5 Werkstofftechnik
Filtern
Dokumenttyp
- Zeitschriftenartikel (47)
- Vortrag (45)
- Beitrag zu einem Tagungsband (12)
- Posterpräsentation (4)
- Forschungsdatensatz (3)
- Buchkapitel (2)
- Dissertation (1)
- Forschungsbericht (1)
Sprache
- Englisch (101)
- Deutsch (13)
- Französisch (1)
Schlagworte
- Creep (10)
- CALPHAD (9)
- Nickel-base superalloys (8)
- Crystal plasticity (7)
- Fatigue (7)
- LCF (7)
- Thermomechanical fatigue (7)
- Additive manufacturing (6)
- Crack growth (6)
- Anisotropy (5)
- HIP (5)
- Microstructure (5)
- Crack tip opening displacement (4)
- Data Fusion (4)
- Finite element analysis (4)
- Microstrucrue Design (4)
- Microstructure Design (4)
- Scale-bridging (4)
- Virtual experiments (4)
- Concrete (3)
- Crack (3)
- Crack propagation (3)
- Dislocation (3)
- EBSD (3)
- Environmental stress cracking (ESC) (3)
- Ferritic-martensitic steels (3)
- Fracture mechanics (3)
- Grain boundary engineering (3)
- Low cycle fatigue (3)
- Phase-field (3)
- Phase-field simulation (3)
- Residual stress (3)
- Single-crystals (3)
- Superalloy (3)
- Viscoplasticity (3)
- Additive Fertigung (2)
- Additive Manufacturing (2)
- Ageing (2)
- Alterung (2)
- Characterization (2)
- Continnum damage model (2)
- Cyclic softening (2)
- Damage (2)
- Degradation (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Diffusion (2)
- Dislocations (2)
- Distribution function (2)
- Elasticity (2)
- Environmentally assisted cracking (2)
- Full notch creep test (FNCT) (2)
- Grain boundaries (2)
- Kriechen (2)
- Laser scanning microscopy (LSM) (2)
- Machine Learning (2)
- Mass transport (2)
- Materials Modelling (2)
- Micromechanical model (2)
- Microstructural characterization (2)
- Monte-Carlo Simulation (2)
- Notches (2)
- Ontology (2)
- P92 (2)
- Parametric modeling (2)
- Phase-Field Simulations (2)
- Refractory high entropy alloys (2)
- Safety assessment (2)
- Scanning electron microscopy (2)
- Simulation (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Steels (2)
- Superalloys (2)
- Superlegierung (2)
- Symmetric dwell periods (2)
- Thermodynamics (2)
- Transmission electron microscopy (2)
- Transmission electron microscopy (TEM) (2)
- Under cyclic loading (2)
- Weibull Distribution (2)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AGIL (1)
- AM (1)
- Abgasturbolader Heißteile (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Additive manufactured Ni-base superalloys (1)
- Adiabatic shear bands (1)
- Aging (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alloys' Safety (1)
- Atomistic Simulation (1)
- Aussonderugnsrate (1)
- Austenitic cast iron (1)
- Austenitischer Stahl (1)
- Automated finite element analysis (1)
- Automatische Finite Element Simulation (1)
- Berstdruck (1)
- Betriebsfestigkeit (1)
- Brittle fracture (1)
- Burst (1)
- Burst test (1)
- CALPHAD database analysis (1)
- CMSX4 (1)
- Ceramic multilayers (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Co-segregation (1)
- Co-firings (1)
- Composite pressure vessels (1)
- Contact mechanics (1)
- Craze-crack mechanism (1)
- Creep anisotropy (1)
- Creep-fatigue (1)
- Crystal Defects (1)
- Crystal Plasticity Modelling (1)
- Cycle jump (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Data Management (1)
- Data Structures (1)
- Data structure (1)
- Datenfusion (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation mechanisms (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Directional grain growth (1)
- EXAFS (1)
- Eigenspannung (1)
- Elastic constants (1)
- Elastic energy (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron microscopy (1)
- End of life (1)
- Entwicklung (1)
- Environmental Stress Cracking (1)
- FCH JU (1)
- FNCT (1)
- Failure rate (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Fe-Mn steels (1)
- Ferritic–martensitic steel (1)
- Finite-Elemente-Methode (1)
- Fourier series (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Full-Notch Creep Test (1)
- Full-Notch Creep Test (FNCT) (1)
- Full-notch creep test (1)
- Fullerite (1)
- Global stability criterion (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Heat Treatments (1)
- Hertzian cracks (1)
- High Entropy Alloys (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- Hochtemperaturermüdung (1)
- Horizon 2020 (1)
- Hot isostatic pressing (HIP) (1)
- Hydrogen (1)
- IN738LC (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Interfacial Spinodal (1)
- Interfacial anisotropy (1)
- Internal stresses (1)
- Isostatic hot pressing (HIP) (1)
- Knowledge Representation (1)
- L-PBF 316L (1)
- Laser beam melting (LBM) (1)
- Laser powder bed fusion (1)
- Lattice distortions (1)
- Liquid Metal Embrittlement (1)
- Liquid-metal embrittlement (1)
- Long-term aging (1)
- Low strain (1)
- Machine learning (1)
- Material digital (1)
- Material modeling (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical testing (1)
- Mechanische Eigenschaften (1)
- Mechanistic Modelling (1)
- Mehrskalenmodell (1)
- Microstructural evolution (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Mikrostruktur (1)
- Mindedestberstdruck (1)
- Misfitting precipitate (1)
- Model (1)
- Modeling (1)
- Modell (1)
- Molecular Dynamics (1)
- Monte-Carlo-Analysis (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- Nanoparticles (1)
- Net zero (1)
- Ni-Resist (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Nickel-base superalloy (1)
- Non-destructive testing (1)
- Numerische Simulation (1)
- Ontologie (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Ordering (1)
- Ostwald ripening (1)
- P92 steels (1)
- PE-HD (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase field model (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field modelling (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Plasticity (1)
- Polyethylene (1)
- Polyethylene, PE-HD (1)
- Pore (1)
- Pores (1)
- Porosity (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitation (1)
- Production scatter (1)
- Rafting (1)
- Refractory superalloys (1)
- Relaxation fatigue (1)
- Resistance spot welding (1)
- Restberstfestigkeit (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissverlauf (1)
- S-phase (1)
- S355 steel sheet (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Semantisches Web (1)
- Short-range order (1)
- Single crystal superalloys (1)
- Single-crystal (1)
- Slow crack growth (SCG) (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Strain energy (1)
- Streuung (1)
- Superlattice extrinsic stacking faults (1)
- Surface-induced Melting (1)
- TAHYA (1)
- TEM (1)
- TMF (1)
- Tempered Martensite Ferritic Steels (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile test (1)
- Tensile testing (1)
- Thermo-Mechanical Fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermographie (1)
- Thermomechanische Ermüdung (1)
- Turbine disk (1)
- Vacancies (1)
- Viskoplastisch (1)
- Wissensrepräsentation (1)
- X-Ray Diffraction (1)
- X-ray computed tomography (CT) (1)
- Zugversuch (1)
- ausfgallfreie Lastwechsel (1)
- statistische Auswertung (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.5 Materialmodellierung (115) (entfernen)
Paper des Monats
- ja (3)
Eingeladener Vortrag
- nein (45)
Mean-field modeling and phase-field simulation of grain growth under directional driving forces
(2024)
Directional grain growth is a common phenomenon in the synthetic and natural evolution of various polycrystals. It occurs in the presence of an external driving force, such as a temperature gradient, along which grains show a preferred, yet competitive, growth. Novel additive manufacturing processes, with intense, localized energy deposition, are prominent examples of when directional grain growth can occur, beneath the melting pool. In this work, we derive a phenomenological mean-field model and perform 3D phase-field simulations to investigate the directional grain growth and its underlying physical mechanisms. The effect of the intensity of driving force is simulated and systematically analyzed at the evolving growth front as well as various cross-sections perpendicular to the direction of the driving force. We found that although the directional growth significantly deviates from normal grain growth, it is still governed by a power law relation <R> α tⁿ with an exponent n ~ 0.6–0.7. The exponent n exhibits a nontrivial dependence on the magnitude of the directional driving force, such that the lowest growth exponent is observed for intermediate driving forces. We elaborate that this can originate from the fact that the forces at grain boundary junctions evolve out of balance under the influence of the directional driving force. With increasing the driving forces, the growth exponent asymptotically approaches a value of n ≈ 0.63, imposed by the largest possible grain aspect ratio for given grain boundary energies. The current combined mean-field and phase-field framework pave the way for future exploration in broader contexts such as the evolution of complex additively manufactured microstructures.
Additive manufacturing (AM) offers significantly greater freedom of design compared to conventional manufacturing processes since the final parts are built layer by layer. This enables metal AM, also known as metal 3D printing, to be utilized for improving efficiency and functionality, for the production of parts with very complex geometries, and rapid prototyping. However, despite many technological advancements made in recent years, several challenges hinder the mass adoption of metal AM. One of these challenges is mechanical anisotropy which describes the dependency of material properties on the material orientation. Therefore, in this work, stainless steel 316L parts produced by laser-based powder bed fusion are used to isolate and understand the root cause of anisotropy in AM parts. Furthermore, an efficient and accurate multiscale numerical framework is presented for predicting the deformation behavior of actual AM parts on the macroscale undergoing large plastic deformations. Finally, a novel constitutive model for the plastic spin is formulated to capture the influence of the microstructure evolution on the material behavior on the macroscale.
A widespread recovery of waste heat requires a cost‐effective production of thermoelectric generators. Thermoelectric oxides are predestined for use at high temperatures. For manufacturing reasons, a multilayer generator design will be easily scalable and cost‐effective. To evaluate the potential of ceramic multilayer technology for that purpose, a multilayer of the promising thermoelectric oxides calcium cobaltite (Ca3Co4O9), calcium manganate (CMO, CaMnO3), and glass–ceramic insulation layers is fabricated. Cracks and reaction layers at the interfaces are observed in the microstructure. The compositions of these reaction layers are identified by energy‐dispersive X‐ray spectroscopy and X‐ray diffraction. Mechanical and thermal properties of all layers are compiled from literature or determined by purposeful sample preparation and testing. Based on this data set, the internal stresses in the multilayer after co‐firing are calculated numerically. It is shown that tensile stresses in the range of 50 MPa occur in the CMO layers. The reaction layers have only a minor influence on the level of these residual stresses. Herein, it is proven that the material system is basically suitable for multilayer generator production, but that the co‐firing process and the layer structure must be adapted to improve densification and reduce the tensile stresses in the CMO.
Relation of craze to crack length during slow crack growth phenomena in high‐density polyethylene
(2024)
The craze‐crack mechanism occurring in high‐density polyethylene (HDPE) causing slow crack growth and environmental stress cracking is investigated in detail with respect to the relation of crack length and the related craze zone. This is essential for the understanding of the resulting features of the formed fracture surface and their interpretation in the context of the transition from crack propagation to ductile shear deformation. It turns out that an already formed craze zone does not inevitably result in formation of a propagating crack, but could also undergo ductile failure. For the examination, the full notch creep test (FNCT) was employed with a subsequent advanced fracture surface analysis that was performed using various imaging techniques: light microscopy, laser scanning microscopy, scanning electron microscopy, and X‐ray micro computed tomography scan. FNCT specimens were progressively damaged for increasing durations under standard test conditions applying Arkopal, the standard surfactant solution, and biodiesel as test media were used to analyze the stepwise growth of cracks and crazes. From considerations based on well‐established fracture mechanics approaches, a theoretical correlation between the length of the actual crack and the length of the preceding craze zone was established that could be evidenced and affirmed by FNCT fracture surface analysis. Moreover, the yield strength of a HDPE material exposed to a certain medium as detected by a classic tensile test was found to be the crucial value of true stress to induce the transition from crack propagation due to the craze‐crack mechanism to shear deformation during FNCT measurements.
Highlights
- Progress of crack formation in high‐density polyethylene is analyzed by different imaging techniques
- Determined growth rates depend on distinction between craze zone and crack
- The ratio of the present crack to the anteceding craze zone is validated theoretically
- The transition from crack propagation to ductile shear deformation is identified
- An already formed craze zone may still fail by ductile mechanisms
The current lack of quantitative knowledge on processing-microstructure–property relationships is one of the major bottlenecks in today’s rapidly expanding field of additive manufacturing. This is centrally rooted in the nature of the processing, leading to complex microstructural features. Experimentally-guided modeling can offer reliable solutions for the safe application of additively manufactured materials. In this work, we combine a set of systematic experiments and modeling to address creep anisotropy and its correlation with microstructural characteristics in laser-based powder bed fusion (PBF-LB/M) additively manufactured Inconel-738LC (IN738LC). Three sample orientations (with the tensile axis parallel, perpendicular, and 45° tilted, relative to the building direction) are crept at 850 °C, accompanied by electron backscatter secondary diffraction (EBSD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) investigations. A crystal plasticity (CP) model for Ni-base superalloys, capable of modeling different types of slip systems, is developed and combined with various polycrystalline representative volume elements (RVEs) built on the experimental measurements. Besides our experiments, we verify our modeling framework on electron beam powder bed fusion (PBF-EB/M) additively manufactured Inconel-738LC. The results of our simulations show that while the crystallographic texture alone cannot explain the observed creep anisotropy, the superlattice extrinsic stacking faults (SESF) and related microtwinning slip systems play major roles as active deformation mechanisms. We confirm this using TEM investigations, revealing evidence of SESFs in crept specimens. We also show that the elongated grain morphology can result in higher creep rates, especially in the specimens with a tilted tensile axis.