5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (45)
- Zeitschriftenartikel (44)
- Beitrag zu einem Tagungsband (12)
- Posterpräsentation (4)
- Forschungsdatensatz (3)
- Buchkapitel (2)
- Dissertation (1)
- Forschungsbericht (1)
Sprache
- Englisch (98)
- Deutsch (13)
- Französisch (1)
Schlagworte
- CALPHAD (9)
- Creep (9)
- Nickel-base superalloys (8)
- Fatigue (7)
- LCF (7)
- Thermomechanical fatigue (7)
- Additive manufacturing (6)
- Crack growth (6)
- Crystal plasticity (6)
- Anisotropy (5)
- HIP (5)
- Microstructure (5)
- Crack tip opening displacement (4)
- Data Fusion (4)
- Finite element analysis (4)
- Microstrucrue Design (4)
- Microstructure Design (4)
- Scale-bridging (4)
- Virtual experiments (4)
- Concrete (3)
- Crack (3)
- Crack propagation (3)
- Dislocation (3)
- EBSD (3)
- Ferritic-martensitic steels (3)
- Fracture mechanics (3)
- Grain boundary engineering (3)
- Low cycle fatigue (3)
- Phase-field (3)
- Phase-field simulation (3)
- Residual stress (3)
- Single-crystals (3)
- Superalloy (3)
- Viscoplasticity (3)
- Additive Fertigung (2)
- Additive Manufacturing (2)
- Ageing (2)
- Alterung (2)
- Characterization (2)
- Continnum damage model (2)
- Cyclic softening (2)
- Damage (2)
- Degradation (2)
- Density-based Phase-Field Modelling (2)
- Density-based Thermodynamics (2)
- Density-based model (2)
- Densty-based Thermodynamics (2)
- Diffusion (2)
- Dislocations (2)
- Distribution function (2)
- Elasticity (2)
- Environmental stress cracking (ESC) (2)
- Environmentally assisted cracking (2)
- Grain boundaries (2)
- Kriechen (2)
- Machine Learning (2)
- Mass transport (2)
- Materials Modelling (2)
- Micromechanical model (2)
- Microstructural characterization (2)
- Monte-Carlo Simulation (2)
- Notches (2)
- Ontology (2)
- P92 (2)
- Parametric modeling (2)
- Phase-Field Simulations (2)
- Refractory high entropy alloys (2)
- Safety assessment (2)
- Scanning electron microscopy (2)
- Simulation (2)
- Simulation of concrete (2)
- Single-Crystal (2)
- Steels (2)
- Superalloys (2)
- Superlegierung (2)
- Symmetric dwell periods (2)
- Thermodynamics (2)
- Transmission electron microscopy (2)
- Transmission electron microscopy (TEM) (2)
- Under cyclic loading (2)
- Weibull Distribution (2)
- 9-12% Cr ferritic-martensitic steels (1)
- 9-12%Cr steel (1)
- 9–12%Cr steel (1)
- AGIL (1)
- AM (1)
- Abgasturbolader Heißteile (1)
- Accelerated integration scheme (1)
- Accelerated temporal integration (1)
- Adiabatic shear bands (1)
- Aging (1)
- Al alloys (1)
- Al-Cu alloy (1)
- Alloy Safety (1)
- Alloy design (1)
- Alloy microstructure (1)
- Alloys' Safety (1)
- Atomistic Simulation (1)
- Aussonderugnsrate (1)
- Austenitic cast iron (1)
- Austenitischer Stahl (1)
- Automated finite element analysis (1)
- Automatische Finite Element Simulation (1)
- Berstdruck (1)
- Betriebsfestigkeit (1)
- Brittle fracture (1)
- Burst (1)
- Burst test (1)
- CALPHAD database analysis (1)
- CMSX4 (1)
- Chemically complex alloy (1)
- Chemo-mechanical coupling (1)
- Co-segregation (1)
- Composite pressure vessels (1)
- Contact mechanics (1)
- Creep anisotropy (1)
- Creep-fatigue (1)
- Crystal Defects (1)
- Crystal Plasticity Modelling (1)
- Cycle jump (1)
- Cyclic loading (1)
- Cyclic oxidation (1)
- Data Management (1)
- Data Structures (1)
- Data structure (1)
- Datenfusion (1)
- Defects engineering (1)
- Defects phase diagram (1)
- Defects thermodynamics (1)
- Deformation mechanisms (1)
- Density-based Model (1)
- Density-based phase-field modelling (1)
- Differential scanning calorimetry (DSC) (1)
- Digital image correlation (1)
- Digitalisierung (1)
- Digitalization (1)
- Digitization (1)
- Directional grain growth (1)
- EXAFS (1)
- Eigenspannung (1)
- Elastic constants (1)
- Elastic energy (1)
- Electron backscattered diffraction (EBSD) (1)
- Electron microscopy (1)
- End of life (1)
- Entwicklung (1)
- Environmental Stress Cracking (1)
- FCH JU (1)
- FNCT (1)
- Failure rate (1)
- Fatigue crack growth (1)
- Fatigue damage (1)
- Fe-Mn steels (1)
- Ferritic–martensitic steel (1)
- Finite-Elemente-Methode (1)
- Fourier series (1)
- Fracture surface analysis (1)
- Fracture surfaces (1)
- Full notch creep test (FNCT) (1)
- Full-Notch Creep Test (1)
- Full-Notch Creep Test (FNCT) (1)
- Full-notch creep test (1)
- Fullerite (1)
- Global stability criterion (1)
- Grade S960QL steel (1)
- Gradient-enhanced damage (1)
- Gradient-enhanced fatigue model (1)
- Grain Boundary (1)
- Grain Boundary Phase Diagram (1)
- Grain Boundary Segregation (1)
- Grain Boundary Spinodal (1)
- Grain boundary (1)
- Grain boundary phase diagram (1)
- Grain boundary structure (1)
- Grain boundary thermodynamics (1)
- Grain growth (1)
- Heat Treatments (1)
- Hertzian cracks (1)
- High Entropy Alloys (1)
- High-Entropy Alloys (1)
- High-Entropy Materials (1)
- High-entropy alloys (1)
- Hochtemperaturermüdung (1)
- Horizon 2020 (1)
- Hot isostatic pressing (HIP) (1)
- Hydrogen (1)
- IN738LC (1)
- Inconel 718 (1)
- Incremental lifetime models (1)
- Interfacial Spinodal (1)
- Interfacial anisotropy (1)
- Isostatic hot pressing (HIP) (1)
- Knowledge Representation (1)
- L-PBF 316L (1)
- Laser beam melting (LBM) (1)
- Laser powder bed fusion (1)
- Laser scanning microscopy (LSM) (1)
- Lattice distortions (1)
- Liquid Metal Embrittlement (1)
- Liquid-metal embrittlement (1)
- Long-term aging (1)
- Low strain (1)
- Machine learning (1)
- Material digital (1)
- Material modeling (1)
- Mean-field modelling (1)
- Mechanical anisotropy (1)
- Mechanical behavior (1)
- Mechanical testing (1)
- Mechanische Eigenschaften (1)
- Mechanistic Modelling (1)
- Mehrskalenmodell (1)
- Microstructural evolution (1)
- Microstructure Evolution (1)
- Microstructure characterisation (1)
- Microstructure design (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Mikrostruktur (1)
- Mindedestberstdruck (1)
- Misfitting precipitate (1)
- Model (1)
- Modeling (1)
- Modell (1)
- Molecular Dynamics (1)
- Monte-Carlo-Analysis (1)
- Nanocrystalline alloys (1)
- Nanoindentation (1)
- Nanoparticles (1)
- Net zero (1)
- Ni-Resist (1)
- Nickel alloys (1)
- Nickel-base alloy (1)
- Nickel-base superalloy (1)
- Non-destructive testing (1)
- Numerische Simulation (1)
- Ontologie (1)
- Optical criterion (1)
- Optical criterion of brittleness (1)
- Ordering (1)
- Ostwald ripening (1)
- P92 steels (1)
- PE-HD (1)
- Phase Diagram (1)
- Phase Diagrams (1)
- Phase field model (1)
- Phase stability (1)
- Phase-Field Simulation (1)
- Phase-field Simulation (1)
- Phase-field modelling (1)
- Physically based material model (1)
- Physics-informed Neural Network (1)
- Plasticity (1)
- Polyethylene (1)
- Polyethylene, PE-HD (1)
- Pore (1)
- Pores (1)
- Porosity (1)
- Power plant (1)
- Precipitate shape (1)
- Precipitation (1)
- Production scatter (1)
- Rafting (1)
- Refractory superalloys (1)
- Relaxation fatigue (1)
- Resistance spot welding (1)
- Restberstfestigkeit (1)
- Rissausbreitung (1)
- Risse (1)
- Rissform (1)
- Rissverlauf (1)
- S-phase (1)
- S355 steel sheet (1)
- Segregation Engineering (1)
- Segregation engineering (1)
- Selective laser melting (SLM) (1)
- Semantic Web Technologies (1)
- Semantisches Web (1)
- Short-range order (1)
- Single crystal superalloys (1)
- Single-crystal (1)
- Spinodal Decomposition (1)
- Spinodal decomposition (1)
- Split Hopkinson bar (1)
- Strain energy (1)
- Streuung (1)
- Surface-induced Melting (1)
- TAHYA (1)
- TEM (1)
- TMF (1)
- Tempered Martensite Ferritic Steels (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile test (1)
- Tensile testing (1)
- Thermo-Mechanical Fatigue (1)
- Thermo-mechanical fatigue (1)
- Thermographie (1)
- Thermomechanische Ermüdung (1)
- Turbine disk (1)
- Vacancies (1)
- Viskoplastisch (1)
- Wissensrepräsentation (1)
- X-Ray Diffraction (1)
- Zugversuch (1)
- ausfgallfreie Lastwechsel (1)
- statistische Auswertung (1)
- γ″ phase (1)
- θ′ phase (1)
- θ′-(Al2Cu) precipitate phase (1)
Organisationseinheit der BAM
- 5.5 Materialmodellierung (112) (entfernen)
Paper des Monats
- ja (3)
Eingeladener Vortrag
- nein (45)
An improved diffusion model is proposed for pore annihilation during HIP of single-crystal nickel-base superalloys. The model assumes the pore dissolution by emission of vacancies and their sink to the low angle boundaries. Calculation, considering distribution of the pore sizes, predicts the kinetics of pore annihilation similar to the experimental one.
Les aubes de turbines à gaz utilisées en particulier pour les turboréacteurs de l’aéronautique sont élaborées par fonderie en superalliage monocristallin à base de nickel. Le procédé de fonderie, ainsi que les traitements thermique d’homogénéisation réalisés à très haute température, induisent la présence de pores au sein des pièces qui affectent les propriétés mécaniques et la durée de vie des aubes. Afin de réduire cette porosité les motoristes effectuent un traitement de compression isostatique à chaud (CIC) au cours duquel la porosité diminue par fermeture des pores. Afin de mieux comprendre les mécanismes impliqués au cours du traitement de CIC, nous avons lancé un programme de recherche dans le cadre du projet ERA-Net MICROPORE. La modélisation par champ de phase des mécanismes en jeu est présentée au cours de ce colloque. Nous présentons dans cette affiche un des volets de la caractérisation expérimentale du projet.
Des échantillons de superalliage CMSX4 sont observés après traitement de mise en solution et CIC sous 103 MPa à 1288°C pour différentes durées. Les pores présents sont caractérisés par microscopie électronique à balayage (MEB) afin de suivre l’évolution du taux de porosité au cours du traitement. Une caractérisation plus détaillée de pores partiellement refermés est menée par MEB et grâce à la diffraction des électrons rétrodiffusés (EBSD). Une vision tridimensionnelle de ces défauts est obtenue par des coupes métallographiques effectuées par découpe ionique (FIB).
Le projet ERA – Net MICROPORE est financé en Allemagne par la DFG (projects EP 136/1-1 and FE933/2-1) et en France par l’ANR (projects ANR15-MERA-000-03 and ANR15-MERA-0003-04).
The creep behavior of single crystals of the nickel-based superalloy CMSX-4 was investigated at 1288 °C, which is the temperature of the hot isostatic pressing treatment applied to this superalloy in the industry. It was found that at this super-solvus temperature, where no gammaPrime-strengthening occurs, the superalloy is very soft and rapidly deforms under stresses between 4 and 16 MPa. The creep resistance was found to be very anisotropic, e.g., the creep rate of [001] crystals was about 11 times higher than that of a [111] crystal. The specimens of different orientations also showed a very different necking behavior. The reduction of the cross-sectional area psi of [001] crystals reached nearly 100 pct, while for a [111] crystal psi = 62 pct. The EBSD analysis of deformed specimens showed that despite such a large local strain the [001] crystals did not recrystallize, while a less deformed [111] crystal totally recrystallized within the necking zone. The recrystallization degree was found to be correlated with deformation behavior as well as with dwell time at high temperature. From the analysis of the obtained results (creep anisotropy, stress dependence of the creep rate, traces of shear deformation, and TEM observations), it was concluded that the main strain contribution resulted from <01-1>{111} octahedral slip.
Virtual-lab-based determination of a macroscopic yield function for additively manufactured parts
(2018)
This work presents a method for the yield function determination of additively manufactured parts of S316L steel. A crystal plasticity model is calibrated with test results and used afterwards to perform so-called virtual experiments, that account for the specific process-related microstructure including crystallographic and morphological textures. These simulations are undertaken on a representative volume element (RVE), that is generated from EBSD/CT-Scans on in-house additively manufactured specimen, considering grain structure and crystal orientations. The results of the virtual experiments are used to determine an anisotropic Barlat yield function, that can be used in a macroscopical continuum-sense afterwards. This scale-bridging approach enables the calculation of large-scale parts, that would be numerically too expensive to be simulated by a crystal plasticity model.
The employment of renewable energy resources, which are naturally intermittent, for electricity generation has altered the working conditions of conventional power plants from continuous (baseload) to cyclic or flexible operation. For a long time, 9-12% Cr ferritic-martensitic stainless steels have been widely used in power plants due to their favorable characteristics such as high creep strength at high temperatures and oxidation and corrosion resistance. The components of power plants are subjected to long term cyclic loadings including fatigue and creep-fatigue at high temperatures. As ferritic-martensitic steels are known to exhibit cyclic softening when subjected to such loading scenarios, it is crucial to study the material response in such conditions. Since it is impossible to test the material behavior exactly as the operation conditions of power plants, due to technical difficulties and cost issues, it is necessary to develop physically-based material models that can predict the material behavior in more realistic situations.
In recent years, many material models have been proposed to describe the behavior of 9-12% Cr ferritic-martensitic stainless steels, which follow phenomenological or physically-based approaches. Phenomenological models provide a stress-strain relation based on empirical observations although they usually lack physical background. To alleviate this drawback and to allow for more flexibility and wider ranges of strain-rate and temperature, physically-based models are suggested. In this approach, microstructural evolution, dislocation movement and/or kinetics of plastic deformation processes are included. The physically-based models allow for a better extrapolation from the experiment results to other operation conditions and their material constants can be interpreted physically. Compared to the former approach, the material behavior can be described more accurately and flexibly and the number of material constants is less in general. In the presented work, the existing micromechanical models developed for P92 steel are compared and extended to allow for new dislocation-based strengthening/cyclic mechanisms. Their performance is assessed in the light of mechanical test data from creep-fatigue and thermo-mechanical fatigue experiments and detailed characterizations of the microstructure evolution in the fatigued material.
A constitutive model for the mechanical behaviour of single crystal Ni-base superalloys under high temperature conditions has been developed in the framework of a Cooretec project in cooperation with Siemens AG, MTU Aero Engines AG and University Bayreuth. In addition to the conventional material properties e.g. elastic constants, the model requires the parameters of the initial microstructure as an input. Thus, the γ’-precipitate size and the channel width of the γ-matrix were obtained from SEM micrographs. The model uses the slip system theory and describes the movement, multiplication and annihilation of dislocations in the channels. Furthermore, the cutting of precipitates is another mechanism contributing to the plastic flow. The evolution of the morphology due to rafting and its effects on the deformation have been implemented according to. The kinematic hardening is introduced as a stress tensor to realistically represent the strain hardening of arbitrary oriented single crystals.
The mechanical behaviour of single crystal specimens has been experimentally investigated in tension tests at different strain rates and in creep tests under various loads. The constitutive model has been calibrated based on the experimental data for temperatures of 950°C and 850°C and the [001] and [111] crystallographic orientations.
Finally, a micromechanical model was created to simulate the creep response of additive manufactured polycrystalline structures. An EBSD image is taken to obtain the grain geometry and their respective orientation. The grain boundaries are discretised using cohesive elements, whereas the single crystal model was applied to each grain in the representative volume. The polycrystal model is generated using Dream3D, NetGen and other software previously developed at the BAM.
The creep behavior of single-crystals of the nickel-base superalloy CMSX-4 was investigated at 1288°C, which is the temperature of the hot isostatic pressing (HIP) treatment applied to this superalloy in the industry. It was found that at this super-solvus temperature, where no Gamma’-strengthening occurs, the superalloy is very soft and rapidly deforms under stresses between 4 and 16 MPa. The creep resistance was found to be very anisotropic, e.g. the creep rate of [001] crystals was about 11 times higher than that of a [111] crystal. The specimens of different orientations also showed a very different necking behavior. The reduction of the cross-section area psi of [001] crystals reached nearly 100%, while for a [111] crystal psi=62%. The EBSD analysis of deformed specimens showed that despite such a large local strain the [001] crystals didn’t not recrystallize, while a less deformed [111] crystal totally recrystallized within the necking zone. From the shape of deformed specimens and TEM investigations it was concluded that the main strain contribution resulted from <011> {111} octahedral slip.
The sound numerical prediction of welding-induced thermal stresses, residual stresses, and distortions strongly depends on the accurate description of a welded material’s thermomechanical deformation behaviour. In this work, we provide experimental data on the viscoplastic deformation behaviour of a grade-s960ql steel up to a temperature of 1000 ◦C. In addition, a multi-phase viscoplastic material model is proposed, which accounts for the experimentally observed isothermal deformation behaviour of grade-s960ql steel base and austenitised material, as well as for athermal contributions that originate from solid-state phase transformations. The multi-phase viscoplastic and a classic rateindependent isotropic hardening material model were applied in the numerical simulations of both-ends-fixed bar Satoh tests and a single-pass gas metal arc weld. The influence of material modelling choices on the agreement between numerical simulation and experimental results is discussed, and recommendations for further work are given.
With the introduction of a mass transport mechanism the entire problem is subjected to a time frame that dictates the time-dependent action of soluted species on mechanical properties. A numerical framework within the phase-field approach is presented with an embrittlement-based coupling mechanism. The underlying functionals are expressed in terms of the displacement, mass concentration and crack phase-field. Within the phase-field approach the modelling of sharp crack discontinuities is replaced by a diffusive crack model facilitating crack initiation and complex crack topologies without the requirement of a predefined crack path. The isotropic hardening of the elasto-plastic deformation model and the local fracture criterion are affected by the species concentration. This allows for embrittlement and leads to an accelerated crack propagation. An extended mass transport equation for hydrogen embrittlement, accounting for mechanical stresses and deformations, is implemented. For stabilisation purposes a staggered scheme is applied to solve the system of partial differential equations by a multi-field finite-element method. A thermodynamically consistent coupling relation that accommodates the required mechanisms is presented.