5 Werkstofftechnik
Filtern
Dokumenttyp
- Posterpräsentation (118) (entfernen)
Sprache
- Englisch (102)
- Deutsch (15)
- Französisch (1)
Referierte Publikation
- nein (118) (entfernen)
Schlagworte
- Glass (8)
- Additive manufacturing (6)
- Creep (6)
- Degradation (5)
- Microstructure (5)
- Additive Manufacturing (4)
- Coarsening (4)
- Corrosion (4)
- Crack growth (4)
- FAIR (4)
- Transmission electron microscopy (4)
- 316L (3)
- Ab-initio (3)
- Alloy 2618A (3)
- Crystallization (3)
- EBSD (3)
- Fatigue (3)
- Hydrogen (3)
- NTE (3)
- Nanoparticles (3)
- Oxidation (3)
- Soda-lime silicate glass (3)
- Sol-gel (3)
- Solid-state (3)
- TDEP (3)
- VSSA (3)
- Vickers (3)
- Bildanalyse (2)
- Crack Propagation (2)
- Crystal orientation (2)
- DCB (2)
- Dark-field transmission electron microscopy (DFTEM) (2)
- Depth-profiling (2)
- Deuterium (2)
- Electron beam induced modification (2)
- Electron microscopy (2)
- Environmental stress cracking (ESC) (2)
- FIB (2)
- GD-OES (2)
- Gold nanoparticles (2)
- High temperature corrosion (2)
- Imaging techniques (2)
- Inconel 686 (2)
- Iron oxide nanoparticles (2)
- Kikuchi (2)
- LTCC (2)
- Lattice parameters (2)
- Lithium Ion Batteries (2)
- Low Cycle Fatigue (2)
- Machine Learning (2)
- Metadata schema (2)
- Mikroplastik (2)
- NFDI (2)
- Ontologie (2)
- Ontology (2)
- Oxidglas (2)
- Plattform MaterialDigital (2)
- Polymer (2)
- Ratio refinement (2)
- Reference Data (2)
- Reference data (2)
- Referenzdaten (2)
- Research Data Management (2)
- Robotische Glasschmelzanlage (2)
- Sample preparation (2)
- Sandwich (2)
- Selective laser melting (2)
- Semantic Interoperability (2)
- Semantic Web Technologies (2)
- Sintering (2)
- Sulfidation (2)
- Syngle Crystal alloy (2)
- TED-GC-MS (2)
- Ti-6Al-4V (2)
- ToF-SIMS (2)
- Water content (2)
- Water speciation (2)
- 3D (1)
- 3D imaging (1)
- 5G (1)
- AFM (1)
- AISI 304L (1)
- AM (1)
- Abwasser (1)
- Additiv gefertigter Stahl (1)
- Additive Fertigung (1)
- Aggressive environement (1)
- Aggressive environment (1)
- Aging mechanisms (1)
- Al-Cu-Li alloys (1)
- Alkali ions (1)
- Aluminium (1)
- Analysis (1)
- Anhydrite (1)
- Anisotropy (1)
- Artefact (1)
- Atacama Desert (1)
- Atmospheric Plasma Spraying (1)
- Atomic packing factor (1)
- Atomization (1)
- Austenitic stainless steel (1)
- Austenitic steel (1)
- Automation (1)
- BCS (1)
- BTS (1)
- Belebtschlamm (1)
- Bilanzierung (1)
- Bio Ceramics (1)
- Bioactive glass (1)
- Biofilm (1)
- Bioresorbable (1)
- Boden (1)
- Borate glasses (1)
- Brittle / ductile fracture behavior (1)
- Brittle fracture (1)
- CALPHAD (1)
- CALPHAD databases analysis (1)
- CCS (1)
- CMSX4 (1)
- Calcium cobaltite (1)
- Carbon Fiber Reinforced Plastics (1)
- Carbon capture (1)
- Carbon dioxide (1)
- Ceramic (1)
- Chemically Complex Alloy (1)
- Chemometrie (1)
- Chromium oxide (1)
- Co-axial monitoring (1)
- Complex concentrated alloy (CCA) (1)
- Composite (1)
- Computed Tomography (1)
- Corrosion resistance (1)
- Crack (1)
- Crack evolution (1)
- Crack healing (1)
- Crack propagation analysis (1)
- Crystal plasticity (1)
- DED-L (1)
- Dark-field transmission electron microscopy (1)
- Data Fusion (1)
- Data Integration (1)
- Data Interoperability (1)
- Data fusion (1)
- Data schema (1)
- Demonstrators (1)
- Density (1)
- Destabilization (1)
- Dielectric Spectroscopy (1)
- Diesel (1)
- Diffraction Enhanced Imaging (1)
- Diffusion coefficient (1)
- Digital material representation (1)
- Digitaler Zwilling (1)
- Digitalisierung (1)
- Digitalization (1)
- Digtial Representation (1)
- Diopside (1)
- Directional grain growth (1)
- Dislocations (1)
- Distributed fiber optic sensors (1)
- EDX (1)
- Electromicroscopy (1)
- Electron Backscatter Diffraction (1)
- Electronic Lab Notebook (1)
- Environmental stress cracking (1)
- FeCr- alloys (1)
- Film depositition (1)
- Focussed ion beam growth (1)
- Fracture Toughness (1)
- Fracture surface analysis (1)
- Fraktografie (1)
- Fresnoit (1)
- Full Notch Creep Test (1)
- Full Notch Creep Test (FNCT) (1)
- Full-Notch Creep Test (FNCT) (1)
- Fused Filament Fabrication (1)
- GFRP (1)
- Gas permeation (1)
- Glas (1)
- GlasDigital (1)
- Glasfaserverstärkter Kunststoff (1)
- Glass ceramic (1)
- Glass composition (1)
- Glass fiber reinforced polymers (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramic (1)
- Gypsum (1)
- HDPE Sorption (1)
- HV-Insulation (1)
- Hardness (1)
- Heat Treatment (1)
- High Cycle Fatigue (1)
- High Temperature Testing (1)
- High Voltage Insulation (1)
- High entropy alloy (1)
- High pressure gas storage (1)
- High temperature (1)
- High-density polyethylene (1)
- High-entropy alloys (1)
- High-temperature corrosion (1)
- Hot stage microscopy (1)
- Hydrogen gas (1)
- Hydrogen permeability (1)
- IR (1)
- In situ (1)
- In situ tensile test (1)
- In-situ tomography (1)
- In718 (1)
- Infrarotspektroskopie (1)
- Internal friction (1)
- Interoperability (1)
- Kavitation (1)
- Knowledge Representation (1)
- Knowledge graph and ontologies (1)
- Kontrastierung (1)
- LCF (1)
- LMD (1)
- LTCC multilayer (1)
- Laser Beam Melting (1)
- Laser Cladding (1)
- Laser Powder Bed Fusion (1)
- Laser ablation in liquid (1)
- Laser cladding (1)
- Lightweight materials (1)
- Lithium-ion batteries (1)
- Local landscape evolution (1)
- Long-term behavior (1)
- Low cycle fatigue (1)
- ML (1)
- Manganese oxide (1)
- Material characterization (1)
- Material oxidation (1)
- Mechanical Behavior (1)
- Metal powder characterization (1)
- Metal seal (1)
- Metformin (1)
- Metrology (1)
- Micro computed tomography (1)
- Micromanipulation (1)
- Microplastics (1)
- Microstructure Analysis (1)
- Microstructure analysis (1)
- Mikrostruktur (1)
- Model alloy (1)
- Modeling (1)
- NFDI-MatWerk (1)
- NMR (1)
- Nahinfrarotspektroskopie (1)
- Nano-landscape (1)
- Nano-powder characterization (1)
- Nanomaterial screening (1)
- Non-Destructive Testing (1)
- Optical criterion (1)
- Orientation (1)
- Orientation-dependent microstructure (1)
- Oxide Glasses (1)
- PE-HD (1)
- PMD Core Ontology (1)
- PMDco (1)
- Particle size (1)
- Peem (1)
- Phase-field simulation (1)
- Photocatalysis (1)
- Polyethylene, PE-HD (1)
- Polymer-Ceramic-Composite (1)
- Porosity (1)
- Precipitation (1)
- ProMoAM (1)
- Process Monitoring (1)
- Property simulation (1)
- Prozessmonitoring (1)
- Präparation (1)
- Pulveraktivkohle (1)
- Reference Dataset (1)
- Reference material (1)
- Reference nanomaterials (1)
- Reliable characterization (1)
- Residual stress (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Rotorblätter (1)
- Röntgenbeugung (1)
- Röntgenrefraktion (1)
- S-phase (1)
- SEM (1)
- SIMS (1)
- SLM (1)
- Salt melt (1)
- Sandwichstruktur (1)
- Scale-bridging (1)
- Scanning electron microscopy (SEM) (1)
- Scarf joint repairs (1)
- Schadensanalyse (1)
- Semantic Data (1)
- Silver (1)
- Silver glass paste (1)
- Silver nanoparticle (1)
- Simulation (1)
- Size and size distribution (1)
- Slurry (1)
- Small angle x-ray scattering (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Soil sample (1)
- Starch (1)
- Starch nanoparticle (1)
- Sulfiding (1)
- Superalloy (1)
- Surface (1)
- Surface Energy (1)
- Surface crystallization (1)
- Surface energy (1)
- Synchrotron (1)
- Synchrotron Tomography (1)
- Synchrotron tomography (1)
- Synthetic air (1)
- TEM (1)
- Tensile Properties (1)
- Thermal Spray (1)
- Thermoanalyse (1)
- Thermodynamic analysis (1)
- Thermoelectric generator design (1)
- Thermoelectric oxides (1)
- Thermogravimetrie (1)
- Thermomechanics (1)
- Time-offlight Diffraction (TOFD) (1)
- Titanium (1)
- Titanium oxide (1)
- Topografie (1)
- Transmission electron microscope (TEM) (1)
- Ultrasonic Testing (1)
- Ultrasound (1)
- VM12 SHC (1)
- Vickers indentation (1)
- Virtual experiments (1)
- Viscosity (1)
- Wind turbine blade shells (1)
- Wind turbine blades (1)
- X-Ray Diffraction (1)
- X-ray refraction (1)
- XRD (1)
- Young´s Modulus (1)
Organisationseinheit der BAM
- 5 Werkstofftechnik (118) (entfernen)
As part of a joint project involving the Fraunhofer Institute for Silicate Research (ISC), the Friedrich Schiller University of Jena, the Clausthal University of Technology and the Federal Institute for Materials Research and Testing (BAM), digital tools are to be created for the development of new types of glass materials. Current processes for the production of glasses with improved properties are usually very cost- and energy-intensive due to the low degree of automation and are subject to long development cycles. The use of robotic synthesis processes in combination with self-learning machines is intended to overcome these problems in the long term. The development of new types of glass can then not only be accelerated considerably, but also be achieved with much less effort.
In this talk, data generation via a robotic high-throughput glass melting system is presented, which should be the experimental basis for the ontology developed within the project GlasDigital.
Lithium-ion batteries (LIBs) are one technology to overcome the challenges of climate and energy crisis. They are widely used in electric vehicles, consumer electronics, or as storage for renewable energy sources. However, despite innovations in batteries' components like cathode and anode materials, separators, and electrolytes, the aging mechanism related to metallic aluminum current collector degradation causes a significant drop in their performance and prevents the durable use of LIBs. Glow-discharge optical emission spectroscopy (GD-OES) is a powerful method for depth-profiling of batteries' electrode materials. This work investigates aging-induced aluminum deposition on commercial lithium cobalt oxide (LCO) batteries' cathodes. The results illustrate the depth-resolved elemental distribution from the cathode surface to the current collector. An accumulation of aluminum is found on the cathode surface by GD-OES, consistent with results from energy-dispersive X-ray spectroscopy (EDX) combined with focused ion beam (FIB) cutting. In comparison to FIB-EDX, GD-OES allows a fast and manageable depth-profiling. Results from different positions on an aged cathode indicate an inhomogeneous aluminum film growth on the surface. The conclusions from these experiments can lead to a better understanding of the degradation of the aluminum current collector, thus leading to higher lifetimes of LIBs.
Up to now, oriented surface crystallization phenomena are discussed controversially, and related studies are restricted to few glasses. For silicate glasses we found a good correlation between the calculated surface energy of crystal faces and oriented surface nucleation. Surface energies were estimated assuming that crystal surfaces resemble minimum energy crack paths along the given crystal plane. This concept was successfully applied by Rouxel in calculating fracture surface energies of glasses. Several oriented nucleation phenomena can be herby explained assuming that high energy crystal surfaces tend to be wetted by the melt. This would minimize the total interfacial energy of the nucleus. Furthermore, we will discuss the evolution of the microstructure and its effect on the preferred crystal orientation.
Multilayer thermoelectric generators are a promising perspective to the conventional π-type generators. Ceramic multilayer technology is well established for production of microelectronics and piezo-stacks. Key features of ceramic multilayer technology are full-automation, cost-effectiveness, and the co-firing of all materials in one single step. This requires similar sintering temperatures of all used materials. The development of multilayer thermoelectric generators is a subject of current research due to the advantages of this technology. One of the challenges is the compatibility of the different materials with respect to the specific design.
The presented study compares three different designs of multilayer generators based on a given set of material properties. Dualleg, unileg and transverse multilayer generators are compared to conventional π-type generators., the designs are evaluated regarding the expected maximum output power and power density using analytical calculations and FEM simulations. Additionally, the complexity of the production process and material requirements are assessed and design optimizations to simplify production are discussed.
Besides the theoretical aspects, unileg multilayer generator prototypes were produced by tape-casting and pressure-assisted sintering. These prototypes are compared to other multilayer generators from literature regarding the power factors of the used material system and the power density. Improvements of the power output by design optimizations are discussed
The interest to additively manufacture Nickel-based superalloys has substantially grown within the past decade both academically and industrially. More specifically, additive manufacturing processes such as laser powder bed fusion (LPBF) offer the ability to produce dense parts within a single manufacturing step. In fact, the exceptional freedom in design associated with the layer-based nature of the processes is of particular interest for the complex shapes typically required in turbine applications. In certain cases, the overall part performance can be achieved by tailoring the microstructure and the crystallographic texture to the specific application. However, these advantages must be paid at a price: the large local temperature gradients associated with the rapid melting and solidification produce parts that inherently contain large residual stress in the as-manufactured state. In addition, the presence of pores in the final part may further affect the in-service part failure. As among Nickel-based alloys Inconel 718 exhibits excellent weldability, this alloy has been widely studied in open research in the domain of LPBF. However, significant microsegregation of the heavier alloying elements such as Niobium and Molybdenum accompanied by dislocation entanglements may preclude the application of conventional heat treatment schedules. Therefore, different post processing heat treatments are required for laser powder bed fused Inconel 718 as compared to conventional variants of the same alloy.
In this study, we investigated two different heat treatment routes for LPBF Inconel 718. In a first routine, the samples were stress relieved and subsequently subjected to hot isostatic pressing (HIP) followed by a solution heat treatment and a two-step age (referred to as FHT). In a second routine, the samples were subjected to a single-step direct age post stress relieving heat treatment (referred to DA). We investigated the consequences of such heat treatment schedules on the microstructure, texture, and mechanical behavior. We show that by applying a DA heat treatment the typical columnar microstructure possessing a crystallographic texture is retained, while an equiaxed untextured microstructure prevails in case of an FHT heat treatment. We further evaluate how these heat treatments affect the mechanical behaviour on the macroscopic and microscopic scale.
Currently, calcium manganate CaMnO3 and calcium cobaltite Ca3Co4O9 are being investigated as n-type resp. p-type semiconducting materials as oxidation- and temperature-resistant thermoelectric materials for oxide multilayer thermoelectric generators (TEGs). In order to manufacture multilayer TEGs, pressure-assisted sintering processes at high temperatures are necessary to achieve optimal thermoelectric material properties. To realize TEGs in planar film technology, another method to obtain dense ceramic layers directly from the synthesized starting powders without a subsequent high temperature step is emerging recently: the powder aerosol deposition (PAD) method. In the present work, it is investigated whether PAD is suitable to produce dense ceramic films from Sm-doped CaMnO3 and Ca3Co4O9 powders. The resulting thermoelectric properties are characterized as a function of temperature.
CaMnO3 powder could successfully be processed by PAD with resulting layer thicknesses of 5- 6 µm without any high-temperature sintering steps of the films. The electrical conductivity and the Seebeck coefficient of the films were determined in-plane from room temperature to 600 °C in air. The results show a Seebeck coefficient of around -200 µV/K, which is comparable to results of pressed and sintered bars. At 400 °C, the electrical conductivity corresponds to the conductivity of the bar. At higher temperatures the conductivity is better than with the reference. Below 400°C, the electrical conductivity is somewhat lower than that of the reference sample, a mild thermal treatment of the PAD layer improves it. It is expected that the thermal conductivity of the PAD film will be lower compared to the bars due to the nano-crystalline film morphology. This should result in a significantly increased ZT value for the PAD layers and a higher efficiency of the TEG.
The work shows that both CaMnO3 and Ca3Co4O9 can be successfully processed by PAD, and the PAD films show comparable thermoelectric properties.
Melting of Na2CO3-ZnO-B2O3 batches containing up to 16.8 wt% AgNO3 (5 mol% Ag2O in the target glass composition) was observed in situ by means of hot stage microscopy. In all batches metallic silver precipitation took place as most of the silver nitrate was reduced to metallic silver before Ag+ ions could be dissolved in the evolving borate melts. In turn, only traces of Ag+ (<300 ppmw) were dissolved in the sodium zinc borate glass melts under study. It is assumed that the oxidation to Ag+ was limited due to poor availability of reducible oxygen in the glass melts and presence of Na2O being a stronger base than Ag2O. Thus, the precipitated metallic silver formed droplets of different sizes. The larger droplets (d > 20 µm) were already settled at the bottom of the container and remained constant in size upon dwelling for 1 h at 1050 °C of about one hour and the subsequent cooling (45 K/min) to room temperature, whereas the smaller droplets (d < 20 µm) were mobile in the borate melt due to Marangoni and Stokes motion. For the latter droplets, coalescence was observed in situ. A growth of larger droplets at the expense of smaller ones, i.e., Ostwald ripening was also expected but could not be studied with the used experimental equipment.
Early Material Damage in Equimolar CrMnFeCoNi in Mixed Oxidizing/Sulfiding Hot Gas Atmosphere
(2022)
The use of more and more varied fuels implies an increased list of criteria that need to be addressed when choosing a material for a combustion chamber and its supply pipes. The materials must be very resistant against corrosion, especially when the process takes place at temperatures above 500°C. In this work the influence of SO2 on the surface of the “Cantor alloy” is investigated.
Additive manufacturing (AM) processes are opening new design possibilities for large scale electrical devices such as power generators. Conventional manufacturing methods use copper rods which are wrapped, vacuum impregnated, bend and welded. These processes are labor-intensive and time-consuming. The introduction of AM methods for manufacturing the copper conductor and electrical insulation can reduce the size of the generator head, the most complex part of the generator.
In this study, the electrical and dielectrical properties of additively deposited ceramic layers are investigated and compared with the properties of conventionally fabricated bulk ceramics. The ceramic layers are thermally deposited by atmospheric plasma spraying of a commercially available alumina powder. Bulk ceramics are fabricated by dry pressing and sintering of the same powder. Microstructure and porosity were analyzed by scanning electron microscopy (SEM). Electrical and dielectrical properties such as DC resistance, dielectric strength, dielectric loss, and relative permittivity were determined according to the standards.
The microstructures of sprayed and sintered alumina show significant differences with respect to grain form and porosity. The density of the bulk ceramic is lower than the density of the sprayed layer due to the coarse particle size (d50 = 33 μm). Therefore, data from dense samples of the same chemical composition but lower particle size alumina powder were used for comparison.
The insulation system of high voltage electrical devices like generators and electrical motors has to withstand thermal, electrical, ambient and mechanical influences (TEAM) during operation. Especially the dielectric properties have to satisfy the requirements also under elevated temperatures and extreme environments. To provide this high quality, the conventional fabrication process uses partly manually applied insulation tapes combined with a cost-intensive and under safety concerns at least problematic vacuum pressure impregnation step (VPI). In order to reduce process costs by increasing the degree of automation and avoiding the VPI process, additively manufactured (AM) insulations were studied. This study focuses on the fabrication of ceramic/polymer compounds via AM technique. The AM technology used a rotating screw extrusion print head with air pressure to supply the paste. Plate-like samples with dimensions of 55 mm x 55 mm x1mm thickness were produced. This work focuses on the homogeneously high viscous paste with 12.5 to 50 volume % ratio of filler particles. Three types of mica powders as ceramic filler materials with different particle sizes from micro to mm scale were evaluated. The controlled volume % ratio of particles affects the paste viscosity which enables stacking of paste layers with a viscosity close to clay pastes. The mixed pastes were cured by heating and UV light to increase mechanical properties. A TG/DTA was performed, and electrical properties were investigated. First experiments with respect to the dielectric properties such as volume resistance, permittivity and dielectric strength revealed promising results and the possibility to use AM techniques for the fabrication of high voltage insulations for electrical machines.
Additively Manufactured (AM) parts are still far from being used in safety-relevant applications, mainly due to a lack of understanding of the feedstock-process-propertiesperformance relationship. This work aims at providing a characterization of the fatigue behavior of the additively manufactured AISI 316L austenitic stainless steel and a direct comparison with the fatigue performance of the wrought steel. A set of specimens has been produced by laser powder bed fusion (L-PBF) and a second set of specimens has been machined out of hot-rolled plates. The L-PBF material shows a higher fatigue limit and better finite life performance compared to the wrought material, accompanied by an extensive amount of cyclic softening.
Molecular orientation has a significant effect on the material properties of polymers. Preferential orientation of the microstructure (polymer chains or crystallites) in a specific direction or plane often enhances the material properties, especially if the high-strength covalent bonds are primarily exposed to loads instead of the weaker van der Waals bonds. However, the orientation-dependent microstructure and its mechanical behavior is in general already well understood by many scientific studies [1-3]. Isotropic materials are frequently required for an intrinsic material characterization without prevailing processing-induced properties, as is the case for Full Notch Creep Test (FNCT) [4] addressing environmental stress cracking (ESC) in high-density polyethylene (PE-HD) [5, 6]. Since ESC is one of the major limiting issues for long-term performance of PE-HD pipes and containers [7], which in contrast have a production-related preferential orientated microstructure due to extrusion or extrusion blow molding, it is important to additionally investigate the ESC resistance of such anisotropic microstructure.
Investigations of the slow crack growth (SCG) with respect to the molecular orientation generally obtain a factor of 1.2 up to 4.7 between crack growth perpendicular to the extrusion direction and crack growth parallel to the extrusion direction 8. Based on FNCT investigations with an aqueous detergent solution as environmental medium, hot pressed sheets with isotropic morphology are compared with extruded sheets from which specimens with different orientation angles are taken. However, the time to failure obtained by FNCT is also significantly influenced by the different cooling conditions under which the final morphology is formed. The tendency of the specimen to fail due to ESC is investigated as a function of environmental medium temperature. For a more detailed analysis of the affecting parameters in the manufacturing process, the ESC resistance is discussed considering the differences in crystallinity as revealed by thermal analysis.
High- and medium-entropy alloys (HEAs and MEAs) constitute a new class of materials. Those with a face-centered cubic (fcc) structure from the Cr-Mn-Fe-Co-Ni system have excellent mechanical properties and are considered for high-temperature applications since diffusion in these alloys was reported to be sluggish. However, their corrosion resistance at high temperatures must still be evaluated to further qualify them for such kinds of applications. Various groups studied the oxidation behavior of HEAs and MEAs under (dry) laboratory and artificial air as well as CO2/CO mixtures in different temperature ranges. Adomako et al. carried out oxidation tests in dry air between 800 °C and 1000 °C for 24 h in equiatomic CrCoNi, CrMnCoNi, and CrMnFeCoNi alloys. The authors showed that CrCoNi exhibits the best corrosion resistance at 800 °C due to the formation of a protective Cr2O3 layer. The matrix below the oxide scale was reported to be correspondingly depleted in Cr. It was further shown that the addition of Mn and Fe to CrCoNi changes the phase composition of the oxide scale at 800 °C. A Mn2O3 layer was grown during oxidation on CrMnCoNi and CrMnFeCoNi and a Cr2O3 scale was formed at the matrix/oxide scale interface. Beneath these oxide layers, Mn- and Cr-depleted zones were detected. These phase morphologies demonstrate the inward diffusion of oxygen and outward diffusion of Cr and Mn resulting in the formation of Cr2O3 and Mn2O3. In the present study, the corrosion resistance of CrMnFeCoNi and CrCoNi were confirmed and additionally characterized under further oxidizing atmospheres at 800 °C including Ar-2 Vol.% O2, Ar-2 Vol.% H20, and Ar-2 Vol.% SO2 mixtures.
Low melting zinc borate glasses awake interest to replace lead borate glasses in the silver metallization pastes for solar cells or microelectronics. In the current study, characteristic properties of alkali zinc borate glasses (X2O-ZnO-B2O3, X = Li, Na, K, Rb) were compared to an earth alkali zinc borate glass (CaO-ZnO-B2O3). Additionally, zinc oxide is partially substituted by lead oxide or cooper oxide in the borate glasses (Li2O-PbO-B2O3, Na2O ZnO CuO-B2O3). The alkali zinc borate glasses indicate less differences in Raman spectra, and thus in structural properties, in comparison to the Ca and Pb ions influence. LPbB (Tg = 401 °C) has a lower viscosity than LZB (Tg = 468 °C) and CaZB has the highest glass transition temperature (Tg = 580 °C). The Angell plot for the alkali zinc borate glasses shows a high fragility m = 80. Besides Tg, the density measured by means of the Archimedean principle, molar volume, and coefficient of thermal expansion (CTE) of the glasses were investigated. Trends could be found according to alkali ions or intermediate oxides. The density increases with decreasing alkali ion size from KZB (2.632 g/cm3) to LZB (2.829 g/cm3) and increases from LZB to LPbB (3.764 g/cm3). CTE ranges between 7.09 10-6 K-1 for CaZB and 11.5 10 6 K 1 for KZB and RZB. The differential thermal analysis (DTA) and X ray diffraction (XRD) indicate crystallization of various crystalline phases during heating with 5 K/min in most cases.
Limits of computer tomography aided characterization of different types of porous ceramic materials
(2021)
Ceramics with open porosity are attractive materials in many fields of applications covering medicine, catalysis, and filtration. Manifold technologies to produce porous ceramics are available, e.g. foaming and replica processes, resulting in various microstructures. Development and manufacturing of new materials is accelerating, while crucial characterization is becoming increasingly difficult and conventional measurements lack the desired speed. Computed tomography (CT) offers the possibility to three-dimensionally characterize entire samples with minimal sample preparation, while its main advantage is that it is non-destructive. Still, the assessment of quantitative results from CT measurements is not trivial.
The poster presents CT characterizations of newly developed as well as commercially available openly porous ceramic samples. Properties such as porosity, permeability or pore characteristics were measured conventionally and compared to results calculated from CT-measurements using the commercial software VG StudioMax.
The determined differences between measured and calculated values are presented and application areas as well as limits of the CT characterization are evaluated.
Development and characterization of starch film and the incorporation of silver nanoparticles
(2020)
Starch is one of the biopolymers being used for bioplastic synthesis. For production, starch can be combined with different plasticizers, starches from different plant sources and even with nanomaterials to improve or to add film properties. The challenge of adding these, e.g. in the form of silver nanoparticles (AgNp) is to determine the concentration so as to avoid impairing the properties of the film, agglomeration or altering the visual characteristics of the film. In this study, a starch film synthesis route and the incorporation of silver nanoparticles has been proposed in order not to alter the properties of the film while maintaining the transparency and a clear colour of the starch film. The results showed that the proposed synthesis route is promising, efficient, reproducible, fast and the film has good mechanical properties.
Modern air-liners and wind turbine rotor blades are made up primarily of fiber reinforced plastics. Failure of these materials heavily impairs the serviceability and the operational safety. Consequently, knowledge of the failure behavior under static and cyclic loads is of great interest to estimate the operational strength and to compare the performance of different materials. Ideally, the damage evolution under operational load is determined with in-situ non-destructive testing techniques. Here, we report in-situ synchrotron X-ray imaging of tensile stress induced cracks in carbon fiber reinforced plastics due to inter-fiber failure. An inhouse designed compact tensile testing machine with a load range up to 15 kN was integrated into the beamline. Since conventional radiographs do not reveal sufficient contrast to distinguish cracks due to inter-fiber failure and micro cracking from fiber bundles, the Diffraction Enhanced Imaging (DEI) technique is applied in order to separate primary and scattered (refracted) radiation by means of an analyzer crystal. This technique allows fast measurements over large fields-of-view and is ideal for in-situ investigations.
Background, Motivation and Objective
Nanomaterials are at the core of some of the 21st century’s most promising technologies. In order to utilize and rationally design materials at the nanoscale the reliable characterization of their physico-chemical properties is highly important. Furthermore, the European Commission has taken measures via the REACH Regulations to control the classification of nanomaterials. REACH Annexes which entered into force in January 2020 require manufacturers to register nanomaterials that are traded in larger quantities (at least 1 ton). Every powder or dispersion where 50% (number distribution) of the constituent particles have sizes ≤ 100 nm in at least one dimension are defined as a nanomaterial. This creates a need for both industrial manufacturers and research and analytical service facilities to reliably characterize potential nanomaterials. Currently, BAM is working on developing reference nanoparticles, which shall expand the scarce list of worldwide available nano reference materials certified for particle size distribution, but also targeting other key parameters such as shape, structure (including porosity) and functional properties. Thus, candidate materials are considered to complement the already available spherical and monodisperse silica, Au and polystyrene reference nanoparticles, e.g. iron oxide and titanium oxide, with an average atomic number between those of silica and gold. Particularly for the imaging by electron microscopies, new nanoparticles of well-defined size in the range of 10 nm are decisive for the accurate particle segmentation by setting precise thresholds.
Statement of Contribution/Methods
Synthesis: Highly monodisperse iron oxide nanoparticles can be synthesized in large quantities by thermal decomposition of iron oleate or iron acetylacetonate precursors in high boiling solvents such as octadecene or dioctyl ether in the presence of oleic acid and oleylamine as capping agents.
Scanning Electron Microscope: An SEM of type Supra 40 from Zeiss has been used including the dedicated measurement mode transmission in SEM (STEM-in-SEM) with a superior material contrast for the nanoparticle analysis. The software package ImageJ has been used for the analysis of the STEM-in-SEM images and to determine the particle size distribution.
Dynamic Light scattering (DLS): Particles in suspension were measured in comparison by means of Zetasizer Nano (Malvern Panalytical; cumulants analysis) and NanoFlex (Microtrac; frequency power spectrum).
Results/Discussion
In this study iron oxide nanoparticles synthesized at BAM and pre-characterized by DLS, SEM (including the transmission mode STEM-in-SEM) are presented. The particles are spherical and highly monodisperse with sizes slightly larger than 10 nm.
This poster presents the focused ion beam preparation methodologies developed within the framework of the EU funded EURAMET project ADVENT (Advanced Energy-Saving Technology).
It summarises the key breakthroughs achieved for various in situ investigation techniques, e.g. in situ experiments at the Synchrotron facility BESSY II (IR-SNOM and XRS), TEM and SMM instrumentation.
The created experimental devices from diverse thin-film semiconductor materials paved the way to dynamic structural studies bearing the potential to determine nanoscale correlations between strain and electric fields and, moreover, for the fundamental development of new in situ capabilities.