4 Material und Umwelt
Filtern
Dokumenttyp
- Vortrag (440) (entfernen)
Sprache
- Englisch (279)
- Deutsch (155)
- Spanisch (4)
- Französisch (2)
Referierte Publikation
- nein (440)
Schlagworte
- Biocides (20)
- Antimicrobial resistance (19)
- Nano (18)
- Recycling (17)
- Ink (16)
- MIC (14)
- Biofilms (12)
- Phosphor (12)
- XRF (12)
- Klärschlamm (11)
- PFAS (11)
- Phosphorrückgewinnung (11)
- Nanomaterial (10)
- OECD (10)
- Antimicrobial coating (9)
- Bacteria (9)
- Corrosion (9)
- Deponie (9)
- Evolution (9)
- Leaching (9)
- Per- and Polyfluoroalkyl substances (PFAS) (8)
- Risk assessment (8)
- VOC (8)
- Microbiologically influenced corrosion (7)
- Phosphorus recovery (7)
- Standardization (7)
- Archaeometry (6)
- Black fungi (6)
- CFK (6)
- E. coli (6)
- Emission (6)
- Manuscript (6)
- Manuscripts (6)
- Methanogens (6)
- Nanopartikel (6)
- Ringversuch (6)
- Rostasche (6)
- Sewage sludge (6)
- Soil (6)
- Termite (6)
- Aerosol (5)
- BBodSchV (5)
- BOFS (5)
- Bauprodukte (5)
- Disinfection (5)
- Genetics (5)
- Geokunststoffe (5)
- Gichtgasschlamm (5)
- Humboldt Codices (5)
- Hydraulic reactivity (5)
- Indoor air quality (5)
- Klärschlammverordnung (5)
- NAP-XPS (5)
- Papier (5)
- Sekundärrohstoffe (5)
- Tolerance (5)
- XANES spectroscopy (5)
- Alginate (4)
- BEMMA (4)
- Biocide (4)
- Biofilm (4)
- Bodenmaterial (4)
- Bundesoberbehörden (4)
- Carbon Fibers (4)
- Cascade impactor (4)
- Coptic (4)
- Dünger (4)
- EN 16516 (4)
- Ecotoxicity (4)
- Elektroofenstaub (4)
- Emission reference materials (4)
- Fungus (4)
- Inks (4)
- Kunststoffdichtungsbahn (4)
- Kunststoffdichtungsbahnen (4)
- Melanin (4)
- Museum (4)
- PAK (4)
- Phosphorus (4)
- Pigments (4)
- Prüfrichtlinie (4)
- Pyrometallurgy (4)
- Raman spectroscopy (4)
- Ressourcenrückgewinnung (4)
- Reverse glass painting (4)
- TXRF (4)
- Transformation (4)
- Verwertung (4)
- X-ray absorption near-edge structure (XANES) spectroscopy (4)
- ZfP (4)
- Zink (4)
- Analytik (3)
- Antibiotics (3)
- Antimikrobielle Resistenz (3)
- Antmikrobielle Oberflächen (3)
- Archaea (3)
- Baustoffrecycling (3)
- Beschleunigte Alterung (3)
- Biozide (3)
- CIC (3)
- Cabonfasern (3)
- Carbon steel (3)
- Carbonfaser (3)
- Combustion ion chromatography (3)
- Cultural heritage (3)
- DRIFTS (3)
- Düngemittel (3)
- EOF (3)
- Electric Arc Furnace (3)
- Environmental evaluation (3)
- Environmental simulation (3)
- Fertilizer (3)
- Formaldehyd (3)
- Geogitter (3)
- Glutaraldehyde (3)
- Gypsum (3)
- HP14 (3)
- Heterogeneity (3)
- Holzschutz (3)
- ISO 16000-6 (3)
- Immune gene family (3)
- Immunity (3)
- Ink analyses (3)
- Iron-gall ink (3)
- Klärschlammasche (3)
- Knufia petricola (3)
- Korrosion (3)
- Kulturgut (3)
- Light (3)
- Makronährstoffe (3)
- Mantelverordnung (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Methanogen (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiology (3)
- Mikroplastik (3)
- Non destructive analytical techniques (3)
- Nährstoffe (3)
- PFC (3)
- Phenotypic diversity (3)
- Pigment (3)
- Portland Cement (3)
- Pyrometallurgie (3)
- Recycling materials (3)
- Remediation (3)
- Resistance (3)
- Robustness studies (3)
- Spectroscopy (3)
- Standardisierung (3)
- Steelmaking (3)
- Sulfate reducing bacteria (3)
- Test guideline (3)
- VVOCs (3)
- Virus (3)
- XANES (3)
- XRF analysis (3)
- Zement (3)
- 3D printing (2)
- AbfKlärV (2)
- Air quality monitoring (2)
- Analytical method (2)
- Antimicrobial surfaces (2)
- Arabic Recipes (2)
- Architecture (2)
- Archäometrie (2)
- Ashdec (2)
- Bauxite Residue (2)
- Behördenklausurtagung (2)
- Bio-weathering (2)
- Biocide tolerance (2)
- Black fungus (2)
- Böden (2)
- CDW processing (2)
- CSMC (2)
- Cairo Genizah (2)
- Chemical analysis (2)
- Chemical durability (2)
- Chinese paper (2)
- Combustion Ion Chromatography (2)
- Construction products (2)
- Corrosion products (2)
- Cross-resistance (2)
- DGT (2)
- Deponien (2)
- Dichtungskontrollsysteme (2)
- Diffusive gradients in thin-films (DGT) (2)
- Disinfectants (2)
- Element mass concentration (2)
- Elutionsverhalten (2)
- Emerging (2)
- Emission reference material (2)
- Environmental Simulation (2)
- Eusociality (2)
- Extremotolerance (2)
- FFF-3D-Printer (2)
- FTIR (2)
- Fungal biofilms (2)
- Fungi (2)
- Genomics (2)
- Geosynthetics (2)
- Geruch (2)
- Glass (2)
- Group defence (2)
- Größenbestimmung (2)
- HI-Tension (2)
- Horizontal gene transfer (2)
- Hydrogen (2)
- ICP-MS (2)
- IPM (2)
- In-situ analysis (2)
- Ink composition (2)
- Inkwells (2)
- Interdisciplinary (2)
- Knufia (2)
- Kreislaufwirtschaft (2)
- Kunststoffrasen (2)
- LA-ICP-MS (2)
- LD-Schlacke (2)
- Landwirtschaft (2)
- Laser-induced breakdown spectroscopy (2)
- Laser-induced periodic surface structures (LIPSS) (2)
- Lichtbogenofen (2)
- Low melting (2)
- Luft (2)
- Lysimeter (2)
- Manuscript studies (2)
- Metabolism (2)
- Microbial (2)
- Microbiome (2)
- Microplastics (2)
- Middle Ages (2)
- Mikrobiell beeinflusste Korrosion (2)
- Mikroorganismen (2)
- Modelling studies (2)
- Monoverbrennungsanlage (2)
- Museum Pests (2)
- Mutation rate (2)
- Nanofasern (2)
- Nanomaterialien (2)
- Nanomaterials (2)
- Normung (2)
- Olivine (2)
- Papyrus (2)
- Particles (2)
- Particulate emission (2)
- Partikel (2)
- Passive sampling (2)
- Pathogen (2)
- Persian manuscripts (2)
- Phopshorus recovery (2)
- Pollutants (2)
- Polymere (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Red Mud (2)
- Reference material (2)
- Reproduzierbarkeit (2)
- Rotschlamm (2)
- Sanierung (2)
- Sc-ICP-ToF-MS (2)
- Scandium (2)
- Secondary Recources (2)
- Sewage sludge ordinance (2)
- Single cell analysis (2)
- Size (2)
- Solar panel (2)
- Spannungsrissbeständigkeit (2)
- Standardisation (2)
- Stress (2)
- Sustainability (2)
- TED-GC/MS (2)
- Tantal (2)
- Tantalum (2)
- Termite phylogeny (2)
- Total reflection X-ray spectroscopy (2)
- UV radiation (2)
- Ultrafine particles (2)
- Umweltsimulation (2)
- VIS (2)
- VOC-Emissionen (2)
- Volatile organic compounds (2)
- Wasserzeichen (2)
- Waste management (2)
- Weathering (2)
- XPS (2)
- Zerstörungsfreie Prüfung (2)
- Zitronensäure (2)
- fungus (2)
- melanin (2)
- 3D Printing (1)
- 3D inspection (1)
- AMR (1)
- AOF (1)
- ASAP-MS (1)
- ATR (1)
- Abdichtungssystem (1)
- Abfallbehandlung (1)
- Abwasserbehandlung (1)
- Academia (1)
- Additive Fertigung (1)
- Additive Manufacturing (1)
- Additive Manufacturing (AM) (1)
- Additive manufacturing (1)
- Adipokinetic hormone (1)
- Adipokinetic hormone receptor (1)
- Advanced Materials (1)
- Aerosol measurements (1)
- Aerosol spectroscopy (1)
- Agarose (1)
- Ageing (1)
- Aging test (1)
- Air quality (1)
- Airborne Particles (1)
- Alite (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Alkalien (1)
- Altlasten (1)
- Ambient aerosol (1)
- Ambient aerosols (1)
- Ambient air (1)
- Ambient air pollution (1)
- Ammoniak (1)
- Ammonium (1)
- Analytical chemistry (1)
- Analytische Methode (1)
- Ancient INKS (1)
- Anobium punctatum (1)
- Anoxia (1)
- Anpassung (1)
- Antibakterielle Oberflächen (1)
- Antibiotic (1)
- Antimicrobial Resistance (1)
- Antimicrobials (1)
- Antimon (1)
- Apanteles carpatus (1)
- Arabic recipes (1)
- Archéométrie (1)
- Ascomycetes (1)
- Auslaugverfahren (1)
- Auswaschung (1)
- Auswaschversuche (1)
- Authentifizierung (1)
- Autoclave tests (1)
- BEMMA Bewertung (1)
- BMU (1)
- BODIPY dye (1)
- Bacteria repellent surfaces (1)
- Bacterial adhesion (1)
- Bacterial adhesion tests (1)
- Bacterial attachment (1)
- Bacterial infection (1)
- Bagasse (1)
- Baryscapus tineivorus (1)
- Bassanite (1)
- Bauhaus (1)
- Bauproduktenverordnung (1)
- Bee (1)
- Bees (1)
- Begasung (1)
- Bestandserhaltung (1)
- Beständigkeit (1)
- Bewehrungen aus Kunststoff (1)
- Biodiversity (1)
- Biofilm formation (1)
- Biofilm growth (1)
- Biofilme (1)
- Bioilm (1)
- Bioinformatics (1)
- Biological Control (1)
- Biologische Bekämpfung (1)
- Biosphere (1)
- Biosphere-technosphere interaction (1)
- Biotische/abiotische Faktoren (1)
- Biozid (1)
- Black Ink (1)
- Blast furnace sludge (1)
- Blattodea (1)
- Blue Angel ecolabel (1)
- Boden (1)
- Botrytis (1)
- Botrytis cinerea (1)
- Bottom ash (1)
- Building products (1)
- CEN (1)
- CFRP (1)
- CO2 assisted impregnation (1)
- COST (1)
- COST Action (1)
- CRM (1)
- Calcium silicate (1)
- Calcium sulfate (1)
- Calibration (1)
- Carbide formation (1)
- Carbon feeding (1)
- Carbon ink (1)
- Carbon steel corrosion (1)
- Carbonbeton (1)
- Carbonfasern (1)
- Carotenoids (1)
- Cast iron (1)
- Characterization (1)
- Chemical characterization (1)
- Chemical composition (1)
- Chinese Paper (1)
- Chromium (1)
- Clinker substitute (1)
- Coastal protection (1)
- Cockroach (1)
- Codicology (1)
- Conditioning layer (1)
- Construction Products (1)
- Construction and demolition waste (1)
- Consumer products (1)
- Contamination (1)
- Controllable gene expression (1)
- Controlled release fertilisers (1)
- Core/shell nanoparticle (1)
- Corrosion product (1)
- Corynetes caeruleus (1)
- Crispr/Cas9 (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- DIN (1)
- DIN EN 16516 (1)
- DIN EN 350 (1)
- DIN EN 717-1 (1)
- DMAS (1)
- DSLT (1)
- Dauerhaftigkeit (1)
- Dead Sea Scrolls (1)
- Deponiebau (1)
- Deponietechnik (1)
- Desiccation (1)
- Design of experiments (1)
- Dichtungskontrollsystem (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive sampling (1)
- Digitalisation (1)
- Digitalisierung (1)
- Disease (1)
- Dispay case (1)
- Display case (1)
- Drawing (1)
- Drawings (1)
- Dyes (1)
- E$volution (1)
- EN 717-1 (1)
- EOF/AOF (1)
- EU EMPIR (1)
- EU regulations (1)
- Ecology (1)
- Ectoine (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efflux (1)
- Electric arc furnace dust (1)
- Electron microscopy (1)
- Elektronisches Laborbuch (1)
- Element analysis (1)
- Element mass concetration (1)
- Elutionsverfahren (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chambers (1)
- Emission test chamber (1)
- Emission test chamber procedure (1)
- Emission testing (1)
- Emissionen (1)
- Emissions (1)
- Emissions of hazardous gases (1)
- Emissionskammer (1)
- Emissionsmessungen (1)
- Emissionsprüfkammer (1)
- Emisson testing (1)
- Enamel colors (1)
- Encre (1)
- Environmental friendly (1)
- Ergebnisunsicherheit (1)
- Ersatzbaustoffe (1)
- Europa (1)
- European research area (1)
- Exposure risk (1)
- Extraktionsversuche (1)
- Extreme environments (1)
- Extremophilic fungi (1)
- FEM model (1)
- FIB/SEM (1)
- FTIR spectroscopy (1)
- FTIR-, XRF-, VIS- espectroscopia (1)
- Farbmittel (1)
- Fassadenfarbe (1)
- Fassadenfarben (1)
- Feeding behaviour (1)
- Fibre analysis (1)
- Filament comparison (1)
- Filterstaub (1)
- Flammschutzmittel (1)
- Flow Model (1)
- Flow system (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence (1)
- Fluorometric sensing (1)
- Formaldehyde (1)
- Forschungsförderung (1)
- Forschungsstrategie (1)
- Freisetzung und Transfer von Schadstoffen (1)
- Fume (1)
- Fälschungserkennung (1)
- Gas chromatography (1)
- Gas sensing (1)
- Gas storage (1)
- Gene network (1)
- Genetic tools (1)
- Genizah du Caire (1)
- Genome editing (1)
- Geotextilien (1)
- Gesteinskorrosion (1)
- Gesteinskörnungen (1)
- Gesundheit (1)
- Gipsabfälle (1)
- Gipsrecycling (1)
- Glass scanning (1)
- Gleichwertigkeit Messverfahren (1)
- Gold (1)
- Green pesticide (1)
- Greenhouse gas balance (1)
- Ground water (1)
- Grundwasser (1)
- Größe (1)
- Gut microbiota (1)
- Gypsum fiberboards and synthetic gypsum (1)
- Gypsum recycling (1)
- Gütezeichen (1)
- H2-Abbau (1)
- HAXPES (1)
- HDPE geomembrane (1)
- HR-CS-GFMAS (1)
- HR-GF-MAS (1)
- Hausbock (1)
- Heavy metal removal (1)
- Herculaneum (1)
- Hi-Tension (1)
- Historic ink (1)
- Horizontal gene transfer HGT (1)
- Hylotrupes bajulus (1)
- IAQ (1)
- ISO (1)
- ISO/TC 229 Nanotechnologies (1)
- Illness-induced anorexia (1)
- In situ (1)
- Incineration bottom ash (1)
- Indoor Air Quality (1)
- Indoor Products (1)
- Indoor emission (1)
- Industrial applications (1)
- Industrielles Abwasser (1)
- Infrared spectroscopy (1)
- Initial attachment (1)
- Ink terminology (1)
- Innenraum (1)
- Integrated Museum Pest Management (IMPM) (1)
- Ionizing radiation (1)
- Ir DNA staining approach (1)
- Iron oxide nanoparticles (1)
- Jewish cultures (1)
- Kleidermotte (1)
- Klimaneutralität (1)
- Kontamination (1)
- Kontamination von H2 (1)
- Kraftstoffabbau (1)
- Kraftstoffbehälter (1)
- Kumulierter Energieaufwand (1)
- Kunststoffschweißen (1)
- Lake Cadagno (1)
- Landfill liner (1)
- Laser Powder Bed Fusion (L-PBF) (1)
- Laser Printer (1)
- Laser processing (1)
- Laser-Materialbearbeitung (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Leak detection (1)
- Leather (1)
- Lebensmittelindustrie (1)
- Leichtbau (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Low cost aerosol PM sensor (1)
- Luftschadstoffe (1)
- Lysimeter, Antimony (1)
- MIC Island (1)
- MSWI bottom ash (1)
- Manuscripta Americana, Techialoyan (1)
- Manuscrits (1)
- Manuskripte (1)
- Marble (1)
- Market surveillance (1)
- Mass spectroscopy (1)
- Material emissions testing (1)
- Material surface colonisation (1)
- Materials emissions testing (1)
- Materials flow (1)
- Melanins (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metallkorrosion (1)
- Metalls (1)
- Metals (1)
- Methanogenesis (1)
- Method development (1)
- Methoden (1)
- Microbial communities (1)
- Microbiological influenced corrosion MIC (1)
- Microbiologically influenced corrosion (MIC) (1)
- Microorganism (1)
- Migration (1)
- Mikrobiell (1)
- Mikrobielle Gemeinschaft (1)
- Mineral weathering (1)
- Mircobially influcenced corrosion (1)
- Model (1)
- Model organism (1)
- Modelling (1)
- Molecular (1)
- Monoverbrennung (1)
- Moyen-âge (1)
- Multigassensorik (1)
- Museumsvitrine (1)
- Museumsvitrinen (1)
- Mutagenesis (1)
- NDT (1)
- NFDI (1)
- NIR reflectography (1)
- Nachhaltigkeit (1)
- Nano characterization (1)
- Nano particle (1)
- Nano@BAM (1)
- NanoSIMS (1)
- Nanocarrier (1)
- Nanoparticle (1)
- Nanoparticles (1)
- Nanoplattform (1)
- Nanorods (1)
- Nanotechnologie (1)
- Nassaufbereitung (1)
- Netzwerk (1)
- Neuartige Materialien (1)
- Neuropeptide (1)
- Neutralammoniumcitrat (1)
- Neutralammoniumnitrat (1)
- Nitrate (1)
- Nitrogen (1)
- Non destructive (1)
- Non-destructiv testing (1)
- Non-destructive testing (1)
- Nostoc (1)
- Novel sample preparation techniques (1)
- Nuclear waste disposal (1)
- Nutrient (1)
- Oberflächenfunktionalisierung (1)
- Office machines (1)
- On-Line Analyse (1)
- Operating Procedure (1)
- Optical properties (1)
- Optische Tomografie (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- P-Recyclate (1)
- P-Rückgewinnung (1)
- P-Senken (1)
- P-recovery (1)
- PAH (1)
- PBFSM (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- Paints (1)
- Paper (1)
- Paper tinting (1)
- Parchment (1)
- Particle (1)
- Particle Size (1)
- Particle gas emission (1)
- Particle size (1)
- Particulate emissions (1)
- Partikeldurchmesser (1)
- Partikeln (1)
- Per- und Polyfluoroierte Alkylsubstanzen (PFAS) (1)
- Perfluorierte Verbindungen (1)
- Performance comparison (1)
- Persian manuscript (1)
- Persistence (1)
- Phase separation (1)
- Phosphorbestimmung (1)
- Photoperception (1)
- Phototrophic bacteria (1)
- Pilz (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic pollution (1)
- Plume (1)
- Polymer foils (1)
- Polypropylen (1)
- Polystyrol (1)
- Preferential binding (1)
- Process control (1)
- Process monitoring (1)
- Projekte (1)
- Proteomics (1)
- Prozessmonitoring (1)
- Prüfkammer (1)
- Prürfrichtlinie (1)
- Push-out Test (1)
- Quality assurance (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- Qumranrollen (1)
- RAMAN (1)
- REACH (1)
- RFA (1)
- Radon (1)
- Raman (1)
- Recovery (1)
- Red chalk (1)
- Reduction (1)
- Reduction process (1)
- Reference data (1)
- Reference materials (1)
- Reference method (1)
- Reference procedures (1)
- Reflectography (1)
- Regelwerk (1)
- Regulations (1)
- Reifenabrieb (1)
- Release kinetics (1)
- Rembrandt (1)
- Resistance evolution (1)
- Ressourceneffizienz (1)
- Ressourcenschonung (1)
- Restoration and conservation (1)
- Ringversuch P-Gehalt in Klärschlamm (1)
- Risikobewertung (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungus (1)
- Round robin test (1)
- Röntgenspektroskopie (1)
- Rückgewinnung (1)
- SC-ICP-ToF-MS (1)
- SEM-EDS (1)
- SERS (1)
- SMPS (1)
- SOP (1)
- SRB (1)
- Scattering (1)
- Schadstoffaustrag (1)
- Schadstofftransfer (1)
- Schimmel (1)
- Schlacke (1)
- Schutzschichten (1)
- Schädling (1)
- Secondary building materials (1)
- Secondary metabolism (1)
- Secondary resources (1)
- Sediment (1)
- Sekundärgipse (1)
- Selective chlorination (1)
- Selektion (1)
- Sensor (1)
- Sequenzielle Extraktion (1)
- Sewage sludge ash (1)
- Sewage sludge incineration (1)
- Silver diffusion (1)
- Simulation (1)
- Single cell (1)
- Size distribution (1)
- Size resolved chemical composition (1)
- Smartphone (1)
- Social (1)
- Social immunity (1)
- Soil P species (1)
- Soil-like material (1)
- Soil-like materials (1)
- Solar parks (1)
- Spatter (1)
- Speziierungsanalyse (1)
- Spielzeug (1)
- Sportböden (1)
- Sportböden auf Kunststoffbasis (1)
- Stahlwerksschlacke (1)
- Stained glass (1)
- Stainless steel (1)
- Stakeholder (1)
- Stalwerksschlacke (1)
- Standardarbeitsanweisungen (1)
- Steelmaking slag (1)
- Stoffstromanalyse (1)
- Stress tolerance (1)
- Structured light scanning (1)
- Subaerial biofilm (1)
- Sum parameter analysis (1)
- Summenparameter (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Synchotron (1)
- Synchrotron (1)
- Tanning (1)
- Tauchtest (1)
- Technologietransfer (1)
- Termites (1)
- Test Guideline (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Testverfahren (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal desorption (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermal treatment (1)
- Thermische Abfallbehandlung (1)
- Thermochemisch (1)
- Thermochemische Prozesse (1)
- Thermografie (1)
- Thermographie (1)
- Thermoplastic filaments (1)
- Time resolved chemical composition (1)
- Tineola bisselliella (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah Scrolls (1)
- Trait-based ecology (1)
- Transposon (1)
- Tricalciumsilikat (1)
- UFP (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- UV-irradiation (1)
- Ultrakurzpuls-Laser (1)
- Umwelt (1)
- Unterirdische Speicher (1)
- Upscaling (1)
- Uptake rate (1)
- Utilization (1)
- VAMAS (1)
- VOC Emission (1)
- VOC transfer standards (1)
- VOC-emission (1)
- Versuchskampagne (1)
- Virulence (1)
- Vitrinen (1)
- Volatile organic compounds (VOC) (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Wasserbau (1)
- Wasserstofflagerung (1)
- Wasserstoffplasma (1)
- Waste water treatment (1)
- Wastewater (1)
- Weathering tests (1)
- Wiederholbarkeit (1)
- Wiederverwertung (1)
- Wooden toys (1)
- Workflows (1)
- Wärmedämmverbundsystem (1)
- X-Ray fluorescence (1)
- X-Ray fluorescence analyses (1)
- X-ray diffraction (1)
- X-ray spectroscopic techniques (1)
- XRF-, FTIR-, VIS-espectroscopía (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- XRF-, VIS- spectroscopy (1)
- Zeichenmaterialien (1)
- Zementersatz (1)
- Zementklinker (1)
- Zinc (1)
- Zinnschlacken (1)
- black fungus (1)
- carotenoids (1)
- genetics (1)
- historic inks (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- light (1)
- multi scale testing (1)
- pigmentation (1)
- plant pathogen (1)
- signaling (1)
- thermochemische Behandlung (1)
- virulence (1)
- Äquivalenzdurchmesser (1)
- Ökobilanz (1)
- Ökotoxizität (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (440)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (93)
- 4.1 Biologische Materialschädigung und Referenzorganismen (91)
- 4.3 Schadstofftransfer und Umwelttechnologien (81)
- 4.2 Material-Mikrobiom Wechselwirkungen (77)
- 4.5 Kunst- und Kulturgutanalyse (66)
- 4.0 Abteilungsleitung und andere (46)
- 6 Materialchemie (30)
- 1 Analytische Chemie; Referenzmaterialien (27)
- 6.1 Oberflächen- und Dünnschichtanalyse (16)
Aim. The European biocidal products regulation requires environmental risk assessments for biocidal products under service conditions. This is only possible, if processes that lead to biocide emissions into the environment are understood and can be reasonably predicted.
Actual emissions due to leaching result from different processes that are affected by material properties and environmental conditions. Transformation of biocides can affect emissions considerably.
Leaching and possible transformation of the film preservatives carbendazim, diuron, OIT and terbutryn in paints was observed under laboratory and field conditons in order to investigate the influence of different factors, e.g. water contact and radiation on biocide emissions. The paints contained either white titanium dioxide or a red iron oxide pigment to check whether pigments affect leaching processes.
Methods. Test specimens of a water-based styrene acrylic dispersion paint on glass were exposed to UVA-radiation in a UV weathering device and/or exposed to water contact by immersion events on the basis of the European standard EN 16105. Plywood panels were coated and exposed to natural weather conditions in a semi-field experiment. Concentrations of biocides and transformation products were analysed in leachates from laboratory tests, runoff samples and remaining coatings.
Results. The impact of weathering conditions on transformation processes differs for the investigated active substances. Water contact, radiation as well as pigments in the paints determine the pattern and amount of transformation products on coatings, leachates and runoff water. Observations from laboratory and field experiments were compared. It proved that results from laboratory tests support understanding of data from field experiments.
Detailed knowledge on the fate of active substances under environmental conditions supports manufacturers to develop safe applications of film preservatives and authorities to evaluate its environmental impact.
Fungi that share light-flooded habitats with phototrophs may profit from their excess photosynthetic products. But to cope with sunlight-associated stresses [e.g. high temperatures, UV radiation with associated DNA damage, accumulation of reactive oxygen species (ROS), desiccation and osmotic stresses] it is important for fungi to accurately sense and respond to changes in light. The genomes of black [dihydroxynaphthalene (DHN) melanin-containing] fungi from phyllosphere and exposed solid surfaces contain multiple photoreceptors (PRs). The plant pathogen Botrytis cinerea (Leotiomycetes) has a highly sophisticated photosensory and signalling system that helps to avoid light and to locate susceptible hosts. Rock-inhabiting Dothideomycetes and Eurotiomycetes including Knufia petricola possess equal numbers of PRs along with the same set of protective pigments. This similarity between black fungi from plant and rock surfaces suggests that photoperception and -regulation are important for fungi that receive nutrients through cooperation with phototrophs.
Sunlight is an important environmental factor is almost all ecosystems by being a source of energy, information, and stress. All organisms must protect themselves from the harmful effects of light such as UV radiation, ROS accumulation, heat, and desiccation. Finally, light qualities and quantities can be used for decision making, timing and as guide for directed growth when they are sensed and transduced into intracellular signals. Botrytis cinerea and other plant pathogens infecting the sun-exposed parts of the plant must cope with the high light conditions the host plant seeks. Further they experience an altered light spectrum (‘green gap’) when they colonize shaded parts of the plant; it is depleted for blue and red light that is absorbed by the plant chlorophyll and enriched for green and far-red light that is reflected or transmitted by the plant tissue. As these ambient light conditions trigger the shade avoidance response in the plant, the pathogens may trigger their own ‘shading response’ such as the upregulation of virulence determinants and inoculum production. B. cinerea maintains a highly sophisticated light signaling machinery that senses different light qualities to trigger a variety of responses, that are protection, morphogenesis, positive and negative tropisms, and entrainment. These characteristics render B. cinerea a valuable model to enlighten the role of light in parasitic fungus-plant interactions and beyond. The vegetative mycelium – the core of all infection and developmental programs – is not visibly pigmented and thus considered to be sensitive to biotic and abiotic stresses. However, the vegetative hyphae have a very limited half-life and are usually restricted to the invasive growth phase in which they are protected from light by the plant tissue. Fast colonization of host tissues and by this proper nutrient acquisition enables the rapid formation of long-lasting reproduction structures (melanized conidiophores with conidia, sclerotia) on the surfaces of rotted plant tissues. Depending on the light and temperature conditions, conidiation or sclerotial development is initiated. Taken together, B. cinerea uses light-regulated signaling networks to avoid light whenever possible; for example, by minimizing the half-life of sensitive cells that are hiding in plant tissues and by scheduling critical steps such as conidiogenesis, conidial germination and penetration of plant tissues for the night.
Die passive Probenahme von VOC (Volatile Organic Compounds) mit Tenax® TA und Thermodesorption GC/MS Analytik ist eine einfache, kosteneffiziente und repräsentative Methode zur Bestimmung der VOC-Konzentrationen in der Innenraumluft. In der Theorie ist die Stoffaufnahme in den Passivsammler nur abhängig vom Diffusionskoeffizienten der Substanz in Luft und der Geometrie des Sammlers (ideale Adsorption). Um sie zu charakterisieren, wird die Aufnahmerate (UR), definiert als Quotient der Massenaufnahme und dem Produkt aus Konzentration und Expositionszeit, verwendet. Viele effektive Aufnahmeraten (UR,eff) unterscheiden sich beträchtlich von idealen (theoretischen) Werten (UR,id). Literaturwerte sind in nationalen und internationalen Normen lediglich für bestimmte Expositionszeiten vorgegeben, während detaillierte Informationen über den zugehörigen Konzentrationsbereich fehlen. Außerdem ist die Anzahl der insgesamt in der Literatur beschriebenen Substanzen begrenzt. Das Ziel der vorgestellten Studie ist es diesen Fundus an Aufnahmeraten zu begutachten und zu prüfen und ihn durch die Bestimmung eigener qualitätsgesicherter Laborwerte zu ergänzen. Die bestimmten Aufnahmeraten werden als akkurat bezüglich ihrer relativen Standardabweichung und Vergleichbarkeit zu Literaturwerten betrachtet und können für Expositionszeiten von 7 Tagen bei Konzentrationen von 50 100 µg/m³ (ca. 100 300 ppm min) empfohlen werden. Die Sieben Tage Aufnahmeraten aus ISO16017 2 und ASTM D6196 sind nicht generell für diesen Zweck geeignet, wie exemplarisch für Benzol gezeigt wurde.
Die Zementindustrie und weitere energieintensive Industrien wie etwa die Stahlindustrie stehen vor dem Hintergrund der Transformation unserer Gesellschaft zur Klimaneutralität vor erheblichen Herausforderungen. Ziel dieser Branchen ist perspektivisch die vollständige Vermeidung klimaschädlicher Emissionen – mit besonderem Fokus auf Kohlendioxid. Neben der Umstellung auf regenerative Energieträger, sind im Speziellen für die Zementindustrie die erheblichen Anteile an CO2-Emissionen durch die Entsäuerung von Kalkstein zukünftig zu vermeiden. Da die hervorragenden Bindemitteleigenschaften des bisher hauptsächlich in Zementen eingesetzten Portlandklinkers jedoch auf Calciumverbindungen wie Tri- und Di-calciumsilikaten basieren, stellt die Substitution des Kalks derzeit für die Zementindustrie die größte Herausforderung dar. Neben vollständig neuen Bindemittelsystemen ohne Verwendung von Kalk und CCS/CCU-Technologien zur Vermeidung der CO2-Emissionen bei Verwendung von Kalk, können Abfälle und Nebenprodukte wie etwa Betonbrechsand, verschiedene Schlacken und weitere Massenreststoffe sinnvoll zur Einsparung von Rohstoffen und zur Vermeidung von CO2-Emissionen eingesetzt werden. Es gilt diese Potentiale von Sekundärrohstoffen branchenübergreifend zu identifizieren und Synergien zwischen den Branchen nutzbar zu machen. Hierbei werden neben der chemischen Zusammensetzung der Abfälle und Nebenprodukte auch die Verfügbarkeit und der Massenstrom relevante Kriterien sein. Die potenziellen Sekundärrohstoffe und deren Gemische mit chemisch ähnlicher Zusammensetzung wie die bisher verwendeten Bindemittel, können durch verschiedene technische Ansätze wieder in reaktive Bindemittel umgewandelt und damit nutzbar gemacht werden. Eine gezielte Umwandlung der nicht reaktiven mineralischen Phasen in neue mineralische Phasen mit guten Bindemitteleigenschaften, kann u. a. durch Schmelzprozesse erzielt werden. In Schmelzen können bei hohen Temperaturen die bestehenden, nicht reaktiven mineralischen Phasen zerstört und neue mineralische Phasen mit guten Bindemitteleigenschaften erzeugt werden. Hohe Freiheitsgrade durch gezielte Einstellung der stofflichen Zusammensetzung der Schmelze, durch Stoffseparationen und durch geregelte Abkühlregimes können eine maßgeschneiderte Erzeugung neuer Bindemitteltypen ermöglichen. Aufgrund der hohen erforderlichen Temperaturen von Schmelzprozessen ist die Umsetzung dieser neuen Verfahren nach Möglichkeit in bestehenden pyrometallurgischen Produktionsrouten wie etwa der Stahlproduktion vorzunehmen. So kann etwa der Einsatz von Betonbrechsand als Schlackebildner in der Stahlproduktion zielführend sein, wenn die Schlacke wieder zu einem Bindemittel prozessiert wird und in Zementen Verwendung findet. Eine stoffliche Kreislaufführung wäre hiermit gegeben, wobei der Einsatz von Kalkstein als Schlackebildner oder Rohstoff für die Zementproduktion, und damit die entsprechenden CO2-Emissionen, vermieden werden. Die Entwicklung neuartiger Bindemittelsysteme auf Basis von Sekundärrohstoffen sollte von erforderlichen Anpassungen und neuen Entwicklungen in der Regelsetzung und Normung begleitet werden. Vor allem muss gewährleistet sein, dass die mit neuen Bindemitteln hergestellten Betone den hohen Anforderungen an Dauerhaftigkeit und Umweltverträglichkeit genügen. Des Weiteren sollte mit den etablierten Methoden, wie etwa der Lebenszyklusanalyse, untersucht werden, inwiefern und in welchem Umfang die neuen technischen Entwicklungen zu Nachhaltigkeit und Klimaschutz beitragen.
Microbiologically Influenced Corrosion of Cast Iron Containers for High-Level Nuclear Waste Disposal
(2022)
Ductile and corrosion resistant cast iron is investigated as a potential container material to store high-level nuclear waste (HLW) in deep geological repositories (DGR) in claystone bedrock. The dynamic corrosion process is dependent on the conditions present in the DGR which are influenced and/or controlled by geochemical parameters (e.g., redox potential, pH, presence of and ionic concentration in (pore-)water), physical parameters (e.g., pressure), and the influence of metabolically active microorganisms. Cast iron corrosion will occur at the intersection of container and its decontaminable coating with the bentonite backfill material which contains natural microbial populations.
The conditions in a DGR are simulated in microcosm experiments to investigate the impact of microbiologically influenced corrosion (MIC); the microcosms contain: B27 bentonite, synthetic pore water, N2 or N2-CO2 atmosphere, cast iron coupons, as well as the bacterium Desulfosporosinus burensis (isolated from repository depth in Buré, France). Three coupon configurations will be used: untreated, coated with decontaminable coating, and coated with decontaminable coating which has been damaged to simulate possible damages. The microcosms will be examined for bio- and geochemical parameters, such as pH, redox potential, mineral phases, sulphate concentration, Fe(II):Fe(III), changes in microbial populations, and the corrosion process for formation of corrosion products, and potential microbial influence, after a 270-day incubation period at 25°C under anaerobic conditions. In subsequent experiments, the sorption behavior of lanthanides and actinides onto the membranes of viable cells and spores of D. burensis, as well as the surface of corroded cast iron coupons will be investigated.
Analyseverfahren und Messhäufigkeit zur Bestimmung des Phosphorgehalts im Klärschlamm nach AbfKlärV
(2022)
Auf dem Betreiberforum der DWA-Plattform P-Rück wurden die Empfehlungen für den Vollzug der Phosphorrückgewinnungspflicht aus Klärschlamm vorgestellt. Diese Empfehlungen behandeln die Häufigkeit der Phosphoruntersuchungen im Klärschlamm, wo ein Jahresgang empfohlen wird und eine Empfehlung der Phosphorbestimmung über Aufschluss der Probe in der Mikrowelle und Messung mit ICP-OES. Untermauert wurden die Empfehlungen mit den Ergebnissen von Klärschlamm-Monitoring, Ringversuch und Analytikvergleich aus dem Vorhaben extraWERT.
For the European sewage sludge ash monitoring ash samples from sewage sludge incineration plants were requested from all over Europe. First results of the received samples regarding main and trace element contents were presented at ESPC4. Moreover, a list of all known European facilities for sewage sludge monoincineration was presented.
Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind.
Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet.
Using nanofiber-like cell appendages, secreted proteins and sugars, bacteria can establish initial surface contact followed by irreversible adhesion and the formation of multicellular biofilms. Here, the stabilizing extracellular biofilm matrix together with physiological changes on the single cell level leads to an increased resilience towards harsh environmental conditions, antimicrobials, the host immune response and established cleaning procedures. Persistent microbial adhesion on e.g., medical implants, in water supply networks or food-processing industry is often associated with chronic inflammation, nosocomial and foodborne infections, enhanced biofouling and product contamination. To prevent persistent microbial colonization, antibacterial surface strategies often target the initial steps of biofilm formation and impede adhesion of single cells before a mature biofilm is being formed. While chemical coatings have been widely used, their restricted biocompatibility for eukaryotic cells and attenuated antibacterial-effects due to compound release limit their areas of application and alternative strategies focus on modified surfaces topographies to impede bacterial adhesion. In this work, we used ns-UV laser treatment (wavelength 248 nm and a pulse duration of 20 ns) to generate laser-induced periodic surface structures (LIPSS) with different submicrometric periods ranging from ~210 to ~610 nm on commercial poly(ethylene terephthalate) (PET) foils. Following structurally and chemically analyses, PET samples were subjected to bacterial colonization studies with Escherichia coli TG1, a bacterial test strain with a strong biofilm formation capacity due to the formation of nanofiber-like cell-appendages (pili). Bacterial adhesion tests revealed that E. coli repellence decisively depends on the spatial periods of the LIPSS with the strongest reduction (~91%) in cell adhesion observed for LIPSS periods of 214 nm. Scanning electron microscopy and additional biofilm studies using a pili-deficient E. coli TG1 strain revealed the importance of extracellular appendages in the bacterial repellence observed here, thus, pointing out new antibiotics-free strategies for antibacterial surfaces by impeding nanofiber-mediated bacterial adhesion.
The processing of laser-induced periodic surface structures (LIPSS) represents a simple and robust way for the nanostructuring of solids that allows creating a wide range of surface functionalities featuring applications in optics, tribology, medicine, energy technologies, etc. While the currently available laser and scanner technology already allows surface processing rates at the m2/min level, industrial applications of LIPSS are sometimes hampered by the complex interplay between the nanoscale surface topography and the specific surface chemistry. This typically manifests in difficulties to control the processing of LIPSS and in limitations to ensure the long-term stability of the created surface functions. This presentation aims to identify some unsolved scientific problems related to LIPSS, discusses the pending technological limitations, and sketches the current state of theoretical modelling. Hereby, it is intended to stimulate further research and developments in the field of LIPSS for overcoming these limitations and for supporting the transfer of the LIPSS technology into industry.
Per- and polyfluoroalkyl substances (PFAS) have emerged over the course of the last twenty years as a global pollution issue. Altogether, there are currently more than 4700 known but only partly characterized fluorinated compounds identified by the Organization for Economic Cooperation and Development (OECD), as shown by a recently published classification proposal.
The ongoing production of new, yet unrestricted PFAS alternatives has become a major challenge for environmental routine analytics, since the state-of-the-art method LC-MS/MS relies on structural information and availability of isotope standards of the targeted compound. First reported by Miyake et al., fluorine sum parameters like adsorbable organic fluorine (AOF), extractable organic fluorine (EOF) and total fluorine (TF) can be applied to survey and detect the presence of large amounts of unidentified organofluorine compounds in environmental matrices. Today fluorine sum parameters have been established as a useful supplement to classic target-analytical approaches of PFAS and were implemented for the first time as a sum value “PFAS-total” in the recently revised Drinking Water Directive (2020/2184) by the European Commission.
In contrast, X-ray absorption near-edge structure (XANES) spectroscopy has been widely applied to identify low concentration of element-specific contamination without pre-treatment in environmental samples in the past. The XANES approach enables a penetration depth of approx. 1 µm (at fluorine K-edge energy; depending on the matrix) which is significantly deeper than for X-ray photoelectron spectroscopy (XPS; penetration depth approx. 10 nm). Furthermore, the method is fast, non-destructive and only simple preparation of the samples is required.
In our work, we combined both F-XANES spectroscopy and combustion ion chromatography (CIC) in order to present a new analytical perspective on the investigation of PFAS in environmental media and material samples.
In Deutschland ist ab 2029 eine Phosphorrückgewinnung aus Klärschlamm verpflichtend. Ausgenommen sind Klärschlämme mit weniger als 20 g P/kg TM. Für die Phosphorbestimmung sind verschiedene Methoden nach Klärschlammverordnung als gleichwertig zugelassen: Der Königswasseraufschluss in der Mikrowelle und am Rückfluss sowie die Messung an ICP-OES, ICP-MS und die photometrische Bestimmung mittels Ammoniummolybdaten. An der BAM wurden die unterschiedlichen Methodenkombinationen aus Aufschluss- und Messmethode an 15 Klärschlämmen überprüft und in einem Ringversuch mit einem Klärschlamm getestet. Die Ergebnisse werden in diesem Vortrag zusammengefasst. Als Folge der Untersuchungen wird für die Phosphorbestimmung in Klärschlamm die ICP-OES-Messung nach Königswasseraufschluss in der Mikrowelle empfohlen.
The exposure to antimicrobial substances drives the evolution of antimicrobial resistance. Biocides are antimicrobials used as disinfectants, antiseptics and preservatives. They find application on a large scale in the industrial and medical sector, but also in private households. In terms of mass, the worldwide use of biocides exceeds that of antibiotics. Thus, despite their important role in preventing the spread of pathogens, due to their ubiquity, biocides are suspected to be drivers of the antimicrobial resistance crisis. In our work at BAM we try to understand how biocides contribute to the emergence of AMR, what the underlying adaptation principles and mechanisms are and how they compare to those found for antibiotics. Within our group, I mainly focus on the following two questions: How does phenotypic heterogeneity in bacteria affect the ability to survive treatment with biocides? And what are the consequences of phenotypic heterogeneity for the evolution of resistance to biocides and antibiotics?
I will share published and unpublished results which demonstrate that phenotypic heterogeneity can enable the survival of biocide treatment and, through this, facilitate the evolution of AMR. On the other hand, we find that adaptation to a biocide can unexpectedly impair the ability to evolve resistance against an antibiotic.
Der Vortrag liefert eine Zusammenfassung der wichtigsten Ergebnisse des extraWERT-Vorhabens mit Schwerpunkt auf den Umsetzungsfragen zur Klärschlammverordnung. Bei diesen Punkten handelt es sich um die Untersuchung von monatlichen Phosphorschwankungen in kommunalem Klärschlamm und die Gleichwertigkeit verschiedener Verfahren zur Phosphorbestimmung in Klärschlamm.
Die Zementindustrie und weitere energieintensive Industrien wie etwa die Stahlindustrie stehen vor dem Hintergrund der Transformation unserer Gesellschaft zur Klimaneutralität vor erheblichen Herausforderungen. Ziel dieser Branchen ist perspektivisch die vollständige Vermeidung klimaschädlicher Emissionen – mit besonderem Fokus auf Kohlendioxid. Neben der Umstellung auf regenerative Energieträger, sind im Speziellen für die Zementindustrie die erheblichen Anteile an CO2-Emissionen durch die Entsäuerung von Kalkstein zukünftig zu vermeiden. Da die hervorragenden Bindemitteleigenschaften des bisher hauptsächlich in Zementen eingesetzten Portlandklinkers jedoch auf Calciumverbindungen wie Tri- und Di-calciumsilikaten basieren, stellt die Substitution des Kalks derzeit für die Zementindustrie die größte Herausforderung dar. Neben vollständig neuen Bindemittelsystemen ohne Verwendung von Kalk und CCS/CCU-Technologien zur Vermeidung der CO2-Emissionen bei Verwendung von Kalk, können Abfälle und Nebenprodukte wie etwa Betonbrechsand, verschiedene Schlacken und weitere Massenreststoffe sinnvoll zur Einsparung von Rohstoffen und zur Vermeidung von CO2-Emissionen eingesetzt werden. Es gilt diese Potentiale von Sekundärrohstoffen branchenübergreifend zu identifizieren und Synergien zwischen den Branchen nutzbar zu machen. Hierbei werden neben der chemischen Zusammensetzung der Abfälle und Nebenprodukte auch die Verfügbarkeit und der Massenstrom relevante Kriterien sein. Die potenziellen Sekundärrohstoffe und deren Gemische mit chemisch ähnlicher Zusammensetzung wie die bisher verwendeten Bindemittel, können durch verschiedene technische Ansätze wieder in reaktive Bindemittel umgewandelt und damit nutzbar gemacht werden. Eine gezielte Umwandlung der nicht reaktiven mineralischen Phasen in neue mineralische Phasen mit guten Bindemitteleigenschaften, kann u. a. durch Schmelzprozesse erzielt werden. In Schmelzen können bei hohen Temperaturen die bestehenden, nicht reaktiven mineralischen Phasen zerstört und neue mineralische Phasen mit guten Bindemitteleigenschaften erzeugt werden. Hohe Freiheitsgrade durch gezielte Einstellung der stofflichen Zusammensetzung der Schmelze, durch Stoffseparationen und durch geregelte Abkühlregimes können eine maßgeschneiderte Erzeugung neuer Bindemitteltypen ermöglichen. Aufgrund der hohen erforderlichen Temperaturen von Schmelzprozessen ist die Umsetzung dieser neuen Verfahren nach Möglichkeit in bestehenden pyrometallurgischen Produktionsrouten wie etwa der Stahlproduktion vorzunehmen. So kann etwa der Einsatz von Betonbrechsand als Schlackebildner in der Stahlproduktion zielführend sein, wenn die Schlacke wieder zu einem Bindemittel prozessiert wird und in Zementen Verwendung findet. Eine stoffliche Kreislaufführung wäre hiermit gegeben, wobei der Einsatz von Kalkstein als Schlackebildner oder Rohstoff für die Zementproduktion, und damit die entsprechenden CO2-Emissionen, vermieden werden. Die Entwicklung neuartiger Bindemittelsysteme auf Basis von Sekundärrohstoffen sollte von erforderlichen Anpassungen und neuen Entwicklungen in der Regelsetzung und Normung begleitet werden. Vor allem muss gewährleistet sein, dass die mit neuen Bindemitteln hergestellten Betone den hohen Anforderungen an Dauerhaftigkeit und Umweltverträglichkeit genügen. Des Weiteren sollte mit den etablierten Methoden, wie etwa der Lebenszyklusanalyse, untersucht werden, inwiefern und in welchem Umfang die neuen technischen Entwicklungen zu Nachhaltigkeit und Klimaschutz beitragen.
Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind.
Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet.
Im Rahmen des Projekts wurde 1.) eine vollständige Bewertung des Stands der Technik in der EU bei der Behandlung von Rostasche vorgenommen und 2.) eine Optimierung der Nutzung der Feinfraktion in Labor- und Feldmaßstab untersucht.
Das Konsortium bestand aus zwei Universitäten aus Deutschland und Italien, der BAM als Forschungseinrichtung des Bundes und zwei Industriepartnern aus Deutschland und Schweden mit unterschiedlichen und spezifischen Fachkompetenzen.
Im Vortrag werden die Ergebnisse des weitgehend abgeschlossenen Projekts BASH-TREAT vorgestellt.
Black fungi also called black yeasts, rock-inhabiting fungi or microcolonial fungi are a group of Ascomycetes [Eurotiomycetes, Arthoniomycetes and Dothideomycetes] that exhibit high stress tolerance, yeast‑like or meristematic growth, and constitutive 1,8-dihydroxynaphthalene (DHN) melanin formation. They dominate a range of hostile natural and man‑made environments – from desert rocks and salterns to dishwashers, roofs, and solar panels. Due to their slow growth and the lack of sexual cycles and genetic tools, the underlying mechanisms of black fungi’s phenotypic traits have remained largely unexplored. We consider the rock inhabitant K. petricola [Eurotiomycetes, Chaetothyriales] a suitable model for studying the phenotypic characteristics of black fungi. With K. petricola the regulation of pigment synthesis, general stress responses and the unusual modes of cell division can be dissected by advanced reverse and forward genetics approaches. The genome of K. petricola strain A95 was sequenced using a combination of short high quality Illumina reads and long PacBio reads. The final assembly consists of twelve contigs: five complete chromosomes and six contigs with one telomer each. Gene annotation supported by transcriptomics and proteomics data was manually curated. Recently, we developed a set of genetic tools to manipulate the genome for analyzing gene functions and studying the cell biology. This set includes CRISPR/Cas9-based genome editing and live-cell imaging using genetically encoded fluorescent proteins, as well as protocols for -omics approaches and for simulation of mineral weathering in the laboratory. Mutants defective in DHN melanogenesis, carotenogenesis or both processes are currently studied to elucidate the role of these protective pigments in tolerance of natural and man-made stresses, weathering of olivine, penetration of marble, and adhesion to surfaces. Further, the established protocols and knowledge gained from K. petricola form a starting point for making other extremotolerant black fungi accessible to genetic manipulation.
Dust deposition is an important source of phosphorus (P) to many ecosystems. However, there is little evidence of dust-derived P-containing minerals in soils. Here we studied P forms along a well-described climatic gradient on Hawaii, which is also a dust deposition gradient. Soil mineralogy and soil P forms from six sites along the climatic gradient were analyzed with bulk (X-ray diffraction and P K-edge X-ray absorption near edge structure)
and microscale (X-ray fluorescence, P K-edge X-ray absorption near edge structure, and Raman) analysis methods. In the wettest soils, apatite grains ranging from 5 to 30 μm in size were co-located at the micro-scale with quartz, a known continental dust indicator suggesting recent atmospheric deposition. In addition to colocation with quartz, further evidence of dust-derived P included backward trajectory modeling indicating that dust particles could be brought to Hawaii from the major global dust-loading areas in central Asia and northern Africa. Although it is not certain whether the individual observed apatite grains were derived from long-distance transport of dust, or from local dust sources such as volcanic ash or windblown fertilizer, these observations offer direct evidence that P-containing minerals have reached surface layers of highly-weathered grassland soils
through atmospheric deposition.
In dieser Präsentation wurden dem Beirat Umwelt die High-Lights und der weitere Ausblick des Foresight Process MIC vorgestellt. Im Fokus stehen hierbei insbesondere die neu angelaufenen Projekte:
COST Action Euro-MIC
MIC im Endlager
Hydrogen: MIC & Wasserstoffversprödung
Biorezeptivität von Betonoberflächen
Mitigation schwarze Pilze
WIPANO ResTest
Phenotypic heterogeneity in disinfection: sources and consequences for antimicrobial resistance
(2022)
A summary of projects here at BAM which investigate the influence of phenotypic heterogeneity on the outcome of disinfection and the influence on antimicrobial resistance. This presentation was given in the Theory Seminar of the Quantitative and Theoretical Biology group of Prof. Oliver Ebenhöh at HHU Düsseldorf
Quantitative chemical analysis of airborne particulate matter (PM) is vital for the understanding of health effects in indoor and outdoor environments, as well as for enforcing air quality regulations. Typically, airborne particles are sampled over long time periods on filters, followed by lab-based analysis, e.g., with inductively coupled plasma mass spectrometry (ICP-MS). Within the EURAMET EMPIR AEROMET project, cascade impactor aerosol sampling was combined for the first time with on-site total reflection X-ray fluorescence (TXRF) spectroscopy to develop a tool for quantifying particle element compositions within short time intervals and even on-site. This makes variations of aerosol chemistry observable with time resolution of only a few hours and with good size resolution in the PM10 range. A proof of principles of this methodological approach and the comparison to standard methods within the scope of a field campaign will be presented. Secondly, aerosol sampling and TXRF analysis seems suitable for the quantification of elements in indoor aerosols as well and may provide an important enhancement of existing methods for the analysis of organic species in aerosols (such as sampling and TD-GC/MS). As an example, the TXRF analysis of particles emitted from laser printers under controlled conditions in an environmental test chamber will be presented.
Axial passive sampling of VOCs with Tenax® TA and thermal desorption GC-MS analysis is an accepted alternative to active sampling in occupational hygiene. In theory, the uptake into the passive sampler is only dependent on the diffusion coefficient of the analyte in air and the geometry of the sampler (ideal adsorption). For characterization, the uptake rate (UR) is used defined as the ratio of the mass adsorbed and the product of ambient concentration and exposure time. Various reported effective uptake rates (UR,eff) differ to an increasing degree from ideal values (UR,id) with increasing exposure doses (denominator of the given definition of UR), (Tolnai, 2001). In national and international standards, uptake rates are essentially sorted by the applicable exposure time, while detailed information about the corresponding concentration range is lacking. Moreover, especially for long exposure periods as applied in indoor air monitoring, the number of itemized substances is limited. Therefore it is the aim of this contribution to review and expand uptake rate data by comparison of literature and own laboratory values of assured quality. Passive samplers were exposed to nine single compound atmospheres of known concentrations for seven days. Concentrations were checked twice a day via active sampling.The determined uptake rates are considered accurate in terms of RSD and comparability to literature values and can be recommended for exposure times of seven days at 50 – 100 μg m-3 (approximately 100 – 300 ppm min). Seven-day uptake rates in ISO16017-2 and ASTM D6196 are not generally suited for this purpose, as has been exemplarily shown for benzene. Thus, it is crucial for optimization of the method to produce more reliable uptake rate data, including specific information about applicable exposure times and concentrations, which will be promoted in the course of this ongoing study.
Thermochemische Behandlung von Klärschlammaschen - Phosphorrückgewinnung mit dem AshDec Prozess
(2021)
Klärschlammaschen können eine hohe Phosphatkonzentration aufweisen und stellen damit einen geeigneten Sekundärrohstoff für die Produktion von Phosphatdüngemitteln dar. Bisher wird dieses Potential der Klärschlammaschen für die Phosphor-Rückgewinnung jedoch kaum genutzt, da die in den Aschen enthaltenen Phosphate für Pflanzen kaum verfügbar und die Aschen teilweise mit toxischen Schwermetallen belastet sind.
Im AshDec®-Verfahren wird die Klärschlammaschen im Drehrohrofen im Temperaturbereich 800-1000°C unter Zugabe von Alkali-Additiven (bsp. Na2CO3) thermochemisch behandelt, um ein wirksames und schadstoffarmes Phosphatdüngemittel herzustellen. Aktuell bereitet die Firma Emter GmbH den Bau der ersten großtechnischen AshDec®-Anlage mit einer Kapazität von 30.000 Jahrestonnen Klärschlammasche am Standort ihrer Klärschlammverbrennungsanlage (Altenstadt / Oberbayern) vor. Die erste Ausbaustufe dieser Anlage wird durch das BMBF-Projekt R-Rhenania im Rahmen der Förderinitiative RePhoR begleitet.
Die Bewertung der Dauerhaftigkeit von Holz und Holzprodukten ist ein zentrales Thema im Holzschutz. Es wird zwischen einer natürlichen und einer herbeigeführten Dauerhaftigkeit unterschieden. Die Norm DIN EN 350 trägt beiden Richtungen Rechnung. Die Anwendung der Norm wird in vielen Fällen aber nicht korrekt durchgeführt. Schwachstellen werden diskutiert.
Gleichwertigkeit der nach AbfKlärV zulässigen Verfahren zur Phosphorbestimmung in Klärschlamm
(2021)
In dem Meeting wurde den Notifizierern und Ausrichtern des jährlichen länderübergreifenden Ringversuchs Klärschlamm die Ergebnisse zu Untersuchungen hinsichtlich der Gleichwertigkeit verschiedener nach AbfKlärV zulässiger Verfahren zur Phosphorbestimmung in Klärschlamm vorgestellt. Die Untersuchungen an 15 Klärschlammproben ergaben die höchsten Ergebnisse für das Messverfahren ICP-OES und das Aufschlussverfahren in der Mikrowelle. Diese Ergebnisse wurden im Ringversuch bestätigt.
Die Ergebnisse des extraWERT-Vorhabens wurden Vertreter*innen des Umweltministeriums von Bund und Ländern vorgestellt und im Zusammenhang mit dem Vollzug der AbfKlärV diskutiert. Es ging um die Phosphorschwankungen in kommunalem Klärschlamm und eine Empfehlung der Untersuchungshäufigkeit, um den Phosphorgehalt rechtssicher festzustellen. Des weiteren wurde die Performance verschiedener nach Verordnung gleichwertiger Analyseverfahren für Phosphor in Klärschlamm diskutiert anhand von Ringversuchsergebnissen und Eigenuntersuchungen an 15 Klärschlammproben.
Agricultural sewage sludge utilization becomes less important in Germany. In 2017, new fertilizer and waste laws caused the agricultural sewage sludge utilization to collapse by more than a quarter. From 2029, in German wastewater treatment plants (WWTPs) phosphorus (P) must be recovered from sewage sludge ifit contains more than 2 wt % P. Agricultural utilization will be prohibited for large WWTPs > 100,000 population equivalents (pe) from 2029 and > 50,000 pe from 2032. In Germany, each federal state must annually report amounts and quality of agriculturally utilized sewage sludge which was 17 % of the total disposal in 2019. The reports of 10 States were evaluated for 2016 and 2017 representing approx. 60 % ofthe total agriculturallyused sludge volume. Whereas phosphorus recovery is mandatory this does not apply to other nutrients. However, many P recovery processes recover other nutrients, too. Considering three differentscenariosfor future German sewage sludge disposal shows that 70 - 77 % ofthe P load in sewage sludge will probably be recovered in the future. At the same time, this applies for about 0 - 16 % of nitrogen, 36 - 52 % of calcium, 31-53 % of potassium, and 40 - 52 % of magnesium. However, these recovered nut rient loads can substitute only 1 % or less ofthe commercial fertilizer demand except from phosphorus which is about 45 % ofthe demand.
The role of methanogens in microbiologically influenced corrosion (Mi-MIC) is often neglected, due to 1) low reported corrosion rates and 2) the suspected corrosion product siderite, which is electrically non-conductive. Typically, MIC corrosion studies are carried out using batch cultures, which did not represent the dynamic conditions, i.e. pipeline and provide insufficient information on the overall corrosion potential.
We established a unique approach, a multiport flow column (MFC), to simulate pipeline conditions and obtained 10-times higher corrosion rates than previously published. Our result showed that testing procedures have a large impact on the corrosive potential of methanogens. We found strong indications with a combination of ToF-SIMS, SEM-EDS and FIB-SEM analyses that siderite is not the sole corrosion product. The corrosion layers contain phosphorus, oxygen, magnesium, calcium and iron. To verify and deepen our understanding of Mi-MIC, we are currently studying the influence of other environmental parameters (e.g. pH) on Mi-MIC.
Microbiologically influenced corrosion (MIC) is a now well-known challenge and affects industry, society and infrastructure. For a long time, the impact of methanogen-induced MIC (Mi-MIC) was underestimated. This was mainly due to the rather low published corrosion rates and the presumed corrosion product siderite, which is not electrically conductive. In our laboratory, we were able to show that this trivialization or underestimation of Mi-MIC was due to the nature of the testing. The static systems used so far do not provide environmentally relevant information about the corrosion rate and the corrosion product, especially for methanogens
To further illustrate the importance of the environment on the MIC process, we established a multiport flow column (MFC), to simulate the natural environment. With this method, and in contrast to published results using the static conditions, we obtained ten times higher corrosion rates. We analyzed the corrosion products with a combination of techniques, like ToF-SIMS, SEM-EDS and FIB-SEM, and found strong evidence that siderite is not the sole corrosion product of Mi-MIC. The corrosion layers contain phosphorus, oxygen, magnesium, calcium and iron and lacked on carbon-related species. It is hypothesized that methanogens may have influenced the nucleation process of siderite, converting bicarbonate into carbon dioxide for methanogenesis. This results in increased localized corrosion and reduced siderite formation. To verify and deepen our understanding of Mi-MIC, we are currently studying the influence of additional environmental parameters (e.g. pH, salinity, flow rate etc.) on Mi-MIC and the subsequent impacts on corrosion rates and the corrosion products.
Overall, results of this study will expand the current understanding of MIC from both analytical and mechanistic points of view, thus aiding the development of different mitigation strategies for various industry sectors.
Corrosion is a very expensive and serious problem in the different industry sectors, eg. Petroleum-, On- and off-shore, infrastructure. It is estimated that 20% of all corrosion damage is caused by microorganisms or microbiologically influenced corrosion (MIC). Several microorganisms are known to cause corrosion, including sulfate-reducing bacteria, nitrate-reducing bacteria, methanogens etc. For several years, methanogens were regarded as a mild corroder (~0.065 mm/yr), largely due to a lack of detailed investigation on the corrosion mechanism under real-environment simulated conditions. Resulting in the common belief that siderite, a non-conductive compound, is the sole corrosion product (CP) of methanogen-induced MIC (Mi-MIC).
To simulate natural environmental conditions, we developed and introduced the multiport flow column system (MFC), a multi-sectional corrosion flow-cell. Using the MFC, we obtained ten times higher corrosion rates than previously reported. With a combination of several analytical techniques, such as ToF-SIMS, SEM-EDS and FIB-SEM, we found strong indication that siderite is not the sole corrosion product of Mi-MIC. The corrosion layers contained phosphorus, oxygen, magnesium, calcium and iron. The differences in the CP between static and dynamic environments demonstrated the impact of testing procedures on the corrosive potential of methanogens. To further verify and deepen our understanding of Mi-MIC, we are currently studying the influence of additional environmental parameters (e.g. pH, salinity, flow rate) on Mi-MIC.
Overall, results of this study will expand the current understanding of MIC from both analytical and mechanistic points of view, thus aiding the development of different mitigation strategies for various industry sectors.
Der Fachbereich 7.6 untersucht seit einiger Zeit an Auslagerungsständen auf dem Testgelände in Horstwalde Korrosion im maritimen Bereich. Im Moment läuft das System mit künstlichem Meerwasser und simuliert die Bewitterung von Metallproben unter angenäherten klimatischen Bedingungen ähnlich zum natürlichem Habitat. Im Laufe der Zeit konnte nicht intendierter mikrobieller bewuchs beobachtet werden. Es stellte sich die Frage, welche Mikroorganismen vorlagen und ob diese einen Einfluss auf die Korrosionsuntersuchungen haben könnte. Aus diesem Grund wurden 16S-rRNA Untersuchungen durchgeführt welche alle drei Domänen des Lebens widerspiegeln Bakterien, Archaea und Eukaryoten. Es konnte gezeigt werden, dass über 95% der vorliegenden Biomasse Grünalgen waren, die durch Licht Eintrag in den Container Photosynthese betrieben und dadurch an Biomasse zunahmen. Des weiteren konnten Bakterien detektiert werden, welche in der Regel halophilen und aeroben Habitaten zu finden sind. Allerdings wurden auch Sulfat reduzierende Bakterien (MIC) detektiert, wenn auch in einem geringen prozentualen Anteil. Es muss allerdings Berücksichtigt werden, dass die mikrobielle Zusammensetzung sich im Laufe der Zeit weiter ändern kann. Als Ursprung der Biomasse wird, das künstliche Sediment vermutet. Außerdem wäre es für zukünftige Experiment denkbar, das System mit echtem Sediment aus dem marinen Habitat anzuimpfen.
2021 marks the 10th anniversary of the first ERA.Net RUS joint call for European-Russian STI cooperation projects. Pooling the resources of more than 20 European and Russian funding agencies, more than 150 projects were funded with an estimated budget of about € 60 million.
Being even larger than many thematic ERA.NETs, the ERA.Net RUS Plus has been the biggest and most successful regional ERA.NET so far. Indicating a strong demand for scientific cooperation, the smaller-scale projects funded within the ERA.Net RUS (Plus) calls perfectly complement Russian participation in the EU Framework Programmes.
Not least of all, the ERA-Net RUS calls are examples of successful collaboration at a time when cooperation in other fields is complicated by the politically challenging situation. These calls contributed to keeping the communication channels open.
Against this background a dedicated event in late 2021 highlighted what has been achieved within the first decade of the initiative. The project EI-GEO coordinated by BAM was selected as best practice project. The presentation displays the main results of the project and discusses the key success factors.
Tour de table - BAM
(2021)
OECD Prüfrichtlinie zur Bestimmung der Partikelgröße und Anzahlgrößenverteilung von Nanomaterialien
(2021)
Abschlusspräsentation des Projektes "OECD Prüfrichtlinie zur Bestimmung der Partikelgröße und Anzahlgrößenverteilung von Nanomaterialien" - Projektteil Nanopartikel.
Es hat sich gezeigt, dass alle Methoden zur Bestimmung der Partikelgrößenverteilung Vor- und Nachteile haben. Es wird dringend empfohlen Größenverteilungen immer mit mindestens zwei unterschiedlichen Methoden zu bestimmen: Bildgebend und mit gute Anzahlstatistik.
Verschiedene Durchmesser wurden in der TG-PSD mit einem Indexsystem versehen, welches zukünftig Verwechslungen zwischen unterschiedlichen Durchmessern vermeiden soll.
Wird ein bestimmter Durchmesser benötigt (z.B. hydrodynamisch, aerodynamisch), muss die Methode passend gewählt werden. Eine Umrechnung von einem Durchmesser in einen anderen ist in der Regel fehlerbehaftet.
Es wurde ein einheitliches Reporting-System in der TG-PSD eingeführt.
Vorstellung der Ergebnisse bei der Entwicklung einer neuen OECD Prüfrichtlinie zur Bestimmung der Partikelgröße und Anzahlgrößenverteilung von Nanomaterialien. (Projektteil Fasern.)
Ergebnisse:
Abweichungen zwischen SEM and TEM insbesondere bei langen Fasern
Die Anwendung von TEM auf kurze Fasern < 5 µm beschränkt
Für SEM wurde keine signifikante Abhängigkeit der Bestimmung der Faserdurchmesser von der Pixelgröße der Aufnahmen festgestellt
Für TEM wurde eine Abhängigkeit der Bestimmung der Faserdurchmesser von der Pixelgröße festgestellt
Der Einfluss der Bildauswertenden auf die Varianz der Ergebnisse ist klein im Vergleich zu der gesamten Varianz.
Nanofasern können mit TEM und SEM bestimmt werden!
Vorstellung der Ergebnisse bei der Entwicklung einer neuen OECD Prüfrichtlinie zur Bestimmung der Partikelgröße und Anzahlgrößenverteilung von Nanomaterialien.
Ergebnisse:
Ideal sphärische Partikel sind gut und verlässlich mit vielen Methoden charakterisierbar.
Reale (Nicht ideale) Materialien sind gut charakterisierbar, wenn eine gewisse Homogenität und Stabilität vorliegt.
Stark inhomogene und stark agglomerierende Partikel liefern deutlich unterschiedliche Ergebnisse für verschiedene Methoden.
Partikel mit geringen Größenunterschieden lassen sich mit allen Methoden gut charakterisieren.
Partikel mit sehr deutlichen Größenunterschieden führen häufig zu einer Unterbewertung der kleineren Partikel.
Vollautomatische Partikeldetektion bei elektronenmikroskopischen Aufnahmen ist z.Zt. noch stark fehleranfällig und kann daher nicht empfohlen werden.
Es hat sich gezeigt, dass alle Methoden zur Bestimmung der Partikelgrößenverteilung Vor- und Nachteile haben. Es ist dringend zu empfehlen Größenverteilungen immer mit mindestens zwei unterschiedlichen Methoden zu bestimmen: Bildgebend und mit gute Anzahlstatistik.
Verschiedene Durchmesser wurden in der TG-PSD mit einem Indexsystem versehen, welches zukünftig Verwechslungen zwischen unterschiedlichen Durchmessern vermeiden soll.
Wird ein bestimmter Durchmesser benötigt (z.B. hydrodynamisch, aerodynamisch), muss die Methode passend gewählt werden. Eine Umrechnung von einem Durchmesser in einen anderen ist in der Regel fehlerbehaftet.
Es wurde ein einheitliches Reporting-System in der TG-PSD eingeführt.
In 1981 the OECD published the Test Guideline on Particle size and size distribution. This TG is still a valid document for the measurement of particles all over the world.
When nanomaterials gained importance, ISO set up a technical commitee for Nanotechnologies in 2005 and the OECD followed this step in 2006 with the Working Party on Manufactured Nanomaterials.
In the following years ISO and OECD published several documents about nanomaterials and the systematisation developed.
In 2017 it was finally clear that nanomaterials need to be adressed in another way than chemicals and in 2020 ECHA revised the REACH-Annexes accordingly and included nanomaterials.
Unfortunately there is a little problem with this: Only a few applicable test guidelines exit for the measurement of the nanomaterials. Several test guidelines date from 1981 and do not address nanomaterials.
The logical next step for the OECD would be to publish a series of test guidelines which are indeed currently prepared and will be shown in this talk.
Finally there is an additional need for the future of NM standardisation: Digitalisation.
Phosphorus (P) fertilizers from secondary resources became increasingly important in the last years. However, these novel P-fertilizers can also contain toxic pollutants. Chromium in its hexavalent state (Cr(VI)) is regulated with low limit values for agricultural products due to its high toxicity, but the determination of Cr(VI) in these novel fertilizer matrices can be hampered by redox processes that lead to false results. Thus, we applied the passive sampler technique Diffusive Gradients in Thin-films (DGT) for the determination of Cr(VI) in fertilizers and compared the results with the standard wet chemical extraction method (German norm DIN EN 15192) and Cr K-edge X-ray absorption near-edge structure (XANES) spectroscopy. We determined an overall good correlation between the wet chemical extraction and the DGT method. DGT was very sensitive and in most cases selective for the analysis of Cr(VI) in P-fertilizers. However, hardly soluble Cr(VI) compounds cannot be detected with the DGT method since only mobile Cr(VI) is analyzed. Furthermore, Cr K-edge XANES spectroscopy showed that the DGT binding layer also adsorbs small amounts of mobile Cr(III) compounds which leads to overestimated Cr(VI) values. The results of certain types of P-fertilizers containing mobile Cr(III) or partly immobile Cr(VI), showed that optimization of the DGT method is required to avoid over- or underestimation of Cr(VI).
The aim of this study was to investigate the passive sampler method Diffusive Gradients in Thin-films (DGT) for ammonium and nitrate in amended soils. Therefore, we used soils from a pot experiment with maize where nitrogen (N) was supplied as ammonium sulfate nitrate (ASN), without and with a nitrification inhibitor (NI). The additional use of a NI can delay the nitrification in the soil and making the ammonium available for a longer period in the soil solution after its application. Homogenized soil samples were collected directly from each pot after one week of incubation before sowing and after harvesting the maize. Nitrate and ammonium in these soil samples were extracted using DGT devices equipped with a Putolite A520E (for nitrate) and Microlite PrCH (for ammonium) binding layer. Ammonium DGT which determined the mobile and labile ammonium forms based on diffusion and the resupplies from the solid soil phase, only showed a significantly higher amount of extractable ammonium with NI compared to that without NI for some samples. However, significantly lower values were found for nitrate of treatments with NI compared to without NI after harvest. Thus, the lower nitrate amounts for treatments with NI compared to the treatments without NI after harvest indicated the delay of the nitrification process by the NI. Furthermore, we compared also the ammonium and nitrate
DGT results to chemical extraction with KCl solutions. The results demonstrated that the trends of DGT results and chemical extraction were complimentary through all the treatments.
Gypsum is widely used in the construction sector, and its worldwide consumption has been increasing now for several decades. Currently, the gypsum demand is met up to 60% by FGD gypsum (a by-product from coal-fired power plants) in Germany. The natural gypsum deposits cover the remaining gypsum demand. Due to national climate protection goals and the related shutdown of coal-fired power plants, the FGD gypsum supply will decrease significantly in the coming years and, therefore, other gypsum sources must be found.
Depending on the lifetime of the used gypsum products in the construction sector, an increase of gypsum in construction and demolition waste is to be expected. With regard to an upcoming shortage of gypsum, several approaches are being tested to recover gypsum from construction and demolition waste. Gypsum plasterboard recycling is already implemented on an industrial scale. Furthermore, new processes to recycle different types of gypsum products from construction and demolition waste are being examined. Of particular interest are different types of gypsum boards because they are well suited for selective dismantling. Therefore, they can be recovered comparatively free of impurities which is most important for the gypsum recycling.
In the research project “GipsRec 2.0”, funded by the Federal Ministry of Education and Research, recycling methods for gypsum fiberboards are being investigated. Additionally, the suitability of different types of synthetic gypsum as substitutes for FGD gypsum is being considered. Currently, the quantities of recycled gypsum are not sufficient with regard to the reduction of FGD gypsum. An increase of gypsum recycling should be achieved to narrow the future gypsum gap that will occur in the near future.
Antimicrobial surfaces have broad use in multiple settings including touch surfaces in hospitals, implanted devices, or consumer products. Their aim is to support existing hygiene procedures, and to help combat the increasing threat of antimicrobial resistance. However, concerns have been raised over the potential selection pressure exerted by such surfaces, which might drive the evolution and spread of antimicrobial resistance. In my presentation, I will highlight the risks and knowledge gaps associated with resistance on antimicrobial surfaces by different processes including evolution by de novo mutations and horizontal gene transfer, and species sorting of inherently resistant bacteria dispersed onto antimicrobial surfaces. The latter process has the potential to select for antibiotic resistance via cross-resistance between traits that confer resistance to both the antimicrobial surface coating and antibiotics. Conditions in which antibiotics and antimicrobial coatings are present simultaneously (e.g. implants) will lead to more complex interactions that can either result in the selection for or against antibiotic resistance. We mapped these interactions between several antimicrobials and antibiotics on growth and selection of Pseudomonas aeruginosa. We find prevalent physiological (i.e. synergy and antagonism) and evolutionary (i.e. cross-resistance and collateral sensitivity) combination effects. Understanding these interactions opens the door to tailor therapeutic interventions to select against resistance. In additions, we need new methods and translational studies that investigate resistance development to antimicrobial surfaces under realistic conditions. Therefore, I will present recent developments in our lab on the development of such a method based on existing efficacy standards.
A wide range of analytical methods are used to estimate the plant-availability of soil phosphorus (P). Previous investigations showed that analytical methods based on the Diffusive Gradients in Thin films (DGT) technique provide a very good correlations to the amount of bioavailable nutrients and pollutants in environmental samples (Davison 2016, Vogel et al. 2017). However, the DGT results do not identify which P compound of the soil has the high bioavailability. But there are various spectroscopic techniques (infrared, Raman, P K-edge and L-edge XANES and P NMR spectroscopy) available to characterize P species in soils. Therefore, spectroscopic investigation of DGT binding layers after deployment allow us to determine the specific compounds. Nutrients such as phosphorus and nitrogen are often, together with other elements, present as molecules in the environment. These ions are detectable and distinguishable by infrared, P K- and L-edge X-ray absorption near-edge structure (XANES) and NMR spectroscopy, respectively. Additionally, microspectroscopic techniques make it also possible to analyze P compounds on the DGT binding layer with a lateral resolution down to 1 μm2. Therefore, species of elements and compounds of e.g. a spatial soil segment (e.g. rhizosphere) can be mapped and analyzed, providing valuable insight to understand the dynamics of nutrients in the environment.