5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (69)
- Zeitschriftenartikel (54)
- Posterpräsentation (25)
- Buchkapitel (1)
- Beitrag zu einem Tagungsband (1)
- Sonstiges (1)
Sprache
- Englisch (134)
- Deutsch (16)
- Mehrsprachig (1)
Schlagworte
- Glass (38)
- Crystallization (16)
- Sintering (16)
- Crack growth (12)
- DCB (9)
- Glas (9)
- Water speciation (9)
- Ontologie (7)
- Soda-lime silicate glass (7)
- Vickers (7)
- Water content (7)
- Foaming (6)
- Robotic melting (6)
- Simulation (6)
- EBSD (5)
- Ontology (5)
- Vickers indentation (5)
- Viscosity (5)
- Workflow (5)
- Alkali ions (4)
- Alkali zinc borate glasses (4)
- Bildanalyse (4)
- Bioactive glass (4)
- Data Space (4)
- Internal friction (4)
- Orientation (4)
- Oxidglas (4)
- Surface energy (4)
- Coating (3)
- Corrosion (3)
- Crack healing (3)
- Crystal orientation (3)
- Digitaler Zwilling (3)
- Diopside (3)
- Fracture Toughness (3)
- Glass ceramic (3)
- Glass powder (3)
- ML (3)
- NMR spectroscopy (3)
- Oxide Glasses (3)
- Scintillators (3)
- Silicate Glasses (3)
- Surface crystallization (3)
- Wasser (3)
- Al2O3 (2)
- Aluminosilicate glasses (2)
- Bioactive Glass (2)
- Bond energy (2)
- Diffusion (2)
- Diffusion coefficient (2)
- Diopsid (2)
- Elastic constants (2)
- Fluoride phosphate glasses (2)
- Fracture surface energy (2)
- Gender gap (2)
- Geothermal (2)
- Glass Digital (2)
- Glass composition (2)
- Glass transition (2)
- Glass-ceramic (2)
- Hydrogen permeation (2)
- IR (2)
- Infrared spectroscopy (2)
- Ionic porosity (2)
- Lead borate glasses (2)
- Martensitic steel (2)
- Material Digital (2)
- Mechanical properties (2)
- Microhardness (2)
- Microstructure (2)
- Multifunctional nanoparticles (2)
- Nanoparticles (2)
- Oriented surface crystallization (2)
- Permeability (2)
- Powder (2)
- Raman spectroscopy (2)
- Relaxation (2)
- Risswachstum (2)
- Robotische Glasschmelzanlage (2)
- Robotische Schmelzanlage (2)
- SEM (2)
- Silver diffusion (2)
- Silver metallization paste (2)
- Silver-glass-metallization-paste (2)
- Sintern (2)
- Soda-lime-silica glass (2)
- Sol-gel coating (2)
- Solubility (2)
- Stress intensity factor (2)
- Superconducting magnet (2)
- Surface (2)
- Surface Energy (2)
- Surface nucleation (2)
- Upconversion (2)
- robotische Glasschmelzanlage (2)
- 3D REM (1)
- 3D etching (1)
- 3D glass structure model (1)
- 3D printing (1)
- Acid-leaching (1)
- Alkali aluminosilicate glasses (1)
- Alkali and alkaline earth silicate and borate glass (1)
- Alkali zinc borate glass (1)
- Alumina coatings (1)
- Analytical scanning electron microscopy (1)
- Artificial weathering (1)
- Atomic packing factor (1)
- Automated analysis (1)
- BCS (1)
- BTS (1)
- Batch reactions (1)
- Behmite (1)
- Bioactive (1)
- Blähen (1)
- Borate (1)
- Borate glasses (1)
- Borosilicate glass (1)
- Brittle fracture (1)
- Brownian motion (1)
- Bruchflächen (1)
- Bubble formation (1)
- Calculated intrinsic fracture toughness (1)
- CdTe quantum dots (1)
- Cement (1)
- Ceramic multilayers (1)
- Co-firings (1)
- Coefficient of thermal expansion (1)
- Composite materials (1)
- Concrete (1)
- Crack growth in air (1)
- Crosslinking (1)
- Crystal growth (1)
- Crystal growth velocity (1)
- Crystal lattice (1)
- Crystal morphology (1)
- Cytocompatibility (1)
- DCB geometry (1)
- Data space (1)
- Degradation (1)
- Density (1)
- Dental ceramics (1)
- Differential scanning calorimetry (1)
- Diffusivity (1)
- Digital Twin (1)
- Digitalisierung (1)
- Digitalization (1)
- Dissolved water (1)
- Dynamic mechanical analysis (1)
- Dynamisch Mechanische Analyse (1)
- EPR (1)
- Efficiency (1)
- Epoxy resin (1)
- Exposed metal sites (1)
- FT-IR (1)
- Facilitated activation (1)
- Female noble prize winners (1)
- Ferrous phosphate hydrate (1)
- Flow Coefficient (1)
- Fluorescence spectroscopy (1)
- Formerkennung (1)
- Fracture Mechanics (1)
- Fracture surface (1)
- Fracture toughness (1)
- Fragility (1)
- Fraktographie (1)
- Fresnoit (1)
- Fresnoite (1)
- Gas permeation (1)
- Gasabgabe (1)
- Gasgehalt (1)
- Gd3+ (1)
- Gefüge (1)
- General Chemistry (1)
- GlasDigital (1)
- Glasmatrixkomposit (1)
- Glass Ceramic (1)
- Glass capillaries (1)
- Glass crystallization stress (1)
- Glass forming melts (1)
- Glass liner (1)
- Glass manufacturing (1)
- Glass matrix composite (1)
- Glass melt (1)
- Glass melting (1)
- Glass scintillator (1)
- Glass screening device (1)
- Glass structure (1)
- Glass transformation temperature (1)
- Glass-ceramics definition (1)
- Glasses (1)
- Grenzflächenenergie (1)
- Growth kinetics (1)
- Growth rate (1)
- Heißgasextraktion (1)
- High energy radiation (1)
- High pressure (1)
- High pressure gas storage (1)
- High temperature (1)
- High temperature corrosion (1)
- High-temperature corrosion (1)
- High-temperature oxidation (1)
- Hochtemperatur (1)
- Hochtemperaturbrennstoffzelle (1)
- Host-guest hybrid materials (1)
- Hot stage microscopy (1)
- Hydrogen diffusivity (1)
- Hydrogen gas (1)
- Hydrogen permeability (1)
- Hydrogen storage (1)
- Hydrogen storage tank (1)
- Hydrous glass (1)
- IR spectroscopy (1)
- In situ synthesis (1)
- Inconel 625 (1)
- Indentation fracture toughness (1)
- Internal stresses (1)
- Ion beam erosion Sectioning (1)
- JMAK model (1)
- Kristallisation (1)
- Kristallorientierung (1)
- Limestone Filler (1)
- Long-term calculation (1)
- Low expansion (1)
- MOF-74 (1)
- Martensitic steels (1)
- Master curve (1)
- Materials Chemistry (1)
- Materials Data Space (1)
- Mechanical Engineering (1)
- Mechanics of Materials (1)
- Metallic silver precipitates (1)
- Metals and Alloys (1)
- Metformin (1)
- Milling (1)
- Mixed-linkers (1)
- Modeling (1)
- Moisture (1)
- NMR (1)
- Nb3Sn (1)
- Noble metal nanoparticles (1)
- Non-desired foaming (1)
- Nucleation (1)
- Nucleation mode (1)
- Nucleation tendency (1)
- Nydrogen melting (1)
- Oberflächenkeimbildung (1)
- Optical properties (1)
- Optical properties of glasses and ceramics (1)
- Optical spectroscopy (1)
- Optical tweezers (1)
- Oxidation protection (1)
- Oxide coatings (1)
- Oxide glass (1)
- Oxyfuel (1)
- PMD (1)
- Particle Size Distribution (1)
- Peem (1)
- Persistent luminescence (1)
- Persistent luminescent (1)
- Phase Separation (1)
- Phase separation (1)
- Phase transformations (1)
- Phosphate (1)
- Phosphors (1)
- Photocatalysis (1)
- Photodynamic therapy (1)
- Photovoltaic modules (1)
- Physical properties (1)
- Plasmon enhancement (1)
- Polymer (1)
- Polyurethane (1)
- Precipitation (1)
- Property simulation (1)
- Protective coating (1)
- Quantum dots (1)
- Radiation-matter interaction (1)
- Raman (1)
- Real time growth control (1)
- Reference Material (1)
- Relaxationsphänomene (1)
- Resonance testing (1)
- Rheology (1)
- Rissheilung (1)
- Robot-assisted galss melting (1)
- Roboter (1)
- Robotic glass melting (1)
- Roughness (1)
- Sample preparation (1)
- Sand blasting (1)
- Scaffolds (1)
- Sensing (1)
- Shear thinning (1)
- Silber (1)
- Silicate glass (1)
- Silicatglas (1)
- Silicoborate glasses (1)
- Silver (1)
- Silver cluster (1)
- Silver glass paste (1)
- Silver precipitates (1)
- Silver-glass metallization paste (1)
- Sinter retardation (1)
- Sintering atmosphere (1)
- Sinterung (1)
- Slow crack growth (1)
- Soda lime silicate glass (1)
- Soda-lime-silica (1)
- Sodium ion batteries (1)
- Sodium zinc borate glass (1)
- Sodiumborosilicate glasses (1)
- Spectroscopy (1)
- Stable crack growth (1)
- Steel (1)
- Steel P92 (1)
- Stress intensity (1)
- Stress-corrosion (1)
- Stress-strain behavior (1)
- Stress-strain-behavior (1)
- Structural defects (1)
- Structure (1)
- Structure property correlations (1)
- Structure-property correlation (1)
- Struktur (1)
- Subcritical crack growth (1)
- Supersaturation (1)
- Surface Nucleation (1)
- Surface roughness (1)
- Synchrotron (1)
- Synchrotron micro-tomography (1)
- TEM (1)
- Tb3+ (1)
- Theranostics (1)
- Thermal expansion (1)
- Thermo-optical measurement (1)
- Thermoanalytical Methods (1)
- Toughness (1)
- Transmission electron microscopy (1)
- Transmittance (1)
- Upconversion nanoparticles (1)
- Vacuum hot extraction (1)
- Viscose sintering (1)
- Viscous sintering (1)
- Vivianite (1)
- Volume Fraction (1)
- Volume changes (1)
- Water (1)
- Water in glass (1)
- White light emitters (1)
- Women in science (1)
- X-ray diffraction (1)
- XRM (1)
- Young`s modulus (1)
- Young´s Modulus (1)
- Young´s modulus (1)
- Young’s Modulus (1)
- high pressure (1)
- hydrogen storage (1)
- infrared spectroscopy (1)
- phosphate glasses (1)
- water speciation (1)
Organisationseinheit der BAM
- 5.6 Glas (151) (entfernen)
Ambient water influences sub-critical crack growth (SCCG) from microscopic surface flaws, leading to stress corrosion at the crack tip. The complex influence of humidity accelerating slow crack propagation (region I) is well studied only for dry commercial NCS glass (< 1000 ppm water). To shed light on this influence, the effect of water is mimicked by studying SCCG water-bearing glasses. For this purpose, water-bearing silicate glasses of 8 wt% total water were synthesized at 0.5 GPa and compared to dry glasses. SCCG was measured in double cantilever beam geometry. For dry glasses, 3 trends in crack velocity vs. stress intensity, KI, curve were found. The slope in region I increases in the order NCS < NBS < BaCS < NZnS < NAS glass. The velocity range of region II, reflecting the transition between corrosion affected and inert crack growth (region III), varies within one order of magnitude among these glasses. The KI region of inert crack growth strongly scatters between 0.4 and 0.9 MPam0.5. For hydrous glasses, it is found that water strongly decreases Tg, form a new sub-Tg internal friction peak caused by molecular water, and makes the glasses more prone to SCCG. The observed trends will be discussed in terms of the effects of Youngs Modulus on the strain energy release rate and energy dissipation related to mechanical glass relaxation phenomena.
Characterization of early crystallization stages in surface-crystallized diopside glass-ceramics
(2019)
Structure formation in glass-ceramics by means of surface crystallization is a challenging open question and remains elusive to definite answers. In several glass-ceramic systems, oriented crystal layers have been observed at the immediate surface, including diopside and some fresnoite systems. However, it is still open to debate, whether oriented surface crystallization is the result of oriented nucleation or growth selection effects. In the same vein, there is still discussion whether surface nucleation is governed by surface chemistry effects or by defects serving as active nucleation sites.
In order to help answer these questions, annealing experiments at 850°C have been performed on a MgO·CaO·2SiO2 glass, leading to the crystallization of diopside at the surface. Different annealing durations and surface treatment protocols (i.a. lapping with diamond slurries between 16 µm and 1 µm grain size) have been applied. Particular focus has been put on earliest crystallization stages, with crystal sizes down to about 200 nm. The resultant microstructure has been analyzed by electron backscatter diffraction (EBSD) and two different kinds of textures have been observed, with the a- or b-axis being perpendicular to the sample surface and the c-axis lying in the sample plane. Even at shortest annealing durations, a clear texture was present in the samples. Additionally, selected samples have been investigated with energy-dispersive x-ray spectroscopy in the scanning transmission electron microscope (STEM-EDX). The diopside crystals have been found to exhibit distinguished submicron structure variations and the glass around the crystals was shown to be depleted of Mg.
Fresnoite glass with excess SiO2 exhibits oriented surface crystallization, in contrast to the stoichiometric glass composition. Recent EBSD studies documented that the crystals in BTS (2BaO-TiO2-xSiO2, x=0-3) can occur in a distinct [101]-orientation perpendicular to the surface and claimed that this orientation is not a result of growth selection. During these previous studies, however, the effect of surface preparation and surrounding atmosphere during the crystallization experiments were not considered. As these parameters may influence crystal orientation, we studied the surface crystallization of a BTS glass (2BaO-TiO2–2.75SiO2) under controlled conditions with the help of light, electron and polarisation microscopy as well as EBSD. Heat treatments for one hour at 840°C of fractured BTS glass surfaces in air resulted in a large number of not-separable surface crystals. This large number of crystals can be caused by dust particles, which act as nucleation agents. As crystal growth velocity could further be influenced by humidity, our experiments are performed in a filtered and dried air atmosphere. The crystal morphology and orientation will be analysed in dependence of the sample preparation and a differing surrounding atmosphere.
Increasing Exposed Metal Site Accessibility in a Co-MOF-74 Material With Induced Structure-Defects
(2019)
Metal-organic frameworks (MOFs) are promising nanoporous materials with many practical applications. This owes largely to their remarkable porosity and the presence of specific chemical functionalities, such as exposed metal sites (EMS). The MOF-74 structure is known for exhibiting one of the highest EMS densities among porous materials. Moreover, the inclusion of structural defects has been proposed to enhance activity further. This was previously achieved by mixing the original linker together with a second one, having lower topology. The presence of structural defects was evidenced by the resulting crystalline properties and thermal stability. In this work, different mixtures of tetratopic 2,5-dihydroxyterephthalic acid with up to 60% of the tritopic hydroxyterephtalic acid were used to synthesize crystalline Co-MOF-74-like materials. Materials synthesized from higher proportions than 30% of hydroxyterephtalic acid in the synthesis media collapse upon partial removal of the solvent molecules. This indicates the presence of structural defects and the importance of the solvent molecules in stabilizing the crystalline structures. Electron microscope images show that crystal size reduces with inclusion of hydroxyterephtalic acid as the second linker. The presence of coordinated solvent molecules at the EMS was evaluated by Fourier-transform infrared spectra (FTIR) spectroscopy, so that a higher degree of solvent-exchange was observed during washing for defective structures. Furthermore, TG analysis suggests defective structures exhibit lower desolvation temperatures than the defect-free structures. Finally, N2 adsorption-desorption analyses at −196°C showed an enhanced accessibility of the gas to the inner porosity of the defective structures and therefore, the EMS of the material. All these finding make this pathway interesting to enhance the potential interest of these materials for an industrial application because of both a facilitated activation and a better access to the active sites.
High conductive silver metallization pastes are key components in advanced electronics and photovoltaics. Increasing demands on efficiency, miniaturization and ever shorter time-to-market require tailored glass-silver-pastes. In these pastes, low-melting glasses act as a sintering aid achieving better sintering, adhesion and contact formation for solar cells. Yet, the related liquid phase sintering of silver-glass-composites and the underlying mechanism of silver dissolution, transport and reprecipitation are rarely investigated. In this study, systematically varied low melting alkaline zinc borate, alkaline earth borate, and Pb- and Bi-glasses are investigated. Glass transition and crystallization are studied with dilatometry, DTA and XRD. Sintering of the pure glasses, pure silver and silver-glass-composites is analyzed with Hot Stage Microscopy, optical and electron microscopy. Since oxygen dissolved in silver powders can affect the silver dissolution as silver oxide in the matrix oxide glasses, the O2-content of silver powders is determined by Vacuum Hot Extraction. The glass transition temperature of the glasses under study varies between 370 °C and 590 °C whereas the sinter onset largely ranges between 400 °C and 600 °C. On the other hand, it scattered between 200 °C and 450 °C for selected commercial Ag-powders of different particle size and morphology.
The effect of structural water on density, elastic constants and microhardness of water-bearing soda-lime-silica glasses of up to 21.5 mol% total water is studied. It is found that the Poisson ratio and the water content are positively correlated, while density and the elastic moduli decrease with increasing water content. Vickers hardness decreases by approximately 27% from the dry to the most hydrous glass. For water fractions <3 mol%, the dependencies are non-linear reflecting the non-linear change in the concentrations of OH and H2O molecules dissolved, whereas for water fractions >3 mol% linear dependencies are found. To distinguish the effect of structural water and environmental water, indentations were performed in toluene, nitrogen gas and air. Timedependent softening was evident for testing dry glasses in humid atmospheres as well as for tests of hydrous glasses in dry atmospheres. This indicates that the response times of dissolved water species are effectively equal in both scenarios.
To understand the impact of dissolved water on structure and properties, four boron-rich glasses of molar compositions 15-x Na2O x CaO 15 SiO2 70 B2O3 (with x=0, 7.5, 10) and 10 Na2O 15 SiO2 75 B2O3 were prepared and subsequently hydrated (up to 8 wt% H2O). Density measurements show a non-linear trend upon hydration implying large structural changes in particular at water contents<2 wt%. Near-infrared spectroscopy shows hydroxyl groups are the dominant species in all glasses upon the entire range of water content. Molecular H2O is detectable only at total water contents>2 wt%. 11B MAS NMR spectra show that the abundance of BO4 species is mainly controlled by ratio of (Na2O+CaO)/B2O3 while incorporation of water plays a minor role.
Compared to borate glasses, the efficiency of formation of BO4 tetrahedra is favored by crosslinking of the network by SiO4-units. The glass transition temperatures, determined by differential thermal analysis, decreases continuously with water content due to breakage of B-O-B bonds by hydrolysis. However, compared to Silicates and aluminosilicates, the effect of dissolved water is less pronounced which can be explained by weaker B-O-B bonds in comparison to Si-O-Si bonds.
Polyether and -ester urethanes (PU) were exposed to artificial weathering at 40 °C and artificial UV radiation in a weathering chamber. In 3 parallel exposures, humidity was varied between dry, humid, and wet conditions. Material alteration was investigated by various analytical techniques like size exclusion chromatography
(SEC), liquid chromatography-infrared spectroscopy (LC-FTIR), thermal-desorption gas chromatography-mass spectrometry (TD-GC-MS), fluorescence mapping and dynamic mechanical analysis (DMA). Our results show that depending on the weathering conditions, different degradation effects can be observed. By means of SEC an initial strong decrease of the molar masses and a broadening of the mass distributions was found. After a material dependent time span this was followed by a plateau where molar mass changes were less significant. A minor moisture-dependent degradation effect was only found for polyester PU. Fluorescence measurements on two materials revealed an increase in the luminescence intensity upon weathering process reaching a saturation level after about 500 h. The changes in the optical properties observed after different exposure conditions and times were very similar. The TD-GC-MS data showed the fate of the stabilizers and antioxidant in the course of weathering. LC-FTIR measurements revealed a change in peak intensities and the ratio of urethane and carbonyl bands.
Crack healing in glass ceramic solid oxide fuel cell (SOFC) sealants is of utmost importance as cracks caused by thermal cycling remain a bottleneck in developing durable SOFC. Whereas no or low crystal volume fraction seems most favorable for viscous crack healing, it does not for load bearing and undesired diffusion. On the other hand, crystals or filler particles can make the sealant less prone to these disadvantages but it could increase the effective composite viscosity and retard crack healing.
Against this background, the influence of crystal volume fraction, phi, on viscous crack healing in glass matrix composites prepared from soda lime silicate glass and zirconia filler particles was studied. Vickers indention induced radial cracks were healed isothermally during interrupted annealing steps and monitored with optical microscopy. Due to the slow crystallization of the glass under study, phi could be kept constant during crack healing.
For bulk glass samples (phi = =), the decrease in radial crack length was retarded by an initial increase in crack width due to crack rounding. Up to phi = 0.15 the increase in effective viscosity retarded this crack broadening thereby yielding faster crack healing. For phi > 0.15, crack broadening was progressively suppressed but the same was true for crack healing, which was fully prevented above phi = 0.3. Results indicate that optimum micro structures can prevent crack broadening limited by the global effective composite viscosity and this way promote crack healing limited by local glass viscosity.