5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (420)
Sprache
- Englisch (321)
- Deutsch (96)
- Mehrsprachig (3)
Referierte Publikation
- nein (420)
Schlagworte
- Additive Manufacturing (36)
- Additive manufacturing (23)
- Corrosion (20)
- Microstructure (17)
- Ontology (16)
- Glass (15)
- Ceramics (12)
- Fatigue (12)
- LCF (11)
- Additive Fertigung (10)
- Transmission electron microscopy (10)
- 316L (9)
- Crack growth (9)
- Creep (9)
- Fraktographie (9)
- Ontologie (9)
- Sintering (9)
- Ceramic (8)
- Thermoelectrics (8)
- Diffraction (7)
- Fractography (7)
- Machine Learning (7)
- Particle size (7)
- Powder (7)
- Ti-6Al-4V (7)
- CCUS (6)
- DCB (6)
- Digitalisierung (6)
- EBSD (6)
- High entropy alloys (6)
- Mikrostruktur (6)
- Scanning electron microscopy (6)
- Zugversuch (6)
- 3D printing (5)
- Aluminium (5)
- Anisotropy (5)
- Crystal plasticity (5)
- Glas (5)
- Glass fiber reinforced polymers (5)
- In situ (5)
- Low Cycle Fatigue (5)
- Microgravity (5)
- Oxidation (5)
- Slurry (5)
- VSSA (5)
- Water speciation (5)
- AGIL (4)
- Alloy 2618A (4)
- CALPHAD (4)
- CCS (4)
- CO2 (4)
- Coarsening (4)
- Creep behavior (4)
- Crystallization (4)
- Degradation (4)
- Droplet corrosion (4)
- EN AW-2618A (4)
- FAIR data management (4)
- Fatigue crack growth (4)
- Fe-Al alloys (4)
- High-temperature corrosion (4)
- In-space manufacturing (4)
- Intermetallics (4)
- Iron aluminides (4)
- Knowledge graph and ontologies (4)
- Kriechen (4)
- Laser powder bed fusion (4)
- Layerwise slurry deposition (4)
- Martensitic steel (4)
- Mechanical properties (4)
- Nano (4)
- Nano powder (4)
- Neutron diffraction (4)
- Nickel-base superalloys (4)
- Non-destructive testing (4)
- Normung (4)
- Plattform MaterialDigital (4)
- Polymer matrix composites (4)
- Residual Stress (4)
- Semantic Web Technologies (4)
- Sulfidation (4)
- Supercritical/dense phase CO2 (4)
- TMF (4)
- Thermomechanical fatigue (4)
- Vickers (4)
- Wissensrepräsentation (4)
- AISI 316L (3)
- Alkali ions (3)
- Alumina (3)
- Aluminium Alloy (3)
- Betriebsfestigkeit (3)
- CCU (3)
- Carbon steels (3)
- Ceramic spring (3)
- Dielectric strength (3)
- FAIR (3)
- Foaming (3)
- Fracture surface (3)
- Full Notch Creep Test (3)
- Gassensorik (3)
- Geothermal (3)
- H2Safety@BAM (3)
- High temperature corrosion (3)
- Keramik (3)
- Lebensdauer (3)
- Mechanical behavior (3)
- Mechanical testing (3)
- Mikroplastik (3)
- Ni-Resist (3)
- PMD Core Ontology (3)
- Residual stress (3)
- S-phase (3)
- SEM (3)
- Scarf repairs (3)
- Semantic Interoperability (3)
- Silicate Glasses (3)
- Soda-lime silicate glass (3)
- Superaustenite steel (3)
- Tensile Test (3)
- Texture (3)
- Transmission electron microscopy (TEM) (3)
- Wasser (3)
- Water content (3)
- Welding (3)
- Wind turbine blades (3)
- X-ray diffraction (3)
- Zerstörungsfreie Prüfung (3)
- μ-gravity (3)
- Advanced ceramics (2)
- Alkali zinc borate glasses (2)
- Alterung (2)
- Aluminium alloy (2)
- Analytische Zentrifuge (2)
- Bildanalyse (2)
- CLS (2)
- CO2 quality (2)
- CT (2)
- Calciumcobaltit (2)
- Calciummanganat (2)
- Carbon capture (2)
- Carbon capture storage (2)
- Carbon dioxide (2)
- Carbon steel (2)
- Characterization (2)
- Chemically complex alloy (2)
- Composite (2)
- Composites (2)
- Computed Tomography (2)
- Concrete (2)
- Copper (2)
- Crack tip opening displacement (2)
- Creep data (2)
- Dark-field transmission electron microscopy (2)
- Data Fusion (2)
- Data Interoperability (2)
- Data mapping (2)
- Datenbank (2)
- Dielectric breakdown (2)
- Diesel (2)
- Diffusion (2)
- Digital image correlation (2)
- Digitaler Zwilling (2)
- Digitalization (2)
- Digitization (2)
- Digtial Representation (2)
- Diopside (2)
- Dislocation (2)
- EDXRD (2)
- Electron microscopy (2)
- Electron-beam-induced modification (2)
- Environmental Stress Cracking (2)
- Environmental stress cracking (2)
- Faser-Kunststoff-Verbunde (2)
- Faserkunststoffverbunde (2)
- Faseroptische Sensorik (2)
- Ferritic-martensitic steels (2)
- Fracture Toughness (2)
- Full-Notch Creep Test (FNCT) (2)
- Geführte Ultraschallwellen (2)
- Gitterkonstanten (2)
- Glass-ceramics (2)
- Hard machining (2)
- Heat treatment (2)
- High Cycle Fatigue (2)
- High Entropy Alloy (2)
- High Temperature Corrosion (2)
- High temperature (2)
- High temperature mechanical properties (2)
- High-entropy alloy (2)
- High-entropy alloys (2)
- Hochentropie-Legierung (2)
- Hochtemperatur (2)
- Impurities (2)
- In-situ (2)
- Joined nickel-based alloys (2)
- Knowledge Representation (2)
- L-PBF (2)
- Laser (2)
- Laser beam melting (2)
- Layerwise (2)
- Leckdetektion (2)
- Lunar regolith simulant (2)
- ML (2)
- Material Digital (2)
- Material digital (2)
- Metrologie zur Wasserstoffspeicherung (2)
- Microplastics (2)
- Microstrucrue Design (2)
- Microstructural analysis (2)
- Microstructure Design (2)
- Mixed gas atmosphere (2)
- Modeling (2)
- Multilayer (2)
- Multilayer technology (2)
- Multilayertechnik (2)
- NDT (2)
- Nano particle (2)
- Nano screening (2)
- Nano-powder (2)
- Nanomaterial (2)
- Nanoparticles (2)
- Nanopulver (2)
- Notches (2)
- OECD TG 124 (2)
- Ontologien (2)
- Ontology development (2)
- Orientation (2)
- Oxidation behavior (2)
- Oxide Glasses (2)
- Oxidglas (2)
- PE-HD (2)
- PMD (2)
- PMDco (2)
- Partikelgrößenverteilung (2)
- Phase-field simulation (2)
- Phasenidentifikation (2)
- Pipeline (2)
- Polyethylen (2)
- Polyethylen hoher Dichte (2)
- Polymer Matrix Composites (2)
- Process monitoring (2)
- Push-out Test (2)
- REM (2)
- Reaction sintering (2)
- Residual Stresses (2)
- Ressidual stress (2)
- Rotor blade (2)
- Sandwich (2)
- Scale-bridging (2)
- Schadensanalyse (2)
- Schädigung (2)
- Selective Laser Melting (2)
- Semantic Representation (2)
- Semantic Web (2)
- Semantisches Web (2)
- SensRef (2)
- Silicon Carbide (2)
- Silver diffusion (2)
- Silver-glass-metallization-paste (2)
- Sinter additive (2)
- Sintering additives (2)
- Sintern (2)
- Spannungsriss (2)
- Spectroscopy (2)
- Spray drying (2)
- Spring constant (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Structural Health Monitoring (SHM) (2)
- Superlegierung (2)
- TED-GC-MS (2)
- TEM (2)
- Tensile data (2)
- Tensile test (2)
- Thermo-Mechanical Fatigue (2)
- Thermoelectric (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Topographie (2)
- Topography (2)
- UV-irradiation (2)
- Ultrasound (2)
- Virtual experiments (2)
- Viscoplasticity (2)
- Viscosity (2)
- Wall thickness (2)
- Wind turbine blade shells (2)
- Windenergie (2)
- XANES (2)
- XRD (2)
- Zero-g (2)
- Zugeigenschaften (2)
- robotische Glasschmelzanlage (2)
- µ-gravity (2)
- 3D (1)
- 3D Druck (1)
- 3D REM (1)
- 3D Reconstruction (1)
- 3D glass structure model (1)
- 3D materialography (1)
- 3D-printing (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9–12%Cr steel (1)
- AFM based test methods (1)
- AM (1)
- Accelerated integration scheme (1)
- Acids (1)
- Active thermography (1)
- Additiv gefertigter Stahl (1)
- Adiabatic shear bands (1)
- Advanced manufacturing (1)
- Aerospace (1)
- Age hardening (1)
- Ageing (1)
- Agglomerates (1)
- Aggressive gases (1)
- Aging (1)
- Air-coupled ultrasonic testing (1)
- Airborne ultrasonic testing (1)
- Al-Li alloys (1)
- Alkali zinc borate glass (1)
- Aluminum (1)
- Aluminum alloys (1)
- Analyse (1)
- Analysis (1)
- Analytik (1)
- Annealing (1)
- Atmospheric plasma spraying (1)
- Aussonderugnsrate (1)
- Austenitic cast iron (1)
- Austenitic steel 316L (1)
- Automation (1)
- BET (1)
- Biaxial strength (1)
- Binder jetting (1)
- Bioactive Glass (1)
- Bioceramics (1)
- Biodiesel (1)
- Blähen (1)
- Bond energy (1)
- Breakdown strength (1)
- Brinell hardness (1)
- Bruchflächen (1)
- Bruchflächenanalyse (1)
- Bruchflächenauswertung (1)
- Bundesoberbehörden (1)
- CFK (1)
- CO2-corrosion (1)
- Calcination (1)
- Calcium cobaltite (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calibration (1)
- Cantor alloy (1)
- Capture (1)
- Carbon (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibers (1)
- Casting (1)
- Centrifugal casting (1)
- Ceramic multilayer (1)
- Ceramic springs (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Cetrifugal Liquid Sedimentation CLS (1)
- Chemically complex alloys (1)
- Chemo-mechanical coupling (1)
- Chromatography (1)
- Chromia (1)
- Chromium oxide (1)
- Co-firing (1)
- Co-segregation (1)
- Coatings (1)
- Complex borides (1)
- Complex loading (1)
- Component assessment (1)
- Composite testing (1)
- Compositionally complex alloys (1)
- Computed tomography (1)
- Condensation (1)
- Contamination (1)
- Continnum damage model (1)
- Cooling simulations (1)
- Cow stress (1)
- Cr2O3 (1)
- Crack (1)
- Crack Propagation (1)
- Crack evolution (1)
- Crack propagation (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep-Fatigue (1)
- Creep-fatigue (1)
- Crevice corrosion (1)
- Cross linking (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Cubical Iron Oxide (1)
- Cure process (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic oxidation (1)
- Cyclic softening (1)
- DIN (1)
- DLS (1)
- Damage (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage mechanisms (1)
- Dark-field transmission electron microscopy (DFTEM) (1)
- Data Exchange (1)
- Data Management (1)
- Data Structures (1)
- Data linking (1)
- Data management (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Datenökosystem (1)
- Deep learning (1)
- Defects (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation behavior (1)
- Dehnungsfehler (1)
- Density (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Density-based phase-field modelling (1)
- Dental (1)
- Destabilization (1)
- Die casting (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Diffraction Elastic Constants (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Diffusion coefficient (1)
- Dislocation substructure (1)
- Dislocations (1)
- Disordered assemblies (1)
- Dispersion process (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distribution function (1)
- Driving physical mechanism (1)
- Dual-energy (1)
- Durchschlagfestigkeit (1)
- Dynamic mechanical analysis (1)
- Dynamic mechanical analysis (DMA) (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EDX (1)
- Early oxidation (1)
- Eigenspannung (1)
- Elastic constants (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electron Microscopy (1)
- Electron backscatter diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electronic Lab Notebook (1)
- Elektronisches Laborbuch (ELN) (1)
- Energy harvesting (1)
- Entwicklung (1)
- Environmental Stress Cracking (ESC) (1)
- Ermüdung (1)
- Ermüdungsriss (1)
- Erneuerbare Energien (1)
- Etching (1)
- Extensometer (1)
- FAIR Data Management (1)
- FAIR data (1)
- FCH JU (1)
- FIB (1)
- Fabrication method (1)
- Fahrrad (1)
- Failure test (1)
- Faser (1)
- Faseroptik (1)
- Faserverstärkte Kunstoffe (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue damage (1)
- Fatigue fracture (1)
- Fatigue of sandwich shell structures (1)
- Fatigue of sandwich structures (1)
- Fatigue performance (1)
- FeCr- alloys (1)
- Federkonstante (1)
- Feldspar (1)
- Fem (1)
- Ferritic Alloys (1)
- Ferroelectret (1)
- Ferroelektret (1)
- Fertigungstechnologie (1)
- Festigkeit (1)
- Fiber (1)
- Fiber reinforced polymer (1)
- Fiber reinforced polymers (1)
- Fine Powder (1)
- Finite element analysis (1)
- Finite elmenet simulation (1)
- Flowability (1)
- Fluorescence spectroscopy (1)
- Focused Ion Beam (1)
- Foliengießen (1)
- Force-distance diagram (1)
- Formerkennung (1)
- Fracture Mechanics (1)
- Fracture Surface Analysis (1)
- Fracture behavior (1)
- Fracture surface analysis (1)
- Fracture toughness (1)
- Freeze Drying (1)
- GC-MS (1)
- GD-OES (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasgehalt (1)
- Gasturbinen (1)
- Gefüge (1)
- General Aviation (1)
- Geopolymers (1)
- Gitterfehlpassung (1)
- GlasDigital (1)
- Glasmatrixkomposit (1)
- Glass Fibres (1)
- Glass composition (1)
- Glass fibre reinforced plastics (1)
- Glass melting (1)
- Glass powder (1)
- Glass screening device (1)
- Gold nanoparticle synthesis (1)
- Gold nanoparticles (1)
- Gradient-enhanced damage (1)
- Grain boundaries (1)
- Grain boundary engineering (1)
- Granules (1)
- Granulometrie (1)
- Graphic design (1)
- Grünfolieneigenschaften (1)
- HDPE Soprption (1)
- HEA (1)
- HIP (1)
- Hardness (1)
- Hartbearbeitung (1)
- Heat Treatments (1)
- Heißgasextraktion (1)
- Heißgaskorrosion (1)
- High Entropy Alloys (1)
- High Temperature Testing (1)
- High entropy alloy (1)
- High entropy superalloys (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (1)
- Hochentropielegierungen (1)
- Hochspannungsprüfung (1)
- Hochtemperaturbrennstoffzelle (1)
- Hochtemperaturermüdung (1)
- Horizon 2020 (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot pressing (1)
- Hydrogen (1)
- Hydrogen permeation (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hyper-arid (1)
- IN 718 (1)
- IN738LC (1)
- IR (1)
- ISRU (1)
- Implant failures (1)
- Implants (1)
- In situ tensile test (1)
- In-Situ Testing (1)
- Inconel 686 coating (1)
- Inconel 718 (1)
- Infrastructure (1)
- Initial attachment (1)
- Injection (1)
- Interface (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Internal friction (1)
- Interoperability (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Iron oxide nanoparticles (1)
- Kalzinierung (1)
- Kavitation (1)
- Kennwertermittlung (1)
- Keramikfeder (1)
- Keramische Folien (1)
- Klebung (1)
- Kleinprobenprüfung (1)
- Knowledge Graphs (1)
- Knowledge graph (1)
- Kontrastierung (1)
- Korrosion (1)
- Kriechversuche (1)
- Kristallisation (1)
- Kunststoffe (1)
- Kupfer (1)
- Kurzzeitfestigkeit (1)
- L-PBF 316L (1)
- LSD-print (1)
- LTCC (1)
- Laminography (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed fusion (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser cladding (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laserbearbeitung (1)
- Laserscanningmikroskopie (LSM) (1)
- Lattice misfit (1)
- Layer depostion (1)
- Layer system (1)
- Layerwise Slurry Deposition (1)
- Legierung mit komplexer Zusammensetzung (1)
- Li-ion battery (1)
- Life cycle (1)
- Lightweight materials (1)
- Lightweighting (1)
- Lithium Ion Batteries (1)
- Localized plasmons (1)
- Long-term storage (1)
- Low cycle fatigue (1)
- Low-Cycle-Fatigue (1)
- Low-cycle-fatigue behaviour (1)
- Luftultraschall (1)
- Lunar habitat (1)
- Lösungsmittel (1)
- MEA (1)
- Manganese oxide (1)
- Manufacturing (1)
- Martensitic steel (1)
- Mat-o-lab (1)
- Material defects (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialmodell (1)
- Materials Modelling (1)
- Materials Science (1)
- Materials science (1)
- Materials testing (1)
- Materialwissenschaft (1)
- Matrix (1)
- Mechanical and thermal testing (1)
- Mechanische Eigenschaften (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Medium Entropy Alloys (1)
- Medium entopy alloy (1)
- Medium-entropy alloy (1)
- Melt pool boundary (1)
- Metadata schema (1)
- Metallic components (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metrologie (1)
- Micro-shrinkages (1)
- Microbiologically influenced corrosion (1)
- Microhardness (1)
- Micromechanical model (1)
- Microstructural characterization (1)
- Microstructural evolution (1)
- Microstructural orientation (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Microstructure-property-correlation (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrogravitation (1)
- Mikrostrukturentwicklung (1)
- Mindedestberstdruck (1)
- Mixed Ca-K-Na phosphates (1)
- Mn3O4 (1)
- Modell (1)
- Monte-Carlo Simulation (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial stress state (1)
- NTE (1)
- Na and K rhenanites (1)
- Nano material (1)
- Nano-assemblies (1)
- Nanoparticle synthesis (1)
- Nanopartikel (1)
- Nanoplattform (1)
- Negative charged microparticle (1)
- Neutron Diffraction (1)
- New standards (1)
- Nickel-base superalloy (1)
- Non-desired foaming (1)
- Nondestructive testing (1)
- Nucleation (1)
- Nucleation mode (1)
- OECD TG (1)
- Oberflächenaktive wässrige Medien (1)
- Online quality control (1)
- Ooxidation (1)
- Optic (1)
- Oriented surface crystallization (1)
- Oxide glass (1)
- P92 (1)
- P92 steels (1)
- PA6.6 (1)
- PBF-LB/M/316L (1)
- PPA (1)
- Parametric modeling (1)
- Particle size determination (1)
- Partikelgröße (1)
- Patent (1)
- Paving (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase diagram (1)
- Phase field simulation (1)
- Phase separation (1)
- Phase transformation (1)
- Phase transformations (1)
- Phase-Field Simulation (1)
- Phase-Field Simulations (1)
- Phase-field Simulation (1)
- Photon counting detector (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Pipeline network (1)
- Planetary surface (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Plattform Material Digital (1)
- Plattform Material Digital (PMD) (1)
- Pole figures (1)
- Polyaniline (1)
- Polyethylene, PE-HD (1)
- Polymer (1)
- Polymer Matrix Composite (1)
- Polymerwissenschaften (1)
- Porcelain (1)
- Pores (1)
- Powder deposition (1)
- Power plant (1)
- Precipitates (1)
- Precipitation (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Pressure assisted sintering (1)
- Pressure-assisted sintering (1)
- Probengrößeneffekt (1)
- Protective coating (1)
- Präparation (1)
- Pull-out (1)
- Pycnometry (1)
- Quantitative Precipitation Analysis (1)
- Rafting (1)
- Recommendations (1)
- Recycling (1)
- Reference data (1)
- Reference material (1)
- Referenzdaten (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Regelwerke (1)
- Relaxation (1)
- Relaxation metallic glasses (1)
- Relaxationsphänomene (1)
- Repair of sandwich shell structures (1)
- Reproducibility (1)
- Residual stress analysis (1)
- Residual stresses (1)
- Resistance (1)
- Restberstfestigkeit (1)
- Review (1)
- Rissentwicklung (1)
- Rissheilung (1)
- Risswachstum (1)
- Roboter (1)
- Rotorblattschalen (1)
- Roughness (1)
- Röntgen-Refraktion (1)
- Röntgenbeugung (1)
- Röntgenrefraktion (1)
- S355 steel sheet (1)
- SHM (1)
- SIMS (1)
- SLM (1)
- Safety assessment (1)
- Sailplane Development Panel (1)
- Salzschmelzen (1)
- Sample preparation (1)
- Sandwich structures (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning electron microscope (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint repair (1)
- Schadensprävention (1)
- Schwerelosigkeit (1)
- Schwingbrüche (1)
- Schwingstreifen (1)
- Screen printing (1)
- Selective laser melting (1)
- Semantic Interioerability (1)
- Semantic web (1)
- Semiconductor materials (1)
- Sensor (1)
- SiO2 (1)
- Sibayak (1)
- Silber (1)
- Silicatglas (1)
- Silver cluster (1)
- Silver metallization paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Simulation (1)
- Simulation of concrete (1)
- Single-Crystal (1)
- Single-crystals (1)
- Sintering atmosphere (1)
- Sintertemperatur (1)
- Sinterung (1)
- Size distribution (1)
- Slow Crack Growth (SCG) (1)
- Slow crack growth (1)
- Small-Angle X-ray Scattering (1)
- Soda-lime-silica glass (1)
- Sol-gel coating (1)
- Solar sintering (1)
- Solid solution strengthening (1)
- Space exploration (1)
- Spannungs-Dehnungs-Verhalten (1)
- Spark plasma sintering (1)
- Specific surface (1)
- Spezifische Oberfläche (1)
- Spinodal Decomposition (1)
- Split Hopkinson bar (1)
- Spring constant (1)
- Stainless steel (1)
- Stanzen (1)
- Steel (1)
- Storage (1)
- Strain rate dependence (1)
- Structure (1)
- Structured heating (1)
- Struktur (1)
- Subsurface defects (1)
- Sulfiding (1)
- Superalloy (1)
- Superalloy single crystals (1)
- Superalloys (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superlegierungen (1)
- Surface (1)
- Surface Energy (1)
- Surface Nucleation (1)
- Surface crystallization (1)
- Surface energy (1)
- Symbolik (1)
- Symmetric dwell periods (1)
- Synchrotron CT (1)
- Synchrotron radiation (1)
- Synchrotronstrahlung (1)
- Syngle Crystal alloy (1)
- Synthetic air (1)
- Systematische Schadensanalysen, Prozeduren (1)
- TAHYA (1)
- TED (1)
- TMF experiments (1)
- Temperature (1)
- Temperature driven process (1)
- Temperaturschwankungen (1)
- Tempered Martensite Ferritic Steels (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile Properties (1)
- Tensile Test Ontology (1)
- Tensile stress relaxation (1)
- Tensile testing (1)
- Texturation (1)
- Thermal degradation (1)
- Thermal stress (1)
- Thermische Analyse (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical-loading (1)
- Thermo-optical measurement (1)
- Thermoanalytical Methods (1)
- Thermoelectric generator (1)
- Thermoelectric oxide (1)
- Thermoelektrika (1)
- Thermoelektrischer Generator (1)
- Thermographie (1)
- Thermogravimetric analysis (1)
- Thermogravimetry (1)
- Thermomechanics (1)
- Thermomechanik (1)
- Thermomechanische Eigenschaften (1)
- Thermoset polymers (1)
- Thesaurus (1)
- Titanium (1)
- Tomography (1)
- Tools (1)
- Transmissionselektronenmikroskopie (1)
- Transparent ceramics (1)
- Two Photon Polymerization (1)
- Ultraschall (1)
- Umgebungsbedingter Spannungsriss (1)
- Under cyclic loading (1)
- Utilization (1)
- Utilization, and storage (CCUS) technology (1)
- VCSEL (1)
- Vacuum hot extraction (1)
- Vernetzung (1)
- Versetzungsstrukturen (1)
- Vickers hardness (1)
- Virtueller Materialdatenraum (1)
- Viskoplastisch (1)
- Wandler (1)
- Waste water (1)
- Water-based (1)
- Weibull Distribution (1)
- Weibull distribution (1)
- Welding processing influences (1)
- Werkstoffdaten (1)
- Werkstoffprüfung (1)
- Whole-chain CCS scenario (1)
- Wind energy (1)
- Wind turbine (1)
- Wind turbine blade shell structures (1)
- Withstand voltage tests (1)
- Workshop (1)
- Wärmespeicher (1)
- X-Ray Diffraction (1)
- X-ray imaging (1)
- X-ray laminography (1)
- X-ray refraction (1)
- XRM (1)
- Zugversuchsontologie (1)
- Zyklische Belastung (1)
- Zyklische R-Kurve (1)
- alumina (1)
- arbon capture (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- condensate (1)
- corrosion (1)
- dental (1)
- dispersion (1)
- electrochemical characterization (1)
- impurities (1)
- microstructure analysis (1)
- multi scale testing (1)
- particle size determination (1)
- pitting corrosion (1)
- sample preparation (1)
- selective laser melting (1)
- thermomechanische Beanspruchung (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- zertifizierte Referenzmaterialien (1)
- Öffentliche Sicherheit (1)
- Überblick (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (420)
- 5.1 Mikrostruktur Design und Degradation (110)
- 5.2 Metallische Hochtemperaturwerkstoffe (108)
- 5.4 Multimateriale Fertigungsprozesse (101)
- 5.3 Polymere Verbundwerkstoffe (52)
- 5.6 Glas (47)
- 5.5 Materialmodellierung (45)
- 8 Zerstörungsfreie Prüfung (41)
- 9 Komponentensicherheit (39)
- 7 Bauwerkssicherheit (33)
Eingeladener Vortrag
- nein (420) (entfernen)
Artificial bone replacement by individual customized three-dimensional resorbable bioactive glass has not yet been widely established in the clinical use. This is mainly due to the antagonism of sintering ability and suitable bioactivity. Competitive crystallization often prevents the generation of dense sintered bodies, especially for additive manufactured 3D structures. Previous studies of the fluoride-containing glass F3 have shown its potential to combine both sintering ability and suitable bioactivity. Furthermore, the occurring sintering blockade by surface crystallization of Na2CaSi2O6 was tunable by glass particle size.
In this study the glasses F3, F3-Cu with 1 mol% CuO added at the expense of CaO and the well-known 13-93 were chosen to determine the influence of surface crystallization on 3D printed sinter bodies. For this purpose, grain size fractions in range of smaller 32 µm to 315 µm in fraction size of 6-20 µm were sieved from jaw crushed glass frit as well as glass cubes were cut from casted blocks for all glasses. Sintering behavior of both pressed and printed powder compacts was observed via heating microscopy. Crystallization was determined by DTA and crystallization progress was monitored on fractured sinter bodies and polished cubes via electron and laser scanning microscopy as well as with diffractometry.
Depending on grain size the formation of crystalline support framework along former grain boundaries shows the capability to stabilize fully densified sinter bodies before softening. Beside of this, the generation of complex hierarchic porosity was possible as well.
Dislocations are the carriers of plastic deformation. As such, their characterization offers important information on the properties they affect. In this contribution, a new tool is presented, which is incorporated in Amira ZIB Edition and allows for three-dimensional (3D) imaging and quantification of dislocations substructures from thick regions an electron-transparent specimen. In the tool, the dislocation segments are traced on diffraction contrast images that are obtained in the transmission electron microscope (TEM). The uncertainties related to the experimental setup and to the proposed method are discussed on the base of a tilt series.
The presentation gives an overview of two slurry-based additive manufacturing (AM) technologies specifically developed for advanced ceramic materials.
The “Layerwise Slurry Deposition” (LSD-print) is a modification of Binder Jetting making use of a ceramic slurry instead of a dry powder as a feedstock. In this process, a slurry is deposited layer-by-layer by means of a doctor blade and dried to achieve a highly packed powder layer, which is then printed by jetting a binder. The LSD-print technology combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing.
The Laser Induced Slip casting (LIS) technology follows a novel working principle by locally drying and selectively consolidating layer-by-layer a ceramic green body in a vat of slurry, using a laser as energy source. LIS combines elements of Vat Photopolymerization with the use of water-based feedstocks containing a minimal amount of organic additives. The resulting technology can be directly integrated into a traditional ceramic process chain by manufacturing green bodies that are sintered without the need of a dedicated debinding.
Both technologies offer high flexibility in the ceramic feedstock used, especially concerning material and particle size. Advantages and disadvantages are briefly described to outline the specific features of LSD-print and LIS depending on the targeted application.
Lifetime aspects including fatigue failure of concrete structures were traditionally only of minor importance. Because of the growing interest in maxing out the capacities of concrete, its fatigue failure under compression has become an issue. A variety of interacting phenomena such as e.g. loss of prestress, degradation due to chemical reactions or creep and shrinkage influence the fatigue resistance. Failure due to cyclic loads is generally not instantaneous, but characterized by a steady damage accumulation. Therefore, a reliable numerical model to predict the performance of concrete over its lifetime is required, which accurately captures order effects and full three-dimensional stress states.
Many constitutive models for concrete are currently available, which are applicable for specific loading regimes, different time scales and different resolution scales.
However, a key limitation of those models is that they generally do not address issues related to fatigue on a structural level. Very few models can be found in the literature that reproduce deterioration of concrete under repeated loading-unloading cycles. This is due to the computational effort necessary to explicitly resolve every cycle which exceeds the currently available computational resources. The limitation can only be overcome by the application of multiscale methods in time.
The objective of the paper is the development of numerical methods for the simulation of concrete under fatigue loading using temporal multiscale methods.
First, a continuum damage model for concrete is developed with a focus on fatigue under compressive stresses. This includes the possibility to model stress redistributions and capture size effects. In contrast to cycle based approaches, where damage is accumulated based on the number of full stress cycles, a strain based approach is developed that can capture cyclic degradation under variable loading cycles including different amplitudes and loading frequencies. The model is designed to represent failure under static loading as a particular case of fatigue failure after a single loading cycle. As a consequence, most of the material parameters can be deduced from static tests. Only a limit set of additional constitutive parameters is required to accurately describe the evolution under fatigue loading. Another advantage of the proposed model is the possibility to directly incorporate other multi-physics effects such as creep and shrinkage or thermal loading on the constitutive level.
Second, a multiscale approach in time is presented to enable structural computations of fatigue failure with a reduced computational effort. The damage rate within the short time scale corresponding to a single cycle is computed based on a Fourier based approach. This evolution equation is then solved on the long time scale using different implicit and explicit time integration schemes. Their performance and some limitations for specific loading regimes is discussed.
Finally, the developed methods will be validated and compared to experimental data.
A continuum damage model for concrete is developed with a focus on fatigue under compressive stresses. This includes the possibility to model stress redistributions and capture size effects. In contrast to cycle based approaches, where damage is accumulated based on the number of full stress cycles, a strain based approach is developed that can capture cyclic degradation under variable loading cycles including different amplitudes and loading frequencies. The model is designed to represent failure under static loading as a particular case of fatigue failure after a single loading cycle. As a consequence, most of the material parameters can be deduced from statictests. Only a limit set of additional constitutive parameters is required to accurately describe the evolution under fatigue loading. Another advantage of the proposed model is the possibility to directly incorporate other multi-physics effects such as creep and shrinkage or thermal loading on the constitutive level. A multiscale approach in time is presented to enable structural computations of fatigue failure with a reduced computational effort. The damage rate within the short time scale corresponding to a single cycle is computed based on a Fourier based approach. This evolution equation is then solved on the long time scale using different implicit and explicit time integration schemes. Their performance and some limitations for specific loading regimes is discussed.
Due to combined cyclic mechanical and thermal loading during operation, the material of exhaust gas conducting components of combustion engines is exposed to thermomechanical fatigue (TMF). This leads to formation and growth of cracks, especially at the most highly stressed points of these components. In order to better predict the service life of cracked components before failure, it is necessary to identify a crack propagation law for the material used. Isothermal crack propagation tests have been carried out at several temperatures with a typical cast iron to identify such a law. The crack length is measured by the potential drop method. The compliance method, fractography and thermographic camera measurements have been used to validate and calibrate the potential drop measurements. Each of the isothermal tests has been simulated using a specially developed FEM-algorithm based on remeshing and remapping. This algorithm has been implemented in python and ABAQUS. Thereby, the crack tip region is modeled by collapsed Quad8 elements. From the individual simulations, the cyclic crack tip opening displacement (ΔCTOD) is extracted and regarded as a potential fracture mechanics parameter which controls the crack growth rate. By combining the data from the experiments and the simulations, the crack propagation law has been identified. Finally, anisothermal crack propagation tests have been performed for validation of the crack growth law.
The multi-phase approach has proven to widen the application properties of high entropy alloys. After a decade of testing different alloys in the Al-Co-Cr-Cu-Fe-Ni-Ti family the Al10Co25Cr8Fe15Ni36Ti6 was found to be a solid base for more fine-tuned microstructural optimization. Following the example of superalloys, the Al10Co25Cr8Fe15Ni36Ti6 alloy aims for a γ/γ' microstructures in order to guarantee a good microstructural stability at high temperatures. The shape and volume fraction of the γ' particles is known to influence the mechanical properties of superalloys, and they do so in the high entropy family as well [1]. Shape, misfit and creep properties of several modified versions of the Al10Co25Cr8Fe15Ni36Ti6 alloy are compared and discussed in this talk.
The search for strong and tough oxide glasses is important for making safer, more environmentally friendly, thinner glass products. However, this task remains generally difficult due to the material’s inherent brittleness. In search for tougher glasses, fracture toughness (KIC) prediction models are helpful tools to screen for promising candidates.
In this work, a novel model to predict KIC via the fracture surface energy, γ, is presented. Our approach uses readily available crystallographic structure data of the glass’s isochemical crystal and tabled diatomic chemical bond energies, D0. The method assumes that γ of a glass equals the fracture surface energy of the most likely cleavage plane of the crystal. Calculated values were not only in excellent agreement with those calculated with a former well-working model, but also demonstrates a remarkable equivalence between crystal cleavage planes and glass fracture surfaces.
Finally, the effectiveness of fracture toughness enhancement by chemical substitution is discussed based on our results and alternative toughening strategies will be suggested.
The methods of computational damage mechanics are well-established for the description of degradation of materials under monotone loading. An extension to structural damage induced by cyclic loading is however significantly limited. This is due to enormous computational costs required to resolve each load cycle by conventional temporal incremental integration schemes while a typical fatigue loading history comprises between thousands and millions of cycles. Despite the permanent increase of computational resources and algorithmic performance, a successful approach is rather based on the development of novel multiscale in time integration schemes.
A Fourier transformation-based temporal integration (FTTI) is represented, which takes advantage of temporal scale separation incorporated into the cycle jump method. The response fields are approximated by a Fourier series whose coefficients undergo the evolution on a long-time scale. This is correlated with the evolution of the history variables, including damage, by means of the adaptive cycle jump method of various orders. The necessary extrapolation rates are obtained from the underlying solution of a short-time scale problem, which results from the oscillatory boundary condition and fulfills the global equilibrium of the Fourier coefficients. In this way, a remarkable speedup is achieved because the number of cycles to be fully integrated dramatically decreases.
The key idea behind the FTTI method is that the global in space equilibrium problem is linear since it is decoupled from the evolution equations. The latter are solved in the quadrature points under response fields prescribed throughout the whole load cycle. Consequently, integration of a single load cycle is much more efficient than the conventional single scale integration where the global equilibrium iteration and the local iteration of the evolution equations are coupled. This results in an additional speedup of the FTTI method.
The performance of the FTTI technique is demonstrated for two different constitutive behaviors: a viscoplastic model with a damage variable governed by the local equivalent viscoplastic strain; a quasi-brittle response where the damage variable is driven by a non-local equivalent strain. The latter is implicitly introduced as proposed by Peerlings. Both, the explicit and implicit extrapolation schemes are validated. The FTTI solutions agree very well with the reference cycle-by -cycle solutions, while significantly reducing the computational costs. The adaptive determination of the jump length can properly recognize the particular responses throughout the fatigue loading history (stationary fatigue, acceleration of fatigue damage when approaching failure) as well as stress redistribution phenomena.
A constitutive model for the mechanical behaviour of single crystal Ni-base superalloys under high temperature conditions has been developed in the framework of a Cooretec project in cooperation with Siemens AG, MTU Aero Engines AG and University Bayreuth. In addition to the conventional material properties e.g. elastic constants, the model requires the parameters of the initial microstructure as an input. Thus, the γ’-precipitate size and the channel width of the γ-matrix were obtained from SEM micrographs. The model uses the slip system theory and describes the movement, multiplication and annihilation of dislocations in the channels. Furthermore, the cutting of precipitates is another mechanism contributing to the plastic flow. The evolution of the morphology due to rafting and its effects on the deformation have been implemented according to. The kinematic hardening is introduced as a stress tensor to realistically represent the strain hardening of arbitrary oriented single crystals.
The mechanical behaviour of single crystal specimens has been experimentally investigated in tension tests at different strain rates and in creep tests under various loads. The constitutive model has been calibrated based on the experimental data for temperatures of 950°C and 850°C and the [001] and [111] crystallographic orientations.
Finally, a micromechanical model was created to simulate the creep response of additive manufactured polycrystalline structures. An EBSD image is taken to obtain the grain geometry and their respective orientation. The grain boundaries are discretised using cohesive elements, whereas the single crystal model was applied to each grain in the representative volume. The polycrystal model is generated using Dream3D, NetGen and other software previously developed at the BAM.
Präsentation der Aktivitäten an der BAM im Bereich Additive Fertigung unter Mikrogravitationsbedingungen für Anwendungen im Weltraum beim Arbeitsgruppentreffen der AG Werkstoffe & Prozesse vom Netzwerk Space2Motion.
Additive Manufacturing for dental restorations by layerwise slurry deposition (LSD-print) technology
(2023)
The growing market of custom-made dental restorations offers a major potential for an application of ceramic additive manufacturing (AM).
The possibility to individualize patient specific design and to establish new efficient workflows, from model generation to manufacturing, can be fully exploited by AM technologies. However, for mass customization to be truly envisioned, ceramic AM needs to achieve a level of maturity, aesthetic quality, and productivity comparable to established manufacturing processes.
In this presentation, the potential of the “layerwise slurry deposition” LSD-print technology for dental applications will be explored. It has been shown in the past years that the LSD-print can be applied to advanced ceramic materials such as alumina and silicon-infiltrated silicon carbide. For these materials, the LSD-print technology combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics.
The current development deals with the challenges of applying this technology to a feldspar dental material, comparing the quality of AM restorations with the equivalent material for an established CAD/CAM workflow.
Preliminary results not only indicate that the AM material produced by LSD-print can be competitive in terms of mechanical properties, but also that aesthetically satisfactory restorations can be manufactured for veneers, inlays and onlays as well as single unit fixed dental prostheses (FDPs).
The presentation focuses on the material and technological challenges alongside the process chain, from the printing process, to debinding, firing and finishing the restorations.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. Powder bed fusion and binder jetting especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability.
The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method which enables the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder layer. This offers high flexibility in the ceramic feedstock used, especially concerning material and particle size.
The LSD technology can be combined with binder jetting to develop the so-called “LSDprint” process for the additive manufacturing of ceramics.
The LSDprint technology combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing.
In this presentation, the LSD process will be introduced and several examples of application ranging from silicate to high-performance ceramics will be shown.
Recent developments towards the scale-up and industrialization of this process will be discussed, alongside future perspectives for the multi-material additive manufacturing.
Powder bed -based technologies are amongst the most successful Additive Manufacturing (AM) techniques. "Selective laser sintering/melting" (SLS/SLM) and "binder jetting 3D printing" (3DP) especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability. In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method which enables the use of SLS/SLM and 3DP technologies for advanced ceramic materials. LSD consists in the layer-by-layer deposition of a ceramic slurry by means of a doctor blade. Each layer is deposited and dried to achieve a highly packed powder layer, which can be used for SLM or for 3DP. This technique offers high flexibility in the ceramic feedstock used, especially concerning material and particle size, and is capable of producing parts with physical and mechanical properties comparable to traditionally shaped parts. In this presentation, the LSD technique will be introduced and several examples of application to porcelain, SiC and alumina products will be reported.
The possibility to produce dense monolithic ceramic parts with additive manufacturing is at the moment restricted to small parts with low wall thickness. Up to now, the additive manufacturing of voluminous ceramic parts is realized by powder bed based processes which, however, generate parts with residual porosity. Via infiltration these parts can be processed to dense parts like for example SiC but this is not possible for all ceramics like for example Si3N4. There is a lack of methods for the additive manufacturing of dense voluminous parts for most ceramics.
We have developed a new additive manufacturing technology, the Laser Induced Slip casting (LIS), based on the layerwise deposition of slurries and their local drying by laser radiation. Laser Induced Slip casting generates ceramic green bodies which can be sintered to dense ceramic components like traditional formed ceramic powder compacts. We will introduce the LIS technology, green bodies and sintered parts will be shown and their microstructure and mechanical properties will be discussed.
Most additive manufacturing processes which produce dense ceramics are nowadays limited in size because of inevitable post-processing steps like for example binder removal in stereolithography. The additive manufacturing of voluminous ceramic parts is realized by powder bed based processes which, however, generate parts with residual porosity. Via infiltration these parts can be processed to dense parts like for example SiC but this is not possible for all ceramics like for example Si3N4. There is a lack of methods for the additive manufacturing of dense voluminous parts for most ceramics.
We have developed a new additive manufacturing technology, the Laser Induced Slip casting (LIS), based on the layerwise deposition of slurries and their local drying by laser radiation. Laser Induced Slip casting generates ceramic green bodies which can be sintered to dense ceramic components like traditional formed ceramic powder compacts. We will introduce the LIS technology, green bodies and sintered parts will be shown and their microstructure and mechanical properties will be discussed.
Most additive manufacturing processes which produce dense ceramics are nowadays limited in size because of inevitable post-processing steps like for example binder removal in stereolithography. The additive manufacturing of voluminous ceramic parts is realized by powder bed based processes which, however, generate parts with residual porosity. Via infiltration these parts can be processed to dense parts like for example SiC but this is not possible for all ceramics like for example Si3N4. There is a lack of methods for the additive manufacturing of dense voluminous parts for most ceramics.
We have developed a new additive manufacturing technology, the Laser Induced Slip casting (LIS), based on the layerwise deposition of slurries and their local drying by laser radiation. Laser Induced Slip casting generates ceramic green bodies which can be sintered to dense ceramic components like traditional formed ceramic powder compacts. We will introduce the LIS technology, green bodies and sintered parts will be shown and their microstructure and mechanical properties will be discussed.
For the additive manufacturing of large components typically powder-based methods are used. A powder is deposited layer by layer by means of a recoater, then, the component structure is printed into each individual layer. We introduce here the new method of local laser drying, which is a suspension-based method specially developed for the manufacturing of large voluminous ceramic parts. The structure information is directly written into the freshly deposited layer of suspension by laser drying. Initially, the technology was developed for ceramic suspensions, however, first experiments with geopolymers reveal a high potential for this class of materials. Metakaolin, fly ash and lithium aluminate-based one-part geopolymers were used in first experiments. The local annealing of the geopolymer slurry results in a drying and crosslinking reaction and, thus, in a local consolidation of the material. First parts made are introduced and their properties are discussed.
The layerwise slurry deposition (LSD) has been established in the recent years as a method for the deposition of ceramic powder layers. The LSD consists in the layer-by-layer deposition of a ceramic slurry by means of a doctor blade; each layer is sequentially deposited and dried to achieve a highly packed powder layer.
The combination of binder jetting and LSD was introduced as a novel technology named LSD-print. The LSD-print takes advantage of the speed of binder jetting to print large areas, parallel to the flexibility of the LSD, which allows the deposition of highly packed powder layers with a variety of ceramic materials.
The working principle and history of the LSD technology will be shortly discussed. A theoretical background will be also discussed, highlighting advantages and drawbacks of the LSD compared to the deposition of a dry powder.
The last part of the talk will be dedicated to highlight recent results on the LSD-print of SiSiC of geometrically complex components, in collaboration between BAM and HC Starck Ceramics GmbH. Density, microstructure and mechanical properties of LSD-printed and isostatic pressed samples will be discussed and compared.
During their lifetime, polymer components subjected to mechanical loads and environmental influences show a loss of their mechanical properties required for their specific applications. In this respect, the craze-crack damage mechanism slow crack growth (SCG) is relevant for PE-HD components used in high-performance applications such as pipes and containers for the storage and transport of dangerous goods. SCG is considered to be the major failure mechanism in polyolefins and it typically occurs suddenly and unexpectedly. Due to the fields of application, SCG is a safety relevant issue. To test for the resistance of PE-HD pipe and container materials against SCG, the full-notch creep test (FNCT) is widely applied in Europe. In this study, SCG phenomena in PE-HD are investigated in detail based on an improved FNCT, especially including the consideration of the influence of environmental liquids effecting the damage mechanism. Using an enhanced fracture surface and a crack propagation analysis with imaging techniques such as light microscopy (LM), laser scanning microscopy (LSM), X-ray computed tomography (CT-scan) and scanning electron microscopy (SEM), detailed data concerning SCG are obtained.
The combined application of FNCT and such imaging techniques is explicitly advantageous and recommended to gain important information on damage occurring to PE-HD induced by mechanical stress and the influence of environmental liquids, which is essential within the Fourth Industry Revolution.
Many metallic materials gain better mechanical properties through controlled heat treatments. For example, in age-hardenable aluminium alloys, the strengthening mechanism is based on the controlled formation of nanometre-sized precipitates, which represent obstacles to dislocation movement and consequently increase the strength. Precise tuning of the material microstructure is thus crucial for optimal mechanical behaviour under service condition of a component. Therefore, analysis of the microstructure, especially the precipitates, is essential to determine the optimum parameters for the interplay of material and heat treatment. Transmission electron microscopy (TEM) is utilized to identify precipitate types and orientations in the first step. Dark-field imaging (DF-TEM) is often used to image the precipitates and thereafter quantify their relevant dimensions. Often, these evaluations are still performed by manual image analysis, which is very time-consuming and to some extent also poses reproducibility problems.
Our work aims at a semantic representation of an automatable digital approach for this material specific characterization method under adaption of FAIR data practices. Based on DF-TEM images of different precipitation states of a wrought aluminium alloy, the modularizable, digital workflow of quantitative analysis of precipitate dimensions is described. The integration of this workflow into a data pipeline concept will also be discussed. Using ontologies, the raw image data, their respective contextual information, and the resulting output data of the quantitative image analysis can be linked in a triplestore. Publishing the digital workflow and the ontologies will ensure data reproducibility. In addition, the semantic structure enables data sharing and reuse for other applications and purposes, demonstrating interoperability.
Powder bed -based technologies are amongst the most successful Additive Manufacturing (AM) techniques. "Selective laser sintering/melting" (SLS/SLM) and "binder jetting 3D printing" (3DP) especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability.
However, the flowability of the powder used in these processes is essential to achieve defect-free and densely packed powder layers. For standard powder bed AM technologies, this limits the use of many raw materials which are too fine or too cohesive.
This presentation will discuss the possibilities to either optimize the powder raw material to adapt it to the specific AM process, or to develop novel AM technologies which are able to process powders in a wider range of conditions.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method which enables the use of very fine ceramic particles.
Powder bed -based technologies are amongst the most successful Additive Manufacturing (AM) techniques. "Selective laser sintering/melting" (SLS/SLM) and "binder jetting 3D printing" (3DP) especially are leading AM technologies for metals and polymers, thanks to their high productivity and scalability.
However, the flowability of the powder used in these processes is essential to achieve defect-free and densely packed powder layers. For standard powder bed AM technologies, this limits the use of many raw materials which are too fine or too cohesive.
This presentation will discuss the possibilities to either optimize the powder raw material to adapt it to the specific AM process, or to develop novel AM technologies which are able to process powders in a wider range of conditions.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method which enables the use of very fine ceramic particles. Another technology, the Gas Flow Assisted Powder Deposition, can increase the stability of the powder bed and the packing density, even in extreme conditions such as in absence of gravitational forces.
Laser powder bed fusion (LPBF) is an additive manufacturing process for materials which inherently tends to yield various degrees of metastable hierarchical microstructures, defects and high residual stresses in the as-built condition depending on the process parameters. The understanding of the evolution of these typical features during heat treatment and subsequent thermal and mechanical ageing is crucial for the wider acceptance for safety critical structures. A multi-disciplinary research project at BAM studying the development of the microstructure, defects, residual stresses typical of LPBF 316L and their evolution during thermal and mechanical ageing has led to insights into the stability of these inherent features. This presentation aims to give a broad overview of the project with a few specific cases of investigation. Firstly, the formation of residual stresses, the nature of the initial microstructure, the tensile properties and a modelling approach to understand the anisotropy will be presented. This will be followed by examples of studies of their evolution during heat treatment, long term thermal exposure, and room temperature and high temperature mechanical testing compared to a baseline of conventional wrought variant of the same alloy.
An overview of the BAM funed Focus Area Materials Project "AGIL" will be presented. AGIL focussed on the stdiy of the ageing characteristics of additively manufactured austenitic stainless steel with a "powder to mechanical failure" Approach. Recent Highlights are presented and a perspective for future studies.
The mechanical strength of wrought high-strength aluminum alloys is essentially based on precipitation hardening, possibly in combination with prior forming, e. g. by stretching. Important parameters for achieving an optimum combination of hardness, strength, ductility, toughness, and further properties such as corrosion resistance are age-hardening temperature and time.
During thermal (mechanical) treatment, nucleation and growth of precipitates takes place, leading to the desired degree of hardening. In aluminum alloys, precipitation sequences are usually passed through, i. e. a sequence of metastable precipitates is formed before the stable phase can precipitate. The optimum combination of properties is therefore based on a certain (optimum) microstructure, which can, however, change during the use of a component, since the microstructure is not stable. This happens in particular when the operating temperatures are close to the aging temperature and/or the operating times are sufficiently long. An external mechanical load may accelerate the processes. The presentation gives some examples for this.
Common air-coupled transducers for non-destructive testing consist of a piezocomposite material and several matching layers. Better acoustical matching to air is achieved by transducers based on charged cellular polypropylene (PP). This material has about hundred times lower acoustic impedance than any piezocomposite, having about the same piezoelectric coefficient. The piezoelectric properties of cellular PP are caused by the polarization of air cells. Alternatively, a ferroelectret receiver can be understood as a capacitive microphone with internal polarization creating permanent internal voltage. The sensitivity of the receiver can be increased by applying additional bias voltage. We present an ultrasonic receiver based on cellular PP including a high-voltage module providing bias voltage up to 2 kV. The application of bias voltage increased the signal by 12 to 15 dB with only 1 dB increase of the noise.
This receiver was combined with a cellular PP transmitter in through transmission to inspect several test specimens consisting of glass-fiber-reinforced polymer face sheets and a porous closed-cell PVC core. These test specimens were inspected before and after load. Fatigue cracks in the porous PVC core and some fatigue damage in the face sheets were detected. These test specimens were originally developed to emulate a rotor blade segment of a wind power plant. Similar composite materials are used in lightweight aircrafts for the general aviation. The other inspected test specimen was a composite consisted of glass-fiber-reinforced polymer face sheets and a wooden core. The structure of the wooden core could be detected only with cellular PP transducers, while commercial air-coupled transducers lacked the necessary sensitivity. Measured on a 4-mm thick carbon-fiber-reinforced polymer plate, cellular PP transducers with additional bias voltage achieved a 32 dB higher signal-to-noise ratio than commercial air-coupled transducers.
Die Strukturierung keramischer Grünfolien und Laminate ist ein wesentlicher Prozessschritt in der keramischen Multilayer-Technologie und begründet die funktionelle Vielfalt keramischer Multilayer. Benötigt wird die Grünbearbeitung für die Herstellung elektrischer und thermischer Vias sowie innerer Kavitäten und Kanäle für Transport und Lagerung von Gasen und Flüssigkeiten in hochintegrierten Schaltungsträgern, Sensoren und Reaktoren. Standardverfahren in der industriellen Fertigung sind Heißschneiden, Stanzen und Laserbearbeitung. Darüber hinaus werden auch Bohren, Fräsen, Sägen und Heißprägen verwendet. Über die Erprobung weiterer Verfahren wie Wasserstrahlschneiden, Dampfstrahlätzen und Powder Blasting wird in der Literatur berichtet.
Im Vortrag werden spezifische Vor- und Nachteile der eingesetzten Verfahren beleuchtet. Abschließend werden die Kriterien für die Auswahl des optimalen Strukturierungsverfahrens diskutiert. Zusammensetzung und Gefüge sowie die dadurch bedingten mechanischen und thermomechanischen Eigenschaften sowie das Absorptionsverhalten von Grünfolien sind sehr unterschiedlich. Daraus resultieren unterschiedliche optimale Bearbeitbarkeitsparameter.
The studied aluminium alloy is EN AW-2618A (2618A). It is very widely used for exhaust gas turbo-charger compressor wheels. Due to long operating times, high cycle fatigue (HCF) and material aging under the influence of temperatures up to 230 °C is particularly relevant for the wheels. The wheels are typically milled from round wrought blanks. From such round blanks, different testpieces are extracted and a comprehensive series of HCF tests is conducted at room temperature. The tests investigate the materials fatigue performance in the T61 state for two load-ratios, namely R = -1 and R = 0.1. Additionally, two overaged material states are tested, accounting for the aging process the material undergoes during long operating times at high temperatures. The experimental results are evaluated and compared to each other.
Furthermore, the design process of notched specimens is presented. With the notched specimens, it is aimed to quantify the notch sensitivity of the material. Relating thereto, two potential model parameters for the fatigue lifetime model are introduced.
The high operating temperatures of radial compressor wheels in exhaust gas turbochargers lead to abchange in the original microstructure of the heat-resistant aluminum alloy EN AW-2618A (overaging). This is caused by thermal loads that are close to the age hardening temperature and can even exceed it for a short time. The aging mechanisms have been investigated together with low cycle fatigue (LCF), thermomechanical fatigue (TMF) and creep up to max. 190 °C in previous research projects. The behavior of the alloy under high cycle fatigue (HCF) and the influence of load spectra have hardly been investigated. Since the operating temperatures of centrifugal compressors are expected to increase in the future, this research project investigated the HCF behavior at 230 °C, a test temperature significantly higher than the age hardening temperature. The objectives of the project were to establish a suitable experimental database, to understand the relevant microstructural processes, and to further develop and adapt suitable models and evaluation methods. In addition to a basic characterization of the HCF behavior in the initial condition T61, the experimental investigation program included targeted mechanical tests to isolate the influencing factors of mean stress (𝑅 = −1, 𝑅 = 0.1), material overaging (T61, 10 h/230 °C, 1000 h/230 °C), test temperature (20 °C, 230 °C), test frequency (0.2 Hz, 20 Hz) as well as variable amplitudes. On this basis, the models and evaluation methods developed in the previous projects were adapted and further developed to reflect thermal and mechanical loads in the lifetime assessment.
Due to the increasing scarcity of critical raw materials current high-temperature materials are sought to be replaced by alloys based on more abundant metals. One possibility within the class of intermetallics are iron aluminides, which combine sustainability and cost-efficiency with the prospect of mass savings. Iron aluminides show competitive specific strength up to 700 °C and excellent creep and wet corrosion resistance by small additions of Mo, Ti and B. Nevertheless, a Mo content of above 2 at.% which is needed for optimum corrosion resistance results in enhanced brittleness, especially at room temperature. This is why alloys with these Mo fractions were only mechanically tested under compressive loading so far. Still, testing of static and creep properties under tensile loading is required for reliable component design. Besides high standards for crack-free processing, data acquisition for tensile loads is especially complicated by environmental embrittling effects for iron aluminides. To cope with these challenges, the AiF research project “WAFEAL – Materials applications for iron aluminides” was initiated. The main goal is to collect standardised data on ambient and high-temperature tensile properties and creep properties. Samples with a nominal composition of Fe-26Al-4Mo-0.5Ti-1B [at.%] were manufactured via centrifugal casting in ceramic shell moulds followed by machining. Heat treatment for homogenisation and final polishing were carried out where appropriate. A summary of the achieved tensile and creep properties such as yield and tensile strength, maximum elongation, secondary creep rate and stress exponents will be given. Results will be also discussed regarding the influence of temperature, stress level and microstructure on the damage mechanisms. Furthermore, the effect of different alloy concentrations on the mechanical response at different temperatures will be outlined within a small experimental series.
Having been introduced almost two decades ago, Additive Manufacturing (AM) of metals has become industrially viable for a large variety of applications, including aerospace, automotive and medicine. Powder bed techniques such as Selective Laser Melting (SLM) based on layer-by-layer deposition and laser melt enable numerous degrees of freedom for the geometrical design. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The residual stress distribution in IN718 elongated prisms produced by SLM was studied non-destructively by means of neutron (bulk) and laboratory X-ray (surface) diffraction. The samples with different scanning strategies, i.e. hatching length, were measured in as-build condition (on a build plate) and after removal from the build plate.
The absolute values of all stress components decreased after removal from the build plate. Together with surface scan utilizing a coordinate-measuring machine (CMM), it is possible to link the stress release to the sample distortion. Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component depending on the thermal gradient in the respective direction.
Having been introduced almost two decades ago, Additive Manufacturing (AM) of metals has become industrially viable for a large variety of applications, including aerospace, automotive and medicine. Powder bed techniques such as Selective Laser Melting (SLM) based on layer-by-layer deposition and laser melt enable numerous degrees of freedom for the geometrical design. Developing during the manufacturing process, residual stresses may limit the application of SLM parts by reducing the load bearing capacity as well as induce unwanted distortion depending on the boundary conditions specified in manufacturing.
The residual stress distribution in IN718 elongated prisms produced by SLM was studied non-destructively by means of neutron (bulk) and laboratory X-ray (surface) diffraction. The samples with different scanning strategies, i.e. hatching length, were measured in as-build condition (on a build plate) and after removal from the build plate.
The absolute values of all stress components decreased after removal from the build plate. Together with surface scan utilizing a coordinate-measuring machine (CMM), it is possible to link the stress release to the sample distortion. Obtained results indicated different residual stress states for each of the transversal, longitudinal and normal component depending on the thermal gradient in the respective direction.
Ceramic multilayer technology is an attractive approach for the cost-effective fabrication of thermoelectric generators. Therefore, efforts are being made to co-sinter two promising thermoelectric oxides, namely calcium cobaltite and calcium manganate. In this study, calcium cobaltite, calcium manganate and release tapes were pressure assisted sintered. A major challenge here is the cracking of calcium manganate during cooling. A relationship between the properties of the release tape used in pressure-assisted sintering and the cracking behavior was observed experimentally.
To understand the origin of failure, formed reaction layers in the multilayer were analyzed by EDX and grazing incident XRD. Based on this analysis, bulk samples were prepared, and thermal expansion and Young's modulus and were determined thereon, if they were not known from the literature. The biaxial strength of the thermoelectric oxides was determined by the ball on three ball method.
The thermal stresses during cooling of different multilayer designs were estimated by finite element simulations. The stresses caused by the reaction layers turned out to be negligible. The FEM study indicated further, and a validation experiment proved, that the thickness of the release tape has the main effect on thermal stresses during cooling in single material. For best performance, the design of a thermoelectric multilayer generator needs to consider thermoelectric performance and thermal stresses during cooling.
High-performance composites, including glass-fiber reinforced plastic (GFRP) materials, are favored as a construction material for wind turbine rotor blades due to their high specific strength and stiffness properties. During the manufacturing process, however, imperfections are often introduced, then further propagated due to harsh environmental conditions and a variety of loads. This leads to failure significantly before their projected 20-year lifespan. As replacement of entire blades can be a costly potential outcome, localized repair of the damaged region to restore structural integrity and thus lengthen its lifespan has become an important issue in recent years. Rotor blades are often repaired using a common technique for composite laminates: adhesively bonded structural repair patches. These methods involve replacing the lost load path with a new material that is joined to the parent structure, and include scarf or plug repairs. However, there currently do not exist any standardized repair procedures for wind turbine rotor blades, as comparisons of blade properties repaired with the existing methods have not been studied in depth. Namely, there is a lack of understanding about the effects of various repair methods on the fatigue life of the shells of rotor blades. This study therefore aims to begin to fill this knowledge gap by testing the influence of different repair patches on the blades’ mechanical properties. Manufactured with the vacuum-assisted resin infusion process, the test specimens are produced as a curved structure with GFRP sandwiching a polyvinyl chloride foam core to best represent a portion of a rotor blade shell. Scarf repairs are then introduced with varying layup techniques, and material properties are examined with cyclical fatigue tests. Crack growth and development is monitored during fatigue testing by various non-destructive testing methods, including passive thermography with an infrared camera system, and a 3D deformation analysis system with ARAMIS. Large deformation fields and detection of in- and out-of-plane deformations is thus possible in-situ. The mechanical behavior and development of defects in the various repaired specimens is compared to each other as well as to reference test specimens with no repair patches. In-situ test data is combined with further non-destructive testing methods, including laminography, and active thermography, to develop a robust understanding of the effects of repair concepts.
Gypsum (CaSO4∙2H2O), bassanite (CaSO4∙0.5H2O), and anhydrite (CaSO4) are essential evaporite minerals for the evolution of hyper-arid surface environments on Earth and Mars (Voigt et al. 2019; Vaniman et al. 2018). The formation mechanism of especially anhydrite has been a matter of scientific debate for more than a century (van’t Hoff et al. 1903). To date, there exists no model that can reliably predict anhydrite formation at earth’s surface conditions. While thermodynamics favor its formation, it is hardly achieved on laboratory time scales at conditions fitting either the Atacama Desert on Earth, or the surface of Mars (Wehmann et al. 2023). In light of most recent developments (e.g. Stawski et al. 2016), that advocate for a complex, non-classical nucleation mechanism for all calcium sulphates, we present an analysis of natural samples from the Atacama Desert to identify key features that promote the nucleation and growth of anhydrite under planetary surface conditions. Our analyses reveal at least three distinct anhydrite facies, with differing mineralogy and micro- to nano-structures. The facies are (1) aeolian deposits with sub-μm grain sizes, (2) (sub-)surface nodules that formed from aeolian deposits and (3) selenites with secondary anhydrite rims. Possible mechanisms of their formation will be discussed.
Die Digitalisierung von Materialien und Prozessen stellt eine große Herausforderung dar, die nur durch eine Bündelung der Bemühungen aller Beteiligten in diesem Bereich erreicht werden kann. Bei einer derartigen digitalen Beschreibung spielen Datenanalysemethoden, eine Qualitätssicherung von Prozessen inklusive Input- und Output-Daten sowie die Interoperabilität zwischen Anwendungen nach den FAIR-Prinzipien eine wichtige Rolle. Dies umfasst das Speichern, Verarbeiten und Abfragen von Daten in einer vorzugsweise standardisierten Form (Beteiligung von Normungsgremien).
Zur Bewältigung dieser Herausforderung ist eine mit allen Stakeholdern konsistente Kontextualisierung der Materialdaten anzustreben, d.h. alle erforderlichen Informationen über den Zustand des Materials einschließlich produktions- und anwendungsbezogener Änderungen müssen über eine einheitliche, maschinenlesbare Beschreibung verfügbar gemacht werden. Dazu werden Wissensrepräsentationen und Konzeptualisierungen ermöglichende Ontologien verwendet. Eine zentrale Betrachtungsweise in diesem Zusammenhang ist die Realisierung von (automatisierten) Datenpipelines, die eine Beschreibung und Verfolgung von Daten ausgehend von ihrer Erzeugung, bspw. in einem Messgerät, bis zu ihrer globalen Verwendung in möglicherweise verschiedenen Kontexten beinhalten.
Erste Bemühungen und Ansätze zu diesen Problemstellungen führten im Projekt Innovations-Plattform Material Digital (PMD, materialdigital.de) zur Erstellung von Anwendungsontologien, die Prozesse und Testmethoden explizit beschreiben. Dabei wurde u.a. der Zugversuch an Metallen bei Raumtemperatur nach ISO 6892-1 ontologisch beschrieben. Diese als Beispiel dienende Ontologieentwicklung wird in dieser Präsentation vorgestellt. Weiterhin wurde, ausgehend von der domänenspezifischen Entwicklung von Anwendungsontologien, eine Kernontologie erstellt, die eine übergeordnete Verbindung von ontologischen Konzepten aufgrund der Verwendung gleichen Vokabulars und semantischer Verknüpfungen erlaubt. Diese sowie die das PMD-Projekt selbst werden ebenfalls in dieser Präsentation vorgestellt.
Recent advances in Deep Learning (DL) have significantly impacted the field of materials modelling. DL tools have been recently considered as promising tools to address the complex relationships among processing, microstructure and property of materials. The thermal stability of polycrystalline materials is a highly interesting and complex problem that could be addressed using DL techniques. The Multi-Phase-Field (MPF) method has emerged as a powerful tool for addressing grain growth phenomena from multiple perspectives. Unlike sharp-interface based methods, the MPF approach bypasses the need for detailed information on individual grains. In this work, we use DL to address issues related to MPF simulations of grain growth including numerical efficiency, computing speed, and resource consumption. This presents specific challenges for high-performance computing (HPC) due to the large datasets and complex computations required by both MPF and DL methods. We study various 3D microstructure settings with the goal of accelerating the simulation process while exploring different physical effects. In particular, the impact of grain boundary and triple junction energies on grain growth are to be investigated. The results will be presented in terms of the evolving size and shape distribution of the grains.
Corrosion Science Meets X-Rays, Neutrons and Electrons. The presentation gives an overview on current research activities applying in-situ X-ray diffraction and spectroscopy for a better understanding of fundamental mechanisms of high temperature corrosion. Additionally the knowledge gain by applying neutron powder diffraction and EBSD analysis is presented.
Im Rahmen des Vortrags werden die neusten Ergebnisse aus dem Fachbereich 5.3 zur Beschreibung des Ermüdungsverhaltens von FKV mittels Mikromechanischer-Modelle präsentiert. Explizit wird der theoretische Ansatz am Beispiel von GFK unter thermomechanischer Beanspruchung hergeleitet und an Hand von Versuchsergebnissen verifiziert.
Als elektrische Durchschlagfestigkeit bezeichnet man die elektrische Feldstärke, bei der es zur Entladung durch ein isolierendes Medium kommt. Im Falle von Festkörpern ist dies ein zerstörender Prozess. Bei der messtechnischen Bestimmung der Durchschlagfestigkeit haben neben den verwendeten Messgeräten auch die eingesetzten Elektroden, die Form des Prüfkörpers und das Isoliermedium, in dem die Prüfung stattfindet, einen signifikanten Einfluss auf die ermittelten Messwerte. Im Vortrag werden die Einflüsse erläutert und anhand von Messreihen aus der Literatur und der eigenen Forschung quantifiziert. Aufgrund der vorgestellten Effekte wird klar, dass es sich bei elektrischer Durchschlagfestigkeit nicht um absolute Materialkennwerte handelt, sondern vielmehr um systemabhängige Größen.
Im Vortrag werden das Messprinzip einer Photozentrifuge erläutert und die Anforderungen der zugrundeliegenden Normen diskutiert. Die praktische Durchführung der Messung und insbesondere auch die vorbereitenden Arbeiten, sowie die Auswertung der Rohdaten bilden den Schwerpunkt des Vortrags. Gezeigt werden auch die Validierung sowie ein Beispiel zur regelmäßigen Verifizierung des Verfahrens. Nach Anwendungsbeispielen und Vergleichen zu Ergebnissen mit anderen Messverfahren, wird das Verfahren in einer Zusammenfassung bewertet.
Im Vortrag werden das Messprinzip des Zentrifugen-Sedimentationsverfahrens erläutert und die Anforderungen der zugrundeliegenden Normen diskutiert. Es schließen sich umfangreiche Ausführungen zur praktischen Durchführung der Messung, insbesondere auch zu den vorbereitenden Arbeiten, sowie zur Auswertung der Rohdaten an. Gezeigt werden die Validierung sowie ein Beispiel zur regelmäßigen Verifizierung des Verfahrens. Nach Beispielen und Vergleichen zu Ergebnissen mit anderen Messverfahren, wird das Verfahren in einer Zusammenfassung bewertet.
Im Vortrag werden das Messprinzip des Zentrifugen-Sedimentationsverfahrens erläutert und die Anforderungen der zugrundeliegenden Normen diskutiert. Es schließen sich umfangreiche Ausführungen zur praktischen Durchführung der Messung, insbesondere auch zu den vorbereitenden Arbeiten, sowie zur Auswertung der Rohdaten an. Nach einem Vergleich der Ergebnisse mit anderen Messverfahren, wird das Verfahren in einer Zusammenfassung bewertet.
Im Vortrag werden das Messprinzip des Zentrifugen-Sedimentationsverfahrens erläutert und die Anforderungen der zugrundeliegenden Normen diskutiert. Es schließen sich umfangreiche Ausführungen zur praktischen Durchführung der Messung, insbesondere auch zu den vorbereitenden Arbeiten, sowie zur Auswertung der Rohdaten an. Nach einem Vergleich der Ergebnisse mit anderen Messverfahren, wird das Verfahren in einer Zusammenfassung bewertet.
Im Rahmen des 2. BAM-Akademie Info-Tages "Nano or not Nano" wurde die OECD TG 124 "Volume Specific Surface Area of Manufactured Nanomaterials" vorgestellt. Der Vortrag beschreibt detailliert das Messverfahren der He-Gaspyknometrie zur Bestimmung der Skelettdichte von Pulvern und geht auf Anwendbarkeit, Besonderheiten bei Nanopulvern und wichtige Einstellparameter für die Messung ein.
Im Rahmen des 2. BAM-Akademie Info-Tages "Nano or not Nano" wurde die OECD TG 124 "Volume Specific Surface Area of Manufactured Nanomaterials" vorgestellt.
Der Vortrag beschreibt die Bestimmung der spezifischen Oberfläche von dispersen und/oder porösen Pulvern mittels Gasadsorption nach dem BET-Verfahren.
Es wird auf die Anwendbarkeit der Methode eingegangen und es werden praktische Hinweise zur Probenvorbereitung und Messung von Nanomaterialien gegeben.