5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (460)
- Zeitschriftenartikel (416)
- Posterpräsentation (116)
- Beitrag zu einem Tagungsband (76)
- Forschungsdatensatz (27)
- Buchkapitel (11)
- Dissertation (10)
- Forschungsbericht (7)
- Sonstiges (5)
- Sammelband (Herausgeberschaft für den kompletten Band) (3)
Sprache
- Englisch (965)
- Deutsch (160)
- Mehrsprachig (9)
- Französisch (2)
- Russisch (1)
Schlagworte
- Additive Manufacturing (67)
- Additive manufacturing (61)
- Corrosion (57)
- Microstructure (44)
- Glass (40)
- Ontology (39)
- Creep (35)
- Fatigue (30)
- Transmission electron microscopy (30)
- EBSD (28)
- Degradation (19)
- Sintering (19)
- CCS (18)
- Ceramics (18)
- Crack growth (18)
- Crystallization (17)
- Residual stress (17)
- LCF (16)
- Steel (16)
- 316L (15)
- Ontologie (15)
- Additive Fertigung (14)
- Ceramic (14)
- Oxidation (14)
- High entropy alloys (13)
- Ti-6Al-4V (13)
- High temperature corrosion (12)
- Machine Learning (12)
- Nanoparticles (12)
- Aging (11)
- Aluminium (11)
- CCUS (11)
- Carbon steel (11)
- Electron microscopy (11)
- Fraktographie (11)
- Mechanical properties (11)
- Particle size (11)
- Scanning electron microscopy (11)
- 3D printing (10)
- Alloy 2618A (10)
- CALPHAD (10)
- CO2 (10)
- Coarsening (10)
- Crystal plasticity (10)
- FAIR (10)
- Fractography (10)
- Glas (10)
- High entropy alloy (10)
- Low Cycle Fatigue (10)
- Neutron diffraction (10)
- SEM (10)
- Simulation (10)
- AISI 316L (9)
- DCB (9)
- Diffraction (9)
- Digitalization (9)
- EN AW-2618A (9)
- Glass fiber reinforced polymers (9)
- Impurities (9)
- Laser powder bed fusion (9)
- Mikrostruktur (9)
- Slurry (9)
- Thermoelectrics (9)
- VSSA (9)
- Water speciation (9)
- X-ray diffraction (9)
- AGIL (8)
- Alumina (8)
- Digitalisierung (8)
- Geothermal (8)
- High-temperature corrosion (8)
- Hydrogen (8)
- Kriechen (8)
- Martensitic steel (8)
- Nickel-base superalloys (8)
- S-phase (8)
- Semantic Web Technologies (8)
- Sulfidation (8)
- TEM (8)
- Aluminium alloy (7)
- Anisotropy (7)
- Damage (7)
- Heat treatment (7)
- Layerwise slurry deposition (7)
- Mechanical testing (7)
- Plattform MaterialDigital (7)
- Powder (7)
- Semantic Interoperability (7)
- Soda-lime silicate glass (7)
- Thermomechanical fatigue (7)
- Vickers (7)
- Water content (7)
- Zugversuch (7)
- Bioactive glass (6)
- CO2 quality (6)
- Composite (6)
- Computed Tomography (6)
- Data Interoperability (6)
- Environmental stress cracking (6)
- Foaming (6)
- Full Notch Creep Test (6)
- HIP (6)
- In situ (6)
- Knowledge Representation (6)
- LTCC (6)
- Laser Powder Bed Fusion (6)
- Lattice parameters (6)
- Metallic glasses (6)
- Nano powder (6)
- P92 (6)
- Plasticity (6)
- Polymer (6)
- Residual Stress (6)
- Robotic melting (6)
- Sandwich (6)
- Schadensanalyse (6)
- Schädigung (6)
- Selective laser melting (6)
- Superalloy (6)
- Supercritical/dense phase CO2 (6)
- TMF (6)
- Viscosity (6)
- Wind turbine blades (6)
- Alterung (5)
- Betriebsfestigkeit (5)
- CCU (5)
- Carbon capture (5)
- Carbon steels (5)
- Creep behavior (5)
- Dark-field transmission electron microscopy (DFTEM) (5)
- Data mapping (5)
- Diesel (5)
- Diffusion (5)
- Dislocation (5)
- Droplet corrosion (5)
- Electron backscatter diffraction (5)
- Environmental stress cracking (ESC) (5)
- FAIR data (5)
- FAIR data management (5)
- Fe-Al alloys (5)
- Fracture (5)
- High alloyed steel (5)
- High-density polyethylene (5)
- Inconel 686 (5)
- Intermetallics (5)
- Iron aluminides (5)
- Keramik (5)
- Knowledge graph and ontologies (5)
- Lebensdauer (5)
- Microgravity (5)
- Mikroplastik (5)
- Modeling (5)
- Nanoindentation (5)
- Non-destructive testing (5)
- Normung (5)
- PMD Core Ontology (5)
- Phase-field simulation (5)
- Pipeline (5)
- Pipeline network (5)
- Polymer matrix composites (5)
- Reference data (5)
- Sample preparation (5)
- Shear modulus (5)
- Stress relaxation (5)
- Superaustenite steel (5)
- Tensile Test (5)
- Tensile testing (5)
- Texture (5)
- ToF-SIMS (5)
- Transmission electron microscopy (TEM) (5)
- Vickers indentation (5)
- Wissensrepräsentation (5)
- Workflow (5)
- X-ray refraction (5)
- Young's modulus (5)
- 3D-printing (4)
- AISI 304L (4)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Aluminum alloys (4)
- Bildanalyse (4)
- Binder Jetting (4)
- Brinell hardness (4)
- Calcination (4)
- Calcium cobaltite (4)
- Carbon capture storage (4)
- Carbon dioxide (4)
- Characterization (4)
- Chemically complex alloy (4)
- Coating (4)
- Composites (4)
- Compositionally complex alloys (4)
- Concrete (4)
- Crack propagation (4)
- Crack tip opening displacement (4)
- Creep-fatigue (4)
- Crystal orientation (4)
- Data Fusion (4)
- Data Space (4)
- Deuterium (4)
- EXAFS (4)
- Elastic modulus (4)
- Environmental Stress Cracking (4)
- Ermüdung (4)
- Fatigue crack growth (4)
- Finite element analysis (4)
- Fracture surface (4)
- Fracture toughness (4)
- Full-Notch Creep Test (FNCT) (4)
- GD-OES (4)
- Gassensorik (4)
- High Cycle Fatigue (4)
- High temperature (4)
- High-entropy alloy (4)
- High-entropy alloys (4)
- IN718 (4)
- In-space manufacturing (4)
- Inconel 718 (4)
- Internal friction (4)
- Kikuchi patterns (4)
- Low cycle fatigue (4)
- Martensite (4)
- Mechanical behavior (4)
- Metallic glass (4)
- Microplastics (4)
- Microstrucrue Design (4)
- Microstructural characterization (4)
- Microstructure Design (4)
- Microstructure evolution (4)
- Molecular dynamics (4)
- NTE (4)
- Nano (4)
- Nano-powder (4)
- Ni-Resist (4)
- Orientation (4)
- Oxidglas (4)
- PE-HD (4)
- Pattern matching (4)
- Pitting (4)
- Plastic deformation (4)
- Plattform Material Digital (4)
- Polyaniline (4)
- Precipitation (4)
- Raman spectroscopy (4)
- Recommendations (4)
- Reproducibility (4)
- Roughness (4)
- SIMS (4)
- Scale-bridging (4)
- Scarf repairs (4)
- Self-healing (4)
- Single crystal (4)
- Spectroscopy (4)
- Spray drying (4)
- Surface (4)
- Surface energy (4)
- TED-GC-MS (4)
- Tensile Test Ontology (4)
- Tensile test (4)
- Thermomechanics (4)
- Ultrasound (4)
- Virtual experiments (4)
- Welding (4)
- Whole-chain CCS scenario (4)
- XRD (4)
- Zerstörungsfreie Prüfung (4)
- Zirconia (4)
- 3D (3)
- 3D-Printing (3)
- Ab-initio (3)
- Advanced ceramics (3)
- Aluminium Alloy (3)
- Binder jetting (3)
- Bioceramics (3)
- Biodiesel (3)
- CFK (3)
- CLS (3)
- Carbon Fiber Reinforced Plastics (3)
- Carbon fibres (3)
- Cement (3)
- Ceramic spring (3)
- Computed tomography (3)
- Corrosion Fatigue (3)
- Corrosion fatigue (3)
- Coulomb explosion (3)
- Crack (3)
- Crack Propagation (3)
- Crack evolution (3)
- Crack healing (3)
- Creep data (3)
- Dark-field transmission electron microscopy (3)
- Datenbank (3)
- Defects (3)
- Destabilization (3)
- Dielectric breakdown (3)
- Dielectric strength (3)
- Diffraction Enhanced Imaging (3)
- Digital image correlation (3)
- Digitaler Zwilling (3)
- Digtial Representation (3)
- Diopside (3)
- Elastic constants (3)
- Electron Backscatter Diffraction (3)
- Electronic Lab Notebook (3)
- FIB (3)
- Ferritic-martensitic steels (3)
- Fracture Toughness (3)
- Fracture mechanics (3)
- Fracture surface analysis (3)
- Full notch creep test (FNCT) (3)
- GFRP (3)
- General Materials Science (3)
- Glass ceramic (3)
- Glass powder (3)
- Glass transition (3)
- Glass-ceramic (3)
- Glass-ceramics (3)
- Gold nanoparticles (3)
- Grain boundaries (3)
- Grain boundary (3)
- Grain boundary engineering (3)
- H2Safety@BAM (3)
- Hardness (3)
- High Entropy Alloy (3)
- High temperature mechanical properties (3)
- IN 718 (3)
- ISRU (3)
- In situ tensile test (3)
- Infrarotspektroskopie (3)
- Interfacial strength (3)
- Interoperability (3)
- Inverted classroom (3)
- Iron (3)
- Iron oxide nanoparticles (3)
- Kikuchi diffraction (3)
- Kikuchi pattern (3)
- Knowledge graph (3)
- Korrosion (3)
- Laser (3)
- Laser ablation in liquid (3)
- Laser beam melting (3)
- Laser cladding (3)
- Laser scanning microscopy (LSM) (3)
- Lattice misfit (3)
- Layerwise Slurry Deposition (3)
- Lightweight materials (3)
- Lithium Ion Batteries (3)
- Luftultraschall (3)
- ML (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Mechanische Eigenschaften (3)
- Metadata schema (3)
- Microhardness (3)
- Microstructure analysis (3)
- Multilayer (3)
- NMR spectroscopy (3)
- Nanomaterials (3)
- Nickel-based superalloys (3)
- Ontologies (3)
- Oxide Glasses (3)
- PBF-LB/M/316L (3)
- PMD (3)
- PMDco (3)
- Permeability (3)
- Phase transformations (3)
- Phase-field (3)
- Polyethylene (3)
- Porosity (3)
- Pressure-assisted sintering (3)
- Pulveraktivkohle (3)
- REM (3)
- Referenzdaten (3)
- Relaxation (3)
- Research Data Management (3)
- Residual Stresses (3)
- Residual stresses (3)
- Rotor blade (3)
- Röntgenrefraktion (3)
- S-Phase (3)
- SLM (3)
- Scintillators (3)
- Selective Laser Melting (3)
- Semantic Data (3)
- Semantic Web (3)
- Shape-memory alloys (3)
- SiO2 (3)
- Silicate Glasses (3)
- Silicon Carbide (3)
- Single-crystals (3)
- Slow crack growth (SCG) (3)
- Sol-gel (3)
- Sol-gel coating (3)
- Solid-state (3)
- Solubility (3)
- Stress intensity factor (3)
- Sulfiding (3)
- Superalloys (3)
- Superlegierung (3)
- Surface crystallization (3)
- Syngle Crystal alloy (3)
- TDEP (3)
- Temperature (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile data (3)
- Thermal expansion (3)
- Thermo-Mechanical Fatigue (3)
- Thermogravimetrie (3)
- Titanium (3)
- Titanium oxide (3)
- Topography (3)
- UV-irradiation (3)
- Utilization (3)
- Vickers hardness (3)
- Viscoplasticity (3)
- Wasser (3)
- Wind energy (3)
- Wind turbine blade shells (3)
- Windenergie (3)
- µ-gravity (3)
- μ-gravity (3)
- 3D Druck (2)
- AM (2)
- Additiv gefertigter Stahl (2)
- Adiabatic calorimeter (2)
- Ageing (2)
- Agglomerates (2)
- Aggressive environment (2)
- Air-coupled ultrasonic testing (2)
- Airborne ultrasonic testing (2)
- Al-Cu-Li alloys (2)
- Al2O3 (2)
- Alloy design (2)
- Aluminosilicate glasses (2)
- Aluminum (2)
- Aluminum alloy (2)
- Analysis (2)
- Analytische Zentrifuge (2)
- Annealing (2)
- Aquifer (2)
- Atom probe tomography (2)
- Austenitic stainless steel (2)
- Austenitic steel 316L (2)
- Automation (2)
- Bacteria (2)
- Belebtschlamm (2)
- Biaxial strength (2)
- Bio Ceramics (2)
- Bioactive Glass (2)
- Bioactivity (2)
- Biofilm (2)
- Bond energy (2)
- Bone regeneration (2)
- Brittle fracture (2)
- Bruchflächen (2)
- Bulk metallic glasses (2)
- CO2-storage (2)
- CT (2)
- Calciumcobaltit (2)
- Calciummanganat (2)
- Capture (2)
- Carbon (2)
- Carbon capture and storage (2)
- Carbon storage (2)
- Casting (2)
- CeO2 (2)
- Ceramic multilayer (2)
- Ceria (2)
- Chemo-mechanical coupling (2)
- Chromium oxide (2)
- Coatings (2)
- Condensate (2)
- Condensation (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Corrosion resistance (2)
- CrCoNi (2)
- CrMnFeCoNi (2)
- Crack propagation analysis (2)
- Creep-Fatigue (2)
- Crevice corrosion (2)
- Crop protection products (2)
- Cross linking (2)
- Cure process (2)
- Cyclic softening (2)
- DLS (2)
- Data Management (2)
- Data Structures (2)
- Data analysis (2)
- Data management (2)
- Dataset (2)
- Debinding (2)
- Deep Learning (2)
- Dehnungsfehler (2)
- Density (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Dental (2)
- Depth-profiling (2)
- Dielectric properties (2)
- Diffraction Elastic Constants (2)
- Diffraction contrast (2)
- Diffusion coefficient (2)
- Digital material representation (2)
- Digital representation (2)
- Digitization (2)
- Diopsid (2)
- Dislocations (2)
- Dispersion process (2)
- Distribution function (2)
- Ductile iron (2)
- Dynamic mechanical analysis (DMA) (2)
- EDX (2)
- EDXRD (2)
- Early oxidation (2)
- Elastic microstructure (2)
- Elasticity (2)
- Electron beam induced modification (2)
- Electron beam-induced fragmentation (2)
- Electron diffraction (2)
- Electron energy (2)
- Electron-beam-induced modification (2)
- Energy distribution (2)
- Environmental Stress Cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Epoxy (2)
- Erneuerbare Energien (2)
- Extensometer (2)
- FAIR Data Management (2)
- Fahrrad (2)
- Faser-Kunststoff-Verbunde (2)
- Faserkunststoffverbunde (2)
- Faseroptische Sensorik (2)
- Fatigue damage (2)
- Fatigue of sandwich shell structures (2)
- Fatigue performance (2)
- Fatigue testing (2)
- FeCr- alloys (2)
- Ferroelectret (2)
- Ferroelektret (2)
- Fiber reinforced polymer (2)
- Flowability (2)
- Fluoride phosphate glasses (2)
- Fracture Surface Analysis (2)
- Fracture surface energy (2)
- Fraktografie (2)
- Fungi (2)
- GFK (2)
- Geführte Ultraschallwellen (2)
- Gender gap (2)
- Gitterkonstanten (2)
- Glass Digital (2)
- Glass composition (2)
- Glass forming (2)
- Gold (2)
- Granules (2)
- HEA (2)
- Hard machining (2)
- Heat Treatment (2)
- High Alloyed Steel (2)
- High Entropy Alloys (2)
- High Temperature Corrosion (2)
- High Temperature Testing (2)
- Hochentropie-Legierung (2)
- Hochtemperatur (2)
- Hot pressing (2)
- Hot stage microscopy (2)
- Hydrogen permeation (2)
- IR (2)
- Imaging techniques (2)
- In-situ (2)
- Inconel 625 (2)
- Infrared spectroscopy (2)
- Infrastructure (2)
- Injection (2)
- Interface (2)
- Interfacial shear strength (2)
- Interphase (2)
- Ionic porosity (2)
- Joined nickel-based alloys (2)
- Kavitation (2)
- Keramikfeder (2)
- Kikuchi (2)
- Kleinprobenprüfung (2)
- Knowledge Graph (2)
- Kontrastierung (2)
- L-PBF (2)
- LPBF (2)
- LSD-print (2)
- Laminography (2)
- Laser Powder Bed fusion (2)
- Lattice distortion (2)
- Layerwise (2)
- Lead borate glasses (2)
- Leckdetektion (2)
- Li-ion battery (2)
- Long-term behavior (2)
- Long-term storage (2)
- Lorenz transmission electron microscopy (2)
- Lunar habitat (2)
- Lunar regolith (2)
- Lunar regolith simulant (2)
- MEA (2)
- MOUSE (2)
- Manganese oxide (2)
- Manufacturing (2)
- Mars (2)
- Martensitic transformation (2)
- Mass transport (2)
- Material Digital (2)
- Material degradation (2)
- Material digital (2)
- Materials Modelling (2)
- Materials science (2)
- Medium Entropy Alloys (2)
- Melt pool boundary (2)
- Metal seal (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Micro-shrinkages (2)
- Micromechanical model (2)
- Microstructural analysis (2)
- Microstructural evolution (2)
- Microstructure and texture (2)
- Microstructure-property-correlation (2)
- Mikrostrukturentwicklung (2)
- Mixed Ca-K-Na phosphates (2)
- Mixed gas atmosphere (2)
- Mobility (2)
- Monte-Carlo Simulation (2)
- Multiaxial deformation (2)
- Multifunctional nanoparticles (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- NDT (2)
- NFDI (2)
- Na and K rhenanites (2)
- Nano particle (2)
- Nano screening (2)
- Nanomaterial (2)
- Nanopulver (2)
- Nanostructure quantification (2)
- Native oxide (2)
- Neutron Diffraction (2)
- Nickel alloys (2)
- Nickel-base alloy (2)
- Niobium alloying (2)
- Notches (2)
- Nucleation (2)
- OECD TG 124 (2)
- Ontologien (2)
- Ontology development (2)
- Orientation precision (2)
- Oriented surface crystallization (2)
- Ostwald ripening (2)
- Oxidation behavior (2)
- Oxyfuel (2)
- Parametric modeling (2)
- Particle morphology (2)
- Partikelgrößenverteilung (2)
- Paving (2)
- Phase change material (2)
- Phase diagram (2)
- Phase separation (2)
- Phase transformation (2)
- Phase-Field Simulations (2)
- Phasenidentifikation (2)
- Photon counting detector (2)
- Pipelines (2)
- Polyethylen (2)
- Polyethylen hoher Dichte (2)
- Polyethylene, PE-HD (2)
- Polymer Matrix Composites (2)
- Porcelain (2)
- Pores (2)
- Preceramic polymer (2)
- Pressure assisted sintering (2)
- Probengrößeneffekt (2)
- Process monitoring (2)
- Protective coating (2)
- Präparation (2)
- Push-out Test (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Ratio refinement (2)
- Reaction sintering (2)
- Reaction-sintering (2)
- Recycling (2)
- Reference material (2)
- Refractory high entropy alloys (2)
- Ressidual stress (2)
- Review (2)
- Rissentwicklung (2)
- Risswachstum (2)
- Roboter (2)
- Robotische Glasschmelzanlage (2)
- Robotische Schmelzanlage (2)
- Rotorblattschalen (2)
- Round robin (2)
- Röntgen-Refraktion (2)
- Röntgenbeugung (2)
- S355 steel sheet (2)
- SAXS (2)
- Safety assessment (2)
- Salt eutectics (2)
- Scanning transmission electron microscopy (STEM) (2)
- Schadensprävention (2)
- Schwingstreifen (2)
- Semantic Representation (2)
- Semantic web (2)
- Semantisches Web (2)
- SensRef (2)
- Sensorik (2)
- Shear bands (2)
- Short-range order (2)
- Sibayak (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver nanoparticle (2)
- Silver-glass-metallization-paste (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Sinter additive (2)
- Sintering additives (2)
- Sintern (2)
- Size distribution (2)
- Slow crack growth (2)
- Small-angle scattering (2)
- Soda-lime-silica glass (2)
- Solar sintering (2)
- Sorption (2)
- Space (2)
- Spannungs-Dehnungs-Verhalten (2)
- Spannungsriss (2)
- Spring constant (2)
- Stainless steel (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Starch (2)
- Starch nanoparticle (2)
- Steels (2)
- Storage (2)
- Strength (2)
- Stress corrosion cracking (2)
- Structural Health Monitoring (SHM) (2)
- Structural steel (2)
- Struktur (2)
- Sulphidation (2)
- Superalloy single crystals (2)
- Superconducting magnet (2)
- Supercritical CO2 (2)
- Surface Energy (2)
- Surface nucleation (2)
- Surface treatments (2)
- Symmetric dwell periods (2)
- Synchrotron Tomography (2)
- Synchrotronstrahlung (2)
- Synthetic air (2)
- Temperaturschwankungen (2)
- Tensile Properties (2)
- Tensile properties (2)
- Thermal Spray (2)
- Thermal energy storage (2)
- Thermoanalyse (2)
- Thermodynamics (2)
- Thermoelectric (2)
- Thermoelectric oxide (2)
- Thermoelectric oxides (2)
- Thermoelectric properties (2)
- Thermographie (2)
- Thermography (2)
- Thermogravimetry (2)
- Thermomechanik (2)
- Thermoplastic (2)
- Thermoset polymers (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Topografie (2)
- Topographie (2)
- Toughness (2)
- Transmission electron microscope (TEM) (2)
- Transmissionselektronenmikroskopie (2)
- Transparent ceramics (2)
- Tribologie (2)
- Two Photon Polymerization (2)
- Under cyclic loading (2)
- Upconversion (2)
- Utilization, and storage (CCUS) technology (2)
- Viscous sintering (2)
- Volume specific surface area (2)
- Wall thickness (2)
- Wandler (2)
- Water-based (2)
- Weibull Distribution (2)
- Weibull distribution (2)
- Werkstoffprüfung (2)
- Wetting (2)
- Wind turbine (2)
- Wood protection (2)
- X-Ray Diffraction (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- X-ray laminography (2)
- XANES (2)
- Zero-g (2)
- Zugeigenschaften (2)
- corrosion (2)
- robotische Glasschmelzanlage (2)
- Öffentliche Sicherheit (2)
- 12%Cr steel (1)
- 150 Years (1)
- 2PP (1)
- 316L stainless steel (1)
- 3D REM (1)
- 3D Reconstruction (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D imaging (1)
- 3D materialography (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 5G (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AFM (1)
- AFM based test methods (1)
- ATZ (1)
- Abgasturbolader Heißteile (1)
- Abrasion (1)
- Abwasser (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Acid-leaching (1)
- Acids (1)
- Active thermography (1)
- Additive manufactured Ni-base superalloys (1)
- Adiabatic shear bands (1)
- Adolf Martens (1)
- Advanced high strength steels (1)
- Advanced manufacturing (1)
- Advanced wastewater treatment (1)
- Aerospace (1)
- Age hardening (1)
- Aggressive environement (1)
- Aggressive environments (1)
- Aggressive gases (1)
- Aging mechanisms (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alkali-activated materials (1)
- Allgemeine Grundlagen (1)
- Alloy (1)
- Alloy 2818A (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alpha-tricalcium phosphate (1)
- Alumina coatings (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminiumlegierung (1)
- Aluminum Alloy Aging (1)
- Amorphization (1)
- Amorphous silica (1)
- Analyse (1)
- Analytical scanning electron microscopy (1)
- Analytical services (1)
- Analytik (1)
- Angle measurement (1)
- Anhydrite (1)
- Anticorrosion (1)
- Anwendungen (1)
- Approximant (1)
- Aquifer fluid (1)
- Artefact (1)
- Artificial weathering (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atomic packing factor (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Atomization (1)
- Aufbau von Festkörpern (1)
- Aussonderugnsrate (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic cast iron (1)
- Austenitic steel (1)
- Austenitischer Stahl (1)
- Automatable digital approach (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automatische Finite Element Simulation (1)
- BCS (1)
- BET (1)
- BTEX (1)
- BTS (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Beanspruchung (1)
- Behmite (1)
- Berstdruck (1)
- Bilanzierung (1)
- Bimodal distribution (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactive (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Bioceramic (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Bioresorbable (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Blended learning (1)
- Blähen (1)
- Boden (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Breakdown strength (1)
- Brittle / ductile fracture behavior (1)
- Brown-rot fungi (1)
- Brownian motion (1)
- Bruch (1)
- Bruchflächenanalyse (1)
- Bruchflächenauswertung (1)
- Bubble formation (1)
- Bundesoberbehörden (1)
- Burst (1)
- Burst test (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CALPHAD databases analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CKAN (1)
- CMSX4 (1)
- CO2 Corrosion (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 separation membranes (1)
- CO2-Speicherung (1)
- CO2-corrosion (1)
- Cabon capture and storage (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calculated intrinsic fracture toughness (1)
- Calibration (1)
- Cantor alloy (1)
- Carbide phase NbC (1)
- Carbidic austempered ductile iron (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fibers (1)
- Carbon Fibre (1)
- Carbon capture, utilization and storage technology (1)
- Carbon fibre-reinforced-plastics (1)
- Carbon nanotubes (1)
- Casing (1)
- Catalogue of services (1)
- Cavitation (1)
- Ccs (1)
- CdTe quantum dots (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement-based materials (1)
- Centrifugal casting (1)
- Centrifugal compressor wheel (1)
- Ceramic multilayers (1)
- Ceramic nano particles (1)
- Ceramic springs (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chalcogenides (1)
- Characterisation (1)
- Charpy test (1)
- Chemically Complex Alloy (1)
- Chemically complex alloys (1)
- Chemische Analyse (1)
- Chemometrics (1)
- Chemometrie (1)
- Chromatography (1)
- Chromia (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-axial monitoring (1)
- Co-firing (1)
- Co-segregation (1)
- Co-firings (1)
- Co2-Storage (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Complex concentrated alloy (CCA) (1)
- Complex loading (1)
- Component assessment (1)
- Composite materials (1)
- Composite pressure vessels (1)
- Composite recycling (1)
- Composite structures (1)
- Composite testing (1)
- Compositionally complex alloy (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Coniophora puteana (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Contamination (1)
- Cooling rate (1)
- Cooling simulations (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion costs (1)
- Corrosion mechanism (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Covid-19 (1)
- Cow stress (1)
- Coûts de la corrosion (1)
- Cr2O3 (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Critical energy release rate (1)
- Crop protection formulations (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB geometry (1)
- DED-L (1)
- DIN (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage behavior (1)
- Damage evolution (1)
- Damage mechanisms (1)
- Data Exchange (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data fusion (1)
- Data infrastructures (1)
- Data linking (1)
- Data pipeline (1)
- Data pipeline concept (1)
- Data processing (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Datenfusion (1)
- Datenmanagement (1)
- Datenökosystem (1)
- Debonding (1)
- Deep learning (1)
- Defect detection (1)
- Defect population (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation behavior (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Demonstrators (1)
- Dense phase (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Dental ceramics (1)
- Dentine (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Die casting (1)
- Dielectric Spectroscopy (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffusivity (1)
- Digital Transformation (1)
- Digital Twin (1)
- Digital representations (1)
- Digital workflow (1)
- Digital workflows (1)
- Digitalizations (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Discrete element method (1)
- Dislocation avalanches (1)
- Dislocation substructure (1)
- Disordered assemblies (1)
- Disorientation (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Diversity (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Driving physical mechanism (1)
- Droplet (1)
- Druckgasspeicher (1)
- Dry preparation (1)
- Drywood termite (1)
- Dual-energy (1)
- Durchschlagfestigkeit (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- Dynamic mechanical analysis (1)
- Dynamic recrystallization (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EC4SafeNano (1)
- EFTEM (1)
- EIS (1)
- EN AW 2618A (1)
- EN AW 2618A a (1)
- EPR (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Eigenschaften (1)
- Eigenspannung (1)
- Elastic energy (1)
- Elastic properties (1)
- Elctronic Lab Notebook (1)
- Electric conductivity (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical deposition (1)
- Electrochemical dressing (1)
- Electrochemical impedance spectroscopy (1)
- Electromicroscopy (1)
- Electron Microscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron beam-induced charging (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- Electropolishing (1)
- Elektronisches Laborbuch (ELN) (1)
- Elektrotechnische Grundlagen (1)
- Enamel (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Endurance Limit (1)
- Energiedisersive Röntgenspektroskopie (1)
- Energiespeicherung (1)
- Energiewende (1)
- Energy harvesting (1)
- Energy transition (1)
- Entwicklung (1)
- Environment (1)
- Epitaxial films (1)
- Epoxidharz (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Ermüdungsriss (1)
- Etching (1)
- European Centre (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosionsschutz (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR Data (1)
- FAIR data. (1)
- FAIR principles (1)
- FAIR research data management (1)
- FCH JU (1)
- FIB Tomography (1)
- FNCT (1)
- FSDC (1)
- FT-IR (1)
- Fabrication (1)
- Fabrication method (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Failure test (1)
- Faser (1)
- Faser-Kunststoff-Verbund (1)
- Faseroptik (1)
- Faserverstärkte Kunstoffe (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue Testing (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stages (1)
- Fatigue fracture (1)
- Fatigue of sandwich structures (1)
- Fatigue striations (1)
- Fe-Mn steels (1)
- Federkonstante (1)
- Feldspar (1)
- Fem (1)
- Female noble prize winners (1)
- Femtosecond laser (1)
- Ferritic Alloys (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fertigungsprozess (1)
- Fertigungstechnologie (1)
- Festigkeit (1)
- Fiber (1)
- Fiber reinforced polymers (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Film depositition (1)
- Filters (1)
- Fine Powder (1)
- Finite element method (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- First year students (1)
- Flipped classroom (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Focused Ion Beam (1)
- Focussed ion beam growth (1)
- Foliengießen (1)
- Force-distance diagram (1)
- Formerkennung (1)
- Four-point bending test (1)
- Fourier series (1)
- Fourier transform infrared spectroscopy (1)
- Fracture Mechanics (1)
- Fracture behavior (1)
- Fracture surfaces (1)
- Fragility (1)
- Freeze Drying (1)
- Freeze casting (1)
- Fresnoit (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (FNCT) (1)
- Full notch creep test (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- Functional fatigue (1)
- Fused Filament Fabrication (1)
- GC-MS (1)
- GMR (1)
- GMR sensors (1)
- Gas flow assisted powder deposition (1)
- Gas permeation (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasdetektion (1)
- Gasgehalt (1)
- Gasturbinen (1)
- Gd3+ (1)
- Gefüge (1)
- Gefüge (Werkstoffkunde) (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- Gefügeuntersuchung (1)
- Gefügte Nickelbasislegierungen (1)
- General Aviation (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- Geometrical factors (1)
- Geopolymers (1)
- Gitterfehlpassung (1)
- Glas fibre reinforced polymer (1)
- GlasDigital (1)
- Glasfaserverstärkter Kunststoff (1)
- Glasmatrixkomposit (1)
- Glass Ceramic (1)
- Glass Fibres (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass fibre reinforced plastics (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass scintillator (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Glasses (1)
- Glasspeicher (1)
- Gleichgewicht (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Gold nanoparticle synthesis (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granulometrie (1)
- Graphic design (1)
- Graphite (1)
- Grenzflächenenergie (1)
- Growth kinetics (1)
- Growth rate (1)
- Grundlagen des Maschinenbaus (1)
- Grünfolieneigenschaften (1)
- Gypsum (1)
- HCF (1)
- HDPE Soprption (1)
- HDPE Sorption (1)
- HV-Insulation (1)
- Hardness test (1)
- Hartbearbeitung (1)
- Hausner ratio (1)
- Heat Treatments (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Heißgasextraktion (1)
- Heißgaskorrosion (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High - temperature corrosion (1)
- High Voltage Insulation (1)
- High alloyed steels (1)
- High cycle fatigue (1)
- High density polyethylene (1)
- High energy radiation (1)
- High entropy superalloys (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High pressure gas storage (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (PE-HD) (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Hochentropielegierung (1)
- Hochentropielegierungen (1)
- Hochleistungskeramik (1)
- Hochspannungsprüfung (1)
- Hochtemperaturbrennstoffzelle (1)
- Hochtemperaturermüdung (1)
- Homogenization (1)
- Honing (1)
- Honing Stone (1)
- Horizon 2020 (1)
- Host-guest hybrid materials (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hybrid Manufacturing (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen gas (1)
- Hydrogen permeability (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- Hyper-arid (1)
- IASCC (1)
- IN738LC (1)
- IR spectroscopy (1)
- Imaging (1)
- Impact damage (1)
- Impact wear (1)
- Implant failures (1)
- Implants (1)
- In situ diffraction (1)
- In situ synthesis (1)
- In situ thermal-annealing experiment (1)
- In-Situ Testing (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-situ tomography (1)
- In-vivo (1)
- In718 (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 686 coating (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Industrial and Manufacturing Engineering (1)
- Informationstechnische Grundlagen (1)
- Infrared nano AFM (1)
- Initial attachment (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interlaboratory comparability (1)
- Intermediate scale (1)
- Intermetallic (1)
- Intermetallische FeAl-Legierungen (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperable (1)
- Intrinsic stress (1)
- Invar (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Ion beam erosion Sectioning (1)
- Iron meteorite (1)
- Iron oxide (1)
- Irradiation (1)
- Irregular topography (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kalzinierung (1)
- Kennwertermittlung (1)
- Keramische Folien (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Klebung (1)
- Knowledge Graphs (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Komponentenprüfung (1)
- Kreislaufwirtschaft (1)
- Kriechermüdung (1)
- Kriechversuche (1)
- Kristallisation (1)
- Kristallorientierung (1)
- Kristallsystem (1)
- Kunststoffe (1)
- Kupfer (1)
- Kurzfaser-verstärkte Thermoplaste (1)
- Kurzzeitfestigkeit (1)
- L-PBF 316L (1)
- LIBS (1)
- LMD (1)
- LSD print (1)
- LTCC multilayer (1)
- Laboratory X-ray diffraction (1)
- Laminographie (1)
- Langzeitstabilität (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Poeder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Scanning Microscopy (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser beam melting (LBM) (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laser light scattering (1)
- Laser powder-based directed energy deposition (1)
- Laser-Pulverbettschmelzen (1)
- Laser-induced slip casting (1)
- Laserbearbeitung (1)
- Laserscanningmikroskopie (LSM) (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Lattices (1)
- Laves phase (1)
- Layer depostion (1)
- Layer system (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Lebensdauervorhersage (1)
- Lecture films (1)
- Lecture videos (1)
- Legierung mit komplexer Zusammensetzung (1)
- Lehrfilm (1)
- Lehrfilmformate (1)
- Life cycle (1)
- Lifetime prediction (1)
- Light curing (1)
- Lightweighting (1)
- Limestone Filler (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Lithium-ion batteries (1)
- Lithography-based technologies (1)
- Local landscape evolution (1)
- Localized plasmons (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Low-loading (1)
- Lösungsmittel (1)
- Lötverbindung (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic domains (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetische Domänen (1)
- Magnetoelastic effect (1)
- Magnetoelastischer Effekt (1)
- Magnetomechanical effect (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Master curve (1)
- Masterschädigungslinie (1)
- Mat-o-lab (1)
- Material Life Cycle (1)
- Material characterization (1)
- Material defects (1)
- Material failure (1)
- Material modeling (1)
- Material oxidation (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialkreislauf (1)
- Materialmodell (1)
- Materialprüfung (1)
- Materials Chemistry (1)
- Materials Data Space (1)
- Materials Science (1)
- Materials Testing (1)
- Materials and Processes Data Reusability (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Materialwissenschaft (1)
- Mathematisch-naturwissenschaftliche Grundlagen (1)
- Matrix (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical Behavior (1)
- Mechanical Properties (1)
- Mechanical and thermal testing (1)
- Mechanical anisotropy (1)
- Mechanical deformation (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Medium entopy alloy (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Medium-entropy alloy (1)
- Mehrachsige Verformung (1)
- Mehrskalenmodell (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metal powder characterization (1)
- Metall (1)
- Metallic Glass (1)
- Metallic components (1)
- Metallic materials (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metals and Alloys (1)
- Metformin (1)
- Methodology (1)
- Metrologie (1)
- Metrology (1)
- Micro computed tomography (1)
- Microbiologically influenced corrosion (1)
- Micromanipulation (1)
- Microplastic stress (1)
- Microsegregation (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural orientation (1)
- Microstructure Analysis (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure modification (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrogravitation (1)
- Mikrostrukturuntersuchung (1)
- Milling (1)
- Mindedestberstdruck (1)
- Mini-UAV (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Missing acknowledgment (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Mn3O4 (1)
- Model (1)
- Model alloy (1)
- Modell (1)
- Moisture (1)
- Molecular Dynamics (1)
- Molten salt (1)
- Monte-Carlo-Analysis (1)
- Moon (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial stress state (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NFDI-MatWerk (1)
- NGS (1)
- NIST (1)
- NMR (1)
- Nahinfrarotspektroskopie (1)
- Nano CRM (1)
- Nano material (1)
- Nano metal fluorides (1)
- Nano-assemblies (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-composite (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nano-safety (1)
- Nano-scratch test (1)
- NanoCAM (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterial screening (1)
- Nanoparticle structure (1)
- Nanoparticle synthesis (1)
- Nanopartikel (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Negative charged microparticle (1)
- Net zero (1)
- Networking (1)
- New standards (1)
- Ni-Mn-Ga (1)
- NiMaGa (1)
- NiTi (1)
- Nickel based coatings (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Nitride (1)
- Noble metal nanoparticles (1)
- Non-Destructive Testing (1)
- Non-desired foaming (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Nondestructive testing (1)
- Notch (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Number density (1)
- Numerische Simulation (1)
- Nydrogen melting (1)
- OECD TG (1)
- Oberflächenaktive wässrige Medien (1)
- Oberflächenkeimbildung (1)
- Online (1)
- Online Process Monitoring (1)
- Online quality control (1)
- Online teaching (1)
- Ooxidation (1)
- Optic (1)
- Optical and Magnetic Materials (1)
- Optical backscatter reflectometry (1)
- Optical centrifugation (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Optical fibre (1)
- Optical properties (1)
- Optical properties of glasses and ceramics (1)
- Optical spectroscopy (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orientation-dependent microstructure (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Overaging (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxide scale (1)
- Oxides (1)
- Oxygen evolution reaction (1)
- P92 steels (1)
- PA6.6 (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PPA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Particle Size Distribution (1)
- Particle size determination (1)
- Particle-bed binder jetting (1)
- Partikelgröße (1)
- Passive components and circuits (1)
- Patent (1)
- Peem (1)
- Permittivity reduction (1)
- Persistent luminescence (1)
- Persistent luminescent (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Phosphors (1)
- Photocatalysis (1)
- Photocleavable organosilanes (1)
- Photodynamic therapy (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Physical properties (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Phytolith (1)
- Pitting corrosion (1)
- Planetary surface (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Platinum-group-metals (1)
- Plattform Material Digital (PMD) (1)
- Pole figures (1)
- Polymer Matrix Composite (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymerwissenschaften (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Pore (1)
- Porosification (1)
- Porous materials (1)
- Portfolio (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder deposition (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Power factor (1)
- Power law (1)
- Power plant (1)
- Power-to-Gas (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- ProMoAM (1)
- Process (1)
- Process Monitoring (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Proficiency test (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Property simulation (1)
- Protection (1)
- Prozessmonitoring (1)
- Pseudosymmetry (1)
- Pull-out (1)
- Pull-out composite materials (1)
- Pultruded fiber rods (1)
- Pycnometry (1)
- Quality assurance (1)
- Quantitative Precipitation Analysis (1)
- Quantitative image analysis (1)
- Quantum dots (1)
- Radiation-matter interaction (1)
- Radii distribution (1)
- Radon transform (1)
- Rafting (1)
- Raman (1)
- Reaction Sintering (1)
- Real time growth control (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference Material (1)
- Reference material BCR-425 (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Refractory alloy (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Refractory superalloys (1)
- Regelwerke (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Relaxation metallic glasses (1)
- Relaxation tests (1)
- Relaxationsphänomene (1)
- Reliability (1)
- Reliable characterization (1)
- Renewable ernergy (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Residual strains (1)
- Residual stress analysis (1)
- Resistance (1)
- Resistance spot welding (1)
- Resistance stress (1)
- Resonance testing (1)
- Restberstfestigkeit (1)
- Reusability (1)
- Reusable data (1)
- Rheology (1)
- Rhodonia placenta (1)
- Risikoanalyse (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissfortschritt (1)
- Rissheilung (1)
- Rissverlauf (1)
- Robot-assisted galss melting (1)
- Robotic glass melting (1)
- Rohrprobekörper (1)
- Rotorblatt (1)
- Rotorblätter (1)
- Round Robin (1)
- SDC (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEN-Probe (1)
- SHM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Sailplane Development Panel (1)
- Sall-angle scattering (1)
- Salt melt (1)
- Salzschmelzen (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich structures (1)
- Sandwichstruktur (1)
- Scaffold (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scarf joint (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- Scavenging effect of iron (1)
- Schadenskunde (1)
- Schalenprüfstand (1)
- Schlickerdeposition (1)
- SchwarzP cells (1)
- Schwerelosigkeit (1)
- Schwingbrüche (1)
- Scratches (1)
- Screen printing (1)
- Screening method (1)
- Segregation (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic structuring (1)
- Semantische Daten (1)
- Semiconductor materials (1)
- Sensing (1)
- Sensor (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Sewage treatment plant (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silber (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silicon release (1)
- Silikatkeramik (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Simulation workflow (1)
- Simulationsgestützte Gießkonzepte (1)
- Single crystal Ni-Base superalloys (1)
- Single crystal superalloys (1)
- Single fiber pull-out test (1)
- Single-crystal (1)
- Sinter retardation (1)
- Sintering additive (1)
- Sintering atmosphere (1)
- Sintermechanismen (1)
- Sintertemperatur (1)
- Sinterung (1)
- Sinus floor augmentation (1)
- Size (1)
- Size and size distribution (1)
- Size effect (1)
- Sliding simulation (1)
- Slip localization (1)
- Slip-rolling (1)
- Slow Crack Growth (SCG) (1)
- Slurry optimization (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Softening temperature (1)
- Soil (1)
- Soil sample (1)
- Solar panels (1)
- Solid solution strengthening (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solidification (1)
- Space exploration (1)
- Spar cap design (1)
- Spark plasma sintering (1)
- Specific surface (1)
- Specimen geometry (1)
- Spezifische Oberfläche (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Split-vacancy defect complexes (1)
- Spring constant (1)
- Stable crack growth (1)
- Standardisation (1)
- Stanzen (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strain rate dependence (1)
- Stratégies deprévention (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Streuung (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural health monitoring (SHM) (1)
- Structure (1)
- Structure property correlations (1)
- Structure-property correlation (1)
- Structured Data (1)
- Structured heating (1)
- Subcritical crack growth (1)
- Subsurface defects (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Superlegierungen (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface Nucleation (1)
- Surface elasticity (1)
- Surface modification (1)
- Surface roughness (1)
- Surface stress (1)
- Surface-induced Melting (1)
- Swept wavelength interferometry (1)
- Swept wavelength interferometry (SWI) (1)
- Symbolik (1)
- Synchrotron (1)
- Synchrotron CT (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiation (1)
- Synchrotron radiations (1)
- Synchrotron tomography (1)
- Synthesis (1)
- Systematische Schadensanalysen, Prozeduren (1)
- T1 precipitate (1)
- TAHYA (1)
- TED (1)
- TIG-welding (1)
- TMF experiments (1)
- Tb3+ (1)
- Technical Ceramics (1)
- Technische Keramik (1)
- Temperature dependence (1)
- Temperature driven process (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Tensile stress relaxation testing (1)
- Tensile tests (1)
- Termites (1)
- Test Improvement (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Texturation (1)
- Theranostics (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal degradation (1)
- Thermal desorption mass spectrometry (1)
- Thermal stress (1)
- Thermische Analyse (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical loading (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-optical measurement (1)
- Thermoanalysis (1)
- Thermoanalytical Methods (1)
- Thermobimetal (1)
- Thermodynamic analysis (1)
- Thermodynamic stability (1)
- Thermodynamische Stabilität (1)
- Thermoelectric generator (1)
- Thermoelectric generator design (1)
- Thermoelektrika (1)
- Thermoelektrischer Generator (1)
- Thermogravimetric analysis (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Eigenschaften (1)
- Thermomechanische Ermüdung (1)
- Thermophysikalische Eigenschaften (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thesaurus (1)
- Thickening (1)
- Thin films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Time-offlight Diffraction (TOFD) (1)
- Tomography (1)
- Tools (1)
- Tooth wear (1)
- Transducers (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Two-photon-polymerization (1)
- Ultraschall (1)
- Ultrasonic Testing (1)
- Ultrasonic assited machining (1)
- Umgebungsbedingter Spannungsriss (1)
- Ungleichgewicht (1)
- Unidirectional composites (1)
- Unlegierter Baustahl (1)
- Upconversion nanoparticles (1)
- VCSEL (1)
- VM12 SHC (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Verbundwerkstoff (1)
- Verbundwerkstoffe (1)
- Vernetzung (1)
- Versetzungsstrukturen (1)
- Very high cycle fatigue (1)
- Vickers Hardness (1)
- Virtueller Materialdatenraum (1)
- Viscoelastic model (1)
- Viscose sintering (1)
- Viskoplastisch (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume Fraction (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Wasserstoff (1)
- Wasserstofferzeugung (1)
- Waste water (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Welding processing influences (1)
- Werkstoffauswahl (1)
- Werkstoffdaten (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Wet chemical etching (1)
- Wet dispersion (1)
- White light emitters (1)
- Wind turbine blade shell structures (1)
- Windkraft (1)
- Withstand voltage tests (1)
- Women in science (1)
- Work of adhesion (1)
- Workshop (1)
- Wärmespeicher (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray imaging (1)
- X-ray refractography (1)
- X-ray scattering (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRM (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- ZfP (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- Zug-Druck-Schubprüfung (1)
- Zugversuchsontologie (1)
- Zyklische Belastung (1)
- Zyklische R-Kurve (1)
- alumina (1)
- arbidic austempered ductile iron (1)
- arbon capture (1)
- ausfgallfreie Lastwechsel (1)
- battery aging mechanism (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- coarsening (1)
- condensate (1)
- current collector corrosion (1)
- dental (1)
- depth profiles (1)
- dispersion (1)
- electrochemical characterization (1)
- electron microscopy (1)
- hardness (1)
- high entropy alloys (1)
- high pressure (1)
- hydrogen storage (1)
- impurities (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- laser cladding (1)
- microstructural changes (1)
- microstructure analysis (1)
- multi scale testing (1)
- negative crystal growth (1)
- oxidation (1)
- particle size determination (1)
- phosphate glasses (1)
- pitting corrosion (1)
- sample preparation (1)
- scanning electron microscopy (1)
- selective laser melting (1)
- statistische Auswertung (1)
- sulfidation (1)
- thermomechanische Beanspruchung (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- water speciation (1)
- zertifizierte Referenzmaterialien (1)
- Überblick (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (1137)
- 5.1 Mikrostruktur Design und Degradation (338)
- 5.2 Metallische Hochtemperaturwerkstoffe (277)
- 5.4 Multimateriale Fertigungsprozesse (216)
- 5.6 Glas (151)
- 5.3 Polymere Verbundwerkstoffe (131)
- 5.5 Materialmodellierung (115)
- 8 Zerstörungsfreie Prüfung (107)
- 9 Komponentensicherheit (98)
- 7 Bauwerkssicherheit (91)
Paper des Monats
- ja (11)
Wollastonite (CaSiO 3 ) – diopside (CaMgSi 2 O 6 ) glass-ceramic scaffolds have been successfully fabricated using two different additive manufacturing techniques: powder-based 3D printing (3DP) and digital light processing (DLP), coupled with the sinter-crystallization of glass powders with two different compositions. The adopted manufacturing process depended on the balance between viscous flow sintering and crystallization of the glass particles, in turn in fluenced by the powder size and the sensitivity of CaO – MgO – SiO 2 glasses to surface nucleation. 3DP used coarser glass powders and was more appropriate for low temperature firing (800 – 900 °C), leading to samples with limited crystallization. On the contrary, DLP used finer glass powders, leading to highly crystallized glass-ceramic samples. Despite the differences in manufacturing technology and crystallization, all samples featured very good strength-to-density ratios, which bene fit theiruse for bone tissue engineering applications. The bioactivity of 3D-printed glass-ceramics after immersion in simulated body fluid and the similarities, in terms of ionic releases and hydroxyapatite formation with already validated bioactive glass-ceramics, were preliminarily assessed.
The Layerwise Slurry Deposition is a technology for the deposition of highly packed powder layers. A powder bed is achieved by depositing and drying layers of a ceramic suspension by means of a doctor blade. This deposition technique was combined with the binder jetting technology to develop a novel Additive Manufacturing technology, named LSD-print. The LSD-print was applied to a porcelain ceramic. It is shown that it was possible to produce parts with high definition, good surface finish and at the same time having physical and mechanical properties close to those of traditionally processed porcelain, e.g. by slip casting.
This technology shows high future potential for being integrated alongside traditional production of porce-lain, as it is easily scalable to large areas while maintaining a good definition. Both the Layerwise Slurry Deposition method and the binder jetting technologies are readily scalable to areas as large as > 1 m2.
A shape evolution approach based on the thermally activated self-organization of 3D printed parts into minimal surface area structures is presented. With this strategy, the present communication opposes currently established additive manufacturing strategies aiming to stipulate each individual volumetric element (voxel) of a part. Instead, a 3D structure is roughly defined in a 3D printing process, with all its advantages, and an externally triggered self-organization allows the formation of structural elements with a definition greatly exceeding the volumetric resolution of the printing process. For enabling the self-organization of printed objects by viscous flow of material, functionally graded structures are printed as rigid frame and melting filler. This approach uniquely combines the freedom in design, provided by 3D printing, with the mathematical formulation of minimal surface structures and the knowledge of the physical potentials governing self-organization, to overcome the paradigm which strictly orrelates the geometrical definition of 3D printed parts to the volumetric resolution of the printing process. Moreover, a transient liquid phase allows local programming of functionalities, such as the alignment of functional particles, by means of electric or magnetic fields.
Tricalcium phosphate (b-TCP) can be used as bone graft, exhibiting suitable bioabsorption and osteoconduction properties. The presence of silica may induce the formation of a hydroxyapatite layer, enhancing the integration between implant and bone tissue. Preceramic polymers present silicon in their composition, being a source of SiO2 after thermal treatment. Using the versatility of 3D printing, b-TCP and a polysiloxane were combined to manufacture a bulkb-TCP with a silica coating. For the additive manufacturing process, PMMA powder was used as passive binder for the b-TCP particles, and polymethylsilsesquioxane (MK), dissolved in an organic solvent, was used both as a printing binder (ink) and as the source of SiO2 for the coating. Five distinct coating compositions were printed with increasing amounts of MK. The structures were then submitted to heat treatment at 1180 °C for 4 h. XRD and FTIR showed no chemical reaction between the calcium phosphate and silica. SEM allowed observation of a silicon-based ating on the structure surface. Mechanical strength of the sintered porous structures was within the range of that of trabecular bones.
A shell test bench was developed at BAM 5.3 which allows for static and fatigue testing of curved fiber-reinforced plastic (FRP) structures, during which in-situ the damage state can be non-destructively inspected by thermography and strain-field measurement techniques. Sandwich shell specimens with typical wind turbine blade manufacturing defects were designed and tested. The tested imperfections show a fairly significant reduction (up to 90%) of the shell test specimens‘ lifetime, depending on the type of imperfection. Using the in-situ NDT methods incorporated in the shell test bench, the location and cycle time of the initial defects and the damage evolution was investigated.
A shell test bench was developed at BAM 5.3 which allows for static and fatigue testing of curved fiber-reinforced plastic (FRP) structures, during which in-situ the damage state can be non-destructively inspected by thermography and strain-field measurement techniques. Sandwich shell specimens with typical wind turbine blade manufacturing defects were designed and tested. The tested imperfections show a fairly significant reduction (up to 90%) of the shell test specimens‘ lifetime, depending on the type of imperfection. Using the in-situ NDT methods incorporated in the shell test bench, the location and cycle time of the initial defects and the damage evolution was investigated.
The described investigation of carbon-fibre-reinforced plastics (CFRP) documents that damage evolution can be observed by means of X-ray refractography. Comparative investigations with synchrotron technique on CFRP and grey-scale analysis on glass fibre-reinforced-plastics (GFRP) confirm these results. Moreover it was found that the fracture mechanical properties of the matrix system influence damage nucleation and propagation in the laminate during static and fatigue loads. Single-step fatigue tests were carried out on Laminates with RIM135 and LY556 matrix systems made from non-crimped fabric (NCF) or twill weave in different fibre orientations. The damage to the LY556 laminates was characterized by laminate cracks growing rapidly over the whole specimen width, whereas the damage on the RIM135 laminates was characterized by an earlier onset of micro-cracking followed by laminate cracks. The specimens were fatigued up to 108 (very high cycle fatigue (VHCF) regime) load cycles. S-N-curves of damage initiation were drawn and boundaries were identified for endurance within the VHCF regime. A phenomenology based model focusing on matrix stress was applied to reproduce the first inter-fibre failure (IFF) under static and fatigue loads.
Fiber-reinforced-polymers (FRPs) are in current research focus in the lightweight construction industry, because of their extraordinary characteristics (stiffness and strength-to-density relation). The structure of polymer matrix and the interaction with reinforcement are crucial for optimization of the mechanical and thermal properties of FRPs. Due to the macromolecular chain structure, the mechanical properties of a polymer strongly vary with temperature: Below the glass transition, the chain segments of a polymer are “frozen”. Regarding fracture, the total changed energy during fracture if only dissipates for the generation of the new surfaces. However, in the region of the glass transition, the polymer chain segments start to get “unfrozen”, and the energy is not only required for generating new surfaces, but also for irreversibly deformation. This irreversible deformation is affected by the global temperature and the local temperature near the crack tip, which is affected by the local strain rate and crack propagation velocity.
Hence, in this research project, the irreversible deformation of neat and reinforced polymers will be controlled by changing the global temperature as well as the local temperature. With using different fracture experiments, the amount of energy required for creating new surfaces and for the irreversible deformation will be separated. The fracture tests include the conventional tensile test, the macroscopic peel test and the single fiber peel – off test.
Temperature-induced, stress-induced martensitic phase transitions and martensite reorientation process in Ni rich (50.9 at.%) NiTi pseudoelastic NiTi wires with ultra-fine grained (UFG) microstructure were studied by electrical resistance measurements. Measurements of the electrical resistance as a function of temperature at different constant mechanical loads accompanied by complementary experiments with variable loads at constant temperature were performed. Results show that the transformation mechanisms in UFG microstructures exhibit a higher level of complexity when compared with those characterizing the behavior of other microstructures (e.g., recrystallized or larger grains size). It was found that a threshold stress level below 150 MPa delimits the transition from a homogeneous (low stress) to localized but reversible Lüders type transformation (high stress) when the transformations are induced under constant applied stress and that reorientation processes require stresses of 100 MPa in the present UFG wires. Even though the strain evolutions do not always show two distinct yielding events during cooling or heating, electrical resistance measurements proved that a two-step transformation involving R-phase and B19' martensite was always present in the extended range of temperatures and stresses investigated here.
Calciumcobaltit und Calciummanganat gehören zu den vielversprechendsten thermoelektrischen Oxiden im Temperaturbereich zwischen 600 °C und 800 °C an Luft. Mittels thermoelektrischer Generatoren kann ein Temperaturgradient direkt in elektrische Leistung umgewandelt werden. Für die kostengünstige Pulverherstellung von Funktionsmaterialien wird im industriellen Maßstab meist die Festphasenreaktion (bzw. Kalzinierung) verwendet. Da es sich dabei um einen Hochtemperaturprozess handelt, ist diese Kalzinierung sehr energieintensiv. In der Literatur werden sehr unterschiedliche Prozessbedingungen zur Pulversynthese thermoelektrischer Oxide genutzt. Soweit dem Autor bekannt, ist keine systematische Untersuchung des Einflusses der Pulversynthesebedingungen auf die thermoelektrischen Eigenschaften publiziert.
Deshalb wurde eine systematische Untersuchung des Einflusses der Pulversynthesebedingungen (Temperatur, Haltezeit, Partikelgröße, Wiederholungen) auf die thermoelektrischen Eigenschaften von Calciumcobaltit und Calciummanganat durchgeführt.
Es konnte gezeigt werden, dass sich ein höherer Energieeintrag während der Kalzinierung negativ auf die thermoelektrischen Eigenschaften auswirkt.
Having been introduced almost two decades ago, Additive Manufacturing (AM) of metals has become industrially viable for a large variety of applications, including aerospace, automotive and medicine. Powder bed techniques such as Selective Laser Melting (SLM) based on layer-by-layer deposition and laser melt enable numerous degrees of freedom for the geometrical design. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The residual stress distribution in IN718 elongated prisms produced by SLM was studied non-destructively by means of neutron (bulk) and laboratory X-ray (surface) diffraction. The samples with different scanning strategies, i.e. hatching length, were measured in as-build condition (on a build plate) and after removal from the build plate.
The absolute values of all stress components decreased after removal from the build plate. Together with surface scan utilizing a coordinate-measuring machine (CMM), it is possible to link the stress release to the sample distortion. Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component depending on the thermal gradient in the respective direction.
Having been introduced almost two decades ago, Additive Manufacturing (AM) of metals has become industrially viable for a large variety of applications, including aerospace, automotive and medicine. Powder bed techniques such as Selective Laser Melting (SLM) based on layer-by-layer deposition and laser melt enable numerous degrees of freedom for the geometrical design. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The residual stress distribution in IN718 elongated prisms produced by SLM was studied non-destructively by means of neutron (bulk) and laboratory X-ray (surface) diffraction. The samples with different scanning strategies, i.e. hatching length, were measured in as-build condition (on a build plate) and after removal from the build plate.
The absolute values of all stress components decreased after removal from the build plate. Together with surface scan utilizing a coordinate-measuring machine (CMM), it is possible to link the stress release to the sample distortion. Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component depending on the thermal gradient in the respective direction.
Different imaging techniques were employed to monitor Full Notch Creep Test (FNCT) experiments addressing environmental stress cracking in more detail. The FNCT is a well-established test method to assess slow crack growth and environmental stress cracking of polymer materials, especially polyethylene. The standard test procedure, as specified in ISO 16770, provides a simple comparative measure of the resistance to crack growth of a certain material based on the overall time to failure when loaded with a well-defined mechanical stress and immersed in a liquid medium promoting crack propagation.
Destructive techniques which require a direct view on the free fracture surface, such as light microscopy and laser scanning microscopy, are compared to non-destructive techniques, i.e. scanning acoustic microscopy and xray micro computed tomography. All methods allow the determination of an effective crack length. Based on a series of FNCT specimens progressively damaged for varied Durations under standard test conditions, the estimation of crack propagation rates is also enabled. Despite systematic deviations related to the respective Imaging techniques, this nevertheless provides a valuable tool for the detailed evaluation of the FNCT and its further development.
The creep behavior of single crystals of the nickel-based superalloy CMSX-4 was investigated at 1288 °C, which is the temperature of the hot isostatic pressing treatment applied to this superalloy in the industry. It was found that at this super-solvus temperature, where no gammaPrime-strengthening occurs, the superalloy is very soft and rapidly deforms under stresses between 4 and 16 MPa. The creep resistance was found to be very anisotropic, e.g., the creep rate of [001] crystals was about 11 times higher than that of a [111] crystal. The specimens of different orientations also showed a very different necking behavior. The reduction of the cross-sectional area psi of [001] crystals reached nearly 100 pct, while for a [111] crystal psi = 62 pct. The EBSD analysis of deformed specimens showed that despite such a large local strain the [001] crystals did not recrystallize, while a less deformed [111] crystal totally recrystallized within the necking zone. The recrystallization degree was found to be correlated with deformation behavior as well as with dwell time at high temperature. From the analysis of the obtained results (creep anisotropy, stress dependence of the creep rate, traces of shear deformation, and TEM observations), it was concluded that the main strain contribution resulted from <01-1>{111} octahedral slip.
Die Festigkeit von Gläsern wird durch die Oberflächenqualität beeinflusst. Kommt es neben dem Auftreten von Defekten zusätzlich zum Risswachstum ausgehend hiervon, wird die Festigkeit minimiert. Das Wachstum hängt dabei maßgeblich von der Luftfeuchtigkeit ab. Dieses Ermüdungsverhalten von Gläsern besser zu verstehen und dabei die Mechanismen und den Einfluss von im Volumen eingebauten Wasser auf das unterkritische Risswachstum zu untersuchen, ist Ziel der Arbeiten. Als Teilprojekt im Rahmen des DFG Schwerpunktprogramms SPP 1594 „Ultrastrong glasses“ soll der Einfluss des im Volumen eingebauten Wassers auf die Rissspitze untersucht werden. Zusammen mit der Leibniz Universität Hannover und der TU Clausthal werden hierfür hochwasserhaltige Gläser (bis zu 8 Gew%) bei 8 kbar über die Flüssigphase synthetisiert, die makroskopisch den hohen Wasseranteil nachstellen. Die Charakterisierung erfolgt hinsichtlich des Wassereinbaus, der mechanischen Eigenschaften und des Risswachstums. Die Arbeiten in Berlin beziehen sich hierbei auf die Messungen des unterkritischen Risswachstums in Luft und Vakuum, sowie Verlustwinkelmessungen.
Erste Ergebnisse zeigen Unterschiede im korrosionsbeeinflussten (langsames) und inerten (schnelles und im Vakuum stattfindendes) Risswachstumsverhalten der untersuchten Gläsern. Die Rissgeschwindigkeit beim Übergang vom korrosionsbeeinflussten zum inerten Risswachstum ist hin¬gegen für alle Gläser ähnlich und folglich ein kinetisch durch den äußeren Wassertransport an die Rissspitze bestimmter Prozess. Der Widerstand gegen Risswachstum steigt mit Tg und zusätzlich kann anhand der Verlustwinkelmessungen ein Zusammenhang zwischen der Netzwerk- und der β-Relaxation ermittelt werden. Je höher der Wassergehalt im Glas ist, desto niedriger wird Tg und einfacher das Risswachstum, welches sich durch längere Risse kennzeichnet. Besonders stark tritt dieser Effekt bei einem Überschuss an molekularem Wasser auf.
Premature failure of glass under load is caused by sub-critical crack growth (SCCG) originate from microscopic flaws at the surface. While SCCG is related to the humidity of the ambient atmosphere, leading to stress corrosion phenomena at the crack tip, the detailed mechanism and the effect of different network formers are still not fully understood. For more clarity, various soda silicate glasses with a second network former were investigated by double cantilever beam technique: Na2O*Al2O3*SiO2 (NAS), Na2O*B2O3*SiO2 (NBS), Na2O*PbO*SiO2 (NPbS).
Three effects on the crack growth velocity, v, versus stress intensity, KI, curves were found out. The slope in region I, which is limited by corrosion, increases in the order NAS < NBS ≲ NPbS. The velocity range of region II reflecting the transition between corrosion effected and inert crack growth (region III), varies within one order of magnitude between the glasses. The KI region of inert crack growth strongly scatters between 0.4 and 0.9 MPam1/2. For comparison, crack growth at different humidity in commercial soda lime silicate glass (NCS) was measured.
Statistical analysis of Vickers induced subcritical crack growth in soda-lime silicate glasses
(2018)
Studies on Vickers induced subcritical crack growth are controversially discussed since the stresses that drive the crack growth are distributed three dimensionally within the material and cannot be retraced by available methods. Hence, empirical approaches are used to calculate mechanical material parameters such as the stress intensity factor KI. However, the results of these approaches show large deviations from those measured by standardized techniques such as double cantilever beam (DCB) or double cleavage drilled compression (DCDC). Yet, small specimen sizes and low specimen quantities can prevent the execution of DCB and DCDC measurements. Here we present an approach that is based on a statistical analysis of Vickers induced radial cracks. For this purpose more than 150 single radial cracks were analyzed. The cracks were generated in a commercial soda-lime silicate glass. The experiments were performed in a glovebox purged with dry nitrogen gas to minimize the influence of atmospheric water on crack growth. The temporally resolved evolution of the radial cracks was monitored in-situ using an inverted microscope equipped with a camera system directly below the Vickers indenter. An automated image analysis software was used to determine the crack length over time. The data show that the crack propagation and thereby the crack velocities are not uniformly but statistically distributed. These findings allow, using the statistical mean value of the distributions in combination with DCB data, a precise formulation of KI for each measured crack length.
The presence of water in the surrounding atmosphere of a propagating crack has a major influence on the subcritical crack growth. While these external phenomena are well understood, there is still a lack of knowledge on the influence of structurally bound water on crack propagation. Thus, our recent study aims on the analysis of crack propagation in water bearing soda-lime silicate glasses with up to 8 wt.% water. The samples were synthesized in an internally heated pressure vessel at 0.5 GPa. Since this preparation route limits the sample sizes, standard test geometries allowing for the determination of stress intensity factors, such as double cantilever beam, are not feasible. Thus, radial cracks in the hydrous glasses were initiated by Vickers indentation and crack growth was simultaneously captured with a camera system. An automated image analysis algorithm was used for the analysis of the crack length of each single video frame. To minimize influences by atmospheric water, all experiments were conducted in a glovebox purged with dry N2. About 150 cracks per glass composition were analyzed to provide statistical significance of the Vickers-induced SCCG. The results show that structurally bound water has a major influence on SCCG by means of crack lengths, growth rates and time of crack initiation.
Der Vortrag gibt eine Einführung in die Methode der Vakuumheißextraktion und beschreibt die Anwendungsmöglichkeiten der an der BAMN betriebenen Anlage.
Giant magneto-resistive (GMR) sensor based metal magnetic memory (MMM) technique is proposed for mapping of deformation-induced self-magnetic leakage fields (SMLFs) in carbon steel. The specimens were subjected to different amounts of tensile deformation and the deformation-induced SMLFs were measured using a GMR sensor after unloading the specimens. 3D-nonlinear finite element modeling was performed to predict stress–strain state in a steel specimen under tensile load. The experimentally obtained SMLF images were correlated with the finite element model predicted stress–strain states. Studies reveal that the MMM technique can detect the plastic deformation with signal-to-noise ratio better than 20 dB. The technique enables the mapping of plastic deformation in carbon steels for the evaluation of the severity of deformation. The study also reveals that deformation-induced SMLF is influenced by the presence of initial surface residual stress, introduced by shot peening. The intensity of SMLF signal is found to increase with increase in tensile load and decrease with shot peening.
Dissolved water decisively influences numerous thermally activated relaxation phenomena in glasses like stress relaxation, sub-critical crack growth, internal friction, viscosity, sintering, and crystallization. Thermoanalytical methods can essentially help for better understanding of these phenomena. The lecture introduces the Vacuum Hot Extraction method (VHE) and illustrates its possibilities for measuring water content, degassing and mobility. As another thermoanalytical method, the Dynamic Mechanical Themoanalysis (DMA), allowing to study the effect of dissolved water on the internal friction in glasses, is introduced.
Wasser in Silicatglas
(2018)
Glass powders are promising candidates for manufacturing a broad diversity of sintered materials like sintered glass-ceramics, glass matrix composites or glass bonded ceramics with tailored mechanical, thermal, electrical and optical properties and complex shape. Its wide and precise adjustability makes this class of materials a key component for advanced technologies. Processing of glass or composite powders often allow even more flexibility in materials design. At the same time, however, processing can have substantial effects on the glass powder surface and sinterability. Thus, mechanical damage and surface contamination can strongly enhance surface crystallization, which may retard or even fully prevent densification. Whereas sintering and concurrent crystallization have been widely studied, partially as cooperative effort of the TC7 of the ICG, and although glass powder sintering is predominantly applied for glasses of low crystallization tendency, sintering is also limited by gas bubble formation or foaming. The latter phenomenon is much less understood and can occur even for slow crystallizing glass powders. The lecture illustrates possible consequences of glass powder processing on glass sintering, crystallization and foaming.
In Germany spent nuclear fuel and high level radioactive waste is stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. The used metal seals consist of three components as can be seen in the cross-sectional view in Figure 1. The innermost part is a helical spring that is surrounded by an inner jacket made of stainless steel. The outer jacket that is made of a softer material which in case of assembly in the aforementioned storage containers is silver or aluminum (i.e. Al 99.5). During application the seal is compressed and due to the restoring force of the helical spring, the outer jacket is plastically deformed and adapts to the sealing surface. Hence, leakage paths are closed and the sealing function is generated. In Germany the above-mentioned containers are licensed for up to 40 years of interim storage, which in case extended storage becomes necessary before a final repository is available will have to be extended to even longer periods. Therefore, the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads as well.
At Bundesanstalt für Materialforschung und –prüfung (BAM) long-term investigations are being conducted in which seals are assembled in test flanges and aged at temperatures ranging from room temperature to 150°C for accelerated aging. The aged seals are tested semi-annually (after the first 6 months in which the seals are tested more frequently) regarding the sealing performance, the remaining seal force, and the useable resilience upon decompression. Results of these investigations have been published over the past years (e.g. Grelle, Wolff, Probst, Jaunich, & Völzke, 2017; Völzke, Wolff, Probst, Nagelschmidt, & Schulz, 2014). It was found that the seal force and the useable resilience decrease with time and temperature, which is in agreement with the result of other studies (Sassoulas et al., 2006; Wataru et al., 2016) as well. Geometry change of the outer jacket has been identified as the main reason for this seal behavior. At the prevailing operating temperatures and stresses the aluminum is subjected to creep deformation leading to a thinning of the outer jacket. Since the seal groove depth remains unchanged the helical spring expands, which in turn leads to a decrease of the generated spring and seal force.
Although the main reason for the change of seal parameters over time and temperature is known, a detailed characterization of the seal behavior and a reliable prediction of the parameter development for aging times that exceed the experimental time frame have not been possible, yet.
For deeper understanding of the aging processes, an Investigation program, which is covered in this contribution, is conducted at Bundesanstalt für Materialforschung und –prüfung (BAM) that focusses on the behavior of the aluminum jacket and its influence on the long-term sealing performance. The program investigates properties of material samples as well as the behavior of the seal as a component.
Original sheet material of the same aluminum that is used for manufacturing of the seals is investigated in compression creep tests. For this, a DMA (dynamic mechanical analysis) machine is employed (here used for static tests) that allows for a measurement of the specimens deformation under forces of up to 500 N. The advantage of this method is that the original material can be tested in the same shape as used for the seals which is 0.5 mm thick sheet material. For investigation of tensile creep standard specimens are used, that were machined from surrogate material of the same composition and annealing condition.
Furthermore, aluminum seals that are cut into smaller segments are assembled in flanges and placed in heating chambers at temperatures ranging from 23°C to 150°C. After different periods of time from 3 days to 300 days the segments are taken out of the flanges and are investigated, thus giving information on different states of aging. Measurements of the development of the seal contact width and the aluminum jacket thickness are done with an optical microscope. Further investigations on the segments will include metallography and hardness measurements.
From the detailed material and component behavior including the results of the long-term seal force and useable resilience investigations a better understanding of the overall seal behavior can be gained. The aim is to contribute to the development of material models and analytical approaches for the prediction of the sealing behavior in dependence of time and temperature.
Common air-coupled transducers for non-destructive testing consist of a piezocomposite material and several matching layers. Better acoustical matching to air is achieved by transducers based on charged cellular polypropylene (PP). This material has about hundred times lower acoustic impedance than any piezocomposite, having about the same piezoelectric coefficient. The piezoelectric properties of cellular PP are caused by the polarization of air cells. Alternatively, a ferroelectret receiver can be understood as a capacitive microphone with internal polarization creating permanent internal voltage. The sensitivity of the receiver can be increased by applying additional bias voltage. We present an ultrasonic receiver based on cellular PP including a high-voltage module providing bias voltage up to 2 kV. The application of bias voltage increased the signal by 12 to 15 dB with only 1 dB increase of the noise.
This receiver was combined with a cellular PP transmitter in through transmission to inspect several test specimens consisting of glass-fiber-reinforced polymer face sheets and a porous closed-cell PVC core. These test specimens were inspected before and after load. Fatigue cracks in the porous PVC core and some fatigue damage in the face sheets were detected. These test specimens were originally developed to emulate a rotor blade segment of a wind power plant. Similar composite materials are used in lightweight aircrafts for the general aviation. The other inspected test specimen was a composite consisted of glass-fiber-reinforced polymer face sheets and a wooden core. The structure of the wooden core could be detected only with cellular PP transducers, while commercial air-coupled transducers lacked the necessary sensitivity. Measured on a 4-mm thick carbon-fiber-reinforced polymer plate, cellular PP transducers with additional bias voltage achieved a 32 dB higher signal-to-noise ratio than commercial air-coupled transducers.
Common air-coupled transducers for non-destructive testing consist of a piezocomposite material and several matching layers. Better acoustical matching to air is achieved by transducers based on charged cellular polypropylene (PP). This material has about hundred times lower acoustic impedance than any piezocomposite, having about the same piezoelectric coefficient. The piezoelectric properties of cellular PP are caused by the polarization of air cells. Alternatively, a ferroelectret receiver can be understood as a capacitive microphone with internal polarization creating permanent internal voltage. The sensitivity of the receiver can be increased by applying additional bias voltage. We present an ultrasonic receiver based on cellular PP including a high-voltage module providing bias voltage up to 2 kV. The application of bias voltage increased the signal by 12 to 15 dB with only 1 dB increase of the noise.
This receiver was combined with a cellular PP transmitter in through transmission to inspect several test specimens consisting of glass-fiber-reinforced polymer face sheets and a porous closed-cell PVC core. These test specimens were inspected before and after load. Fatigue cracks in the porous PVC core and some fatigue damage in the face sheets were detected. These test specimens were originally developed to emulate a rotor blade segment of a wind power plant. Similar composite materials are used in lightweight aircrafts for the general aviation. The other inspected test specimen was a composite consisted of glass-fiber-reinforced polymer face sheets and a wooden core. The structure of the wooden core could be detected only with cellular PP transducers, while commercial air-coupled transducers lacked the necessary sensitivity. Measured on a 4-mm thick carbon-fiber-reinforced polymer plate, cellular PP transducers with additional bias voltage achieved a 32 dB higher signal-to-noise ratio than commercial air-coupled transducers.
Virtual-lab-based determination of a macroscopic yield function for additively manufactured parts
(2018)
This work presents a method for the yield function determination of additively manufactured parts of S316L steel. A crystal plasticity model is calibrated with test results and used afterwards to perform so-called virtual experiments, that account for the specific process-related microstructure including crystallographic and morphological textures. These simulations are undertaken on a representative volume element (RVE), that is generated from EBSD/CT-Scans on in-house additively manufactured specimen, considering grain structure and crystal orientations. The results of the virtual experiments are used to determine an anisotropic Barlat yield function, that can be used in a macroscopical continuum-sense afterwards. This scale-bridging approach enables the calculation of large-scale parts, that would be numerically too expensive to be simulated by a crystal plasticity model.
Here we demonstrate that by applying exclusively Martian resources a processing route involving suspensions of mineral particles called slurries or slips can be established for manufacturing ceramics on Mars. We developed water-based slurries without the use of additives that had a 51 wt. % solid load resembling commercial porcelain slurries in respect to the particle size distribution and rheological properties. These slurries were used to slip cast discs, rings and vases that were sintered at temperatures between 1000 and 1130 °C using different sintering schedules, the latter were set-up according the results of hot-stage microscopic characterization. The microstructure, porosity and the mechanical properties were characterized by SEM, X-ray Computer tomography and Weibull analysis. Our wet processing of minerals yields ceramics with complex shapes that show similar mechanical properties to porcelain and could serve as a technology for future Mars colonization. The best quality parts with completely vitrificated matrix supporting a few idiomorphic crystals are obtained at 1130 °C with 10 h dwell time with volume and linear shrinkage as much as ~62% and ~17% and a characteristic compressive strength of 51 MPa.
The employment of renewable energy resources, which are naturally intermittent, for electricity generation has altered the working conditions of conventional power plants from continuous (baseload) to cyclic or flexible operation. For a long time, 9-12% Cr ferritic-martensitic stainless steels have been widely used in power plants due to their favorable characteristics such as high creep strength at high temperatures and oxidation and corrosion resistance. The components of power plants are subjected to long term cyclic loadings including fatigue and creep-fatigue at high temperatures. As ferritic-martensitic steels are known to exhibit cyclic softening when subjected to such loading scenarios, it is crucial to study the material response in such conditions. Since it is impossible to test the material behavior exactly as the operation conditions of power plants, due to technical difficulties and cost issues, it is necessary to develop physically-based material models that can predict the material behavior in more realistic situations.
In recent years, many material models have been proposed to describe the behavior of 9-12% Cr ferritic-martensitic stainless steels, which follow phenomenological or physically-based approaches. Phenomenological models provide a stress-strain relation based on empirical observations although they usually lack physical background. To alleviate this drawback and to allow for more flexibility and wider ranges of strain-rate and temperature, physically-based models are suggested. In this approach, microstructural evolution, dislocation movement and/or kinetics of plastic deformation processes are included. The physically-based models allow for a better extrapolation from the experiment results to other operation conditions and their material constants can be interpreted physically. Compared to the former approach, the material behavior can be described more accurately and flexibly and the number of material constants is less in general. In the presented work, the existing micromechanical models developed for P92 steel are compared and extended to allow for new dislocation-based strengthening/cyclic mechanisms. Their performance is assessed in the light of mechanical test data from creep-fatigue and thermo-mechanical fatigue experiments and detailed characterizations of the microstructure evolution in the fatigued material.
For years there have been more and more reports on the presence of drugs in the aquatic environment. Due to the demographic change, the consumption of pharmaceuticals has risen sharply. After taking the drugs, they are partly metabolized in the human body. However, the metabolism is not complete so that both the metabolites and non-metabolized amounts of the parent compounds are excreted. These compounds reach the waste water and afterwards the sewage treatment plants. In sewage treatment plants transformation products can be formed by the oxidative conditions during wastewater treatment processes. The transformation products may have a higher toxicity than the actual environmental pollutants and are often only partly removed during the waste water treatment. Since a lot of these compounds are still unknown, the transformation products are not detected by target analysis used in sewage treatment plants and are often released undetected in the aquatic ecosystems. The released substances may be subject to additional transformation processes in the environment. Pharmaceuticals produced in high amounts can be already detected in the μg/L range in water bodies worldwide.
Metformin and its major transformation product guanylurea are one of the main representatives. Metformin is the drug of choice for treating type 2 diabetes. The drug therapy for diabetes mellitus has increased significantly in recent years. In the year 2015 1500 tons of metformin were prescribed in Germany (for statutory insured persons). Metformin is not metabolized in the human body and is excreted unchanged therefore concentrations between 57 μg/L and 129 μg/L are found in German waste water treatment plants influents.
In this work the transformation of the antidiabetic drug metformin is investigated. The degradation of metformin is initialize by commercial water treatment techniques like UV-radiation or noncommercial techniques like heterogenous photocatalysis based on titanium dioxide. The degradation of metformin and resulting transformation products are analyzed by LC-MS/MS and LC-HRMS.
A constitutive model for the mechanical behaviour of single crystal Ni-base superalloys under high temperature conditions has been developed in the framework of a Cooretec project in cooperation with Siemens AG, MTU Aero Engines AG and University Bayreuth. In addition to the conventional material properties e.g. elastic constants, the model requires the parameters of the initial microstructure as an input. Thus, the γ’-precipitate size and the channel width of the γ-matrix were obtained from SEM micrographs. The model uses the slip system theory and describes the movement, multiplication and annihilation of dislocations in the channels. Furthermore, the cutting of precipitates is another mechanism contributing to the plastic flow. The evolution of the morphology due to rafting and its effects on the deformation have been implemented according to. The kinematic hardening is introduced as a stress tensor to realistically represent the strain hardening of arbitrary oriented single crystals.
The mechanical behaviour of single crystal specimens has been experimentally investigated in tension tests at different strain rates and in creep tests under various loads. The constitutive model has been calibrated based on the experimental data for temperatures of 950°C and 850°C and the [001] and [111] crystallographic orientations.
Finally, a micromechanical model was created to simulate the creep response of additive manufactured polycrystalline structures. An EBSD image is taken to obtain the grain geometry and their respective orientation. The grain boundaries are discretised using cohesive elements, whereas the single crystal model was applied to each grain in the representative volume. The polycrystal model is generated using Dream3D, NetGen and other software previously developed at the BAM.
Environmental conditions are known to influence sub-critical crack growth (SCCG) that are released from microscopic flaws at the glass surface, leading to stress corrosion phenomena at the crack tip. The processes at the crack-tip are complex and water has been identified as a key component governing SCCG at low crack velocities (region I). In particular, the influence of humidity accelerating crack propagation is well studied for industrial soda-lime silicate glasses, which are practically free (< 1000 ppm) of dissolved water. To shed light on the corrosion process, the situation at the crack-tip is reversed in the present study as dissolved water in larger fractions is present in the glass and crack propagation is triggered in dry environment. For this purpose, water-bearing silicate glasses of up to 8 wt% total water were synthesized in an internally heated pressure vessel at 0.5 GPa and compared to dry glasses of standard glass manufacturing. SCCG was measured using the double cantilever beam technique and by Vickers indentation. For dry glasses, three trends in the crack growth velocity versus stress intensity curve were found. The slope in region I limited by environmental corrosion increases in the order sodium aluminosilicate < sodium borosilicate ≲ sodium lead silicate. The velocity range of region II reflecting the transition between corrosion affected and inert crack growth (region III), varies within one order of magnitude among the glasses. The KI region of inert crack growth strongly scatters between 0.4 and 0.9 MPam1/2. For hydrous glasses, it is found that those of low Tg are more prone to SCCG. As water strongly decreases Tg, it promotes SCCG. First results indicate that molecular water has a dominating influence on SCCG.
Effective hydrogen storage capacities are prerequisite for an efficient energy provision using fuel cells. Since glass has low intrinsic hydrogen permeability, it is a promising material for hydrogen storage containers as well as hydrogen diffusion barriers. Previous studies on oxidic glasses suggest a correlation between the glass composition and hydrogen permeation that was derived mainly from silica glass. In the present study, we concentrate on the relationship between thermodynamic (i.e., configurational entropy) and topologic (i.e., free volume, network polymerization) parameters. Experimental data were gathered well below the glass transition temperature, excluding significant effects caused by structural relaxation and chemical dissolution of hydrogen. The results of seven analysed glasses on the SiO2-NaAlO2 joint showed that the hydrogen permeability in fully polymerized glasses cannot solely be derived from the total free volume of the glass structure. Hence, evidence is provided that the size distribution of free volume contributes to hydrogen solubility and diffusion. Additionally, the results indicate that the configurational heat capacity ΔCp at Tg affects the hydrogen permeability of the investigated glasses.
Glass-fibre-reinforced plastics (GFRP) are commonly used for the construction of pressure vessels and tanks for example in automotive and aerospace industries. Especially for pressure vessels used for the storage of natural gas or hydrogen with operation pressures up to 700 bar, an early material fatigue detection is of great interest. Measuring the distributed strain profile of GFRP structures helps to understand and detect material fatigue. In this article, we demonstrate the great potential of swept wavelength interferometry (SWI) based distributed strain sensing for the monitoring of pressure vessels made from GFRP. A resin transfer molding (RTM) process was used to manufacture GFRP-tube specimens. Commercial optical fibres with polyimid coating were glued to the surface externally in circumferential and axial direction. A cyclic load of up to 150 bar was applied to the samples using a servo-hydraulic test bench. Comparing the loaded and unloaded test conditions, we determined up to 2 % elongation in circumferential direction. We demonstrate reliable distributed strain measurements with sub-centimetre spatial resolution. By monitoring these high-resolution strain profiles, we were able to detect local material degradation that manifested itself as localized strain changes. Crucially, the material Degradation could be detected already after 75 % of dat the fatigue life before a crack appeared that led to leakage.
The first documentation of fuel biodeterioration dates back to the late 19th century. However, extensive studies concerning the microbial fuel contamination started in 1980’s. Polymeric fuel storage tanks containing diesel and biodiesel provide environmental conditions for microbial growth. Several studies demonstrated that bacteria, which were found in contaminated fuel systems, can use fuels as macronutrient; but such bacteria can also cause microbiologically influenced corrosion and fouling.
The aim of this study is to investigate the initial attachment behavior of bacteria, isolated from a diesel contamination, on neat and photooxidized high-density polyethylene (PE-HD). Two common PE-HD’s, less- and biodiesel-stabilized, were radiated to UV light representing a tank exposed to sunlight. The effect of photooxidiation on PE-HD’s surface were characterized chemically by Fourier-transform infrared spectroscopy (FTIR). The attached bacteria Pseudomonas aeruginosa and Bacillus subtilis on the polymer surface were evaluated by fluorescence microscopy and colony-forming unit tests (CFU).
PE-HD as a polymeric fuel storage tank material: Photooxidation, fuel sorption and long-term storage
(2018)
High-density polyethylene (PE-HD) is a commodity thermoplastic polymer which is typically used for packing of dangerous goods. Its good resistance against photooxidation, fuels, chemicals and other environmental factors in addition to low production costs makes PE-HD attractive for fuel storage applications. Typical engine fuels stored in polymer tanks are petrol, diesel and biodiesel that receives increasing attention as proper alternative to fossil fuels. One of the major problems with biodiesel is its susceptibility to oxidize due to its chemical composition of unsaturated fatty acids which also can cause polymer degradation.
The aim of this study is to investigate the influence of different environmental factors, UV radiation and commonly stored fuels, on the mechanical, physical and chemical properties of two types of PE-HD polymers (stabilized and non-stabilized). The influence on the mechanical properties was tested by Charpy and tensile tests, chemical and physical properties were evaluated by Fourier-transform infrared spectroscopy (FTIR) and by dynamical mechanical analysis (DMA) tests. Samples were characterized after varying exposure time of UV radiation and after fully and partially immersion in biodiesel. In addition, similar experiments were conducted using diesel for comparison.
We invented the first non-metallic, self-adhesive and dry biosignalling electrode. The PEDOT polymer electrode changes its aggregate state and conductivity by a light curing procedure. The electrode can be applied as a gel underneath hair without shaving. With the aid of blue light, the electrode can be hardened within a few seconds at the desired location on the scalp. The cured polymer electrode is highly conductive and can be applied on a very small location. Unlike other EEG electrodes, our electrode does not lose conductivity upon drying. Furthermore, our electrode strongly bonds to Skin and does not require any additional adhesive. Short circuits due to an outflow of gel are prevented with this technique. Therefore, the PEDOT polymer electrode is extremely well suited for applications that, up to now, have been challenging, such as non-invasive EEG recordings from awake and freely moving animals, EEG recordings from preterm babies in the neonatal intensive care unit or long-term recordings in the case of sleep monitoring or epilepsy diagnostics. We addressed two technical questions in this work. First, is the EEG recorded with polymer electrodes comparable to a standard EEG? Second, is it possible to record full-band EEGs with our electrodes?
Additive Manufacturing (AM) through the Selective Laser Melting (SLM) route offers ample scope for producing geometrically complex parts compared to the conventional subtractive manufacturing strategies. Nevertheless, the residual stresses which develop during the fabrication can limit application of the SLM components by reducing the load bearing capacity and by inducing unwanted distortion, depending on the boundary conditions specified during manufacturing. The present study aims at characterizing the residual stress states in the SLM parts using different diffraction methods. The material used is the nickel based superalloy Inconel 718. Microstructure as well as the surface and bulk residual stresses were characterized. For the residual stress analysis, X-ray, synchrotron and neutron diffraction methods were used. The measurements were performed at BAM, at the EDDI beamline of -BESSY II synchrotronand the E3 line -BER II neutron reactor- of the Helmholtz-Zentrum für Materialien und Energie (HZB) Berlin. The results reveal significant differences in the residual stress states for the different characterization techniques employed, which indicates the dependence of the residual state on the penetration depth in the sample. For the surface residual stresses, longitudinal and transverse stress components from X-ray and synchrotron agree well and the obtained values were around the yield strength of the material. Furthermore, synchrotron mapping disclosed gradients along the width and length of the sample for the longitudinal and transverse stress components. On the other hand, lower residual stresses were found in the bulk of the material measured using neutron diffraction. The longitudinal component was tensile and decreased towards the boundary of the sample. In contrast, the normal component was nearly constant and compressive in nature. The transversal component was almost negligible. The results indicate that a stress re-distribution takes place during the deposition of the consecutive layers. Further investigations are planned to study the phenomenon in detail.
The creep behavior of single-crystals of the nickel-base superalloy CMSX-4 was investigated at 1288°C, which is the temperature of the hot isostatic pressing (HIP) treatment applied to this superalloy in the industry. It was found that at this super-solvus temperature, where no Gamma’-strengthening occurs, the superalloy is very soft and rapidly deforms under stresses between 4 and 16 MPa. The creep resistance was found to be very anisotropic, e.g. the creep rate of [001] crystals was about 11 times higher than that of a [111] crystal. The specimens of different orientations also showed a very different necking behavior. The reduction of the cross-section area psi of [001] crystals reached nearly 100%, while for a [111] crystal psi=62%. The EBSD analysis of deformed specimens showed that despite such a large local strain the [001] crystals didn’t not recrystallize, while a less deformed [111] crystal totally recrystallized within the necking zone. From the shape of deformed specimens and TEM investigations it was concluded that the main strain contribution resulted from <011> {111} octahedral slip.
Efficient energy provision using fuel cells requires effective hydrogen storage capacities. Glass is a material of low intrinsic hydrogen permeability and is therefore a promising material for hydrogen storage containers or diffusion barriers. Pioneer work on oxidic glasses seems to indicate a correlation between glass composition and hydrogen permeation, which was mainly derived from the behavior of silica glass. In this study, we focus on the relationship between topologic (free volume; network polymerization) and thermodynamic (configurational entropy) glass parameters. Experiments were performed well below the glass transition temperature, which excludes significant structural relaxation and chemical dissolution of hydrogen. The compositional dependence of seven glasses on the SiO2-NaAlO2 join pointed out that in fully polymerized glasses the H2 permeability cannot be solely derived from the total free volume of the glass structure. Hence, evidence is provided that the size distribution of free volume contributes to hydrogen diffusion and solubility. Additionally, results indicate that hydrogen permeability of the glasses is affected by the configurational heat capacity ΔCp at Tg.
Glass-ceramics are noted for their unusual combination of properties and manifold commercialized products for consumer and specialized markets. Evolution of novel glass and ceramic processing routes, a plethora of new compositions, and unique exotic nano- and microstructures over the past 60 years led us to review the Definition of glass-ceramics. Well-established and emerging processing methods, such as co-firing, additive manufacturing, and laser patterning are analyzed concerning the core requirements of processing glass-ceramics and the Performance of the final products. In this communication, we propose a revised, updated definition of glass-ceramics, which reads “Glass-ceramics are inorganic, non-metallic materials prepared by controlled crystallization of glasses via different processing methods. They contain at least one type of functional crystalline phase and a residual glass. The volume fraction crystallized may vary from ppm to almost 100%”.
Glasses with compositions of 21Gd2O3-63MoO3-(16-x)B2O3-xTeO2 (mol%) (x= 0, 2, 4, 8) were prepared using a conventional melt quenching technique, and the crystallization behavior of ferroelastic β′-Gd2 MoO4)3 Crystals was examined to clarify the mechanism of self-powdering phenomenon and to design bulk crystallized glasses. It was found that the self-powdering phenomenon appeared significantly during the crystallization at temperatures near the crystallization peak temperature, but the phenomenon is suppressed in the crystallization at temperatures much higher than the glass transition temperature. It was also found that the substitution of TeO2 for B2O3 in the base glasses suppresses the self-powdering phenomenon and consequently bulk crystallized glasses were obtained in the glass with x=8 mol%. The densities at room temperature of the base glasses are d =4.755–4.906 g/cm3, being much higher than the value of d=4.555 g/cm3 for β′-Gd2(MoO4)3 crystal. It is proposed that the stresses in the inside of crystals induced by large density differences (i.e., large molar volume differences) between the glassy phase and crystals might be relaxed effectively in the glasses containing TeO2 with weak TeeO bonds and fragile character.
Glass powders are promising candidates for manufacturing a broad diversity of sintered materials like sintered glass-ceramics, glass matrix composites or glass bonded ceramics with properties and complex shape. Powder processing, however, can substantially affect sinterability, e.g. by promoting surface crystallization. On the other hand, densification can be hindered by gas bubble formation for slow crystallizing glass powders. Against this background, we studied sintering and foaming of silicate glass powders with different crystallization tendency for wet milling and dry milling in air, Ar, N2, and CO2 by means of heating microscopy, DTA, Vacuum Hot Extraction (VHE), SEM, IR spectroscopy, XPS, and ToF-SIMS. In any case, foaming activity increased significantly with progressive milling. For moderately milled glass powders, subsequent storage in air could also promote foaming. Contrarily, foaming could be substantially reduced by milling in water and 10 wt% HCl. Although all powder compacts were uniaxially pressed and sintered in air, foaming was significantly affected by different milling atmosphere and was found most pronounced for milling in CO2 atmosphere. Conformingly, VHE studies revealed that foaming is mainly driven by carbonaceous species, even for powders milled in other gases. Current results of this study thus indicate that foaming is caused by carbonaceous species trapped on the glass powder surface.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
In Germany spent nuclear fuel (SNF) and high level radioactive waste (HLW) are stored in interim storage containers with double lid systems. Those lids are equipped with metal seals (e.g. Helicoflex®) that ensure the safe enclosure of the inventory. Being licensed for up to 40 years of interim storage the evaluation of the long-term behavior of the seals is necessary, taking into account storage conditions, decay heat and possible mechanical loads.