5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (355)
- Posterpräsentation (99)
- Zeitschriftenartikel (57)
- Beitrag zu einem Tagungsband (55)
- Forschungsdatensatz (22)
- Buchkapitel (6)
- Dissertation (4)
- Sonstiges (3)
- Beitrag zu einem Sammelband (2)
- Corrigendum (1)
Sprache
- Englisch (605) (entfernen)
Referierte Publikation
- nein (605) (entfernen)
Schlagworte
- Additive Manufacturing (51)
- Corrosion (44)
- Additive manufacturing (39)
- Glass (27)
- Microstructure (27)
- Ontology (27)
- Creep (22)
- Fatigue (19)
- Transmission electron microscopy (17)
- Crack growth (16)
- CCS (14)
- Ceramics (14)
- EBSD (12)
- Sintering (12)
- Ceramic (11)
- Degradation (11)
- 316L (10)
- Coarsening (10)
- Alloy 2618A (9)
- CCUS (9)
- CO2 (9)
- FAIR (9)
- Nanoparticles (9)
- Steel (9)
- Aluminium (8)
- Crystal plasticity (8)
- Crystallization (8)
- Diffraction (8)
- Glass fiber reinforced polymers (8)
- High entropy alloys (8)
- Martensitic steel (8)
- Oxidation (8)
- Slurry (8)
- Ti-6Al-4V (8)
- Anisotropy (7)
- DCB (7)
- Digitalization (7)
- EN AW-2618A (7)
- Fractography (7)
- Machine Learning (7)
- Mechanical testing (7)
- Scanning electron microscopy (7)
- Thermoelectrics (7)
- Water speciation (7)
- Aluminium alloy (6)
- CALPHAD (6)
- Geothermal (6)
- High temperature corrosion (6)
- High-temperature corrosion (6)
- Nickel-base superalloys (6)
- Powder (6)
- Robotic melting (6)
- S-phase (6)
- Semantic Interoperability (6)
- Simulation (6)
- Soda-lime silicate glass (6)
- Supercritical/dense phase CO2 (6)
- Vickers (6)
- Wind turbine blades (6)
- 3D printing (5)
- Aging (5)
- CCU (5)
- CO2 quality (5)
- Carbon steel (5)
- Carbon steels (5)
- Data Interoperability (5)
- Droplet corrosion (5)
- Electron microscopy (5)
- Fe-Al alloys (5)
- Heat treatment (5)
- Hydrogen (5)
- Impurities (5)
- In situ (5)
- Intermetallics (5)
- Iron aluminides (5)
- Knowledge graph and ontologies (5)
- LCF (5)
- Layerwise slurry deposition (5)
- Low Cycle Fatigue (5)
- Neutron diffraction (5)
- Non-destructive testing (5)
- PMD Core Ontology (5)
- Particle size (5)
- Plattform MaterialDigital (5)
- Polymer matrix composites (5)
- Residual Stress (5)
- Residual stress (5)
- Semantic Web Technologies (5)
- Sulfidation (5)
- Superaustenite steel (5)
- Thermomechanical fatigue (5)
- VSSA (5)
- Water content (5)
- X-ray diffraction (5)
- AGIL (4)
- AISI 316L (4)
- Additive Fertigung (4)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Alumina (4)
- Carbon capture (4)
- Composite (4)
- Computed Tomography (4)
- Creep behavior (4)
- Environmental stress cracking (4)
- FAIR data management (4)
- Fatigue crack growth (4)
- Foaming (4)
- Glas (4)
- High Cycle Fatigue (4)
- High alloyed steel (4)
- High entropy alloy (4)
- High temperature (4)
- In-space manufacturing (4)
- Inconel 686 (4)
- Knowledge Representation (4)
- LTCC (4)
- Laser Powder Bed Fusion (4)
- Laser powder bed fusion (4)
- Mechanical properties (4)
- Microgravity (4)
- NTE (4)
- PE-HD (4)
- Pipeline (4)
- Pipeline network (4)
- Polyaniline (4)
- Reference data (4)
- Sandwich (4)
- Scale-bridging (4)
- Scarf repairs (4)
- Selective laser melting (4)
- Shear modulus (4)
- Spectroscopy (4)
- TEM (4)
- Tensile test (4)
- Virtual experiments (4)
- Viscosity (4)
- Workflow (4)
- Young's modulus (4)
- Ab-initio (3)
- Advanced ceramics (3)
- Aluminium Alloy (3)
- Binder Jetting (3)
- Carbon capture storage (3)
- Carbon dioxide (3)
- Ceramic spring (3)
- Coating (3)
- Composites (3)
- Concrete (3)
- Corrosion Fatigue (3)
- Crack Propagation (3)
- Crack tip opening displacement (3)
- Creep data (3)
- Damage (3)
- Dark-field transmission electron microscopy (3)
- Dark-field transmission electron microscopy (DFTEM) (3)
- Data Space (3)
- Dielectric strength (3)
- Digtial Representation (3)
- Diopside (3)
- Elastic modulus (3)
- Electron Backscatter Diffraction (3)
- Electronic Lab Notebook (3)
- FIB (3)
- Ferritic-martensitic steels (3)
- Fracture Toughness (3)
- Fracture surface (3)
- Full Notch Creep Test (3)
- Full-Notch Creep Test (FNCT) (3)
- GD-OES (3)
- Gold nanoparticles (3)
- High temperature mechanical properties (3)
- High-density polyethylene (3)
- High-entropy alloys (3)
- Iron oxide nanoparticles (3)
- Layerwise Slurry Deposition (3)
- Lightweight materials (3)
- Lithium Ion Batteries (3)
- Mechanical behavior (3)
- Metadata schema (3)
- Microplastics (3)
- Microstructure Design (3)
- Modeling (3)
- Orientation (3)
- Oxide Glasses (3)
- P92 (3)
- PMD (3)
- Pitting (3)
- Polymer (3)
- Recommendations (3)
- Referenzdaten (3)
- Research Data Management (3)
- Rotor blade (3)
- Roughness (3)
- SEM (3)
- Scintillators (3)
- Semantic Data (3)
- SiO2 (3)
- Silicate Glasses (3)
- Sol-gel (3)
- Solid-state (3)
- Surface energy (3)
- Syngle Crystal alloy (3)
- TDEP (3)
- Temperature (3)
- Tempered Martensite Ferritic Steels (3)
- Tensile Test (3)
- Tensile Test Ontology (3)
- Tensile data (3)
- Texture (3)
- Thermo-Mechanical Fatigue (3)
- Thermomechanics (3)
- Transmission electron microscopy (TEM) (3)
- Ultrasound (3)
- Utilization (3)
- Welding (3)
- Whole-chain CCS scenario (3)
- Wind turbine blade shells (3)
- μ-gravity (3)
- 3D-printing (2)
- AM (2)
- Adiabatic calorimeter (2)
- Agglomerates (2)
- Aggressive environment (2)
- Air-coupled ultrasonic testing (2)
- Airborne ultrasonic testing (2)
- Aluminum alloys (2)
- Analysis (2)
- Annealing (2)
- Aquifer (2)
- Automation (2)
- Biodiesel (2)
- Biofilm (2)
- Bond energy (2)
- Brinell hardness (2)
- CO2-storage (2)
- Calcium cobaltite (2)
- Capture (2)
- Carbon (2)
- Carbon Fiber Reinforced Plastics (2)
- Carbon storage (2)
- Casting (2)
- CeO2 (2)
- Cement (2)
- Ceria (2)
- Characterization (2)
- Chemically complex alloy (2)
- Chromium oxide (2)
- Coatings (2)
- Compositionally complex alloys (2)
- Condensation (2)
- Copper (2)
- Copper alloys (2)
- Corrosion fatigue (2)
- Crack evolution (2)
- Crack propagation (2)
- Crack propagation analysis (2)
- Creep-Fatigue (2)
- Creep-fatigue (2)
- Crevice corrosion (2)
- Cross linking (2)
- Crystal orientation (2)
- Cure process (2)
- Data Management (2)
- Data Structures (2)
- Data management (2)
- Data mapping (2)
- Dataset (2)
- Depth-profiling (2)
- Destabilization (2)
- Deuterium (2)
- Dielectric breakdown (2)
- Diesel (2)
- Diffraction Elastic Constants (2)
- Diffraction Enhanced Imaging (2)
- Diffusion (2)
- Diffusion coefficient (2)
- Digital image correlation (2)
- Digital material representation (2)
- Digitization (2)
- Dislocation (2)
- Dispersion process (2)
- Distribution function (2)
- Dynamic mechanical analysis (DMA) (2)
- EDX (2)
- EDXRD (2)
- Electron beam induced modification (2)
- Electron-beam-induced modification (2)
- Environmental Stress Cracking (2)
- Environmental stress cracking (ESC) (2)
- FAIR data (2)
- Fatigue of sandwich shell structures (2)
- FeCr- alloys (2)
- Ferroelectret (2)
- Fiber reinforced polymer (2)
- Fluoride phosphate glasses (2)
- Fracture Surface Analysis (2)
- Fracture surface analysis (2)
- Gender gap (2)
- Gitterkonstanten (2)
- Glass Digital (2)
- Glass composition (2)
- Glass powder (2)
- Glass-ceramics (2)
- Grain boundary engineering (2)
- HEA (2)
- Hard machining (2)
- Hardness (2)
- High Alloyed Steel (2)
- High Entropy Alloy (2)
- High Temperature Corrosion (2)
- High Temperature Testing (2)
- High-entropy alloy (2)
- Hydrogen permeation (2)
- IN718 (2)
- IR (2)
- ISRU (2)
- Imaging techniques (2)
- In situ tensile test (2)
- In-situ (2)
- Infrastructure (2)
- Injection (2)
- Internal friction (2)
- Interoperability (2)
- Inverted classroom (2)
- Joined nickel-based alloys (2)
- Kikuchi (2)
- LSD-print (2)
- Laminography (2)
- Laser (2)
- Laser Powder Bed fusion (2)
- Laser ablation in liquid (2)
- Laser beam melting (2)
- Laser cladding (2)
- Lattice misfit (2)
- Lattice parameters (2)
- Layerwise (2)
- Lead borate glasses (2)
- Long-term behavior (2)
- Low cycle fatigue (2)
- Lunar habitat (2)
- Lunar regolith simulant (2)
- MEA (2)
- Manganese oxide (2)
- Material digital (2)
- Metal seal (2)
- Micromechanical model (2)
- Microstrucrue Design (2)
- Microstructural analysis (2)
- Microstructural characterization (2)
- Microstructure analysis (2)
- Microstructure evolution (2)
- Microstructure-property-correlation (2)
- Mikrostruktur (2)
- Mixed gas atmosphere (2)
- Monte-Carlo Simulation (2)
- Multifunctional nanoparticles (2)
- Multilayer (2)
- Multilayer technology (2)
- NDT (2)
- NFDI (2)
- Nano powder (2)
- Nano-powder (2)
- Notches (2)
- Ontologie (2)
- Ontology development (2)
- Oriented surface crystallization (2)
- Oxidation behavior (2)
- PBF-LB/M/316L (2)
- PMDco (2)
- Paving (2)
- Phase change material (2)
- Phasenidentifikation (2)
- Photon counting detector (2)
- Plattform Material Digital (2)
- Polyethylene, PE-HD (2)
- Porosity (2)
- Precipitation (2)
- Process monitoring (2)
- Protective coating (2)
- Push-out Test (2)
- Ratio refinement (2)
- Reaction sintering (2)
- Reference material (2)
- Residual Stresses (2)
- Residual stresses (2)
- Ressidual stress (2)
- Round Robin (2)
- S355 steel sheet (2)
- SAXS (2)
- SIMS (2)
- SLM (2)
- Salt eutectics (2)
- Sample preparation (2)
- Selective Laser Melting (2)
- Semantic Representation (2)
- Sibayak (2)
- Silicon Carbide (2)
- Silver diffusion (2)
- Silver nanoparticle (2)
- Silver-glass-metallization-paste (2)
- Sintering additives (2)
- Sol-gel coating (2)
- Solar sintering (2)
- Solubility (2)
- Spray drying (2)
- Spring constant (2)
- Standard (2)
- Standardization (2)
- Starch (2)
- Starch nanoparticle (2)
- Storage (2)
- Stress relaxation (2)
- Sulfiding (2)
- Superalloy (2)
- Supercritical CO2 (2)
- Surface (2)
- Surface Energy (2)
- Surface crystallization (2)
- Synchrotron Tomography (2)
- Synthetic air (2)
- TED-GC-MS (2)
- Tensile Properties (2)
- Tensile testing (2)
- Thermal Spray (2)
- Thermal energy storage (2)
- Thermoelectric (2)
- Thermogravimetry (2)
- Thermoset polymers (2)
- Titanium (2)
- Titanium oxide (2)
- ToF-SIMS (2)
- Topography (2)
- Transparent ceramics (2)
- Two Photon Polymerization (2)
- UV-irradiation (2)
- Viscoplasticity (2)
- Wall thickness (2)
- Weibull Distribution (2)
- Wind energy (2)
- Wind turbine (2)
- Wood protection (2)
- X-Ray Diffraction (2)
- X-ray laminography (2)
- X-ray refraction (2)
- XANES (2)
- XRD (2)
- Zero-g (2)
- corrosion (2)
- µ-gravity (2)
- 150 Years (1)
- 2PP (1)
- 3D (1)
- 3D Reconstruction (1)
- 3D glass structure model (1)
- 3D imaging (1)
- 3D materialography (1)
- 5G (1)
- 9-12% Cr ferritic-martensitic steels (1)
- AFM (1)
- AISI 304L (1)
- ATZ (1)
- Accelerated integration scheme (1)
- Acid-leaching (1)
- Acids (1)
- Active thermography (1)
- Additive manufactured Ni-base superalloys (1)
- Adiabatic shear bands (1)
- Adolf Martens (1)
- Advanced manufacturing (1)
- Advanced wastewater treatment (1)
- Aerospace (1)
- Ageing (1)
- Aggressive environement (1)
- Aggressive gases (1)
- Aging mechanisms (1)
- Al-Cu-Li alloys (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Al2O3 (1)
- Alkali zinc borate glass (1)
- Alkali-activated materials (1)
- Alloy 2818A (1)
- Alpha-tricalcium phosphate (1)
- Alumina toughened zirconia (1)
- Aluminosilicate glasses (1)
- Aluminum (1)
- Aluminum alloy (1)
- Amorphous silica (1)
- Analytical services (1)
- Anhydrite (1)
- Artefact (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atmospheric plasma spraying (1)
- Atomic packing factor (1)
- Atomization (1)
- Austenitic cast iron (1)
- Austenitic stainless steel (1)
- Austenitic steel (1)
- Austenitic steel 316L (1)
- Austenitischer Stahl (1)
- Automated finite element analysis (1)
- Automatische Finite Element Simulation (1)
- BTS (1)
- Biaxial strength (1)
- Binder jetting (1)
- Bio Ceramics (1)
- Bio-ceramic engineering (1)
- Bioactive (1)
- Bioactive Glass (1)
- Bioactive glass (1)
- Bioceramic (1)
- Bioceramics (1)
- Bioresorbable (1)
- Blended learning (1)
- Blähen (1)
- Borate glasses (1)
- Breakdown strength (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- Brown-rot fungi (1)
- Burst test (1)
- CALPHAD databases analysis (1)
- CLS (1)
- CO2 Corrosion (1)
- CO2-corrosion (1)
- Cabon capture and storage (1)
- Calcination (1)
- Calcium manganate (1)
- Calcium sulfates (1)
- Calibration (1)
- Cantor alloy (1)
- Carbidic austempered ductile iron (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Carbon Fibers (1)
- Carbon capture and storage (1)
- Carbon fibre-reinforced-plastics (1)
- Catalogue of services (1)
- Ccs (1)
- CdTe quantum dots (1)
- Centrifugal casting (1)
- Ceramic multilayer (1)
- Ceramic nano particles (1)
- Ceramic springs (1)
- Ceramics 3D printing (1)
- Certification Standard 22 (1)
- Certified Referencematerial (1)
- Charpy test (1)
- Chemically Complex Alloy (1)
- Chemically complex alloys (1)
- Chemo-mechanical coupling (1)
- Chromatography (1)
- Chromia (1)
- Co-axial monitoring (1)
- Co-firing (1)
- Co-segregation (1)
- Co2-Storage (1)
- Complex borides (1)
- Complex concentrated alloy (CCA) (1)
- Complex loading (1)
- Component assessment (1)
- Composite materials (1)
- Composite pressure vessels (1)
- Composite structures (1)
- Composite testing (1)
- Computed tomography (1)
- Concrete 3D-printing (1)
- Coniophora puteana (1)
- Contamination (1)
- Continnum damage model (1)
- Cooling simulations (1)
- Corrosion and storage (CCUS) technology (1)
- Corrosion mechanism (1)
- Corrosion resistance (1)
- Coulomb explosion (1)
- Cow stress (1)
- Cr2O3 (1)
- CrCoNi (1)
- CrMnFeCoNi (1)
- Crack healing (1)
- Creep anisotropy (1)
- Creep behaviour (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Critical energy release rate (1)
- Crop protection formulations (1)
- Crystal Defects (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Crystal lattice (1)
- Cubical Iron Oxide (1)
- Cubical shape (1)
- Cycle jump (1)
- Cyclic R-Curve (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Cyclic softening (1)
- DED-L (1)
- DLS (1)
- Damage Behavior (1)
- Damage Tolerance (1)
- Damage evolution (1)
- Damage mechanisms (1)
- Data Exchange (1)
- Data Fusion (1)
- Data Integration (1)
- Data Mapping (1)
- Data analysis (1)
- Data format (1)
- Data fusion (1)
- Data linking (1)
- Data space (1)
- Data storage (1)
- Data structure (1)
- Deep learning (1)
- Defect detection (1)
- Defects (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation behavior (1)
- Demonstrators (1)
- Dense phase (1)
- Density (1)
- Density-based Model (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Density-based phase-field modelling (1)
- Dental (1)
- Dental ceramics (1)
- Dentine (1)
- Design of experiment (1)
- Die casting (1)
- Dielectric Spectroscopy (1)
- Dielectric breakdown strength (1)
- Dielectric characterization (1)
- Dielectric properties (1)
- Diffraction contrast (1)
- Diffusivity (1)
- Digital Transformation (1)
- Digital Twin (1)
- Digital representation (1)
- Dislocation substructure (1)
- Dislocations (1)
- Disordered assemblies (1)
- Dissimilar metal weld (1)
- Dissolved water (1)
- Distributed fiber optic sensors (1)
- Distributed fibre optic sensors (1)
- Diversity (1)
- Driving physical mechanism (1)
- Droplet (1)
- Dual-energy (1)
- Ductile iron (1)
- Dwell-Fatigue (1)
- Dynamic mechanical analysis (1)
- Dynamisch Mechanische Analyse (1)
- EAC-1A (1)
- EASA (1)
- EC4SafeNano (1)
- EIS (1)
- EN AW 2618A a (1)
- EPR (1)
- Early oxidation (1)
- Elastic constants (1)
- Elastic microstructure (1)
- Elasticity (1)
- Elctronic Lab Notebook (1)
- Electric field distribution (1)
- Electric field strength (1)
- Electrical insulation (1)
- Electrochemical deposition (1)
- Electrochemical dressing (1)
- Electromicroscopy (1)
- Electron Microscopy (1)
- Electron backscatter diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron energy (1)
- Electropolishing (1)
- Enamel (1)
- Endurance Limit (1)
- Energy distribution (1)
- Environmental Stress Cracking (ESC) (1)
- Environmentally assisted cracking (1)
- Epoxy (1)
- Etching (1)
- European Centre (1)
- FAIR Data (1)
- FAIR Data Management (1)
- FCH JU (1)
- FNCT (1)
- FT-IR (1)
- Fabrication method (1)
- Failure test (1)
- Fatigue Crack Growth (1)
- Fatigue Life Evaluation (1)
- Fatigue crack propagation (1)
- Fatigue damage (1)
- Fatigue fracture (1)
- Fatigue of sandwich structures (1)
- Fatigue performance (1)
- Feldspar (1)
- Fem (1)
- Female noble prize winners (1)
- Ferritic Alloys (1)
- Fiber (1)
- Fiber reinforced polymers (1)
- Film depositition (1)
- Fine Powder (1)
- Finite element analysis (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- First year students (1)
- Flipped classroom (1)
- Flow Coefficient (1)
- Flowability (1)
- Fluorescence spectroscopy (1)
- Fluoride nanoparticles (1)
- Fluorolytic sol−gel (1)
- Focussed ion beam growth (1)
- Force-distance diagram (1)
- Fourier transform infrared spectroscopy (1)
- Fracture (1)
- Fracture Mechanics (1)
- Fracture behavior (1)
- Fracture mechanics (1)
- Fracture surface energy (1)
- Fracture toughness (1)
- Fragility (1)
- Freeze Drying (1)
- Fresnoit (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Functional fatigue (1)
- Fungi (1)
- Fused Filament Fabrication (1)
- GFRP (1)
- Gas flow assisted powder deposition (1)
- Gas storage (1)
- Gasabgabe (1)
- Gasgehalt (1)
- Gd3+ (1)
- Gefüge (Werkstoffkunde) (1)
- General Chemistry (1)
- Geometrical factors (1)
- Geopolymers (1)
- Glass Fibres (1)
- Glass ceramic (1)
- Glass fiber reinforced polymer (1)
- Glass fibre reinforced plastics (1)
- Glass forming (1)
- Glass liner (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass scintillator (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramic (1)
- Glasses (1)
- Gold nanoparticle synthesis (1)
- Gradient-enhanced damage (1)
- Grain boundaries (1)
- Granules (1)
- Graphic design (1)
- Gypsum (1)
- HV-Insulation (1)
- Hardness test (1)
- Heat Treatment (1)
- Heat Treatments (1)
- Heißgasextraktion (1)
- High - temperature corrosion (1)
- High Entropy Alloys (1)
- High Voltage Insulation (1)
- High alloyed steels (1)
- High cycle fatigue (1)
- High energy radiation (1)
- High entropy superalloys (1)
- High-Temperature Corrosion (1)
- High-density polyethylene (PE-HD) (1)
- Hochentropie-Legierung (1)
- Hochentropielegierung (1)
- Honing (1)
- Honing Stone (1)
- Horizon 2020 (1)
- Host-guest hybrid materials (1)
- Hot Press (1)
- Hot isostatic pressing (1)
- Hot isostatic pressing (HIP) (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hybrid Manufacturing (1)
- Hydrogen permeability (1)
- Hydrogen sensor (1)
- Hydrogen sensors (1)
- Hydrogen storage tank (1)
- Hyper-arid (1)
- IN738LC (1)
- IR spectroscopy (1)
- Imaging (1)
- Implant failures (1)
- Implants (1)
- In situ synthesis (1)
- In-Situ Testing (1)
- In-situ tomography (1)
- In718 (1)
- Inconel 625 (1)
- Inconel 686 coating (1)
- Inconel 718 (1)
- Indentation hardness (1)
- Initial attachment (1)
- Interface (1)
- Interface Strength (1)
- Interfacial Spinodal (1)
- Interfacial shear strength (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Ionic porosity (1)
- Iron oxide (1)
- Irregular topography (1)
- Kikuchi diffraction (1)
- Kikuchi pattern (1)
- Knowledge Graph (1)
- Knowledge Graphs (1)
- Knowledge graph (1)
- Kriechen (1)
- Kristallisation (1)
- L-PBF (1)
- LMD (1)
- LTCC multilayer (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Scanning Microscopy (1)
- Laser Scanning Microscopy (LSM) (1)
- Laser curing (1)
- Laser induced slipcasting (1)
- Laser light scattering (1)
- Laser-induced slip casting (1)
- Lattices (1)
- Layer depostion (1)
- Lecture films (1)
- Lecture videos (1)
- Legierung mit komplexer Zusammensetzung (1)
- Li-ion battery (1)
- Life cycle (1)
- Lifetime prediction (1)
- Lightweighting (1)
- Limestone Filler (1)
- Lithium-ion batteries (1)
- Lithography-based technologies (1)
- Local landscape evolution (1)
- Localized plasmons (1)
- Long-term storage (1)
- Lorenz transmission electron microscopy (1)
- Low Cycle Fatigue (LCF) (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- MOUSE (1)
- Manufacturing (1)
- Martensitic steel (1)
- Mass transport (1)
- Mat-o-lab (1)
- Material Digital (1)
- Material Life Cycle (1)
- Material characterization (1)
- Material defects (1)
- Material degradation (1)
- Material oxidation (1)
- MaterialDigital (1)
- Materials Chemistry (1)
- Materials Data Space (1)
- Materials Modelling (1)
- Materials Science (1)
- Materials and Processes Data Reusability (1)
- Materials science (1)
- Materials testing (1)
- Mechanical Behavior (1)
- Mechanical Engineering (1)
- Mechanical and thermal testing (1)
- Mechanics of Materials (1)
- Mechanistic Modelling (1)
- Medium Entropy Alloys (1)
- Medium entopy alloy (1)
- Medium entropy alloy (1)
- Medium-entropy alloy (1)
- Mehrskalenmodell (1)
- Melt pool boundary (1)
- Metal powder characterization (1)
- Metallic components (1)
- Metallic glasses (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Metals and Alloys (1)
- Metformin (1)
- Metrology (1)
- Micro computed tomography (1)
- Micro-shrinkages (1)
- Microbiologically influenced corrosion (1)
- Microhardness (1)
- Micromanipulation (1)
- Microsegregation (1)
- Microstructural evolution (1)
- Microstructural orientation (1)
- Microstructure Characterization (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure modification (1)
- Mid-Level Ontology for MSE (1)
- Mikroplastik (1)
- Missing acknowledgment (1)
- Mixed Ca-K-Na phosphates (1)
- Mn3O4 (1)
- Molecular Dynamics (1)
- Molecular dynamics (1)
- Monte-Carlo-Analysis (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multilayertechnik (1)
- NFDI-MatWerk (1)
- NIST (1)
- NMR (1)
- Na and K rhenanites (1)
- Nano CRM (1)
- Nano metal fluorides (1)
- Nano particle (1)
- Nano screening (1)
- Nano-assemblies (1)
- Nano-ceramic-additive-manufacturing photoresin (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nano-safety (1)
- NanoCAM (1)
- Nanoindentation (1)
- Nanomaterial screening (1)
- Nanomaterials (1)
- Nanoparticle synthesis (1)
- Nanoplattform (1)
- Nanostructure (1)
- Nanostructure quantification (1)
- Negative charged microparticle (1)
- Net zero (1)
- Networking (1)
- Neutron Diffraction (1)
- New standards (1)
- Ni-Mn-Ga (1)
- Ni-Resist (1)
- Nickel based coatings (1)
- Nickel-base alloy (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Niobium alloying (1)
- Noble metal nanoparticles (1)
- Non-desired foaming (1)
- Nondestructive testing (1)
- Normung (1)
- Nucleation (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Online quality control (1)
- Online teaching (1)
- Ontologies (1)
- Ooxidation (1)
- Optic (1)
- Optical backscatter reflectometry (1)
- Optical criterion (1)
- Optical fibre (1)
- Optical properties (1)
- Optical properties of glasses and ceramics (1)
- Optical spectroscopy (1)
- Orientation-dependent microstructure (1)
- Oxide glass (1)
- Oxide scale (1)
- Oxides (1)
- Oxidglas (1)
- P92 steels (1)
- PA6.6 (1)
- PPA (1)
- Particle Size Distribution (1)
- Particle morphology (1)
- Particle-bed binder jetting (1)
- Pattern matching (1)
- Permeability (1)
- Persistent luminescence (1)
- Persistent luminescent (1)
- Phase Diagrams (1)
- Phase Separation (1)
- Phase analysis (1)
- Phase diagram (1)
- Phase field simulation (1)
- Phase separation (1)
- Phase transformation (1)
- Phase transformations (1)
- Phase-Field Simulation (1)
- Phase-Field Simulations (1)
- Phase-field (1)
- Phase-field Simulation (1)
- Phase-field simulation (1)
- Phosphors (1)
- Photocatalysis (1)
- Photodynamic therapy (1)
- Physical properties (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Phytolith (1)
- Pipelines (1)
- Planetary surface (1)
- Plasticity (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Pole figures (1)
- Polyethylen (1)
- Polyethylene (1)
- Polymer Matrix Composite (1)
- Polymer Matrix Composites (1)
- Polymer-Ceramic-Composite (1)
- Polymer-ceramic mixtures (1)
- Porcelain (1)
- Pores (1)
- Portfolio (1)
- Powder bed density (1)
- Powder deposition (1)
- Powder-based processes (1)
- Powdered activated carbon (1)
- Power plant (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Preparation (1)
- Pressure assisted sintering (1)
- Pressure-assisted sintering (1)
- Process (1)
- Process Monitoring (1)
- Proficiency test (1)
- Property simulation (1)
- Pull-out composite materials (1)
- Quality assurance (1)
- Quantitative Precipitation Analysis (1)
- Quantum dots (1)
- Radiation-matter interaction (1)
- Radii distribution (1)
- Rafting (1)
- Raman (1)
- Raman spectroscopy (1)
- Real time growth control (1)
- Recycling (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference Material (1)
- Reference material BCR-425 (1)
- Reference nanomaterials (1)
- Reference nanoparticles (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Refractory high entropy alloys (1)
- Relaxation (1)
- Relaxation metallic glasses (1)
- Relaxation tests (1)
- Relaxationsphänomene (1)
- Reliable characterization (1)
- Repair of sandwich shell structures (1)
- Repair patch (1)
- Reproducibility (1)
- Residual stress analysis (1)
- Resistance (1)
- Resistance stress (1)
- Reusability (1)
- Review (1)
- Rheology (1)
- Rhodonia placenta (1)
- Rissausbreitung (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Robotic glass melting (1)
- Robotische Glasschmelzanlage (1)
- SEM wood characterization (1)
- SHM (1)
- Safety assessment (1)
- Sailplane Development Panel (1)
- Sall-angle scattering (1)
- Salt melt (1)
- Sandwich structures (1)
- Scaffold (1)
- Scanning Electron Microscopy (SEM) (1)
- Scanning electron microscope (1)
- Scanning electron microscopy (SEM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint repair (1)
- Scarf joint repairs (1)
- SchwarzP cells (1)
- Screen printing (1)
- Screening method (1)
- Segregation Engineering (1)
- Self-healing (1)
- Semantic Interioerability (1)
- Semantic Web (1)
- Semantic Web technologies (1)
- Semantic web (1)
- Sensing (1)
- Sensor (1)
- Sewage treatment plant (1)
- Shape-memory alloys (1)
- Silicatglas (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver metallization paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Simulation of concrete (1)
- Single crystal (1)
- Single crystal superalloys (1)
- Single-Crystal (1)
- Single-crystals (1)
- Sinter additive (1)
- Sinter retardation (1)
- Sintering atmosphere (1)
- Sintern (1)
- Size (1)
- Size and size distribution (1)
- Size distribution (1)
- Sliding simulation (1)
- Slip-rolling (1)
- Slow crack growth (1)
- Slow crack growth (SCG) (1)
- Small angle x-ray scattering (1)
- Small-Angle X-ray Scattering (1)
- Small-angle Scattering (1)
- Soda-lime-silica glass (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Soil sample (1)
- Solid solution strengthening (1)
- Solidification (1)
- Space (1)
- Space exploration (1)
- Spark plasma sintering (1)
- Spinodal Decomposition (1)
- Split Hopkinson bar (1)
- Spring constant (1)
- Stainless steel (1)
- Steels (1)
- Strain rate dependence (1)
- Strength (1)
- Structural health monitoring (SHM) (1)
- Structure (1)
- Structure property correlations (1)
- Structure-property correlation (1)
- Structured Data (1)
- Structured heating (1)
- Subsurface defects (1)
- Superalloys (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superelasticity (1)
- Superlattice extrinsic stacking faults (1)
- Superlegierung (1)
- Surface Nucleation (1)
- Surface nucleation (1)
- Surface-induced Melting (1)
- Swept wavelength interferometry (SWI) (1)
- Synchrotron CT (1)
- Synchrotron radiation (1)
- Synchrotron tomography (1)
- TAHYA (1)
- TED (1)
- TMF (1)
- TMF experiments (1)
- Tb3+ (1)
- Technical Ceramics (1)
- Temperature driven process (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tempered martensite-ferritic steel (1)
- Tensile stress relaxation (1)
- Termites (1)
- Test Improvement (1)
- Texturation (1)
- Theranostics (1)
- Thermal degradation (1)
- Thermal stress (1)
- Thermo mechanical fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermo-mechanical-loading (1)
- Thermo-mechanics (1)
- Thermo-optical measurement (1)
- Thermoanalysis (1)
- Thermoanalytical Methods (1)
- Thermodynamic analysis (1)
- Thermodynamic stability (1)
- Thermodynamische Stabilität (1)
- Thermoelectric generator (1)
- Thermoelectric generator design (1)
- Thermoelectric oxide (1)
- Thermoelectric oxides (1)
- Thermogravimetric analysis (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Ermüdung (1)
- Thermoplastic (1)
- Thesaurus (1)
- Thin tribofilm (1)
- Tomography (1)
- Tools (1)
- Tooth wear (1)
- Transducers (1)
- Transmission electron microscope (TEM) (1)
- Two-photon adsorption (1)
- Two-photon polymerization (1)
- Under cyclic loading (1)
- Upconversion (1)
- Upconversion nanoparticles (1)
- Utilization, and storage (CCUS) technology (1)
- VCSEL (1)
- VM12 SHC (1)
- Vacancies (1)
- Vacuum hot extraction (1)
- Very high cycle fatigue (1)
- Vickers Hardness (1)
- Vickers hardness (1)
- Vickers indentation (1)
- Viscose sintering (1)
- Viscous sintering (1)
- Volume Fraction (1)
- Volume specific surface area (1)
- Wasser (1)
- Waste water (1)
- Water-based (1)
- Weibull distribution (1)
- Welding processing influences (1)
- Wet dispersion (1)
- White light emitters (1)
- Wind turbine blade shell structures (1)
- Withstand voltage tests (1)
- Women in science (1)
- Workshop (1)
- X-ray imaging (1)
- X-ray refractography (1)
- X-ray scattering (1)
- Young´s Modulus (1)
- Young’s Modulus (1)
- alumina (1)
- arbon capture (1)
- bioactive (1)
- biomaterials (1)
- bone (1)
- carbon steel (1)
- ceramic (1)
- ceramics (1)
- condensate (1)
- dental (1)
- electrochemical characterization (1)
- high entropy alloys (1)
- hydrogen storage (1)
- impurities (1)
- laser cladding (1)
- microstructure analysis (1)
- multi scale testing (1)
- oxidation (1)
- pitting corrosion (1)
- scanning electron microscopy (1)
- selective laser melting (1)
- sulfidation (1)
- utilization, and storage (CCUS) technology (1)
- volume resistivity (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (605) (entfernen)
Several studies have been shown that the electron beam can be used to create nanomaterials from microparticle targets in situ in a transmission electron microscope (TEM). Here, we show how this method has to be modified in order to synthesize plasmonic gold nanoparticles (NPs) on insulating silicon oxide substrate by employing a scanning electron microscope with a comparatively low acceleration voltage of 30 kV. The synthesized NPs exhibit a random distribution around the initial microparticle target: Their average size reduces from 150 nm to 3 nm with growing distance to the initial Au microparticle target. Similarly, their average distance increases. The synthesized NP assemblies therefore show distinctly different plasmonic behaviour with growing distance to the target, which allows to study consequences of random hybridization of surface plasmon in disordered system, such as Anderson localization. To reveal the surface plasmons and their localization behaviour we apply electron energy loss spectroscopy in the TEM.
The heat-resistant cast iron EN-GJSA-XNiSiCr35-5-2 (Ni-Resist D-5S) was investigated for its fatigue crack growth behavior at room and high temperatures. Force-controlled tests were carried out at constant temperatures (20 °C, 500 °C, 700 °C) without and with hold time and different load ratios. The crack growth behavior was also characterized under TMF loading (Tmin = 400 °C, Tmax = 700 °C) by applying IP and OP conditions and different load ratios. Three different techniques were combined to monitor crack growth: potential drop, thermography, and compliance method. The effect of the different loading conditions on the fatigue crack growth behavior will be presented and discussed.
This is the stable version of the full-notch creep test ontology (OntoFNCT) that ontologically represents the full-notch creep test. OntoFNCT has been developed in accordance with the corresponding test standard ISO 16770:2019-09 Plastics - Determination of environmental stress cracking (ESC) of polyethylene - Full-notch creep test (FNCT).
The OntoFNCT provides conceptualizations that are supposed to be valid for the description of full-notch creep tests and associated data in accordance with the corresponding test standard. By using OntoFNCT for storing full-notch creep test data, all data will be well structured and based on a common vocabulary agreed on by an expert group (generation of FAIR data) which is meant to lead to enhanced data interoperability. This comprises several data categories such as primary data, secondary data and metadata. Data will be human and machine readable. The usage of OntoFNCT facilitates data retrieval and downstream usage. Due to a close connection to the mid-level PMD core ontology (PMDco), the interoperability of full-notch creep test data is enhanced and querying in combination with other aspects and data within the broad field of materials science and engineering (MSE) is facilitated.
The class structure of OntoFNCT forms a comprehensible and semantic layer for unified storage of data generated in a full-notch creep test including the possibility to record data from analysis and re-evaluation. Furthermore, extensive metadata allows to assess data quality and reliability. Following the open world assumption, object properties are deliberately low restrictive and sparse.
Unlike conventional alloys, which typically consist of one main element, high-entropy alloys (HEAs) contain five or more principal elements, which broaden chemical complexity and with it a realm of synergistic mechanisms. The AlMo0.5NbTa0.5TiZr HEA initiated a subclass of Al-containing refractory (r)HEAs that has recently drawn attention [2]. The alloy has a superalloy-resembling B2/bcc nanostructure, which inspired its name refractory high entropy superalloy (RSA). With high-temperature (HT) compressive strengths beyond conventional Ni-based superalloys, this nanostructure could be used for improved HT structural applications. However, in the application-relevant HT regime the Al-Zr-rich B2 phase decomposes to form a hexagonal Al-Zr-based intermetallic (Al4-xZr5; x: 0..1) [3,4]. This work explores the fascinating yet fatal micromechanisms associated to this phase transformation, in the context of creep, annealing and oxidation experiments performed between 800 and 1200 °C.
The material was produced by arc-melting and heat treatment in argon, which lead to grain boundaries decorated with up to 7%. Interrupted constant-load creep tests were performed under vacuum (at 10-4 Pa), at 900–1100 °C with external tensile stresses of 30–120 MPa. Oxidation experiments were separately conducted for 24 hours at 800 and 1000 °C in both dry (21% O2 + 79% N2) and humid (8% O2 + 74% N2 + 18% H2O) air. After the experiments, the samples were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy to reveal degradation mechanisms. Crystallographic texture, orientation relationships and stabilization of an oxygen-containing iso structure (Al4-xZr5(Ox-y); y: 0..x) of the Al-Zr-rich intermetallic are found and discussed.
A giant Zn segregation transition is revealed using CALPHAD-integrated density-based modeling of segregation into Fe grain boundaries (GBs). The results show that above a threshold of only a few atomic percent Zn in the alloy, a substantial amount of up to 60 at.% Zn can segregate to the GB. We found that the amount of segregation abruptly increases with decreasing temperature, while the Zn content in the alloy required for triggering the segregation transition decreases. Direct evidence of the Zn segregation transition is obtained using high-resolution scanning transmission electron microscopy. Base on the model, we trace the origin of the segregation transition back to the low cohesive energy of Zn and a miscibility gap in Fe-Zn GB, arising from the magnetic ordering effect, which is confirmed by ab-initio calculations. We also show that the massive Zn segregation resulting from the segregation transition greatly assists with liquid wetting and reduces the work of separation along the GB. The current predictions suggest that control over Zn segregation, by both alloy design and optimizing the galvanization and welding processes, may offer preventive strategies against liquid metal embrittlement.
Today’s industrial demands challenge the research and development sector to make advances in the design and properties of materials that can withstand harsh environments. The AlMo0.5NbTa0.5TiZr refractory high-entropy superalloy (RSA), with a remarkable morphological similarity to the γ/γ' microstructure of Ni-based superalloys and promising high-temperature compressive properties, has been considered as a candidate for structural applications. However, additional properties need to be investigated in order to assess the suitability of this alloy for high temperature applications. Therefore, this work investigates the thermodynamic and microstructural stabilities of the RSA at room temperature and between 900 and 1100 °C, and their influence on the mechanical properties. Although it is possible to improve the mechanical properties at 20 °C by tuning the cooling rate, long-term high temperature exposures lead to phase instabilities that negatively influence the creep behavior.
This research deals with the development of the Vickers hardness knowledge graph, mapping the example dataset in them, and exporting the data-mapped knowledge graph as a machine-readable Resource Description Framework (RDF). Modeling the knowledge graph according to the standardized test procedure and using the appropriate upper-level ontologies were taken into consideration to develop the highly standardized, incorporable, and industrial applicable models. Furthermore, the Ontopanel approach was utilized for mapping the real experimental data in the developed knowledge graphs and the resulting RDF files were successfully evaluated through the SPARQL queries.
This study aims to represent an approach for transferring the materials testing datasets to the digital schema that meets the prerequisites of the semantic web. As a use case, the tensile stress relaxation testing method was evaluated and the testing datasets for several copper alloys were prepared. The tensile stress relaxation testing ontology (TSRTO) was modeled following the test standard requirements and by utilizing the appropriate upper-level ontologies. Eventually, mapping the testing datasets into the knowledge graph and converting the data-mapped graphs to the machine-readable Resource Description Framework (RDF) schema led to the preparation of the digital version of testing data which can be efficiently queried on the web.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as “electron beam-induced fragmentation” or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field B = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. B = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.
KupferDigital mechanical testing datasets: Stress relaxation and low-cycle fatigue (LCF) tests
(2024)
The KupferDigital project deals with the development of a data ecosystem for digital materials research on the basis of ontology-based digital representations of copper and copper alloys. This document provides exemplary mechanical testing datasets for training the developed KupferDigital infrastructures. Different types of cast copper alloys were provided for this research and their mechanical testing (stress relaxation and low-cycle fatigue) was performed in the accredited materials testing laboratory, while the test results were reported according to the DIN/ISO standards and attached with the maximum possible metadata about the sample history, equipment, and calibration. The attached content file consisted of the obtained primary raw testing data as well as the secondary datasets of these tests containing the detailed metadata of mechanical testing methods. Such test data files are processed by the KupferDigital digital tools to be converted to standardized machine-readable data files.
Following the new paradigm of materials development, design, and optimization, digitalization is the main goal in materials sciences and engineering (MSE) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web technologies (SWT) are used since they allow for machine-actionable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD, https://materialdigital.de) aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific support in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are semantically represented which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this presentation shows the efforts taken within the PMD project towards the digitalization in MSE such as the development of the mid-level PMD core ontology (PMDco, https://github.com/materialdigital/core-ontology). Furthermore, selected results of a PMD partner project use case addressing data and knowledge management from synthesis, production, and characterization of materials are shown.
This contribution presents the results of an experimental study on the LCF behavior of an austenitic 316L stainless steel produced by laser powder bed fusion featuring a low defect population, which allows for an improved understanding of the role of other typical aspects of a PBF‑LB microstructure. The LCF tests were performed between room temperature and 600 °C. A hot‑rolled 316L variant was tested as a reference. The mechanical response is characterized by strain-life curves, a Coffin‑Manson‑Basquin fitting, and cyclic deformation curves. The damage and deformation mechanisms are studied with X-ray computed tomography, optical and electron microscopy. The PBF‑LB/M/316L exhibits lower fatigue lives at lower strain amplitudes. The crack propagation is mainly transgranular. The solidification cellular structure seems to be the most relevant underlying microstructural feature determining the cyclic deformation behavior.
Gas turbine components, made of nickel-based alloys, undergo material damage due to high temperatures and mechanical stresses. These components need periodic replacement to avoid efficiency loss and failure. Repair of these parts is more cost-effective than replacement. State-of-the-art repair technologies, including different additive manufacturing (AM) and brazing processes, are considered for efficient restoration. Materials properties mismatches and/or internal defects in repaired parts may expedite crack initiation and propagation, reducing fatigue life. To understand the crack growth behavior in joining zones and predict the remaining life of repaired components, fatigue crack growth (FCG) tests were conducted on specimens of nickel-based alloys joined via brazing, pre-sintered preforms and AM. The FCG experimental technique was successfully adapted for joined specimens and results indicate that the investigated braze material provides a lower resistance to crack growth. In AM-sandwich specimens, the crack growth rates are significantly reduced at the interface of AM and cast material.
Motivated by the aim of developing an additive manufacturing (AM) technology easily integrated in the process chains of the ceramic industry, the LSD-print technology was conceived as a slurry-based variation of binder jetting (BJ).
BJ and other powder bed technologies (such as powder bed fusion) are amongst the most successful AM techniques, especially for metals and polymers, thanks to their high productivity and scalability. The possibility to use commercially available feedstocks (in the form of powders or granules) makes BJ also attractive for ceramic materials. The application of these techniques to most advanced ceramics has however been difficult so far, because of the limitations in depositing homogeneous layers with fine, typically poorly flowable powders.
In this context, the "layerwise slurry deposition" (LSD) was proposed at TU Clausthal (Germany) as a slurry-based deposition of ceramic layers by means of a doctor blade. Combined with layer-by-layer laser sintering of the material, the LSD process was originally demonstrated for the rapid prototyping of silicate ceramics. Due to the difficulties in controlling the microstructure and the defect formation in laser-sintered technical ceramics, the LSD process was later combined with inkjet printing in the LSD-print technology, which has been further developed at BAM (Germany) in the past decade.
The LSD-print technology combines the high speed of inkjet printing, typical of BJ, with the possibility of producing a variety of high-quality ceramics with properties comparable to those achieved by traditional processing. Due to the mechanical stability of the powder bed, the process can also be carried out with continuous layer deposition on a rotating platform, which further increases its productivity.
This presentation will delve into 10 years of research on the LSD-print of a wide variety of technical ceramics including alumina, silicon carbides and dental ceramics. The discussion highlights how a seemingly small process and feedstock modification (from powders to slurries) has great influence on the challenges and potential of this process, which are being addressed on its path to industrialization.
The Laser-Induced Slip Casting is an additive manufacturing technology specifically developed for ceramic materials using water-based ceramic slurries. The process takes place layer-by-layer in a similar fashion as top-down vat photopolymerization, selectively consolidating each layer by means of a laser energy source positioned on the top. Contrary to vat photopolymerization, in which the consolidation is achieved by selectively cross-linking a ceramic-filled resin, LIS uses water-based slurries with a low amount of organic additives (typically < 5 wt%) as feedstocks.
In LIS, a green body is formed by local evaporation of water which causes the suspension to collapse forming a cast, following a mechanism similar to slip casting. Only a small content of organic additives is needed to effectively disperse the ceramic particles and to increase the green strength.
The technology is very versatile and can be applied to all ceramic systems that can be dispersed in water. One of the main advantages is that even dark materials such as silicon carbide can be processed without issues related to light scattering and absorption.
The presentation will discuss strengths and limitations of LIS compared to other AM technologies and will highlight the latest results for alumina and for silicon carbide ceramics.
Powder bed technologies are amongst the most successful Additive Manufacturing (AM) techniques. The application of these techniques to most ceramics has been difficult so far, because of the challenges related to the deposition of homogeneous powder layers when using fine powders.
In this context, the "layerwise slurry deposition" (LSD) has been developed as a layer deposition method enabling the use of powder bed AM technologies also for advanced ceramic materials. The layerwise slurry deposition consists of the layer-by-layer deposition of a ceramic slurry by means of a doctor blade, in which the slurry is deposited and dried to achieve a highly packed powder. Not only very fine, submicron powders can be processed with low organics, but also the dense powder bed provides excellent support to the parts built. The LSD technology can be combined with binder jetting to develop the so-called “LSD-print” process. LSD-print combines the high-speed printing of binder jetting with the possibility of producing a variety of high-quality ceramics with properties comparable to traditional processing.
The latest development of this technology shows that it is possible to print ceramic parts in a continuous process by depositing a layer onto a rotating platform, growing a powder bed following a spiral motion. The unique mechanical stability of the layers in LSD-print allows to grow a powder bed several centimeters thick without any lateral support. The continuous layer deposition allows to achieve a productivity more than 10X higher compared to the linear deposition, approaching a build volume of 1 liter/hour.
Functional fatigue of shape-memory alloys is a considerable threat to the reliable service of actuation devices. Here, we demonstrate the essentially degradation-free cyclic phase-transformation behavior of Ni-Mn-Ga microcrystals up to one million stress-driven superelastic cycles. Cyclic dissipation amounts to about 1/5 of the bulk counterpart and remains unaffected during cycling, even after the introduction of dislocation structures via plastic straining. Plastic yielding and the transformation stress largely exceed the known bulk values. However, the transformation-stress is found to depend on plastic pre-straining, which suggests that the size-affected transformation stress is sensitive to the initial defect structure and that it can be tuned by a targeted introduction of dislocations. These findings demonstrate the high suitability of Ni-Mn-Ga as a robust shape-memory alloy in small-scale functional device engineering.
Fully automated and decentralized fused filament fabrication of ceramics for remote applications
(2024)
Manufacturing of ceramic components in remote (i.e., geographically isolated) settings poses significant challenges where access to conventional manufacturing facilities is limited or non-existent. Fused Filament Fabrication (FFF) enables the rapid manufacturing of ceramic components with complex geometries. Parts formed by FFF require subsequent debinding and sintering to reach full density. Debinding and sintering are typically executed in separate steps with different equipment, necessitating extensive human handling which hinders process automation and may be challenging for the operator in isolated environments. This poster presents an innovative approach: the integration of all process steps into a single, fully automated system, streamlining the process and minimizing human involvement. Our system combines a dual extrusion filament printer with a porous and heat-resistant ceramic print bed. The porous print bed enables mechanical interlocking of the first printed layers, ensuring adhesion and structural integrity during FFF. Ceramic parts are printed onto thin sacrificial rafts, which are built using an interface material with the same binder as the ceramic filament. After the print is completed, the heat-resistant print bed with all parts is transferred seamlessly with a carrier system into a high-temperature furnace for debinding and sintering. During sintering the sacrificial raft is disintegrated, allowing for unconstrained sintering of the ceramic parts and easy removal of the finished parts. In conclusion, our integrated approach enables significant advancements in the fabrication of complex ceramic components in remote environments with increased efficiency and minimal human handling.
The characterization of really unknown phases typically uses 70 to 150 reflectors for lattice metric calculation. The determination of the lattice parameters follows with 4% accuracy. Including a Z correction up to 1% can be reached. The precision of the lattice parameters ratios (a:b:c) is, however, better than 0.1%.
Electron Back Scatter Diffraction (EBSD) is a very versatile analytical technique allowing for the characterization of material structure. Historically, diffraction images (Kikuchi patterns) registered during EBSD analysis were solved using Hough/Radon transformation. The last decade brought several novel techniques of experimental pattern analysis, focusing entirely on image analysis routines such as pattern matching, or various variants of High-Resolution EBSD. However, all the above-mentioned techniques require prior knowledge of the material structure to perform orientation analysis. The recently presented algorithm employed in Crystallographic Analysis of Lattice Metric (CALM) software, effectively removes this limitation enabling a standard-less analytical approach in EBSD systems. At its core, the CALM technique couples accurate detection of the Kikuchi bands position, with a rigid construction of reciprocal lattice resulting from translational crystal symmetry. A unique characteristic of the methodology also gives an opportunity for application in the analysis of continuous lattice changes, for example tetragonality mapping. During mapping, however, the geometry of the gnomonic projection (represented by the projection center) is continuously altered decreasing overall algorithm efficiency. The work presents an analysis of the projection center in terms of precision and accuracy.
Following the new paradigm of materials development, design, and optimization, digitalization is the main goal in materials sciences and engineering (MSE) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web technologies (SWT) are used since they allow for machine-actionable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD) aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific support in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are semantically represented on a prototypical basis which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this poster presentation illustrates demonstrators developed and deployed within the PMD project. Semantically anchored using the mid-level PMD Core Ontology (PMDco), they address data transformation leading to a novel data management which is based on semantic integrated data. The PMD data acquisition pipeline (DAP), which is fueled by traditional, diverse data formats, and a pipeline applying an electronic laboratory notebook (ELN) as data source are displayed. Additionally, the efficient combination of diverse datasets originating from different sources is demonstrated by the representation of a use case dealing with the well-known Orowan relation.
Additive manufacturing (AM) offers significantly greater freedom of design compared to conventional manufacturing processes since the final parts are built layer by layer. This enables metal AM, also known as metal 3D printing, to be utilized for improving efficiency and functionality, for the production of parts with very complex geometries, and rapid prototyping. However, despite many technological advancements made in recent years, several challenges hinder the mass adoption of metal AM. One of these challenges is mechanical anisotropy which describes the dependency of material properties on the material orientation. Therefore, in this work, stainless steel 316L parts produced by laser-based powder bed fusion are used to isolate and understand the root cause of anisotropy in AM parts. Furthermore, an efficient and accurate multiscale numerical framework is presented for predicting the deformation behavior of actual AM parts on the macroscale undergoing large plastic deformations. Finally, a novel constitutive model for the plastic spin is formulated to capture the influence of the microstructure evolution on the material behavior on the macroscale.
AbstractThe high-temperature corrosion behaviors of the equimolar CrCoNi medium-entropy alloy and CrMnFeCoNi high-entropy alloy were studied in a gas atmosphere consisting of a volumetric mixture of 10% H2O, 2% O2, 0.5% SO2, and 87.5% Ar at 800 °C for up to 96 h. Both alloys were initially single-phase fcc with a mean grain size of ~ 50 μm and a homogeneous chemical composition. The oxide layer thickness of CrMnFeCoNi increased linearly with exposure time while it remained constant at ~ 1 μm for CrCoNi. A Cr2O3 layer and minor amounts of (Co,Ni)Cr2O4 developed on the latter while three oxide layers were detected on the former, i.e., a thin and continuous chromium rich oxide layer at the oxide/alloy interface, a dense (Mn,Cr)3O4 layer in the center and a thick and porous layer of Mn3O4 and MnSO4 at the gas/oxide interface. Additionally, a few metal sulfides were observed in the CrMnFeCoNi matrix. These results were found to be in reasonable agreement with thermodynamic calculations.
In order to be able to manipulate ceramic powder compacts and ceramic suspensions (slurries) within their volume with light, a minimum transparency of the materials is required. Compared to polymers and metals, ceramic materials are characterized by the fact that they have a wide electronic band gap and therefore a wide optical window of transparency. The optical window generally ranges from less than 0.3 µm to 5 µm wavelength. In order to focus light into the volume of a ceramic powder compact, its light scattering properties must therefore be tailored. In this study, we present the physical background and material development strategies for the application of two-photon polymerization (2PP) and selective volumetric sintering for the additive manufacturing of structures in the volume of ceramic slips and green compacts.
Manipulating ceramic powder compacts and ceramic suspensions (slurries) within their volume with light requires a minimum transparency of the materials. Compared to polymers and metals, ceramic materials are unique as they offer a wide electronic band gap and thus a wide optical window of transparency. The optical window typically ranges from below 0.3 µm up to 5µm wavelength. Hence, to penetrate with light into the volume of a ceramic powder compound, its light scattering properties need to be investigated and tailored. In the present study we introduce the physical background and material development strategies to apply two-photon-polymerization (2PP), and other volumetric methods for the additive manufacture of filigree structures within the volume of ceramic slurries.
The present work addresses powder bed binder jetting additive manufacturing by selective magnesium phosphate cement activation. Despite the potential of this technology to aid the digitalization of the construction industry, the effect of processing parameters on the mechanical performance of printed materials has not yet been studied to generate a guideline for the further development of the technology. Statistical methodologies were used to screen the effect of four printing process parameters (printing speed, layer thickness, raster angle, and build direction on flexural and compressive strength). As the exploited technology works with constant fluid pressure, the physical interpretation of the effect of each factor can be considered taking into account the interactions between the binder materials in the powder bed. Analysis of variance (ANOVA) indicated that printing speed and layer thickness significantly affect mechanical performances. Furthermore, the layout of samples for the printing process is preferable to be parallel the printhead movement. An anisotropic behavior was observed, and the samples subjected to compressive forces parallel to the layer plane possessed lower strength values. This effect can be interpreted as a result of a weak area of low density in between layers, leading to a pronounced delamination under compression. Even though the strength of the printed material is not suitable for a structural concrete, it can be marginally improved by design of experiment and optimized for non-structural applications, such as for porous artificial stone. Design of experiment coupled with ANOVA methods can be used in the future to support the development of novel material mixtures, thus expanding the fields of application of this novel additive manufacturing technology.
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.
Compared to mechanisms like solid solution strengthening, the stacking fault energy (SFE) should be considered as a further factor that influences the material properties. The effect of SFE of alloys or individual elements on strength and resistance can vary considerably. In the high-temperature regime above 700 ◦C, there are still significant gaps in the knowledge about the effect of the SFE on the mechanical properties of single-phase alloys. The effect of SFE on creep resistance of two face-entered cubic equiatomic medium and high entropy alloys, CrCoNi and CrMnFeCoNi, respectively, is evaluated to fill parts of these gaps. Using the Bridgman solidification process, the alloys were produced as single crystals and crept under vacuum at 700 ◦C up to 1100 ◦C. This work shows a significant impact of the lower SFE of CrCoNi on the creep behavior compared to the results of previous investigations of CrMnFeCoNi. The creep resistance of the former is higher over the complete temperature range. At very high temperatures, the strengthening effect of the stacking faults is significantly present. The formation of tetragonal stacking faults and extended dislocation nodes can be identified as the reason for this effect.
Laser Powder Bed Fusion (PBF-LB/M) of AISI 316L stainless steel has gained popularity due to its exceptional capacity to produce complex geometries and hierarchical microstructures, which can increase the yield strength while maintaining good ductility. Nevertheless, owing to high thermal gradients encountered during the process, the as printed 316L stainless steel often exhibit microstructural heterogeneities and residual stresses, which can limit its performance in demanding environments. Hence, employing heat treatments which balance the reduction of residual stresses while retaining improved static strength may be beneficial in various scenarios and applications. This study investigates the impact of post-processing heat treatments on the microstructure of 316L stainless steel manufactured via PBF-LB/M, along with its correlation with micro-hardness properties. To this end, 6 different heat treatments, i.e., 450 °C for 4h, 700 °C for 1h, 700 °C for 3h, 800 °C for 1h, 800 °C for 3h, and 900 °C for 1h, were applied to different specimens and Vickers hardness measurements (HV1) were performed in all states. At 800 °C, although the cellular structure appears to be retained, there is an observable increase in cellular size. However, while treatments exceeding 900 °C indicate no significant grain growth compared to other conditions, the cellular structure is entirely dissolved, which leads to a reduced Vickers hardness. The effect of the heat treatments on other microstructural features such as grain size and morphology, melt pool boundaries (MPB), crystallographic texture, chemical segregation, dispersoids and phase stability are also discussed in the present work
The damage mechanisms of metallic components produced by process laser powder bed fusion differ significantly from those typically observed in conventionally manufactured variants of the same alloy. This is due to the unique microstructures of additively manufactured materials. Herein, the focus is on the study of the evolution of creep damage in stainless steel 316L specimens produced by laser powder bed fusion. X-ray computed tomography is used to unravel the influence of the process-specific microstructure from the influence of the initial void distribution on creep damage mechanisms. The void distribution of two specimens tested at 600 °C and 650 °C is analyzed before a creep test, after an interruption, and after fracture. The results indicate that the formation of damage is not connected to the initial void distribution. Instead, damage accumulation at grain boundaries resulting from intergranular cracking is observed.
Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer-wise additive manufacturing process that provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of a diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative lattice plane suitable for residual stress analysis. In this contribution, the selection of a suitable lattice plane family for residual stress analysis is explored. Furthermore, the determination of an appropriate set of diffraction and single-crystal elastic constants depending on the underlying microstructure is addressed.
In-situ loading experiments have been performed at the Swiss Spallation Neutron Source with the main scope to study the deformation behaviour of laser powder bed fused Inconel 718. Cylindrical tensile bars have been subjected to an increasing mechanical load. At pre-defined steps, neutron diffraction data has been collected. After reaching the yield limit, unloads have been performed to study the accumulation of intergranular strain among various lattice plane families.
The general term additive manufacturing (AM) encompasses processes that enable the production of parts in a single manufacturing step. Among these, laser powder bed fusion (PBF-LB) is one of the most commonly used to produce metal components. In essence, a laser locally melts powder particles in a powder bed layer-by-layer to incrementally build a part. As a result, this process offers immense manufacturing flexibility and superior geometric design capabilities compared to conventional processes. However, these advantages come at a cost: the localized processing inevitably induces large thermal gradients, resulting in the formation of large thermal stress during manufacturing. In the best case, residual stress remains in the final parts produced as a footprint of this thermal stress. Since residual stress is well known to exacerbate the structural integrity of components, their assessment is important in two respects. First, to optimize process parameter to minimize residual stress magnitudes. Second, to study their effect on the structural integrity of components (e.g., validation of numerical models). Therefore, a reliable experimental assessment of residual stress is an important factor for the successful application of PBF-LB. In this context, diffraction-based techniques allow the non-destructive characterization of the residual stress. In essence, lattice strain is calculated from interplanar distances by application of Braggs law. From the known lattice strain, macroscopic stress can be determined using Hooke’s law. To allow the accurate assessment of the residual stress distribution by such methods, a couple of challenges in regard of the characteristic PBF-LB microstructures need to be overcome.
This presentation highlights some of the challenges regarding the accurate assessment of residual stress in PBF-LB on the example of the Nickel-based alloy Inconel 718. The most significant influencing factors are the use of the correct diffraction elastic constants, the choice of the stress-free reference, and the consideration of the crystallographic texture. Further, it is shown that laboratory X-ray diffraction methods characterizing residual stress at the surface are biased by the inherent surface roughness. Overall, the impact of the characteristic microstructure is most significant for the selection of the correct diffraction elastic constants. In view of the localized melting and solidification, no significant gradients of the stress-free reference are observed, even though the cell-like solidification sub-structure is known to be heterogeneous on the micro-scale.
Up to now, oriented surface crystallization phenomena are discussed controversially, and related studies are restricted to few glasses. For silicate glasses we found a good correlation between the calculated surface energy of crystal faces and oriented surface nucleation. Surface energies were estimated assuming that crystal surfaces resemble minimum energy crack paths along the given crystal plane. This concept was successfully applied at the Institute of Physics of Rennes in calculating fracture surface energies of glasses. Several oriented nucleation phenomena can be herby explained assuming that high energy crystal surfaces tend to be wetted by the melt. This would minimize the total interfacial energy of the nucleus. Furthermore, we will discuss the evolution of the microstructure and its effect on the preferred crystal orientation.
The manufacture of sintered glasses and glass-ceramics, glass matrix composites, and glass-bounded ceramics or pastes is often affected by un-expected gas bubble formation also named foaming. Against this background, in this presentation the main aspects and possible reasons of foaming are shown for completely different glass powders: a barium silicate glass powders used as SOFC sealants, and bioactive glass powders using different powder milling procedures.
Sintering and foaming were measured by means of heating microscopy backed up by XRD, differential thermal analysis (DTA), vacuum hot extraction (VHE), optical and electron microscopy, and infrared spectroscopy, and time-of-flight secondary ion mass spectrometry (ToF-SIMS).
Different densification was reached followed by significant foaming starting partly immediately, partly at higher temperature. Foaming increased significantly as milling progressed. For moderately milled glass powders, subsequent storage in air could also promote foaming. Although the milling atmosphere significantly affects the foaming of uniaxially pressed powder compacts sintered in air.
VHE studies show that foaming is driven by carbon gases and carbonates were detected by Infrared spectroscopy to provide the major foaming source. Carbonates could be detected even after heating to 750 °C, which hints on a thermally very stable species or mechanical trapping or encapsulating of CO2. Otherwise, dark gray compact colors for milling in isopropanol indicate the presence of residual carbon as well. Its significant contribution to foaming, however, could not be proved and might be limited by the diffusivity of oxygen needed for carbon oxidation to carbon gas.
The glass system (50NaPO3–20BaF2–10CaF2–20GdF3)-xTbCl3 with x = 0.3, 1, 3, 5, and 10 wt % was investigated. We successfully produced transparent glass ceramic (GC) scintillators with x = 1 through a melt-quenching process followed by thermal treatment. The luminescence and crystallization characteristics of these materials were thoroughly examined using various analytical methods. The nanocrystallization of Tb3+-doped Na5Gd9F32 within the doped fluoride-phosphate glasses resulted in enhanced photoluminescence (PL) and radioluminescence (RL) of the Tb3+ ions. The GC exhibited an internal PL quantum yield of 33 % and the integrated RL intensity across the UV-visible range was 36 % of that reported for the commercial BGO powder scintillator. This research showcases that Tb-doped fluoridephosphate GCs containing nanocrystalline Na5Gd9F32 have the potential to serve as efficient scintillators while having lower melting temperature compared to traditional silicate and germanate glasses.
Quantum dots (QDs) are remarkable semiconductor nanoparticles, whose optical properties are strongly size-dependent. Therefore, the real-time monitoring of crystal growth pathway during synthesis gives an excellent opportunity to a smart design of the QDs luminescence. In this work, we present a new approach for monitoring the formation of QDs in aqueous solution up to 90 °C, through in situ luminescence analysis, using CdTe as a model system. This technique allows a detailed examination of the evolution of their light emission. In contrast to in situ absorbance analysis, the in situ luminescence measurements in reflection geometry are particularly advantageous once they are not hindered by the concentration increase of the colloidal suspension. The synthesized particles were additionally characterized using X-ray diffraction analysis, transition electron microscopy, UV-Vis absorption and infrared spectroscopy. The infrared spectra showed that 3-mercaptopropionic acid (MPA)-based thiols are covalently bound on the surface of QDs and microscopy revealed the formation of CdS. Setting a total of 3 h of reaction time, for instance, the QDs synthesized at 70, 80 and 90 °C exhibit emission maxima centered at 550, 600 and 655 nm. The in situ monitoring approach opens doors for a more precise achievement of the desired emission wavelength of QDs.
As the development of optimized glass compositions by traditional trial-and-error methods is laborious, time consuming, and expensive, it is desirable to develop glass compositions based on a fundamental understanding of the glass structure and to establish structure-property relation models. Particularly, when it comes to optical applications of glasses doped with emissive trivalent rare earth ions (RE), the chemical environmental around the ions will have a direct influence on the radiative/non-radiative emission probabilities. The local vibrational environment and the chemical nature of the bonds in the first coordination sphere of the ions can be tailored, to good extent, based on structural information given by magnetic resonance techniques (NMR and EPR), associated to Raman and photophysical characterization. For the past 5 years, while still employed at the University of São Paulo, in Brazil, one of the interests of my research group has been the development of high-density fluoride-phosphate glasses as promising UV and X-ray scintillator materials. The targeted glasses offer a lower vibrational energy, less hygroscopic fluoride environment for the RE ions whereas the phosphate network provides better mechanical and chemical stability than a purely fluoride glass matrix. Different sets of glasses, based on the compositional system (Ba/Sr)F2-M(PO3)3-MF3-(Sc/Y)F3 where M = Al, In, Ga, and the phosphate component is substituted by the fluoride analogue in 10 - 30 mol%, were investigated, using Sc3+, Y3+, and the Eu3+ and Yb3+ dopants, as structural probes. Overall, results show that the desired RE coordination by fluorine, at a given F/P ratio, is proportional to the atomic mass of M (In> Ga> Al) and that the Ga- and In- based systems differ from the Al- one by near absence of P-O-P network linkages. That is, the network structures are dominated by Ga-O-P or In-O-P linkages, as evidenced by 31P MAS-NMR and Raman. These results are nicely corroborated by observation of decreased intensity of the vibronic band in Eu3+-doped glasses and marked increase in excited state lifetime values. Radioluminescence studies were carried out for a series of In-based glasses doped with Ce3+ and Tb3+, yielding intense emissions in the blue and green, respectively, compatible to the spectral region of the highest sensitivity of radiation sensor detectors. The aim of the presentation is to show how powerful the NMR and EPR techniques can be to provide decisive structural information, and to present the research perspectives in my new role as the Head of Division 5.6 – Glass at BAM.
Structure-property correlations in RE-doped fluoride-phosphate glasses sought by NMR, EPR & PL
(2024)
As the development of optimized glass compositions by traditional trial-and-error methods is laborious, expensive, and time consuming, it is desirable to gather fundamental understanding of structure and to develop structure-property relation models, which allow best and faster choices. Particularly, when it comes to optical applications of glasses doped with emissive trivalent rare earth ions (RE), the chemical environmental around the ions will have a direct influence on the radiative/non-radiative emission probabilities. The vibrational environment and the chemical nature of the bonds in the first coordination sphere of the ions can be tailored, to some extent, based on structural information given by magnetic resonance (NMR and EPR) techniques associated to Raman and photophysical characterization. For the past 5 years, one of the interests of my research group at the University of São Paulo, in Brazil, has been the development of high-density fluoride-phosphate glasses as promising UV and X-ray scintillator materials. The targeted glasses offer a lower vibrational energy, less hygroscopic fluoride environment for the RE ions whereas the phosphate network provides improved mechanical and chemical stability than a purely fluoride glass matrix. Different sets of glasses, based on the compositional system (Ba/Sr)F2-M(PO3)3-MF3-(Sc/Y)F3 where M = Al, In, Ga, and the phosphate component is substituted by the fluoride analogue in 10-30 mol%, were investigated, using Sc3+, Y3+, and the Eu3+ and Yb3+ dopants, as structural probes. Overall, results show that the desired RE coordination by F, at a given F/P ratio, is proportional to the atomic mass of M (In> Ga> Al) and that the Ga- and In- based systems differ from the Al- one by near absence of P-O-P network linkages i.e, the network structures are dominated by Ga-O-P or In-O-P linkages as evidenced by 31P MAS-NMR and Raman. These results are nicely corroborated by observation of decreased intensity in the vibronic band of Eu3+ and significant increase in the excited state lifetime values. Radioluminescence studies were carried out for a series of In-based glasses doped with Ce3+ and Tb3+ yielding intense emissions in the blue and green, respectively, compatible to the spectral region of highest sensitivity of radiation sensor detectors. The aim of the presentation is to show how powerful the combination of NMR, EPR, Raman and PLE spectroscopies can be to provide structural information and to present the perspectives for their introduction in the research agenda of Division 5.6 – Glass, which I now lead, at the Federal Institute for Materials Research and Testing (BAM) in Berlin, Germany.
Optical glasses and glass ceramics are present in many devices often used in our daily routine, such as the mobile phones and tablets. Since the 1960´s with the development of glass lasers, and more recently, within the search for efficient W-LEDs, sensors and solar converters, this class of materials has experienced extreme research progress. In order to tailor a material for such applications, it is very important to understand and characterize optical properties such as refractive index, transmission window, absorption and emission cross sections, quantum yields, etc. These properties can often be tuned by appropriate compositional choice and post-synthesis processing. In this lecture we will discuss the optical properties of glasses and glass ceramics, relevant to that end.
Age-hardenable aluminum alloys undergo precise heat treatments to yield nanometer-sized precipitates that increase their strength and durability by hindering the dislocation mobility. Tensile tests provide mechanical properties, while microstructure evaluation relies on transmission electron microscopy (TEM), specifically the use of dark-field TEM images for precise dimensional analysis of the precipitates. However, this manual process is time consuming, skill dependent, and prone to errors and reproducibility issues.
Our primary goal is to digitally represent these processes while adhering to FAIR principles. Ontologies play a critical role in facilitating semantic annotation of (meta)data and form the basis for advanced data management. Publishing raw data, digital workflows, and ontologies ensures reproducibility.
This work introduces innovative solutions to traditional bottlenecks and offers new perspectives on digitalization challenges in materials science. We support advanced data management by leveraging knowledge graphs and foster collaborative and open data ecosystems that potentially revolutionize materials research and discovery.
Glasses stand out by their wide and continuously tunable chemical composition and large variety of unique shaping techniques making them a key component of modern high technologies. Glass development, however, is still often too cost-, time- and energy-intensive. The use of robotic melting systems embedded in an ontology-based digital environment is intended to overcome these problems in future.
For this purpose, a robotic high throughput glass melting system is equipped with novel inline sensors for process monitoring, machine learning (ML)-based, adaptive algorithms for process monitoring and optimization, novel tools for high throughput glass analysis and ML-based algorithms for glass design. This includes software tools for data mining as well as property and process modelling. The presentation provides an overview of how all these tools merge into a digital infrastructure and illustrates their usability using examples.
All infrastructural parts were developed by a consortium consisting of the Fraunhofer ISC in Würzburg, the Friedrich-Schiller-University Jena (OSIM), the Clausthal University of Technology (INW) and the Federal Institute for Materials Research and Testing (BAM, Division Glasses) as part of a joint project of the German research initiative MaterialDigital.
Digital Transformation in Materials Science: Insights From the Platform MaterialDigital (PMD)
(2024)
The digital era has led to a significant increase in innovation in scientific research across diverse fields and sectors. Evolution of data-driven methodologies lead to a number of paradigm shifts how data, information, and knowledge is produced, understood, and analyzed. High profile paradigm shifts in the field of materials science (MS) include exploitative usage of computational tools, machine learning algorithms, and high-performance computing, which unlock novel avenues for investigating materials. In these presentations, we highlight prototype solutions developed in the context of the Platform MaterialDigital (PMD) project that addresses digitalization challenges. As part of the Material Digital Initiative, the PMD supports the establishment of a virtual materials data space and a systematic handling of hierarchical processes and materials data using a developed ontological framework as high priority work items. In particular, the mid-level ontology PMDco and its augmentation through application-specific ontologies are illustrated. As part of the conclusion, a discussion encompasses the evolutionary path of the ontological framework, taking into account standardization efforts and the integration of modern AI methodologies such as natural language processing (NLP). Moreover, demonstrators illustrated in these presentations highlight: The integration and interconnection of tools, such as digital workflows and ontologies, Semantic integration of diverse data as proof of concept for semantic interoperability, Improved reproducibility in image processing and analysis, and Seamless data acquisition pipelines supported by an ontological framework. In this context, concepts regarding the application of modern research data management tools, such as electronic laboratory notebooks (ELN) and laboratory information management systems (LIMS), are presented and elaborated on. Furthermore, the growing relevance of a standardized adoption of such technologies in the future landscape of digital initiatives is addressed. This is supposed to provide an additional basis for discussion with respect to possible collaborations.
Knowledge representation in the materials science and engineering (MSE) domain is a vast and multi-faceted challenge: Overlap, ambiguity, and inconsistency in terminology are common. Invariant and variant knowledge are difficult to align cross-domain. Generic top-level semantic terminology often is too abstract, while MSE domain terminology often is too specific.
This poster presents an approach to create and maintain a comprehensive and intuitive MSE-centric terminology by developing a mid-level ontology–the PMD core ontology (PMDco)–via MSE community-based curation procedures.
The PMDco is designed in direct support of the FAIR principles to address immediate needs of the global experts community and their requirements. The illustrated findings show how the PMDco bridges semantic gaps between high-level, MSE-specific, and other science domain semantics, how the PMDco lowers development and integration thresholds, and how to fuel it from real-world data sources ranging from manually conducted experiments and simulations as well as continuously automated industrial applications.
Following the new paradigm of materials development, design and optimization, digitalization is the main goal in materials sciences (MS) which imposes a huge challenge. In this respect, the quality assurance of processes and output data as well as the interoperability between applications following FAIR (findability, accessibility, interoperability, reusability) principles are to be ensured. For storage, processing, and querying of data in contextualized form, Semantic Web Technologies (SWT) are used since they allow for machine-understandable and human-readable knowledge representations needed for data management, retrieval, and (re)use.
The project ‘platform MaterialDigital’ (PMD) is part of an initiative that aims to bring together and support interested parties from both industrial and academic sectors in a sustainable manner in solving digitalization tasks and implementing digital solutions. Therefore, the establishment of a virtual material data space and the systematization of the handling of hierarchical, process-dependent material data are focused. Core points to be dealt with are the development of agreements on data structures and interfaces implemented in distinct software tools and to offer users specific added values in their projects. Furthermore, the platform contributes to a standardized description of data processing methods in materials research. In this respect, selected MSE methods are ontologically represented which are supposed to serve as best practice examples with respect to knowledge representation and the creation of knowledge graphs used for material data.
Accordingly, this presentation shows the efforts taken within the PMD project to store data in accordance with a testing standard compliant ontological representation of a tensile test of metals at room temperature (ISO 6892-1:2019-11). This includes the path from developing an ontology in accordance with the respective standard up to connecting the ontology and data. The semantic connection of the ontology and data leads to interoperability and an enhanced ability of querying. For further enhanced reusability of data and knowledge from synthesis, production, and characterization of materials, the PMD core ontology (PMDco) was developed as mid-level ontology in the field of MSE. The semantic connection of the tensile test ontology (TTO) to the PMDco leads to enhanced expressivity and interoperability.
Moreover, as a best practice example, generation and acquisition of test data semantically connected to the ontology (data mapping) was realized by applying an electronic laboratory notebook (ELN). Corresponding tensile tests were performed by materials science students at university. This enabled a fully digitally integrated experimental procedure that can be transferred to other test series and experiments. In addition to facilitating the acquisition, analysis, processing, and (re)usability of data, this also raises the awareness of students with respect to data structuring and semantic technologies in the sense of education and training. The entire data pipeline is further seamlessly integrable in a laboratory information management system (LIMS). More specifically, the integration of semantic conceptualization and knowledge graphs may become essential parts in LIMS as this would be very beneficial. Therefore, some first approaches of SWT integration in LIMS will also be presented briefly.
The digital era has led to a significant increase in innovation in scientific research across diverse fields and sectors. Evolution of data-driven methodologies lead to a number of paradigm shifts how data, information, and knowledge is produced, understood, and analyzed. High profile paradigm shifts in the field of materials science (MS) include exploitative usage of computational tools, machine learning algorithms, and high-performance computing, which unlock novel avenues for investigating materials. In these presentations, we highlight prototype solutions developed in the context of the Platform MaterialDigital (PMD) project that addresses digitalization challenges. As part of the Material Digital Initiative, the PMD supports the establishment of a virtual materials data space and a systematic handling of hierarchical processes and materials data using a developed ontological framework as high priority work items. In particular, the mid-level ontology PMDco and its augmentation through application-specific ontologies are illustrated. As part of the conclusion, a discussion encompasses the evolutionary path of the ontological framework, taking into account standardization efforts and the integration of modern AI methodologies such as natural language processing (NLP). Moreover, demonstrators illustrated in these presentations highlight: The integration and interconnection of tools, such as digital workflows and ontologies, Semantic integration of diverse data as proof of concept for semantic interoperability, Improved reproducibility in image processing and analysis, and Seamless data acquisition pipelines supported by an ontological framework. In this context, concepts regarding the application of modern research data management tools, such as electronic laboratory notebooks (ELN) and laboratory information management systems (LIMS), are presented and elaborated on. Furthermore, the growing relevance of a standardized adoption of such technologies in the future landscape of digital initiatives is addressed. This is supposed to provide an additional basis for discussion with respect to possible collaborations.
Spectroscopy Lectures
(2024)
As a guest professor of FUNGLASS, I delivered 3 lectures on spectroscopy to the Graduate School Program, the postdoctoral fellows and other researchers: 1) Introduction to spectroscopy applied to solid state materials (with focus on glass and glass ceramics); 2) Vibrational spectroscopy (Infrared and Raman); 3) Electron Paramagnetic Resonance