientation-dependent microstructure (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Overaging (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxide scale (1)
- Oxides (1)
- Oxygen evolution reaction (1)
- P92 steels (1)
- PA6.6 (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PPA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Particle Size Distribution (1)
- Particle size determination (1)
- Particle-bed binder jetting (1)
- Partikelgröße (1)
- Passive components and circuits (1)
- Patent (1)
- Peem (1)
- Permittivity reduction (1)
- Persistent luminescence (1)
- Persistent luminescent (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Phosphors (1)
- Photocatalysis (1)
- Photocleavable organosilanes (1)
- Photodynamic therapy (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Physical properties (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Phytolith (1)
- Pitting corrosion (1)
- Planetary surface (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Platinum-group-metals (1)
- Plattform Material Digital (PMD) (1)
- Pole figures (1)
- Polymer Matrix Composite (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymerwissenschaften (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Pore (1)
- Porosification (1)
- Porous materials (1)
- Portfolio (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder deposition (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Power factor (1)
- Power law (1)
- Power plant (1)
- Power-to-Gas (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- ProMoAM (1)
- Process (1)
- Process Monitoring (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Proficiency test (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Property simulation (1)
- Protection (1)
- Prozessmonitoring (1)
- Pseudosymmetry (1)
- Pull-out (1)
- Pull-out composite materials (1)
- Pultruded fiber rods (1)
- Pycnometry (1)
- Quality assurance (1)
- Quantitative Precipitation Analysis (1)
- Quantitative image analysis (1)
- Quantum dots (1)
- Radiation-matter interaction (1)
- Radii distribution (1)
- Radon transform (1)
- Rafting (1)
- Raman (1)
- Reaction Sintering (1)
- Real time growth control (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference Material (1)
- Reference material BCR-425 (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Refractory alloy (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Refractory superalloys (1)
- Regelwerke (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Relaxation metallic glasses (1)
- Relaxation tests (1)
- Relaxationsphänomene (1)
- Reliability (1)
- Reliable characterization (1)
- Renewable ernergy (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Residual strains (1)
- Residual stress analysis (1)
- Resistance (1)
- Resistance spot welding (1)
- Resistance stress (1)
- Resonance testing (1)
- Restberstfestigkeit (1)
- Reusability (1)
- Reusable data (1)
- Rheology (1)
- Rhodonia placenta (1)
- Risikoanalyse (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissfortschritt (1)
- Rissheilung (1)
- Rissverlauf (1)
- Robot-assisted galss melting (1)
- Robotic glass melting (1)
- Rohrprobekörper (1)
- Rotorblatt (1)
- Rotorblätter (1)
- Round Robin (1)
- SDC (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEN-Probe (1)
- SHM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Sailplane Development Panel (1)
- Sall-angle scattering (1)
- Salt melt (1)
- Salzschmelzen (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich structures (1)
- Sandwichstruktur (1)
- Scaffold (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scarf joint (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- Scavenging effect of iron (1)
- Schadenskunde (1)
- Schalenprüfstand (1)
- Schlickerdeposition (1)
- SchwarzP cells (1)
- Schwerelosigkeit (1)
- Schwingbrüche (1)
- Scratches (1)
- Screen printing (1)
- Screening method (1)
- Segregation (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic structuring (1)
- Semantische Daten (1)
- Semiconductor materials (1)
- Sensing (1)
- Sensor (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Sewage treatment plant (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silber (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silicon release (1)
- Silikatkeramik (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Simulation workflow (1)
- Simulationsgestützte Gießkonzepte (1)
- Single crystal Ni-Base superalloys (1)
- Single crystal superalloys (1)
- Single fiber pull-out test (1)
- Single-crystal (1)
- Sinter retardation (1)
- Sintering additive (1)
- Sintering atmosphere (1)
- Sintermechanismen (1)
- Sintertemperatur (1)
- Sinterung (1)
- Sinus floor augmentation (1)
- Size (1)
- Size and size distribution (1)
- Size effect (1)
- Sliding simulation (1)
- Slip localization (1)
- Slip-rolling (1)
- Slow Crack Growth (SCG) (1)
- Slurry optimization (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Softening temperature (1)
- Soil (1)
- Soil sample (1)
- Solar panels (1)
- Solid solution strengthening (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solidification (1)
- Space exploration (1)
- Spar cap design (1)
- Spark plasma sintering (1)
- Specific surface (1)
- Specimen geometry (1)
- Spezifische Oberfläche (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Split-vacancy defect complexes (1)
- Spring constant (1)
- Stable crack growth (1)
- Standardisation (1)
- Stanzen (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strain rate dependence (1)
- Stratégies deprévention (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Streuung (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural health monitoring (SHM) (1)
- Structure (1)
- Structure property correlations (1)
- Structure-property correlation (1)
- Structured Data (1)
- Structured heating (1)
- Subcritical crack growth (1)
- Subsurface defects (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Superlegierungen (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface Nucleation (1)
- Surface elasticity (1)
- Surface modification (1)
- Surface roughness (1)
- Surface stress (1)
- Surface-induced Melting (1)
- Swept wavelength interferometry (1)
- Swept wavelength interferometry (SWI) (1)
- Symbolik (1)
- Synchrotron (1)
- Synchrotron CT (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiation (1)
- Synchrotron radiations (1)
- Synchrotron tomography (1)
- Synthesis (1)
- Systematische Schadensanalysen, Prozeduren (1)
- T1 precipitate (1)
- TAHYA (1)
- TED (1)
- TIG-welding (1)
- TMF experiments (1)
- Tb3+ (1)
- Technical Ceramics (1)
- Technische Keramik (1)
- Temperature dependence (1)
- Temperature driven process (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Tensile stress relaxation testing (1)
- Tensile tests (1)
- Termites (1)
- Test Improvement (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Texturation (1)
- Theranostics (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal degradation (1)
- Thermal desorption mass spectrometry (1)
- Thermal stress (1)
- Thermische Analyse (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical loading (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-optical measurement (1)
- Thermoanalysis (1)
- Thermoanalytical Methods (1)
- Thermobimetal (1)
- Thermodynamic analysis (1)
- Thermodynamic stability (1)
- Thermodynamische Stabilität (1)
- Thermoelectric generator (1)
- Thermoelectric generator design (1)
- Thermoelektrika (1)
- Thermoelektrischer Generator (1)
- Thermogravimetric analysis (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Eigenschaften (1)
- Thermomechanische Ermüdung (1)
- Thermophysikalische Eigenschaften (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thesaurus (1)
- Thickening (1)
- Thin films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Time-offlight Diffraction (TOFD) (1)
- Tomography (1)
- Tools (1)
- Tooth wear (1)
- Transducers (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Two-photon-polymerization (1)
- Ultraschall (1)
- Ultrasonic Testing (1)
- Ultrasonic assited machining (1)
- Umgebungsbedingter Spannungsriss (1)
- Ungleichgewicht (1)
- Unidirectional composites (1)
- Unlegierter Baustahl (1)
- Upconversion nanoparticles (1)
- VCSEL (1)
- VM12 SHC (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Verbundwerkstoff (1)
- Verbundwerkstoffe (1)
- Vernetzung (1)
- Versetzungsstrukturen (1)
- Very high cycle fatigue (1)
- Vickers Hardness (1)
- Virtueller Materialdatenraum (1)
- Viscoelastic model (1)
- Viscose sintering (1)
- Viskoplastisch (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume Fraction (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Wasserstoff (1)
- Wasserstofferzeugung (1)
- Waste water (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Welding processing influences (1)
- Werkstoffauswahl (1)
- Werkstoffdaten (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Wet chemical etching (1)
- Wet dispersion (1)
- White light emitters (1)
- Wind turbine blade shell structures (1)
- Windkraft (1)
- Withstand voltage tests (1)
- Women in science (1)
- Work of adhesion (1)
- Workshop (1)
- Wärmespeicher (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray imaging (1)
- X-ray refractography (1)
- X-ray scattering (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRM (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- ZfP (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- Zug-Druck-Schubprüfung (1)
- Zugversuchsontologie (1)
- Zyklische Belastung (1)
- Zyklische R-Kurve (1)
- alumina (1)
- arbidic austempered ductile iron (1)
- arbon capture (1)
- ausfgallfreie Lastwechsel (1)
- battery aging mechanism (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- coarsening (1)
- condensate (1)
- current collector corrosion (1)
- dental (1)
- depth profiles (1)
- dispersion (1)
- electrochemical characterization (1)
- electron microscopy (1)
- hardness (1)
- high entropy alloys (1)
- high pressure (1)
- hydrogen storage (1)
- impurities (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- laser cladding (1)
- microstructural changes (1)
- microstructure analysis (1)
- multi scale testing (1)
- negative crystal growth (1)
- oxidation (1)
- particle size determination (1)
- phosphate glasses (1)
- pitting corrosion (1)
- sample preparation (1)
- scanning electron microscopy (1)
- selective laser melting (1)
- statistische Auswertung (1)
- sulfidation (1)
- thermomechanische Beanspruchung (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- water speciation (1)
- zertifizierte Referenzmaterialien (1)
- Überblick (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (1137)
- 5.1 Mikrostruktur Design und Degradation (338)
- 5.2 Metallische Hochtemperaturwerkstoffe (277)
- 5.4 Multimateriale Fertigungsprozesse (216)
- 5.6 Glas (151)
- 5.3 Polymere Verbundwerkstoffe (131)
- 5.5 Materialmodellierung (115)
- 8 Zerstörungsfreie Prüfung (107)
- 9 Komponentensicherheit (98)
- 7 Bauwerkssicherheit (91)
Paper des Monats
- ja (11)
Thermal spraying enables a fast and propelling way to additively deposit various ceramics as electric insulators, which are used in conditions where polymers are not suitable. Alumina (Al2O3) is among the most employed materials in the coating industry since it exhibits good dielectric properties, high hardness, high melting point while still being cost-effective. Various parameters (e.g. feedstock type, plasma gas mixture, plasma power) significantly influence the resulting coating in terms of microstructure, porosity, crystallinity, and degree of un-or molten particles. As a consequence, these parameters need to be investigated to estimate the impact on the electrical insulating properties of thermally sprayed alumina. This study focuses on the development of a novel electric insulation coating from Al2O3 feedstock powders deposited via atmospheric plasma spray (APS). The microstructure, porosity, and corresponding crystallographic phases have been analyzed with optical microscopy, XRD, and SEM images. To achieve an understanding of the parameters influencing the electrical insulation performance of the manufactured coatings, an in-depth analysis of the fundamental dielectric parameters e.g., DC resistance, breakdown strength, dielectric loss tangent, permittivity is presented.
Multilayer thermoelectric generators are a promising perspective to the conventional π-type generators. Ceramic multilayer technology is well established for production of microelectronics and piezo-stacks. Key features of ceramic multilayer technology are full-automation, cost-effectiveness, and the co-firing of all materials in one single step. This requires similar sintering temperatures of all used materials. The development of multilayer thermoelectric generators is a subject of current research due to the advantages of this technology. One of the challenges is the compatibility of the different materials with respect to the specific design.
The presented study compares three different designs of multilayer generators based on a given set of material properties. Dualleg, unileg and transverse multilayer generators are compared to conventional π-type generators., the designs are evaluated regarding the expected maximum output power and power density using analytical calculations and FEM simulations. Additionally, the complexity of the production process and material requirements are assessed and design optimizations to simplify production are discussed.
Besides the theoretical aspects, unileg multilayer generator prototypes were produced by tape-casting and pressure-assisted sintering. These prototypes are compared to other multilayer generators from literature regarding the power factors of the used material system and the power density. Improvements of the power output by design optimizations are discussed
The interest to additively manufacture Nickel-based superalloys has substantially grown within the past decade both academically and industrially. More specifically, additive manufacturing processes such as laser powder bed fusion (LPBF) offer the ability to produce dense parts within a single manufacturing step. In fact, the exceptional freedom in design associated with the layer-based nature of the processes is of particular interest for the complex shapes typically required in turbine applications. In certain cases, the overall part performance can be achieved by tailoring the microstructure and the crystallographic texture to the specific application. However, these advantages must be paid at a price: the large local temperature gradients associated with the rapid melting and solidification produce parts that inherently contain large residual stress in the as-manufactured state. In addition, the presence of pores in the final part may further affect the in-service part failure. As among Nickel-based alloys Inconel 718 exhibits excellent weldability, this alloy has been widely studied in open research in the domain of LPBF. However, significant microsegregation of the heavier alloying elements such as Niobium and Molybdenum accompanied by dislocation entanglements may preclude the application of conventional heat treatment schedules. Therefore, different post processing heat treatments are required for laser powder bed fused Inconel 718 as compared to conventional variants of the same alloy.
In this study, we investigated two different heat treatment routes for LPBF Inconel 718. In a first routine, the samples were stress relieved and subsequently subjected to hot isostatic pressing (HIP) followed by a solution heat treatment and a two-step age (referred to as FHT). In a second routine, the samples were subjected to a single-step direct age post stress relieving heat treatment (referred to DA). We investigated the consequences of such heat treatment schedules on the microstructure, texture, and mechanical behavior. We show that by applying a DA heat treatment the typical columnar microstructure possessing a crystallographic texture is retained, while an equiaxed untextured microstructure prevails in case of an FHT heat treatment. We further evaluate how these heat treatments affect the mechanical behaviour on the macroscopic and microscopic scale.
The fracture surface of slow and continuous crack propagation during environmental stress cracking of a semicrystalline polyethylene exhibits isotropic roughness exponents at the local scale but resolved across the macroscopic fracture surface a clear position dependence is found. The spatially resolved roughness exponent admits values in the range between 0.1 and 0.4, demonstrating nontrivial exponents in the small length-scale regime. Instead, they vary across the fracture surface according to the stress-state distribution, which suggests that the exponents are intimately linked to the locally dominating dissipation processes during craze cracking.
Entwicklung der Mikrostruktur der mechanischen Eigenschaften und der Eigenspannungen in L-PBF 316L
(2022)
Die additive Fertigung (AM) metallischer Werkstoffe mittels Laser Powder Bed Fusion (L-PBF) ermöglicht einzigartige hierarchische Mikrostrukturen, die zu Verbesserungen bestimmter mechanischer Eigenschaften gegenüber konventionell hergestellten Varianten derselben Legierung führen können. Allerdings ist das L-PBF-Verfahren häufig durch das Vorhandensein hoher Eigenspannungen gekennzeichnet, die es zu verstehen und zu mindern gilt. Daher ist das Verständnis der Mikrostrukturen, der Eigenspannungen und der daraus resultierenden mechanischen Eigenschaften entscheidend für eine breite Akzeptanz bei sicherheitskritischen Anwendungen. Die BAM hat ein multidisziplinäres Forschungsprogramm gestartet, um diese Aspekte bei LPBF 316L zu untersuchen. Der vorliegende Beitrag stellt einige der wichtigsten Ergebnisse vor: der Einfluss von Prozessparametern auf die Mikrostruktur, der Einfluss von Mikrostruktur und Textur auf die Festigkeit, Kriechverhalten und Schädigung und die Stabilität von Eigenspannungen und Mikrostruktur unter Wärmebehandlungsbedingungen.
Currently, calcium manganate CaMnO3 and calcium cobaltite Ca3Co4O9 are being investigated as n-type resp. p-type semiconducting materials as oxidation- and temperature-resistant thermoelectric materials for oxide multilayer thermoelectric generators (TEGs). In order to manufacture multilayer TEGs, pressure-assisted sintering processes at high temperatures are necessary to achieve optimal thermoelectric material properties. To realize TEGs in planar film technology, another method to obtain dense ceramic layers directly from the synthesized starting powders without a subsequent high temperature step is emerging recently: the powder aerosol deposition (PAD) method. In the present work, it is investigated whether PAD is suitable to produce dense ceramic films from Sm-doped CaMnO3 and Ca3Co4O9 powders. The resulting thermoelectric properties are characterized as a function of temperature.
CaMnO3 powder could successfully be processed by PAD with resulting layer thicknesses of 5- 6 µm without any high-temperature sintering steps of the films. The electrical conductivity and the Seebeck coefficient of the films were determined in-plane from room temperature to 600 °C in air. The results show a Seebeck coefficient of around -200 µV/K, which is comparable to results of pressed and sintered bars. At 400 °C, the electrical conductivity corresponds to the conductivity of the bar. At higher temperatures the conductivity is better than with the reference. Below 400°C, the electrical conductivity is somewhat lower than that of the reference sample, a mild thermal treatment of the PAD layer improves it. It is expected that the thermal conductivity of the PAD film will be lower compared to the bars due to the nano-crystalline film morphology. This should result in a significantly increased ZT value for the PAD layers and a higher efficiency of the TEG.
The work shows that both CaMnO3 and Ca3Co4O9 can be successfully processed by PAD, and the PAD films show comparable thermoelectric properties.
Die HÜTTE ist ein Kompendium und Nachschlagewerk für unterschiedliche Aufgabenstellungen. Durch Kombination der Einzeldisziplinen dieses Wissenskreises kann das multidisziplinäre Grundwissen für die verschiedenen Technikbereiche und Ingenieuraufgaben zusammengestellt werden.
Die HÜTTE enthält in drei Bänden - orientiert am Stand von Wissenschaft und Technik und den Lehrplänen der Technischen Universitäten und Hochschulen - die Grundlagen des Ingenieurwissens.
Band 2 enthält die Grundlagen des Maschinenbaus und ergänzende Fächer.
Melting of Na2CO3-ZnO-B2O3 batches containing up to 16.8 wt% AgNO3 (5 mol% Ag2O in the target glass composition) was observed in situ by means of hot stage microscopy. In all batches metallic silver precipitation took place as most of the silver nitrate was reduced to metallic silver before Ag+ ions could be dissolved in the evolving borate melts. In turn, only traces of Ag+ (<300 ppmw) were dissolved in the sodium zinc borate glass melts under study. It is assumed that the oxidation to Ag+ was limited due to poor availability of reducible oxygen in the glass melts and presence of Na2O being a stronger base than Ag2O. Thus, the precipitated metallic silver formed droplets of different sizes. The larger droplets (d > 20 µm) were already settled at the bottom of the container and remained constant in size upon dwelling for 1 h at 1050 °C of about one hour and the subsequent cooling (45 K/min) to room temperature, whereas the smaller droplets (d < 20 µm) were mobile in the borate melt due to Marangoni and Stokes motion. For the latter droplets, coalescence was observed in situ. A growth of larger droplets at the expense of smaller ones, i.e., Ostwald ripening was also expected but could not be studied with the used experimental equipment.
Liquid phase sintering of glass bearing silver pastes used in photovoltaics and microelectronics is poorly understood. In particular, the role of different network modifiers acting in the glass component and the question of the most suitable atmospheric oxygen level during sintering are still under considerable debate. To tackle these issues, low-melting and lead-free X2O-ZnO-B2O3 glasses with X = Li, Na, K and Rb (LZB, NZB, KZB and RZB) were prepared. Infrared spectroscopy showed that the glass structure was similar to each other, while an increase of tetrahedrally coordinated boron with increasing field strength of the alkali was evident. In turn, the glass transition temperature (from differential thermal analysis) increased in the order: RZB (449 °C) < KZB (460 °C) < NZB (465 °C) < LZB (472 °C). Powders of each glass were mixed with organics to receive silver-glass-pastes containing 30 vol% glass and these were subjected to heating microscopy in air. Although similar onset temperatures of sintering were recorded for Ag-NZB and Ag-LZB glass pastes, and for Ag-RZB paste and KZB-Ag-paste, respectively, differences in the crystallization behavior and final densification were observed between the former and the latter group. These were translated in terms of differences in silver dissolution and reprecipitation among the two groups. Further, running the experiments in nitrogen gas showed that sintering of all pastes was considerably hampered. The slow-down of the sinter kinetics was found to be in line with the assumed lower oxidation and dissolution of silver ions into the glass-forming liquid.
Monte-Carlo-Analysis of Minimum Burst Requirements for Composite Cylinders for Hydrogen Service
(2021)
For achieving Net Zero-aims hydrogen is an indispensable component, probably the main component. For the usage of hydrogen, a wide acceptance is necessary, which requires trust in hydrogen based on absence of major incidents resulting from a high safety level. Burst tests stand for a type of testing that is used in every test standard and regulation as one of the key issues for ensuring safety in use. The central role of burst and proof test is grown to historical reasons for steam engines and steel vessels but - with respect for composite pressure vessels (CPVs) - not due an extraordinary depth of outcomes. Its importance results from the relatively simple test process with relatively low costs and gets its importance by running of the different test variations in parallel. In relevant test und production standards (as e. g. ECE R134) the burst test is used in at least 4 different meanings. There is the burst test on a) new CPVs and some others b) for determining the residual strength subsequent to various simulations of ageing effects. Both are performed during the approval process on a pre-series. Then there is c) the batch testing during the CPVs production and finally d) the 100% proof testing, which means to stop the burst test at a certain pressure level. These different aspects of burst tests are analysed and compared with respect to its importance for the resulting safety of the populations of CPVs in service based on experienced test results and Monte-Carlo simulations. As main criterial for this the expected failure rate in a probabilistic meaning is used. This finally ends up with recommendations for relevant RC&S especially with respect to GTR 13.
To reveal the corrosion resistance of casing steel/mortar interface in CO2 injection condition, sandwich samples were prepared and exposed up to 20 weeks in aquifer fluid under 10 MPa and 60 °C. Cross section analysis revealed the crevice corrosion as main mechanism instead of pitting corrosion, which would be expected to happen in the extremely high Chloride concentration. Detailed analysis using EDS line scan shown the slow diffusion of Chloride, suggesting why pitting did not happen after 20 weeks. To mimic the passivated steel surface, the steel coupon was passivated in simulated pore solution having pH 13.5 for 42 days. The passivated coupon was further exposed to NGB solution for 28 days. Electrochemical characterization was performed along the exposure processes to reveal the change in impedance, indicating the corrosion resistance of steel casing/mortar interface.
Fully-reversed fatigue behavior of scarf joint repairs for wind turbine blade shell applications
(2022)
Due to manufacturing imperfections which can propagate to damage under in-service loads, wind turbine rotor blades, made primarily of glass fiber reinforced polymers (GFRP), often fail significantly before their design life. To enable a quick and cost-effective return to service, localized repairs can be executed by technicians in the field, directly accessing the blades by suspended roping. Scarf joint repairs, shown to be highly efficient with a smooth load transition across angled joint walls and a restored aerodynamic profile, are the focus of this study. The damage mechanisms of these structures were examined under fully-reversed mechanical cyclic loading with a load ratio R = -1, which was made possible on the coupon scale by a custom designed anti-buckling support. The number of cycles to failure were compared across load levels. While the scarf joint ratio was held constant at 1:50, known from industry and literature to be a good compromise between restored mechanical properties and repair size, the layup sequence was varied between small-to-large and large-to-small. Hereby the effect of the presence of resin pockets and fiber orientation mismatch between the parent and repair structure on the failure mechanism as well as fatigue strength of ±45° GFRP scarf joint repair structures was studied. Strain development across the joint length was measured to assess stiffness degradation in addition to the fatigue strength recovery of scarf joint structures with respect to pristine reference specimens. Grayscale analysis was used to monitor the damage state leading to fracture across the specimens. Post-mortem fractography analysis with light microscopy described the global failure mechanisms as well as local damage distribution within the structure, all of which provided insight to critical variables in scarf joint GFRP structures under fully-reversed mechanical cyclic loading, allowing for the tailoring of such repairs on wind turbine blade shells for maximum restoration of service life.
To reveal the corrosion resistance of casing steel/mortar interface in CO2 injection condition, sandwich samples were prepared and exposed up to 20 weeks in aquifer fluid under 10 MPa and 60 °C.
Cross section analysis revealed the crevice corrosion as main mechanism instead of pitting corrosion despite very high concentration of Cl in NGB.
EDS element line scan analysis of the 20-week-exposed metal/mortar coupon showed Chloride distribution, which still not reached the metal/mortar interface, explaining no pitting was observed.
It was confirmed that FeCO3 cannot protect the steel surface in CO2 saturated NGB.
To verify the protective possibility of passivation happened on casing steel/mortar interface, simulated pore solution was synthesized and used to passivate the steel for 42 days. OCP and EIS confirmed the formation of passive layer.
The 42 day passivated layer was broken during the first minute of exposure in CO2 saturated NGB.
However, due to high concentration of Ca2+, a new carbonate CaCO3 dense layer was formed, increased the corrosion resistance of steel surface.
Glasses in the systems Me2O-ZnO-B2O3 with Me = Li, Na, K, Rb (MeZB), Na2O-ZnO-CuO-B2O3 (NZCuB), CaO-ZnO-B2O3 (CaZB), and Li2O-PbO-B2O3 (LPbB) as a reference, were studied by differential thermal analysis, dilatometry, rotational viscometry, and heating microscopy. A decrease of viscosity and sintering range was found with decreasing number of fourfold coordinated boron. The viscosity of the alkali zinc borate glasses varies only slightly. LPbB and CaZB stand out by their reduced and increased viscosities, respectively. Sodium, potassium, and calcium zinc borate glasses possess a fragility above 76. All glasses were sintered to full density before crystallization. Mostly binary zinc borate phases govern crystallization. A ternary crystalline phase was detected only in the potassium containing sample. The Weinberg glass stability parameter ranges between 0.07 and 0.12. This is caused by the presence of several crystalline phases and varying melting points of even the same crystalline phase in different glass matrices.
Low melting Li2O-PbO-B2O3, Me2O-ZnO-B2O3, Me = Li, Na, K, Rb and CaO-ZnO-B2O3 glasses were studied with Raman and infrared spectroscopies to advance the structural understanding of zinc borate glasses as potential candidates for substitution of lead containing glasses. Although the effect of type of alkali ions on the number (N4) of fourfold coordinated boron (B4) in the glasses is small, the alkali ions direct the type of borate groups, i.e., pentaborate in lithium, sodium, and calcium zinc borate glasses, as well as diborate in potassium and rubidium containing ones. Both groups were simultaneously found in Li2O-PbO-B2O3. Alkali ions are mainly responsible for the formation of B4-units and metaborate. Zinc ions favorably compensate non-bridging oxygen and partially form ZnO4. With decreasing N4 and field strength of the alkali ions the atomic packing density, glass transition temper ature and Young’s Modulus also decrease. The coefficient of thermal expansion increases with decreasing N4.
BAM is currently building up a platform of novel nanoRMs relying on iron oxide nanoparticles of different shape, size and surface chemistry. Iron oxide was chosen as a core material because of its relevance to the material and life sciences.
As a first candidate of this series, we present cubic iron oxide nanoparticles with a nominal edge length of 8 nm. These particles were synthesized by thermal decomposition of iron oleate in high boiling organic solvents adapting well-known literature procedures. After dilution to a concentration suitable for electron microscopy (TEM and SEM) as well as for small-angle X-ray scattering (SAXS) measurements, the candidate nanoRM was bottled and assessed for homogeneity and stability by both methods following the guidelines of ISO 17034 and ISO Guide 35.
The particle sizes obtained by both STEM-in-SEM and TEM are in excellent agreement with a minimum Feret of 8.3 nm ± 0.7 nm. The aspect ratio (AR) of the iron oxide cubes were extracted from the images as the ratio of minimum Feret to Feret resulting in an AR of 1.18 for TEM to 1.25 for SEM. Alternatively, a rectangular bounding box was fitted originating from the minimum Feret and the longest distance through the particle in perpendicular direction. This led to AR values of 1.05 for TEM and 1.12 for SEM, respectively. The results confirm the almost ideal cubic shape.
The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[111]-type textures along their loading direction. In addition to changes in the Young’s moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[111]-type texture. However, the relative behavior of the specimens possessing an [001]/[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed.
This study combines three different approaches to lower the sintering temperature of Sm-doped CaMnO3 to save energy in production and facilitate co-firing with other low-firing oxides or metallization. The surface energy of the powder was increased by fine milling, sintering kinetics were enhanced by additives, and uniaxial pressure during sintering was applied. The shrinkage, density, microstructure, and thermoelectric properties were evaluated. Compared to micro-sized powder, the use of finely ground powder allows us to lower the sintering temperature by 150 K without reduction of the power factor. By screening the effect of various common additives on linear shrinkage of CaMnO3 after sintering at 1100 ○C for 2 h, CuO is identified as the most effective additive. Densification at sintering temperatures below 1000 ○C can be significantly increased by pressure-assisted sintering. The power factor at room temperature of CaMnO3 nano-powder sintered at 1250 ○C was 445 μW/(m K2). Sintering at 1100 ○C reduced the power factor to 130 μW/(m K2) for CaMnO3 nano-powder, while addition of 4 wt.% CuO to the same powder led to ∼290 μW/(m K2). The combination of fine milling, CuO addition, and pressureassisted sintering at 950 ○C resulted in a power factor of ∼130 μW/(m K2). These results show that nano-sized powder and CuO addition are successful and recommendable strategies to produce CaMnO3 with competitive properties at significantly reduced temperatures and dwell times.
Influence of the dispersant on the parts quality in slurry-based binder jetting of SiC ceramics
(2022)
Binder jetting is establishing more and more in the ceramic industry to produce large complex shaped parts. A parameter with a great impact on the quality of the parts is the binder–powder interaction. The use of ceramic slurries as feedstock for this process, such as in the layerwise slurry deposition–print technology, allows a great flexibility in the composition. Such slurries are typically composed of ceramic powder, water, and small amounts of various additives. The understanding of the effect of these components on the printing quality is thus essential for the feedstock development. Four models were developed regarding the impact of additives, such as dispersants on printing. These models were confirmed or rebutted by experiments performed for an SiC slurry system with two different concentrations of a dispersant and a commercial phenolic resin used as a binder. It is shown that for this system the influence of the dispersant on the curing behavior and the clogging of the pores by dispersant can be neglected. The redispersion of the dispersant after the curing of the resin has no or only a minor effect. However, the wetting behavior determined by the surface energies of the system seem to be most crucial. In case the surface energy of the slurry additive is significantly lower than the surface energy of the binder, the strength of the green parts and the printing quality will be low. This was shown by inverse gas chromatography, contact angle measurement, rheological characterization, and mechanical tests with casted samples.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. Powder bed fusion and binder jetting especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability.
The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method which enables the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder layer. This offers high flexibility in the ceramic feedstock used, especially concerning material and particle size.
The LSD technology can be combined with binder jetting to develop the so-called “LSDprint” process for the additive manufacturing of ceramics.
The LSDprint technology combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing.
In this presentation, the LSD process will be introduced and several examples of application ranging from silicate to high-performance ceramics will be shown.
Recent developments towards the scale-up and industrialization of this process will be discussed, alongside future perspectives for the multi-material additive manufacturing.
A global transition towards more sustainable, affordable and reliable energy systems is being stimulated by the Paris Agreement and the United Nation's 2030 Agenda for Sustainable Development. This poses a challenge for the corrosion industry, as building climate‐resilient energy systems and infrastructures brings with it a long‐term direction, so as a result the long‐term behaviour of structural materials (mainly metals and alloys) becomes a major prospect. With this in mind “Corrosion Challenges Towards a Sustainable Society” presents a series of cases showing the importance of corrosion protection of metals and alloys in the development of energy production to further understand the science of corrosion, and bring the need for research and the consequences of corrosion into public and political focus. This includes emphasis on the limitation of greenhouse gas emissions, on the lifetime of infrastructures, implants, cultural heritage artefacts, and a variety of other topics.
The phenomenon of environmental stress cracking is still a major issue in materials engineering as well as from a scientific perspective. Especially in the case of packaging materials made of high-density polyethylene, assessing the potential of premature damage due to environmental stress cracking is complex because of the large number of components in possible liquid filling goods. As a first guideline, the well-known effect of detergents and dispersants is usually considered, but the interplay with other components, such as organic solvents is often unknown. Particularly challenging in this respect are crop protection products, consisting of several different admixtures in addition to the biologically active ingredients. This study is based on two model liquids representing these admixtures that were established for testing in this context. The model liquids as well as their constituting components were used as liquid media in the Full Notch Creep Test to characterize the environmental stress cracking behavior of a typical high-density polyethylene. Complementary to the time-to failure of a notched specimen obtained from these tests, the crack opening was monitored optically, and the fracture surface was analyzed post-failure by laser scanning microscopy as well as scanning electron microscopy. Based on the results, the effect of various surfactants as well as the influence of organic solvents on environmental stress cracking are discussed.
Early Material Damage in Equimolar CrMnFeCoNi in Mixed Oxidizing/Sulfiding Hot Gas Atmosphere
(2022)
The use of more and more varied fuels implies an increased list of criteria that need to be addressed when choosing a material for a combustion chamber and its supply pipes. The materials must be very resistant against corrosion, especially when the process takes place at temperatures above 500°C. In this work the influence of SO2 on the surface of the “Cantor alloy” is investigated.
Spurenelemente spielen eine wichtige Rolle bei der Verfeinerung der Eigenschaften von komplexen Materialien. Diese Arbeit zeigt die Korrelation zwischen der Mikrostruktur, der Gitterfehlpassung und den Kriecheigenschaften. Die Legierung Al10Co25Cr8Fe15Ni36Ti6 (in at. %) mit komplexer Zusammensetzung wurde mit den Elementen Hf und W verstärkt. Die Zugabe von Hf bewirkt eine eckigere Form der würfelförmigen gamma'-Ausscheidungen und einen erhöhten Anteil der Heusler-Phase. Die Zugabe von W wiederum formt die Würfelchen rundlicher und löst die Heusler-Phase auf. Eine Mischung der beiden Spurenelemente zeigt einen Übergang zwischen den beiden Extremen, sowohl in Hinsicht auf die Form der Ausscheidungen als auch in Bezug auf die Gitterfehlpassung und die Kriecheigenschaften.
Early Material Damage in Equimolar CrMnFeCoNi in Mixed Oxidizing/Sulfiding Hot Gas Atmosphere
(2022)
The challenges to use more varied fuels at medium and high temperatures above 500 °C need to be addressed by tuning the materials towards a better resistance against increased corrosion. As a first step the corrosion processes need to be better understood, especially in the case of the unavoidable and highly corrosive sulfur-based gases. In this work oxidation/sulfidation of an equimolar CrMnFeCoNi high entropy alloy is studied at an early stage after hot gas exposure at 600 °C for 6 h in 0.5% SO2 and 99.5% Ar. The oxidation process is studied by means of x-ray diffraction, scanning and transmission electron microscopy and supported by thermodynamic calculations. It is found that the sulfur does not enter the bulk material but interacts mainly with the fast-diffusing manganese at grain boundary triple junctions at the alloy surface. Sub-micrometer scaled Cr-S-O rich phases close to the grain boundaries complete the sulfur-based phase formation. The grains are covered in different Fe, Mn and Cr based spinels and other oxides.
Hierarchical microstructures are created when additional γ particles form in γ’ precipitates and they are linked to improved strength and creep properties in high-temperature alloys. Here, we follow the formation and evolution of a hierarchical microstructure in Ni86.1Al8.5Ti5.4 by in situ synchrotron X-ray diffraction at 1023 K up to 48 h to derive the lattice parameters of the γ matrix, γ’ precipitates and γ particles and misfits between phases. Finite element method-based computer simulations of hierarchical microstructures allow obtaining each phase's lattice parameter, thereby aiding peak identification in the in situ X-ray diffraction data. The simulations further give insight into the heterogeneous strain distribution between γ’ precipitates and γ particles, which gives rise to an anisotropic diffusion potential that drives the directional growth of γ particles. We rationalize a schematic model for the growth of γ particles, based on the Gibbs-Thomson effect of capillary and strain-induced anisotropic diffusion potentials. Our results highlight the importance of elastic properties, elastic anisotropy, lattice parameters, and diffusion potentials in controlling the behavior and stability of hierarchical microstructures.
BAM! This issue of Advanced Engineering Materials celebrates 150 years of scientific and technical research at the interface between academia, industry and politics. Rooted in 1871 at the birth of the German Empire and at that time located in simple basements and barracks, the institutional development began around mechanical metallurgy of iron and steel and represents today a diverse portfolio of fore-front research that orients itself along tomorrow's societal challenges and long-term research horizons.
We demonstrate the gradual shift from scale-free intermittent microplasticity to a scale-dependent behavior via the introduction of a variety of microstructural features within the Al-Cu binary alloy system. As long as the obstacles to dislocation motion remain shearable, the statistics of intermittent microplasticity has fat-tailed contributions. The introduction of incoherent precipitates leads to a complete transition from scale-free powerlaw scaling to an exponential and scale-dependent distribution. These results demonstrate how non-Gaussian interactions survive across different microstructures and further suggest that characteristic microstructural length scales and obstacle pinning-strengths are of secondary importance for the intermittency statistics, as long as dislocations can shear their local environment.
The pore geometry of bone scaffolds has a major impact on their cellular response; for this reason, 3D printing is an attractive technology for bone tissue engineering, as it allows for the full control and design of the porosity. Calcium phosphate materials synthesized from natural sources have recently attracted a certain interest because of their similarity to natural bone, and they were found to show better bioactivity than synthetic compounds. Nevertheless, these materials are very challenging to be processed by 3D printing due to technological issues related to their nanometric size. In this work, bone scaffolds with different pore geometries, with a uniform size or with a size gradient, were fabricated by binder jetting 3D printing using a biphasic calcium phosphate (BCP) nanopowder derived from cuttlebones. To do so, the nanopowder was mixed with a glass-ceramic powder with a larger particle size (45–100 µm) in 1:10 weight proportions. Pure AP40mod scaffolds were also printed. The sintered scaffolds were shown to be composed mainly by hydroxyapatite (HA) and wollastonite, with the amount of HA being larger when the nanopowder was added because BCP transforms into HA during sintering at 1150 ◦C. The addition of bio-derived powder increases the porosity from 60% to 70%, with this indicating that the nanoparticles slow down the glass-ceramic densification. Human mesenchymal stem cells were seeded on the scaffolds to test the bioactivity in vitro. The cells’ number and metabolic activity were analyzed after 3, 5 and 10 days of culturing.
The cellular behavior was found to be very similar for samples with different pore geometries and compositions. However, while the cell number was constantly increasing, the metabolic activity on the scaffolds with gradient pores and cuttlebone-derived powder decreased over time, which might be a sign of cell differentiation. Generally, all scaffolds promoted fast cell adhesion and proliferation, which were found to penetrate and colonize the 3D porous structure.
Thermoelectric generators can be used for energy harvesting by directly transforming a temperature gradient into a voltage. Multilayer generators based on ceramic multilayer technology are an interesting alternative to conventional π-type generators. They exhibit several advantages like high filling factor, possibility of texturing, co-firing of all materials in one single-step, and reduction of production costs due to the high possible degree of automation. But, co-firing of promising oxide thermoelectric materials, Ca3Co4O9 (p-type) and CaMnO3 (n-type), is very challenging due to the large difference in sintering temperature (300 K).
In this work we show the material development of Ca3Co4O9, CaMnO3, and insulation for multilayer generators co-fired under uniaxial pressure at 900 °C. The materials are tailored regarding their sintering behavior, electrical performance and coefficients of thermal expansion. Tape-casting and pressure assisted sintering are applied to fabricate textured Ca3Co4O9. Compared to conventional sintering, pressure assisted sintering increases the strength by the factor 10 and the power factor by the factor of 20. The combination of sintering additives and uniaxial pressure is used to decrease the sintering temperature of CaMnO3 to 900 °C while maintaining acceptable thermoelectric properties.
Different generator designs (unileg and pn-type) were fabricated and analyzed regarding microstructure and thermoelectric performance. A lower level of complexity is beneficial for co-firing and performance. The unileg demonstrators reach 80% of the simulated output power and the power output is highly reproducible between the different demonstrators (99%).
Turbine blades often contain cylindric holes used to generate an air film that protects the blade alloy from the hot gases. These cooling holes of diameter around one mm are drilled by laser through the thickness of the blades. Unfortunately, the resulting stress concentration and the drilling-induced damage are known to favor crack initiation from the holes. It is thus necessary to assess the impact of these cooling holes on the structural integrity of the blades. Since cracks initiate very readily, the fatigue life of the components is mainly controlled by the propagation of the cracks in the stress gradient induced by the holes.
For this purpose, displacement controlled high-temperature LCF (Low-Cycle-Fatigue) tests were performed with center hole specimens of a coarse-grained Nickel base Superalloy. The tests were stopped after a defined load drop. In addition, crack propagation tests with Double Edge Notch specimens were performed. Moreover, specimens with different hole surface finishes were investigated, which showed a detrimental effect of the hole surface roughness. In parallel, an evaluation of the LCF tests based on a fracture mechanics-based model (Madia et al., Eng. Fract. Mech., 2018) has been applied. Thereby, the specimen life is controlled by the crack propagation time until failure. Crack growth is controlled by a modified NASGRO equation accounting for large-scale yielding and a progressive build-up of crack closure. The initial crack size has been derived from the measurements of defects around the borehole. A reasonable agreement between predicted and measured lifetimes is observed if one keeps in mind the large uncertainty regarding the effective shape of the cracks.
Thermal spraying provides a rapid method for additive deposition of various ceramics as electrical insulation in applications where polymers are not suitable. New applications in complex shaped additive manufactured metal parts are emerging for example in large scale electrical devices. Microstructural and dielectric evaluation of coatings is crucial to the employment of such free-form processes. The properties and microstructure of the plasma sprayed alumina coatings are compared with dense reference samples of the same powder produced by spark plasma sintering (SPS). To obtain dense bulk samples from the coarse alumina powder for spray coating, SPS is used.
Samples are fabricated by atmospheric plasma spraying (APS) of commercially available alumina powder (d50 = 33 µm) on copper substrates and by SPS of the same powder. Microstructure and porosity were analyzed by optical microscopy and scanning electron microscopy (SEM). Phase compositions were determined by X-ray diffraction (XRD). Dielectric properties such as DC resistance, dielectric strength, dielectric loss, and relative permittivity were determined according to the standards. The microstructure and dielectric properties of the coating and bulk material are compared to assess whether the coating is suitable for use in electrical insulation application.
The scatter of fatigue crack growth data can become significant for coarse grained materials. By using a probabilistic description of crack propagation as the foundation of a lifetime prediction model, lifetime scatter of laboratory specimens can be reproduced. However, the lifetime of real components is subjected to additional scattering factors such as surface condition or uncertainty regarding direction and shape of emerging cracks. These factors need to be addressed in order to exploit the advantages of probabilistic description, i.e. the reduction of unnecessary conservatisms.
High temperature LCF (Low-Cycle-Fatigue) tests were performed with center hole specimens of a coarse-grained Nickel base Superalloy. In addition, crack propagation tests with Double Edge Notch specimens were performed. A procedure to detect the shape of the starting crack that combines the potential drop method and induction thermography was developed. The geometry and the number of notches were varied. Moreover, specimen with different hole surface finishes were investigated, which showed a detrimental effect of the roughness of the hole surface.
The results have been compared to predictions of a probabilistic tool for the estimation of lcf lifetime that has been calibrated beforehand on laboratory specimens with and without notches. In parallel, a fracture mechanics-based lifetime model was developed, which includes the initial crack size as a critical parameter. Thereby, the influence of the large grain size (>1mm), and the shape of the starting crack at the notch were considered.
Acknowledgements
The investigations are conducted as part of the joint research program COOREFLEX-Turbo in the frame of AG Turbo. The work is supported by Siemens AG and the Bundesministerium für Wirtschaft und Technologie (BMWi) as per resolution of the German Federal Parliament under grant number 03ET7071E.
Dielectric breakdown of insulators is a combined electrical, thermal, and mechanical failure. The exact breakdown mechanism in ceramics and the formulation of useful models are still subject of investigation. Recent studies highlighted that several experimental aspects of dielectric breakdown strength testing affect the test results, and thus impede the recognition of fundamental principles.
Excess field strength near the electrode can lead to premature breakdown in the insulating liquid. This would cause superficial damage to the test specimen and thus falsify the measurement results.
The field strength distribution is influenced by the ratio of permittivity of the sample and the surrounding insulating liquid. Premature breakdown depends on the breakdown strength of the liquid and the actual test voltage. The test voltage again depends on the specimen thickness.
To systematically investigate these relations, a numerical simulation study (FEM) of the electric field distribution in a typical testing rig with cylindrical electrodes was performed. The permittivity of the sample and the insulating liquid was parameterized, as well as the sample thickness. The electric field distribution was calculated for increasing test voltage. Field strength maxima are compared to experimental breakdown strength of typical insulating liquids and experimental breakdown locations on alumina. Strategies are discussed to adjust the insulation liquid and the sample thickness to reduce the influence of the testing setup on the dielectric breakdown strength results.
Artificial bone replacement by individual customized three-dimensional resorbable bioactive glass has not yet been widely established in the clinical use. This is mainly due to the antagonism of sintering ability and suitable bioactivity. Competitive crystallization often prevents the generation of dense sintered bodies, especially for additive manufactured 3D structures. Previous studies of the fluoride-containing glass F3 have shown its potential to combine both sintering ability and suitable bioactivity. Furthermore, the occurring sintering blockade by surface crystallization of Na2CaSi2O6 was tunable by glass particle size.
In this study the glasses F3, F3-Cu with 1 mol% CuO added at the expense of CaO and the well-known 13-93 were chosen to determine the influence of surface crystallization on 3D printed sinter bodies. For this purpose, grain size fractions in range of smaller 32 µm to 315 µm in fraction size of 6-20 µm were sieved from jaw crushed glass frit as well as glass cubes were cut from casted blocks for all glasses. Sintering behavior of both pressed and printed powder compacts was observed via heating microscopy. Crystallization was determined by DTA and crystallization progress was monitored on fractured sinter bodies and polished cubes via electron and laser scanning microscopy as well as with diffractometry.
Depending on grain size the formation of crystalline support framework along former grain boundaries shows the capability to stabilize fully densified sinter bodies before softening. Beside of this, the generation of complex hierarchic porosity was possible as well.
Sintering, crystallization, and foaming of 44.8SiO2–2.5P2O3–36.5CaO–6.6Na2O–6.6K2O–3.0CaF2 (F3) and 54.6SiO2–1.7P2O3–22.1CaO–6.0Na2O–7.9K2O–7.7MgO (13–93) bioactive glass powders milled in isopropanol and CO2 were studied via heating microscopy, differential thermal analysis, vacuum hot extraction (VHE), Infrared spectroscopy, and time-of-flight secondary ion mass spectrometry. Full densification was reached in any case and followed by significant foaming.
VHE studies show that foaming is driven by carbon gases and carbonates were detected by Infrared spectroscopy to provide the major foaming source. Carbonates could be detected even after heating to 750◦C, which hints on a thermally very stable species or mechanical trapping. Otherwise, dark gray compact colors for milling in isopropanol indicate the presence of residual carbon as well. Its significant contribution to foaming, however, could not be proved and might be
limited by the diffusivity of oxygen needed for carbon oxidation to carbon gas.
A new patented dynamic mechanical analysis (DMA) is presented, where the tensile, bending- or torsional stiffness of a media can be characterized in-situ during the phase transition from liquid to solid. An epoxy system, e.g. Hexion L285/H287, is filled into an elastomer container, such as a silicone tube. This can be mounted into a conventional DMA and, based on a linear viscoelastic approach, the storage modulus (E’;G’), the loss modulus (E’’;G’’) and the loss angle tan(delta) can be measured at constant temperature as a function of time in order to investigate the liquid to sol-gel to solid transition. With this new method, the stiffness increase as a result of the cure process can be directly measured more precisely than with a rheometer in a shear plate set-up, because using an elastomer container gives a defined cross section for calculating the Young’s modulus.
The large surface-to-volume ratio of nanoparticles is understood to be the source of many interesting phenomena. The melting temperature of nanoparticles is shown to dramatically reduce compared to bulk material. Yet, at temperatures below this reduced melting point, a liquid-like atomic arrangement on the surface of nanoparticles is still anticipated to influence its properties. To understand such surface effects, here, we study the coalescence of Au nanoparticles of various sizes using molecular dynamics simulations. Analysis of the potential energy and Lindemann index distribution across the nanoparticles reveals that high-energy, high-mobility surface atoms can enable the coalescence of nanoparticles at temperatures much lower than their corresponding melting point. The smaller the nanoparticles, the larger the difference between their melting and coalescence temperatures. For small enough particles and/or elevated enough temperatures, we found that the coalescence leads to a melting transition of the two nominally solid nanoparticles, here discussed in relation to the heat released due to the surface reduction upon the coalescence and the size dependence of latent heat. Such discontinuous melting transitions can lead to abrupt changes in the properties of nanoparticles, important for their applications at intermediate temperatures.
The steam side oxidation of ferritic–martensitic VM12-SHC steel was investigated under thermo-cyclic conditions in water steam at 620/320 °C and 30 bar with a focus on assessing the influence of pre-oxidation time, specimen geometry and surface finish. The specimens were pre-oxidized under isothermal conditions in water steam at 620 °C and 30 bar for 500 h or 1500 h. After pre-oxidation treatment, all specimens were subjected up to 258 thermal cycles. Three different geometries—rectangular coupons, U-shaped ring segments and ring samples—were investigated to evaluate the influence of open/closed shape, and flat/curved surface on corrosion rate. At the same time, two types of surface finish were considered: “as received” and “ground.” The formation of a protective scale by pre-oxidation was investigated. EBSD and ESMA analyses revealed that the Cr-content of the alloy appeared to be insufficient for obtaining a protective oxide scale under studied conditions, at the same time the anayses confirmed that initial oxidation depends on presence of minor alloying elements as Si and Mn, strong oxide formers which can alter the kinetics and morphology of the corrosion reaction. Moreover, rectangular coupons with small wall thickness and flat surface exhibited the highest corrosion rate, while “ground” curved samples showed only local oxidation. This indicates that for same pre-oxidation time, oxidation kinetics is controlled by curvature.
In typical material oriented research projects numerous types and sources of data need to get connected to form the final outcome. The data-structures have to be described in a manner semantically concise enough so that all participants share the meaning and at the same time flexible enough to allow connecting findings and facts that have not been connected before.
The present contribution describes the approach that is being taken in a public funded research project with two cooperating research institutes. The aim of the data-management solution is to describe and interlink three main entity types: material entities like a test specimen that is under observation, immaterial entities like a fatigue life model and processes that generate and transform the immaterial and material entities.
The shared understanding of what is described by the data is achieved by referring to existing linked data resources. In addition a common thesaurus that is subject to ongoing discussion is used for concepts and terms that need precision beyond publicly available concept descriptions. The data associated with the entities and processes and entities is rather small and well structured. The entities and processes covered by the vocabularies are typical to laboratories performing fatigue testing and microstructure analysis. Through the interlinking of the entities and processes it becomes possible to intuitively understand the knowledge that is accumulating in the database. For example it is easy to trace the history of a creep test specimen starting from the chemical composition that has been analyzed for the heat, continuing with the heat treatment of the material, going into the creep test itself with the associated creep data and finally finding the transmission electron microscopy images that have been taken from the crept sample.
The presented approach is prototypical way to tackle the sustainable management of structured open research data. Open questions remain for example with the management of attributions, the acceptance of an increased effort in data creation and the access control to specific regions of the data. On the other hand the approach sketches what added value can be created, if the community adopts and contributes to the linked data principles.
A nickel-based eutectic alloy with a γ/γ'-NbC structure was directionally solidified with a planar front. The specimens were tested for creep under sawtooth thermal cycling in the temperature range from 600 to 1100°C. It has been established that the lifetime under the conditions of thermal cycling is about five times shorter than it is predicted by the linear damage accumulation rule on the basis of results of isothermal creep tests. Faster creep under thermal cycling is caused by the rapid coarsening of the γ/γ' microstructure due to the periodic partial dissolution and reprecipitation of the γ' phase in heating and cooling half-cycles.
The dataset provided in this repository comprises data obtained from a series of characterization tests performed to a sheet of typical S355 (material number: 1.0577) structural steel (designation of steel according to DIN EN 10025-2:2019). The tests include methods for the determination of mechanical properties such as, e.g., tensile test, Charpy test and sonic resonance test. This dataset is intended to be extended by the inclusion of data obtained from further test methods. Therefore, the entire dataset (concept DOI) comprises several parts (versions), each of which is addressed by a unique version DOI.
The data were generated in the frame of the digitization project Innovationplatform MaterialDigital (PMD) which, amongst other activities, aims to store data in a semantically and machine understandable way. Therefore, data structuring and data formats are focused in addition to aspects in the field of material science and engineering (MSE). Hence, this data is supposed to provide reference data as basis for experimental data inclusion, conversion and structuring (data management and processing) that leads to semantical expressivity as well as for MSE experts being generally interested in the material properties and knowledge.
Tempered martensite-ferritic steels, such as the grade P92 steel studied in this contribution, exhibit pronounced macroscopic cyclic softening under isothermal low-cycle fatigue (LCF) and non-isothermal thermomechanical fatigue (TMF) conditions, which is considered to be the predominant degradation mechanism in high-temperature fatigue in this and other material groups. However, such softening processes are highly complex since microscopic (e.g., recovery) and macroscopic (e.g., crack initiation and growth), as well as global and local effects superimpose, especially under creep-fatigue conditions. In this contribution, we discuss the cyclic deformation and softening behavior of P92 in strain-controlled LCF, in-phase (IP) TMF, and out-of-phase (OP) TMF tests with and without dwell times in the temperature range from 300 °C to 620°C. EBSD-based dislocation analysis on various fatigued material states confirms the continuous redistribution and annihilation of geometrically necessary dislocations in all studied states, which can be quantitatively correlated with macroscopic softening despite different damage mechanisms for different test types. Deviations from this correlation are observed for OP TMF and LCF with dwell times, i.e., for conditions where optical microscopy reveals pronounced crack-oxidation interactions at the specimen surfaces.
In this study, the influence of aging and mean stress on fatigue of the aluminium-alloy EN AW-2618A is investigated. Therefore axial fatigue tests are carried out on smooth specimens. The experiments show that the fatigue life decreases with increasing mean stress. Furthermore, the tests with the overaged specimens demonstrate that the number of cycles to failure is decreasing with increasing aging time.
Laser powder-based directed energy deposition (DED-L) is a technology that offers the possibility for 3D material deposition over hundreds of layers and has thus the potential for application in additive manufacturing (AM). However, to achieve broad industrial application as AM technology, more data and knowledge about the fabricated materials regarding the achieved properties and their relationship to the manufacturing process and the resulting microstructure is still needed. In this work, we present data regarding the low-cycle fatigue (LCF) behavior of Ti-6Al-4V. The material was fabricated using an optimized DED-L process. It features a low defect population and excellent tensile properties. To assess its LCF behavior two conventionally manufactured variants of the same alloy featuring different microstructures were additionally tested. The strain-controlled LCF tests were carried out in fully reversed mode with 0.3 % to 1.0 % axial strain amplitude from room temperature up to 400°C. The LCF behavior and failure mechanisms are described. For characterization, optical microscopy (OM), scanning electron microscopy (SEM), and micro-computed tomography (µCT) were used. The low defect population allows for a better understanding of the intrinsic material’s properties and enables a fairer comparison against the conventional variants. The fatigue lifetimes of the DED-L material are nearly independent of the test temperature. At elevated test temperatures, they are similar or higher than the lifetimes of the conventional counterparts. At room temperature, they are only surpassed by the lifetimes of one of them. The principal failure mechanism involves multiple crack initiation sites.
This is the final report on the proficiency test (PT) „Measurement of the particle size distribution of ceramic powders by laser diffraction”. The PT was organized by the Federal Institute for Materials Research and Testing (BAM), division 5.5 “Advanced technical ceramics”. The measurements took place from 12/2021 to 03/2022. The aim of the interlaboratory comparison was the proficiency assessment of the participating laboratories.
Management and realization of PT were performed in accordance with DIN EN ISO/IEC 17043:2010.
The basis of the harmonized measuring procedure and the instructions for the interlaboratory comparison was the standard ISO 13320:2020.
The statistical analysis was performed in accordance with DIN ISO 13528:2020 by use of the software PROLab Plus (QuoData GmbH, Dresden, Germany).
A group of 44 laboratories from 17 countries participated in the PT. Laser diffraction analyzers produced by 7 different manufacturers were used. The three test materials were commercial products. Overall, the measured characteristic values of the particle distributions (d10, d50 and d90) were in the size range between 0.5 and 25 μm. The final report contains all individual results in an anonymous way.
The crack propagation rate of environmental stress cracking was studied on high-density polyethylene compact tension specimens under static loading. Selected environmental liquids are distilled water, 2 wt% aqueous Arkopal N100 solution, and two model liquid mixtures, one based on solvents and one on detergents, representing stress cracking test liquids for commercial crop protection products. The different surface tensions and solubilities, which affect the energetic facilitation of void nucleation and craze development, are studied. Crack growth in surface-active media is strongly accelerated as the solvents induce plasticization, followed by strong blunting significantly retarding both crack initiation and crack propagation. The crack propagation rate for static load as a function of the stress intensity factor within all environments is found to follow the Paris–Erdogan law. Scanning electron micrographs of the fracture surface highlight more pronounced structures with both extensive degrees of plasticization and reduced crack propagation rate, addressing the distinct creep behavior of fibrils. Additionally, the limitations of linear elastic fracture mechanisms for visco-elastic polymers exposed to environmental liquids are discussed.