Anmelden

Open Access

  • Startseite
  • Suchen
  • Browsen
  • Veröffentlichen
  • Hilfe
  • Organisationseinheit der BAM

5 Werkstofftechnik

  • 5.0 Abteilungsleitung und andere (117) RSS-Feed abonnieren
  • 5.1 Materialographie, Fraktographie und Alterung technischer Werkstoffe (336) RSS-Feed abonnieren
  • 5.2 Experimentelle und modellbasierte Werkstoffmechanik (270) RSS-Feed abonnieren
  • 5.3 Mechanik der Polymerwerkstoffe (279) RSS-Feed abonnieren
  • 5.4 Keramische Prozesstechnik und Biowerkstoffe (135) RSS-Feed abonnieren
  • 5.5 Technische Keramik (137) RSS-Feed abonnieren
  • 5.6 Glas (192) RSS-Feed abonnieren

Filtern

Autor

  • Amez-Droz, M. (1)
  • Finn, Monika (1)
  • Konstantopoulou, K. (1)
  • Meuter, F. (1)
  • Meyer, Christian (1)
  • Savary, F. (1)
  • Scheuerlein, C. (1)
  • Tock, J.-P. (1)
  • Uhlemann, Patrick (1)

Erscheinungsjahr

  • 2019 (1) (entfernen)

Dokumenttyp

  • Zeitschriftenartikel (1) (entfernen)

Schlagworte

  • Resonance testing (1) (entfernen)

Organisationseinheit der BAM

  • 5 Werkstofftechnik (1)
  • 5.2 Experimentelle und modellbasierte Werkstoffmechanik (1)
  • 5.6 Glas (1)

1 Treffer

  • 1 bis 1
  • CSV
  • RIS
  • 10
  • 20
  • 50
  • 100
Thermomechanical properties of polymers for use in superconducting magnets (2019)
Finn, Monika ; Uhlemann, Patrick ; Meyer, Christian ; Scheuerlein, C. ; Amez-Droz, M. ; Meuter, F. ; Konstantopoulou, K. ; Savary, F. ; Tock, J.-P.
The coefficient of thermal expansion (CTE) and the thermomechanical properties of the polymers used in superconducting magnets need to be known in order to predict their stress state under the different magnet assembly and operating conditions. We have measured Young’s moduli of typically used polymers during in situ heat cycles with the dynamic resonancemethod. The dynamic test results are compared with Young’s moduli determined from quasi-static stress–strain measurements at room temperature, 77 K and 4.2 K. A moderate elastic anisotropy is found for the fiber reinforced polymers. CTEs are compared based on dilation experiments. TheCTEs of the fiber reinforced polymers studied are similar to those of copper or steel. In contrast, the pure resins exhibit relatively larger CTEs.
  • 1 bis 1

OPUS4 Logo

  • Kontakt
  • Impressum
  • Sitelinks