5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (384)
- Vortrag (327)
- Posterpräsentation (98)
- Beitrag zu einem Tagungsband (60)
- Forschungsdatensatz (22)
- Buchkapitel (6)
- Dissertation (4)
- Beitrag zu einem Sammelband (3)
- Sonstiges (3)
- Corrigendum (1)
Sprache
- Englisch (909) (entfernen)
Schlagworte
- Additive Manufacturing (61)
- Additive manufacturing (57)
- Corrosion (56)
- Microstructure (37)
- Creep (30)
- Glass (30)
- Transmission electron microscopy (29)
- EBSD (28)
- Ontology (27)
- Fatigue (26)
- Sintering (19)
- Ceramics (18)
- Crack growth (18)
- CCS (17)
- Residual stress (17)
- Degradation (16)
- Steel (16)
- Crystallization (15)
- Ceramic (13)
- High entropy alloys (13)
- Oxidation (13)
- High temperature corrosion (12)
- 316L (11)
- Aging (11)
- CCUS (11)
- Carbon steel (11)
- Scanning electron microscopy (11)
- Ti-6Al-4V (11)
- 3D printing (10)
- CALPHAD (10)
- CO2 (10)
- Coarsening (10)
- Electron microscopy (10)
- High entropy alloy (10)
- Mechanical properties (10)
- Nanoparticles (10)
- Neutron diffraction (10)
- Alloy 2618A (9)
- Crystal plasticity (9)
- Diffraction (9)
- Glass fiber reinforced polymers (9)
- Impurities (9)
- Laser powder bed fusion (9)
- SEM (9)
- Water speciation (9)
- X-ray diffraction (9)
- Alumina (8)
- Aluminium (8)
- DCB (8)
- EN AW-2618A (8)
- FAIR (8)
- Fractography (8)
- Geothermal (8)
- High-temperature corrosion (8)
- Hydrogen (8)
- Machine Learning (8)
- Martensitic steel (8)
- Nickel-base superalloys (8)
- Slurry (8)
- Thermoelectrics (8)
- Anisotropy (7)
- Layerwise slurry deposition (7)
- Mechanical testing (7)
- S-phase (7)
- Soda-lime silicate glass (7)
- Sulfidation (7)
- TEM (7)
- Water content (7)
- AGIL (6)
- AISI 316L (6)
- Aluminium alloy (6)
- Bioactive glass (6)
- CO2 quality (6)
- Digitalization (6)
- Environmental stress cracking (6)
- Heat treatment (6)
- LTCC (6)
- Lattice parameters (6)
- Metallic glasses (6)
- Particle size (6)
- Powder (6)
- Selective laser melting (6)
- Semantic Web Technologies (6)
- Supercritical/dense phase CO2 (6)
- Thermomechanical fatigue (6)
- Vickers (6)
- Viscosity (6)
- Wind turbine blades (6)
- CCU (5)
- Carbon capture (5)
- Carbon steels (5)
- Computed Tomography (5)
- Creep behavior (5)
- Damage (5)
- Data Interoperability (5)
- Dislocation (5)
- Droplet corrosion (5)
- Electron backscatter diffraction (5)
- Fe-Al alloys (5)
- Foaming (5)
- High alloyed steel (5)
- High-density polyethylene (5)
- In situ (5)
- Inconel 686 (5)
- Intermetallics (5)
- Iron aluminides (5)
- Knowledge Representation (5)
- LCF (5)
- Low Cycle Fatigue (5)
- Modeling (5)
- Nanoindentation (5)
- Non-destructive testing (5)
- P92 (5)
- PMD Core Ontology (5)
- Pipeline (5)
- Pipeline network (5)
- Plasticity (5)
- Plattform MaterialDigital (5)
- Polymer (5)
- Polymer matrix composites (5)
- Reference data (5)
- Residual Stress (5)
- Sandwich (5)
- Semantic Interoperability (5)
- Shear modulus (5)
- Superaustenite steel (5)
- Texture (5)
- ToF-SIMS (5)
- Transmission electron microscopy (TEM) (5)
- VSSA (5)
- Vickers indentation (5)
- X-ray refraction (5)
- Young's modulus (5)
- 3D-printing (4)
- AISI 304L (4)
- Additive Fertigung (4)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Aluminum alloys (4)
- Binder Jetting (4)
- Calcination (4)
- Calcium cobaltite (4)
- Carbon capture storage (4)
- Carbon dioxide (4)
- Characterization (4)
- Coating (4)
- Composite (4)
- Compositionally complex alloys (4)
- Concrete (4)
- Crack propagation (4)
- Crack tip opening displacement (4)
- Crystal orientation (4)
- Deuterium (4)
- Diffusion (4)
- EXAFS (4)
- Elastic modulus (4)
- Environmental stress cracking (ESC) (4)
- FAIR data management (4)
- Fatigue crack growth (4)
- Finite element analysis (4)
- Fracture (4)
- Fracture toughness (4)
- Full Notch Creep Test (4)
- GD-OES (4)
- HIP (4)
- High Cycle Fatigue (4)
- High temperature (4)
- High-entropy alloy (4)
- High-entropy alloys (4)
- IN718 (4)
- In-space manufacturing (4)
- Inconel 718 (4)
- Internal friction (4)
- Kikuchi patterns (4)
- Knowledge graph and ontologies (4)
- Laser Powder Bed Fusion (4)
- Low cycle fatigue (4)
- Martensite (4)
- Mechanical behavior (4)
- Metallic glass (4)
- Microgravity (4)
- Microplastics (4)
- Microstrucrue Design (4)
- Microstructural characterization (4)
- Microstructure Design (4)
- Microstructure evolution (4)
- Molecular dynamics (4)
- NTE (4)
- Orientation (4)
- PE-HD (4)
- Pattern matching (4)
- Phase-field simulation (4)
- Pitting (4)
- Plastic deformation (4)
- Polyaniline (4)
- Precipitation (4)
- Raman spectroscopy (4)
- Recommendations (4)
- Roughness (4)
- SIMS (4)
- Sample preparation (4)
- Scale-bridging (4)
- Scarf repairs (4)
- Simulation (4)
- Spray drying (4)
- Stress relaxation (4)
- Superalloy (4)
- Tensile test (4)
- Ultrasound (4)
- Virtual experiments (4)
- Welding (4)
- Whole-chain CCS scenario (4)
- 3D-Printing (3)
- Ab-initio (3)
- Advanced ceramics (3)
- Aluminium Alloy (3)
- Binder jetting (3)
- Bioceramics (3)
- Biodiesel (3)
- Brinell hardness (3)
- Carbon Fiber Reinforced Plastics (3)
- Carbon fibres (3)
- Cement (3)
- Ceramic spring (3)
- Chemically complex alloy (3)
- Composites (3)
- Computed tomography (3)
- Corrosion Fatigue (3)
- Corrosion fatigue (3)
- Coulomb explosion (3)
- Crack Propagation (3)
- Crack evolution (3)
- Crack healing (3)
- Creep data (3)
- Creep-fatigue (3)
- Dark-field transmission electron microscopy (3)
- Dark-field transmission electron microscopy (DFTEM) (3)
- Data mapping (3)
- Defects (3)
- Destabilization (3)
- Dielectric breakdown (3)
- Dielectric strength (3)
- Diesel (3)
- Diffraction Enhanced Imaging (3)
- Digital image correlation (3)
- Diopside (3)
- Elastic constants (3)
- Environmental Stress Cracking (3)
- FIB (3)
- Ferritic-martensitic steels (3)
- Fracture Toughness (3)
- Fracture mechanics (3)
- Fracture surface (3)
- Fracture surface analysis (3)
- Full-Notch Creep Test (FNCT) (3)
- GFRP (3)
- General Materials Science (3)
- Glas (3)
- Glass ceramic (3)
- Glass powder (3)
- Glass transition (3)
- Glass-ceramic (3)
- Glass-ceramics (3)
- Gold nanoparticles (3)
- Grain boundaries (3)
- Grain boundary (3)
- Grain boundary engineering (3)
- High Entropy Alloy (3)
- High temperature mechanical properties (3)
- ISRU (3)
- In situ tensile test (3)
- Interfacial strength (3)
- Iron (3)
- Iron oxide nanoparticles (3)
- Kikuchi diffraction (3)
- Kikuchi pattern (3)
- Laser (3)
- Laser ablation in liquid (3)
- Laser beam melting (3)
- Laser cladding (3)
- Lattice misfit (3)
- Layerwise Slurry Deposition (3)
- Lightweight materials (3)
- Lithium Ion Batteries (3)
- Mechanical Engineering (3)
- Mechanics of Materials (3)
- Metadata schema (3)
- Microhardness (3)
- Multilayer (3)
- NMR spectroscopy (3)
- Nano-powder (3)
- Nanomaterials (3)
- Nickel-based superalloys (3)
- Oxide Glasses (3)
- Permeability (3)
- Phase transformations (3)
- Phase-field (3)
- Polyethylene (3)
- Porosity (3)
- Pressure-assisted sintering (3)
- Referenzdaten (3)
- Relaxation (3)
- Reproducibility (3)
- Residual Stresses (3)
- Residual stresses (3)
- Rotor blade (3)
- Round Robin (3)
- SLM (3)
- Selective Laser Melting (3)
- Self-healing (3)
- Shape-memory alloys (3)
- SiO2 (3)
- Silicate Glasses (3)
- Silicon Carbide (3)
- Single crystal (3)
- Single-crystals (3)
- Sol-gel (3)
- Sol-gel coating (3)
- Solid-state (3)
- Solubility (3)
- Spectroscopy (3)
- Stress intensity factor (3)
- Sulfiding (3)
- Superalloys (3)
- Surface crystallization (3)
- Surface energy (3)
- Syngle Crystal alloy (3)
- TDEP (3)
- Temperature (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile Test (3)
- Tensile data (3)
- Tensile testing (3)
- Thermal expansion (3)
- Thermo-Mechanical Fatigue (3)
- Thermomechanics (3)
- Titanium (3)
- Titanium oxide (3)
- Topography (3)
- UV-irradiation (3)
- Utilization (3)
- Viscoplasticity (3)
- Wind turbine blade shells (3)
- XRD (3)
- Zirconia (3)
- µ-gravity (3)
- μ-gravity (3)
- AM (2)
- Adiabatic calorimeter (2)
- Ageing (2)
- Agglomerates (2)
- Aggressive environment (2)
- Air-coupled ultrasonic testing (2)
- Airborne ultrasonic testing (2)
- Al2O3 (2)
- Alloy design (2)
- Aluminosilicate glasses (2)
- Aluminum alloy (2)
- Analysis (2)
- Annealing (2)
- Aquifer (2)
- Atom probe tomography (2)
- Austenitic stainless steel (2)
- Austenitic steel 316L (2)
- Automation (2)
- Bacteria (2)
- Biaxial strength (2)
- Bio Ceramics (2)
- Bioactive Glass (2)
- Bioactivity (2)
- Biofilm (2)
- Bond energy (2)
- Bone regeneration (2)
- Brittle fracture (2)
- CO2-storage (2)
- Capture (2)
- Carbon (2)
- Carbon capture and storage (2)
- Carbon storage (2)
- Casting (2)
- CeO2 (2)
- Ceria (2)
- Chemo-mechanical coupling (2)
- Chromium oxide (2)
- Coatings (2)
- Condensate (2)
- Condensation (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Corrosion resistance (2)
- CrMnFeCoNi (2)
- Crack propagation analysis (2)
- Creep-Fatigue (2)
- Crevice corrosion (2)
- Crop protection products (2)
- Cross linking (2)
- Cure process (2)
- Cyclic softening (2)
- Data Management (2)
- Data Structures (2)
- Data analysis (2)
- Data management (2)
- Dataset (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Dental (2)
- Depth-profiling (2)
- Dielectric properties (2)
- Diffraction contrast (2)
- Diffusion coefficient (2)
- Digital material representation (2)
- Digitization (2)
- Digtial Representation (2)
- Diopsid (2)
- Dispersion process (2)
- Distribution function (2)
- Ductile iron (2)
- Dynamic mechanical analysis (DMA) (2)
- EDX (2)
- EDXRD (2)
- Early oxidation (2)
- Elastic microstructure (2)
- Elasticity (2)
- Electron beam induced modification (2)
- Electron beam-induced fragmentation (2)
- Electron diffraction (2)
- Electron energy (2)
- Electron-beam-induced modification (2)
- Electronic Lab Notebook (2)
- Energy distribution (2)
- Environmentally assisted cracking (2)
- FAIR Data Management (2)
- FAIR data (2)
- Fatigue damage (2)
- Fatigue of sandwich shell structures (2)
- Fatigue performance (2)
- FeCr- alloys (2)
- Ferroelectret (2)
- Fiber reinforced polymer (2)
- Flowability (2)
- Fracture Surface Analysis (2)
- Fracture surface energy (2)
- Full notch creep test (FNCT) (2)
- Fungi (2)
- Gitterkonstanten (2)
- Glass composition (2)
- Glass forming (2)
- Gold (2)
- Granules (2)
- Hard machining (2)
- Hardness (2)
- High Alloyed Steel (2)
- High Entropy Alloys (2)
- High Temperature Corrosion (2)
- High Temperature Testing (2)
- Hot pressing (2)
- Hot stage microscopy (2)
- Hydrogen permeation (2)
- IR (2)
- Imaging techniques (2)
- In-situ (2)
- Inconel 625 (2)
- Infrared spectroscopy (2)
- Infrastructure (2)
- Injection (2)
- Interfacial shear strength (2)
- Interphase (2)
- Inverted classroom (2)
- Ionic porosity (2)
- Joined nickel-based alloys (2)
- Kikuchi (2)
- Knowledge Graph (2)
- LPBF (2)
- LSD-print (2)
- Laminography (2)
- Laser scanning microscopy (LSM) (2)
- Lattice distortion (2)
- Layerwise (2)
- Lead borate glasses (2)
- Li-ion battery (2)
- Long-term behavior (2)
- Long-term storage (2)
- Lorenz transmission electron microscopy (2)
- Lunar habitat (2)
- Lunar regolith (2)
- Lunar regolith simulant (2)
- MOUSE (2)
- Manganese oxide (2)
- Mars (2)
- Martensitic transformation (2)
- Mass transport (2)
- Material degradation (2)
- Material digital (2)
- Materials Modelling (2)
- Materials science (2)
- Medium Entropy Alloys (2)
- Melt pool boundary (2)
- Metal seal (2)
- Micro-shrinkages (2)
- Micromechanical model (2)
- Microstructural analysis (2)
- Microstructural evolution (2)
- Microstructure analysis (2)
- Microstructure and texture (2)
- Microstructure-property-correlation (2)
- Mikrostruktur (2)
- Mixed Ca-K-Na phosphates (2)
- Mixed gas atmosphere (2)
- Monte-Carlo Simulation (2)
- Multilayer technology (2)
- NDT (2)
- NFDI (2)
- Na and K rhenanites (2)
- Nano powder (2)
- Nanostructure quantification (2)
- Native oxide (2)
- Neutron Diffraction (2)
- Nickel alloys (2)
- Nickel-base alloy (2)
- Niobium alloying (2)
- Notches (2)
- Nucleation (2)
- Ontology development (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxidation behavior (2)
- Oxyfuel (2)
- PBF-LB/M/316L (2)
- PMD (2)
- PMDco (2)
- Particle morphology (2)
- Paving (2)
- Phase change material (2)
- Phase diagram (2)
- Phase separation (2)
- Phase transformation (2)
- Phase-Field Simulations (2)
- Phasenidentifikation (2)
- Photon counting detector (2)
- Polyethylene, PE-HD (2)
- Porcelain (2)
- Pores (2)
- Preceramic polymer (2)
- Pressure assisted sintering (2)
- Process monitoring (2)
- Protective coating (2)
- Push-out Test (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Ratio refinement (2)
- Reaction sintering (2)
- Reaction-sintering (2)
- Recycling (2)
- Reference material (2)
- Refractory high entropy alloys (2)
- Ressidual stress (2)
- Review (2)
- S-Phase (2)
- S355 steel sheet (2)
- SAXS (2)
- Safety assessment (2)
- Salt eutectics (2)
- Scanning transmission electron microscopy (STEM) (2)
- Semantic Representation (2)
- Semantic web (2)
- Shear bands (2)
- Short-range order (2)
- Sibayak (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver nanoparticle (2)
- Silver-glass-metallization-paste (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Sintering additives (2)
- Slow crack growth (2)
- Slow crack growth (SCG) (2)
- Soda-lime-silica glass (2)
- Solar sintering (2)
- Sorption (2)
- Space (2)
- Spring constant (2)
- Stainless steel (2)
- Standard (2)
- Standardization (2)
- Starch (2)
- Starch nanoparticle (2)
- Steels (2)
- Storage (2)
- Stress corrosion cracking (2)
- Sulphidation (2)
- Superconducting magnet (2)
- Supercritical CO2 (2)
- Surface (2)
- Surface Energy (2)
- Surface treatments (2)
- Synchrotron Tomography (2)
- Synthetic air (2)
- TED-GC-MS (2)
- Tensile Properties (2)
- Tensile Test Ontology (2)
- Tensile properties (2)
- Thermal Spray (2)
- Thermal energy storage (2)
- Thermodynamics (2)
- Thermoelectric (2)
- Thermoelectric oxide (2)
- Thermoelectric oxides (2)
- Thermoelectric properties (2)
- Thermography (2)
- Thermogravimetry (2)
- Thermoset polymers (2)
- Transmission electron microscope (TEM) (2)
- Transparent ceramics (2)
- Two Photon Polymerization (2)
- Under cyclic loading (2)
- Utilization, and storage (CCUS) technology (2)
- Vickers hardness (2)
- Viscous sintering (2)
- Volume specific surface area (2)
- Wall thickness (2)
- Weibull Distribution (2)
- Wetting (2)
- Wind energy (2)
- Wind turbine (2)
- Wood protection (2)
- X-Ray Diffraction (2)
- X-ray absorption spectroscopy (2)
- X-ray laminography (2)
- XANES (2)
- Zero-g (2)
- corrosion (2)
- 12%Cr steel (1)
- 150 Years (1)
- 2PP (1)
- 3D (1)
- 3D Reconstruction (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D imaging (1)
- 3D materialography (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 5G (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- AFM (1)
- ATZ (1)
- Abrasion (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Acid-leaching (1)
- Acids (1)
- Active thermography (1)
- Adiabatic shear bands (1)
- Adolf Martens (1)
- Advanced high strength steels (1)
- Advanced manufacturing (1)
- Advanced wastewater treatment (1)
- Aerospace (1)
- Aggressive environement (1)
- Aggressive environments (1)
- Aggressive gases (1)
- Aging mechanisms (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li alloys (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alkali-activated materials (1)
- Alloy (1)
- Alloy 2818A (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alpha-tricalcium phosphate (1)
- Alumina coatings (1)
- Alumina toughened zirconia (1)
- Aluminium alloys (1)
- Aluminum (1)
- Aluminum Alloy Aging (1)
- Amorphization (1)
- Amorphous silica (1)
- Analytical scanning electron microscopy (1)
- Analytical services (1)
- Angle measurement (1)
- Anhydrite (1)
- Approximant (1)
- Aquifer fluid (1)
- Artefact (1)
- Artificial weathering (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atomic packing factor (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Atomization (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic cast iron (1)
- Austenitic steel (1)
- Austenitischer Stahl (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automatische Finite Element Simulation (1)
- BTEX (1)
- BTS (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Bimodal distribution (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio active ceramic (1)
- Bio-ceramic engineering (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Bioceramic (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Bioresorbable (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Blended learning (1)
- Blähen (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Breakdown strength (1)
- Brittle / ductile fracture behavior (1)
- Brown-rot fungi (1)
- Bubble formation (1)
- Bulk metallic glasses (1)
- Burst (1)
- Burst test (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CALPHAD databases analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CLS (1)
- CO2 Corrosion (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 separation membranes (1)
- CO2-corrosion (1)
- Cabon capture and storage (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calculated intrinsic fracture toughness (1)
- Calibration (1)
- Cantor alloy (1)
- Carbide phase NbC (1)
- Carbidic austempered ductile iron (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fibers (1)
- Carbon Fibre (1)
- Carbon capture, utilization and storage technology (1)
- Carbon fibre-reinforced-plastics (1)
- Carbon nanotubes (1)
- Casing (1)
- Catalogue of services (1)
- Cavitation (1)
- Ccs (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement-based materials (1)
- Centrifugal casting (1)
- Ceramic multilayer (1)
- Ceramic nano particles (1)
- Ceramic springs (1)
- Ceramics 3D printing (1)
- Cerium oxide (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Chalcogenides (1)
- Characterisation (1)
- Charpy test (1)
- Chemically Complex Alloy (1)
- Chemically complex alloys (1)
- Chemometrics (1)
- Chromatography (1)
- Chromia (1)
- Chrystal orientation (1)
- Clay ISRU (1)
- Co-axial monitoring (1)
- Co-firing (1)
- Co-segregation (1)
- Co2-Storage (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Complex concentrated alloy (CCA) (1)
- Complex loading (1)
- Component assessment (1)
- Composite pressure vessels (1)
- Composite recycling (1)
- Composite structures (1)
- Composite testing (1)
- Compositionally complex alloy (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Coniophora puteana (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Contamination (1)
- Cooling rate (1)
- Cooling simulations (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion costs (1)
- Corrosion mechanism (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Cow stress (1)
- Cr2O3 (1)
- CrCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Cracks (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Critical energy release rate (1)
- Crop protection formulations (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB geometry (1)
- DED-L (1)
- DLS (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage evolution (1)
- Damage mechanisms (1)
- Data Exchange (1)
- Data Fusion (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data fusion (1)
- Data infrastructures (1)
- Data linking (1)
- Data processing (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Debinding (1)
- Debonding (1)
- Deep Learning (1)
- Deep learning (1)
- Defect detection (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation behavior (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Demonstrators (1)
- Dense phase (1)
- Density (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Dentine (1)
- Deposition microstructure (1)
- Desorption (1)
- Die casting (1)
- Dielectric Spectroscopy (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction Elastic Constants (1)
- Diffusivity (1)
- Digital representation (1)
- Digital representations (1)
- Digital workflows (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Dislocation avalanches (1)
- Dislocation substructure (1)
- Dislocations (1)
- Disordered assemblies (1)
- Disorientation (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distributed fiber optic sensing (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Diversity (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Driving physical mechanism (1)
- Droplet (1)
- Dry preparation (1)
- Drywood termite (1)
- Dual-energy (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- Dynamic mechanical analysis (1)
- Dynamic recrystallization (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EC4SafeNano (1)
- EFTEM (1)
- EIS (1)
- EN AW 2618A a (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Elastic energy (1)
- Elastic properties (1)
- Electric conductivity (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical deposition (1)
- Electrochemical dressing (1)
- Electrochemical impedance spectroscopy (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electron Microscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron beam-induced charging (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- Electropolishing (1)
- Enamel (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Endurance Limit (1)
- Environment (1)
- Environmental Stress Cracking (ESC) (1)
- Epitaxial films (1)
- Epoxy (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Etching (1)
- European Centre (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR Data (1)
- FAIR research data management (1)
- FCH JU (1)
- FIB Tomography (1)
- FNCT (1)
- FSDC (1)
- Fabrication (1)
- Fabrication method (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Failure test (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue Testing (1)
- Fatigue crack propagation (1)
- Fatigue crack propagation stages (1)
- Fatigue fracture (1)
- Fatigue of sandwich structures (1)
- Fe-Mn steels (1)
- Feldspar (1)
- Fem (1)
- Femtosecond laser (1)
- Ferritic Alloys (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fiber (1)
- Fiber reinforced polymers (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Film depositition (1)
- Filters (1)
- Fine Powder (1)
- Finite element method (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- First year students (1)
- Flipped classroom (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Focussed ion beam growth (1)
- Force-distance diagram (1)
- Four-point bending test (1)
- Fourier series (1)
- Fourier transform infrared spectroscopy (1)
- Fracture Mechanics (1)
- Fracture behavior (1)
- Fracture surfaces (1)
- Fragility (1)
- Freeze Drying (1)
- Freeze casting (1)
- Fresnoit (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (FNCT) (1)
- Full notch creep test (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- Functional fatigue (1)
- Fused Filament Fabrication (1)
- GMR (1)
- GMR sensors (1)
- Gas flow assisted powder deposition (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasgehalt (1)
- Gefüge (Werkstoffkunde) (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- Geometrical factors (1)
- Geopolymers (1)
- Glass Ceramic (1)
- Glass Fibres (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymer (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass fibre reinforced plastics (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Gold nanoparticle synthesis (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Graphic design (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- Gypsum (1)
- HEA (1)
- HV-Insulation (1)
- Hardness test (1)
- Hausner ratio (1)
- Heat Treatment (1)
- Heat Treatments (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Heißgasextraktion (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High - temperature corrosion (1)
- High Voltage Insulation (1)
- High alloyed steels (1)
- High cycle fatigue (1)
- High density polyethylene (1)
- High entropy superalloys (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (PE-HD) (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Hochentropie-Legierung (1)
- Hochentropielegierung (1)
- Homogenization (1)
- Honing (1)
- Honing Stone (1)
- Horizon 2020 (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hybrid Manufacturing (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen permeability (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- Hyper-arid (1)
- IASCC (1)
- IN 718 (1)
- IN738LC (1)
- IR spectroscopy (1)
- Imaging (1)
- Impact damage (1)
- Impact wear (1)
- Implant failures (1)
- Implants (1)
- In situ diffraction (1)
- In situ thermal-annealing experiment (1)
- In-Situ Testing (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-situ tomography (1)
- In-vivo (1)
- In718 (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 686 coating (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Indentation hardness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Initial attachment (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interface (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interlaboratory comparability (1)
- Intermetallic (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Interoperability (1)
- Intrinsic stress (1)
- Invar (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Ion beam erosion Sectioning (1)
- Iron meteorite (1)
- Iron oxide (1)
- Irradiation (1)
- Irregular topography (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Knowledge Graphs (1)
- Knowledge graph (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Kriechen (1)
- Kristallisation (1)
- L-PBF (1)
- LIBS (1)
- LMD (1)
- LSD print (1)
- LTCC multilayer (1)
- Laboratory X-ray diffraction (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Powder Bed fusion (1)
- Laser Scanning Microscopy (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser beam melting (LBM) (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laser light scattering (1)
- Laser powder-based directed energy deposition (1)
- Laser-induced slip casting (1)
- Lattice distortions (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Lattices (1)
- Laves phase (1)
- Layer depostion (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Lecture films (1)
- Lecture videos (1)
- Legierung mit komplexer Zusammensetzung (1)
- Life cycle (1)
- Lifetime prediction (1)
- Light curing (1)
- Lightweighting (1)
- Limestone Filler (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Lithium-ion batteries (1)
- Lithography-based technologies (1)
- Local landscape evolution (1)
- Localized plasmons (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Low-loading (1)
- MEA (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Manufacturing (1)
- Martensitic steel (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Master curve (1)
- Mat-o-lab (1)
- Material Digital (1)
- Material characterization (1)
- Material defects (1)
- Material failure (1)
- Material modeling (1)
- Material oxidation (1)
- MaterialDigital (1)
- Materials Chemistry (1)
- Materials Science (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical Behavior (1)
- Mechanical and thermal testing (1)
- Mechanical anisotropy (1)
- Mechanical deformation (1)
- Mechanistic Modelling (1)
- Medium entopy alloy (1)
- Medium entropy alloys (1)
- Medium-entropy alloy (1)
- Mehrskalenmodell (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metal powder characterization (1)
- Metallic Glass (1)
- Metallic components (1)
- Metallic materials (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metals and Alloys (1)
- Metformin (1)
- Methodology (1)
- Metrology (1)
- Micro computed tomography (1)
- Microbiologically influenced corrosion (1)
- Micromanipulation (1)
- Microplastic stress (1)
- Microsegregation (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural orientation (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure modification (1)
- Microstructure, γ/γ' misfit (1)
- Microwave technology (1)
- Mid-Level Ontology for MSE (1)
- Mikroplastik (1)
- Milling (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Missing acknowledgment (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Mn3O4 (1)
- Mobility (1)
- Model (1)
- Moisture (1)
- Molecular Dynamics (1)
- Molten salt (1)
- Monte-Carlo-Analysis (1)
- Moon (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial deformation (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multilayertechnik (1)
- Multiple cracks (1)
- NFDI-MatWerk (1)
- NGS (1)
- NMR (1)
- Nano CRM (1)
- Nano metal fluorides (1)
- Nano particle (1)
- Nano screening (1)
- Nano-assemblies (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-composite (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nano-safety (1)
- Nano-scratch test (1)
- NanoCAM (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanomaterial screening (1)
- Nanoparticle structure (1)
- Nanoparticle synthesis (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Negative charged microparticle (1)
- Net zero (1)
- Networking (1)
- New standards (1)
- Ni-Mn-Ga (1)
- Ni-Resist (1)
- NiMaGa (1)
- NiTi (1)
- Nickel based coatings (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Nitride (1)
- Non-desired foaming (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Nondestructive testing (1)
- Normung (1)
- Notch (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Online quality control (1)
- Online teaching (1)
- Ontologies (1)
- Ooxidation (1)
- Optic (1)
- Optical and Magnetic Materials (1)
- Optical backscatter reflectometry (1)
- Optical centrifugation (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Optical fibre (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orientation-dependent microstructure (1)
- Oriented surface crystallization (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxide scale (1)
- Oxides (1)
- Oxidglas (1)
- Oxygen evolution reaction (1)
- P92 steels (1)
- PA6.6 (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PPA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Parametric modeling (1)
- Particle Size Distribution (1)
- Passive components and circuits (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photocatalysis (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Physical properties (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Phytolith (1)
- Pipelines (1)
- Pitting corrosion (1)
- Planetary surface (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Platinum-group-metals (1)
- Pole figures (1)
- Polyethylen (1)
- Polymer Matrix Composite (1)
- Polymer Matrix Composites (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Pore (1)
- Porosification (1)
- Porous materials (1)
- Portfolio (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder bed density (1)
- Powder deposition (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Power factor (1)
- Power law (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- Process (1)
- Process Monitoring (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Proficiency test (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Property simulation (1)
- Pseudosymmetry (1)
- Pull-out composite materials (1)
- Pultruded fiber rods (1)
- Quality assurance (1)
- Quantitative Precipitation Analysis (1)
- Radii distribution (1)
- Radon transform (1)
- Rafting (1)
- Reaction Sintering (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference Material (1)
- Reference material BCR-425 (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Refractory alloy (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Relaxation metallic glasses (1)
- Relaxation tests (1)
- Relaxationsphänomene (1)
- Reliable characterization (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Research Data Management (1)
- Residual strains (1)
- Residual stress analysis (1)
- Resistance (1)
- Resistance spot welding (1)
- Resistance stress (1)
- Resonance testing (1)
- Rheology (1)
- Rhodonia placenta (1)
- Rissausbreitung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Robotische Glasschmelzanlage (1)
- SDC (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SHM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Sailplane Development Panel (1)
- Sall-angle scattering (1)
- Salt melt (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich structures (1)
- Scaffold (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scarf joint (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- Scavenging effect of iron (1)
- SchwarzP cells (1)
- Scratches (1)
- Screen printing (1)
- Screening method (1)
- Segregation (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Sensor (1)
- Sewage treatment plant (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silicon release (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Single crystal Ni-Base superalloys (1)
- Single crystal superalloys (1)
- Single fiber pull-out test (1)
- Sinter additive (1)
- Sinter retardation (1)
- Sintering additive (1)
- Sintering atmosphere (1)
- Sintern (1)
- Sinus floor augmentation (1)
- Size (1)
- Size and size distribution (1)
- Size distribution (1)
- Size effect (1)
- Sliding simulation (1)
- Slip localization (1)
- Slip-rolling (1)
- Slurry optimization (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle Scattering (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Softening temperature (1)
- Soil (1)
- Soil sample (1)
- Solar panels (1)
- Solid solution strengthening (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solidification (1)
- Space exploration (1)
- Spar cap design (1)
- Spark plasma sintering (1)
- Specimen geometry (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Split-vacancy defect complexes (1)
- Spring constant (1)
- Stable crack growth (1)
- Standardisation (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strain rate dependence (1)
- Strength (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural health monitoring (SHM) (1)
- Structural steel (1)
- Structure (1)
- Structured Data (1)
- Structured heating (1)
- Subcritical crack growth (1)
- Subsurface defects (1)
- Superalloy single crystals (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superelasticity (1)
- Superlegierung (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface Nucleation (1)
- Surface elasticity (1)
- Surface modification (1)
- Surface nucleation (1)
- Surface roughness (1)
- Surface stress (1)
- Surface-induced Melting (1)
- Swept wavelength interferometry (1)
- Swept wavelength interferometry (SWI) (1)
- Symmetric dwell periods (1)
- Synchrotron CT (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiation (1)
- Synchrotron radiations (1)
- Synchrotron tomography (1)
- Synthesis (1)
- T1 precipitate (1)
- TAHYA (1)
- TED (1)
- TIG-welding (1)
- TMF (1)
- TMF experiments (1)
- Technical Ceramics (1)
- Temperature dependence (1)
- Temperature driven process (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Termites (1)
- Test Improvement (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Texturation (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal degradation (1)
- Thermal desorption mass spectrometry (1)
- Thermal stress (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical loading (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-optical measurement (1)
- Thermoanalysis (1)
- Thermoanalytical Methods (1)
- Thermobimetal (1)
- Thermodynamic analysis (1)
- Thermodynamic stability (1)
- Thermodynamische Stabilität (1)
- Thermoelectric generator (1)
- Thermoelectric generator design (1)
- Thermogravimetric analysis (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Ermüdung (1)
- Thermoplastic (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thesaurus (1)
- Thickening (1)
- Thin films (1)
- Thin tribofilm (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Tomography (1)
- Tools (1)
- Tooth wear (1)
- Toughness (1)
- Transducers (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Two-photon-polymerization (1)
- Ultrasonic assited machining (1)
- Unidirectional composites (1)
- VCSEL (1)
- VM12 SHC (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Very high cycle fatigue (1)
- Vickers Hardness (1)
- Viscoelastic model (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume Fraction (1)
- Volume changes (1)
- Volume fraction (1)
- WAXS (1)
- Wasser (1)
- Waste water (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Water-based (1)
- Weibull distribution (1)
- Welding processing influences (1)
- Wet chemical etching (1)
- Wet dispersion (1)
- Wind turbine blade shell structures (1)
- Withstand voltage tests (1)
- Work of adhesion (1)
- Workshop (1)
- X-ray Diffraction (1)
- X-ray computed tomography (CT) (1)
- X-ray diffraction analysis (1)
- X-ray imaging (1)
- X-ray refractography (1)
- X-ray scattering (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- ZnO (1)
- alumina (1)
- arbidic austempered ductile iron (1)
- arbon capture (1)
- battery aging mechanism (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- condensate (1)
- current collector corrosion (1)
- dental (1)
- depth profiles (1)
- electrochemical characterization (1)
- electron microscopy (1)
- high entropy alloys (1)
- high pressure (1)
- hydrogen storage (1)
- impurities (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- laser cladding (1)
- microstructural changes (1)
- microstructure analysis (1)
- multi scale testing (1)
- negative crystal growth (1)
- oxidation (1)
- phosphate glasses (1)
- pitting corrosion (1)
- scanning electron microscopy (1)
- selective laser melting (1)
- sulfidation (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
- water speciation (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (909) (entfernen)
Paper des Monats
- ja (11)
Following the new paradigm of materials development, design, and optimization, digitalization is the main goal in materials sciences and engineering (MSE) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web technologies (SWT) are used since they allow for machine-actionable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD) aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific support in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are semantically represented on a prototypical basis which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this poster presentation illustrates demonstrators developed and deployed within the PMD project. Semantically anchored using the mid-level PMD Core Ontology (PMDco), they address data transformation leading to a novel data management which is based on semantic integrated data. The PMD data acquisition pipeline (DAP), which is fueled by traditional, diverse data formats, and a pipeline applying an electronic laboratory notebook (ELN) as data source are displayed. Additionally, the efficient combination of diverse datasets originating from different sources is demonstrated by the representation of a use case dealing with the well-known Orowan relation.
Electron Back Scatter Diffraction (EBSD) is a very versatile analytical technique allowing for the characterization of material structure. Historically, diffraction images (Kikuchi patterns) registered during EBSD analysis were solved using Hough/Radon transformation. The last decade brought several novel techniques of experimental pattern analysis, focusing entirely on image analysis routines such as pattern matching, or various variants of High-Resolution EBSD. However, all the above-mentioned techniques require prior knowledge of the material structure to perform orientation analysis. The recently presented algorithm employed in Crystallographic Analysis of Lattice Metric (CALM) software, effectively removes this limitation enabling a standard-less analytical approach in EBSD systems. At its core, the CALM technique couples accurate detection of the Kikuchi bands position, with a rigid construction of reciprocal lattice resulting from translational crystal symmetry. A unique characteristic of the methodology also gives an opportunity for application in the analysis of continuous lattice changes, for example tetragonality mapping. During mapping, however, the geometry of the gnomonic projection (represented by the projection center) is continuously altered decreasing overall algorithm efficiency. The work presents an analysis of the projection center in terms of precision and accuracy.
High‐temperature KCl‐induced corrosion of high Cr and Ni alloys investigated by in‐situ diffraction
(2024)
High‐temperature KCl‐induced corrosion in laboratory air was observed in situ utilizing X‐ray diffraction. High Cr‐containing model alloys (Fe‐13Cr, Fe‐18Cr‐12Ni, and Fe‐25Cr‐20Ni) were coated with KCl and exposed to dry air at 560°C. KCl‐free alloys were studied in the equivalent atmosphere as a reference. After exposure to KCl‐free environments, all alloys showed the formation of very thin oxide layers, indicating good corrosion resistance. In contrast, KCl‐bearing alloys showed distinct damage after exposure.
The characterization of really unknown phases typically uses 70 to 150 reflectors for lattice metric calculation. The determination of the lattice parameters follows with 4% accuracy. Including a Z correction up to 1% can be reached. The precision of the lattice parameters ratios (a:b:c) is, however, better than 0.1%.
Motivated by the aim of developing an additive manufacturing (AM) technology easily integrated in the process chains of the ceramic industry, the LSD-print technology was conceived as a slurry-based variation of binder jetting (BJ).
BJ and other powder bed technologies (such as powder bed fusion) are amongst the most successful AM techniques, especially for metals and polymers, thanks to their high productivity and scalability. The possibility to use commercially available feedstocks (in the form of powders or granules) makes BJ also attractive for ceramic materials. The application of these techniques to most advanced ceramics has however been difficult so far, because of the limitations in depositing homogeneous layers with fine, typically poorly flowable powders.
In this context, the "layerwise slurry deposition" (LSD) was proposed at TU Clausthal (Germany) as a slurry-based deposition of ceramic layers by means of a doctor blade. Combined with layer-by-layer laser sintering of the material, the LSD process was originally demonstrated for the rapid prototyping of silicate ceramics. Due to the difficulties in controlling the microstructure and the defect formation in laser-sintered technical ceramics, the LSD process was later combined with inkjet printing in the LSD-print technology, which has been further developed at BAM (Germany) in the past decade.
The LSD-print technology combines the high speed of inkjet printing, typical of BJ, with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. Due to the mechanical stability of the powder bed, the process can also be carried out with continuous layer deposition on a rotating platform, which further increases its productivity.
This presentation will delve into 10 years of research on the LSD-print of a wide variety of technical ceramics including alumina, silicon carbides and dental ceramics. The discussion highlights how a seemingly small process and feedstock modification (from powders to slurries) has great influence on the challenges and potential of this process, which are being addressed on its path to industrialization.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method enabling the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder. Not only very fine, submicron powders can be processed with low organics, but also the dense powder bed provides excellent support to the parts built. The LSD technology can be combined with binder jetting to develop the so-called “LSD-print” process. LSD-print combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to traditional processing.
The latest development of this technology shows that it is possible to print ceramic parts in a continuous process by depositing a layer onto a rotating platform, growing a powder bed following a spiral motion. The unique mechanical stability of the layers in LSD-print allows to grow a powder bed several centimeters thick without any lateral support. The continuous layer deposition allows to achieve a productivity more than 10X higher compared to the linear deposition, approaching a build volume of 1 liter/hour.
Fully automated and decentralized fused filament fabrication of ceramics for remote applications
(2024)
Manufacturing of ceramic components in remote (i.e., geographically isolated) settings poses significant challenges where access to conventional manufacturing facilities is limited or non-existent. Fused Filament Fabrication (FFF) enables the rapid manufacturing of ceramic components with complex geometries. Parts formed by FFF require subsequent debinding and sintering to reach full density. Debinding and sintering are typically executed in separate steps with different equipment, necessitating extensive human handling which hinders process automation and may be challenging for the operator in isolated environments. This poster presents an innovative approach: the integration of all process steps into a single, fully automated system, streamlining the process and minimizing human involvement. Our system combines a dual extrusion filament printer with a porous and heat-resistant ceramic print bed. The porous print bed enables mechanical interlocking of the first printed layers, ensuring adhesion and structural integrity during FFF. Ceramic parts are printed onto thin sacrificial rafts, which are built using an interface material with the same binder as the ceramic filament. After the print is completed, the heat-resistant print bed with all parts is transferred seamlessly with a carrier system into a high-temperature furnace for debinding and sintering. During sintering the sacrificial raft is disintegrated, allowing for unconstrained sintering of the ceramic parts and easy removal of the finished parts. In conclusion, our integrated approach enables significant advancements in the fabrication of complex ceramic components in remote environments with increased efficiency and minimal human handling.
The Laser-Induced Slip Casting is an additive manufacturing technology specifically developed for ceramic materials using water-based ceramic slurries. The process takes place layer-by-layer in a similar fashion as top-down vat photopolymerization, selectively consolidating each layer by means of a laser energy source positioned on the top. Contrary to vat photopolymerization, in which the consolidation is achieved by selectively cross-linking a ceramic-filled resin, LIS uses water-based slurries with a low amount of organic additives (typically < 5 wt%) as feedstocks.
In LIS, a green body is formed by local evaporation of water which causes the suspension to collapse forming a cast, following a mechanism similar to slip casting. Only a small content of organic additives is needed to effectively disperse the ceramic particles and to increase the green strength.
The technology is very versatile and can be applied to all ceramic systems that can be dispersed in water. One of the main advantages is that even dark materials such as silicon carbide can be processed without issues related to light scattering and absorption.
The presentation will discuss strengths and limitations of LIS compared to other AM technologies and will highlight the latest results for alumina and for silicon carbide ceramics.
The presentation will start with an overview of ceramic additive manufacturing (AM) technologies and will discuss the potential of AM in the field of bioceramics.
The presentation will then focus on two possible use cases of binder jetting technologies.
In the first example, standard powder-based binder jetting is used to manufacture a porous implant design for large scale bone defects. The related challenges in the process chain will be discussed, from powder synthesis to sintering and characterization of the printed part.
In the second example, the LSD-print slurry-based binder jetting technology is presented as a possibility to adapt powder-bed AM to produce dense ceramic parts. The use case will focus on an application in the field of dental ceramics, specifically for the manufacturing of patient individualized single tooth restorations (veneers, crowns) with a high throughput process chain.
Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
Additive manufacturing of metals – and in particular building with laser-based powder bed fusion – is highly flexible and allows high-resolution features and feedstock savings. Meanwhile, though space stations in low Earth orbit are established, a set of visits to the Moon have been performed, and humankind can send out rovers to explore Venus and Mars, none of these milestone missions is equipped with technology to manufacture functional metallic parts or tools in space. In order to advance space exploration to long-term missions beyond low Earth orbit, it will be crucial to develop and employ technology for in-space manufacturing (ISM) and in-situ resource utilisation (ISRU). To use the advantages of laser-based powder bed fusion in these endeavours, the challenge of powder handling in microgravity must be met. Here we present a device capable of building parts using metallic powders in microgravity. This was proven on several sounding rocket flights, on which occasions Zr-based metallic glass parts produced by additive manufacturing in space were built. The findings of this work demonstrate that building parts using powder feedstock, which is more compact to transport into space than wire, is possible in microgravity environments. This thus significantly advances ISRU and ISM and paves the way for future tests in prolonged microgravity settings.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as “electron beam-induced fragmentation” or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field B = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. B = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as ‘‘electron beam-induced fragmentation’’ or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field 𝐵 = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. 𝐵 = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
Today’s industrial demands challenge the research and development sector to make advances in the design and properties of materials that can withstand harsh environments. The AlMo0.5NbTa0.5TiZr refractory high-entropy superalloy (RSA), with a remarkable morphological similarity to the γ/γ' microstructure of Ni-based superalloys and promising high-temperature compressive properties, has been considered as a candidate for structural applications. However, additional properties need to be investigated in order to assess the suitability of this alloy for high temperature applications. Therefore, this work investigates the thermodynamic and microstructural stabilities of the RSA at room temperature and between 900 and 1100 °C, and their influence on the mechanical properties. Although it is possible to improve the mechanical properties at 20 °C by tuning the cooling rate, long-term high temperature exposures lead to phase instabilities that negatively influence the creep behavior.
This research deals with the development of the Vickers hardness knowledge graph, mapping the example dataset in them, and exporting the data-mapped knowledge graph as a machine-readable Resource Description Framework (RDF). Modeling the knowledge graph according to the standardized test procedure and using the appropriate upper-level ontologies were taken into consideration to develop the highly standardized, incorporable, and industrial applicable models. Furthermore, the Ontopanel approach was utilized for mapping the real experimental data in the developed knowledge graphs and the resulting RDF files were successfully evaluated through the SPARQL queries.
This study aims to represent an approach for transferring the materials testing datasets to the digital schema that meets the prerequisites of the semantic web. As a use case, the tensile stress relaxation testing method was evaluated and the testing datasets for several copper alloys were prepared. The tensile stress relaxation testing ontology (TSRTO) was modeled following the test standard requirements and by utilizing the appropriate upper-level ontologies. Eventually, mapping the testing datasets into the knowledge graph and converting the data-mapped graphs to the machine-readable Resource Description Framework (RDF) schema led to the preparation of the digital version of testing data which can be efficiently queried on the web.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
The heat-resistant cast iron EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S) was investigated for its fatigue crack growth behavior at room and high temperatures. Force-controlled tests were carried out at constant temperatures (20 °C, 500 °C, 700 °C) without and with hold time and different load ratios. The crack growth behavior was also characterized under TMF loading (Tmin = 400 °C, Tmax = 700 °C) by applying IP and OP conditions and different load ratios. Three different techniques were combined to monitor crack growth: potential drop, thermography, and compliance method. The effect of the different loading conditions on the fatigue crack growth behavior will be presented and discussed.
In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with laser light into the volume of a ceramic powder compound its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP) for the additive manufacture of filigree structures within the volume of ceramic slurries.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with light into the volume of a ceramic powder compound, its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP), and other volumetric methods for the additive manufacture of filigree structures within the volume of ceramic slurries.
In order to be able to manipulate ceramic powder compacts and ceramic suspensions (slurries) within their volume with light, a minimum transparency of the materials is required. Compared to polymers and metals, ceramic materials are characterized by the fact that they have a wide electronic band gap and therefore a wide optical window of transparency. The optical window generally ranges from less than 0.3 µm to 5 µm wavelength. In order to focus light into the volume of a ceramic powder compact, its light scattering properties must therefore be tailored. In this study, we present the physical background and material development strategies for the application of two-photon polymerization (2PP) and selective volumetric sintering for the additive manufacturing of structures in the volume of ceramic slips and green compacts.
The Binder Jetting BJ process is one of the most versatile additive manufacturing technologies in use. In this process a binder is locally jetted into a powder bed for the consolidation of a 3D structure, layer by layer. Basically, all materials which can be provided as a flowable powder and, thus, spreadable to a thin layer, can be processed. Metals, ceramics and polymers are processable, but also materials from nature, such as sand, wood sawdust and insect frass. Moreover, the BJ technology is adapted to large building volumes of some cubic meters easily. Besides these striking advantages, the manufacture of ceramic parts by BJ is still challenging, as the packing density of the powder bed is generally too low and the particle size of a flowable powder too large for a successful densification of printed parts in a subsequent sintering step to an advanced ceramic product. After an introduction of binder jetting in general and highlighting some examples, strategies for obtaining dense ceramic parts by BJ will be introduced.
Regarding feedstocks for the additive manufacturing (AM) of ceramics, two features are most critical in classical powder based AM processes: a high particle packing density (typically >50% TD) must be achieved with very fine particles (typically submicron) in order to ensure sufficient sintering activity. Three innovative approaches will be introduced to overcome this problem:
1. Layer wise slurry deposition: The use of water based ceramic slurries as feedstock for the additive manufacture of ceramics has many advantages which are not fully exploit yet. In the layerwise slurry deposition (LSD) process a slurry with no or low organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle on the previously deposited and dried material to form thin layers with a high packing density (55-60%). The LSD therefore shares aspects both of tape casting and slip casting. The LSD differentiates from the classical powder-based AM layer deposition, which typically achieves with a flowable coarse grained powder a low packing density (35-50%) only, consequently hindering the ability of sintering ceramic parts to full density. The LSD is coupled with the principles of selective laser sintering (SLS) or binder jetting, to generate novel processes which take advantage of the possibility of achieving a highly dense powder-bed.
2. Laser induced slip casting: Contrary to the LSD process, which requires drying of each individual layer, the direct interaction of ceramic slurries with intense laser radiation, for the laser induced slip casting (LIS), is a promising approach for the additive manufacture of voluminous parts.
3. Gas flow assisted powder deposition: By the application of a vacuum pump a gas flow is realized throughout the powder bed. This gas flow stabilizes the powder bed and results into an enhanced flowability and packing density of the powder during layer deposition.
The presentation will provide a detailed discussion of potentialities and issues connected to the mentioned technologies and will describe the most recent developments in their application to technical ceramics.
Gas turbine components, made of nickel-based alloys, undergo material damage due to high temperatures and mechanical stresses. These components need periodic replacement to avoid efficiency loss and failure. Repair of these parts is more cost-effective than replacement. State-of-the-art repair technologies, including different additive manufacturing (AM) and brazing processes, are considered for efficient restoration. Materials properties mismatches and/or internal defects in repaired parts may expedite crack initiation and propagation, reducing fatigue life. To understand the crack growth behavior in joining zones and predict the remaining life of repaired components, fatigue crack growth (FCG) tests were conducted on specimens of nickel-based alloys joined via brazing, pre-sintered preforms and AM. The FCG experimental technique was successfully adapted for joined specimens and results indicate that the investigated braze material provides a lower resistance to crack growth. In AM-sandwich specimens, the crack growth rates are significantly reduced at the interface of AM and cast material.
Unlike conventional alloys, which typically consist of one main element, high-entropy alloys (HEAs) contain five or more principal elements, which broaden chemical complexity and with it a realm of synergistic mechanisms. The AlMo0.5NbTa0.5TiZr HEA initiated a subclass of Al-containing refractory (r)HEAs that has recently drawn attention [2]. The alloy has a superalloy-resembling B2/bcc nanostructure, which inspired its name refractory high entropy superalloy (RSA). With high-temperature (HT) compressive strengths beyond conventional Ni-based superalloys, this nanostructure could be used for improved HT structural applications. However, in the application-relevant HT regime the Al-Zr-rich B2 phase decomposes to form a hexagonal Al-Zr-based intermetallic (Al4-xZr5; x: 0..1) [3,4]. This work explores the fascinating yet fatal micromechanisms associated to this phase transformation, in the context of creep, annealing and oxidation experiments performed between 800 and 1200 °C.
The material was produced by arc-melting and heat treatment in argon, which lead to grain boundaries decorated with up to 7%. Interrupted constant-load creep tests were performed under vacuum (at 10-4 Pa), at 900–1100 °C with external tensile stresses of 30–120 MPa. Oxidation experiments were separately conducted for 24 hours at 800 and 1000 °C in both dry (21% O2 + 79% N2) and humid (8% O2 + 74% N2 + 18% H2O) air. After the experiments, the samples were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy to reveal degradation mechanisms. Crystallographic texture, orientation relationships and stabilization of an oxygen-containing iso structure (Al4-xZr5(Ox-y); y: 0..x) of the Al-Zr-rich intermetallic are found and discussed.
This is the stable version of the full-notch creep test ontology (OntoFNCT) that ontologically represents the full-notch creep test. OntoFNCT has been developed in accordance with the corresponding test standard ISO 16770:2019-09 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).
The OntoFNCT provides conceptualizations that are supposed to be valid for the description of full-notch creep tests and associated data in accordance with the corresponding test standard. By using OntoFNCT for storing full-notch creep test data, all data will be well structured and based on a common vocabulary agreed on by an expert group (generation of FAIR data) which is meant to lead to enhanced data interoperability. This comprises several data categories such as primary data, secondary data and metadata. Data will be human and machine readable. The usage of OntoFNCT facilitates data retrieval and downstream usage. Due to a close connection to the mid-level PMD core ontology (PMDco), the interoperability of full-notch creep test data is enhanced and querying in combination with other aspects and data within the broad field of materials science and engineering (MSE) is facilitated.
The class structure of OntoFNCT forms a comprehensible and semantic layer for unified storage of data generated in a full-notch creep test including the possibility to record data from analysis and re-evaluation. Furthermore, extensive metadata allows to assess data quality and reliability. Following the open world assumption, object properties are deliberately low restrictive and sparse.
Processing and cytocompatibility of Cu-doped and undoped fluoride-containing bioactive glasses
(2024)
Sintered or additive-manufactured bioactive glass (BG) scaffolds are highly interesting for bone replacement applications. However, crystallization often limits the high-temperature processability of bioactive glasses (BGs). Thus, the BG composition must combine high bioactivity and processability. In this study, three BGs with nominal molar (%) compositions 54.6SiO2-1.7P2O3-22.1CaO-6.0Na2O-7.9K2O-7.7MgO (13–93), 44.8SiO2-2.5P2O3-36.5CaO-6.6Na2O-6.6K2O-3.0CaF2 (F3) and 44.8SiO2-2.5P2O3-35.5CaO-6.6Na2O-6.6K2O-3.0CaF2-1.0CuO (F3–Cu) were investigated. The dissolution and ion release kinetics were investigated on milled glass powder and crystallized particles (500–600 μm). All glasses showed the precipitation of hydroxyapatite (HAp) crystals after 7 days of immersion in simulated body fluid. No significant differences in ion release from glass and crystalline samples were detected. The influence of surface roughness on cytocompatibility and growth of preosteoblast cells (MC3T3-E1) was investigated on sintered and polished BG pellets. Results showed that sintered BG pellets were cytocompatible, and cells were seen to be well attached and spread on the surface after 5 days of incubation. The results showed an inverse relation of cell viability with the surface roughness of pellets, and cells were seen to attach and spread along the direction of scratches.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
This contribution presents the results of an experimental study on the LCF behavior of an austenitic 316L stainless steel produced by laser powder bed fusion featuring a low defect population, which allows for an improved understanding of the role of other typical aspects of a PBF‑LB microstructure. The LCF tests were performed between room temperature and 600 °C. A hot‑rolled 316L variant was tested as a reference. The mechanical response is characterized by strain-life curves, a Coffin‑Manson‑Basquin fitting, and cyclic deformation curves. The damage and deformation mechanisms are studied with X-ray computed tomography, optical and electron microscopy. The PBF‑LB/M/316L exhibits lower fatigue lives at lower strain amplitudes. The crack propagation is mainly transgranular. The solidification cellular structure seems to be the most relevant underlying microstructural feature determining the cyclic deformation behavior.
Several studies have been shown that the electron beam can be used to create nanomaterials from microparticle targets in situ in a transmission electron microscope (TEM). Here, we show how this method has to be modified in order to synthesize plasmonic gold nanoparticles (NPs) on insulating silicon oxide substrate by employing a scanning electron microscope with a comparatively low acceleration voltage of 30 kV. The synthesized NPs exhibit a random distribution around the initial microparticle target: Their average size reduces from 150 nm to 3 nm with growing distance to the initial Au microparticle target. Similarly, their average distance increases. The synthesized NP assemblies therefore show distinctly different plasmonic behaviour with growing distance to the target, which allows to study consequences of random hybridization of surface plasmon in disordered system, such as Anderson localization. To reveal the surface plasmons and their localization behaviour we apply electron energy loss spectroscopy in the TEM.
KupferDigital mechanical testing datasets: Stress relaxation and low-cycle fatigue (LCF) tests
(2024)
The KupferDigital project deals with the development of a data ecosystem for digital materials research on the basis of ontology-based digital representations of copper and copper alloys. This document provides exemplary mechanical testing datasets for training the developed KupferDigital infrastructures. Different types of cast copper alloys were provided for this research and their mechanical testing (stress relaxation and low-cycle fatigue) was performed in the accredited materials testing laboratory, while the test results were reported according to the DIN/ISO standards and attached with the maximum possible metadata about the sample history, equipment, and calibration. The attached content file consisted of the obtained primary raw testing data as well as the secondary datasets of these tests containing the detailed metadata of mechanical testing methods. Such test data files are processed by the KupferDigital digital tools to be converted to standardized machine-readable data files.
Thermoelectric generators are very attractive devices for waste heat energy harvesting as they transform a temperature difference into electrical power. However, commercially available generators show poor power density and limited operation temperatures. Research focuses on high‐temperature materials and innovative generator designs. Finding the optimal design for a given material system is challenging. Here, a theoretical framework is provided that allows appropriate generator design selection based on the particular material properties. For high‐temperature thermoelectric oxides, it can be clearly deduced that unileg multilayer generators have the highest potential for effective energy harvesting. Based on these considerations, prototype unileg multilayer generators from the currently best thermoelectric oxide Ca3Co4O9 are manufactured for the first time by industrially established ceramic multilayer technology. These generators exhibit a power density of 2.2 mW/cm² at a temperature difference of 260 K, matching simulated values and confirming the suitability of the technology. Further design improvements increase the power density by a factor of 22 to facilitate practicable power output at temperature differences as low as 7 K. This work demonstrates that reasonable energy harvesting at elevated temperatures is possible with oxide materials and appropriate multilayer design.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
Irradiation assisted stress corrosion cracking (IASCC) is a form of intergranular stress corrosion cracking that occurs in irradiated austenitic alloys. It requires an irradiated microstructure along with high temperature water and stress. The process is ubiquitous in that it occurs in a wide range of austenitic alloys and water chemistries, but only when the alloy is irradiated. Despite evidence of this degradation mode that dates back to the 1960s, the mechanism by which it occurs has remained elusive. Here, using high resolution electron backscattering detection to analyze local stress-strain states, high resolution transmission electron microscopy to identify grain boundary phases at crack tips, and decoupling the roles of stress and grain boundary oxidation, we are able to unfold the complexities of the phenomenon to reveal the mechanism by which IASCC occurs. The significance of the findings impacts the mechanical integrity of core components of both current and advanced nuclear reactor designs worldwide.
Following the new paradigm of materials development, design, and optimization, digitalization is the main goal in materials sciences and engineering (MSE) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web technologies (SWT) are used since they allow for machine-actionable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD, https://materialdigital.de) aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific support in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are semantically represented which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this presentation shows the efforts taken within the PMD project towards the digitalization in MSE such as the development of the mid-level PMD core ontology (PMDco, https://github.com/materialdigital/core-ontology). Furthermore, selected results of a PMD partner project use case addressing data and knowledge management from synthesis, production, and characterization of materials are shown.
In the past two decades, numerous relaxation or physical aging experiments of metallic glasses have revealed signatures of intermittent atomic-scale processes. Revealed via intensity cross-correlations from coherent scattering using X-ray photon correlation spectroscopy (XPCS), the observed abrupt changes in the time-domain of atomic motion does not fit the picture of gradual slowing down of relaxation times and their origin continues to remain unclear. Using a binary Lennard-Jones model glass subjected to microsecond-long isotherms, we show here that temporally and spatially heterogeneous atomic-cluster activity at different length-scales drive the emergence of highly non-monotonous intensity cross-correlations. The simulated XPCS experiments reveal a variety of time-dependent intensity-cross correlations that, depending on both the structural evolution and the 𝑞-space sampling, give detailed insights into the possible structural origins of intermittent aging measured with XPCS.
Highly unrelaxed structural states of metallic glasses have often advantageous mechanical properties. Since metallic glasses continuously relax with time (age) or inherently are well relaxed after processing, methods to uniformly rejuvenate the material are needed. One approach that has received attention is the so-called cryogenic-cycling method, during which a metallic glass is repeatedly immersed into liquid nitrogen. In some cases, cryogenic cycling is truly efficient in increasing the stored excess enthalpy of metallic glasses, but it does not seem to be universally applicable to all alloys and structural states. The origins for these differences remain unclear due to our limited understanding of the underlying structural evolution. In order to shed more light onto the fundamental structural processes of cryogenic cycling, we pursue in-situ x-ray photon correlation spectroscopy (XPCS) to trace the atomic-scale structural dynamics of a Zr-based metallic glass in two different structural states (ribbon and bulk metallic glass). This method allows calculating the relaxation times as a function of time throughout the thermal cycling. It is found that the investigated glasses exhibit heterogeneous structural dynamics at 300 K, which changes to monotonic aging at 78 K. Cryogenic cycling homogenizes the relaxation time distribution for both structural states. This effect is much more pronounced in the ribbon, which is the only structural state that rejuvenates upon cycling. We furthermore reveal how fast atomic-scale dynamics is correlated with long-time average structural relaxation times irrespective of the state, and that the ribbon exhibits unexpected additional fast atomic-scale relaxation in comparison to the plate material. Overall, a picture emerges that points towards heterogeneities in fictive temperature as a requirement for cryogenic energy storage.
Additive manufacturing (AM) offers significantly greater freedom of design compared to conventional manufacturing processes since the final parts are built layer by layer. This enables metal AM, also known as metal 3D printing, to be utilized for improving efficiency and functionality, for the production of parts with very complex geometries, and rapid prototyping. However, despite many technological advancements made in recent years, several challenges hinder the mass adoption of metal AM. One of these challenges is mechanical anisotropy which describes the dependency of material properties on the material orientation. Therefore, in this work, stainless steel 316L parts produced by laser-based powder bed fusion are used to isolate and understand the root cause of anisotropy in AM parts. Furthermore, an efficient and accurate multiscale numerical framework is presented for predicting the deformation behavior of actual AM parts on the macroscale undergoing large plastic deformations. Finally, a novel constitutive model for the plastic spin is formulated to capture the influence of the microstructure evolution on the material behavior on the macroscale.
Using the method of directional solidification, single crystals of experimental nickel-based superalloys with negative, zero, and positive γ/γ' misfits are obtained. The γ' solvus, solidus, and liquidus temperatures of the alloys are determined, and the microstructures of the alloys after directional solidification, heat treatment, and creep tests are investigated. Creep tests are performed at temperatures of 800 and 1000°C. It is found that single crystals of the alloy with a negative γ/γ' misfit have the highest creep resistance and lifetime (the crystal lattice period of the γ' phase is smaller than that of the γ matrix).
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.
AbstractHigh-strength aluminum alloys used in aerospace and automotive applications obtain their strength through precipitation hardening. Achieving the desired mechanical properties requires precise control over the nanometer-sized precipitates. However, the microstructure of these alloys changes over time due to aging, leading to a deterioration in strength. Typically, the size, number, and distribution of precipitates for a quantitative assessment of microstructural changes are determined by manual analysis, which is subjective and time-consuming. In our work, we introduce a progressive and automatable approach that enables a more efficient, objective, and reproducible analysis of precipitates. The method involves several sequential steps using an image repository containing dark-field transmission electron microscopy (DF-TEM) images depicting various aging states of an aluminum alloy. During the process, precipitation contours are generated and quantitatively evaluated, and the results are comprehensibly transferred into semantic data structures. The use and deployment of Jupyter Notebooks, along with the beneficial implementation of Semantic Web technologies, significantly enhances the reproducibility and comparability of the findings. This work serves as an exemplar of FAIR image and research data management.
A density-based phase field model is developed where the free energy functional is explicitly linked with molecular dynamics and is referred to as the Molecular Phase Field Method (MoPF). MoPF simulations involve expressing interatomic potentials in terms of density to form a density based free energy functional. Inputs to this functional are taken from atomistics such that the phase field density profile matches the corresponding density profile from atomistic simulations. We analyze our results by comparing the MoPF calculated excess interfacial energies with excess interfacial energies calculated using molecular dynamics associated with several nickel grain boundaries. Additionally, a comparison is made between our results and the interfacial energies of a \Sigma7 boundary across a variety of FCC systems simulated using density functional theory. The MoPF method is able to successfully predict grain boundary free energy trends between grain boundary and material types offering an atomistically informed mesoscale formulation for studying grain boundary physics.
PMD Core Ontology (PMDco)
(2023)
The PMD Core Ontology (PMDco) is a comprehensive framework for representing knowledge that encompasses fundamental concepts from the domains of materials science and engineering (MSE). The PMDco has been designed as a mid-level ontology to establish a connection between specific MSE application ontologies and the domain neutral concepts found in established top-level ontologies. The primary goal of the PMDco is to promote interoperability between diverse domains. PMDco's class structure is both understandable and extensible, making it an efficient tool for organizing MSE knowledge. It serves as a semantic intermediate layer that unifies MSE knowledge representations, enabling data and metadata to be systematically integrated on key terms within the MSE domain. With PMDco, it is possible to seamlessly trace data generation. The design of PMDco is based on the W3C Provenance Ontology (PROV-O), which provides a standard framework for capturing the generation, derivation, and attribution of resources. By building on this foundation, PMDco facilitates the integration of data from various sources and the creation of complex workflows. In summary, PMDco is a valuable tool for researchers and practitioners in the MSE domains. It provides a common language for representing and sharing knowledge, allowing for efficient collaboration and promoting interoperability between diverse domains. Its design allows for the systematic integration of data and metadata, enabling seamless traceability of data generation. Overall, PMDco is a crucial step towards a unified and comprehensive understanding of the MSE domain. PMDco at GitHub: https://github.com/materialdigital/core-ontology
This study investigates the sintering and crystallization behavior and kinetic of the bioactive glass (BG) 13–93 with nominal composition (in mol%): 54.6 SiO2 - 1.7 P2O3 - 22.1 CaO - 6.0 Na2O - 7.9 K2O - 7.7 MgO. Sintering and crystallization were investigated non-isothermally for various particle size fractions smaller than 315 μm as well as for bulk samples. Densification was not hindered by the presence of crystalline phases across all particle size fractions. Afterwards, wollastonite was found as the dominant crystal phase at higher temperature which resorb primary surface precipitation-like quartz crystallites. The growth direction shifts into volume when the sample surface is nearly covered. The crystal growth rate of wollastonite was calculated from the crystalline surface layer thickness measured during heating. The findings of this study are relevant for the high temperature processing of BG 13–93.
Mean-field modeling and phase-field simulation of grain growth under directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> α tⁿ with an exponent n ~ 0.6–0.7. The exponent n exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n ≈ 0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.