5 Werkstofftechnik
Filtern
Dokumenttyp
- Vortrag (111) (entfernen)
Referierte Publikation
- nein (111)
Schlagworte
- Corrosion (17)
- Microstructure (12)
- Additive Manufacturing (9)
- Fraktographie (9)
- 316L (6)
- CCUS (6)
- High entropy alloys (6)
- Scanning electron microscopy (6)
- Transmission electron microscopy (6)
- Diffraction (5)
- EBSD (5)
- Fractography (5)
- Machine Learning (5)
- Additive manufacturing (4)
- CCS (4)
- CO2 (4)
- Droplet corrosion (4)
- High-temperature corrosion (4)
- Laser powder bed fusion (4)
- Martensitic steel (4)
- Residual Stress (4)
- Sulfidation (4)
- Supercritical/dense phase CO2 (4)
- Additive Fertigung (3)
- CCU (3)
- Carbon steels (3)
- Creep (3)
- Creep behavior (3)
- Fatigue (3)
- Geothermal (3)
- High temperature corrosion (3)
- In situ (3)
- Mechanical properties (3)
- Oxidation (3)
- SEM (3)
- Superaustenite steel (3)
- Transmission electron microscopy (TEM) (3)
- Welding (3)
- X-ray diffraction (3)
- AGIL (2)
- AISI 316L (2)
- CO2 quality (2)
- Carbon capture (2)
- Carbon capture storage (2)
- Carbon dioxide (2)
- Carbon steel (2)
- Chemically complex alloy (2)
- Datenbank (2)
- Digitalisierung (2)
- Dislocation (2)
- Electron microscopy (2)
- Electron-beam-induced modification (2)
- Ferritic-martensitic steels (2)
- Fracture surface (2)
- Gitterkonstanten (2)
- High Entropy Alloy (2)
- High entropy alloy (2)
- High-entropy alloy (2)
- High-entropy alloys (2)
- Hochentropie-Legierung (2)
- Impurities (2)
- L-PBF (2)
- Mechanical behavior (2)
- Microstructural analysis (2)
- Mikrostruktur (2)
- Mixed gas atmosphere (2)
- Neutron diffraction (2)
- Oxidation behavior (2)
- Phasenidentifikation (2)
- Pipeline (2)
- REM (2)
- Schadensanalyse (2)
- Silver diffusion (2)
- Thermo-Mechanical Fatigue (2)
- Topographie (2)
- Topography (2)
- XANES (2)
- 3D (1)
- 3D REM (1)
- 3D Reconstruction (1)
- AFM based test methods (1)
- Additiv gefertigter Stahl (1)
- Ageing (1)
- Aggressive gases (1)
- Alkali zinc borate glass (1)
- Alkali zinc borate glasses (1)
- Aluminium Alloy (1)
- Annealing (1)
- Austenitic steel 316L (1)
- Automation (1)
- Bruchflächen (1)
- CO2-corrosion (1)
- Calcium sulfates (1)
- Cantor alloy (1)
- Capture (1)
- Carbon (1)
- Carbon steels (1)
- Carbon Capture (1)
- Carbon Capture, Utilization and Storage (CCUS) (1)
- Characterization (1)
- Chemically complex alloys (1)
- Chromia (1)
- Chromium oxide (1)
- Coatings (1)
- Complex loading (1)
- Component assessment (1)
- Compositionally complex alloys (1)
- Computed Tomography (1)
- Condensation (1)
- Contamination (1)
- Cow stress (1)
- Cr2O3 (1)
- Crack propagation (1)
- Creep-Fatigue (1)
- Creep-fatigue (1)
- Crevice corrosion (1)
- Crystal Orientation (1)
- Crystal Plasticity Modelling (1)
- Cyclic R-Curve (1)
- Cyclic oxidation (1)
- Damage Tolerance (1)
- Deep learning (1)
- Defects (1)
- Degradation (1)
- Diffraction Elastic Constants (1)
- Diffraction contrast (1)
- Digital image correlation (1)
- Dislocation substructure (1)
- Disordered assemblies (1)
- Dissimilar metal weld (1)
- Driving physical mechanism (1)
- EDX (1)
- EDXRD (1)
- Early oxidation (1)
- Eigenspannung (1)
- Electron backscatter diffraction (1)
- Electron backscattered diffraction (EBSD) (1)
- Entwicklung (1)
- Ermüdungsriss (1)
- FIB (1)
- Fabrication method (1)
- Fahrrad (1)
- Fatigue Crack Growth (1)
- Fatigue fracture (1)
- FeCr- alloys (1)
- Fluorescence spectroscopy (1)
- Focused Ion Beam (1)
- GD-OES (1)
- Gas storage (1)
- Gitterfehlpassung (1)
- Gold nanoparticle synthesis (1)
- Gold nanoparticles (1)
- HEA (1)
- Heat Treatments (1)
- High Entropy Alloys (1)
- High Temperature Corrosion (1)
- High entropy superalloys (1)
- High-Temperature Corrosion (1)
- Hot isostatic pressing (1)
- Hydrogen (1)
- Hyper-arid (1)
- Implant failures (1)
- In-Situ Testing (1)
- In-situ (1)
- Inconel 686 coating (1)
- Inconel 718 (1)
- Injection (1)
- Kontrastierung (1)
- Korrosion (1)
- Kriechen (1)
- Kriechversuche (1)
- Kunststoffe (1)
- Kurzzeitfestigkeit (1)
- L-PBF 316L (1)
- LCF (1)
- Laser Powder Bed Fusion (1)
- Laser Powder Bed fusion (1)
- Laser cladding (1)
- Lattice misfit (1)
- Layer system (1)
- Lebensdauer (1)
- Legierung mit komplexer Zusammensetzung (1)
- Lithium Ion Batteries (1)
- Localized plasmons (1)
- Low Cycle Fatigue (1)
- Low cycle fatigue (1)
- MEA (1)
- Manganese oxide (1)
- Martensitic steel (1)
- Material defects (1)
- Mechanische Eigenschaften (1)
- Medium Entropy Alloys (1)
- Medium entopy alloy (1)
- Medium-entropy alloy (1)
- Melt pool boundary (1)
- Metallic components (1)
- Metallic silver precipitates (1)
- Metallography (1)
- Micro-shrinkages (1)
- Microbiologically influenced corrosion (1)
- Microstructural characterization (1)
- Microstructure Characterization (1)
- Microstructure characterisation (1)
- Microstructure evolution (1)
- Microstructure modification (1)
- Mikro-Computertomographie (1)
- Mikrostrukturentwicklung (1)
- Mn3O4 (1)
- Modeling (1)
- Mortar (1)
- Mortel (1)
- Multi-principal element alloys (1)
- Multiaxial stress state (1)
- Nano-assemblies (1)
- Nanoparticle synthesis (1)
- Negative charged microparticle (1)
- Neutron Diffraction (1)
- Non-destructive testing (1)
- Nucleation (1)
- Ontologie (1)
- Ontologien (1)
- Ooxidation (1)
- P92 (1)
- PBF-LB/M/316L (1)
- Phase analysis (1)
- Phase separation (1)
- Physically based material model (1)
- Pipeline network (1)
- Planetary surface (1)
- Plattform Material Digital (1)
- Polyaniline (1)
- Power plant (1)
- Protective coating (1)
- Präparation (1)
- Recommendations (1)
- Refractory chemically complex alloy (1)
- Refractory chemically complex alloys (1)
- Regelwerke (1)
- Residual stress (1)
- Residual stress analysis (1)
- Review (1)
- Roboter (1)
- Salzschmelzen (1)
- Sample preparation (1)
- Scanning electron microscope (1)
- Scanning transmission electron microscopy (STEM) (1)
- Schadensprävention (1)
- Schwingbrüche (1)
- Schwingstreifen (1)
- Selective laser melting (1)
- Semantisches Web (1)
- Semiconductor materials (1)
- SiO2 (1)
- Sibayak (1)
- Silver cluster (1)
- Sol-gel coating (1)
- Solid solution strengthening (1)
- Steel (1)
- Storage (1)
- Strain rate dependence (1)
- Sulfiding (1)
- Superalloy (1)
- Superalloy single crystals (1)
- Superalloys (1)
- Superaustenite steel (1)
- Supercritical/dense phase CO 2 (1)
- Superlegierung (1)
- Symbolik (1)
- Synchrotron radiation (1)
- Synthetic air (1)
- Systematische Schadensanalysen, Prozeduren (1)
- TEM (1)
- TMF (1)
- Temperature driven process (1)
- Tempered Martensite Ferritic Steels (1)
- Tempered martensite ferritic steel (1)
- Tempered martensite ferritic steels (1)
- Tensile testing (1)
- Texture (1)
- Thermo-mechanical fatigue (1)
- Thermogravimetric analysis (1)
- Transmissionselektronenmikroskopie (1)
- Utilization (1)
- Utilization, and storage (CCUS) technology (1)
- Vernetzung (1)
- Versetzungsstrukturen (1)
- Virtueller Materialdatenraum (1)
- Welding processing influences (1)
- Whole-chain CCS scenario (1)
- Wissensrepräsentation (1)
- Wärmespeicher (1)
- X-Ray Diffraction (1)
- Zugversuch (1)
- Zyklische R-Kurve (1)
- arbon capture (1)
- carbon steel (1)
- condensate (1)
- corrosion (1)
- electrochemical characterization (1)
- impurities (1)
- microstructure analysis (1)
- pitting corrosion (1)
- selective laser melting (1)
- utilization, and storage (CCUS) technology (1)
- Öffentliche Sicherheit (1)
Organisationseinheit der BAM
- 5.1 Mikrostruktur Design und Degradation (111) (entfernen)
In this presentation, the results of the determination of the diffraction and single-crystal elastic constants of laser powder bed fused Inconel 718 are presented. The analysis is based on high-energy synchrotron diffraction experiments performed at the Deutsches Elektronen-Synchrotron. It is shown that the characteristic microstructure of laser powder bed fused Inconel 718 impacts the elastic anisotropy and therefore the diffraction and single-crystal elastic constants. Finally, the consequences on the diffraction-based residual stress determination of laser powder bed fused Inconel 718 are discussed.
Unlike conventional alloys, which typically consist of one main element, high-entropy alloys (HEAs) contain five or more principal elements, which broaden chemical complexity and with it a realm of synergistic mechanisms. The AlMo0.5NbTa0.5TiZr HEA initiated a subclass of Al-containing refractory (r)HEAs that has recently drawn attention [2]. The alloy has a superalloy-resembling B2/bcc nanostructure, which inspired its name refractory high entropy superalloy (RSA). With high-temperature (HT) compressive strengths beyond conventional Ni-based superalloys, this nanostructure could be used for improved HT structural applications. However, in the application-relevant HT regime the Al-Zr-rich B2 phase decomposes to form a hexagonal Al-Zr-based intermetallic (Al4-xZr5; x: 0..1) [3,4]. This work explores the fascinating yet fatal micromechanisms associated to this phase transformation, in the context of creep, annealing and oxidation experiments performed between 800 and 1200 °C.
The material was produced by arc-melting and heat treatment in argon, which lead to grain boundaries decorated with up to 7%. Interrupted constant-load creep tests were performed under vacuum (at 10-4 Pa), at 900–1100 °C with external tensile stresses of 30–120 MPa. Oxidation experiments were separately conducted for 24 hours at 800 and 1000 °C in both dry (21% O2 + 79% N2) and humid (8% O2 + 74% N2 + 18% H2O) air. After the experiments, the samples were characterized by X-ray diffraction, scanning electron microscopy and transmission electron microscopy to reveal degradation mechanisms. Crystallographic texture, orientation relationships and stabilization of an oxygen-containing iso structure (Al4-xZr5(Ox-y); y: 0..x) of the Al-Zr-rich intermetallic are found and discussed.
Several studies have been shown that the electron beam can be used to create nanomaterials from microparticle targets in situ in a transmission electron microscope (TEM). Here, we show how this method has to be modified in order to synthesize plasmonic gold nanoparticles (NPs) on insulating silicon oxide substrate by employing a scanning electron microscope with a comparatively low acceleration voltage of 30 kV. The synthesized NPs exhibit a random distribution around the initial microparticle target: Their average size reduces from 150 nm to 3 nm with growing distance to the initial Au microparticle target. Similarly, their average distance increases. The synthesized NP assemblies therefore show distinctly different plasmonic behaviour with growing distance to the target, which allows to study consequences of random hybridization of surface plasmon in disordered system, such as Anderson localization. To reveal the surface plasmons and their localization behaviour we apply electron energy loss spectroscopy in the TEM.
Gypsum (CaSO4∙2H2O), bassanite (CaSO4∙0.5H2O), and anhydrite (CaSO4) are essential evaporite minerals for the evolution of hyper-arid surface environments on Earth and Mars (Voigt et al. 2019; Vaniman et al. 2018). The formation mechanism of especially anhydrite has been a matter of scientific debate for more than a century (van’t Hoff et al. 1903). To date, there exists no model that can reliably predict anhydrite formation at earth’s surface conditions. While thermodynamics favor its formation, it is hardly achieved on laboratory time scales at conditions fitting either the Atacama Desert on Earth, or the surface of Mars (Wehmann et al. 2023). In light of most recent developments (e.g. Stawski et al. 2016), that advocate for a complex, non-classical nucleation mechanism for all calcium sulphates, we present an analysis of natural samples from the Atacama Desert to identify key features that promote the nucleation and growth of anhydrite under planetary surface conditions. Our analyses reveal at least three distinct anhydrite facies, with differing mineralogy and micro- to nano-structures. The facies are (1) aeolian deposits with sub-μm grain sizes, (2) (sub-)surface nodules that formed from aeolian deposits and (3) selenites with secondary anhydrite rims. Possible mechanisms of their formation will be discussed.
Several studies have shown that the electron beam (e-beam) can be used to create nanomaterials from microparticles in situ in a TEM. However, attempts to produce gold nanoparticles (NPs) on silicon oxide substrate remained to be accomplished. Here, we show that the production of gold NPs is possible by using the e-beam in a SEM, under a set of parameters. To understand the physical mechanisms leading to the gold NPs, the mechanisms of e-beam induced charging as well as e-beam induced heating of the MPs were discussed. Several hints point to heating as the driving mechanism.
Several studies have shown that the electron beam (e-beam) can be used to create nanomaterials from microparticles in situ in a TEM. However, attempts to produce gold nanoparticles (NPs) on silicon oxide substrate remained to be accomplished. Here, we show that the production of gold NPs is possible by using the e-beam in a SEM, under a set of parameters. The NPs produced present a size gradient along the radial direction. A parameter study shows that the microparticles may: 1) flicker away without producing NPs, 2) fragment to form NPs and/or 3) react with the silicon oxide substrate, depending on the applied current. A hypothesis regarding the driving physical phenomena that lead the microparticles to fragment into NPs is discussed. Fabrication of gold NPs in the SEM provides a more cost-effective option as compared to the established method in the TEM.
While a lage amount of research on high entropy alloys is oriented towards mechanical properties and the microstructural improvement it is also necessary to keep an eye on the environment that potential application materials will be submitted to. The Co-Cr-Fe-Ni based high entropy family has shown great potential over the years of high entropy research and some candidate alloys are chosen for an insight into their corrosion behaviour. Several atmospheres are studied, i.e. O2, H2O, SO2 and a mix thereof in argon as well as synthetic air. Just as for classic alloys, the chromium is the most important element in terms of protection agains further corrosion. The addition of manganese, as in case of the “Cantor alloy” CrMnFeCoNi, overpasses Cr when it comes to oxygen affinity and thus counteracts the layer formation of Cr2O3. Even without Mn, a temperature chosen too high will also affect the formation of the chromium oxide layer and spall it off, annulling its protective potential. We can also observe how trace elements influence the layer formation. These effects and their mechanisms will be discussed for the alloys CrFeNi, CoCrNi, CrMnFeCoNi and variations of Al10Co25Cr8Fe15Ni36Ti6 using a combination of electron microscopy, thermodynamic calculations and x-ray diffraction.
The multi-phase approach has proven to widen the application properties of high entropy alloys. After a decade of testing different alloys in the Al-Co-Cr-Cu-Fe-Ni-Ti family the Al10Co25Cr8Fe15Ni36Ti6 was found to be a solid base for more fine-tuned microstructural optimization. Following the example of superalloys, the Al10Co25Cr8Fe15Ni36Ti6 alloy aims for a γ/γ' microstructures in order to guarantee a good microstructural stability at high temperatures. The shape and volume fraction of the γ' particles is known to influence the mechanical properties of superalloys, and they do so in the high entropy family as well [1]. Shape, misfit and creep properties of several modified versions of the Al10Co25Cr8Fe15Ni36Ti6 alloy are compared and discussed in this talk.
Die Fraktographische Online-Datenbank der AG Fraktographie – Entwicklungsstand und weitere Planung
(2023)
Vortrag zum aktuellen Stand der fraktographischen online-Datenbank. Darstellung des AGM/DVM Gemeinschaftsausschusses REM in der Materialforschung und seiner Arbeitsgruppen Fraktographie, EBSD und 2D/3D-Prüfung. Ziele und Inhalte der fraktographischen Datenbank, Aufruf zum Mitmachen. Durchführung von Vergleichsversuchen, Entwicklung einer fraktographischen Symbolik, Ringversuch, Vorhaben iFrakto mit Entwicklung einer KI-gestützten Bruchflächenanalyse.
Inconel 718 (IN718) is a traditional age-hardenable nickel-based alloy that has been increasingly processed by additive manufacturing (AM) in recent years. In the as-solidified condition, IN718 exhibits chemical segregation and the undesired Laves phase, requiring a solution annealing (SA) prior to aging. The material produced by AM does not respond to the established thermal routines in the same way as conventionally produced IN718, and there is still no consensus on which routine yields optimal results. This work aims to provide a fundamental understanding of the heat treatment (HT) response by continuously monitoring the microstructural evolution during SA via time-resolved synchrotron x-ray diffraction, complemented by ex-situ scanning electron microscopy (SEM). The samples were produced by laser powder bed fusion to a geometry of 10x20x90 mm³, from which Ø1x5 mm³ cylindric specimens were extracted. Two different scanning strategies – incremental 67° rotations, Rot, and alternating 0°/67° tracks, Alt – were used, leading to two different as-built conditions. 1-hour SAs were carried out in the beamline ID22 of the ESRF at 50 KeV. Two SA temperatures, SA1 = 1020 °C, and SA2 = 1080 °C were tested for each scanning strategy. Data were processed using the software PDIndexer. In the as-built state, all samples showed typical subgrain columnar cell structures with predominant Nb/Mo segregation and Laves phase at the cell walls, as seen by SEM. The Alt scan induced higher intensity on the Laves peaks than the Rot scan, suggesting a greater content of Laves. Chemical homogenization in the SA was largely achieved during the heating ramp (Fig. 1). SA2 eliminated the Laves peaks just before reaching 1080 °C, and mitigated differences between Rot and Alt samples. On the other hand, SA1 induced the precipitation of the generally detrimental δ phase, also observed by SEM. Furthermore, the Rot scan showed higher δ peak intensities than the Alt scan, indicating a higher content of δ in the latter. No signs of recrystallization were observed in any of the investigated SAs.