Anmelden

Open Access

  • Startseite
  • Suchen
  • Browsen
  • Veröffentlichen
  • Hilfe
  • Organisationseinheit der BAM

5 Werkstofftechnik

  • 5.0 Abteilungsleitung und andere (117) RSS-Feed abonnieren
  • 5.1 Materialographie, Fraktographie und Alterung technischer Werkstoffe (336) RSS-Feed abonnieren
  • 5.2 Experimentelle und modellbasierte Werkstoffmechanik (270) RSS-Feed abonnieren
  • 5.3 Mechanik der Polymerwerkstoffe (279) RSS-Feed abonnieren
  • 5.4 Keramische Prozesstechnik und Biowerkstoffe (135) RSS-Feed abonnieren
  • 5.5 Technische Keramik (137) RSS-Feed abonnieren
  • 5.6 Glas (192) RSS-Feed abonnieren

Filtern

Autor

  • Günster, Jens (6)
  • Zocca, Andrea (6)
  • Mühler, T. (3)
  • Barbosa, A. A. (1)
  • Bernardo, E. (1)
  • Bernardo, Enrico (1)
  • Bischoff, S. (1)
  • Borowski, J. (1)
  • Bossert, J. (1)
  • Brinkmann, O. (1)
+ weitere

Erscheinungsjahr

  • 2016 (15) (entfernen)

Dokumenttyp

  • Vortrag (9)
  • Zeitschriftenartikel (5)
  • Beitrag zu einem Tagungsband (1)

Sprache

  • Englisch (15) (entfernen)

Referierte Publikation

  • nein (10)
  • ja (5)

Schlagworte

  • additive manufacturing (6)
  • 3D printing (4)
  • Additive manufacturing (3)
  • Layerwise slurry deposition (3)
  • Bioceramics (2)
  • ceramics (2)
  • 3D (1)
  • Additive Manufacturing (1)
  • Bone marrow extrusion (1)
  • Brushite-forming calcium phosphate cement (1)
+ weitere

Organisationseinheit der BAM

  • 5.4 Keramische Prozesstechnik und Biowerkstoffe (15) (entfernen)

15 Treffer

  • 1 bis 10
  • CSV
  • RIS
  • 10
  • 20
  • 50
  • 100

Sortieren nach

  • Jahr
  • Jahr
  • Titel
  • Titel
  • Autor
  • Autor
Design of highly porous hydroxyapatite scaffolds by conversion of 3D printed gypsum structures – a comparison study (2016)
Dantas, A. ; Scalabrin, D. ; Farias, R. ; Barbosa, A. A. ; Ferraz, A. ; Wirth, Cynthia
Hydroxyapatite (HA) is a bioceramic material with excellent biological properties. However, these properties are strongly dependent of ist crystallinity degree, with high values of crystallinity associated to poor resorption rates and bioactivity. This work evaluates the properties of HA samples produced by two different free-forming conformation methods, CNC machining and 3D printing. In both cases, porous gypsum samples were produced and subsequently converted into HA in a reaction with di-ammonium hydrogen phosphate at 100°C and pH 8. A total conversion of the samples was achieved after 36 h independently of the conformation method used. The microstructure, however, before and after the conversion is showed to be dependent on the method used. After conversion the machined samples achieved a Maximum compressive strength of 3.5 MPaforporosities of circa 80%, while 3D printed samples achieved a tensile strength of 2.0 MPa by porosities of 61%.
LSD based additive manufacturing of ceramics (2016)
Günster, Jens
The production of ceramic parts by an additive manufacturing process is still a challenging task. Especially in powder-based technologies, such as 3D printing or laser sintering, the feedstock material is commonly spread out as thin layers of a dry powder/granulate by a roller or a shaker system. As consequence the layers are characterized mostly by a low packing rate. On the other hand, from a ceramic processing viewpoint, appreciable densities can be achieved by the use of ceramic slurries. In this context, the so-called Layer-wise Slurry Deposition (LSD) process has been developed. An overview about the LSD process and latest advances in the development of this technology will be presented.
Structural optimization of printed structures by self-organized relaxation (2016)
Zocca, Andrea ; Gomes, Cynthia ; Linow, Ulf ; Marx, Heidi ; Melcher, J ; Colombo, P ; Günster, Jens
Purpose – This paper aims to present an additive manufacturing-based approach in which a new strategy for a thermally activated local melting and material flow, which results in densification of printed structures, is introduced. Design/methodology/approach – For enabling this self-organized relaxation of printed objects by the viscous flow of material, two interconnected structures are printed simultaneously in one printing process, namely, Structure A actually representing the three dimensional object to be built and Structure B acting as a material reservoir for infiltrating Structure A. In an additional process step, subsequent to the printing job, an increase in the objects’ temperature results in the melting of the material reservoir B and infiltration of structure A. Findings – A thermally activated local melting of the polymethylsilsesquioxane results in densification of the printed structures and the local formation of structures with minimum surface area. Originality/value – The present work introduces an approach for the local relaxation of printed three-dimensional structures by the viscous flow of the printed material, without the loss of structural integrity of the structure itself. This approach is not restricted only to the materials used, but also offers a more general strategy for printing dense structures with a surface finish far beyond the volumetric resolution of the 3D printing process.
Decreased extrusion of calcium phosphate cement versus high viscosity PMMA cement into spongious bone marrow—an ex vivo and in vivo study in sheep vertebrae (2016)
Xin, L. ; Bungartz, M. ; Maenz, S. ; Horbert, V. ; Hennig, M. ; Illerhaus, Bernhard ; Günster, Jens ; Bossert, J. ; Bischoff, S. ; Borowski, J. ; Schubert, H. ; Jandt, K. ; Kunisch, E. ; Kinne, R. ; Brinkmann, O.
Vertebroplasty or kyphoplasty of osteoporotic vertebral fractures bears the risk of pulmonary cement embolism (3.5%–23%) caused by leakage of commonly applied acrylic polymethylmethacrylate (PMMA) cement to spongious bone marrow or outside of the vertebrae. Ultraviscous cement and specific augmentation systems have been developed to reduce such adverse effects. Rapidly setting, resorbable, physiological calcium phosphate cement (CPC) may also represent a suitable alternative. PURPOSE: This study aimed to compare the intravertebral extrusion of CPC and PMMA cement in an ex vivo and in vivo study in sheep. STUDY DESIGN/SETTING: A prospective experimental animal study was carried out. METHODS: Defects (diameter 5 mm; 15 mm depth) were created by a ventrolateral percutane-ous approach in lumbar vertebrae of female Merino sheep (2–4 years) either ex vivo (n = 17) or in vivo (n = 6), and injected with: (1) CPC (L3); (2) CPC reinforced with 10% poly(l-lactide-co-glycolide) (PLGA) fibers (L4); or (3) PMMA cement (L5; Kyphon HV-R). Controls were untouched (L1) or empty defects (L2). The effects of the cement injections were assessed in vivo by blood gas analysis and ex vivo by computed tomography (CT), micro-CT (voxel size: 67 µm), histology, and biomechanical testing.
Mechanistic Studies of Compacted and sintered rock salt (2016)
Swanson, C. ; Böhme, Susanne ; Günster, Jens
This chapter discusses different approaches for the densification of rock salt powders via compaction and sintering, focusing on the use of powder qualities obtained by crunching and milling of the natural rock salt. The chapter also examines the effect of compaction pressure, time and temperature on sintering of rock salt. Natural rock salt samples were crushed and milled in a disc mill to obtain fine powders in an experiment. The hot stage microscope allowed observing the in-situ volumetric shrinkage to be determined during the sintering process by measuring the area of the sample's projection in an optical setup by a CCD camera. Images were collected at a rate of 40 frames per minute. After the application of high pressures, the obtained samples are translucent and show the formation of macroscopic crack. Powder compacts prepared by uniaxial pressing, at different maximum pressures, were annealed at a constant heating rate (10 K min-1) to different maximum temperatures. These experiments were performed in a conventional sintering furnace under ambient atmosphere.
Selective laser sintering in combination with layerwise slurry deposition for the additive manufacture of sic ceramics (2016)
Günster, Jens
Selective laser sintering is a well-established technology for the additive manufacture of metallic and polymeric parts. For the additive manufacture of ceramic parts some examples for its successful application do exist, also. In this context, the selective laser sintering of SiC ceramic powders has been studied extensively in the past. Despite its low sintering activity, SiC is particularly suited for the selective laser sintering process, because of the possibility to form SiO2 at elevated temperatures in oxidizing ambient. The SiO2 formed can act as a binder within the laser sintering process. In the present work densely packed powder beds generated by the Layerwise Slurry Deposition (LSD) technology are selectively sintered by a cw. fiber laser. The layerwise slurry deposition is an innovative process for the deposition of layers in additive manufacturing. A slurry with no or very small organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition process, the ceramic particles settle to form thin layers of about 100 µm which have a high packing density (typical 55-60%). This high powder packing density is the result of a slip casting process: When a layer is deposited on a previously dried porous layer, the water is drawn into the pores by capillary forces. The LSD process therefore shares aspects of tape casting and slip casting. An additional benefit of the LSD technology is the free choice of the size of the ceramic particles used. Compared to the processing of dry flowable powders, especially small particles can be very well processed.
Layerwise slurry deposition of technical ceramics for Additive Manufacturing (2016)
Günster, Jens
The use of water based ceramic slurries as feedstock for the additive manufacture of ceramics has many advantages which are not fully exploit yet. In the layerwise slurry deposition (LSD) process a slurry with no or low organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle on the previously deposited and dried material to form thin layers with a high packing density (55-60%). The LSD therefore shares aspects both of tape casting and slip casting. The LSD differentiates from the classical powder-based AM layer deposition, which typically achieves with a flowable coarse grained powder a low packing density (35-50%) only, consequently hindering the ability of sintering ceramic parts to full density. The LSD is coupled with the principles of selective laser sintering (SLS) or binder jetting, to generate novel processes which take advantage of the possibility of achieving a highly dense powder-bed. Contrary to the LSD process, which requires drying of each individual layer, the direct interaction of ceramic slurries with intense laser radiation is a promising approach for the additive manufacture of ceramics, also. This presentation will provide a detailed discussion of the specific features of the slurry based processes, potentialities and issues connected to the layer deposition and describe the most recent developments in their application to technical ceramics.
Layerwise slurry deposition of technical ceramics for additive manufacturing (2016)
Zocca, Andrea
The layerwise slurry deposition (LSD) is an innovative process for the deposition of layers in AM. In the LSD, a slurry with no or low organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle to form thin layers with a high packing density (55-60%). The LSD therefore shares aspects both of tape casting and slip casting. The LSD differentiates from the classical powder-based AM layer deposition, which typically are able to achieve only a low packing density (35-50%), consequently hindering the ability of sintering ceramic parts to full density. The LSD is coupled with the principles of selective laser sintering (SLS) or binder printing, to generate novel processes which take advantage of the possibility of achieving a highly dense powder-bed. This presentation will describe the most recent developments in the application of the LSD to technical ceramics, in particular Al2O3 and SiC, discussing potential and issues connected to the layer deposition and the selective laser sintering of such layers.
Layerwise slurry deposition of technical ceramics: an approach for dense powder-beds in additive manufacturing (2016)
Zocca, Andrea
Several Additive Manufacturing (AM) processes are based on the deposition of a powder to form a powder-bed layer-by-layer which typically has a low packing density (35-50%) and consequently hinders the ability of sintering ceramic parts to full density. The layerwise slurry deposition (LSD) is an innovative process for the deposition of layers in AM. In the LSD, a slurry with no or small organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle to form thin layers with a high packing density (55-60%). When coupled with a printing head or with a laser, the LSD enables novel AM technologies inspired to the 3D printing or selective laser sintering, but taking advantage of having a highly dense powder-bed. This approach has been successfully applied to silicate ceramics, but implementing technical ceramic slurries is more challenging, because the water is drained too quickly from the suspension into the pores of the previous porous layer forming a cast. In this presentation, the variables involved in the LSD will be analyzed and the latest improvements in the deposition setup will be described. The application of the LSD to technical ceramics has the potential of generating additive manufacturing parts which in the green state are comparable to those produced by slip casting.
Layerwise slurry deposition: an approach for dense powder-beds in additive manufacturing and its application to technical ceramics (2016)
Zocca, Andrea
Several Additive Manufacturing (AM) processes are based on the deposition of a powder to form a powder-bed layer-by-layer which typically has a low packing density (35-50%) and consequently hinders the ability of sintering ceramic parts to full density. The layerwise slurry deposition (LSD) is an innovative process for the deposition of layers in AM. In the LSD, a slurry with no or small organic content is repetitively spread as thin layers on each other by means of a doctor blade. During the deposition, the ceramic particles settle to form thin layers with a high packing density (55-60%). When coupled with a printing head or with a laser, the LSD enables novel AM technologies inspired to the 3D printing or selective laser sintering, but taking advantage of having a highly dense powder-bed. This approach has been successfully applied to silicate ceramics, but implementing technical ceramic slurries is more challenging, because the water is drained too quickly from the suspension into the pores of the previous porous layer. In this presentation, the variables involved in the LSD will be analyzed and the latest improvements in the deposition setup will be described. The application of the LSD to technical ceramics has the potential of generating additive manufacturing parts which in the green state are comparable to those produced by slip casting.
  • 1 bis 10

OPUS4 Logo

  • Kontakt
  • Impressum
  • Sitelinks