5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (434)
- Zeitschriftenartikel (406)
- Posterpräsentation (114)
- Beitrag zu einem Tagungsband (77)
- Forschungsdatensatz (22)
- Buchkapitel (11)
- Dissertation (10)
- Forschungsbericht (7)
- Sonstiges (6)
- Sammelband (Herausgeberschaft für den kompletten Band) (3)
Sprache
- Englisch (924)
- Deutsch (159)
- Mehrsprachig (9)
- Französisch (2)
- Russisch (1)
Schlagworte
- Additive Manufacturing (66)
- Additive manufacturing (61)
- Corrosion (57)
- Microstructure (42)
- Creep (35)
- Glass (35)
- Transmission electron microscopy (30)
- Fatigue (29)
- EBSD (28)
- Ontology (28)
- Degradation (19)
- Sintering (19)
- CCS (18)
- Ceramics (18)
- Crack growth (18)
- Crystallization (17)
- Residual stress (17)
- LCF (16)
- Steel (16)
- 316L (14)
- Additive Fertigung (14)
- Oxidation (14)
- Ceramic (13)
- High entropy alloys (13)
- Ti-6Al-4V (13)
- High temperature corrosion (12)
- Machine Learning (12)
- Ontologie (12)
- Aging (11)
- Aluminium (11)
- CCUS (11)
- Carbon steel (11)
- Electron microscopy (11)
- Fraktographie (11)
- Particle size (11)
- Scanning electron microscopy (11)
- 3D printing (10)
- Alloy 2618A (10)
- CALPHAD (10)
- CO2 (10)
- Coarsening (10)
- Crystal plasticity (10)
- Fractography (10)
- High entropy alloy (10)
- Mechanical properties (10)
- Nanoparticles (10)
- Neutron diffraction (10)
- SEM (10)
- AISI 316L (9)
- DCB (9)
- Diffraction (9)
- EN AW-2618A (9)
- Glass fiber reinforced polymers (9)
- Impurities (9)
- Laser powder bed fusion (9)
- Low Cycle Fatigue (9)
- Mikrostruktur (9)
- Thermoelectrics (9)
- VSSA (9)
- Water speciation (9)
- X-ray diffraction (9)
- Alumina (8)
- Digitalisierung (8)
- FAIR (8)
- Geothermal (8)
- High-temperature corrosion (8)
- Hydrogen (8)
- Kriechen (8)
- Martensitic steel (8)
- Nickel-base superalloys (8)
- S-phase (8)
- Semantic Web Technologies (8)
- Slurry (8)
- Sulfidation (8)
- TEM (8)
- AGIL (7)
- Anisotropy (7)
- Damage (7)
- Digitalization (7)
- Glas (7)
- Heat treatment (7)
- Layerwise slurry deposition (7)
- Mechanical testing (7)
- Plattform MaterialDigital (7)
- Powder (7)
- Soda-lime silicate glass (7)
- Thermomechanical fatigue (7)
- Vickers (7)
- Water content (7)
- Zugversuch (7)
- Aluminium alloy (6)
- Bioactive glass (6)
- CO2 quality (6)
- Composite (6)
- Computed Tomography (6)
- Environmental stress cracking (6)
- Foaming (6)
- Full Notch Creep Test (6)
- HIP (6)
- In situ (6)
- Knowledge Representation (6)
- LTCC (6)
- Laser Powder Bed Fusion (6)
- Lattice parameters (6)
- Metallic glasses (6)
- Nano powder (6)
- P92 (6)
- Polymer (6)
- Residual Stress (6)
- Sandwich (6)
- Schadensanalyse (6)
- Schädigung (6)
- Selective laser melting (6)
- Superalloy (6)
- Supercritical/dense phase CO2 (6)
- TMF (6)
- Viscosity (6)
- Wind turbine blades (6)
- Alterung (5)
- Betriebsfestigkeit (5)
- CCU (5)
- Carbon capture (5)
- Carbon steels (5)
- Creep behavior (5)
- Dark-field transmission electron microscopy (DFTEM) (5)
- Data Interoperability (5)
- Diesel (5)
- Diffusion (5)
- Dislocation (5)
- Droplet corrosion (5)
- Electron backscatter diffraction (5)
- Environmental stress cracking (ESC) (5)
- Fe-Al alloys (5)
- Fracture (5)
- High alloyed steel (5)
- High-density polyethylene (5)
- Inconel 686 (5)
- Intermetallics (5)
- Iron aluminides (5)
- Keramik (5)
- Lebensdauer (5)
- Microgravity (5)
- Mikroplastik (5)
- Modeling (5)
- Nanoindentation (5)
- Non-destructive testing (5)
- Normung (5)
- PMD Core Ontology (5)
- Phase-field simulation (5)
- Pipeline (5)
- Pipeline network (5)
- Plasticity (5)
- Polymer matrix composites (5)
- Reference data (5)
- Sample preparation (5)
- Semantic Interoperability (5)
- Shear modulus (5)
- Simulation (5)
- Superaustenite steel (5)
- Tensile Test (5)
- Texture (5)
- ToF-SIMS (5)
- Transmission electron microscopy (TEM) (5)
- Vickers indentation (5)
- Wissensrepräsentation (5)
- X-ray refraction (5)
- Young's modulus (5)
- 3D-printing (4)
- AISI 304L (4)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Aluminum alloys (4)
- Bildanalyse (4)
- Binder Jetting (4)
- Calcination (4)
- Calcium cobaltite (4)
- Carbon capture storage (4)
- Carbon dioxide (4)
- Characterization (4)
- Chemically complex alloy (4)
- Coating (4)
- Composites (4)
- Compositionally complex alloys (4)
- Concrete (4)
- Crack propagation (4)
- Crack tip opening displacement (4)
- Creep-fatigue (4)
- Crystal orientation (4)
- Data Fusion (4)
- Deuterium (4)
- EXAFS (4)
- Elastic modulus (4)
- Environmental Stress Cracking (4)
- Ermüdung (4)
- FAIR data management (4)
- Fatigue crack growth (4)
- Finite element analysis (4)
- Fracture surface (4)
- Fracture toughness (4)
- Full-Notch Creep Test (FNCT) (4)
- GD-OES (4)
- Gassensorik (4)
- High Cycle Fatigue (4)
- High temperature (4)
- High-entropy alloy (4)
- High-entropy alloys (4)
- IN718 (4)
- In-space manufacturing (4)
- Inconel 718 (4)
- Internal friction (4)
- Kikuchi patterns (4)
- Knowledge graph and ontologies (4)
- Low cycle fatigue (4)
- Martensite (4)
- Mechanical behavior (4)
- Metallic glass (4)
- Microplastics (4)
- Microstrucrue Design (4)
- Microstructural characterization (4)
- Microstructure Design (4)
- Microstructure evolution (4)
- Molecular dynamics (4)
- NTE (4)
- Nano (4)
- Nano-powder (4)
- Ni-Resist (4)
- Orientation (4)
- Oxidglas (4)
- PE-HD (4)
- Pattern matching (4)
- Pitting (4)
- Plastic deformation (4)
- Polyaniline (4)
- Precipitation (4)
- Raman spectroscopy (4)
- Recommendations (4)
- Reproducibility (4)
- Roughness (4)
- SIMS (4)
- Scale-bridging (4)
- Scarf repairs (4)
- Self-healing (4)
- Single crystal (4)
- Spray drying (4)
- Stress relaxation (4)
- Surface (4)
- Surface energy (4)
- TED-GC-MS (4)
- Tensile test (4)
- Thermomechanics (4)
- Ultrasound (4)
- Virtual experiments (4)
- Welding (4)
- Whole-chain CCS scenario (4)
- XRD (4)
- Zerstörungsfreie Prüfung (4)
- Zirconia (4)
- 3D (3)
- 3D-Printing (3)
- Ab-initio (3)
- Advanced ceramics (3)
- Aluminium Alloy (3)
- Binder jetting (3)
- Bioceramics (3)
- Biodiesel (3)
- Brinell hardness (3)
- CFK (3)
- CLS (3)
- Carbon Fiber Reinforced Plastics (3)
- Carbon fibres (3)
- Cement (3)
- Ceramic spring (3)
- Computed tomography (3)
- Corrosion Fatigue (3)
- Corrosion fatigue (3)
- Coulomb explosion (3)
- Crack (3)
- Crack Propagation (3)
- Crack evolution (3)
- Crack healing (3)
- Creep data (3)
- Dark-field transmission electron microscopy (3)
- Data mapping (3)
- Datenbank (3)
- Defects (3)
- Destabilization (3)
- Dielectric breakdown (3)
- Dielectric strength (3)
- Diffraction Enhanced Imaging (3)
- Digital image correlation (3)
- Digitaler Zwilling (3)
- Diopside (3)
- Elastic constants (3)
- Electron Backscatter Diffraction (3)
- FIB (3)
- Ferritic-martensitic steels (3)
- Fracture Toughness (3)
- Fracture mechanics (3)
- Fracture surface analysis (3)
- Full notch creep test (FNCT) (3)
- GFRP (3)
- General Materials Science (3)
- Glass ceramic (3)
- Glass powder (3)
- Glass transition (3)
- Glass-ceramic (3)
- Glass-ceramics (3)
- Gold nanoparticles (3)
- Grain boundaries (3)
- Grain boundary (3)
- Grain boundary engineering (3)
- H2Safety@BAM (3)
- High Entropy Alloy (3)
- High temperature mechanical properties (3)
- IN 718 (3)
- ISRU (3)
- In situ tensile test (3)
- Infrarotspektroskopie (3)
- Interfacial strength (3)
- Inverted classroom (3)
- Iron (3)
- Iron oxide nanoparticles (3)
- Kikuchi diffraction (3)
- Kikuchi pattern (3)
- Korrosion (3)
- Laser (3)
- Laser ablation in liquid (3)
- Laser beam melting (3)
- Laser cladding (3)
- Laser scanning microscopy (LSM) (3)
- Lattice misfit (3)
- Layerwise Slurry Deposition (3)
- Lightweight materials (3)
- Lithium Ion Batteries (3)
- Luftultraschall (3)
- ML (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Mechanische Eigenschaften (3)
- Metadata schema (3)
- Microhardness (3)
- Microstructure analysis (3)
- Multilayer (3)
- NMR spectroscopy (3)
- Nanomaterials (3)
- Nickel-based superalloys (3)
- Oxide Glasses (3)
- PBF-LB/M/316L (3)
- PMDco (3)
- Permeability (3)
- Phase transformations (3)
- Phase-field (3)
- Polyethylene (3)
- Porosity (3)
- Pressure-assisted sintering (3)
- Pulveraktivkohle (3)
- REM (3)
- Referenzdaten (3)
- Relaxation (3)
- Residual Stresses (3)
- Residual stresses (3)
- Rotor blade (3)
- Round Robin (3)
- Röntgenrefraktion (3)
- S-Phase (3)
- SLM (3)
- Selective Laser Melting (3)
- Semantic Web (3)
- Shape-memory alloys (3)
- SiO2 (3)
- Silicate Glasses (3)
- Silicon Carbide (3)
- Single-crystals (3)
- Slow crack growth (SCG) (3)
- Sol-gel (3)
- Sol-gel coating (3)
- Solid-state (3)
- Solubility (3)
- Spectroscopy (3)
- Stress intensity factor (3)
- Sulfiding (3)
- Superalloys (3)
- Superlegierung (3)
- Surface crystallization (3)
- Syngle Crystal alloy (3)
- TDEP (3)
- Temperature (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile data (3)
- Tensile testing (3)
- Thermal expansion (3)
- Thermo-Mechanical Fatigue (3)
- Thermogravimetrie (3)
- Titanium (3)
- Titanium oxide (3)
- Topography (3)
- UV-irradiation (3)
- Utilization (3)
- Viscoplasticity (3)
- Wasser (3)
- Wind energy (3)
- Wind turbine blade shells (3)
- Windenergie (3)
- µ-gravity (3)
- μ-gravity (3)
- 3D Druck (2)
- AM (2)
- Additiv gefertigter Stahl (2)
- Adiabatic calorimeter (2)
- Ageing (2)
- Agglomerates (2)
- Aggressive environment (2)
- Air-coupled ultrasonic testing (2)
- Airborne ultrasonic testing (2)
- Al-Cu-Li alloys (2)
- Al2O3 (2)
- Alloy design (2)
- Aluminosilicate glasses (2)
- Aluminum (2)
- Aluminum alloy (2)
- Analysis (2)
- Analytische Zentrifuge (2)
- Annealing (2)
- Aquifer (2)
- Atom probe tomography (2)
- Austenitic stainless steel (2)
- Austenitic steel 316L (2)
- Automation (2)
- Bacteria (2)
- Belebtschlamm (2)
- Biaxial strength (2)
- Bio Ceramics (2)
- Bioactive Glass (2)
- Bioactivity (2)
- Biofilm (2)
- Bond energy (2)
- Bone regeneration (2)
- Brittle fracture (2)
- Bruchflächen (2)
- Bulk metallic glasses (2)
- CO2-storage (2)
- CT (2)
- Calciumcobaltit (2)
- Calciummanganat (2)
- Capture (2)
- Carbon (2)
- Carbon capture and storage (2)
- Carbon storage (2)
- Casting (2)
- CeO2 (2)
- Ceria (2)
- Chemo-mechanical coupling (2)
- Chromium oxide (2)
- Coatings (2)
- Condensate (2)
- Condensation (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Corrosion resistance (2)
- CrCoNi (2)
- CrMnFeCoNi (2)
- Crack propagation analysis (2)
- Creep-Fatigue (2)
- Crevice corrosion (2)
- Crop protection products (2)
- Cross linking (2)
- Cure process (2)
- Cyclic softening (2)
- DLS (2)
- Data Management (2)
- Data Structures (2)
- Data analysis (2)
- Data management (2)
- Dataset (2)
- Deep Learning (2)
- Dehnungsfehler (2)
- Density (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Dental (2)
- Depth-profiling (2)
- Dielectric properties (2)
- Diffraction Elastic Constants (2)
- Diffraction contrast (2)
- Diffusion coefficient (2)
- Digital material representation (2)
- Digitization (2)
- Digtial Representation (2)
- Diopsid (2)
- Dislocations (2)
- Dispersion process (2)
- Distribution function (2)
- Ductile iron (2)
- Dynamic mechanical analysis (DMA) (2)
- EDX (2)
- EDXRD (2)
- Early oxidation (2)
- Elastic microstructure (2)
- Elasticity (2)
- Electron beam induced modification (2)
- Electron beam-induced fragmentation (2)
- Electron diffraction (2)
- Electron energy (2)
- Electron-beam-induced modification (2)
- Electronic Lab Notebook (2)
- Energy distribution (2)
- Environmental Stress Cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Epoxy (2)
- Erneuerbare Energien (2)
- Extensometer (2)
- FAIR Data Management (2)
- FAIR data (2)
- Fahrrad (2)
- Faser-Kunststoff-Verbunde (2)
- Faserkunststoffverbunde (2)
- Faseroptische Sensorik (2)
- Fatigue damage (2)
- Fatigue of sandwich shell structures (2)
- Fatigue performance (2)
- FeCr- alloys (2)
- Ferroelectret (2)
- Ferroelektret (2)
- Fiber reinforced polymer (2)
- Flowability (2)
- Fracture Surface Analysis (2)
- Fracture surface energy (2)
- Fraktografie (2)
- Fungi (2)
- GFK (2)
- Geführte Ultraschallwellen (2)
- Gitterkonstanten (2)
- GlasDigital (2)
- Glass composition (2)
- Glass forming (2)
- Gold (2)
- Granules (2)
- HEA (2)
- Hard machining (2)
- Hardness (2)
- High Alloyed Steel (2)
- High Entropy Alloys (2)
- High Temperature Corrosion (2)
- High Temperature Testing (2)
- Hochentropie-Legierung (2)
- Hochtemperatur (2)
- Hot pressing (2)
- Hot stage microscopy (2)
- Hydrogen permeation (2)
- IR (2)
- Imaging techniques (2)
- In-situ (2)
- Inconel 625 (2)
- Infrared spectroscopy (2)
- Infrastructure (2)
- Injection (2)
- Interface (2)
- Interfacial shear strength (2)
- Interphase (2)
- Ionic porosity (2)
- Joined nickel-based alloys (2)
- Kavitation (2)
- Keramikfeder (2)
- Kikuchi (2)
- Kleinprobenprüfung (2)
- Knowledge Graph (2)
- Kontrastierung (2)
- L-PBF (2)
- LPBF (2)
- LSD-print (2)
- Laminography (2)
- Laser Powder Bed fusion (2)
- Lattice distortion (2)
- Layerwise (2)
- Lead borate glasses (2)
- Leckdetektion (2)
- Li-ion battery (2)
- Long-term behavior (2)
- Long-term storage (2)
- Lorenz transmission electron microscopy (2)
- Lunar habitat (2)
- Lunar regolith (2)
- Lunar regolith simulant (2)
- MEA (2)
- MOUSE (2)
- Manganese oxide (2)
- Mars (2)
- Martensitic transformation (2)
- Mass transport (2)
- Material Digital (2)
- Material degradation (2)
- Material digital (2)
- Materials Modelling (2)
- Materials science (2)
- Medium Entropy Alloys (2)
- Melt pool boundary (2)
- Metal seal (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Micro-shrinkages (2)
- Micromechanical model (2)
- Microstructural analysis (2)
- Microstructural evolution (2)
- Microstructure and texture (2)
- Microstructure-property-correlation (2)
- Mikrostrukturentwicklung (2)
- Mixed Ca-K-Na phosphates (2)
- Mixed gas atmosphere (2)
- Mobility (2)
- Monte-Carlo Simulation (2)
- Multiaxial deformation (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- NDT (2)
- NFDI (2)
- Na and K rhenanites (2)
- Nano particle (2)
- Nano screening (2)
- Nanomaterial (2)
- Nanopulver (2)
- Nanostructure quantification (2)
- Native oxide (2)
- Neutron Diffraction (2)
- Nickel alloys (2)
- Nickel-base alloy (2)
- Niobium alloying (2)
- Notches (2)
- Nucleation (2)
- OECD TG 124 (2)
- Ontologien (2)
- Ontology development (2)
- Orientation precision (2)
- Oriented surface crystallization (2)
- Ostwald ripening (2)
- Oxidation behavior (2)
- Oxyfuel (2)
- PMD (2)
- Parametric modeling (2)
- Particle morphology (2)
- Partikelgrößenverteilung (2)
- Paving (2)
- Phase change material (2)
- Phase diagram (2)
- Phase separation (2)
- Phase transformation (2)
- Phase-Field Simulations (2)
- Phasenidentifikation (2)
- Photon counting detector (2)
- Pipelines (2)
- Plattform Material Digital (2)
- Polyethylen (2)
- Polyethylen hoher Dichte (2)
- Polyethylene, PE-HD (2)
- Polymer Matrix Composites (2)
- Porcelain (2)
- Pores (2)
- Preceramic polymer (2)
- Pressure assisted sintering (2)
- Probengrößeneffekt (2)
- Process monitoring (2)
- Protective coating (2)
- Präparation (2)
- Push-out Test (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Ratio refinement (2)
- Reaction sintering (2)
- Reaction-sintering (2)
- Recycling (2)
- Reference material (2)
- Refractory high entropy alloys (2)
- Ressidual stress (2)
- Review (2)
- Rissentwicklung (2)
- Risswachstum (2)
- Roboter (2)
- Robotische Glasschmelzanlage (2)
- Rotorblattschalen (2)
- Röntgen-Refraktion (2)
- Röntgenbeugung (2)
- S355 steel sheet (2)
- SAXS (2)
- Safety assessment (2)
- Salt eutectics (2)
- Scanning transmission electron microscopy (STEM) (2)
- Schadensprävention (2)
- Schwingstreifen (2)
- Semantic Representation (2)
- Semantic web (2)
- Semantisches Web (2)
- SensRef (2)
- Sensorik (2)
- Shear bands (2)
- Short-range order (2)
- Sibayak (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver nanoparticle (2)
- Silver-glass-metallization-paste (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Sinter additive (2)
- Sintering additives (2)
- Sintern (2)
- Size distribution (2)
- Slow crack growth (2)
- Soda-lime-silica glass (2)
- Solar sintering (2)
- Sorption (2)
- Space (2)
- Spannungs-Dehnungs-Verhalten (2)
- Spannungsriss (2)
- Spring constant (2)
- Stainless steel (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Starch (2)
- Starch nanoparticle (2)
- Steels (2)
- Storage (2)
- Strength (2)
- Stress corrosion cracking (2)
- Structural Health Monitoring (SHM) (2)
- Structural steel (2)
- Struktur (2)
- Sulphidation (2)
- Superalloy single crystals (2)
- Superconducting magnet (2)
- Supercritical CO2 (2)
- Surface Energy (2)
- Surface nucleation (2)
- Surface treatments (2)
- Symmetric dwell periods (2)
- Synchrotron Tomography (2)
- Synchrotronstrahlung (2)
- Synthetic air (2)
- Temperaturschwankungen (2)
- Tensile Properties (2)
- Tensile Test Ontology (2)
- Tensile properties (2)
- Thermal Spray (2)
- Thermal energy storage (2)
- Thermoanalyse (2)
- Thermodynamics (2)
- Thermoelectric (2)
- Thermoelectric oxide (2)
- Thermoelectric oxides (2)
- Thermoelectric properties (2)
- Thermographie (2)
- Thermography (2)
- Thermogravimetry (2)
- Thermomechanik (2)
- Thermoplastic (2)
- Thermoset polymers (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Topografie (2)
- Topographie (2)
- Toughness (2)
- Transmission electron microscope (TEM) (2)
- Transmissionselektronenmikroskopie (2)
- Transparent ceramics (2)
- Tribologie (2)
- Two Photon Polymerization (2)
- Under cyclic loading (2)
- Utilization, and storage (CCUS) technology (2)
- Vickers hardness (2)
- Viscous sintering (2)
- Volume specific surface area (2)
- Wall thickness (2)
- Wandler (2)
- Weibull Distribution (2)
- Weibull distribution (2)
- Werkstoffprüfung (2)
- Wetting (2)
- Wind turbine (2)
- Wood protection (2)
- X-Ray Diffraction (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- X-ray laminography (2)
- XANES (2)
- Zero-g (2)
- Zugeigenschaften (2)
- corrosion (2)
- robotische Glasschmelzanlage (2)
- Öffentliche Sicherheit (2)
- 12%Cr steel (1)
- 150 Years (1)
- 2PP (1)
- 316L stainless steel (1)
- 3D REM (1)
- 3D Reconstruction (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D imaging (1)
- 3D materialography (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 5G (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AFM (1)
- AFM based test methods (1)
- ATZ (1)
- Abgasturbolader Heißteile (1)
- Abrasion (1)
- Abwasser (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Acid-leaching (1)
- Acids (1)
- Active thermography (1)
- Additive manufactured Ni-base superalloys (1)
- Adiabatic shear bands (1)
- Adolf Martens (1)
- Advanced high strength steels (1)
- Advanced manufacturing (1)
- Advanced wastewater treatment (1)
- Aerospace (1)
- Age hardening (1)
- Aggressive environement (1)
- Aggressive environments (1)
- Aggressive gases (1)
- Aging mechanisms (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alkali-activated materials (1)
- Allgemeine Grundlagen (1)
- Alloy (1)
- Alloy 2818A (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alpha-tricalcium phosphate (1)
- Alumina coatings (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminiumlegierung (1)
- Aluminum Alloy Aging (1)
- Amorphization (1)
- Amorphous silica (1)
- Analyse (1)
- Analytical scanning electron microscopy (1)
- Analytical services (1)
- Analytik (1)
- Angle measurement (1)
- Anhydrite (1)
- Anticorrosion (1)
- Anwendungen (1)
- Approximant (1)
- Aquifer fluid (1)
- Artefact (1)
- Artificial weathering (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atomic packing factor (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Atomization (1)
- Aufbau von Festkörpern (1)
- Aussonderugnsrate (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic cast iron (1)
- Austenitic steel (1)
- Austenitischer Stahl (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automatische Finite Element Simulation (1)
- BCS (1)
- BET (1)
- BTEX (1)
- BTS (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Beanspruchung (1)
- Behmite (1)
- Berstdruck (1)
- Bilanzierung (1)
- Bimodal distribution (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactive (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Bioceramic (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Bioresorbable (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Blended learning (1)
- Blähen (1)
- Boden (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Breakdown strength (1)
- Brittle / ductile fracture behavior (1)
- Brown-rot fungi (1)
- Bruch (1)
- Bruchflächenanalyse (1)
- Bruchflächenauswertung (1)
- Bubble formation (1)
- Bundesoberbehörden (1)
- Burst (1)
- Burst test (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CALPHAD databases analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CMSX4 (1)
- CO2 Corrosion (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 separation membranes (1)
- CO2-Speicherung (1)
- CO2-corrosion (1)
- Cabon capture and storage (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calculated intrinsic fracture toughness (1)
- Calibration (1)
- Cantor alloy (1)
- Carbide phase NbC (1)
- Carbidic austempered ductile iron (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fibers (1)
- Carbon Fibre (1)
- Carbon capture, utilization and storage technology (1)
- Carbon fibre-reinforced-plastics (1)
- Carbon nanotubes (1)
- Casing (1)
- Catalogue of services (1)
- Cavitation (1)
- Ccs (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement-based materials (1)
- Centrifugal casting (1)
- Centrifugal compressor wheel (1)
- Ceramic multilayer (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramic springs (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chalcogenides (1)
- Characterisation (1)
- Charpy test (1)
- Chemically Complex Alloy (1)
- Chemically complex alloys (1)
- Chemische Analyse (1)
- Chemometrics (1)
- Chemometrie (1)
- Chromatography (1)
- Chromia (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-axial monitoring (1)
- Co-firing (1)
- Co-segregation (1)
- Co-firings (1)
- Co2-Storage (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Complex concentrated alloy (CCA) (1)
- Complex loading (1)
- Component assessment (1)
- Composite pressure vessels (1)
- Composite recycling (1)
- Composite structures (1)
- Composite testing (1)
- Compositionally complex alloy (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Coniophora puteana (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Contamination (1)
- Cooling rate (1)
- Cooling simulations (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion costs (1)
- Corrosion mechanism (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Covid-19 (1)
- Cow stress (1)
- Coûts de la corrosion (1)
- Cr2O3 (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Critical energy release rate (1)
- Crop protection formulations (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB geometry (1)
- DED-L (1)
- DIN (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage evolution (1)
- Damage mechanisms (1)
- Data Exchange (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data fusion (1)
- Data infrastructures (1)
- Data linking (1)
- Data processing (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Datenfusion (1)
- Datenmanagement (1)
- Datenökosystem (1)
- Debinding (1)
- Debonding (1)
- Deep learning (1)
- Defect detection (1)
- Defect population (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation behavior (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Demonstrators (1)
- Dense phase (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Dentine (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Die casting (1)
- Dielectric Spectroscopy (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffusivity (1)
- Digital representation (1)
- Digital representations (1)
- Digital workflows (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Dislocation avalanches (1)
- Dislocation substructure (1)
- Disordered assemblies (1)
- Disorientation (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Diversity (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Driving physical mechanism (1)
- Droplet (1)
- Druckgasspeicher (1)
- Dry preparation (1)
- Drywood termite (1)
- Dual-energy (1)
- Durchschlagfestigkeit (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- Dynamic mechanical analysis (1)
- Dynamic recrystallization (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EC4SafeNano (1)
- EFTEM (1)
- EIS (1)
- EN AW 2618A a (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Eigenschaften (1)
- Eigenspannung (1)
- Elastic energy (1)
- Elastic properties (1)
- Electric conductivity (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical deposition (1)
- Electrochemical dressing (1)
- Electrochemical impedance spectroscopy (1)
- Electromicroscopy (1)
- Electron Microscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron beam-induced charging (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- Electropolishing (1)
- Elektronisches Laborbuch (ELN) (1)
- Elektrotechnische Grundlagen (1)
- Enamel (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Endurance Limit (1)
- Energiedisersive Röntgenspektroskopie (1)
- Energiespeicherung (1)
- Energiewende (1)
- Energy harvesting (1)
- Energy transition (1)
- Entwicklung (1)
- Environment (1)
- Epitaxial films (1)
- Epoxidharz (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Ermüdungsriss (1)
- Etching (1)
- European Centre (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosionsschutz (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR Data (1)
- FAIR research data management (1)
- FCH JU (1)
- FIB Tomography (1)
- FNCT (1)
- FSDC (1)
- Fabrication (1)
- Fabrication method (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Failure test (1)
- Faser (1)
- Faser-Kunststoff-Verbund (1)
- Faseroptik (1)
- Faserverstärkte Kunstoffe (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue Testing (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stages (1)
- Fatigue fracture (1)
- Fatigue of sandwich structures (1)
- Fatigue striations (1)
- Fe-Mn steels (1)
- Federkonstante (1)
- Feldspar (1)
- Fem (1)
- Femtosecond laser (1)
- Ferritic Alloys (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fertigungsprozess (1)
- Fertigungstechnologie (1)
- Festigkeit (1)
- Fiber (1)
- Fiber reinforced polymers (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Film depositition (1)
- Filters (1)
- Fine Powder (1)
- Finite element method (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- First year students (1)
- Flipped classroom (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Focused Ion Beam (1)
- Focussed ion beam growth (1)
- Foliengießen (1)
- Force-distance diagram (1)
- Formerkennung (1)
- Four-point bending test (1)
- Fourier series (1)
- Fourier transform infrared spectroscopy (1)
- Fracture Mechanics (1)
- Fracture behavior (1)
- Fracture surfaces (1)
- Fragility (1)
- Freeze Drying (1)
- Freeze casting (1)
- Fresnoit (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (FNCT) (1)
- Full notch creep test (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- Functional fatigue (1)
- Fused Filament Fabrication (1)
- GC-MS (1)
- GMR (1)
- GMR sensors (1)
- Gas flow assisted powder deposition (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasdetektion (1)
- Gasgehalt (1)
- Gasturbinen (1)
- Gefüge (1)
- Gefüge (Werkstoffkunde) (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- Gefügeuntersuchung (1)
- Gefügte Nickelbasislegierungen (1)
- General Aviation (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- Geometrical factors (1)
- Geopolymers (1)
- Gitterfehlpassung (1)
- Glas fibre reinforced polymer (1)
- Glasfaserverstärkter Kunststoff (1)
- Glasmatrixkomposit (1)
- Glass Ceramic (1)
- Glass Fibres (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass fibre reinforced plastics (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Glasspeicher (1)
- Gleichgewicht (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Gold nanoparticle synthesis (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granulometrie (1)
- Graphic design (1)
- Graphite (1)
- Grenzflächenenergie (1)
- Growth kinetics (1)
- Growth rate (1)
- Grundlagen des Maschinenbaus (1)
- Grünfolieneigenschaften (1)
- Gypsum (1)
- HCF (1)
- HDPE Soprption (1)
- HDPE Sorption (1)
- HV-Insulation (1)
- Hardness test (1)
- Hartbearbeitung (1)
- Hausner ratio (1)
- Heat Treatment (1)
- Heat Treatments (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Heißgasextraktion (1)
- Heißgaskorrosion (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High - temperature corrosion (1)
- High Voltage Insulation (1)
- High alloyed steels (1)
- High cycle fatigue (1)
- High density polyethylene (1)
- High entropy superalloys (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (PE-HD) (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Hochentropielegierung (1)
- Hochentropielegierungen (1)
- Hochleistungskeramik (1)
- Hochspannungsprüfung (1)
- Hochtemperaturbrennstoffzelle (1)
- Hochtemperaturermüdung (1)
- Homogenization (1)
- Honing (1)
- Honing Stone (1)
- Horizon 2020 (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hybrid Manufacturing (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen permeability (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- Hyper-arid (1)
- IASCC (1)
- IN738LC (1)
- IR spectroscopy (1)
- Imaging (1)
- Impact damage (1)
- Impact wear (1)
- Implant failures (1)
- Implants (1)
- In situ diffraction (1)
- In situ thermal-annealing experiment (1)
- In-Situ Testing (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-situ tomography (1)
- In-vivo (1)
- In718 (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 686 coating (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Industrial and Manufacturing Engineering (1)
- Informationstechnische Grundlagen (1)
- Infrared nano AFM (1)
- Initial attachment (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interlaboratory comparability (1)
- Intermediate scale (1)
- Intermetallic (1)
- Intermetallische FeAl-Legierungen (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperability (1)
- Intrinsic stress (1)
- Invar (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Ion beam erosion Sectioning (1)
- Iron meteorite (1)
- Iron oxide (1)
- Irradiation (1)
- Irregular topography (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kalzinierung (1)
- Kennwertermittlung (1)
- Keramische Folien (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Klebung (1)
- Knowledge Graphs (1)
- Knowledge graph (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Komponentenprüfung (1)
- Kreislaufwirtschaft (1)
- Kriechermüdung (1)
- Kriechversuche (1)
- Kristallisation (1)
- Kristallorientierung (1)
- Kristallsystem (1)
- Kunststoffe (1)
- Kupfer (1)
- Kurzfaser-verstärkte Thermoplaste (1)
- Kurzzeitfestigkeit (1)
- L-PBF 316L (1)
- LIBS (1)
- LMD (1)
- LSD print (1)
- LTCC multilayer (1)
- Laboratory X-ray diffraction (1)
- Laminographie (1)
- Langzeitstabilität (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Scanning Microscopy (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser beam melting (LBM) (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laser light scattering (1)
- Laser powder-based directed energy deposition (1)
- Laser-Pulverbettschmelzen (1)
- Laser-induced slip casting (1)
- Laserbearbeitung (1)
- Laserscanningmikroskopie (LSM) (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Lattices (1)
- Laves phase (1)
- Layer depostion (1)
- Layer system (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Lebensdauervorhersage (1)
- Lecture films (1)
- Lecture videos (1)
- Legierung mit komplexer Zusammensetzung (1)
- Lehrfilm (1)
- Lehrfilmformate (1)
- Life cycle (1)
- Lifetime prediction (1)
- Light curing (1)
- Lightweighting (1)
- Limestone Filler (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Lithium-ion batteries (1)
- Lithography-based technologies (1)
- Local landscape evolution (1)
- Localized plasmons (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Low-loading (1)
- Lösungsmittel (1)
- Lötverbindung (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic domains (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetische Domänen (1)
- Magnetoelastic effect (1)
- Magnetoelastischer Effekt (1)
- Magnetomechanical effect (1)
- Manufacturing (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Master curve (1)
- Masterschädigungslinie (1)
- Mat-o-lab (1)
- Material characterization (1)
- Material defects (1)
- Material failure (1)
- Material modeling (1)
- Material oxidation (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialkreislauf (1)
- Materialmodell (1)
- Materialprüfung (1)
- Materials Chemistry (1)
- Materials Science (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Materialwissenschaft (1)
- Mathematisch-naturwissenschaftliche Grundlagen (1)
- Matrix (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical Behavior (1)
- Mechanical Properties (1)
- Mechanical and thermal testing (1)
- Mechanical anisotropy (1)
- Mechanical deformation (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Medium entopy alloy (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Medium-entropy alloy (1)
- Mehrachsige Verformung (1)
- Mehrskalenmodell (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metal powder characterization (1)
- Metall (1)
- Metallic Glass (1)
- Metallic components (1)
- Metallic materials (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metals and Alloys (1)
- Metformin (1)
- Methodology (1)
- Metrologie (1)
- Metrology (1)
- Micro computed tomography (1)
- Microbiologically influenced corrosion (1)
- Micromanipulation (1)
- Microplastic stress (1)
- Microsegregation (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural orientation (1)
- Microstructure Analysis (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure modification (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrogravitation (1)
- Mikrostrukturuntersuchung (1)
- Milling (1)
- Mindedestberstdruck (1)
- Mini-UAV (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Missing acknowledgment (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Mn3O4 (1)
- Model (1)
- Model alloy (1)
- Modell (1)
- Moisture (1)
- Molecular Dynamics (1)
- Molten salt (1)
- Monte-Carlo-Analysis (1)
- Moon (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial stress state (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NFDI-MatWerk (1)
- NGS (1)
- NMR (1)
- Nahinfrarotspektroskopie (1)
- Nano CRM (1)
- Nano material (1)
- Nano metal fluorides (1)
- Nano-assemblies (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-composite (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nano-safety (1)
- Nano-scratch test (1)
- NanoCAM (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterial screening (1)
- Nanoparticle structure (1)
- Nanoparticle synthesis (1)
- Nanopartikel (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Negative charged microparticle (1)
- Net zero (1)
- Networking (1)
- New standards (1)
- Ni-Mn-Ga (1)
- NiMaGa (1)
- NiTi (1)
- Nickel based coatings (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Nitride (1)
- Non-Destructive Testing (1)
- Non-desired foaming (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Nondestructive testing (1)
- Notch (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Number density (1)
- Numerische Simulation (1)
- Nydrogen melting (1)
- OECD TG (1)
- Oberflächenaktive wässrige Medien (1)
- Oberflächenkeimbildung (1)
- Online (1)
- Online Process Monitoring (1)
- Online quality control (1)
- Online teaching (1)
- Ontologies (1)
- Ooxidation (1)
- Optic (1)
- Optical and Magnetic Materials (1)
- Optical backscatter reflectometry (1)
- Optical centrifugation (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Optical fibre (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orientation-dependent microstructure (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxide scale (1)
- Oxides (1)
- Oxygen evolution reaction (1)
- P92 steels (1)
- PA6.6 (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PPA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Particle Size Distribution (1)
- Particle size determination (1)
- Particle-bed binder jetting (1)
- Partikelgröße (1)
- Passive components and circuits (1)
- Patent (1)
- Peem (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photocatalysis (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Physical properties (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Phytolith (1)
- Pitting corrosion (1)
- Planetary surface (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Platinum-group-metals (1)
- Plattform Material Digital (PMD) (1)
- Pole figures (1)
- Polymer Matrix Composite (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymerwissenschaften (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Pore (1)
- Porosification (1)
- Porous materials (1)
- Portfolio (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder deposition (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Power factor (1)
- Power law (1)
- Power plant (1)
- Power-to-Gas (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- ProMoAM (1)
- Process (1)
- Process Monitoring (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Proficiency test (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Property simulation (1)
- Protection (1)
- Prozessmonitoring (1)
- Pseudosymmetry (1)
- Pull-out (1)
- Pull-out composite materials (1)
- Pultruded fiber rods (1)
- Pycnometry (1)
- Quality assurance (1)
- Quantitative Precipitation Analysis (1)
- Radii distribution (1)
- Radon transform (1)
- Rafting (1)
- Reaction Sintering (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference Material (1)
- Reference material BCR-425 (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Refractory alloy (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Refractory superalloys (1)
- Regelwerke (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Relaxation metallic glasses (1)
- Relaxation tests (1)
- Relaxationsphänomene (1)
- Reliability (1)
- Reliable characterization (1)
- Renewable ernergy (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Research Data Management (1)
- Residual strains (1)
- Residual stress analysis (1)
- Resistance (1)
- Resistance spot welding (1)
- Resistance stress (1)
- Resonance testing (1)
- Restberstfestigkeit (1)
- Rheology (1)
- Rhodonia placenta (1)
- Risikoanalyse (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissfortschritt (1)
- Rissheilung (1)
- Rissverlauf (1)
- Robot-assisted galss melting (1)
- Rohrprobekörper (1)
- Rotorblatt (1)
- Rotorblätter (1)
- SDC (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEN-Probe (1)
- SHM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Sailplane Development Panel (1)
- Sall-angle scattering (1)
- Salt melt (1)
- Salzschmelzen (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich structures (1)
- Sandwichstruktur (1)
- Scaffold (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scarf joint (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- Scavenging effect of iron (1)
- Schadenskunde (1)
- Schalenprüfstand (1)
- Schlickerdeposition (1)
- SchwarzP cells (1)
- Schwerelosigkeit (1)
- Schwingbrüche (1)
- Scratches (1)
- Screen printing (1)
- Screening method (1)
- Segregation (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantische Daten (1)
- Semiconductor materials (1)
- Sensor (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Sewage treatment plant (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silber (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silicon release (1)
- Silikatkeramik (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Simulationsgestützte Gießkonzepte (1)
- Single crystal Ni-Base superalloys (1)
- Single crystal superalloys (1)
- Single fiber pull-out test (1)
- Single-crystal (1)
- Sinter retardation (1)
- Sintering additive (1)
- Sintering atmosphere (1)
- Sintermechanismen (1)
- Sintertemperatur (1)
- Sinterung (1)
- Sinus floor augmentation (1)
- Size (1)
- Size and size distribution (1)
- Size effect (1)
- Sliding simulation (1)
- Slip localization (1)
- Slip-rolling (1)
- Slow Crack Growth (SCG) (1)
- Slurry optimization (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle Scattering (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Softening temperature (1)
- Soil (1)
- Soil sample (1)
- Solar panels (1)
- Solid solution strengthening (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solidification (1)
- Space exploration (1)
- Spar cap design (1)
- Spark plasma sintering (1)
- Specific surface (1)
- Specimen geometry (1)
- Spezifische Oberfläche (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Split-vacancy defect complexes (1)
- Spring constant (1)
- Stable crack growth (1)
- Standardisation (1)
- Stanzen (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strain rate dependence (1)
- Stratégies deprévention (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Streuung (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural health monitoring (SHM) (1)
- Structure (1)
- Structured Data (1)
- Structured heating (1)
- Subcritical crack growth (1)
- Subsurface defects (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Superlegierungen (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface Nucleation (1)
- Surface elasticity (1)
- Surface modification (1)
- Surface roughness (1)
- Surface stress (1)
- Surface-induced Melting (1)
- Swept wavelength interferometry (1)
- Swept wavelength interferometry (SWI) (1)
- Symbolik (1)
- Synchrotron (1)
- Synchrotron CT (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiation (1)
- Synchrotron radiations (1)
- Synchrotron tomography (1)
- Synthesis (1)
- Systematische Schadensanalysen, Prozeduren (1)
- T1 precipitate (1)
- TAHYA (1)
- TED (1)
- TIG-welding (1)
- TMF experiments (1)
- Technical Ceramics (1)
- Technische Keramik (1)
- Temperature dependence (1)
- Temperature driven process (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Tensile tests (1)
- Termites (1)
- Test Improvement (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Texturation (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal degradation (1)
- Thermal desorption mass spectrometry (1)
- Thermal stress (1)
- Thermische Analyse (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical loading (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-optical measurement (1)
- Thermoanalysis (1)
- Thermoanalytical Methods (1)
- Thermobimetal (1)
- Thermodynamic analysis (1)
- Thermodynamic stability (1)
- Thermodynamische Stabilität (1)
- Thermoelectric generator (1)
- Thermoelectric generator design (1)
- Thermoelektrika (1)
- Thermoelektrischer Generator (1)
- Thermogravimetric analysis (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Eigenschaften (1)
- Thermomechanische Ermüdung (1)
- Thermophysikalische Eigenschaften (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thesaurus (1)
- Thickening (1)
- Thin films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Time-offlight Diffraction (TOFD) (1)
- Tomography (1)
- Tools (1)
- Tooth wear (1)
- Transducers (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Two-photon-polymerization (1)
- Ultraschall (1)
- Ultrasonic Testing (1)
- Ultrasonic assited machining (1)
- Umgebungsbedingter Spannungsriss (1)
- Ungleichgewicht (1)
- Unidirectional composites (1)
- Unlegierter Baustahl (1)
- VCSEL (1)
- VM12 SHC (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Verbundwerkstoff (1)
- Verbundwerkstoffe (1)
- Vernetzung (1)
- Versetzungsstrukturen (1)
- Very high cycle fatigue (1)
- Vickers Hardness (1)
- Virtueller Materialdatenraum (1)
- Viscoelastic model (1)
- Viscose sintering (1)
- Viskoplastisch (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume Fraction (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Wasserstoff (1)
- Wasserstofferzeugung (1)
- Waste water (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Water-based (1)
- Welding processing influences (1)
- Werkstoffauswahl (1)
- Werkstoffdaten (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Wet chemical etching (1)
- Wet dispersion (1)
- Wind turbine blade shell structures (1)
- Windkraft (1)
- Withstand voltage tests (1)
- Work of adhesion (1)
- Workshop (1)
- Wärmespeicher (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray imaging (1)
- X-ray refractography (1)
- X-ray scattering (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRM (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- ZfP (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- ZnO (1)
- Zug-Druck-Schubprüfung (1)
- Zugversuchsontologie (1)
- Zyklische Belastung (1)
- Zyklische R-Kurve (1)
- alumina (1)
- arbidic austempered ductile iron (1)
- arbon capture (1)
- ausfgallfreie Lastwechsel (1)
- battery aging mechanism (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- coarsening (1)
- condensate (1)
- current collector corrosion (1)
- dental (1)
- depth profiles (1)
- dispersion (1)
- electrochemical characterization (1)
- electron microscopy (1)
- hardness (1)
- high entropy alloys (1)
- high pressure (1)
- hydrogen storage (1)
- impurities (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- laser cladding (1)
- microstructural changes (1)
- microstructure analysis (1)
- multi scale testing (1)
- negative crystal growth (1)
- oxidation (1)
- particle size determination (1)
- phosphate glasses (1)
- pitting corrosion (1)
- sample preparation (1)
- scanning electron microscopy (1)
- selective laser melting (1)
- statistische Auswertung (1)
- sulfidation (1)
- thermomechanische Beanspruchung (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- water speciation (1)
- zertifizierte Referenzmaterialien (1)
- Überblick (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (1095)
- 5.1 Mikrostruktur Design und Degradation (338)
- 5.2 Metallische Hochtemperaturwerkstoffe (262)
- 5.4 Multimateriale Fertigungsprozesse (212)
- 5.3 Polymere Verbundwerkstoffe (131)
- 5.6 Glas (128)
- 5.5 Materialmodellierung (115)
- 8 Zerstörungsfreie Prüfung (105)
- 9 Komponentensicherheit (96)
- 7 Bauwerkssicherheit (91)
Paper des Monats
- ja (11)
Modern dry pressing of ceramic powders using spray‐dried granulates cannot avoid the occurrence of defects related to persisting inter‐ and intra‐granulate interstitial voids. These constitute the parent defect size population limiting the application of polycrystalline ceramics in high‐stress conditions. The mitigation of such defects could widen the range of application in technical and biomedical engineering, reduce the safety range for design, and extend the lifetime of components. Herein, the Weibull size‐effect on strength in size‐partitioned Yttria‐stabilized zirconias (YSZ) feedstocks is used to explore the viability of changing the density distribution of granulate sizes as an effective strategy to obtain a denser particle packing that could reduce the size distribution of strength‐limiting pressing defects. In a direct assessment of critical defect size using multiscale strength testing with a dataset of ≈1300 values, the success of such an approach in increasing the strength reliability for small volume components is demonstrated, along with its ultimate failure in altering the defect size distribution in sintered YSZ ceramics across several length scales. Finally, it is shown that granule morphology (spherical or dimpled) fails to affect the defect density and size distribution in YSZ ceramics.
Compared to mechanisms like solid solution strengthening, the stacking fault energy (SFE) should be considered as a further factor that influences the material properties. The effect of SFE of alloys or individual elements on strength and resistance can vary considerably. In the high-temperature regime above 700 ◦C, there are still significant gaps in the knowledge about the effect of the SFE on the mechanical properties of single-phase alloys. The effect of SFE on creep resistance of two face-entered cubic equiatomic medium and high entropy alloys, CrCoNi and CrMnFeCoNi, respectively, is evaluated to fill parts of these gaps. Using the Bridgman solidification process, the alloys were produced as single crystals and crept under vacuum at 700 ◦C up to 1100 ◦C. This work shows a significant impact of the lower SFE of CrCoNi on the creep behavior compared to the results of previous investigations of CrMnFeCoNi. The creep resistance of the former is higher over the complete temperature range. At very high temperatures, the strengthening effect of the stacking faults is significantly present. The formation of tetragonal stacking faults and extended dislocation nodes can be identified as the reason for this effect.
Laser Powder Bed Fusion (PBF-LB/M) of AISI 316L stainless steel has gained popularity due to its exceptional capacity to produce complex geometries and hierarchical microstructures, which can increase the yield strength while maintaining good ductility. Nevertheless, owing to high thermal gradients encountered during the process, the as printed 316L stainless steel often exhibit microstructural heterogeneities and residual stresses, which can limit its performance in demanding environments. Hence, employing heat treatments which balance the reduction of residual stresses while retaining improved static strength may be beneficial in various scenarios and applications. This study investigates the impact of post-processing heat treatments on the microstructure of 316L stainless steel manufactured via PBF-LB/M, along with its correlation with micro-hardness properties. To this end, 6 different heat treatments, i.e., 450 °C for 4h, 700 °C for 1h, 700 °C for 3h, 800 °C for 1h, 800 °C for 3h, and 900 °C for 1h, were applied to different specimens and Vickers hardness measurements (HV1) were performed in all states. At 800 °C, although the cellular structure appears to be retained, there is an observable increase in cellular size. However, while treatments exceeding 900 °C indicate no significant grain growth compared to other conditions, the cellular structure is entirely dissolved, which leads to a reduced Vickers hardness. The effect of the heat treatments on other microstructural features such as grain size and morphology, melt pool boundaries (MPB), crystallographic texture, chemical segregation, dispersoids and phase stability are also discussed in the present work
The general term additive manufacturing (AM) encompasses processes that enable the production of parts in a single manufacturing step. Among these, laser powder bed fusion (PBF-LB) is one of the most commonly used to produce metal components. In essence, a laser locally melts powder particles in a powder bed layer-by-layer to incrementally build a part. As a result, this process offers immense manufacturing flexibility and superior geometric design capabilities compared to conventional processes. However, these advantages come at a cost: the localized processing inevitably induces large thermal gradients, resulting in the formation of large thermal stress during manufacturing. In the best case, residual stress remains in the final parts produced as a footprint of this thermal stress. Since residual stress is well known to exacerbate the structural integrity of components, their assessment is important in two respects. First, to optimize process parameter to minimize residual stress magnitudes. Second, to study their effect on the structural integrity of components (e.g., validation of numerical models). Therefore, a reliable experimental assessment of residual stress is an important factor for the successful application of PBF-LB. In this context, diffraction-based techniques allow the non-destructive characterization of the residual stress. In essence, lattice strain is calculated from interplanar distances by application of Braggs law. From the known lattice strain, macroscopic stress can be determined using Hooke’s law. To allow the accurate assessment of the residual stress distribution by such methods, a couple of challenges in regard of the characteristic PBF-LB microstructures need to be overcome.
This presentation highlights some of the challenges regarding the accurate assessment of residual stress in PBF-LB on the example of the Nickel-based alloy Inconel 718. The most significant influencing factors are the use of the correct diffraction elastic constants, the choice of the stress-free reference, and the consideration of the crystallographic texture. Further, it is shown that laboratory X-ray diffraction methods characterizing residual stress at the surface are biased by the inherent surface roughness. Overall, the impact of the characteristic microstructure is most significant for the selection of the correct diffraction elastic constants. In view of the localized melting and solidification, no significant gradients of the stress-free reference are observed, even though the cell-like solidification sub-structure is known to be heterogeneous on the micro-scale.
The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.
Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer-wise additive manufacturing process that provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of a diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative lattice plane suitable for residual stress analysis. In this contribution, the selection of a suitable lattice plane family for residual stress analysis is explored. Furthermore, the determination of an appropriate set of diffraction and single-crystal elastic constants depending on the underlying microstructure is addressed.
In-situ loading experiments have been performed at the Swiss Spallation Neutron Source with the main scope to study the deformation behaviour of laser powder bed fused Inconel 718. Cylindrical tensile bars have been subjected to an increasing mechanical load. At pre-defined steps, neutron diffraction data has been collected. After reaching the yield limit, unloads have been performed to study the accumulation of intergranular strain among various lattice plane families.
The manufacture of sintered glasses and glass-ceramics, glass matrix composites, and glass-bounded ceramics or pastes is often affected by un-expected gas bubble formation also named foaming. Against this background, in this presentation the main aspects and possible reasons of foaming are shown for completely different glass powders: a barium silicate glass powders used as SOFC sealants, and bioactive glass powders using different powder milling procedures.
Sintering and foaming were measured by means of heating microscopy backed up by XRD, differential thermal analysis (DTA), vacuum hot extraction (VHE), optical and electron microscopy, and infrared spectroscopy, and time-of-flight secondary ion mass spectrometry (ToF-SIMS).
Different densification was reached followed by significant foaming starting partly immediately, partly at higher temperature. Foaming increased significantly as milling progressed. For moderately milled glass powders, subsequent storage in air could also promote foaming. Although the milling atmosphere significantly affects the foaming of uniaxially pressed powder compacts sintered in air.
VHE studies show that foaming is driven by carbon gases and carbonates were detected by Infrared spectroscopy to provide the major foaming source. Carbonates could be detected even after heating to 750 °C, which hints on a thermally very stable species or mechanical trapping or encapsulating of CO2. Otherwise, dark gray compact colors for milling in isopropanol indicate the presence of residual carbon as well. Its significant contribution to foaming, however, could not be proved and might be limited by the diffusivity of oxygen needed for carbon oxidation to carbon gas.
Up to now, oriented surface crystallization phenomena are discussed controversially, and related studies are restricted to few glasses. For silicate glasses we found a good correlation between the calculated surface energy of crystal faces and oriented surface nucleation. Surface energies were estimated assuming that crystal surfaces resemble minimum energy crack paths along the given crystal plane. This concept was successfully applied at the Institute of Physics of Rennes in calculating fracture surface energies of glasses. Several oriented nucleation phenomena can be herby explained assuming that high energy crystal surfaces tend to be wetted by the melt. This would minimize the total interfacial energy of the nucleus. Furthermore, we will discuss the evolution of the microstructure and its effect on the preferred crystal orientation.
Bislang wird das Phänomen der orientierten Oberflächenkristallisation kontrovers diskutiert und entsprechende Studien beschränken sich auf nur wenige Gläser. Für Silikatgläser haben wir eine gute Korrelation zwischen der berechneten Oberflächenenergie von Kristallflächen und der orientierten Oberflächenkeimbildung gefunden. Die Oberflächenenergien wurden unter der Annahme abgeschätzt, dass die Kristalloberflächen bei der Keimbildung den Kristallebenen mit minimaler Energie entsprechen, denen ein Riss beim Bruch folgt. Dieses Konzept wurde am Institut für Physik in Rennes erfolgreich bei der Berechnung der Bruchflächenenergien von Gläsern angewandt. Mehrere orientierte Keimbildungsphänomene lassen sich dadurch erklären, dass man annimmt, dass Kristalloberflächen mit hoher Energie dazu neigen, von der Schmelze benetzt zu werden. Dies minimiert die gesamte Grenzflächenenergie des Keims. Darüber hinaus werden wir die Entwicklung der Mikrostruktur beim weiteren Kristallwachstum und ihre Auswirkungen auf die bevorzugte Kristallorientierung diskutieren.
Self-healing polymers have been developed to improve durability and reduce costs associated with maintenance during service. The addition of thermoplastics to thermosets to produce mendable polymers appears as a promising selfhealing technique. In this study, poly (ethylene-co-methacrylic acid) (EMAA) was added to epoxy resin and the effects of EMAA addition on epoxy properties were evaluated. Specimens with two different contents of thermoplastic and particles sizes were manufactured. A two-level full factorial experimental design was used to evaluate the effect of particle size and particle content on properties of epoxy modified with addition of EMAA. Tensile tests and dynamic mechanical analysis (DMA) were used and the evaluated responses were tensile strength, modulus of elasticity, and glass transition temperature (Tg). X-ray computed tomography (XCT) was used to investigate particle size and concentration after manufacturing. It was found that the particle concentration has greater effects on stress–strain behavior of epoxy while Tg was not significantly affected by neither of the analyzed entrance variables.
Die Integration und Wiederverwendung von Wissen und Daten aus der Herstellung, Bearbeitung und Charakterisierung von Materialien wird im Zuge der digitalen Transformation in der Materialwissenschaft und Werkstofftechnologie in verschiedenen Projekten behandelt. Dabei liegt der Fokus auf der Interoperabilität von Daten und Anwendungen, die nach den FAIR-Prinzipien erstellt und veröffentlicht werden. Zur Umsetzung eines komplexen Datenmanagements und der Digitalisierung im Bereich der Materialwissenschaften gewinnen Ontologien zunehmend an Bedeutung. Sie ermöglichen sowohl menschenlesbare als auch maschinenverständliche und -interpretierbare Wissensrepräsentationen durch semantische Konzeptualisierungen.
Im Rahmen des Projektes Plattform MaterialDigital (PMD, materialdigital.de), welches in dieser Präsentation vorgestellt wird, werden Ontologien verschiedener Ebenen entwickelt (verbindende mid-level sowie Domänen-Ontologien). Die PMD-Kernontologie (PMD Core Ontology - PMDco) ist eine Ontologie der mittleren Ebene, die Verbindungen zwischen spezifischeren MSE-Anwendungsontologien und domänenneutralen Konzepten herstellt, die in bereits etablierten Ontologien höherer Ebenen (top-level Ontology) verwendet werden. Sie stellt somit einen umfassenden Satz von durch Konsensbildung in der Gemeinschaft (geteiltes Vokabular) entstanden Bausteinen grundlegender Konzepte aus der Materialwissenschaft und Werkstofftechnik (MSE) dar. In dieser Präsentation wird die PMDco adressiert.
Weiterhin wird eine auf die PMDco bezogene normenkonforme ontologische Repräsentation zur Speicherung und Weiterverarbeitung von Zugversuchsdaten – die Tensile Test Ontology (TTO) – präsentiert, die in enger Zusammenarbeit mit dem zugehörigen DIN-Standardisierungsgremium NA 062-01-42 AA erstellt wurde. Dies umfasst den Weg von der Entwicklung einer Ontologie nach Norm, der Konvertierung von Daten aus Standardtests in das interoperable RDF-Format bis hin zur Verbindung von Ontologie und Daten. Auf Grundlage der dabei entwickelten Struktur und Vorgehensweise können weitere Materialcharakterisierungsmethoden semantisch beschrieben werden, woraus sich in diesem Zusammenhang Kooperationsmöglichkeiten ergeben.
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
Advancements in bulk metallic glass thermoplastic forming unleash the potential to fabricate microscale metallic features with unparalleled precision and durability, i.e. microspine gripping structures for mobility platforms on planetary or in-space robots. Four designs of grippers were fabricated and rigorously tested. Coefficient of friction on four test surfaces were measured and compared to SiC paper and Velcro. The hardness and elasticity of the bulk metallic glasses make them a game-changer in the field, offering a superior alternative to conventional nonmetallic grippers.
An interlaboratory study, involving eigth international laboratories and coordinated by COMTES FHT (Czech Republic), was conducted to validate tensile measurements obtained using miniature specimens on additively manufactured (AM) components and artifacts. In addition to AM 316L stainless steel (316L SS), a wrought highstrength steel (34CrNiMo6V, equivalent to AISI 4340) was also used. Based on the results, a precision statement in accordance with ASTM E691 standard practice was developed, intended for inclusion in a proposed annex to the ASTM E8/E8M tension testing method. The primary outcomes of the study highlighted the agreement between yield and tensile strength measured from miniature and standard-sized tensile specimens. Furthermore, most tensile properties exhibited similar standard deviations, offering users insight into the efficacy of miniature specimen applications.
The present work addresses powder bed binder jetting additive manufacturing by selective magnesium phosphate cement activation. Despite the potential of this technology to aid the digitalization of the construction industry, the effect of processing parameters on the mechanical performance of printed materials has not yet been studied to generate a guideline for the further development of the technology. Statistical methodologies were used to screen the effect of four printing process parameters (printing speed, layer thickness, raster angle, and build direction on flexural and compressive strength). As the exploited technology works with constant fluid pressure, the physical interpretation of the effect of each factor can be considered taking into account the interactions between the binder materials in the powder bed. Analysis of variance (ANOVA) indicated that printing speed and layer thickness significantly affect mechanical performances. Furthermore, the layout of samples for the printing process is preferable to be parallel the printhead movement. An anisotropic behavior was observed, and the samples subjected to compressive forces parallel to the layer plane possessed lower strength values. This effect can be interpreted as a result of a weak area of low density in between layers, leading to a pronounced delamination under compression. Even though the strength of the printed material is not suitable for a structural concrete, it can be marginally improved by design of experiment and optimized for non-structural applications, such as for porous artificial stone. Design of experiment coupled with ANOVA methods can be used in the future to support the development of novel material mixtures, thus expanding the fields of application of this novel additive manufacturing technology.
A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO.
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.
Following the new paradigm of materials development, design, and optimization, digitalization is the main goal in materials sciences and engineering (MSE) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web technologies (SWT) are used since they allow for machine-actionable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD) aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific support in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are semantically represented on a prototypical basis which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this poster presentation illustrates demonstrators developed and deployed within the PMD project. Semantically anchored using the mid-level PMD Core Ontology (PMDco), they address data transformation leading to a novel data management which is based on semantic integrated data. The PMD data acquisition pipeline (DAP), which is fueled by traditional, diverse data formats, and a pipeline applying an electronic laboratory notebook (ELN) as data source are displayed. Additionally, the efficient combination of diverse datasets originating from different sources is demonstrated by the representation of a use case dealing with the well-known Orowan relation.
Electron Back Scatter Diffraction (EBSD) is a very versatile analytical technique allowing for the characterization of material structure. Historically, diffraction images (Kikuchi patterns) registered during EBSD analysis were solved using Hough/Radon transformation. The last decade brought several novel techniques of experimental pattern analysis, focusing entirely on image analysis routines such as pattern matching, or various variants of High-Resolution EBSD. However, all the above-mentioned techniques require prior knowledge of the material structure to perform orientation analysis. The recently presented algorithm employed in Crystallographic Analysis of Lattice Metric (CALM) software, effectively removes this limitation enabling a standard-less analytical approach in EBSD systems. At its core, the CALM technique couples accurate detection of the Kikuchi bands position, with a rigid construction of reciprocal lattice resulting from translational crystal symmetry. A unique characteristic of the methodology also gives an opportunity for application in the analysis of continuous lattice changes, for example tetragonality mapping. During mapping, however, the geometry of the gnomonic projection (represented by the projection center) is continuously altered decreasing overall algorithm efficiency. The work presents an analysis of the projection center in terms of precision and accuracy.
High‐temperature KCl‐induced corrosion of high Cr and Ni alloys investigated by in‐situ diffraction
(2024)
High‐temperature KCl‐induced corrosion in laboratory air was observed in situ utilizing X‐ray diffraction. High Cr‐containing model alloys (Fe‐13Cr, Fe‐18Cr‐12Ni, and Fe‐25Cr‐20Ni) were coated with KCl and exposed to dry air at 560°C. KCl‐free alloys were studied in the equivalent atmosphere as a reference. After exposure to KCl‐free environments, all alloys showed the formation of very thin oxide layers, indicating good corrosion resistance. In contrast, KCl‐bearing alloys showed distinct damage after exposure.
The characterization of really unknown phases typically uses 70 to 150 reflectors for lattice metric calculation. The determination of the lattice parameters follows with 4% accuracy. Including a Z correction up to 1% can be reached. The precision of the lattice parameters ratios (a:b:c) is, however, better than 0.1%.
Motivated by the aim of developing an additive manufacturing (AM) technology easily integrated in the process chains of the ceramic industry, the LSD-print technology was conceived as a slurry-based variation of binder jetting (BJ).
BJ and other powder bed technologies (such as powder bed fusion) are amongst the most successful AM techniques, especially for metals and polymers, thanks to their high productivity and scalability. The possibility to use commercially available feedstocks (in the form of powders or granules) makes BJ also attractive for ceramic materials. The application of these techniques to most advanced ceramics has however been difficult so far, because of the limitations in depositing homogeneous layers with fine, typically poorly flowable powders.
In this context, the "layerwise slurry deposition" (LSD) was proposed at TU Clausthal (Germany) as a slurry-based deposition of ceramic layers by means of a doctor blade. Combined with layer-by-layer laser sintering of the material, the LSD process was originally demonstrated for the rapid prototyping of silicate ceramics. Due to the difficulties in controlling the microstructure and the defect formation in laser-sintered technical ceramics, the LSD process was later combined with inkjet printing in the LSD-print technology, which has been further developed at BAM (Germany) in the past decade.
The LSD-print technology combines the high speed of inkjet printing, typical of BJ, with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. Due to the mechanical stability of the powder bed, the process can also be carried out with continuous layer deposition on a rotating platform, which further increases its productivity.
This presentation will delve into 10 years of research on the LSD-print of a wide variety of technical ceramics including alumina, silicon carbides and dental ceramics. The discussion highlights how a seemingly small process and feedstock modification (from powders to slurries) has great influence on the challenges and potential of this process, which are being addressed on its path to industrialization.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method enabling the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder. Not only very fine, submicron powders can be processed with low organics, but also the dense powder bed provides excellent support to the parts built. The LSD technology can be combined with binder jetting to develop the so-called “LSD-print” process. LSD-print combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to traditional processing.
The latest development of this technology shows that it is possible to print ceramic parts in a continuous process by depositing a layer onto a rotating platform, growing a powder bed following a spiral motion. The unique mechanical stability of the layers in LSD-print allows to grow a powder bed several centimeters thick without any lateral support. The continuous layer deposition allows to achieve a productivity more than 10X higher compared to the linear deposition, approaching a build volume of 1 liter/hour.
Fully automated and decentralized fused filament fabrication of ceramics for remote applications
(2024)
Manufacturing of ceramic components in remote (i.e., geographically isolated) settings poses significant challenges where access to conventional manufacturing facilities is limited or non-existent. Fused Filament Fabrication (FFF) enables the rapid manufacturing of ceramic components with complex geometries. Parts formed by FFF require subsequent debinding and sintering to reach full density. Debinding and sintering are typically executed in separate steps with different equipment, necessitating extensive human handling which hinders process automation and may be challenging for the operator in isolated environments. This poster presents an innovative approach: the integration of all process steps into a single, fully automated system, streamlining the process and minimizing human involvement. Our system combines a dual extrusion filament printer with a porous and heat-resistant ceramic print bed. The porous print bed enables mechanical interlocking of the first printed layers, ensuring adhesion and structural integrity during FFF. Ceramic parts are printed onto thin sacrificial rafts, which are built using an interface material with the same binder as the ceramic filament. After the print is completed, the heat-resistant print bed with all parts is transferred seamlessly with a carrier system into a high-temperature furnace for debinding and sintering. During sintering the sacrificial raft is disintegrated, allowing for unconstrained sintering of the ceramic parts and easy removal of the finished parts. In conclusion, our integrated approach enables significant advancements in the fabrication of complex ceramic components in remote environments with increased efficiency and minimal human handling.
The Laser-Induced Slip Casting is an additive manufacturing technology specifically developed for ceramic materials using water-based ceramic slurries. The process takes place layer-by-layer in a similar fashion as top-down vat photopolymerization, selectively consolidating each layer by means of a laser energy source positioned on the top. Contrary to vat photopolymerization, in which the consolidation is achieved by selectively cross-linking a ceramic-filled resin, LIS uses water-based slurries with a low amount of organic additives (typically < 5 wt%) as feedstocks.
In LIS, a green body is formed by local evaporation of water which causes the suspension to collapse forming a cast, following a mechanism similar to slip casting. Only a small content of organic additives is needed to effectively disperse the ceramic particles and to increase the green strength.
The technology is very versatile and can be applied to all ceramic systems that can be dispersed in water. One of the main advantages is that even dark materials such as silicon carbide can be processed without issues related to light scattering and absorption.
The presentation will discuss strengths and limitations of LIS compared to other AM technologies and will highlight the latest results for alumina and for silicon carbide ceramics.
The presentation will start with an overview of ceramic additive manufacturing (AM) technologies and will discuss the potential of AM in the field of bioceramics.
The presentation will then focus on two possible use cases of binder jetting technologies.
In the first example, standard powder-based binder jetting is used to manufacture a porous implant design for large scale bone defects. The related challenges in the process chain will be discussed, from powder synthesis to sintering and characterization of the printed part.
In the second example, the LSD-print slurry-based binder jetting technology is presented as a possibility to adapt powder-bed AM to produce dense ceramic parts. The use case will focus on an application in the field of dental ceramics, specifically for the manufacturing of patient individualized single tooth restorations (veneers, crowns) with a high throughput process chain.
Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
Additive manufacturing of metals – and in particular building with laser-based powder bed fusion – is highly flexible and allows high-resolution features and feedstock savings. Meanwhile, though space stations in low Earth orbit are established, a set of visits to the Moon have been performed, and humankind can send out rovers to explore Venus and Mars, none of these milestone missions is equipped with technology to manufacture functional metallic parts or tools in space. In order to advance space exploration to long-term missions beyond low Earth orbit, it will be crucial to develop and employ technology for in-space manufacturing (ISM) and in-situ resource utilisation (ISRU). To use the advantages of laser-based powder bed fusion in these endeavours, the challenge of powder handling in microgravity must be met. Here we present a device capable of building parts using metallic powders in microgravity. This was proven on several sounding rocket flights, on which occasions Zr-based metallic glass parts produced by additive manufacturing in space were built. The findings of this work demonstrate that building parts using powder feedstock, which is more compact to transport into space than wire, is possible in microgravity environments. This thus significantly advances ISRU and ISM and paves the way for future tests in prolonged microgravity settings.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as “electron beam-induced fragmentation” or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field B = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. B = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as ‘‘electron beam-induced fragmentation’’ or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field 𝐵 = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. 𝐵 = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
Es wird eine Studie zur Charakterisierung eines anisotropen Stahls vorgestellt, bei der Ultraschalluntersuchungen mit Mikrostrukturanalysen verbunden werden. Das Material weist hohe Festigkeit und Korrosionsbeständigkeit auf, zugleich ist mit anisotropen Eigenschaften die mechanischen und betrieblichen Eigenschaften beeinflussen zu rechnen. Vorläufige Ergebnisse lassen vermuten, dass weitere Untersuchungen notwendig sind, um die Fähigkeiten und Grenzen des Materials genau zu bestimmen. Es wird ein systematischer Ansatz mit Array- Prüfköpfen, Time-of-Flight Diffraction (TOFD) Technik und mikrostrukturellen Untersuchungen angewendet, um die Wechselwirkung zwischen Anisotropie und Mikrostruktur des Stahls zu analysieren. Ultraschallprüfungen mit der TOFD-Technik und in Tauchtechnik liefern Einblicke in das anisotrope Verhalten des Werkstoffes, einschließlich entsprechenden Kornorientierung, Dämpfung und Schallgeschwindigkeitsvariation. Diese Messungen führen in Verbindung mit mikrostrukturellen Analysen zu einem tieferen Verständnis des Materialverhaltens. Unser Hauptziel ist es, ein Framework zu erstellen, welches die Ultraschallantwort anisotroper Materialien mit ihren mikroskopischen Struktureigenschaften verbindet. Die vorgestellte Methodik ermöglicht eine zerstörungsfreie und zügige Bewertung der Materialintegrität, was besonders bei der Anwendung von Hochleistungsmaterialien relevant ist. Durch diesen integrativen Ansatz werden verschiedener Charakterisierungsmethoden kombiniert, um ein umfassenderes Materialverständnis zu erreichen.
Today’s industrial demands challenge the research and development sector to make advances in the design and properties of materials that can withstand harsh environments. The AlMo0.5NbTa0.5TiZr refractory high-entropy superalloy (RSA), with a remarkable morphological similarity to the γ/γ' microstructure of Ni-based superalloys and promising high-temperature compressive properties, has been considered as a candidate for structural applications. However, additional properties need to be investigated in order to assess the suitability of this alloy for high temperature applications. Therefore, this work investigates the thermodynamic and microstructural stabilities of the RSA at room temperature and between 900 and 1100 °C, and their influence on the mechanical properties. Although it is possible to improve the mechanical properties at 20 °C by tuning the cooling rate, long-term high temperature exposures lead to phase instabilities that negatively influence the creep behavior.
This research deals with the development of the Vickers hardness knowledge graph, mapping the example dataset in them, and exporting the data-mapped knowledge graph as a machine-readable Resource Description Framework (RDF). Modeling the knowledge graph according to the standardized test procedure and using the appropriate upper-level ontologies were taken into consideration to develop the highly standardized, incorporable, and industrial applicable models. Furthermore, the Ontopanel approach was utilized for mapping the real experimental data in the developed knowledge graphs and the resulting RDF files were successfully evaluated through the SPARQL queries.
This study aims to represent an approach for transferring the materials testing datasets to the digital schema that meets the prerequisites of the semantic web. As a use case, the tensile stress relaxation testing method was evaluated and the testing datasets for several copper alloys were prepared. The tensile stress relaxation testing ontology (TSRTO) was modeled following the test standard requirements and by utilizing the appropriate upper-level ontologies. Eventually, mapping the testing datasets into the knowledge graph and converting the data-mapped graphs to the machine-readable Resource Description Framework (RDF) schema led to the preparation of the digital version of testing data which can be efficiently queried on the web.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
The heat-resistant cast iron EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S) was investigated for its fatigue crack growth behavior at room and high temperatures. Force-controlled tests were carried out at constant temperatures (20 °C, 500 °C, 700 °C) without and with hold time and different load ratios. The crack growth behavior was also characterized under TMF loading (Tmin = 400 °C, Tmax = 700 °C) by applying IP and OP conditions and different load ratios. Three different techniques were combined to monitor crack growth: potential drop, thermography, and compliance method. The effect of the different loading conditions on the fatigue crack growth behavior will be presented and discussed.
In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with light into the volume of a ceramic powder compound, its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP), and other volumetric methods for the additive manufacture of filigree structures within the volume of ceramic slurries.
In order to be able to manipulate ceramic powder compacts and ceramic suspensions (slurries) within their volume with light, a minimum transparency of the materials is required. Compared to polymers and metals, ceramic materials are characterized by the fact that they have a wide electronic band gap and therefore a wide optical window of transparency. The optical window generally ranges from less than 0.3 µm to 5 µm wavelength. In order to focus light into the volume of a ceramic powder compact, its light scattering properties must therefore be tailored. In this study, we present the physical background and material development strategies for the application of two-photon polymerization (2PP) and selective volumetric sintering for the additive manufacturing of structures in the volume of ceramic slips and green compacts.
The Binder Jetting BJ process is one of the most versatile additive manufacturing technologies in use. In this process a binder is locally jetted into a powder bed for the consolidation of a 3D structure, layer by layer. Basically, all materials which can be provided as a flowable powder and, thus, spreadable to a thin layer, can be processed. Metals, ceramics and polymers are processable, but also materials from nature, such as sand, wood sawdust and insect frass. Moreover, the BJ technology is adapted to large building volumes of some cubic meters easily. Besides these striking advantages, the manufacture of ceramic parts by BJ is still challenging, as the packing density of the powder bed is generally too low and the particle size of a flowable powder too large for a successful densification of printed parts in a subsequent sintering step to an advanced ceramic product. After an introduction of binder jetting in general and highlighting some examples, strategies for obtaining dense ceramic parts by BJ will be introduced.
Regarding feedstocks for the additive manufacturing (AM) of ceramics, two features are most critical in classical powder based AM processes: a high particle packing density (typically >50% TD) must be achieved with very fine particles (typically submicron) in order to ensure sufficient sintering activity. Three innovative approaches will be introduced to overcome this problem:
1. Layer wise slurry deposition: The use of water based ceramic slurries as feedstock for the additive manufacture of ceramics has many advantages which are not fully exploit yet. In the layerwise slurry deposition (LSD) process a slurry with no or low organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle on the previously deposited and dried material to form thin layers with a high packing density (55-60%). The LSD therefore shares aspects both of tape casting and slip casting. The LSD differentiates from the classical powder-based AM layer deposition, which typically achieves with a flowable coarse grained powder a low packing density (35-50%) only, consequently hindering the ability of sintering ceramic parts to full density. The LSD is coupled with the principles of selective laser sintering (SLS) or binder jetting, to generate novel processes which take advantage of the possibility of achieving a highly dense powder-bed.
2. Laser induced slip casting: Contrary to the LSD process, which requires drying of each individual layer, the direct interaction of ceramic slurries with intense laser radiation, for the laser induced slip casting (LIS), is a promising approach for the additive manufacture of voluminous parts.
3. Gas flow assisted powder deposition: By the application of a vacuum pump a gas flow is realized throughout the powder bed. This gas flow stabilizes the powder bed and results into an enhanced flowability and packing density of the powder during layer deposition.
The presentation will provide a detailed discussion of potentialities and issues connected to the mentioned technologies and will describe the most recent developments in their application to technical ceramics.
Gas turbine components, made of nickel-based alloys, undergo material damage due to high temperatures and mechanical stresses. These components need periodic replacement to avoid efficiency loss and failure. Repair of these parts is more cost-effective than replacement. State-of-the-art repair technologies, including different additive manufacturing (AM) and brazing processes, are considered for efficient restoration. Materials properties mismatches and/or internal defects in repaired parts may expedite crack initiation and propagation, reducing fatigue life. To understand the crack growth behavior in joining zones and predict the remaining life of repaired components, fatigue crack growth (FCG) tests were conducted on specimens of nickel-based alloys joined via brazing, pre-sintered preforms and AM. The FCG experimental technique was successfully adapted for joined specimens and results indicate that the investigated braze material provides a lower resistance to crack growth. In AM-sandwich specimens, the crack growth rates are significantly reduced at the interface of AM and cast material.
Unlike conventional alloys, which typically consist of one main element, high-entropy alloys (HEAs) contain five or more principal elements, which broaden chemical complexity and with it a realm of synergistic mechanisms. The AlMo0.5NbTa0.5TiZr HEA initiated a subclass of Al-containing refractory (r)HEAs that has recently drawn attention [2]. The alloy has a superalloy-resembling B2/bcc nanostructure, which inspired its name refractory high entropy superalloy (RSA). With high-temperature (HT) compressive strengths beyond conventional Ni-based superalloys, this nanostructure could be used for improved HT structural applications. However, in the application-relevant HT regime the Al-Zr-rich B2 phase decomposes to form a hexagonal Al-Zr-based intermetallic (Al4-xZr5; x: 0..1) [3,4]. This work explores the fascinating yet fatal micromechanisms associated to this phase transformation, in the context of creep, annealing and oxidation experiments performed between 800 and 1200 °C.
The material was produced by arc-melting and heat treatment in argon, which lead to grain boundaries decorated with up to 7%. Interrupted constant-load creep tests were performed under vacuum (at 10-4 Pa), at 900–1100 °C with external tensile stresses of 30–120 MPa. Oxidation experiments were separately conducted for 24 hours at 800 and 1000 °C in both dry (21% O2 + 79% N2) and humid (8% O2 + 74% N2 + 18% H2O) air. After the experiments, the samples were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy to reveal degradation mechanisms. Crystallographic texture, orientation relationships and stabilization of an oxygen-containing iso structure (Al4-xZr5(Ox-y); y: 0..x) of the Al-Zr-rich intermetallic are found and discussed.
This is the stable version of the full-notch creep test ontology (OntoFNCT) that ontologically represents the full-notch creep test. OntoFNCT has been developed in accordance with the corresponding test standard ISO 16770:2019-09 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).
The OntoFNCT provides conceptualizations that are supposed to be valid for the description of full-notch creep tests and associated data in accordance with the corresponding test standard. By using OntoFNCT for storing full-notch creep test data, all data will be well structured and based on a common vocabulary agreed on by an expert group (generation of FAIR data) which is meant to lead to enhanced data interoperability. This comprises several data categories such as primary data, secondary data and metadata. Data will be human and machine readable. The usage of OntoFNCT facilitates data retrieval and downstream usage. Due to a close connection to the mid-level PMD core ontology (PMDco), the interoperability of full-notch creep test data is enhanced and querying in combination with other aspects and data within the broad field of materials science and engineering (MSE) is facilitated.
The class structure of OntoFNCT forms a comprehensible and semantic layer for unified storage of data generated in a full-notch creep test including the possibility to record data from analysis and re-evaluation. Furthermore, extensive metadata allows to assess data quality and reliability. Following the open world assumption, object properties are deliberately low restrictive and sparse.
Processing and cytocompatibility of Cu-doped and undoped fluoride-containing bioactive glasses
(2024)
Sintered or additive-manufactured bioactive glass (BG) scaffolds are highly interesting for bone replacement applications. However, crystallization often limits the high-temperature processability of bioactive glasses (BGs). Thus, the BG composition must combine high bioactivity and processability. In this study, three BGs with nominal molar (%) compositions 54.6SiO2-1.7P2O3-22.1CaO-6.0Na2O-7.9K2O-7.7MgO (13–93), 44.8SiO2-2.5P2O3-36.5CaO-6.6Na2O-6.6K2O-3.0CaF2 (F3) and 44.8SiO2-2.5P2O3-35.5CaO-6.6Na2O-6.6K2O-3.0CaF2-1.0CuO (F3–Cu) were investigated. The dissolution and ion release kinetics were investigated on milled glass powder and crystallized particles (500–600 μm). All glasses showed the precipitation of hydroxyapatite (HAp) crystals after 7 days of immersion in simulated body fluid. No significant differences in ion release from glass and crystalline samples were detected. The influence of surface roughness on cytocompatibility and growth of preosteoblast cells (MC3T3-E1) was investigated on sintered and polished BG pellets. Results showed that sintered BG pellets were cytocompatible, and cells were seen to be well attached and spread on the surface after 5 days of incubation. The results showed an inverse relation of cell viability with the surface roughness of pellets, and cells were seen to attach and spread along the direction of scratches.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.