5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (56)
- Zeitschriftenartikel (54)
- Posterpräsentation (21)
- Buchkapitel (1)
- Beitrag zu einem Tagungsband (1)
- Sonstiges (1)
Sprache
- Englisch (134) (entfernen)
Schlagworte
- Glass (34)
- Sintering (16)
- Crystallization (15)
- Crack growth (12)
- Water speciation (9)
- DCB (8)
- Soda-lime silicate glass (7)
- Water content (7)
- Foaming (6)
- Robotic melting (6)
- Vickers (6)
- EBSD (5)
- Vickers indentation (5)
- Viscosity (5)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Bioactive glass (4)
- Glas (4)
- Internal friction (4)
- Ontology (4)
- Orientation (4)
- Surface energy (4)
- Workflow (4)
- Coating (3)
- Corrosion (3)
- Crack healing (3)
- Crystal orientation (3)
- Data Space (3)
- Diopside (3)
- Fracture Toughness (3)
- Glass ceramic (3)
- Glass powder (3)
- NMR spectroscopy (3)
- Oxide Glasses (3)
- Scintillators (3)
- Silicate Glasses (3)
- Simulation (3)
- Surface crystallization (3)
- Al2O3 (2)
- Aluminosilicate glasses (2)
- Bioactive Glass (2)
- Bond energy (2)
- Diffusion coefficient (2)
- Diopsid (2)
- Elastic constants (2)
- Fluoride phosphate glasses (2)
- Fracture surface energy (2)
- Gender gap (2)
- Geothermal (2)
- Glass Digital (2)
- Glass composition (2)
- Glass transition (2)
- Glass-ceramic (2)
- Hydrogen permeation (2)
- IR (2)
- Infrared spectroscopy (2)
- Ionic porosity (2)
- Lead borate glasses (2)
- Martensitic steel (2)
- Mechanical properties (2)
- Microhardness (2)
- Microstructure (2)
- Multifunctional nanoparticles (2)
- Nanoparticles (2)
- Ontologie (2)
- Oriented surface crystallization (2)
- Permeability (2)
- Powder (2)
- Raman spectroscopy (2)
- Relaxation (2)
- SEM (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver-glass-metallization-paste (2)
- Soda-lime-silica glass (2)
- Sol-gel coating (2)
- Solubility (2)
- Stress intensity factor (2)
- Superconducting magnet (2)
- Surface Energy (2)
- Surface nucleation (2)
- Upconversion (2)
- 3D etching (1)
- 3D glass structure model (1)
- 3D printing (1)
- Acid-leaching (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alumina coatings (1)
- Analytical scanning electron microscopy (1)
- Artificial weathering (1)
- Atomic packing factor (1)
- Automated analysis (1)
- BTS (1)
- Batch reactions (1)
- Behmite (1)
- Bioactive (1)
- Blähen (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bubble formation (1)
- Calculated intrinsic fracture toughness (1)
- CdTe quantum dots (1)
- Cement (1)
- Ceramic multilayers (1)
- Co-firings (1)
- Coefficient of thermal expansion (1)
- Composite materials (1)
- Concrete (1)
- Crack growth in air (1)
- Crosslinking (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Cytocompatibility (1)
- DCB geometry (1)
- Data space (1)
- Degradation (1)
- Density (1)
- Dental ceramics (1)
- Differential scanning calorimetry (1)
- Diffusion (1)
- Diffusivity (1)
- Digital Twin (1)
- Digitalization (1)
- Dissolved water (1)
- Dynamic mechanical analysis (1)
- Dynamisch Mechanische Analyse (1)
- EPR (1)
- Efficiency (1)
- Epoxy resin (1)
- Exposed metal sites (1)
- FT-IR (1)
- Facilitated activation (1)
- Female noble prize winners (1)
- Ferrous phosphate hydrate (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Fracture Mechanics (1)
- Fracture surface (1)
- Fracture toughness (1)
- Fragility (1)
- Fresnoit (1)
- Fresnoite (1)
- Gas permeation (1)
- Gasabgabe (1)
- Gasgehalt (1)
- Gd3+ (1)
- General Chemistry (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass scintillator (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Glasses (1)
- Growth kinetics (1)
- Growth rate (1)
- Heißgasextraktion (1)
- High energy radiation (1)
- High pressure (1)
- High pressure gas storage (1)
- High temperature (1)
- High temperature corrosion (1)
- High-temperature corrosion (1)
- High-temperature oxidation (1)
- Host-guest hybrid materials (1)
- Hot stage microscopy (1)
- Hydrogen diffusivity (1)
- Hydrogen gas (1)
- Hydrogen permeability (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrous glass (1)
- IR spectroscopy (1)
- In situ synthesis (1)
- Inconel 625 (1)
- Indentation fracture toughness (1)
- Internal stresses (1)
- Ion beam erosion Sectioning (1)
- JMAK model (1)
- Kristallisation (1)
- Limestone Filler (1)
- Long-term calculation (1)
- Low expansion (1)
- MOF-74 (1)
- Martensitic steels (1)
- Master curve (1)
- Material Digital (1)
- Materials Chemistry (1)
- Materials Data Space (1)
- Mechanical Engineering (1)
- Mechanics of Materials (1)
- Metallic silver precipitates (1)
- Metals and Alloys (1)
- Metformin (1)
- Milling (1)
- Mixed-linkers (1)
- Modeling (1)
- Moisture (1)
- NMR (1)
- Nb3Sn (1)
- Noble metal nanoparticles (1)
- Non-desired foaming (1)
- Nucleation (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Nydrogen melting (1)
- Optical properties (1)
- Optical properties of glasses and ceramics (1)
- Optical spectroscopy (1)
- Optical tweezers (1)
- Oxidation protection (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxidglas (1)
- Oxyfuel (1)
- PMD (1)
- Particle Size Distribution (1)
- Persistent luminescence (1)
- Persistent luminescent (1)
- Phase Separation (1)
- Phase separation (1)
- Phase transformations (1)
- Phosphate (1)
- Phosphors (1)
- Photocatalysis (1)
- Photodynamic therapy (1)
- Photovoltaic modules (1)
- Physical properties (1)
- Plasmon enhancement (1)
- Polymer (1)
- Polyurethane (1)
- Precipitation (1)
- Property simulation (1)
- Protective coating (1)
- Quantum dots (1)
- Radiation-matter interaction (1)
- Raman (1)
- Real time growth control (1)
- Reference Material (1)
- Relaxationsphänomene (1)
- Resonance testing (1)
- Rheology (1)
- Risswachstum (1)
- Robot-assisted galss melting (1)
- Robotic glass melting (1)
- Robotische Glasschmelzanlage (1)
- Roughness (1)
- Sample preparation (1)
- Sand blasting (1)
- Scaffolds (1)
- Sensing (1)
- Shear thinning (1)
- Silicate glass (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Sinter retardation (1)
- Sintering atmosphere (1)
- Sintern (1)
- Slow crack growth (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Spectroscopy (1)
- Stable crack growth (1)
- Steel (1)
- Steel P92 (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural defects (1)
- Structure (1)
- Structure property correlations (1)
- Structure-property correlation (1)
- Subcritical crack growth (1)
- Supersaturation (1)
- Surface Nucleation (1)
- Surface roughness (1)
- Synchrotron micro-tomography (1)
- TEM (1)
- Tb3+ (1)
- Theranostics (1)
- Thermal expansion (1)
- Thermo-optical measurement (1)
- Thermoanalytical Methods (1)
- Toughness (1)
- Transmission electron microscopy (1)
- Transmittance (1)
- Upconversion nanoparticles (1)
- Vacuum hot extraction (1)
- Viscose sintering (1)
- Viscous sintering (1)
- Vivianite (1)
- Volume Fraction (1)
- Volume changes (1)
- Wasser (1)
- Water (1)
- Water in glass (1)
- White light emitters (1)
- Women in science (1)
- X-ray diffraction (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- high pressure (1)
- hydrogen storage (1)
- infrared spectroscopy (1)
- phosphate glasses (1)
- water speciation (1)
Organisationseinheit der BAM
- 5.6 Glas (134) (entfernen)
To explore the impact of ambient and structural water on static fatigue, the initiation and growth of 3279 Vickers induced median radial cracks were automatically recorded and analyzed. We find that humidity is more efficient in initiating cracks and promoting their growth than water, which is dissolved in the glass structure. In particular for slow crack growth (< 3x10-6 m s-1), tests in dry nitrogen showed a considerable decrease in the crack growth exponent with increasing water content of the glasses. On the other hand, if tests were performed in humid air, the crack growth exponent was independent of the water content of the hydrous glasses, while stress intensity decreased slightly. These observations indicate that water promotes the processes at the crack-tip regardless of its origin. However, ambient water is more efficient.
High conductive silver-glass-metallization-pastes are key components in photovoltaics and advanced microelectronics. However, the underlying mechanisms of liquid phase sintering as silver dissolution, diffusion and reprecipitation are poorly understood so far.
In the current work, the influence of different network modifier in alkali-zinc-borate paste-glasses on liquid phase sintering of silver-glass-composites was studied. Therefore, silver-glass-composites containing 30 vol% glass were prepared, using low melting X2O-ZnO-B2O3 glasses with X = Na, Li, and Rb (NZB, LZB, and RZB). Glass transition temperature, viscosity, glass-silver wetting, crystallization and sintering behavior was studied by means of thermal analysis, dilatometry, heating microscopy and microscopy.
Similar glass transition temperatures of 450 °C (RZB), 460 °C (LZB) and 465 °C (NZB) were found by means of thermal analysis for glasses under study. Also, all glasses have a similar crystallization onset at about 550 °C, even though exhibiting with a different degree of crystallization.
Despite these similarities, however, the sintering behavior, measured in terms of area shrinkage, significantly differs for the composites. This finding indicates a different degree of silver dissolution. Assuming that dissolved silver reduces the viscosity, this effect could explain why glass crystallization starts at lower temperature in the composites. For example, the crystallization peak of LZB at 629 °C measured for pure glass powder compacts was decreased to 586 °C for the composite. Confirmatively, microstructure analyses indicate different degrees of silver dissolution, as e.g. revealed by different amount of silver precipitates within the residual glass phase, and reprecipitation. Best silver dissolution appeared for the RZB glass. Nevertheless, the final densification of RZB was retarded probably due to swelling and crystallization.
To understand the influence of water and alkalis on aluminosilicate glasses, three polymerized glasses with varying ratios of Na/K were synthesized [(22. 5-x)Na2O-xK2O-22.5 Al2O3-55 SiO2 with x = 0, 7.5, and 11.25]. Subsequently, these glasses were hydrated (up to 8 wt% H2O) in an internally heated gas pressure vessel. The density of hydrous glasses linearly decreased with water content above 1 wt%, consistent with the partial molar volume of H2O of 12 cm3/mol. Near-infrared spectroscopy revealed that hydroxyl groups are the dominant species at water content of <4 wt%, and molecular water becomes dominating at water content of >5 wt%. The fraction of OH is particularly high in the pure Na-bearing glass compared to the mixed alkali glasses. 27Al magic angle spinning-NMR spectroscopy shows that aluminum is exclusively fourfold coordinated with some variations in the local geometry. It appears that the local structure around Al becomes more ordered with increasing K/Na ratio. The incorporation of H2O reinforces this effect. The differential thermal analysis of hydrous glasses shows a significant mass loss in the range of glass transition already during the first upscan, implying the high mobility of water in the glasses. This observation can be explained by the open structure of the aluminosilicate network and by the low dissociation enthalpy of H2O in the glasses (≈ 8 kJ/mol). The effect of the dissolved H2O on the glass transition temperature is less pronounced than for other aluminosilicate glasses, probably because of the large fraction of Al in the glasses.
In the past few years, a new phase, Ba0.5Sr0.5Zn2Si2O7 with negative thermal expansion has been described in the literature. Some excess of SiO2 is necessary to produce glasses from which the Ba0.5Sr0.5Zn2Si2O7 phase can be crystallized.
Unfortunately, in such glasses usually surface crystallization occurs; however, the addition of nucleating agents such as trace quantities of platinum or relatively high quantities of ZrO2 is necessary to achieve bulk nucleation. These additional components also affect the crystal growth velocity, which furthermore is different for crystal growth from the surface and in the bulk. In this paper, three different chemical compositions containing different ZrO2 concentrations, where one composition additionally contains 100 ppm platinum, are studied with respect to their crystallization behaviour. Although the compositions do not differ much, the crystallization behaviour and also the Crystal growth velocities are surprisingly different.
Stable crack growth was measured for nominal dry and water-bearing (6 wt%) soda-lime silicate glasses in double cantilever beam geometry and combined with DMA studies on the effects of dissolved water on internal friction and glass transition, respectively. In vacuum, a decreased slope of logarithmic crack growth velocity versus stress intensity factor is evident for the hydrous glass in line with an increase of b-relaxation intensity indicating more energy Dissipation during fracture. Further, inert crack growth in hydrous glass is found to be divided into sections of different slope, which indicates different water related crack propagation mechanism. In ambient air, a largely extended region II is observed for the hydrous glass, which indicates that crack growth is more sensitive to ambient water.
Accelerator magnets that can reach magnetic fields well beyond the Nb-Ti performance limits are presently being built and developed, using Nb3Sn superconductors. This technology requires reaction heat treatment (RHT) of the magnet coils, during which Nb3Sn is formed from its ductile precursor materials (a “wind and react” approach). The Nb3Sn microstructure and microchemistry are strongly influenced by the conductor fabrication route, and by the Phase changes during RHT. By combining in situ differential scanning calorimetry, high Energy synchrotron x-ray diffraction, and micro-tomography experiments, we have acquired a unique data set that describes in great detail the phase and microstructure changes that take place during the processing of restacked rod process (RRP), powder-in-tube (PIT), and internal tin (IT) Nb3Sn wires. At temperatures below 450 ° the phase evolutions in the three wire types are similar, with respectively solid state interdiffusion of Cu and Sn, Cu6Sn5 formation, and Cu6Sn5 peritectic transformation. Distinct differences in phase evolutions in the wires are found when temperatures exceed 450 °C. The volume changes of the conductor during RHT are a difficulty in the production of Nb3Sn accelerator magnets. We compare the wire diameter changes measured in situ by dilatometry with the phase and void volume evolution of the three types of Nb3Sn wire. Unlike the Nb3Sn wire length changes, the wire diameter evolution is characteristic for each Nb3Sn wire type. The strongest volume increase, of about 5%, is observed in the RRP wire, where the main diameter increase occurs above 600 °C upon Nb3Sn formation.
Glass
(2019)
Overview about the key activities of division 5.6 glass and the diversity of the material glass. For the vacuum hot extraction method (VHE-MS) some examples are presented e. g. for the measurement of water content or the determination of diffusion coefficient of hydrogen in glasses. Finally, an outlook is shown on the robot controlled glass screening device which will be available next year.
Morphologies of Fresnoite surface crystals of BT0.75S glass under different atmospheric conditions
(2019)
Fresnoite glass-ceramics are characterized by piezoelectric, pyroelectric and non-linear optical properties. These properties can be adjusted by orienting the fresnoite crystals during crystallization. Crystallization begins at the surface. The first surface crystals are not oriented perpendicular and, therfore, produce a surface layer that has not the intended properties. To overcome this issue, the formation of fresnoite surface crystals at different atmospheric conditions was studied.