4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung
Filtern
Dokumenttyp
- Vortrag (93)
- Zeitschriftenartikel (56)
- Beitrag zu einem Tagungsband (15)
- Posterpräsentation (14)
- Buchkapitel (5)
- Tagungsband (Herausgeberschaft für den kompletten Band) (1)
- Dissertation (1)
- Forschungsbericht (1)
Schlagworte
- Recycling (24)
- Phosphor (20)
- Klärschlamm (17)
- Phosphorus (15)
- Phosphorrückgewinnung (14)
- Phosphorus recovery (14)
- Sewage sludge (12)
- Fertilizer (9)
- Klärschlammverordnung (9)
- Gichtgasschlamm (7)
- Scandium (7)
- BOFS (6)
- CFK (6)
- Environmental evaluation (6)
- Fertilzer (6)
- Hydraulic reactivity (6)
- Pyrometallurgy (6)
- Elektroofenstaub (5)
- Gypsum (5)
- Klärschlammasche (5)
- Lichtbogenofen (5)
- Portland Cement (5)
- Pyrometallurgie (5)
- Ressourcenrückgewinnung (5)
- Ringversuch (5)
- Sewage sludge ash (5)
- Tantal (5)
- Wastewater (5)
- XANES spectroscopy (5)
- Zement (5)
- Zink (5)
- Alite (4)
- Carbon Fibers (4)
- Circular economy (4)
- Diffusive Gradients in thin films (DGT) (4)
- Diffusive gradients in thin films (DGT) (4)
- Düngemittel (4)
- Dünger (4)
- Electric arc furnace dust (4)
- LD-Schlacke (4)
- Makronährstoffe (4)
- Nährstoffe (4)
- Phosphat (4)
- Red Mud (4)
- Stahlwerksschlacke (4)
- Steelmaking slag (4)
- Tantalum (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- Zinc (4)
- Baustoffrecycling (3)
- Bauxite Residue (3)
- Blast furnace sludge (3)
- CDW processing (3)
- Cabonfasern (3)
- Carbonfaser (3)
- DGT (3)
- Electric Arc Furnace (3)
- Gypsum recycling (3)
- Landwirtschaft (3)
- Laser-induced breakdown spectroscopy (3)
- Mantelverordnung (3)
- Phosphorus fertilizer (3)
- Recycling fertilizer (3)
- Rotschlamm (3)
- Sekundärrohstoffe (3)
- Selective chlorination (3)
- Soil (3)
- Steelmaking (3)
- Thermochemisch (3)
- X-ray diffraction (3)
- AbfKlärV (2)
- Abwasser (2)
- Abwasserbehandlung (2)
- Agronomic performance (2)
- Agronomische Effizienz (2)
- Alkalien (2)
- Aluminium (2)
- Ammonium (2)
- Analytik (2)
- AshDec (2)
- Ashdec (2)
- Bagasse (2)
- Bassanite (2)
- Building and Construction (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Carbide formation (2)
- Carbon feeding (2)
- Chromium (2)
- Clinker substitute (2)
- Combustion Ion Chromatography (2)
- Diffusive gradients in thin-films (DGT) (2)
- Filterstaub (2)
- Gypsum fiberboards and synthetic gypsum (2)
- Heavy metal removal (2)
- Infrared spectroscopy (2)
- Leaching (2)
- Leaching control mechanisms (2)
- Melting experiments (2)
- Monoverbrennung (2)
- Monoverbrennungsanlage (2)
- Nitrification inhibitor (2)
- Nutrient (2)
- P-Recyclingdünger (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Phopshorus recovery (2)
- Pollutant (2)
- Raman spectroscopy (2)
- Recovery (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Reproduzierbarkeit (2)
- SCALE (2)
- Scattering (2)
- Secondary Recources (2)
- Sewage sludge ordinance (2)
- Soil P species (2)
- Struvit (2)
- Struvite (2)
- Thermal treatment (2)
- Thermochemical treatment (2)
- Tricalcium-silicate (2)
- Tricalciumsilikat (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- XANES (2)
- Zementersatz (2)
- Zementklinker (2)
- Zinnschlacke (2)
- Zitronensäure (2)
- Abwasserreinigung (1)
- Aerodynamic levitation (1)
- Alit (1)
- Alite hydraulic reactivity (1)
- Ashes (1)
- BESSY (1)
- Bauxite residue (1)
- Bio-P-Kläranlage (1)
- Bioavailability (1)
- Bioceramics (1)
- Blast-furnace sludge (1)
- Bushveld Complex (1)
- CFRP (1)
- CaNaPO4 (1)
- Calcium carbonate (1)
- Carbonbeton (1)
- Carbonfasern (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemische Löslichkeit (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Co-combustion (1)
- Combustion and gasification (1)
- Controlled release fertilisers (1)
- Corrosion (1)
- Critical raw materials (1)
- Crystalline phase identification (1)
- DGT-Methode (1)
- Design of experiments (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- EAF slags (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Elektrolichtbogenofen (1)
- Elimination (1)
- Entropy (1)
- Extraction (1)
- Extraktion (1)
- Extraktionen (1)
- Extraktionsversuche (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Forest soils (1)
- Formation enthalpy (1)
- Forschungsförderung (1)
- Fällmittel (1)
- General Environmental Science (1)
- General Materials Science (1)
- Gesteinskörnungen (1)
- Gipsabfälle (1)
- Gipsrecycling (1)
- Gleichwertigkeit Messverfahren (1)
- Granulat (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Hazardous waste (1)
- Hazenite (1)
- Heat capacity (1)
- Hydration products (1)
- Hydrogen (1)
- ICP-MS (1)
- ICP-OES (1)
- In situ (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ analysis (1)
- Incubated soil/fertilizer mixtures (1)
- Industrial and Manufacturing Engineering (1)
- Industrielles Abwasser (1)
- Interlaboratory comparison (1)
- Iron making (1)
- Klimaneutralität (1)
- Kläranlage (1)
- Klärschlammdüngung (1)
- Kreislaufwirtschaft (1)
- LCA (1)
- Landwirtschaftliche Klärschlammverwertung (1)
- Lead (1)
- Lebensmittelindustrie (1)
- Leichtbau (1)
- Lightweighting (1)
- MSWI fly ash (1)
- Materials Chemistry (1)
- Mechanische Stabilität (1)
- Metals and Alloys (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Multidisciplinary (1)
- Municipal sewage sludge (1)
- MySpot (1)
- Nachhaltigkeit (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Neutralammoniumcitrat (1)
- Neutralammoniumnitrat (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen (1)
- On-Line Analyse (1)
- On-line analysis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-Recyclate (1)
- P-Rückgewinnung (1)
- P-Senken (1)
- P-efficiency (1)
- P-recovery (1)
- Passive sampling (1)
- Permeat (1)
- Perowskit (1)
- Pflanzenverfügbarkeit (1)
- Pflanzenwurzel (1)
- Phase formation (1)
- Phase transformation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphor-Rückgewinnung (1)
- Phosphorbestimmung (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photometric P determination (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Platinum (1)
- Pot experiment (1)
- Pot experiments (1)
- Process Metallurgy (1)
- Process control (1)
- Process upscaling (1)
- Push-out Test (1)
- Raman (1)
- Recovery potential (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Recyclingdüngemittel (1)
- Red mud (1)
- Reduction (1)
- Reduktionsprozess (1)
- Relative agronomische Effizienz (RAE) (1)
- Renewable Energy, Sustainability and the Environment (1)
- Resource Recovery (1)
- Ressourceneffizienz (1)
- Ressourcenschonung (1)
- Retentat (1)
- Rhenanite (1)
- Ringversuch P-Gehalt in Klärschlamm (1)
- Rückgewinnung (1)
- Sc recovery (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schlacke (1)
- Secondary P-fertilizer (1)
- Sekundärgipse (1)
- Sekundärrohstoff (1)
- Selective Chlorination (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Silicate (1)
- Silicon carbide (1)
- Spectroscopy (1)
- Stalwerksschlacke (1)
- Steelmaking residues (1)
- Strategy and Management (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sustainability (1)
- Synchrotron (1)
- Synchrotron radiation (1)
- Technologietransfer (1)
- Thermal analysis (1)
- Thermochemische Prozesse (1)
- Upscaling (1)
- Ureolytic bacteria (1)
- Vegetationsversuche (1)
- Versuchskampagne (1)
- Wasserstoffplasma (1)
- Waste (1)
- Waste water (1)
- Waste water treatment (1)
- Wiederholbarkeit (1)
- Wiederverwertung (1)
- Wood ash (1)
- X-ray diffraction (XRD) (1)
- X-ray spectroscopy (1)
- Zentrat (1)
- Zinc chloride (1)
- Zinnschlacken (1)
- fertilizer (1)
- infrared spectroscopy (1)
- microspectroscopy (1)
- multi scale testing (1)
- soil (1)
- thermochemische Behandlung (1)
- x-ray diffraction (1)
- Ökobilanz (1)
Organisationseinheit der BAM
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (186) (entfernen)
Paper des Monats
- ja (3)
AbstractRed mud is the waste of bauxite refinement into alumina, the feedstock for aluminium production1. With about 180 million tonnes produced per year1, red mud has amassed to one of the largest environmentally hazardous waste products, with the staggering amount of 4 billion tonnes accumulated on a global scale1. Here we present how this red mud can be turned into valuable and sustainable feedstock for ironmaking using fossil-free hydrogen-plasma-based reduction, thus mitigating a part of the steel-related carbon dioxide emissions by making it available for the production of several hundred million tonnes of green steel. The process proceeds through rapid liquid-state reduction, chemical partitioning, as well as density-driven and viscosity-driven separation between metal and oxides. We show the underlying chemical reactions, pH-neutralization processes and phase transformations during this surprisingly simple and fast reduction method. The approach establishes a sustainable toxic-waste treatment from aluminium production through using red mud as feedstock to mitigate greenhouse gas emissions from steelmaking.
Fused cement clinker can be produced from molten basic oxygen furnace slag (BOFS) by way of a reductive thermochemical treatment. During the thermochemical treatment, oxidic iron is reduced to metallic iron and separated. The resulting low-iron slag has a chemical and mineralogical composition similar to ordinary Portland cement (OPC) clinker. In this study, the hydraulic reactivity of the fused clinker from BOFS with and without gypsum was investigated using isothermal calorimetry, differential scanning calorimetry, in situ X-ray diffraction and powder X-ray diffraction. Furthermore, a synthetic fused clinker without foreign ions and fused clinker produced by a mixture of both materials was studied. The hydraulic reaction of the fused clinker from BOFS was considerably slower than that of OPC. However, the reaction can be accelerated by adding gypsum as a sulfate carrier. Furthermore, the results showed an increased reaction rate with decreasing content of foreign ions such as Fe, P or Mn.
Re-melting of scrap in an electric arc furnace (EAF) results in the accumulation of filter dust from off-gas treatment that predominantly consists of iron and zinc oxides. Filter dust is classified as hazardous waste due to its high contents of potentially toxic or ecotoxic elements such as Pb, Cr, Cd, and As. A promising processing route for this waste is selective chlorination, in which the non-ferrous metal oxides are chlorinated and selectively evaporated in form of their respective chlorides from the remaining solids via the process gas flow. Here, we investigate stepwise thermochemical treatment of EAF dust with either waste iron(II) chloride solution or hydrochloric acid at 650, 800, and 1100 ◦C. The Zn and Pb contents of the thermochemically processed EAF dust could be lowered from 29.9% and 1.63% to 0.09% and 0.004%, respectively. Stepwise heating allowed high separation between zinc chloride at the 650 ◦C step and sodium-, potassium-, and lead-containing chlorides at higher temperatures. Furthermore, the lab-scale results were transferred to the use of an experimental rotary kiln highlighting the possibilities of upscaling the presented process. Selective chlorination of EAF dust with liquid chlorine donors is, therefore, suggested as a potential recycling method for Zn-enriched steelworks dusts.
Calcium sulfate hemihydrate (CaSO4ᐧ0.5H2O), also known as bassanite, has been used as a precursor to produce gypsum (dihydrate, CaSO4ᐧ2H2O) for various construction and decorative purposes since prehistoric times. The main route to obtain hemihydrate is a thermal treatment of gypsum at temperatures typically between 150 °C and 200 °C to remove some of the structural water.
In this contribution, we introduce (Fig. 1) a more efficient and sustainable method (T < 100 °C) that enables the direct, rapid, and reversibly conversion of gypsum to bassanite using reusable high salinity aqueous solutions (brines with c[NaCl] > 4 M). The optimum conditions for the efficientproduction of bassanite in a short time (< 5 min) involve the use of brines with c(NaCl) > 4 M and maintaining a temperature, T > 80 °C. When the solution containing bassanite crystals is cooled down to around room temperature, eventually gypsum is formed. When the temperature is raised again to T > 80 °C, bassanite is rapidly re-precipitated. This contrasts with the typical behaviour of the bassanite phase in low salt environments.
Traditionally, hemihydrate is obtained through a solid state thermal treatment because bassanite is considered to be metastable with respect to gypsum and anhydrite in aqueous solutions, and therefore gypsum-to-bassanite conversion should not occur in water. Its very occurrence actually contradicts numerical thermodynamic predictions regarding solubility of calcium sulfate phases. By following the evolution of crystalline phases with in situ and time-resolved X-ray diffraction/scattering and Raman spectroscopy, we demonstrated that the phase stability in brines at elevated temperatures is inaccurately represented in the thermodynamic databases. Most notably for c(NaCl) > 4 M, and T > 80 °C gypsum becomes readily more soluble than bassanite, which induces the direct precipitation of the latter from gypsum. The fact that these transformations are controlled by the solution provides extensive opportunities for precise manipulation of crystal formation. Our experiments confirmed that bassanite remained the sole crystalline structure for many hours before reverting into gypsum. This property is extremely advantageous for practical processing and efficient crystal extraction in industrial scenarios.
Steelmaking slag is a by-product of steel production, of which 4.5 Mt were produced in 2020 in Germany alone. It is mainly used in road construction, earthwork and hydraulic engineering. A smaller part is returned to the metallurgical cycle, used as fertiliser or landfilled.
With this use, iron oxides still contained in steelmaking slag are lost. In addition, the possibility of producing higher-grade products from steelmaking slag is foregone. In recent decades, many researchers have investigated the production of Portland cement clinker and crude iron from basic oxygen furnace slags (BOFS) via a reductive treatment. Carbothermal treatment of liquid BOFS causes a reduction of iron oxides to metallic iron, which separates from the mineral phase due to its higher density. Simultaneously, the chemical composition of the reduced slag is adapted to that of Portland cement clinker.
In this study, German BOFS was reduced in a small-scale electric arc furnace using petrol coke as a reducing agent. The resulting low-iron mineral product has a similar chemical composition to Portland cement clinker and was rich in the tricalcium silicate solid solution alite (Ca3SiO5). Based on its chemical and mineralogical composition, similar to that of Portland cement clinker, the reduced BOFS has the potential to react comparably. In our study, the reduced BOFS produced less hydration heat than OPC, and its hydraulic reaction was delayed. However, adding gypsum has shown to accelerate the hydration rate of the reduced BOFS compared to that known from the calcium silicates of Portland cement clinker.
Further research to improve the hydraulic properties of the reduced slag is essential. If successful, producing a hydraulic binder and crude iron from BOFS has economic and ecological benefits for both the cement and steel industries.
Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given.
Neben Ressourceneinsparungen in der Produktion sorgen moderne Leichtbauwerkstoffe und -technologien für Energieeinsparungen in der Nutzungsphase. Auf diese Weise sowie als Enabler für eine Vielzahl an Zukunftstechnologien, wie zum Beispiel erneuerbare Energien, Elektromobilität und die Wasserstoffwirtschaft, ist Leichtbau fundamental für die Entkopplung des Wirtschaftswachstums vom Ressourcenverbrauch, die Erreichung der Ziele des Green Deals und eine Nachhaltige Zukunft. Um marktnahe Potentiale für Klima- und Ressourcenschutz vollständig zu heben und Herausforderungen wie die Kreislauffähigkeit im Leichtbau aktiv zu adressieren, fördert das BMWK marktnahe Innovationen im Leichtbau mit den Technologietransfer-Programm Leichtbau (TTP LB) Auch für die BAM bietet das TTP LB interessante Möglichkeiten, Forschungsvorhaben umzusetzen. Derzeit werden vier Projekte mit BAM-Beteiligung gefördert. In diesem Webinar stellen wir Ihnen die gesamte Breite des Leichtbaus vor und zeigen Ihnen damit direkte Anknüpfungspunkte zu Ihrer Forschung. Dafür wird das TTP LB vorgestellt, werden wertvolle Einblicke zur Antragstellung gegeben und der Weg zum Erfolg wird am Beispiel des BAM-Projektes SmartWeld skizziert. Neben der Erläuterung von technischen Details und formalen Anforderungen des Förderprogramms möchten wir ebenfalls versuchen, einen kleinen Ausblick auf mögliche zukünftige Entwicklungen zu geben.
Obwohl der Leichtbau mit carbonfaserverstärkten Kunststoffen (CFK) einen wichtigen Beitrag zum Klimaschutz und zur Ressourceneffizienz liefert, stellt der wachsende Abfallstrom von aktuell 62 kt/a eine große Herausforderung dar. Weil die Produktion von Carbonfasern (CF) überwiegend auf fossilen Rohstoffen basiert und sehr energieintensiv ist, werden nachhaltige Recyclinglösungen dringend benötigt.
Hier geben wir einen Überblick über aktuelle Recyclingprozesse und diskutieren deren Limitierungen. Darüber hinaus zeigen wir eine Möglichkeit zur sicheren chemischen Nutzung von CF-haltigen Reststoffen auf, die nicht zur Wiederverwertung geeignet sind. Das Projekt CF Pyro untersucht deren Einsatz als Sekundärrohstoff in der Pyrometallurgie und setzt besondere Schwerpunkte bei der Reaktivität von CF, der Prozessstabilität und der Vermeidung von Emissionen gesundheitsschädlicher WHO-Fasern. Neben der Vorstellung von wichtigen fundamentalen experimentellen Erkenntnissen wird ihre Bedeutung für den Wandel zum zirkulären Wirtschaften diskutiert.