5 Werkstofftechnik
Filtern
Dokumenttyp
Sprache
- Englisch (345) (entfernen)
Referierte Publikation
- ja (345) (entfernen)
Schlagworte
- Additive manufacturing (20)
- EBSD (16)
- Additive Manufacturing (13)
- Microstructure (13)
- Corrosion (12)
- Residual stress (12)
- Transmission electron microscopy (12)
- Creep (10)
- Glass (9)
- Crystallization (8)
- Fatigue (7)
- Sintering (7)
- Steel (7)
- Aging (6)
- Carbon steel (6)
- High entropy alloy (6)
- High temperature corrosion (6)
- Mechanical properties (6)
- SEM (6)
- 3D printing (5)
- Bioactive glass (5)
- Degradation (5)
- Electron microscopy (5)
- High entropy alloys (5)
- Laser powder bed fusion (5)
- Metallic glasses (5)
- Neutron diffraction (5)
- Oxidation (5)
- Alumina (4)
- CALPHAD (4)
- Ceramics (4)
- EXAFS (4)
- Electron backscatter diffraction (4)
- Fracture (4)
- HIP (4)
- Impurities (4)
- Kikuchi patterns (4)
- Lattice parameters (4)
- Martensite (4)
- Metallic glass (4)
- Nanoindentation (4)
- Ontology (4)
- Plastic deformation (4)
- Plasticity (4)
- Scanning electron microscopy (4)
- Vickers indentation (4)
- X-ray diffraction (4)
- Zirconia (4)
- 3D-Printing (3)
- AISI 304L (3)
- AISI 316L (3)
- CCS (3)
- Calcination (3)
- Carbon fibres (3)
- Dislocation (3)
- Environmental stress cracking (ESC) (3)
- Finite element analysis (3)
- Fracture toughness (3)
- Full notch creep test (FNCT) (3)
- General Materials Science (3)
- Glass transition (3)
- Grain boundary (3)
- Hydrogen (3)
- Inconel 718 (3)
- Interfacial strength (3)
- Iron (3)
- Laser scanning microscopy (LSM) (3)
- Molecular dynamics (3)
- NMR spectroscopy (3)
- Nanoparticles (3)
- Nickel-based superalloys (3)
- Pattern matching (3)
- Phase-field simulation (3)
- Raman spectroscopy (3)
- Self-healing (3)
- Single crystal (3)
- Stress intensity factor (3)
- TEM (3)
- Thermal expansion (3)
- Ti-6Al-4V (3)
- ToF-SIMS (3)
- X-ray refraction (3)
- 3D-printing (2)
- AGIL (2)
- Alloy design (2)
- Aluminum alloys (2)
- Atom probe tomography (2)
- Bacteria (2)
- Binder jetting (2)
- Bioactivity (2)
- Bioceramics (2)
- Bone regeneration (2)
- Bulk metallic glasses (2)
- CCUS (2)
- Calcium cobaltite (2)
- Ceramic (2)
- Characterization (2)
- Compositionally complex alloys (2)
- Computed Tomography (2)
- Computed tomography (2)
- Condensate (2)
- Coulomb explosion (2)
- Crack growth (2)
- Crack healing (2)
- Crack propagation (2)
- Crop protection products (2)
- Crystal orientation (2)
- Crystal plasticity (2)
- Damage (2)
- Defects (2)
- Density-based Phase-Field Modelling (2)
- Densty-based Thermodynamics (2)
- Deuterium (2)
- Diffusion (2)
- Diopsid (2)
- Elastic constants (2)
- Environmental stress cracking (2)
- Foaming (2)
- Fracture mechanics (2)
- GFRP (2)
- Geothermal (2)
- Glass ceramic (2)
- Glass-ceramic (2)
- Gold (2)
- Grain boundaries (2)
- Heat treatment (2)
- High-density polyethylene (2)
- High-entropy alloy (2)
- High-temperature corrosion (2)
- IN718 (2)
- Infrared spectroscopy (2)
- Internal friction (2)
- Interphase (2)
- Kikuchi diffraction (2)
- Kikuchi pattern (2)
- LPBF (2)
- LTCC (2)
- Laser Powder Bed Fusion (2)
- Lattice distortion (2)
- Layerwise slurry deposition (2)
- Low cycle fatigue (2)
- Lunar regolith (2)
- Mars (2)
- Martensitic transformation (2)
- Mechanical Engineering (2)
- Mechanics of Materials (2)
- Microhardness (2)
- Microstrucrue Design (2)
- Microstructural characterization (2)
- Microstructure and texture (2)
- Microstructure evolution (2)
- Mobility (2)
- Modeling (2)
- Nanomaterials (2)
- Native oxide (2)
- Nickel alloys (2)
- Nickel-base superalloys (2)
- Orientation precision (2)
- Ostwald ripening (2)
- Oxyfuel (2)
- P92 (2)
- Permeability (2)
- Phase transformations (2)
- Phase-field (2)
- Polyethylene (2)
- Polymer (2)
- Preceramic polymer (2)
- Precipitation (2)
- Pressure-assisted sintering (2)
- Quasicrystal (2)
- Rapid solidification (2)
- Reaction-sintering (2)
- Relaxation (2)
- Reproducibility (2)
- S-Phase (2)
- SIMS (2)
- Sample preparation (2)
- Selective laser melting (2)
- Shape-memory alloys (2)
- Shear bands (2)
- Short-range order (2)
- Silicon carbide (2)
- Silicon nanowires (2)
- Single-crystals (2)
- Slow crack growth (SCG) (2)
- Sorption (2)
- Spray drying (2)
- Stress corrosion cracking (2)
- Stress relaxation (2)
- Sulfidation (2)
- Sulphidation (2)
- Superalloy (2)
- Superalloys (2)
- Superconducting magnet (2)
- Surface treatments (2)
- Tempered martensite-ferritic steel (2)
- Tensile properties (2)
- Texture (2)
- Thermodynamics (2)
- Thermoelectric properties (2)
- Thermography (2)
- Toughness (2)
- Transmission electron microscopy (TEM) (2)
- Viscosity (2)
- Water content (2)
- Water speciation (2)
- Wetting (2)
- X-ray absorption spectroscopy (2)
- X-ray computed tomography (CT) (2)
- 12%Cr steel (1)
- 316L (1)
- 316L stainless steel (1)
- 3D etching (1)
- 3D-finite element modeling (1)
- 4-Dimensional scanning transmission (1)
- 9-12%Cr steel (1)
- Abrasion (1)
- Accelerated temporal integration (1)
- Advanced high strength steels (1)
- Ageing (1)
- Aggressive environments (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Al-Cu binary alloy system (1)
- Al-Cu-Li-alloy (1)
- Al2O3 (1)
- Alcium alkali phosphate (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alloy (1)
- Alloy Safety (1)
- Alloy microstructure (1)
- Alloys (1)
- Alloys' Safety (1)
- Alumina coatings (1)
- Aluminium alloys (1)
- Aluminosilicate glasses (1)
- Aluminum Alloy Aging (1)
- Aluminum alloy (1)
- Amorphization (1)
- Analytical scanning electron microscopy (1)
- Angle measurement (1)
- Approximant (1)
- Aquifer fluid (1)
- Artificial weathering (1)
- Atomistic Simulation (1)
- Atomistic simulations (1)
- Austenite-to-martensite phase transformation (1)
- Austenitic alloys (1)
- Austenitic stainless steel (1)
- Austenitic steel 316L (1)
- Automated Bragg angle determination (1)
- Automated analysis (1)
- Automated image analysis (1)
- BTEX (1)
- Bacterial attachment (1)
- Batch reactions (1)
- Behmite (1)
- Biaxial strength (1)
- Bimodal distribution (1)
- Binder Jetting (1)
- Binders/binding (1)
- Bio Ceramic (1)
- Bio Ceramics (1)
- Bio active ceramic (1)
- Bioactive Glass (1)
- Bioactive bone grafting material (1)
- Bioactive glass scaffold (1)
- Biodiesel (1)
- Biogeochemical cycling (1)
- Biogeochemistry (1)
- Biomineralisation (1)
- Biopolymer (1)
- Biphasic calcium phosphate (1)
- Bitter technique (1)
- Bone marrow-derived mesenchymal stem cell (1)
- Borate (1)
- Borosilicate glass (1)
- Bragg angles (1)
- Brass (1)
- Bravais lattice (1)
- Bravais lattices (1)
- Brinell hardness (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bubble formation (1)
- Burst (1)
- C. lap-shear (1)
- CALPHAD database analysis (1)
- CCUS, supercritical/dense phase CO2, carbon steels, martensitic steel, superaustenite steel, droplet corrosion (1)
- CFRP (1)
- CO2 (1)
- CO2 corrosion (1)
- CO2 pipeline transport (1)
- CO2 quality (1)
- CO2 separation membranes (1)
- Calcium Cobaltite (1)
- Calcium alkali orthophosphate materials (1)
- Calculated intrinsic fracture toughness (1)
- Carbide phase NbC (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon Fibre (1)
- Carbon capture (1)
- Carbon capture and storage (1)
- Carbon capture storage (1)
- Carbon capture, utilization and storage technology (1)
- Carbon dioxide (1)
- Carbon nanotubes (1)
- Casing (1)
- Cavitation (1)
- Cellular substructure (1)
- Cellulose (1)
- Cement (1)
- Cement-based materials (1)
- Ceramic multilayers (1)
- Cerium oxide (1)
- Chalcogenides (1)
- Characterisation (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Chemometrics (1)
- Chrystal orientation (1)
- Clay ISRU (1)
- Co-firings (1)
- Coating (1)
- Cobald based alloy (1)
- Coefficient of thermal expansion (1)
- Composite recycling (1)
- Compositionally complex alloy (1)
- Concrete (1)
- Condensed Matter Physics (1)
- Confined catalyst (1)
- Contact angle (1)
- Contact fatigue (1)
- Contact mechanics (1)
- Continnum damage model (1)
- Cooling rate (1)
- Coordinate measurement machine (1)
- Copper vacancies (1)
- Corrosion costs (1)
- Corrosion fatigue (1)
- Corrosion pits (1)
- Corrosion protection (1)
- Corrosion resistance (1)
- CrCoNi (1)
- CrMnFeCoNi (1)
- CrN/NbN (1)
- Crack arrest (1)
- Crack evolution (1)
- Crack growth in air (1)
- Crack initiation (1)
- Crack opening displacement (1)
- Crack tip opening displacement (1)
- Cracks (1)
- Craze-crack mechanism (1)
- Craze–crack mechanism (1)
- Creation-relaxation algorithm (1)
- Creep behavior (1)
- Creep mechanisms (1)
- Creep strength (1)
- Creep under thermal cycling (1)
- Creep-fatigue (1)
- Creep-fatigue interaction (1)
- Cross-sectioning (1)
- Crosslinking (1)
- Cryogenic (1)
- Cryogenic cycling (1)
- Crystal Texture (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice period (1)
- Crystal morphology (1)
- Crystalline defects (1)
- Crystallographic texture (1)
- Cupriavidus metallidurans (1)
- Cuttlefish (1)
- Cyclic softening (1)
- Cyclic steam oxidation (1)
- Cytocompatibility (1)
- D. aging (1)
- D. creep D. viscoelasticity (1)
- DCB (1)
- DCB geometry (1)
- Data Interoperability (1)
- Data analysis (1)
- Data infrastructures (1)
- Data mapping (1)
- Data processing (1)
- Debinding (1)
- Debonding (1)
- Deep Learning (1)
- Defect population (1)
- Defects engineering (1)
- Deformation (1)
- Deformation mechanisms (1)
- Degradation signatures (1)
- Density-based Thermodynamics (1)
- Density-based model (1)
- Dental (1)
- Deposition microstructure (1)
- Desorption (1)
- Destabilization (1)
- Dielectric breakdown (1)
- Dielectric properties (1)
- Diesel (1)
- Diesel Fuel (1)
- Differential scanning calorimetry (1)
- Differential scanning calorimetry (DSC) (1)
- Diffraction (1)
- Diffraction Enhanced Imaging (1)
- Diffraction contrast (1)
- Digital image correlation (1)
- Digital representations (1)
- Digital workflows (1)
- Digitalization (1)
- Dimensional mismatch of crystalline lattice periods (misfit) (1)
- Directional grain growth (1)
- Dislocation avalanches (1)
- Disorientation (1)
- Distributed fiber optic sensing (1)
- Domain Ontology Development (1)
- Double notched creep specimen (1)
- Dry preparation (1)
- Drywood termite (1)
- Ductile iron (1)
- Dwell periods (1)
- Dwell times (1)
- Dynamic recrystallization (1)
- EFTEM (1)
- EN AW-2618A (1)
- Early oxidation (1)
- Early stages (1)
- Early sulfidation (1)
- Efficiency (1)
- Elastic energy (1)
- Elastic microstructure (1)
- Elastic modulus (1)
- Elastic properties (1)
- Elasticity (1)
- Electric conductivity (1)
- Electrical insulators (1)
- Electrical resistance (1)
- Electrochemical characterisation (1)
- Electrochemical impedance spectroscopy (1)
- Electron back-scattered diffraction (1)
- Electron backscattered diffraction (1)
- Electron beam-induced charging (1)
- Electron beam-induced fragmentation (1)
- Electron diffraction (1)
- Electron energy (1)
- Electron microscopy, transmission (1)
- Electronic (1)
- End of life (1)
- Endothelial progenitor cell (1)
- Energy distribution (1)
- Environment (1)
- Environmental Stress Cracking (1)
- Environmentally assisted cracking (1)
- Epitaxial films (1)
- Epoxy (1)
- Epoxy Resin (1)
- Epoxy resin (1)
- Equilibrium relaxation (1)
- Eutectic (1)
- Expanding cavity model (1)
- Experimental and numerical techniques (1)
- Explosive welding (1)
- Exposed metal sites (1)
- FAIR (1)
- FAIR Data Management (1)
- FAIR research data management (1)
- FIB Tomography (1)
- FSDC (1)
- Fabrication (1)
- Faceting (1)
- Facilitated activation (1)
- Failure mechanisms (1)
- Failure rate (1)
- Fatigue Testing (1)
- Fatigue crack propagation stages (1)
- Fatigue damage (1)
- Fatigue performance (1)
- Fe-Mn steels (1)
- Femtosecond laser (1)
- Ferritic steels (1)
- Ferritic–martensitic steel (1)
- Ferrous phosphate hydrate (1)
- Fiber-matrix interface (1)
- Fiber/matrix bond (1)
- Fibre reinforced plastic (1)
- Fibre/matrix bond (1)
- Fibre/matrix bonding (1)
- Filters (1)
- Finite element method (1)
- Finland (1)
- Firing (1)
- First derivative (1)
- Flowability (1)
- Four-point bending test (1)
- Fourier series (1)
- Fractography (1)
- Fracture surface analysis (1)
- Fracture surface energy (1)
- Fracture surfaces (1)
- Freeze casting (1)
- Fresnoite (1)
- Friction (1)
- Friction Stir Welding (1)
- Friction stir processing (1)
- Frozen state photopolymerization (1)
- Fuel sorption (1)
- Full Notch Creep Test (1)
- Full notch creep test (1)
- Fullerite (1)
- Fungi (1)
- GD-OES (1)
- GMR (1)
- GMR sensors (1)
- General Computer Science (1)
- General Engineering (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass fiber reinforced polymers (1)
- Glass fiber-epoxy composites (1)
- Glass fibre (1)
- Glass forming (1)
- Glass forming melts (1)
- Glass manufacturing (1)
- Glass powder (1)
- Glass-ceramics (1)
- Glass-ceramics definition (1)
- Global stability criterion (1)
- Gnomonic projections (1)
- Grade S960QL steel (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Corrosion (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary engineering (1)
- Grain boundary oxidation (1)
- Grain boundary phase diagram (1)
- Grain boundary precipitates (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Grain structure (1)
- Granules (1)
- Graphite (1)
- Growth kinetics (1)
- Growth rate (1)
- Hausner ratio (1)
- Heat accumulation (1)
- Heat-resistant nickel alloys (1)
- Hertzian cracks (1)
- Hierarchical microstructure (1)
- Hierarchical microstructure Premartensite (1)
- Hierarchical porosities (1)
- High - temperature (1)
- High Entropy Alloy (1)
- High Entropy Alloys (1)
- High alloyed steel (1)
- High density polyethylene (1)
- High interstitial austenitic steel (1)
- High pressure (1)
- High temperature nickel-based eutectic alloys (1)
- High temperature oxidation (1)
- High temperatures (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- High-strength steel (1)
- High-temperature oxidation (1)
- High-temperature properties (1)
- High-voltage testing (1)
- High‐temperature corrosion (1)
- Hipims (1)
- Homogenization (1)
- Hot pressing (1)
- Hot stage microscopy (1)
- Hydrogel (1)
- Hydrogen diffusivity (1)
- Hydrogen storage (1)
- Hydrothermal Ageging (1)
- Hydrous glass (1)
- Hygrothermal (1)
- IASCC (1)
- IN 718 (1)
- ISRU (1)
- Impact damage (1)
- Impact wear (1)
- In situ diffraction (1)
- In situ tensile test (1)
- In situ thermal-annealing experiment (1)
- In-situ ED-XRD (1)
- In-situ Process Monitoring (1)
- In-situ SEM micro shear deformation (1)
- In-situ composites (1)
- In-situ diffraction (1)
- In-situ process monitoring (1)
- In-vivo (1)
- Incipient plasticity (1)
- Inclusion cluster (1)
- Inclusion size (1)
- Inconel 625 (1)
- Inconel 686 (1)
- Incremental lifetime models (1)
- Indentation (1)
- Indentation fracture toughness (1)
- Industrial and Manufacturing Engineering (1)
- Infrared nano AFM (1)
- Inkjet (1)
- Inter layer time (1)
- Interdiffusion (1)
- Interfacial Strength (1)
- Interfacial anisotropy (1)
- Interfacial free energy (1)
- Interfacial shear strength (1)
- Interlaboratory comparability (1)
- Intermetallic (1)
- Intermittent microplasticity (1)
- Intermodulation AFM (1)
- Internal Sulfidation (1)
- Internal Surfaces (1)
- Internal oxidation (1)
- Internal stresses (1)
- Intrinsic stress (1)
- Invar (1)
- Ion beam erosion Sectioning (1)
- Ionic porosity (1)
- Iron meteorite (1)
- Irradiation (1)
- JMAK model (1)
- Joints/joining (1)
- KCl (1)
- KI (1)
- Kernel average misorientation (1)
- Keywords: Poly(ether ether ketone) (1)
- Kikuchi bands (1)
- Knowledge Graph (1)
- Knowledge Representation (1)
- Knowledge graphs (1)
- Knowledge representation (1)
- LIBS (1)
- LSD print (1)
- Laboratory X-ray diffraction (1)
- Laser (1)
- Laser Powder Bed Fusion (LPBF) (1)
- Laser ablation in liquid (1)
- Laser beam melting (1)
- Laser beam melting (LBM) (1)
- Laser cladding (1)
- Laser powder-based directed energy deposition (1)
- Lattice distortions (1)
- Lattice misfit (1)
- Lattice parameter determination (1)
- Lattice point density (1)
- Lattice rotation (1)
- Lattice structures (1)
- Laves phase (1)
- Layered manganese oxide (1)
- Layering misalignment (1)
- Li-ion battery (1)
- Light curing (1)
- Lindemann criterion (1)
- Linear elastic fracture mechanics (1)
- Linked open data (1)
- Liquid Metal Embrittlement (1)
- Liquid metal embrittlement (1)
- Liquid phase sintering (1)
- Liquid-metal embrittlement (1)
- Log-normal distribution (1)
- Long-term aging (1)
- Long-term calculation (1)
- Long-term storage (1)
- Lorenz transmission electron microscopy (1)
- Low carbon steel (1)
- Low expansion (1)
- Low strain (1)
- Low-cycle fatigue (1)
- Low-loading (1)
- MGS-1 regolith simulant (1)
- MOF-74 (1)
- MOUSE (1)
- Machine Learning (1)
- Machine learning (1)
- Magmatic and hydrothermal processes (1)
- Magnetic domain distribution (1)
- Magnetic shape memory (1)
- Magnetic stray field (1)
- Magnetic stray fields (1)
- Magnetomechanical effect (1)
- Martensitic steels (1)
- Martensitic structure (1)
- Mass transport (1)
- Master curve (1)
- Material degradation (1)
- Material failure (1)
- Material modeling (1)
- Materials Modelling (1)
- Materials Testing (1)
- Materials informatics (1)
- Materials science (1)
- Materials science and engineering (1)
- Matrix residual stress (1)
- Mean atomic number (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical deformation (1)
- Medium Entropy Alloys (1)
- Medium entropy alloys (1)
- Melt pool boundary (1)
- Melting (1)
- Meta material (1)
- Metal Magnetic Memory (1)
- Metal additive manufacturing (1)
- Metal and alloys (1)
- Metal magnetic memory (1)
- Metallic Glass (1)
- Metallic materials (1)
- Methodology (1)
- Micro-shrinkages (1)
- Microplastic stress (1)
- Microplastics (1)
- Microspine (1)
- Microstructur (1)
- Microstructural changes of a Fe Si alloy (1)
- Microstructural evolution (1)
- Microstructure Design (1)
- Microstructure, γ/γ' misfit (1)
- Microwave technology (1)
- Milling (1)
- Miniature specimens (1)
- Mis-match (1)
- Misfitting precipitate (1)
- Misorientation (1)
- Mixed Ca-K-Na phosphates (1)
- Mixed conductors (1)
- Mixed-linkers (1)
- Mn-oxides (1)
- Model (1)
- Moisture (1)
- Molten salt (1)
- Moon (1)
- Multiaxial deformation (1)
- Multilayer (1)
- Multilayer ceramic technology (1)
- Multilayers (1)
- Multiple cracks (1)
- NGS (1)
- Na and K rhenanites (1)
- Nano-composite (1)
- Nano-powder (1)
- Nano-scratch test (1)
- Nanocomposites (1)
- Nanocrystalline alloys (1)
- Nanocrystalline structure (1)
- Nanoelectromechanical systems (NEMS) (1)
- Nanoparticle structure (1)
- Nanopowder (1)
- Nanoribbons (1)
- Nanoscale multilayers (1)
- Nanostructure quantification (1)
- Natural (1)
- Natural silver wires (1)
- Nb3Sn (1)
- Near Infrared Spectroscopy (1)
- Neutron Diffraction (1)
- NiMaGa (1)
- NiTi (1)
- Nickel-base alloy (1)
- Niobium alloying (1)
- Nitride (1)
- Non-destructive Materials (1)
- Non-metallic inclusions (1)
- Non-serrated inhomogeneous flow (1)
- Notch (1)
- Nucleation (1)
- Number density (1)
- Nydrogen melting (1)
- Online Process Monitoring (1)
- Ontologies (1)
- Optical and Magnetic Materials (1)
- Optical centrifugation (1)
- Optical criterion of brittleness (1)
- Optical tweezers (1)
- Ordered/disordered structures (1)
- Ordering (1)
- Orientation (1)
- Orientation refinement (1)
- Orientation relationship (1)
- Orowan Mechanism (1)
- Osteogenesis (1)
- Oxidation protection (1)
- Oxide (1)
- Oxide coatings (1)
- Oxygen evolution reaction (1)
- PBF-LB/M/316L (1)
- PE-HD Sorption (1)
- PLS-DA (1)
- PV modules (1)
- Packaging (1)
- Parabolic flight (1)
- Parametric modeling (1)
- Particle morphology (1)
- Particle size (1)
- Passive components and circuits (1)
- Permittivity reduction (1)
- Phase Diagram (1)
- Phase diagram (1)
- Phase field crystal (1)
- Phase field method (1)
- Phase field model (1)
- Phase separation (1)
- Phase stability (1)
- Phase transformation (1)
- Phase-Field Simulations (1)
- Phase-field model (1)
- Phase-field modelling (1)
- Phosphate (1)
- Photocleavable organosilanes (1)
- Photopolymer composites (1)
- Phototrophs (1)
- Photovoltaic modules (1)
- Physical aging (1)
- Pipeline (1)
- Pipeline network (1)
- Pitting (1)
- Pitting corrosion (1)
- Plasma imaging (1)
- Plasma nanocoatings (1)
- Plasma spray (1)
- Plasmon enhancement (1)
- Platinum-group-metals (1)
- Polymer analysis/characterization (1)
- Polymer composite (1)
- Polymer-matrix composites (PMC) (1)
- Polymeric Materials (1)
- Polymer–matrix composites (1)
- Polyolefins (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethane (1)
- Porcelain (1)
- Pore (1)
- Pores (1)
- Porosification (1)
- Porosity (1)
- Porous materials (1)
- Positron annihilation spectroscopy (1)
- Powder bed additive manufacturing (1)
- Powder diffraction (1)
- Powder flow (1)
- Powder processing (1)
- Powder rheology (1)
- Power factor (1)
- Power law (1)
- Precipitate shape (1)
- Pressure assisted sintering (1)
- Preventive strategies (1)
- Principal stress (1)
- Principal stress components (1)
- Printing (1)
- Process development (1)
- Processing window (1)
- Production scatter (1)
- Projection center (1)
- Projekt AGIL - Alterung additiv gefertigter metallischer Materialien und Komponenten (1)
- Properties (1)
- Pseudosymmetry (1)
- Pultruded fiber rods (1)
- Radon transform (1)
- Reaction Sintering (1)
- Real-time deformation (1)
- Real-time qPCR (1)
- Recommendations (1)
- Recycling (1)
- Reference data (1)
- Refractory alloy (1)
- Refractory high entropy alloys (1)
- Refractory superalloys (1)
- Regolith (1)
- Reheating (1)
- Rejuvenation (1)
- Relaxation fatigue (1)
- Residual Stress (1)
- Residual Stresses (1)
- Residual strains (1)
- Residual stresses (1)
- Resistance spot welding (1)
- Resonance testing (1)
- Review (1)
- Roughness (1)
- Round Robin (1)
- S-phase (1)
- SDC (1)
- SEM micrography (1)
- SLM (1)
- SO2 (1)
- STEM (1)
- Safety (1)
- Safety assessment (1)
- Samarium doped ceria (1)
- Sample holder (1)
- Sand blasting (1)
- Sandwich (1)
- Scaffold geometry (1)
- Scaffolds (1)
- Scale-dependent behavior (1)
- Scan strategies (1)
- Scanning acoustic microscopy (SAM) (1)
- Scanning transmission electron microscopy (STEM) (1)
- Scarf joint (1)
- Scavenging effect of iron (1)
- Scratches (1)
- Segregation (1)
- Segregation engineering (1)
- Selective Laser Melting (1)
- Selective laser melting (SLM) (1)
- Self-Assembly (1)
- Self-organization (1)
- Semantic Data Integration (1)
- Semantic Interoperability (1)
- Semantic Web Technologies (1)
- Semantic data integration (1)
- Semantic interoperability (1)
- Semantic web (1)
- Shadowgraphy (1)
- Shape memory alloy (1)
- Shape memory alloys (1)
- Shear (1)
- Shear load (1)
- Shear modulus (1)
- Shear strain (1)
- Shear testing (1)
- Shear thinning (1)
- Shear-band cavitation (1)
- Shear-band structure (1)
- Short range order (1)
- Short-beam strength (1)
- Silicate glass (1)
- Silicate glass-ceramics (1)
- Silicoborate glasses (1)
- Silicon Carbide (1)
- Silicon release (1)
- Silver metallization paste (1)
- Simulation (1)
- Simulation of concrete (1)
- Single crystal Ni-Base superalloys (1)
- Single fiber pull-out test (1)
- Single-Crystal (1)
- Sintering additive (1)
- Sinus floor augmentation (1)
- Size effect (1)
- Slip localization (1)
- Slow crack growth (1)
- Slurry optimization (1)
- Small-angle scattering (1)
- Small-scale (1)
- Smart materials (1)
- Smectite (1)
- Soda lime silicate glass (1)
- Soda-lime silicate glass (1)
- Soda-lime-silica (1)
- Soda-lime-silica glass (1)
- Sodium ion batteries (1)
- Softening temperature (1)
- Soil (1)
- Sol-gel coating (1)
- Solar panels (1)
- Solid-State-Synthesis (1)
- Solid-state-synthesis (1)
- Solubility (1)
- Space (1)
- Spar cap design (1)
- Specimen geometry (1)
- Spinodal decomposition (1)
- Split-vacancy defect complexes (1)
- Stable crack growth (1)
- Stainless steel (1)
- Standardisation (1)
- Statistics (1)
- Steam oxidation resistance (1)
- Steel P92 (1)
- Steel alloy (1)
- Steels (1)
- Stereoscopy (1)
- Strain (1)
- Strain difference (1)
- Strain energy (1)
- Strength (1)
- Stress distribution (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural composites (1)
- Structural defects (1)
- Structural dynamics (1)
- Structural health monitoring (1)
- Structural steel (1)
- Subcritical crack growth (1)
- Sulfiding (1)
- Superalloy single crystals (1)
- Supersaturation (1)
- Support configurations (1)
- Support vector machines (1)
- Surface crystallization (1)
- Surface elasticity (1)
- Surface energy (1)
- Surface modification (1)
- Surface nucleation (1)
- Surface roughness (1)
- Surface stress (1)
- Swept wavelength interferometry (1)
- Symmetric dwell periods (1)
- Synchrotron X-ray diffraction (1)
- Synchrotron micro-tomography (1)
- Synchrotron radiations (1)
- Synthesis (1)
- T1 precipitate (1)
- TIG-welding (1)
- Temperature dependence (1)
- Tensile Test Ontology (1)
- Tensile strength (1)
- Tensile testing (1)
- Tensile tests (1)
- Tetragonal distortion (1)
- Tetragonality (1)
- Thermal Cycling (1)
- Thermal cycling (1)
- Thermal desorption mass spectrometry (1)
- Thermo-mechanical loading (1)
- Thermobimetal (1)
- Thermoelectric oxide (1)
- Thermoelectric oxides (1)
- Thermoelectrics (1)
- Thermomechanical fatigue (1)
- Thermoplastic (1)
- Thermoplastic forming (1)
- Thermoplastic matrix (1)
- Thermoplastic prepreg (1)
- Thermoset composition (1)
- Thermosetting resin (1)
- Thickening (1)
- Thin films (1)
- Thiol-ene click chemistry (1)
- Three-dimensional Bone tissue engineering (1)
- Three-dimensional tomographies (1)
- Titanium (1)
- Titanium oxide (1)
- Topography (1)
- Transformer (1)
- Transmission Kikuchi diffraction (1)
- Transmission electron microscope (TEM) (1)
- Transmittance (1)
- Transparency (1)
- Transparent ceramic (1)
- Tribology (1)
- Tricalcium Phosphate (1)
- Triply Periodical Minimal Surface (1)
- Tungsten carbide (1)
- Tungsten-Rhenium (1)
- Turbine disk (1)
- Twinning (1)
- Two-photon-polymerization (1)
- UV-irradiation (1)
- Ultrasonic assited machining (1)
- Ultrasound (1)
- Under cyclic loading (1)
- Unidirectional composites (1)
- Upconversion (1)
- Utilization, and storage (CCUS) technology (1)
- Vickers hardness (1)
- Viscoelastic model (1)
- Viscoplasticity (1)
- Viscous sintering (1)
- Visual ontology development (1)
- Visualization (1)
- Vivianite (1)
- Vocabulary providers (1)
- Volatiles from thermosets (1)
- Volume changes (1)
- Volume fraction (1)
- Volume specific surface area (1)
- WAXS (1)
- Water (1)
- Water Diffusion (1)
- Water droplet erosion resistance (1)
- Water in glass (1)
- Weibull distribution (1)
- Welding (1)
- Wet chemical etching (1)
- Whole-chain CCS scenario (1)
- Work of adhesion (1)
- X-ray Diffraction (1)
- X-ray diffraction analysis (1)
- X-ray tomographic (1)
- X-ray-diffraction (1)
- XPCS (1)
- XRD (1)
- Young's modulus (1)
- Young`s modulus (1)
- Young´s modulus (1)
- Yttria stabilized zirconia (1)
- Zinc oxide (1)
- Zirconia-toughened alumina (1)
- ZnO (1)
- arbidic austempered ductile iron (1)
- battery aging mechanism (1)
- current collector corrosion (1)
- depth profiles (1)
- electron microscopy (1)
- high pressure (1)
- in-situ synthesis (1)
- infrared spectroscopy (1)
- microstructural changes (1)
- negative crystal growth (1)
- phosphate glasses (1)
- water speciation (1)
- µ-gravity (1)
- γ/γ' matrix (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (345) (entfernen)
Paper des Monats
- ja (11)
Upconverting nanoparticles are essential in modern photonics due to their ability to convert infrared light to visible light. Despite their significance, they exhibit limited brightness, a key drawback that can be addressed by combining them with plasmonic nanoparticles. Plasmon-enhanced upconversion has been widely demonstrated in dry environments, where upconverting nanoparticles are immobilized, but constitutes a challenge in liquid media where Brownian motion competes against immobilization.
This study employs optical tweezers for the three-dimensional manipulation of an individual upconverting nanoparticle, enabling the exploration of plasmon-enhanced upconversion luminescence in water. Contrary to expectation, experiments reveal a long-range (micrometer scale) and moderate (20%) enhancement in upconversion luminescence due to the plasmonic resonances of gold nanostructures. Comparison between experiments and numerical simulations evidences the key role of Brownian motion. It is demonstrated how the three-dimensional Brownian fluctuations of the upconverting nanoparticle lead to an “average effect” that explains the magnitude and spatial extension of luminescence enhancement.
Modern dry pressing of ceramic powders using spray‐dried granulates cannot avoid the occurrence of defects related to persisting inter‐ and intra‐granulate interstitial voids. These constitute the parent defect size population limiting the application of polycrystalline ceramics in high‐stress conditions. The mitigation of such defects could widen the range of application in technical and biomedical engineering, reduce the safety range for design, and extend the lifetime of components. Herein, the Weibull size‐effect on strength in size‐partitioned Yttria‐stabilized zirconias (YSZ) feedstocks is used to explore the viability of changing the density distribution of granulate sizes as an effective strategy to obtain a denser particle packing that could reduce the size distribution of strength‐limiting pressing defects. In a direct assessment of critical defect size using multiscale strength testing with a dataset of ≈1300 values, the success of such an approach in increasing the strength reliability for small volume components is demonstrated, along with its ultimate failure in altering the defect size distribution in sintered YSZ ceramics across several length scales. Finally, it is shown that granule morphology (spherical or dimpled) fails to affect the defect density and size distribution in YSZ ceramics.
Self-healing polymers have been developed to improve durability and reduce costs associated with maintenance during service. The addition of thermoplastics to thermosets to produce mendable polymers appears as a promising selfhealing technique. In this study, poly (ethylene-co-methacrylic acid) (EMAA) was added to epoxy resin and the effects of EMAA addition on epoxy properties were evaluated. Specimens with two different contents of thermoplastic and particles sizes were manufactured. A two-level full factorial experimental design was used to evaluate the effect of particle size and particle content on properties of epoxy modified with addition of EMAA. Tensile tests and dynamic mechanical analysis (DMA) were used and the evaluated responses were tensile strength, modulus of elasticity, and glass transition temperature (Tg). X-ray computed tomography (XCT) was used to investigate particle size and concentration after manufacturing. It was found that the particle concentration has greater effects on stress–strain behavior of epoxy while Tg was not significantly affected by neither of the analyzed entrance variables.
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
Advancements in bulk metallic glass thermoplastic forming unleash the potential to fabricate microscale metallic features with unparalleled precision and durability, i.e. microspine gripping structures for mobility platforms on planetary or in-space robots. Four designs of grippers were fabricated and rigorously tested. Coefficient of friction on four test surfaces were measured and compared to SiC paper and Velcro. The hardness and elasticity of the bulk metallic glasses make them a game-changer in the field, offering a superior alternative to conventional nonmetallic grippers.
An interlaboratory study, involving eigth international laboratories and coordinated by COMTES FHT (Czech Republic), was conducted to validate tensile measurements obtained using miniature specimens on additively manufactured (AM) components and artifacts. In addition to AM 316L stainless steel (316L SS), a wrought highstrength steel (34CrNiMo6V, equivalent to AISI 4340) was also used. Based on the results, a precision statement in accordance with ASTM E691 standard practice was developed, intended for inclusion in a proposed annex to the ASTM E8/E8M tension testing method. The primary outcomes of the study highlighted the agreement between yield and tensile strength measured from miniature and standard-sized tensile specimens. Furthermore, most tensile properties exhibited similar standard deviations, offering users insight into the efficacy of miniature specimen applications.
A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO.
High‐temperature KCl‐induced corrosion of high Cr and Ni alloys investigated by in‐situ diffraction
(2024)
High‐temperature KCl‐induced corrosion in laboratory air was observed in situ utilizing X‐ray diffraction. High Cr‐containing model alloys (Fe‐13Cr, Fe‐18Cr‐12Ni, and Fe‐25Cr‐20Ni) were coated with KCl and exposed to dry air at 560°C. KCl‐free alloys were studied in the equivalent atmosphere as a reference. After exposure to KCl‐free environments, all alloys showed the formation of very thin oxide layers, indicating good corrosion resistance. In contrast, KCl‐bearing alloys showed distinct damage after exposure.
Additive manufacturing of metals – and in particular building with laser-based powder bed fusion – is highly flexible and allows high-resolution features and feedstock savings. Meanwhile, though space stations in low Earth orbit are established, a set of visits to the Moon have been performed, and humankind can send out rovers to explore Venus and Mars, none of these milestone missions is equipped with technology to manufacture functional metallic parts or tools in space. In order to advance space exploration to long-term missions beyond low Earth orbit, it will be crucial to develop and employ technology for in-space manufacturing (ISM) and in-situ resource utilisation (ISRU). To use the advantages of laser-based powder bed fusion in these endeavours, the challenge of powder handling in microgravity must be met. Here we present a device capable of building parts using metallic powders in microgravity. This was proven on several sounding rocket flights, on which occasions Zr-based metallic glass parts produced by additive manufacturing in space were built. The findings of this work demonstrate that building parts using powder feedstock, which is more compact to transport into space than wire, is possible in microgravity environments. This thus significantly advances ISRU and ISM and paves the way for future tests in prolonged microgravity settings.
Objectives
The aim of the study was to investigate the impact of organic additives (binder, plasticizer, and the cross-linking ink) in the formulation of water-based feedstocks on the properties of a dental feldspathic glass-ceramic material developed for the slurry-based additive manufacturing technology “LSD-print.”
Material and methods
Three water-based feldspathic feedstocks were produced to study the effects of polyvinyl alcohol (AC1) and poly (sodium 4-styrenesulfonate) (AC2) as binder systems. A feedstock without organic additives was tested as the control group (CG). Disc-shaped (n = 15) and bar (n = 7) specimens were slip-cast and characterized in the green and fired states. In the green state, density and flexural strength were measured. In the fired state, density, shrinkage, flexural strength (FS), Weibull modulus, fracture toughness (KIC), Martens parameters, and microstructure were analyzed. Disc-shaped and bar specimens were also cut from commercially available CAD/CAM blocks and used as a target reference (TR) for the fired state.
Results
In the green state, CG showed the highest bulk density but the lowest FS, while the highest FS in the green state was achieved with the addition of a cross-linking ink. After firing, no significant differences in density and a similar microstructure were observed for all slip-cast groups, indicating that almost complete densification could be achieved. The CAD/CAM specimens showed the highest mean FS, Weibull modulus, and KIC, with significant differences between some of the slip-cast groups.
Significance
These results suggest that the investigated feedstocks are promising candidates for the slurry-based additive manufacturing of restorations meeting the class 1a requirements according to DIN EN ISO 6871:2019–01.
In this work we instigated the fragmentation of Au microparticles supported on a thin amorphous carbon film by irradiating them with a gradually convergent electron beam inside the Transmission Electron Microscope. This phenomenon has been generically labeled as ‘‘electron beam-induced fragmentation’’ or EBIF and its physical origin remains contested. On the one hand, EBIF has been primarily characterized as a consequence of beam-induced heating. On the other, EBIF has been attributed to beam-induced charging eventually leading to Coulomb explosion. To test the feasibility of the charging framework for EBIF, we instigated the fragmentation of Au particles under two different experimental conditions. First, with the magnetic objective lens of the microscope operating at full capacity, i.e. background magnetic field 𝐵 = 2 T, and with the magnetic objective lens switched off (Lorenz mode), i.e. 𝐵 = 0 T. We observe that the presence or absence of the magnetic field noticeably affects the critical current density at which EBIF occurs. This strongly suggests that magnetic field effects play a crucial role in instigating EBIF on the microparticles. The dependence of the value of the critical current density on the absence or presence of an ambient magnetic field cannot be accounted for by the beam-induced heating model. Consequently, this work presents robust experimental evidence suggesting that Coulomb explosion driven by electrostatic charging is the root cause of EBIF.
AbstractThis study applies Semantic Web technologies to advance Materials Science and Engineering (MSE) through the integration of diverse datasets. Focusing on a 2000 series age-hardenable aluminum alloy, we correlate mechanical and microstructural properties derived from tensile tests and dark-field transmission electron microscopy across varied aging times. An expandable knowledge graph, constructed using the Tensile Test and Precipitate Geometry Ontologies aligned with the PMD Core Ontology, facilitates this integration. This approach adheres to FAIR principles and enables sophisticated analysis via SPARQL queries, revealing correlations consistent with the Orowan mechanism. The study highlights the potential of semantic data integration in MSE, offering a new approach for data-centric research and enhanced analytical capabilities.
This study investigates the room‐ and high‐temperature (650 °C) tensile and low‐cycle‐fatigue behavior of Inconel 718 produced by laser powder bed fusion (PBF‐LB/M) with a four‐step heat treatment and compares the results to the conventional wrought material. The microstructure after heat treatment is characterized on different length scales. Compared to the wrought variant, the elastic and yield properties are comparable at both test temperatures while tensile strength, ductility, and strain hardening capacity are lower. The fatigue life of the PBF‐LB/M variant at room temperature is slightly lower than that of the wrought material, while at 650 °C, it is vice versa. The cyclic stress response for both material variants is characterized by cyclic softening, which is more pronounced at the higher test temperature. High strain amplitudes (≥0.7%) at room temperature and especially a high testing temperature result in the formation of multiple secondary cracks at the transitions of regions comprising predominantly elongated grain morphology and columns of stacked grains with ripple patterns in the PBF‐LB/M material. This observation and pronounced crack branching and deflection indicate that the cracks are controlled by sharp micromechanical gradients and local crystallite clusters.
Processing and cytocompatibility of Cu-doped and undoped fluoride-containing bioactive glasses
(2024)
Sintered or additive-manufactured bioactive glass (BG) scaffolds are highly interesting for bone replacement applications. However, crystallization often limits the high-temperature processability of bioactive glasses (BGs). Thus, the BG composition must combine high bioactivity and processability. In this study, three BGs with nominal molar (%) compositions 54.6SiO2-1.7P2O3-22.1CaO-6.0Na2O-7.9K2O-7.7MgO (13–93), 44.8SiO2-2.5P2O3-36.5CaO-6.6Na2O-6.6K2O-3.0CaF2 (F3) and 44.8SiO2-2.5P2O3-35.5CaO-6.6Na2O-6.6K2O-3.0CaF2-1.0CuO (F3–Cu) were investigated. The dissolution and ion release kinetics were investigated on milled glass powder and crystallized particles (500–600 μm). All glasses showed the precipitation of hydroxyapatite (HAp) crystals after 7 days of immersion in simulated body fluid. No significant differences in ion release from glass and crystalline samples were detected. The influence of surface roughness on cytocompatibility and growth of preosteoblast cells (MC3T3-E1) was investigated on sintered and polished BG pellets. Results showed that sintered BG pellets were cytocompatible, and cells were seen to be well attached and spread on the surface after 5 days of incubation. The results showed an inverse relation of cell viability with the surface roughness of pellets, and cells were seen to attach and spread along the direction of scratches.
Extended X-ray absorption fine structure (EXAFS) conducted on an equiatomic MoNbTaW bcc medium-entropy alloy that was annealed at 2273 K reveals unexpectedly small 1st and 2nd shell element-specific lattice distortions. An experimental size-mismatch parameter, δexp, is determined to be ca. 50% lower than the corresponding calculated value. Around W, short-range order (SRO) preferring 4d elements in the 1st and 2nd shells persists. A Nb-W ordering is found, which is reminiscent of ordering emerging at lower temperatures in the B2(Mo,W;Ta,Nb)- and B32(Nb,W)-phases. With high-temperature ordering preferences in fcc also foreshadowing low-temperature phase, these findings suggest a general feature of high-temperature SRO.
The digitalization of materials science and engineering (MSE) is currently leading to remarkable advancements in materials research, design, and optimization, fueled by computer‐driven simulations, artificial intelligence, and machine learning. While these developments promise to accelerate materials innovation, challenges in quality assurance, data interoperability, and data management have to be addressed. In response, the adoption of semantic web technologies has emerged as a powerful solution in MSE. Ontologies provide structured and machine‐actionable knowledge representations that enable data integration, harmonization, and improved research collaboration. This study focuses on the tensile test ontology (TTO), which semantically represents the mechanical tensile test method and is developed within the project Plattform MaterialDigital (PMD) in connection with the PMD Core Ontology. Based on ISO 6892‐1, the test standard‐compliant TTO offers a structured vocabulary for tensile test data, ensuring data interoperability, transparency, and reproducibility. By categorizing measurement data and metadata, it facilitates comprehensive data analysis, interpretation, and systematic search in databases. The path from developing an ontology in accordance with an associated test standard, converting selected tensile test data into the interoperable resource description framework format, up to connecting the ontology and data is presented. Such a semantic connection using a data mapping procedure leads to an enhanced ability of querying. The TTO provides a valuable resource for materials researchers and engineers, promoting data and metadata standardization and sharing. Its usage ensures the generation of finable, accessible, interoperable, and reusable data while maintaining both human and machine actionability.
Thermoelectric generators are very attractive devices for waste heat energy harvesting as they transform a temperature difference into electrical power. However, commercially available generators show poor power density and limited operation temperatures. Research focuses on high‐temperature materials and innovative generator designs. Finding the optimal design for a given material system is challenging. Here, a theoretical framework is provided that allows appropriate generator design selection based on the particular material properties. For high‐temperature thermoelectric oxides, it can be clearly deduced that unileg multilayer generators have the highest potential for effective energy harvesting. Based on these considerations, prototype unileg multilayer generators from the currently best thermoelectric oxide Ca3Co4O9 are manufactured for the first time by industrially established ceramic multilayer technology. These generators exhibit a power density of 2.2 mW/cm² at a temperature difference of 260 K, matching simulated values and confirming the suitability of the technology. Further design improvements increase the power density by a factor of 22 to facilitate practicable power output at temperature differences as low as 7 K. This work demonstrates that reasonable energy harvesting at elevated temperatures is possible with oxide materials and appropriate multilayer design.
The unusual behavior observed in the coefficient of thermal expansion and specific heat capacity of CrFeNi, CoCrNi, and CoCrFeNi medium/high-entropy alloys is commonly referred to as the K-state effect. It is shown to be independent of the Curie temperature, as demonstrated by temperature-dependent magnetic moment measurements. CoCrFeNi alloy is chosen for detailed characterization; potential reasons for the K-state effect such as texture, recrystallization, and second-phase precipitation are ruled out. An examination of the electronic structure indicates the formation of a pseudo-gap in the Density of States, which suggests a specific chemical interaction between Ni and Cr atoms upon alloying. Hybrid Monte Carlo/Molecular Dynamic (MC/MD) simulations indicate the presence of non-negligible chemical short-range order (CSRO). Local lattice distortions are shown to be negligible, although deviations around Cr and Ni elements from those expected in a fully disordered structure are experimentally observed by X-ray absorption spectroscopy. The determined bonding distances are in good agreement with MC/MD calculations. A mechanism is proposed to explain the anomalies and calorimetric experiments and their results are used to validate the mechanism.
Irradiation assisted stress corrosion cracking (IASCC) is a form of intergranular stress corrosion cracking that occurs in irradiated austenitic alloys. It requires an irradiated microstructure along with high temperature water and stress. The process is ubiquitous in that it occurs in a wide range of austenitic alloys and water chemistries, but only when the alloy is irradiated. Despite evidence of this degradation mode that dates back to the 1960s, the mechanism by which it occurs has remained elusive. Here, using high resolution electron backscattering detection to analyze local stress-strain states, high resolution transmission electron microscopy to identify grain boundary phases at crack tips, and decoupling the roles of stress and grain boundary oxidation, we are able to unfold the complexities of the phenomenon to reveal the mechanism by which IASCC occurs. The significance of the findings impacts the mechanical integrity of core components of both current and advanced nuclear reactor designs worldwide.
In the past two decades, numerous relaxation or physical aging experiments of metallic glasses have revealed signatures of intermittent atomic-scale processes. Revealed via intensity cross-correlations from coherent scattering using X-ray photon correlation spectroscopy (XPCS), the observed abrupt changes in the time-domain of atomic motion does not fit the picture of gradual slowing down of relaxation times and their origin continues to remain unclear. Using a binary Lennard-Jones model glass subjected to microsecond-long isotherms, we show here that temporally and spatially heterogeneous atomic-cluster activity at different length-scales drive the emergence of highly non-monotonous intensity cross-correlations. The simulated XPCS experiments reveal a variety of time-dependent intensity-cross correlations that, depending on both the structural evolution and the 𝑞-space sampling, give detailed insights into the possible structural origins of intermittent aging measured with XPCS.