5 Werkstofftechnik
Filtern
Dokumenttyp
Sprache
- Englisch (354)
- Mehrsprachig (5)
- Deutsch (1)
- Russisch (1)
Referierte Publikation
- ja (361) (entfernen)
Schlagworte
- Additive manufacturing (21)
- EBSD (16)
- Additive Manufacturing (14)
- Microstructure (14)
- Corrosion (12)
- Residual stress (12)
- Transmission electron microscopy (12)
- Creep (11)
- Glass (9)
- Crystallization (8)
- Fatigue (7)
- Mechanical properties (7)
- Sintering (7)
- Steel (7)
- Aging (6)
- Carbon steel (6)
- High entropy alloy (6)
- High temperature corrosion (6)
- SEM (6)
- 3D printing (5)
- Bioactive glass (5)
- Degradation (5)
- Electron microscopy (5)
- Laser powder bed fusion (5)
- Metallic glasses (5)
- Neutron diffraction (5)
- Ontology (5)
- Oxidation (5)
- Plasticity (5)
- Alumina (4)
- CALPHAD (4)
- Ceramics (4)
- EXAFS (4)
- Electron backscatter diffraction (4)
- Fracture (4)
- HIP (4)
- High entropy alloys (4)
- Impurities (4)
- Kikuchi patterns (4)
- Lattice parameters (4)
- Martensite (4)
- Metallic glass (4)
- Nanoindentation (4)
- Plastic deformation (4)
- Scanning electron microscopy (4)
- Vickers indentation (4)
- X-ray diffraction (4)
- Zirconia (4)
- 3D-Printing (3)
- AISI 304L (3)
- AISI 316L (3)
- CCS (3)
- Calcination (3)
- Carbon fibres (3)
- Ceramic (3)
- Dislocation (3)
- Environmental stress cracking (ESC) (3)
- Finite element analysis (3)
- Fracture toughness (3)
- Full notch creep test (FNCT) (3)
- General Materials Science (3)
- Glass transition (3)
- Grain boundary (3)
- Hydrogen (3)
- Inconel 718 (3)
- Interfacial strength (3)
- Iron (3)
- Laser scanning microscopy (LSM) (3)
- Molecular dynamics (3)
- NMR spectroscopy (3)
- Nanoparticles (3)
- Nickel-based superalloys (3)
- Pattern matching (3)
- Phase-field simulation (3)
- Raman spectroscopy (3)
- Reproducibility (3)
- Self-healing (3)
- Single crystal (3)
- Stress intensity factor (3)
- Stress relaxation (3)
- Superalloy (3)
- TEM (3)
- Thermal expansion (3)
- Ti-6Al-4V (3)
- ToF-SIMS (3)
- X-ray refraction (3)
- 3D-printing (2)
- AGIL (2)
- Alloy design (2)
- Aluminum alloys (2)
- Atom probe tomography (2)
- Bacteria (2)
- Binder jetting (2)
- Bioactivity (2)
- Bioceramics (2)
- Bone regeneration (2)
- Bulk metallic glasses (2)
- CCUS (2)
- Calcium cobaltite (2)
- Characterization (2)
- Compositionally complex alloys (2)
- Computed Tomography (2)
- Computed tomography (2)
- Condensate (2)
- Coulomb explosion (2)
- CrCoNi (2)
- Crack growth (2)
- Crack healing (2)
- Crack propagation (2)
- Crop protection products (2)
- Crystal orientation (2)
- Crystal plasticity (2)
- Damage (2)
- Debinding (2)
- Deep Learning (2)
- Defects (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Deuterium (2)
- Diffusion (2)
- Diopsid (2)
- Elastic constants (2)
- Environmental stress cracking (2)
- Foaming (2)
- Fractography (2)
- Fracture mechanics (2)
- GFRP (2)
- Geothermal (2)
- Glass ceramic (2)
- Glass-ceramic (2)
- Gold (2)
- Grain boundaries (2)
- Heat treatment (2)
- High-density polyethylene (2)
- High-entropy alloy (2)
- High-temperature corrosion (2)
- IN718 (2)
- Infrared spectroscopy (2)
- Internal friction (2)
- Interphase (2)
- Kikuchi diffraction (2)
- Kikuchi pattern (2)
- LPBF (2)
- LTCC (2)
- Laser Powder Bed Fusion (2)
- Lattice distortion (2)
- Layerwise slurry deposition (2)
- Low cycle fatigue (2)
- Lunar regolith (2)
- Machine Learning (2)
- Mars (2)
- Martensitic transformation (2)
- Mechanical Engineering (2)
- Mechanics of Materials (2)
- Microhardness (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure and texture (2)
- Microstructure evolution (2)
- Mobility (2)
- Modeling (2)
- Nanomaterials (2)
- Native oxide (2)
- Nickel alloys (2)
- Nickel-base superalloys (2)
- Ontologies (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- P92 (2)
- Permeability (2)
- Phase transformations (2)
- Phase-field (2)
- Polyethylene (2)
- Polymer (2)
- Preceramic polymer (2)
- Precipitation (2)
- Pressure-assisted sintering (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Reaction-sintering (2)
- Relaxation (2)
- S-Phase (2)
- SIMS (2)
- Sample preparation (2)
- Selective laser melting (2)
- Shape-memory alloys (2)
- Shear bands (2)
- Short-range order (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single-crystals (2)
- Slow crack growth (SCG) (2)
- Sorption (2)
- Spray drying (2)
- Stress corrosion cracking (2)
- Sulfidation (2)
- Sulphidation (2)
- Superalloys (2)
- Superconducting magnet (2)
- Surface treatments (2)
- Tempered martensite-ferritic steel (2)
- Tensile properties (2)
- Tensile testing (2)
- Texture (2)
- Thermodynamics (2)
- Thermoelectric properties (2)
- Thermography (2)
- Toughness (2)
- Transmission electron microscopy (TEM) (2)
- Viscosity (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- 12%Cr steel (1)
- 316L (1)
- 316L stainless steel (1)
- 3D etching (1)
- 3D metallography (1)
- 3D-Metallographie (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 9-12%Cr steel (1)
- Abrasion (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Advanced high strength steels (1)
- Ageing (1)
- Aggressive environments (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al2O3 (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alloy (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alumina coatings (1)
- Aluminium alloys (1)
- Aluminosilicate glasses (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Amorphization (1)
- Analytical scanning electron microscopy (1)
- Angle measurement (1)
- Approximant (1)
- Aquifer fluid (1)
- Artificial weathering (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic stainless steel (1)
- Austenitic steel 316L (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated image analysis (1)
- BTEX (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Biaxial strength (1)
- Bimodal distribution (1)
- Binder Jetting (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio Ceramics (1)
- Bio active ceramic (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Biodiesel (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Biosensor (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Brinell hardness (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bruchflächen (1)
- Bubble formation (1)
- Burst (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CKAN (1)
- CO2 (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calculated intrinsic fracture toughness (1)
- Carbide phase NbC (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon capture (1)
- Carbon capture and storage (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon nanotubes (1)
- Casing (1)
- Cavitation (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement (1)
- Cement-based materials (1)
- Ceramic multilayer (1)
- Ceramic multilayers (1)
- Cerium oxide (1)
- Chalcogenides (1)
- Characterisation (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Chemometrics (1)
- Chrystal orientation (1)
- Classification (1)
- Clay ISRU (1)
- Co-firings (1)
- Coating (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Composite recycling (1)
- Compositionally complex alloy (1)
- Concrete (1)
- Concrete 3D-printing (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Continnum damage model (1)
- Cooling rate (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion costs (1)
- Corrosion fatigue (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- CrMnFeCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack evolution (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Crack tip opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB (1)
- DCB geometry (1)
- Data Interoperability (1)
- Data analysis (1)
- Data infrastructures (1)
- Data mapping (1)
- Data pipeline (1)
- Data processing (1)
- Datenbank (1)
- Debonding (1)
- Defect population (1)
- Defects engineering (1)
- Deformation (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Dental (1)
- Deposition microstructure (1)
- Design of experiment (1)
- Desorption (1)
- Destabilization (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Diesel (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Digitalizations (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Discrete element method (1)
- Dislocation avalanches (1)
- Disorientation (1)
- Distributed fiber optic sensing (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Dry preparation (1)
- Drywood termite (1)
- Ductile iron (1)
- Dwell periods (1)
- Dwell times (1)
- Dynamic recrystallization (1)
- EFTEM (1)
- EN AW-2618A (1)
- Early oxidation (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Elastic energy (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elasticity (1)
- Electric conductivity (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron beam-induced charging (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron energy (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Energy distribution (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmentally assisted cracking (1)
- Epitaxial films (1)
- Epoxy (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR principles (1)
- FAIR research data management (1)
- FIB Tomography (1)
- FSDC (1)
- Fabrication (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Fatigue Testing (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue performance (1)
- Fatigue striations (1)
- Fatigue testing (1)
- Fe-Mn steels (1)
- Femtosecond laser (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Filters (1)
- Finite element method (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- Flowability (1)
- Four-point bending test (1)
- Fourier series (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Fraktographie (1)
- Freeze casting (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (1)
- Full notch creep test (1)
- Fullerite (1)
- Fungi (1)
- GD-OES (1)
- GMR (1)
- GMR sensors (1)
- Gefügeanalyse (1)
- Gefügerekonstruktion (1)
- General Computer Science (1)
- General Engineering (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming (1)
- Glass forming melts (1)
- Glass manufacturing (1)
- Glass powder (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary engineering (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granules (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- HEA (1)
- Hardness (1)
- Hausner ratio (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High alloyed steel (1)
- High density polyethylene (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Homogenization (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen storage (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- IASCC (1)
- IN 718 (1)
- ISRU (1)
- Impact damage (1)
- Impact wear (1)
- In situ diffraction (1)
- In situ tensile test (1)
- In situ thermal-annealing experiment (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interfacial shear strength (1)
- Interlaboratory comparability (1)
- Intermetallic (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Interoperable (1)
- Intrinsic stress (1)
- Invar (1)
- Ion beam erosion Sectioning (1)
- Ionic porosity (1)
- Iron meteorite (1)
- Irradiation (1)
- Isostatic hot pressing (HIP) (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kidney injury (1)
- Kikuchi bands (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- LIBS (1)
- LSD print (1)
- Laboratory X-ray diffraction (1)
- Laser (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser ablation in liquid (1)
- Laser beam melting (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser powder-based directed energy deposition (1)
- Lateral flow (1)
- Lattice distortions (1)
- Lattice misfit (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Laves phase (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Li-ion battery (1)
- Light curing (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Long-term storage (1)
- Lorenz transmission electron microscopy (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-cycle fatigue (1)
- Low-loading (1)
- MEA (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- MOUSE (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Manufacturing (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Mass transport (1)
- Master curve (1)
- Material degradation (1)
- Material failure (1)
- Material modeling (1)
- Materials Modelling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical deformation (1)
- Medium Entropy Alloys (1)
- Medium entropy alloy (1)
- Medium entropy alloys (1)
- Melt pool boundary (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metallic Glass (1)
- Metallic materials (1)
- Methodology (1)
- Micro-shrinkages (1)
- Microplastic stress (1)
- Microplastics (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural evolution (1)
- Microstructure Design (1)
- Microstructure analysis (1)
- Microstructure, γ/γ' misfit (1)
- Microstrucure reconstruction (1)
- Microwave technology (1)
- Milling (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Mixed Ca-K-Na phosphates (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Model (1)
- Moisture (1)
- Molten salt (1)
- Moon (1)
- Multiaxial deformation (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NGS (1)
- Na and K rhenanites (1)
- Nano-composite (1)
- Nano-powder (1)
- Nano-scratch test (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanoparticle structure (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure quantification (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Neutron Diffraction (1)
- NiMaGa (1)
- NiTi (1)
- Nickel-base alloy (1)
- Niobium alloying (1)
- Nitride (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Notch (1)
- Nucleation (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Optical and Magnetic Materials (1)
- Optical centrifugation (1)
- Optical criterion of brittleness (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxygen evolution reaction (1)
- PBF-LB/M/316L (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Parametric modeling (1)
- Particle morphology (1)
- Particle size (1)
- Particle-bed binder jetting (1)
- Passive components and circuits (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase separation (1)
- Phase stability (1)
- Phase transformation (1)
- Phase-Field Simulations (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Pipeline (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platinum-group-metals (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Porcelain (1)
- Pore (1)
- Pores (1)
- Porosification (1)
- Porosity (1)
- Porous materials (1)
- Portable sensor (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Power factor (1)
- Power law (1)
- Precipitate shape (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Pseudosymmetry (1)
- Pultruded fiber rods (1)
- Radon transform (1)
- Reaction Sintering (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Recommendations (1)
- Recycling (1)
- Reference data (1)
- Refractory alloy (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Reliability (1)
- Residual Stress (1)
- Residual Stresses (1)
- Residual strains (1)
- Residual stresses (1)
- Resistance spot welding (1)
- Resonance testing (1)
- Reusable data (1)
- Review (1)
- Roughness (1)
- Round Robin (1)
- S-phase (1)
- SDC (1)
- SEM micrography (1)
- SLM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Safety assessment (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Schadensanalyse (1)
- Schwingstreifen (1)
- Scratches (1)
- Segregation (1)
- Segregation engineering (1)
- Selective Laser Melting (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Serial sectioning (1)
- Serienschnitte (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear modulus (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicoborate glasses (1)
- Silicon Carbide (1)
- Silicon release (1)
- Silver metallization paste (1)
- Simulation (1)
- Simulation of concrete (1)
- Simulation workflow (1)
- Single crystal Ni-Base superalloys (1)
- Single fiber pull-out test (1)
- Single-Crystal (1)
- Single-crystal (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Slip localization (1)
- Slow crack growth (1)
- Slurry (1)
- Slurry optimization (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica (1)
- Soda-lime-silica glass (1)
- Sodium ion batteries (1)
- Softening temperature (1)
- Soil (1)
- Sol-gel coating (1)
- Solar panels (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solubility (1)
- Space (1)
- Spar cap design (1)
- Specimen geometry (1)
- Spinodal decomposition (1)
- Split-vacancy defect complexes (1)
- Stable crack growth (1)
- Stainless steel (1)
- Standardisation (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Steels (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural steel (1)
- Subcritical crack growth (1)
- Sulfiding (1)
- Superalloy single crystals (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface crystallization (1)
- Surface elasticity (1)
- Surface energy (1)
- Surface modification (1)
- Surface nucleation (1)
- Surface roughness (1)
- Surface stress (1)
- Swept wavelength interferometry (1)
- Symmetric dwell periods (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synthesis (1)
- T1 precipitate (1)
- TIG-welding (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile strength (1)
- Tensile tests (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal desorption mass spectrometry (1)
- Thermo-mechanical loading (1)
- Thermobimetal (1)
- Thermoelectric oxide (1)
- Thermoelectric oxides (1)
- Thermoelectrics (1)
- Thermomechanical fatigue (1)
- Thermoplastic (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thickening (1)
- Thin films (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Titanium (1)
- Titanium oxide (1)
- Topography (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon-polymerization (1)
- UV-irradiation (1)
- Ultrasonic assited machining (1)
- Ultrasound (1)
- Under cyclic loading (1)
- Unidirectional composites (1)
- Upconversion (1)
- Upconverting nanoparticles (1)
- Utilization, and storage (CCUS) technology (1)
- Vickers hardness (1)
- Viscoelastic model (1)
- Viscoplasticity (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume changes (1)
- Volume fraction (1)
- Volume specific surface area (1)
- WAXS (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Water-based (1)
- Weibull distribution (1)
- Welding (1)
- Wet chemical etching (1)
- Whole-chain CCS scenario (1)
- Work of adhesion (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRD (1)
- Young's modulus (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- Zirconia: yttria stabilized (1)
- ZnO (1)
- aerosol deposition method (ADM) (1)
- arbidic austempered ductile iron (1)
- battery aging mechanism (1)
- calcium cobaltite (1)
- current collector corrosion (1)
- depth profiles (1)
- electron microscopy (1)
- high pressure (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- microstructural changes (1)
- negative crystal growth (1)
- phosphate glasses (1)
- thermoelectric oxide (1)
- thermoelectrics (1)
- water speciation (1)
- µ-gravity (1)
- γ- и γ'-фазы, период кристаллической решетки (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
- высокие температуры (1)
- жаропрочные нике- левые сплавы (1)
- монокристалл (1)
- рентгеноструктурный анализ (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (361) (entfernen)
Paper des Monats
- ja (11)
Giant magneto-resistive (GMR) sensor based metal magnetic memory (MMM) technique is proposed for mapping of deformation-induced self-magnetic leakage fields (SMLFs) in carbon steel. The specimens were subjected to different amounts of tensile deformation and the deformation-induced SMLFs were measured using a GMR sensor after unloading the specimens. 3D-nonlinear finite element modeling was performed to predict stress–strain state in a steel specimen under tensile load. The experimentally obtained SMLF images were correlated with the finite element model predicted stress–strain states. Studies reveal that the MMM technique can detect the plastic deformation with signal-to-noise ratio better than 20 dB. The technique enables the mapping of plastic deformation in carbon steels for the evaluation of the severity of deformation. The study also reveals that deformation-induced SMLF is influenced by the presence of initial surface residual stress, introduced by shot peening. The intensity of SMLF signal is found to increase with increase in tensile load and decrease with shot peening.
Here we demonstrate that by applying exclusively Martian resources a processing route involving suspensions of mineral particles called slurries or slips can be established for manufacturing ceramics on Mars. We developed water-based slurries without the use of additives that had a 51 wt. % solid load resembling commercial porcelain slurries in respect to the particle size distribution and rheological properties. These slurries were used to slip cast discs, rings and vases that were sintered at temperatures between 1000 and 1130 °C using different sintering schedules, the latter were set-up according the results of hot-stage microscopic characterization. The microstructure, porosity and the mechanical properties were characterized by SEM, X-ray Computer tomography and Weibull analysis. Our wet processing of minerals yields ceramics with complex shapes that show similar mechanical properties to porcelain and could serve as a technology for future Mars colonization. The best quality parts with completely vitrificated matrix supporting a few idiomorphic crystals are obtained at 1130 °C with 10 h dwell time with volume and linear shrinkage as much as ~62% and ~17% and a characteristic compressive strength of 51 MPa.
We invented the first non-metallic, self-adhesive and dry biosignalling electrode. The PEDOT polymer electrode changes its aggregate state and conductivity by a light curing procedure. The electrode can be applied as a gel underneath hair without shaving. With the aid of blue light, the electrode can be hardened within a few seconds at the desired location on the scalp. The cured polymer electrode is highly conductive and can be applied on a very small location. Unlike other EEG electrodes, our electrode does not lose conductivity upon drying. Furthermore, our electrode strongly bonds to Skin and does not require any additional adhesive. Short circuits due to an outflow of gel are prevented with this technique. Therefore, the PEDOT polymer electrode is extremely well suited for applications that, up to now, have been challenging, such as non-invasive EEG recordings from awake and freely moving animals, EEG recordings from preterm babies in the neonatal intensive care unit or long-term recordings in the case of sleep monitoring or epilepsy diagnostics. We addressed two technical questions in this work. First, is the EEG recorded with polymer electrodes comparable to a standard EEG? Second, is it possible to record full-band EEGs with our electrodes?
Additive Manufacturing (AM) through the Selective Laser Melting (SLM) route offers ample scope for producing geometrically complex parts compared to the conventional subtractive manufacturing strategies. Nevertheless, the residual stresses which develop during the fabrication can limit application of the SLM components by reducing the load bearing capacity and by inducing unwanted distortion, depending on the boundary conditions specified during manufacturing. The present study aims at characterizing the residual stress states in the SLM parts using different diffraction methods. The material used is the nickel based superalloy Inconel 718. Microstructure as well as the surface and bulk residual stresses were characterized. For the residual stress analysis, X-ray, synchrotron and neutron diffraction methods were used. The measurements were performed at BAM, at the EDDI beamline of -BESSY II synchrotronand the E3 line -BER II neutron reactor- of the Helmholtz-Zentrum für Materialien und Energie (HZB) Berlin. The results reveal significant differences in the residual stress states for the different characterization techniques employed, which indicates the dependence of the residual state on the penetration depth in the sample. For the surface residual stresses, longitudinal and transverse stress components from X-ray and synchrotron agree well and the obtained values were around the yield strength of the material. Furthermore, synchrotron mapping disclosed gradients along the width and length of the sample for the longitudinal and transverse stress components. On the other hand, lower residual stresses were found in the bulk of the material measured using neutron diffraction. The longitudinal component was tensile and decreased towards the boundary of the sample. In contrast, the normal component was nearly constant and compressive in nature. The transversal component was almost negligible. The results indicate that a stress re-distribution takes place during the deposition of the consecutive layers. Further investigations are planned to study the phenomenon in detail.
Glass-ceramics are noted for their unusual combination of properties and manifold commercialized products for consumer and specialized markets. Evolution of novel glass and ceramic processing routes, a plethora of new compositions, and unique exotic nano- and microstructures over the past 60 years led us to review the Definition of glass-ceramics. Well-established and emerging processing methods, such as co-firing, additive manufacturing, and laser patterning are analyzed concerning the core requirements of processing glass-ceramics and the Performance of the final products. In this communication, we propose a revised, updated definition of glass-ceramics, which reads “Glass-ceramics are inorganic, non-metallic materials prepared by controlled crystallization of glasses via different processing methods. They contain at least one type of functional crystalline phase and a residual glass. The volume fraction crystallized may vary from ppm to almost 100%”.
Glasses with compositions of 21Gd2O3-63MoO3-(16-x)B2O3-xTeO2 (mol%) (x= 0, 2, 4, 8) were prepared using a conventional melt quenching technique, and the crystallization behavior of ferroelastic β′-Gd2 MoO4)3 Crystals was examined to clarify the mechanism of self-powdering phenomenon and to design bulk crystallized glasses. It was found that the self-powdering phenomenon appeared significantly during the crystallization at temperatures near the crystallization peak temperature, but the phenomenon is suppressed in the crystallization at temperatures much higher than the glass transition temperature. It was also found that the substitution of TeO2 for B2O3 in the base glasses suppresses the self-powdering phenomenon and consequently bulk crystallized glasses were obtained in the glass with x=8 mol%. The densities at room temperature of the base glasses are d =4.755–4.906 g/cm3, being much higher than the value of d=4.555 g/cm3 for β′-Gd2(MoO4)3 crystal. It is proposed that the stresses in the inside of crystals induced by large density differences (i.e., large molar volume differences) between the glassy phase and crystals might be relaxed effectively in the glasses containing TeO2 with weak TeeO bonds and fragile character.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
Tunable microwave devices will play an important role in future wireless systems, in which high-frequency bands, e.g. millimeter waves, will become promising, due to its huge spectrum availability. At such frequency bands, liquid crystals (LCs) exhibit low microwave loss, which is excellent compared with the other tuning elements. In this paper, LC-based microwave components are fabricated by using low temperature co-fired ceramic technology, allowing the integration of the LC into microwave structures. The first component, the Amplitude tuner, controls the signal’s amplitude by using the interference concept, which exhibits a tunable attenuation range from 11 dB to 30 dB at 30 GHz. The second component is a 3-pole tunable bandpass filter, which is realized by using a substrate integrated waveguide topology, enabling a device with comparatively high-quality factors (Q-factors). The measurement results show Q-factors in the range of 68 to 100 for a frequency tuning of 29.4–30.1 GHz, i.e. a tuning range of 700 MHz, accompanied by an insertion loss 2 dB to 4 dB.
The residual stress distribution in IN718 elongated prisms produced by Selective Laser Melting was studied by means of neutron (bulk) and laboratory X-ray (surface) diffraction.
Two deposition hatch lengths were considered. A horizontal plane near the top surface (perpendicular to the building direction) and a vertical plane near the lateral surface (parallel to the building direction) were investigated. Samples both in as-built (AB) condition and removed (RE) from the base plate were characterized.
While surface stress fields seem constant for AB condition, X-ray diffraction shows stress gradients along the hatch direction in the RE condition. The stress profiles correlate with the distortion maps obtained by tactile probe measurements.
Neutron diffraction shows bulk stress gradients for all principal components along the main sample directions. We correlate the observed stress patterns with the hatch length, i.e. with its effect on temperature gradients and heat flow. The bulk stress gradients partially disappear after removal from the baseplate.
Commercial grade-1 titanium samples (Ti, 99.6%) were treated using three alternative methods, (i) femtosecond laser processing, (ii) thermal heat treatment, and (iii) electrochemical anodization, respectively, resulting in the formation of differently conditioned superficial titanium oxide layers. The laser processing (i) was carried out by a Ti:sapphire laser (pulse duration 30 fs, central wavelength 790 nm, pulse repetition rate 1 kHz) in a regime of generating laser-induced periodic surface structures (LIPSS). The experimental conditions (laser fluence, spatial spot overlap) were optimized in a sample-scanning setup for the processing of several square-millimeters large surface areas covered homogeneously by these nanostructures. The differently oxidized titanium surfaces were characterized by optical microscopy, micro Raman spectroscopy, variable angle spectroscopic ellipsometry, and instrumented indentation testing. The tribological performance was characterized in the regime of mixed friction by reciprocating sliding tests against a sphere of hardened steel in fully formulated engine oil as lubricant. The specific tribological performance of the differently treated surfaces is discussed with respect to possible physical and chemical mechanisms.
Shear testing can contribute to a better understanding of the plastic deformation of Ni-base superalloy single crystals. In the present study, shear testing is discussed with special emphasis placed on its strengths and weaknesses. Key mechanical and microstructural results which were obtained for the high-temperature (T ≈ 1000 °C) and low-stress (τ ≈ 200 MPa) creep regime are briefly reviewed. New 3D stereo STEM images of dislocation substructures which form during shear creep deformation in this regime are presented. It is then shown which new aspects need to be considered when performing double shear creep testing at lower temperatures (T < 800 °C) and higher stresses (τ > 600 MPa). In this creep regime, the macroscopic crystallographic [11−2](111) shear system deforms significantly faster than the [01−1](111) system. This represents direct mechanical evidence for a new planar fault nucleation scenario, which was recently suggested (Wu et al. in Acta Mater 144:642–655, 2018). The double shear creep specimen geometry inspired a micro-mechanical in-situ shear test specimen. Moreover, the in-situ SEM shear specimen can be FIB micro-machined from prior dendritic and interdendritic regions. Dendritic regions, which have a lower γ′ volume fraction, show a lower critical resolved shear stress.
A wide range of solid-state synthesis routes for calcium manganate is reported in the literature, but there is no systematic study about the influence of the solid-state synthesis conditions on thermoelectric properties. Therefore, this study examined the influence of calcination temperature and calcination cycles on the Seebeck coefficient, electrical conductivity, and thermal conductivity. Higher calcination temperatures and repeated calcination cycles minimized the driving force for sintering of the synthesized powder, leading to smaller shrinkage and lower densities of the sintered specimens. As the electrical conductivity increased monotonously with increasing density, a higher energy input during calcination caused deterioration of electrical conductivity. Phase composition and Seebeck coefficient of sintered calcium manganate were not influenced by the calcination procedure. The highest thermoelectric properties with the highest power factors and figures of merit were obtained by means of reaction-sintering of uncalcined powder.
Calcium cobaltite is one of the most promising oxide p-type thermoelectric materials. The solid-state reaction (or calcination, respectively), which is well known for large-scale powder synthesis of functional materials, can also be used for the synthesis of thermoelectric oxides. There are various calcination routines in literature for Ca3Co4O9 powder synthesis, but no systematic study has been done on the influence of calcination procedure on thermoelectric properties. Therefore, the influence of calcination conditions on the Seebeck coefficient and the electrical conductivity was studied by modifying calcination temperature, dwell time, particle size of raw materials and number of calcination cycles. This study shows that elevated temperatures, longer dwell times, or repeated calcinations during powder synthesis do not improve but deteriorate the thermoelectric properties of calcium cobaltite. Diffusion during calcination leads to idiomorphic grain growth, which lowers the driving force for sintering of the calcined powder. A lower driving force for sintering reduces the densification. The electrical conductivity increases linearly with densification. The calcination procedure barely influences the Seebeck coefficient. The calcination procedure has no influence on the phase formation of the sintered specimens.
A great amount of material properties is strongly influenced by dislocations, the carriers of plastic deformation. It is therefore paramount to have appropriate tools to quantify dislocation substructures with regard to their features, e.g., dislocation density, Burgers vectors or line direction. While the transmission electron microscope (TEM) has been the most widely-used equipment implemented to investigate dislocations, it usually is limited to the two-dimensional (2D) observation of three-dimensional (3D) structures. We reconstruct, visualize and quantify 3D dislocation substructure models from only two TEM images (stereo pairs) and assess the results. The reconstruction is based on the manual interactive tracing of filiform objects on both images of the stereo pair. The reconstruction and quantification method are demonstrated on dark field (DF) scanning (S)TEM micrographs of dislocation substructures imaged under diffraction contrast conditions. For this purpose, thick regions (> 300 nm) of TEM foils are analyzed, which are extracted from a Ni-base superalloy single crystal after high temperature creep deformation. It is shown how the method allows 3D quantification from stereo pairs in a wide range of tilt conditions, achieving line length and orientation uncertainties of 3% and 7°, respectively. Parameters that affect the quality of such reconstructions are discussed.
The granules commonly yielded by spray drying procedures exhibit a hard shell and an irregular, dimpled shape, which is often described as donut-like morphology. Sintered parts produced from such granules suffer from microstructural defects and reduced mechanical properties resulting from these disadvantageous granule properties.
Using the example of alumina, zirconia and zirconia-toughened alumina (ZTA) batches, this paper shows that the morphology of the granules can be tuned by adjusting slurry stability. High zeta potential is essential to optimally disperse the particles. But to achieve spherical and soft granules the electrostatic repulsion forces between the particles should be reduced before spray granulation. Electrostatic repulsion forces were changed with the addition of nitric acid. Measurements of zeta potential and viscosity, as well as sedimentation investigations with an optical centrifuge were used for precise slurry assessment as a major precondition for optimal and reproducible adjustment of slurries before spray drying. Sedimentation analysis using an optical centrifuge was performed to investigate different influences like that of additive composition, solids content or pH-value on the sedimentation behavior. Adequately flocculated slurries lead to homogeneous, soft granules that can be easily deformed and pressed. The fraction of donut-shaped particles and the rigidity of granules were reduced. Consequently, the sintered parts produced from these granulates show improvements regarding porosity, pore size distribution, sintered density and biaxial strength.
Subsurface characterization of high-strength high-interstitial austenitic steels after impact wear
(2018)
The microstructure of the subsurface after impact wear of three high-strength high interstitial austenitic steels has been analysed using transmission electron microscopy (TEM) in alloys with C and N as interstitial elements. In all cases, a nanocrystalline region followed by a transition zone and a cold-worked area are present. Additionally, microhardness and nano-scratching tests were conducted to study the wear-related properties of the impact subsurface and the base material. The results of the microstructural analysis reveal that the following mechanisms are involved during impact wear: abrasion (ploughing), microcrack formation associated with contact fatigue, entrapment and adhesion of SiO2 particles. The analysis of the wear-related properties indicates that the subsurface acts as a self-protective layer that prevents the deterioration of the substrate.
The sintering behavior and the thermoelectric performance of Ca3Co4O9 multilayer laminates were studied, and a multilayer thermoelectric generator was fabricated. Compacts and multilayer samples with anisotropic microstructure and residual porosity were obtained after conventional sintering at 920 °C, whereas dense and isotropic multilayer samples were prepared by firing at 1200 °C and reoxidation at 900 °C. A hot-pressed sample has a dense and anisotropic microstructure. Samples sintered at 920 °C exhibit low electrical conductivity due to the low density, whereas the Seebeck coefficient is not sensitive to preparation conditions. However, thermal conductivity of multilayers is very low, and, hence acceptable ZT values are obtained. A ransversal multilayer thermoelectric generator (TMLTEG) was fabricated by stacking layers of Ca3Co4O9 green tapes, AgPd conductor printing, and co-firing at 920 °C. The TMLTEG has a power output of 3 mW at ΔT =200 K in the temperature interval of 25 °C to 300 °C.
It is widely accepted that the magnetic state of a ferromagnetic material may be irreversibly altered by mechanical loading due to magnetoelastic effects. A novel standardized nondestructive testing (NDT) technique uses weak magnetic stray fields, which are assumed to arise from inhomogeneous deformation, for structural health monitoring (i.e., for detection and assessment of damage). However, the mechanical and microstructural complexity of damage has hitherto only been insufficiently considered. The aim of this study is to discuss the phenomenon of inhomogeneous “self-magnetization” of a polycrystalline ferromagnetic material under inhomogeneous deformation experimentally and with stronger material-mechanical focus. To this end, notched specimens were elastically and plastically deformed. Surface magnetic states were measured by a three-axis giant magnetoresistant (GMR) sensor and were compared with strain field (digital image correlation) and optical topography measurements. It is demonstrated that the stray fields do not solely form due to magnetoelastic effects. Instead, inhomogeneous plastic deformation causes topography, which is one of the main origins for the magnetic stray field formation. Additionally, if not considered, topography may falsify the magnetic signals due to variable lift-off values. The correlation of magnetic vector components with mechanical tensors, particularly for multiaxial stress/strain states and inhomogeneous elastic-plastic deformations remains an issue.
Abstract While classically used to visualise the magnetic microstructure of functional materials (e.g., for magnetic applications), in this study, the Bitter technique was applied for the first time to visualise macroscopic deformation gradients in a polycrystalline low-carbon steel. Spherical indentation was chosen to produce a multiaxial elastic–plastic deformation state. After removing the residual imprint, the Bitter technique was applied, and macroscopic contrast differences were captured in optical microscopy. To verify this novel characterisation technique, characteristic “hemispherical” deformation zones evolving during indentation were identified using an analytical model from the field of contact mechanics. In addition, near-surface residual stresses were determined experimentally using synchrotron radiation diffraction. It is established that the magnetic domain distribution contrast provides deformation-related information: regions of different domain wall densities correspond to different “hemispherical” deformation zones (i.e., to hydrostatic core, plastic zone and elastic zone, respectively). Moreover, the transitions between these three zones correlate with characteristic features of the residual stress profiles (sign changes in the radial and local extrema in the hoop stress). These results indicate the potential of magnetic domain distribution imaging: visualising macroscopic deformation gradients in fine-grained ferromagnetic material with a significantly improved spatial resolution as compared to integral, mean value-based measurement methods.
Microplastics are increasingly entering marine, limnic and terrestrial ecosystems worldwide, where they sorb hydrophobic organic contaminants. Here, the sorption behavior of the fuel-related water contaminants benzene, toluene, ethyl benzene and xylene (BTEX) and four tertiary butyl ethers to virgin and via UV radiation aged polypropylene (PP) and polystyrene (PS) pellets was investigated. Changes in material properties due to aging were recorded using appropriate polymer characterization methods, such as differential scanning calorimetry, Fourier transform infrared spectroscopy, gel permeation chromatography, X-ray photoelectron spectroscopy, and microscopy.
Pellets were exposed to water containing BTEX and the ethers at 130-190 mg/L for up to two weeks.
Aqueous sorbate concentrations were determined by headspace gas chromatography. Sorption to the polymers was correlated with the sorbate's Kow and was significant for BTEX and marginal for the ethers.
Due to substantially lower glass transition temperatures, PP showed higher sorption than PS. Aging had no effect on the sorption behavior of PP. PS sorbed less BTEX after aging due to an oxidized surface layer.
The research focus of this study was set on the corrosion process of condensate as droplets on the surface of carbon steels (X52, X70) martensitic steel UNS S41500, and super austenite UNS N08031 in CO2 atmosphere with impurities at 278 K (to simulate the offshore transportation condition in a buried pipeline). The possibility of dew/droplet formation on the steel surface and wetting behavior of corresponding materials were evaluated by contact angle measurement in dense CO2 at 278 K. To observe the effect of impurities (SO2 and O2) on droplet corrosion process, exposure tests were carried out in the mixed atmosphere with a drop, 1 ‑ 10 µL in volume, of CO2 saturated ultra-pure water on steel surface. Comparable exposure tests were carried out with the same gas mixture and the same volume of water, as vapor, to observe the droplet formation and the corrosion process that follows. Effects of surface roughness on the droplet formation and its corrosion process were further studied and showed no significant role upon long time exposure. The results from droplet experiments were compared to those from the bulk electrolyte for the further recommendation on the quality control of gas stream along with the use of carbon steels as transport pipelines in CCS - Carbon Capture and Storage system.