5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (121)
- Zeitschriftenartikel (71)
- Beitrag zu einem Tagungsband (24)
- Forschungsdatensatz (21)
- Posterpräsentation (20)
- Buchkapitel (7)
- Dissertation (4)
- Forschungsbericht (4)
- Sammelband (Herausgeberschaft für den kompletten Band) (3)
- Monografie (1)
Sprache
- Englisch (227)
- Deutsch (49)
- Französisch (1)
Schlagworte
- Ontology (33)
- Creep (27)
- Microstructure (23)
- Additive manufacturing (21)
- LCF (16)
- Additive Manufacturing (14)
- Degradation (13)
- Fatigue (13)
- Ti-6Al-4V (13)
- Aluminium (11)
- Alloy 2618A (10)
- Coarsening (10)
- FAIR (10)
- 316L (9)
- Aging (9)
- EN AW-2618A (9)
- Low Cycle Fatigue (9)
- Transmission electron microscopy (9)
- Crystal plasticity (8)
- Digitalization (8)
- Nickel-base superalloys (8)
- Ontologie (8)
- Residual stress (8)
- S-phase (8)
- Semantic Web Technologies (8)
- AGIL (7)
- AISI 316L (7)
- Additive Fertigung (7)
- Aluminium alloy (7)
- Anisotropy (7)
- Kriechen (7)
- Mechanical testing (7)
- Plattform MaterialDigital (7)
- Semantic Interoperability (7)
- Thermomechanical fatigue (7)
- Zugversuch (7)
- Data Interoperability (6)
- Knowledge Representation (6)
- Mikrostruktur (6)
- P92 (6)
- TMF (6)
- Computed Tomography (5)
- Crack growth (5)
- Damage (5)
- Dark-field transmission electron microscopy (DFTEM) (5)
- Data mapping (5)
- Digitalisierung (5)
- FAIR data (5)
- FAIR data management (5)
- Fe-Al alloys (5)
- HIP (5)
- Intermetallics (5)
- Iron aluminides (5)
- Knowledge graph and ontologies (5)
- Laser powder bed fusion (5)
- PMD Core Ontology (5)
- Reference data (5)
- Shear modulus (5)
- Stress relaxation (5)
- Tensile Test (5)
- Tensile testing (5)
- Wissensrepräsentation (5)
- Young's modulus (5)
- Aluminum alloys (4)
- Brinell hardness (4)
- Creep-fatigue (4)
- Data Fusion (4)
- EBSD (4)
- Elastic modulus (4)
- Electron microscopy (4)
- Fatigue crack growth (4)
- Laser Powder Bed Fusion (4)
- Microstrucrue Design (4)
- Ni-Resist (4)
- Normung (4)
- Phase-field simulation (4)
- Plattform Material Digital (4)
- Scale-bridging (4)
- Schädigung (4)
- Superalloy (4)
- Tensile Test Ontology (4)
- Tensile test (4)
- Virtual experiments (4)
- Crack (3)
- Crack propagation (3)
- Crack tip opening displacement (3)
- Creep behavior (3)
- Creep data (3)
- Dark-field transmission electron microscopy (3)
- Diffraction (3)
- Digtial Representation (3)
- Electronic Lab Notebook (3)
- Ferritic-martensitic steels (3)
- Fractography (3)
- Hardness (3)
- Heat treatment (3)
- High temperature mechanical properties (3)
- IN 718 (3)
- Interoperability (3)
- Knowledge graph (3)
- Lebensdauer (3)
- Low cycle fatigue (3)
- Mechanical behavior (3)
- Mechanische Eigenschaften (3)
- Metadata schema (3)
- Microstructure evolution (3)
- Ontologies (3)
- PBF-LB/M/316L (3)
- PMDco (3)
- Phase-field (3)
- Precipitation (3)
- Referenzdaten (3)
- Reproducibility (3)
- Research Data Management (3)
- S-Phase (3)
- Semantic Data (3)
- Semantic Web (3)
- Single-crystals (3)
- Superalloys (3)
- Superlegierung (3)
- Syngle Crystal alloy (3)
- Tempered Martensite Ferritic Steels (3)
- Tempered martensite-ferritic steel (3)
- Tensile data (3)
- Thermo-Mechanical Fatigue (3)
- Al-Cu-Li alloys (2)
- Alterung (2)
- Aluminium Alloy (2)
- Aluminum (2)
- Aluminum alloy (2)
- CALPHAD (2)
- CT (2)
- Casting (2)
- Chemo-mechanical coupling (2)
- Computed tomography (2)
- Concrete (2)
- Continnum damage model (2)
- Copper (2)
- Copper alloys (2)
- Creep-Fatigue (2)
- Cyclic softening (2)
- Data Management (2)
- Data Structures (2)
- Data management (2)
- Dataset (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Diffraction Elastic Constants (2)
- Diffusion (2)
- Digital material representation (2)
- Digital representation (2)
- Digitization (2)
- Dislocation (2)
- Dislocations (2)
- Elasticity (2)
- Electron Backscatter Diffraction (2)
- Electron backscatter diffraction (2)
- Environmentally assisted cracking (2)
- FAIR Data Management (2)
- Fatigue performance (2)
- Fatigue testing (2)
- Finite element analysis (2)
- Fracture mechanics (2)
- Glass forming (2)
- High Cycle Fatigue (2)
- High Temperature Testing (2)
- Joined nickel-based alloys (2)
- Kleinprobenprüfung (2)
- Knowledge Graph (2)
- Laser Powder Bed fusion (2)
- Long-term behavior (2)
- Mass transport (2)
- Material digital (2)
- Materials science (2)
- Metal seal (2)
- Micromechanical model (2)
- Microstructure-property-correlation (2)
- Multiaxial deformation (2)
- NFDI (2)
- Neutron diffraction (2)
- Nickel-base alloy (2)
- Notches (2)
- Ontologien (2)
- Ontology development (2)
- Ostwald ripening (2)
- PMD (2)
- Parametric modeling (2)
- Plastic deformation (2)
- Polymer (2)
- Probengrößeneffekt (2)
- Rapid solidification (2)
- Residual Stress (2)
- S355 steel sheet (2)
- Semantic Representation (2)
- Semantic web (2)
- Semantisches Web (2)
- Simulation (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Standard (2)
- Standardisierung (2)
- Standardization (2)
- Structural steel (2)
- Superconducting magnet (2)
- Symmetric dwell periods (2)
- TEM (2)
- Tensile Properties (2)
- Thermodynamics (2)
- Ti64 (2)
- TiAl5V4 (2)
- Titan (2)
- Titanium (2)
- Under cyclic loading (2)
- Vickers hardness (2)
- Viscoplasticity (2)
- Wall thickness (2)
- Zugeigenschaften (2)
- 316L stainless steel (1)
- 3D-finite element modeling (1)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AM (1)
- Abgasturbolader Heißteile (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Accessible (1)
- Age hardening (1)
- Ageing (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu-Li-alloy (1)
- Al-Li alloys (1)
- Al2CuMg (1)
- Allgemeine Grundlagen (1)
- Alloy 2818A (1)
- Alloy design (1)
- Alloy microstructure (1)
- Aluminiumlegierung (1)
- Aluminum Alloy Aging (1)
- Anwendungen (1)
- Atomistic simulations (1)
- Aufbau von Festkörpern (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic cast iron (1)
- Austenitischer Stahl (1)
- Automatable digital approach (1)
- Automated finite element analysis (1)
- Automated image analysis (1)
- Automation (1)
- Automatische Finite Element Simulation (1)
- Beanspruchung (1)
- Bitter technique (1)
- Bruch (1)
- CKAN (1)
- CMSX4 (1)
- Calibration (1)
- Carbon steel (1)
- Centrifugal casting (1)
- Centrifugal compressor wheel (1)
- Characterisation (1)
- Characterization (1)
- Charpy test (1)
- Chemische Analyse (1)
- Coefficient of thermal expansion (1)
- Complex borides (1)
- Compositionally complex alloys (1)
- Contact mechanics (1)
- Corrosion (1)
- Craze-crack mechanism (1)
- Creep behaviour (1)
- Creep mechanisms (1)
- Creep, Creep Rupture, and Stress Rupture (1)
- Creep-fatigue interaction (1)
- Crystal Defects (1)
- Crystal Plasticity Modelling (1)
- Crystalline defects (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- DED-L (1)
- DIN (1)
- Damage Behavior (1)
- Damage behavior (1)
- Data Exchange (1)
- Data Integration (1)
- Data Mapping (1)
- Data format (1)
- Data infrastructures (1)
- Data linking (1)
- Data pipeline concept (1)
- Data storage (1)
- Data structure (1)
- Datenfusion (1)
- Datenökosystem (1)
- Defects (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation (1)
- Deformation mechanisms (1)
- Demonstrators (1)
- Die casting (1)
- Differential scanning calorimetry (DSC) (1)
- Digital Transformation (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflow (1)
- Digital workflows (1)
- Digitalizations (1)
- Domain Ontology Development (1)
- Dwell periods (1)
- Dwell times (1)
- Dwell-Fatigue (1)
- EN AW 2618A (1)
- EN AW 2618A a (1)
- Eigenschaften (1)
- Eigenspannung (1)
- Elastic constants (1)
- Elastic energy (1)
- Elctronic Lab Notebook (1)
- Electrical resistance (1)
- Electrochemical dressing (1)
- Electropolishing (1)
- Elektronisches Laborbuch (ELN) (1)
- Elektrotechnische Grundlagen (1)
- Energiewende (1)
- Energy transition (1)
- Entwicklung (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmental stress cracking (ESC) (1)
- Ermüdung (1)
- Expanding cavity model (1)
- FAIR Data (1)
- FAIR data. (1)
- FAIR principles (1)
- FAIR research data management (1)
- FNCT (1)
- Fatigue crack propagation (1)
- Fatigue damage (1)
- Ferritic–martensitic steel (1)
- Finite elmenet simulation (1)
- Finite-Elemente-Methode (1)
- Fourier series (1)
- Full notch creep test (FNCT) (1)
- Full-Notch Creep Test (1)
- Full-notch creep test (1)
- Fullerite (1)
- GMR (1)
- GMR sensors (1)
- Gefügeuntersuchung (1)
- Gefügte Nickelbasislegierungen (1)
- General Chemistry (1)
- General Computer Science (1)
- General Engineering (1)
- General Materials Science (1)
- Glas (1)
- Gleichgewicht (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundaries (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary thermodynamics (1)
- Graphic design (1)
- Grundlagen des Maschinenbaus (1)
- HCF (1)
- Hardness test (1)
- Heat Treatment (1)
- Hertzian cracks (1)
- High cycle fatigue (1)
- High entropy alloy (1)
- High entropy alloys (1)
- High-Entropy Alloys (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature corrosion (1)
- Hochentropie-Legierung (1)
- Hochtemperatur (1)
- Hochtemperaturermüdung (1)
- Honing (1)
- Honing Stone (1)
- Hot isostatic pressing (HIP) (1)
- IN718 (1)
- In-Situ Testing (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ diffraction (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Industrial and Manufacturing Engineering (1)
- Informationstechnische Grundlagen (1)
- Interfacial Spinodal (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Intermetallische FeAl-Legierungen (1)
- Interoperable (1)
- Inverse ostwald ripening (1)
- Investment casting (1)
- Irregular topography (1)
- Isostatic hot pressing (HIP) (1)
- Kennwertermittlung (1)
- Keramik (1)
- Knowledge Graphs (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- Korrosion (1)
- Kreislaufwirtschaft (1)
- Kriechermüdung (1)
- Kristallsystem (1)
- Kupfer (1)
- L-PBF 316L (1)
- LMD (1)
- Laser Poeder Bed Fusion (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser Scanning Microscopy (1)
- Laser beam melting (LBM) (1)
- Laser powder-based directed energy deposition (1)
- Laser scanning microscopy (LSM) (1)
- Laser-Pulverbettschmelzen (1)
- Layering misalignment (1)
- Lebensdauervorhersage (1)
- Legierung mit komplexer Zusammensetzung (1)
- Life cycle (1)
- Lifetime prediction (1)
- Linked open data (1)
- Long-term aging (1)
- Low Cycle Fatigue (LCF) (1)
- Low carbon steel (1)
- Low strain (1)
- Low-Cycle Fatigue (LCF) (1)
- Low-Cycle-Fatigue (1)
- Low-cycle fatigue (1)
- Low-cycle fatigue. (1)
- Low-cycle-fatigue behaviour (1)
- Lötverbindung (1)
- Machine learning (1)
- Magnetic domain distribution (1)
- Magnetic domains (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetische Domänen (1)
- Magnetoelastic effect (1)
- Magnetoelastischer Effekt (1)
- Magnetomechanical effect (1)
- Martensitic transformation (1)
- Mat-o-lab (1)
- Material Life Cycle (1)
- Material degradation (1)
- Material modeling (1)
- MaterialDigital (1)
- Materialcharakterisierung (1)
- Materialentwicklung (1)
- Materialkreislauf (1)
- Materialprüfung (1)
- Materials Chemistry (1)
- Materials Science (1)
- Materials Testing (1)
- Materials and Processes Data Reusability (1)
- Materials informatics (1)
- Materials science and engineering (1)
- Materials testing (1)
- Mathematisch-naturwissenschaftliche Grundlagen (1)
- Mechanical Engineering (1)
- Mechanical Properties (1)
- Mechanical anisotropy (1)
- Mechanics of Materials (1)
- Mechanisches Verhalten (1)
- Mechanistic Modelling (1)
- Mehrachsige Verformung (1)
- Mehrskalenmodell (1)
- Metal Magnetic Memory (1)
- Metal magnetic memory (1)
- Metall (1)
- Metals and Alloys (1)
- Micro computed tomography (1)
- Microstructural evolution (1)
- Microstructure analysis (1)
- Microstructure characterisation (1)
- Microstructure modification (1)
- Mid-Level Ontology for MSE (1)
- Mikro-Computertomographie (1)
- Mikrostrukturentwicklung (1)
- Mikrostrukturuntersuchung (1)
- Miniature specimens (1)
- Misfitting precipitate (1)
- Missing acknowledgment (1)
- Model (1)
- Modeling (1)
- Modell (1)
- Molecular dynamics (1)
- NFDI-MatWerk (1)
- NIST (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- NiTi (1)
- Nickel alloys (1)
- Nickel-base superalloy (1)
- Nimonic 75 (1)
- Non-destructive Materials (1)
- Non-destructive testing (1)
- Notch (1)
- Number density (1)
- Numerische Simulation (1)
- Ordering (1)
- Orowan Mechanism (1)
- Overaging (1)
- P92 steels (1)
- PE-HD (1)
- Phase Diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase field simulation (1)
- Phase stability (1)
- Phase-field model (1)
- Plasticity (1)
- Platform Material Digital (1)
- Platform Material Digital (PMD) (1)
- Platform MaterialDigital (1)
- Platform MaterialDigital (PMD) (1)
- Plattform Material Digital (PMD) (1)
- Polyethylene (1)
- Pore (1)
- Pores (1)
- Porosity (1)
- Positron annihilation spectroscopy (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitates (1)
- Precipitation Analysis (1)
- Precipitation hardening (1)
- Process development (1)
- Quantitative Precipitation Analysis (1)
- Quantitative image analysis (1)
- Radii distribution (1)
- Rafting (1)
- Reference Data (1)
- Reference Dataset (1)
- Reference material BCR-425 (1)
- Referenzmaterial (1)
- Referenzorganismus (1)
- Referenzverfahren (1)
- Reheating (1)
- Relaxation fatigue (1)
- Relaxation tests (1)
- Resonance testing (1)
- Reusability (1)
- Reusable data (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissfortschritt (1)
- Rissverlauf (1)
- SEN-Probe (1)
- Safety (1)
- Schadenskunde (1)
- Selective laser melting (1)
- Selective laser melting (SLM) (1)
- Semantic Data Integration (1)
- Semantic Interioerability (1)
- Semantic Web technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic structuring (1)
- Semantische Daten (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear testing (1)
- Simulationsgestützte Gießkonzepte (1)
- Single crystal superalloys (1)
- Single-crystal (1)
- Slow crack growth (SCG) (1)
- Solidification (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Standardisation (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structured Data (1)
- Struktur (1)
- Superalloy single crystals (1)
- T1 precipitate (1)
- TIG-welding (1)
- TMF experiments (1)
- Temperature dependence (1)
- Tempered martensite ferritic steels (1)
- Tensile properties (1)
- Tensile strength (1)
- Tensile stress relaxation (1)
- Tensile stress relaxation testing (1)
- Tensile tests (1)
- Texture (1)
- Thermal Cycling (1)
- Thermal expansion (1)
- Thermo-mechanical fatigue (1)
- Thermographie (1)
- Thermomechanical Fatigue (TMF) (1)
- Thermomechanische Ermüdung (1)
- Thermophysikalische Eigenschaften (1)
- Thesaurus (1)
- Thickening (1)
- Tools (1)
- Topography (1)
- Transmission electron microscopy (TEM) (1)
- Tribologie (1)
- Ungleichgewicht (1)
- Unlegierter Baustahl (1)
- Vacancies (1)
- Verbundwerkstoff (1)
- Vernetzung (1)
- Vickers Hardness (1)
- Virtueller Materialdatenraum (1)
- Viskoplastisch (1)
- Visual ontology development (1)
- Vocabulary providers (1)
- Volume fraction (1)
- Werkstoffauswahl (1)
- Werkstoffkennwerte (1)
- Werkstoffmechanische Prüfung (1)
- Werkstoffprüfung (1)
- Workshop (1)
- X-ray computed tomography (CT) (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Zerstörungsfreie Prüfung (1)
- Zugversuchsontologie (1)
- coarsening (1)
- hardness (1)
- microstructural changes (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.2 Metallische Hochtemperaturwerkstoffe (277) (entfernen)
Paper des Monats
- ja (1)
Due to combined cyclic mechanical and thermal loading during operation, the material of exhaust gas conducting components of combustion engines is exposed to thermomechanical fatigue (TMF). This leads to formation and growth of cracks, especially at the most highly stressed points of these components. In order to better predict the service life of cracked components before failure, it is necessary to identify a crack propagation law for the material used. Isothermal crack propagation tests have been carried out at several temperatures with a typical cast iron to identify such a law. The crack length is measured by the potential drop method. The compliance method, fractography and thermographic camera measurements have been used to validate and calibrate the potential drop measurements. Each of the isothermal tests has been simulated using a specially developed FEM-algorithm based on remeshing and remapping. This algorithm has been implemented in python and ABAQUS. Thereby, the crack tip region is modeled by collapsed Quad8 elements. From the individual simulations, the cyclic crack tip opening displacement (ΔCTOD) is extracted and regarded as a potential fracture mechanics parameter which controls the crack growth rate. By combining the data from the experiments and the simulations, the crack propagation law has been identified. Finally, anisothermal crack propagation tests have been performed for validation of the crack growth law.
Das hochaktuelle Thema der Integration und Wiederverwendung von Wissen und Daten aus Herstellung, Bearbeitung und Charakterisierung von Materialien ('Digitalisierung von Materialien') wird in den Projekten Innovationsplattform MaterialDigital (PMD, materialdigital.de) und Materials-open-Lab (Mat-o-Lab, matolab.org) adressiert. In diesem Beitrag werden die Weiterentwicklungen in diesen Projekten hinsichtlich der Speicherung von Zugversuchsdaten gemäß einer normenkonformen (DIN EN ISO 6892-1:2019-11) ontologischen Repräsentation vorgestellt. Das umfasst den Weg von der Entwicklung einer Ontologie nach Norm, der Konvertierung von Daten aus Standardtests in das interoperable RDF-Format bis hin zur Verknüpfung von Ontologie und Daten. Letztendlich können die entsprechenden Daten in einem Triple Store abgelegt und abgefragt werden.
Additive manufacturing methods such as laser powder bed fusion (LPBF) allow geometrically complex parts to be manufactured within a single step. However, as an aftereffect of the localized heat input, the rapid cooling rates are the origin of the large residual stress (RS) retained in as-manufactured parts. With a view on the microstructure, the rapid directional cooling leads to a cellular solidification mode which is accompanied by columnar grown grains possessing crystallographic texture. The solidification conditions can be controlled by the processing parameters and the scanning strategy. Thus, the process allows one to tailor the microstructure and the texture to the specific needs. Yet, such microstructures are not only the origin of the mechanical anisotropy but also pose metrological challenges for the diffraction-based RS determination. In that context the micromechanical elastic anisotropy plays an important role: it translates the measured microscopic strain to macroscopic stress. Therefore, it is of uttermost importance to understand the influence of the hierarchical microstructures and the texture on the elastic anisotropy of LPBF manufactured materials.
This study reveals the influence of the build orientation and the texture on the micro-mechanical anisotropy of as-built Inconel 718. Through variations of the build orientation and the scanning strategy, we manufactured specimens possessing [001]/[011]-, [001]-, and [011]/[111]-type textures. The resulting microstructures lead to differences in the macroscopic mechanical properties. Even further, tensile in-situ loading experiments during neutron diffraction measurements along the different texture components revealed differences in the microstrain response of multiple crystal lattice planes. In particular, the load partitioning and the residual strain accumulation among the [011]/[111] textured specimen displayed distinct differences measured up to a macroscopic strain of 10 %. However, the behavior of the specimens possessing [001]/[011]-and [001]-type texture was only minorly affected. The consequences on the metrology of RS analysis by diffraction-based methods are discussed.
The manufacturability of metallic alloys using laser-based additive manufacturing methods such as laser powder bed fusion has substantially improved within the last decade. However, local melting and solidification cause hierarchically structured and crystallographically textured microstructures possessing large residual stress. Such microstructures are not only the origin of mechanical anisotropy but also pose metrological challenges for the diffraction-based residual stress determination. Here we demonstrate the influence of the build orientation and the texture on the microstructure and consequently the mechanical anisotropy of as-built Inconel 718. For this purpose, we manufactured specimens with [001]/[011]-, [001]- and [011]/[111]-type textures along their loading direction. In addition to changes in the Young’s moduli, the differences in the crystallographic textures result in variations of the yield and ultimate tensile strengths. With this in mind, we studied the anisotropy on the micromechanical scale by subjecting the specimens to tensile loads along the different texture directions during in situ neutron diffraction experiments. In this context, the response of multiple lattice planes up to a tensile strain of 10% displayed differences in the load partitioning and the residual strain accumulation for the specimen with [011]/[111]-type texture. However, the relative behavior of the specimens possessing an [001]/[011]- and [001]-type texture remained qualitatively similar. The consequences on the metrology of residual stress determination methods are discussed.
Creep and creep damage behavior of stainless steel 316L manufactured by laser powder bed fusion
(2022)
This study presents a thorough characterization of the creep properties of austenitic stainless steel 316L produced by laser powder bed fusion (LPBF 316L) contributing to the sparse available data to date. Experimental results (mechanical tests, microscopy, X-ray computed tomography) concerning the creep deformation and damage mechanisms are presented and discussed. The tested LPBF material exhibits a low defect population, which allows for the isolation and improved understanding of the effect of other typical aspects of an LPBF microstructure on the creep behavior. As a benchmark to assess the material properties of the LPBF 316L, a conventionally manufactured variant of 316L was also tested. To characterize the creep properties, hot tensile tests and constant force creep tests at 600 °C and 650 °C are performed. The creep stress exponents of the LPBF material are smaller than that of the conventional variant. The primary and secondary creep stages and the times to rupture of the LPBF material are shorter than the hot rolled 316L. Overall the creep damage is more extensive in the LPBF material. The creep damage of the LPBF material is overall mainly intergranular. It is presumably caused and accelerated by both the appearance of precipitates at the grain boundaries and the unfavorable orientation of the grain boundaries. Neither the melt pool boundaries nor entrapped gas pores show a significant influence on the creep damage mechanism.
Laser powder bed fusion (PBF-LB/M) of metallic alloys is a layer wise additive manufacturing process which provides significant scope for more efficient designs of components, benefiting performance and weight, leading to efficiency improvements for various sectors of industry. However, to benefit from these design freedoms, knowledge of the high produced induced residual stress and mechanical property anisotropy associated with the unique microstructures is critical. X-ray and neutron diffraction are considered the benchmark for non-destructive characterization of surface and bulk internal residual stress. The latter, characterized by the high penetration power in most engineering alloys, allows for the use of diffraction angle close to 90° enabling a near cubic sampling volume to be specified. However, the complex microstructures of columnar growth with inherent crystallographic texture typically produced during PBF-LB/M of metallics present significant challenges to the assumptions typically required for time efficient determination of residual stress. These challenges include the selection of an appropriate set of diffraction elastic constants and a representative strain-free reference for the material of interest. In this presentation advancements in the field of diffraction-based residual stress analysis of L-PBF Inconel 718 will be presented. The choice of an appropriate set of diffraction-elastic constants depending on the underlying microstructure will be described.
The dataset contains experimental mechanical data from complex service-like creep-fatigue experiments performed isothermally at 620 °C and a low strain amplitude of 0.2 % on tempered martensite-ferritic grade P92 steel. The data sets in text file format provide cyclic deformation (min. and max. stresses) and the total (hysteresis) data of all recorded fatigue cycles for three different creep-fatigue experiments: 1) a standard relaxation fatigue (RF) test with symmetrical dwell times of three minutes introduced at minimum and maximum strain, 2) a fully strain-controlled service-like relaxation (SLR) test combining these three-minute peak strain dwells with a 30-minute dwell in between at zero strain, and 3) a partly stress-controlled service-like creep (SLC) test combining the three-minute peak strain dwells with 30-minute dwells at constant stress.
Further information on data and data acquisition, analysis, and experimental details are given in “Experimental Data from Service-Like Creep-Fatigue Experiments on Grade P92 Steel”, submitted to Data in Brief. Additional analyses of these datasets, as well as experimental findings and discussions are presented in “Creep-Fatigue of P92 in Service-Like Tests with Combined Stress- and Strain-Controlled Dwell Times”, submitted to International Journal of Fatigue.
Entwicklung der Mikrostruktur der mechanischen Eigenschaften und der Eigenspannungen in L-PBF 316L
(2022)
Die additive Fertigung (AM) metallischer Werkstoffe mittels Laser Powder Bed Fusion (L-PBF) ermöglicht einzigartige hierarchische Mikrostrukturen, die zu Verbesserungen bestimmter mechanischer Eigenschaften gegenüber konventionell hergestellten Varianten derselben Legierung führen können. Allerdings ist das L-PBF-Verfahren häufig durch das Vorhandensein hoher Eigenspannungen gekennzeichnet, die es zu verstehen und zu mindern gilt. Daher ist das Verständnis der Mikrostrukturen, der Eigenspannungen und der daraus resultierenden mechanischen Eigenschaften entscheidend für eine breite Akzeptanz bei sicherheitskritischen Anwendungen. Die BAM hat ein multidisziplinäres Forschungsprogramm gestartet, um diese Aspekte bei LPBF 316L zu untersuchen. Der vorliegende Beitrag stellt einige der wichtigsten Ergebnisse vor: der Einfluss von Prozessparametern auf die Mikrostruktur, der Einfluss von Mikrostruktur und Textur auf die Festigkeit, Kriechverhalten und Schädigung und die Stabilität von Eigenspannungen und Mikrostruktur unter Wärmebehandlungsbedingungen.
Tempered martensite-ferritic steels, such as the grade P92 steel studied in this contribution, exhibit pronounced macroscopic cyclic softening under isothermal low-cycle fatigue (LCF) and non-isothermal thermomechanical fatigue (TMF) conditions, which is considered to be the predominant degradation mechanism in high-temperature fatigue in this and other material groups. However, such softening processes are highly complex since microscopic (e.g., recovery) and macroscopic (e.g., crack initiation and growth), as well as global and local effects superimpose, especially under creep-fatigue conditions. In this contribution, we discuss the cyclic deformation and softening behavior of P92 in strain-controlled LCF, in-phase (IP) TMF, and out-of-phase (OP) TMF tests with and without dwell times in the temperature range from 300 °C to 620°C. EBSD-based dislocation analysis on various fatigued material states confirms the continuous redistribution and annihilation of geometrically necessary dislocations in all studied states, which can be quantitatively correlated with macroscopic softening despite different damage mechanisms for different test types. Deviations from this correlation are observed for OP TMF and LCF with dwell times, i.e., for conditions where optical microscopy reveals pronounced crack-oxidation interactions at the specimen surfaces.
The article covers data on the Brinell hardness of the forged precipitation-hardened aluminum alloy EN AW-2618A in the initial T61 condition (i. e. slightly underaged) and after isothermal aging for up to 25,0 0 0 h at aging temperatures between 160 °C and 350 °C. In addition, the hardness was determined on specimens after creep testing at 190 °C and various stresses. The hardness decreases with increasing ag- ing time due to the microstructural evolution of the harden- ing precipitates. The drop occurs faster the higher the aging temperature. Aging under creep load additionally accelerates the hardness decrease.
Die HÜTTE ist ein Kompendium und Nachschlagewerk für unterschiedliche Aufgabenstellungen. Durch Kombination der Einzeldisziplinen dieses Wissenskreises kann das multidisziplinäre Grundwissen für die verschiedenen Technikbereiche und Ingenieuraufgaben zusammengestellt werden.
Die HÜTTE enthält in drei Bänden - orientiert am Stand von Wissenschaft und Technik und den Lehrplänen der Technischen Universitäten und Hochschulen - die Grundlagen des Ingenieurwissens.
Band 3 enthält die Elektro- und informationstechnische Grundlagen.
This research deals with the development of the Vickers hardness knowledge graph, mapping the example dataset in them, and exporting the data-mapped knowledge graph as a machine-readable Resource Description Framework (RDF). Modeling the knowledge graph according to the standardized test procedure and using the appropriate upper-level ontologies were taken into consideration to develop the highly standardized, incorporable, and industrial applicable models. Furthermore, the Ontopanel approach was utilized for mapping the real experimental data in the developed knowledge graphs and the resulting RDF files were successfully evaluated through the SPARQL queries.
Iron aluminides, already reported in the late 19th century, did not cease to attract the interest of scientists and engineers ever since. Besides good oxidation resistance, low density and resource availability, potentials for hightemperature strengths that compete with high-alloy steels were unlocked by low alloy contents. Still, research on alloy design continues, as alloying usually comes at the price of brittleness in low-temperature regimes. A potential candidate is the quinary Fe–Al–Mo–Ti–B system which is strengthened by solid solution and eutectic borides. It was shown to have good strength and outstanding creep resistance under compressive loading up to elevated temperatures. Although the individual effect of alloy additions is well understood in iron aluminides, little is known about the combined effects of alloying concentrations on microstructure, phase stability and mechanical properties. Therefore a systematic study of two Ti-doped near-Fe3Al alloys with varying contents of Mo (2–4 at.%) and B (0.5–1 at.%) was conducted. In total eight different alloys were fabricated by investment casting into ceramic shell molds. Alloys were characterized and compared by grain size, phase transitions, microstructure evolution as well as elemental compositions and volume fractions of phases. For mechanical characterization, macrohardness and microhardness tests as well as tensile tests at ambient and high tempera tures were conducted. Independent of alloy additions, alloys with 24–25 at.% Al exhibit superior proof strength due to a higher matrix hardness. Decreasing B content generally decreases strength by lower secondary phase fractions which contribute via particle hardening. Reducing Mo content decreases both the solute concentration in the matrix and secondary phase fractions. Surprisingly, strength is similar or even superior to alloys with higher Mo content. Strength relations are discussed with a focus on solid-solution hardening theory and other competing strengthening mechanisms.
Die Steigerung der Leistung und des thermodynamischen Wirkungsgrades von Verbrennungsmotoren führt zu erhöhten Anforderungen an die Festigkeit abgasführender Komponenten wie z. Bsp. Abgasturbolader. Als Folge erhöhter thermomechanischer Wechselbeanspruchungen (TMF) im Betrieb kommt es an den mechanisch und/oder thermisch höchst beanspruchten Stellen der Bauteile zur Bildung von Rissen, wodurch die Lebensdauer der Komponenten begrenzt wird. Derzeit werden bei Turboladern heißgehende Bauteile mit detektierten Rissen zumeist prophylaktisch ersetzt, da die weitere Ausbreitung der Risse während des Betriebs nicht vorhergesagt werden kann. Um diese aufwändige und un- ökonomische Praxis zu vermeiden, wurde im vorliegenden Forschungsvorhaben eine rechnerische Bewertungsmethode auf Basis der experimentellen und numerischen Bruchmechanik erarbeitet, mit deren Hilfe bereits in der Auslegungsphase oder während des Betriebs die (restliche) Lebensdauer der abgasführenden Komponenten vorhergesagt werden kann. Damit wird erstmalig die quantitative Vorhersage der Rissentwicklung bei TMF-Beanspruchungsbedingungen unter Berücksichtigung großer zyklischer viskoplastischer Verformungen ermöglicht.
Zentrales Ergebnis des Vorhabens ist eine automatisierte Berechnungsprozedur auf der Basis spezieller Finite-Elemente-Techniken (FEM), womit sowohl der Pfad als auch die Größe eines Risses als Funktion der Anzahl der Lastwechsel in Bauteilen unter TMF-Bedingungen berechnet werden kann. Als geeigneter Beanspruchungsparameter zur Bewertung des Rissfortschritts unter TMF wurde die zyklische Rissöffnungsverschiebung ΔCTOD verwendet. Das Werkstoffverhalten des betrachteten austenitischen Gusseisens Ni-Resist D-5S wurde mit einem validierten viskoplastischen, temperaturabhängigen Materialmodell modelliert, das zur Berücksichtigung große Verzerrungen und Rotationen am Riss erweitert wurde. Für die genaue Berechnung des ΔCTOD bei TMF wurden effiziente FEM-Techniken erarbeitet. Zur Simulation der Rissausbreitung wurde ein automatischer FEM-Algorithmus mit inkrementeller adaptiver Neuvernetzung entwickelt, bei dem die Verformungen und inelastischen Zustandsvariablen jeweils vom alten auf das neue Netz übertragen werden. Dieser Algorithmus wurde im Software-Paket ProCrackPlast implementiert, das in Verbindung mit dem kommerziellen FEM-Code Abaqus zur Lösung dreidimensionaler Rissprobleme zur Verfügung steht. Ziel der umfangreichen experimentellen Arbeiten war es, an isothermen LCF und anisothermen TMF-Versuchen mit gekerbten Flachzugproben (SENT) das Risswachstum im Temperaturbereich von 20 °C bis 700 °C zu ermitteln. Mit Hilfe begleitender 2D FEM Simulationen wurden anhand dieser Datenbasis die Rissfortschrittskurven des Werkstoffs unter Anwendung des ΔCTOD-Konzepts bestimmt und in geeigneter, parametrisierter Form den Nutzern zur Verfügung gestellt. Die Versuche an SENT-Proben wurden mit der entwickelten Software ProCrackPlast als 3D Modell simuliert. Der Vergleich der 2D und 3D Simulationen ergab einen systematischen Unterschied im CTOD und CTOD, der mit Hilfe eines Übertragungsfaktors korrigiert wurde. Der Vergleich der 3D Berechnungen mit den Experimenten zeigte eine zufriedenstellende Übereinstimmung der er- reichten Risslänge mit der Zahl der Lastzyklen im gesamten Temperaturbereich, wobei die numerische Prognose meist auf der konservativen / sicheren Seite lag. Die Übertragbarkeit der Ergebnisse der 2D Parameteridentifikation auf 3D Risskonfigurationen mit Mixed-Mode Beanspruchung ist mit zusätzlichen Versagenshypothesen verbunden, die aufgrund fehlender Versuchsdaten im Vorhaben nicht endgültig geklärt werden konnten. Zur Validierung des Gesamtkonzeptes wurden LCF-Proben mit einem bauteil- typischen Oberflächenriss experimentell und numerisch untersucht. In der Simulation konnte die komplexe Form und Größe der Rissentwicklung zufriedenstellend (richtig) vorhergesagt werden. Die Leis- tungsfähigkeit der erarbeiteten rechnerische Bewertungsmethode wurde an weiteren TMF-Beispielen vorgestellt und diskutiert. Die Software ProCrackPlast und die viskoplastische Materialroutine wurden dem Anwenderkreis des Vorhabens zusammen mit einem Nutzer-Handbuch und Verifikationsbeispielen zur Verfügung gestellt.
Das Ziel des Forschungsvorhabens ist erreicht worden.
The KupferDigital project aims to develop digital methods, tools, and data space infrastructures for digitalizing the entire life cycle of copper materials. The mechanical testing process is one of the main chains of such life cycles which generates lots of important testing data about the mechanical properties of the materials and their related materials and testing metadata. To train the digitalization of the mechanical testing process, different kinds of copper alloys were provided for this project, and their mechanical properties were measured by typical methods like Brinell and Vickers hardness and tensile testing. The primary raw testing data as well as the secondary datasets of these tests are provided. The detailed materials specifications, the utilized mechanical testing methods, and provided datasets are described in the content file. The test data files of heterogeneous structures are processed by the KupferDigital digital tools to be converted to standardized machine-readable data files.
We report about a joint project aiming at the digitalization of a lab course in materials testing. The undergraduate students were asked to prepare samples of a precipitation hardened aluminum alloy and characterize them using hardness and tensile tests. In a first step, we developed the frames for the digital labor notebook using eLabFTW. The primary data and the relevant metadata of each run were saved in a central database and made available for analysis and report issues. The whole set of results produced in a course was made available in the database. This database can be improved and serve as an open repository for data on this specific alloy.
The logical frame for the joint project was provided by the PMD Core Ontology (PMDco), a mid-level ontology that enables the representation and description of processes and process chains in an MSE-specific manner, ensuring full traceability of generated data. For the digitalization of this lab course, the tensile test ontology (TTO) was applied which is designed as a module of the PMDco using strongly related semantic concepts.
Das hochaktuelle Thema der Integration und Wiederverwendung von Wissen und Daten aus Herstellung, Bearbeitung und Charakterisierung von Materialien wird im Zuge der digitalen Transformation in der Materialwissenschaft und Werkstofftechnologie in verschiedenen Projekten adressiert. Dabei stehen die Interoperabilität von nach FAIR-Prinzipien erstellten und veröffentlichten Daten und Anwendungen im Vordergrund. Zur Umsetzung eines komplexen Datenmanagements sowie der Digitalisierung im Bereich der Materialwissenschaften etablieren sich Ontologien zunehmend als belastbares Werkzeug. Sie ermöglichen sowohl menschenlesbare als auch maschinenverständliche und -interpretierbare Wissensrepräsentationen durch semantische Konzeptualisierungen.
Im Rahmen des Projektes Plattform MaterialDigital (PMD, materialdigital.de) werden Ontologien verschiedener Ebenen entwickelt (verbindende mid-level sowie Domänen-Ontologien). Die PMD-Kernontologie (PMD Core Ontology - PMDco) ist eine Ontologie der mittleren Ebene), die Verbindungen zwischen spezifischeren MSE-Anwendungsontologien und domänenneutralen Konzepten herstellt, die in bereits etablierten Ontologien höherer Ebenen (top-level Ontology) verwendet werden. Sie stellt somit einen umfassenden Satz von durch Konsensbildung in der Gemeinschaft (geteiltes Vokabular) entstanden Bausteinen grundlegender Konzepte aus der Materialwissenschaft und Werkstofftechnik (MSE) dar. Das primäre Ziel des PMDco-Designs ist es, die Interoperabilität zwischen verschiedenen MSE-bezogenen und anderen Ontologien zu ermöglichen. Die PMDco dient als umfassend ausgelegte und erweiterbare semantische Zwischenschicht, die gemeinsame MSE-Konzepte durch semantisches Mapping auf andere Darstellungen vereinheitlicht, was sie zu einem effizienten Werkzeug zur Strukturierung von MSE-Wissen macht. In dieser Präsentation wird die Version 2.0 der PMDco vorgestellt.
Weiterhin wird eine auf die PMDco bezogene normenkonforme ontologische Repräsentation zur Speicherung und Weiterverarbeitung von Zugversuchsdaten präsentiert, die in enger Zusammenarbeit mit Standardisierungsgremien erstellt wurde. Dies umfasst den Weg von der Entwicklung einer Ontologie nach Norm, der Konvertierung von Daten aus Standardtests in das interoperable RDF-Format bis hin zur Verbindung von Ontologie und Daten. Letztendlich können die entsprechenden Daten in einem Triple Store abgelegt und abgefragt werden. Auf Basis dieser Zugversuchsontologie wurde im Folgenden unter Verwendung eines elektronischen Laborbuches (electonic lab notebook – ELN) zur Datenaufnahme eine Praktikumsreihe von Universitätsstudierenden digitalisiert. Dadurch wurde eine vollständig digital integrierte Versuchsführung ermöglicht, die auf andere Versuchsreihen und Experimente übertragbar ist und ebenfalls vorgestellt werden soll. Neben einer erleichterten Aufnahme, Analyse und (Wieder-)Verwendbarkeit von Daten wird damit eine Sensibilisierung von Studierenden für Datenstrukturierung sowie semantische Technologien im Sinne der Aus- und Weiterbildung erreicht.
Nickel-based alloys have been widely used for gas turbine blades owing to their excellent mechanical properties and corrosion resistance at high temperatures. The operating temperatures of modern gas turbines have been increased in pursuit of increased thermal efficiency. Turbine blades are exposed to these high temperatures combined with mechanical stresses, resulting in material damage through creep, fatigue, and other mechanisms. These turbine blades must be regularly inspected and replaced as needed, to prevent the loss of efficiency, breakdown, and catastrophic failure. Repair of the damaged turbine blades is often a more practical and cost-effective option than replacement, as replacement is associated with high costs and loss of material resources. To this end, state-of-the-art repair technologies including different additive manufacturing and brazing processes are considered to ensure efficient repair and optimum properties of repaired components.
In any repaired part, materials property-mismatches and/or inner defects may facilitate the crack initiation and propagation and thus reduce the number of load cycles to failure. Therefore, a fundamental understanding of the fatigue crack growth and fracture mechanisms in joining zones is required to enable the prediction of the remaining life of repaired components and to further improve and adapt the repair technologies.
Fatigue crack growth experiments have been conducted on SEN (Single Edge Notch) specimens joined via brazing, and pre-sintered Preform (PSP) and multi-materials (casted/printed) specimens layered via additive manufacturing (AM). The experiments were performed at 950 °C and various stress ratios. The crack growth was measured using DCPD (Direct Current Potential Drop) method. The stress intensity factors for joined SEN specimens were calculated using the finite element method and then used to derive the fatigue crack growth curves. Metallographic and fractographic analyses were conducted to get insight into the fracture mechanism.
Results show that the experimental technique for fatigue crack growth was successfully adapted and applied for testing joined specimens. Furthermore, the initial tests indicate that the investigated braze filler material provides a lower resistance to crack growth, and bonding defects cause a crack to deviate to the interface of the base material and joining zone. In AM-sandwich specimens, the crack growth rates are significantly reduced when the crack reaches the interface of printed material and casted material. The obtained crack growth data can be used to calibrate a crack growth model, which will further be utilized to predict the remaining life of repaired components.
The dataset provided in this repository comprises data obtained from a series of full-notch creep tests (FNCT) performed on selected high-density polyethylene (PE-HD) materials (for further details, see section 1 Materials in this document) in accordance with the corresponding standard ISO 16770.
The FNCT is one of the mechanical testing procedures used to characterize polymer materials with respect to their environmental stress cracking (ESC) behavior. It is widely applied for PE-HD materials, that are predominantly used for pipe and container applications. It is based on the determination of the time to failure for a test specimen under constant mechanical load in a well-defined and temperature controlled liquid environment. The test device used here also allows for continuous monitoring of applied force, specimen elongation and temperature.
Towards interoperability: Digital representation of a material specific characterization method
(2023)
Certain metallic materials gain better mechanical properties through controlled heat treatments. In age-hardenable aluminum alloys, the strengthening mechanism is based on the controlled formation of nanometer sized precipitates, which hinder dislocation movement. Analysis of the microstructure and especially the precipitates by transmission electron microscopy allows identification of precipitate types and orientations. Dark-field imaging is often used to image the precipitates and quantify their relevant dimensions.
The present work aims at the digital representation of this material-specific characterization method. Instead of a time-consuming, manual image analysis, a digital approach is demonstrated. The integration of an exemplary digital workflow for quantitative precipitation analysis into a data pipeline concept is presented. Here ontologies enable linking of contextual information to the resulting output data in a triplestore. Publishing digital workflow and ontologies ensures the reproducibility of the data. The semantic structure enables data sharing and reuse for other applications and purposes, demonstrating interoperability.