4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung
Filtern
Dokumenttyp
Sprache
- Englisch (107) (entfernen)
Schlagworte
- Phosphorus (14)
- Phosphorus recovery (14)
- Sewage sludge (12)
- Recycling (10)
- Fertilizer (8)
- BOFS (6)
- Fertilzer (6)
- Hydraulic reactivity (6)
- Scandium (6)
- Portland Cement (5)
- Pyrometallurgy (5)
- Sewage sludge ash (5)
- Wastewater (5)
- XANES spectroscopy (5)
- Alite (4)
- Circular economy (4)
- Diffusive gradients in thin films (DGT) (4)
- Electric arc furnace dust (4)
- Environmental evaluation (4)
- Gypsum (4)
- Red Mud (4)
- Steelmaking slag (4)
- Tantalum (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- Zinc (4)
- Bauxite Residue (3)
- Blast furnace sludge (3)
- Carbon Fibers (3)
- Diffusive Gradients in thin films (DGT) (3)
- Phosphorus fertilizer (3)
- Recycling fertilizer (3)
- Selective chlorination (3)
- Soil (3)
- X-ray diffraction (3)
- Agronomic performance (2)
- Ammonium (2)
- AshDec (2)
- Bagasse (2)
- Bassanite (2)
- Building and Construction (2)
- CDW processing (2)
- CFK (2)
- Cabonfasern (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Carbide formation (2)
- Carbon feeding (2)
- Chromium (2)
- Clinker substitute (2)
- Combustion Ion Chromatography (2)
- DGT (2)
- Diffusive gradients in thin-films (DGT) (2)
- Electric Arc Furnace (2)
- Elektroofenstaub (2)
- Gichtgasschlamm (2)
- Gypsum recycling (2)
- Heavy metal removal (2)
- Infrared spectroscopy (2)
- Laser-induced breakdown spectroscopy (2)
- Leaching (2)
- Leaching control mechanisms (2)
- Melting experiments (2)
- Nitrification inhibitor (2)
- Nutrient (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Phopshorus recovery (2)
- Pollutant (2)
- Raman spectroscopy (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Ressourcenrückgewinnung (2)
- Scattering (2)
- Sewage sludge ordinance (2)
- Soil P species (2)
- Steelmaking (2)
- Struvite (2)
- Thermal treatment (2)
- Thermochemical treatment (2)
- Tricalcium-silicate (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- XANES (2)
- Zink (2)
- Aerodynamic levitation (1)
- Alite hydraulic reactivity (1)
- Aluminium (1)
- Ashdec (1)
- BESSY (1)
- Bauxite residue (1)
- Bioavailability (1)
- Bioceramics (1)
- Blast-furnace sludge (1)
- Bushveld Complex (1)
- CFRP (1)
- CaNaPO4 (1)
- Calcium carbonate (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Co-combustion (1)
- Combustion and gasification (1)
- Controlled release fertilisers (1)
- Corrosion (1)
- Critical raw materials (1)
- Crystalline phase identification (1)
- Design of experiments (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- EAF slags (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Entropy (1)
- Extraction (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Forest soils (1)
- Formation enthalpy (1)
- General Environmental Science (1)
- General Materials Science (1)
- Granulat (1)
- Gypsum fiberboards and synthetic gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- Hazardous waste (1)
- Hazenite (1)
- Heat capacity (1)
- Hydration products (1)
- Hydrogen (1)
- ICP-MS (1)
- ICP-OES (1)
- In situ (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ analysis (1)
- Incubated soil/fertilizer mixtures (1)
- Industrial and Manufacturing Engineering (1)
- Interlaboratory comparison (1)
- Iron making (1)
- LCA (1)
- Lead (1)
- Lightweighting (1)
- MSWI fly ash (1)
- Materials Chemistry (1)
- Mechanische Stabilität (1)
- Metals and Alloys (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Multidisciplinary (1)
- Municipal sewage sludge (1)
- MySpot (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen (1)
- Nährstoffe (1)
- On-line analysis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P-recovery (1)
- Passive sampling (1)
- Phase formation (1)
- Phase transformation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photometric P determination (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Platinum (1)
- Pot experiment (1)
- Pot experiments (1)
- Process Metallurgy (1)
- Process control (1)
- Process upscaling (1)
- Push-out Test (1)
- Raman (1)
- Recovery (1)
- Recovery potential (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red mud (1)
- Reduction (1)
- Renewable Energy, Sustainability and the Environment (1)
- Resource Recovery (1)
- Rhenanite (1)
- SCALE (1)
- Sc recovery (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Secondary P-fertilizer (1)
- Secondary Recources (1)
- Selective Chlorination (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Silicate (1)
- Silicon carbide (1)
- Spectroscopy (1)
- Steelmaking residues (1)
- Strategy and Management (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sustainability (1)
- Synchrotron (1)
- Synchrotron radiation (1)
- Thermal analysis (1)
- Ureolytic bacteria (1)
- Waste water (1)
- Waste water treatment (1)
- Wood ash (1)
- X-ray diffraction (XRD) (1)
- X-ray spectroscopy (1)
- Zinc chloride (1)
- fertilizer (1)
- infrared spectroscopy (1)
- microspectroscopy (1)
- multi scale testing (1)
- soil (1)
- x-ray diffraction (1)
Organisationseinheit der BAM
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (107) (entfernen)
Paper des Monats
- ja (3)
Eingeladener Vortrag
- nein (40)
Phosphorus (P) resource availability is declining and the efficiency of applied nutrients in agricultural soils is becoming increasingly important. This is especially true for P-fertilizers from recycled materials which often have a lower plant-availability compared to commercial P-fertilizers but are expected to play an increasingly important role into the future (Kratz et al. 2019). One promising way to increase the plant-availability of the fertilizer P is a co-fertilization with specific nitrogen (N) forms which can enhance the P uptake and make P-fertilizers from recycled material more competitive to commercial phosphate rock-based P-fertilizers (Rahmatullah et al. 2006; Vogel et al. 2018). To investigate this effect, we performed a pot experiment with three different P-fertilizers (sewage sludge-based, phosphate rock and triple superphosphate) and ammonium nitrate sulfate as a co-fertilizer, without and with a nitrification inhibitor (NI), and analyzed the form of N and P in soil via a suite of chemical and novel X-ray spectroscopic methods. The application of NI with the P and N fertilizers led to a higher dry matter yield and a higher P uptake of maize. Novel N K-edge micro-X-ray absorption near-edge structure (micro-XANES) spectroscopy identified that the application of a NI promotes the temporary formation of a non-exchangeable N in detectable hot-spots in the soil. The subsequent slow release and prolonged availability of N during plant growth leads to higher yield and nutrient uptake. It can be concluded that NIs lead to a temporary fixation of ammonium-N in a pool that can be accessed by plant roots. Those types of available nutrient pools meet the idea of so-called “next generation fertilizers” as plants have access to nutrients according to their current demand.
A wide range of methods are used to estimate the plant-availability of soil phosphorus (P). Published research has shown that the diffusive gradients in thin films (DGT) technique has a superior correlation to plant-available P in soils compared to standard chemical extraction tests. In order to identify the plant-available soil P species, we combined DGT with infrared and P K- and L-edge X-ray adsorption near-edge structure (XANES) spectroscopy. This was achieved by spectroscopically investigating the dried binding layer of DGT devices after soil deployment. All three spectroscopic methods were able to distinguish between different kinds of phosphates (poly-, trimeta-, pyro- and orthophosphate) on the DGT binding layer. However, infrared spectroscopy was most sensitive to distinguish between different types of adsorbed inorganic and organic phosphates. Additionally, also intermediates of the time-resolved hydrolysis of trimetaphosphate in soil could be analyzed. Furthermore, infrared and XANES microspectroscopy make it also possible to analyze P compounds on the binding layer with a lateral resolution down to 1 µm2. Therefore, P species of a spatial soil segment (e.g. rhizosphere) can be mapped and analyzed.
Phosphorus (P) plays an essential role in the global food security. However, the global P reservoirs have a statistic lifetime of about 385 years only. Due to the scarcity of P and the increasing world population an efficient and sustainable recycling management is required. A few biogenic waste materials are high in P contents such as sewage sludge and meat and bone meal. Thus, they are suitable for P recycling and fertilizer production. But besides the high P content sewage sludge is often highly contaminated with organic pollutants and toxic heavy metals which have to be eliminated before agricultural field application. In this presentation we show the potential of sewage sludge as secondary resource for fertilizers. This includes our developments in thermochemical processes for the production of novel P-fertilizers from recycled materials. Furthermore, for these novel P-fertilizers common extraction tests to determine the plant-available P are often unusable. Therefore, we successfully applied the Diffusive gradients in thin-films (DGT) techniques to analyse the plant-availability of P-fertilizers from recycled materials.
The amount of plant-available phosphorus (P) in soil strongly influences the yield of plants in agriculture. Therefore, various simple chemical extraction methods have been developed to estimate the plant-available P pools in soil. More recently, several experiments with the DGT technique have shown that it has a much better correlation to plant-available P in soils than standard chemical extraction methods (e.g. calcium-acetate-lactate (CAL), Colwell, Olsen, water) when soils with different characteristics are considered. However, the DGT technique cannot give information on the plant-available P species in the soil. Therefore, we combined DGT with solution 31P nuclear magnetic resonance (NMR) spectroscopy. This was achieved by using a modified DGT device in which the diffusive layer had a larger pore size, the binding layer incorporated an adsorption material with a higher capacity, and the device had a larger exposure area. The spectroscopic investigation was undertaken after elution of the deployed DGT binding layer in a NaOH solution. Adsorption tests using solutions of known organic P compounds showed that a sufficient amount of these compounds could be adsorbed on the binding layer in order for them to be analyzed by solution 31P NMR spectroscopy. Furthermore, various intermediates of the hydrolysis of trimetaphosphate in soil could be also analyzed over time.
Per- and polyfluoroalkyl substances (PFAS) are chemicals which were developed to improve humanity’s quality of life. Due to their high chemical stability and resistance to degradation by heat or acids, PFAS were used in a variety of consumer products. The continuous use of PFAS in household products and the discharge of PFAS from industrial plants into the sewer system resulted in the contamination of effluents and sewage sludge from wastewater treatment plants (WWTPs) (Roesch et al. 2022). Since sewage sludge is often used as fertilizer, its application on agricultural soils has been observed as a significant entry path for PFAS into the environment, specifically in our food chain. In Germany the sewage sludge/biosolid application on agricultural land was banned with the amendment of the German Sewage Sludge Ordinance and by 2029 sewage sludge application will be totally prohibited. However, phosphorus (P) from sewage sludge should still be recycled in WWTPs of cities with a population larger than 50,000 residents. To produce high-quality P-fertilizers for a circular economy, PFAS and other pollutants (e.g. pesticides and pharmaceuticals) must be separated from sewage sludge. Due to the strong diversity of industrial PFAS usage it is not clear if a safe application of novel recycled P-fertilizers from WWTPs can be guaranteed. Therefore, we analyzed various sewage sludges and wastewater-based fertilizers. Sewage sludge (SL) samples from various WWTPs in Germany and Switzerland, six sewage sludge ashes (SSA) from Germany, six thermally treated SL and SSA samples with different additives (temperatures: 700-1050 °C), two pyrolyzed SL samples (temperature: 400 °C) and two struvite samples from Germany and Canada were analyzed. The goal was to quantify PFAS in sewage sludges and wastewater-based P-fertilizers with the sum parameter extractable organic fluorine (EOF) by combustion ion chromatography (CIC). The results were compared with data from classical LC-MS/MS target analysis as well as selected samples by HR-MS suspect screening. The EOF values of the SLs mainly range between 154 and 538 µg/kg except for one SL which showed an elevated EOF value of 7209 µg/kg due to high organofluorine contamination. For the SSA samples the EOF values were lower and values between LOQ (approx. 60 µg/kg) and 121 µg/kg could be detected. For the pyrolyzed SLs no EOF values above the LOQ were detected. Moreover, the two wastewater-based struvite fertilizers contain 96 and 112 µg/kg EOF, respectively. In contrast to the EOF values, the sum of PFAS target values were relatively low for all SLs. Additional applied PFAS HR-MS suspect screening aimed to tentatively identify PFAS that could contribute to the hitherto unknown part of the EOF value. The majority of the detected fluorinated compounds are legacy PFAS such as short- and long-chain perfluorocarboxylic acids (PFCA), perfluorosulfonic acids (PFSA), polyfluoroalkyl phosphate esters (PAPs) and perfluorophosphonic acids (PFPA). Moreover, fluorinated pesticides, pharmaceutical as well as aromatic compounds were also identified, which are all included in the EOF parameter. Our research revealed that the current PFAS limit of 100 µg/kg for the sum of PFOS + PFOA in the German Fertilizer Ordinance is no longer up to date. Since the number of known PFAS already exceeds 10,000, the ordinance limit should be updated accordingly. Recent regulations and restrictions on using long-chain PFAS (≥C8) have resulted in a significant shift in the industry towards (ultra-)short-chain alternatives, and other, partly unknown, emerging PFAS. Ultimately, also fluorinated pesticides and pharmaceuticals, which end up as ultrashort PFAS in the WWTPs, have to be considered as possible pollutants in fertilizers from wastewater, too.
Lightweighting as a cross-cutting technology contributes significantly to achieve the European Green Deal goals. Based on, but not limited to, advanced materials and production technologies, the demand for natural resources and CO2 emmissions are reduced by lightweighting during production, as well as use phase. Therefore, lightweighting is a crucial transformation technology assisting in decoupling economic growth from resource consumption. In this manner, lightweighting contributes significantly as a key technology of relevance for many industrial sectors such as energy, mobility, and infrastructure, towards resource efficiency, climate action and economic strength, as well as a resilient Europe. To strengthen international partnerships, addressing global issues of today at the edge of science with high performance lightweight material based on carbon fibers, an overview about the BAM expertise in carbon fiber reinforced materials is given.
Tantalum and niobium are essential for the development of electronics towards a more and more compact design, but without reducing their performance today. Especially in smart phones and tablets, tantalum and niobium capacitors with high charge densities have already become almost indispensable. However, tantalum as a critical raw material is still a problem for the sustainable production of electronics. Due to this fact, the existence of efficient recycling processes especially in Europe is becoming even more important nowadays.
The Bundesanstalt für Materialforschung und -prüfung (BAM) is currently working on the optimisation of an existing pyrometallurgical tantalum recycling process. Optimisation of this industrial process is carried out in a small-scale electric arc furnace (480 kVA, capacity approx. 150 kg/h) at BAM using a new and innovative equipment for on-line analysis of high temperature processes.
The aim of this project is to identify the best timing for an optimum slag tapping, when the slag is lower than minimum targeted tantalum concentration. Hence, LIBS (Laser induced breakdown spectroscopy) is used to identify the chemical composition of the slag layer and during slag tapping. The on-line-LIBS prototype of BAM enables an in-situ measurement of the element distribution in the melt after calibration on the slag system.
First results of this joint research project will be presented including LIBS-measurements and thermodynamic and kinetic aspects of the process.
An existing pyrometallurgical process for tantalum and niobium recovery, mainly from low grade pyrometallurgical residues, was investigated. Series of melting experiments were carried out in a pilot-scale electric arc furnace to study how the amount, the grain size and the way of feeding affect the activity of carbon as a reducing agent. During the pyrometallurgical treatment refractory metals such as tantalum and niobium are reduced to their carbide form and enriched in the molten iron-based metal phase. The cooled down slag and metal phase were analysed to investigate thermodynamic and kinetic conditions of the carbide formation. FACT Sage simulations were also used to investigate the material system in state of thermodynamic equilibrium. Results show that mass transfer and kinetics may play an important role if compared to equilibrium analyses using FACT Sage.
Tantalum and niobium are essential for the development of electronics towards a more and more compact design, but without reducing their performance today. Especially in smart phones and tablets, tantalum and niobium capacitors with high charge densities have already become almost indispensable. However, tantalum as a critical raw material is still a problem for the sustainable production of electronics. Due to this fact, the existence of efficient recycling processes especially in Europe is becoming even more important nowadays.
The Bundesanstalt für Materialforschung und -prüfung (BAM) is currently working on the optimisation of an existing pyrometallurgical tantalum recycling process. Optimisation of this industrial process is carried out in a small-scale electric arc furnace (480 kVA, capacity approx. 150 kg/h) at BAM using a new and innovative equipment for on-line analysis of high temperature processes.
The aim of this project is to identify the best timing for an optimum slag tapping, when the slag is lower than minimum targeted tantalum concentration. Hence, LIBS (Laser induced breakdown spectroscopy) is used to identify the chemical composition of the slag layer and during slag tapping. The on-line-LIBS prototype of BAM enables an in-situ measurement of the element distribution in the melt after calibration on the slag system.
First results of this joint research project will be presented including on-line-LIBS-measurements and thermodynamic and kinetic aspects of the process.
An existing pyrometallurgical process for tantalum and niobium recovery, mainly from low grade pyrometallurgical residues, was investigated. Series of melting experiments were carried out in a pilot-scale electric arc furnace to study how the amount, the grain size and the way of feeding affect the activity of carbon as a reducing agent. During the pyrometallurgical treatment refractory metals such as tantalum and niobium are reduced to their carbide form and enriched in the molten iron-based metal phase. The cooled down slag and metal phase were analysed to investigate thermodynamic and kinetic conditions of the carbide formation. FACT Sage simulations were also used to investigate the material system in state of thermodynamic equilibrium. Results show that mass transfer and kinetics may play an important role if compared to equilibrium analyses using FACT Sage.