4 Material und Umwelt
Filtern
Dokumenttyp
- Zeitschriftenartikel (299)
- Vortrag (280)
- Posterpräsentation (137)
- Beitrag zu einem Tagungsband (43)
- Buchkapitel (23)
- Dissertation (6)
- Sonstiges (6)
- Beitrag zu einem Sammelband (5)
- Forschungsbericht (4)
- Forschungsdatensatz (3)
Sprache
- Englisch (812) (entfernen)
Schlagworte
- Biocides (50)
- Antimicrobial resistance (34)
- Corrosion (25)
- Bacteria (24)
- Biofilms (24)
- Ink (24)
- Leaching (23)
- Biofilm (19)
- MIC (19)
- Archaeometry (17)
- Nano (17)
- Sewage sludge (17)
- VOC (17)
- Evolution (15)
- Phosphorus (15)
- XRF (15)
- Bottom ash (14)
- Methanogens (14)
- OECD (14)
- Phosphorus recovery (14)
- Recycling (14)
- Microbiologically influenced corrosion (13)
- PFAS (13)
- Per- and Polyfluoroalkyl substances (PFAS) (13)
- Raman spectroscopy (13)
- Fungus (12)
- Inks (12)
- Black fungi (11)
- Construction products (11)
- Disinfection (11)
- E. coli (11)
- Manuscripts (11)
- NAP-XPS (11)
- XANES spectroscopy (11)
- Antimicrobial coating (10)
- Biocide (10)
- Reverse glass painting (10)
- Soil (10)
- Archaea (9)
- Cascade impactor (9)
- DRIFTS (9)
- Genetics (9)
- Knufia petricola (9)
- Manuscript (9)
- Microbiology (9)
- Persistence (9)
- Resistance (9)
- Standardization (9)
- Termite (9)
- Wastewater (9)
- Aerosol (8)
- Circular economy (8)
- Ecotoxicity (8)
- Ectoine (8)
- Fertilizer (8)
- Fungi (8)
- Geosynthetics (8)
- Indoor air quality (8)
- Non-destructive testing (8)
- Non-invasive analysis (8)
- TXRF (8)
- Volatile organic compounds (8)
- X-ray absorption near-edge structure (XANES) spectroscopy (8)
- Combustion ion chromatography (7)
- Coptic (7)
- Horizontal gene transfer HGT (7)
- Laser-induced periodic surface structures (LIPSS) (7)
- Melanin (7)
- Nanomaterial (7)
- Papyrus (7)
- Reference material (7)
- Resistance evolution (7)
- Risk assessment (7)
- Termites (7)
- Tolerance (7)
- Weathering (7)
- Antibiotics (6)
- BOFS (6)
- Bacterial adhesion (6)
- Biocide tolerance (6)
- Cultural heritage (6)
- DHN melanin (6)
- Dead Sea Scrolls (6)
- Emission (6)
- Fertilzer (6)
- Glutaraldehyde (6)
- Horizontal gene transfer (6)
- Hydraulic reactivity (6)
- ISO 16000-6 (6)
- Pathogen (6)
- Pigment (6)
- Remediation (6)
- Scandium (6)
- Thermal desorption (6)
- Wood protection (6)
- Alginate (5)
- Antimony (5)
- Bio-weathering (5)
- Biofilm formation (5)
- Cross-resistance (5)
- Degradation (5)
- Emission test chamber (5)
- Environmental Simulation (5)
- Gas chromatography (5)
- Ground water (5)
- Heterogeneity (5)
- Immunity (5)
- Incineration bottom ash (5)
- Ink analyses (5)
- Iron-gall ink (5)
- Korrosion (5)
- Methanogen (5)
- Mutation rate (5)
- Nanomaterials (5)
- Nanoparticle (5)
- Olivine (5)
- Parchment (5)
- Pigments (5)
- Portland Cement (5)
- Prüfrichtlinie (5)
- Pyrometallurgy (5)
- Reflectography (5)
- Sc-ICP-ToF-MS (5)
- Sewage sludge ash (5)
- Single cell analysis (5)
- Spectroscopy (5)
- Standardisation (5)
- Test guideline (5)
- Ultrafine particles (5)
- XANES (5)
- XPS (5)
- Zinc (5)
- ATR (4)
- Air quality monitoring (4)
- Alite (4)
- Analytical method (4)
- Anobium punctatum (4)
- Antimicrobial surfaces (4)
- Antimicrobials (4)
- Biocorrosion (4)
- Carbon steel (4)
- Corrosion products (4)
- Diffusive gradients in thin films (DGT) (4)
- EN 16516 (4)
- Electric arc furnace dust (4)
- Emission reference materials (4)
- Environmental evaluation (4)
- Geotextiles (4)
- Guideline (4)
- Gypsum (4)
- Humboldt Codices (4)
- ICP-MS (4)
- Ink analysis (4)
- Light (4)
- Lysimeter (4)
- Method development (4)
- Microcolonial fungi (4)
- Middle Ages (4)
- NanoSIMS (4)
- Nanoparticles (4)
- Nitrogen (4)
- Particles (4)
- Passive sampling (4)
- Polyethylene (4)
- Polyglycerol (4)
- Raman Spectroscopy (4)
- Red Mud (4)
- Reference materials (4)
- Round robin test (4)
- Steelmaking slag (4)
- Tantalum (4)
- Thermal treatment (4)
- Tineola bisselliella (4)
- Transformation (4)
- UFP (4)
- VVOCs (4)
- Virus (4)
- 3D printing (3)
- Affinity chromatography (3)
- Antibodies (3)
- Antimicrobial (3)
- Architecture (3)
- BEMMA (3)
- Bauxite Residue (3)
- Biodeterioration (3)
- Bioinformatics (3)
- Black fungus (3)
- Blast furnace sludge (3)
- Cairo Genizah (3)
- Carbon Fibers (3)
- Carbon steel corrosion (3)
- Chamber test (3)
- Chemical analysis (3)
- Chemical durability (3)
- Combustion Ion Chromatography (3)
- Combustion ion chromatography (CIC) (3)
- DNA (3)
- Design of experiments (3)
- Diffusive Gradients in thin films (DGT) (3)
- Diffusive gradients in thin-films (DGT) (3)
- Drawings (3)
- ESEM (3)
- Electron microscopy (3)
- Element mass concentration (3)
- Emerging (3)
- Emission reference material (3)
- Emissions (3)
- Environmental simulation (3)
- Extracellular polymeric substances (3)
- Extractable organically bound fluorine (EOF) (3)
- Extremotolerance (3)
- FFF-3D-Printer (3)
- FIB/SEM (3)
- Flow Model (3)
- Fluorescence (3)
- Genomics (3)
- Groundwater (3)
- Gut microbiota (3)
- HP14 (3)
- Halomonas elongata (3)
- Herculaneum (3)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (3)
- Immune gene family (3)
- In-situ analysis (3)
- Interlaboratory comparison (3)
- Ir DNA staining approach (3)
- LIPSS (3)
- Laser processing (3)
- Manuscript studies (3)
- Material science (3)
- Materials emissions test (3)
- Mechanochemical treatment (3)
- Metabolism (3)
- Methanogen-induced microbiologically influenced corrosion (3)
- Microbiological influenced corrosion MIC (3)
- Microplastics (3)
- Mixed ink (3)
- Modelling (3)
- Modelling studies (3)
- Non destructive analytical techniques (3)
- Non-destructiv testing (3)
- Odour (3)
- Osmoadaptation (3)
- Particle size distribution (3)
- Perceived Intensity (3)
- Persian manuscripts (3)
- Phenotypic diversity (3)
- Phosphorus fertilizer (3)
- Quality assurance (3)
- Raman (3)
- Recovery (3)
- Recycling fertilizer (3)
- Recycling materials (3)
- Renewable Energy, Sustainability and the Environment (3)
- Rock-inhabiting fungus (3)
- SC-ICP-ToF-MS (3)
- Secondary building materials (3)
- Selective chlorination (3)
- Single cell (3)
- Size (3)
- Social (3)
- Stress tolerance (3)
- Struvite (3)
- Sulfate reducing bacteria (3)
- Symbiosis (3)
- UV radiation (3)
- VOC-emission (3)
- VVOC (3)
- Virulence (3)
- Waste management (3)
- Waste treatment (3)
- Wood Protection (3)
- X-ray diffraction (3)
- XRF analysis (3)
- 3D inspection (2)
- Additive Manufacturing (2)
- Additive Manufacturing (AM) (2)
- Adipokinetic hormone (2)
- Adipokinetic hormone receptor (2)
- Adsorbable organically bound fluorine (AOF) (2)
- Aerosol measurements (2)
- Agronomic performance (2)
- Air exchange rate (2)
- Air pollution (2)
- Air sampling (2)
- Aluminium (2)
- Ambient aerosols (2)
- Ammonium (2)
- Analytical methods (2)
- Anoxia (2)
- Antagonism (2)
- Antibiotic resisitance (2)
- Antiquity (2)
- Apanteles carpatus (2)
- Arabic Recipes (2)
- Artificial ageing (2)
- AshDec (2)
- Astrobiology (2)
- Atomic and Molecular Physics and Optics (2)
- Bacterial adhesion tests (2)
- Bacterial attachment (2)
- Bagasse (2)
- Baryscapus tineivorus (2)
- Bassanite (2)
- Bauprodukte (2)
- Bee (2)
- Biodiversity (2)
- Biofilm growth (2)
- Biofouling (2)
- Biogenic weathering (2)
- Biological pest control (2)
- Bioreceptivity (2)
- Biosynthesis (2)
- Biotechnology (2)
- Blattodea (2)
- Botrytis cinerea (2)
- Brown-rot fungi (2)
- Building and Construction (2)
- CDW processing (2)
- CFK (2)
- CO2 assisted impregnation (2)
- CRISPR/Cas9 (2)
- CSMC (2)
- Cabonfasern (2)
- Calcium alkali phosphate (2)
- Calcium silicate (2)
- Calcium sulfate (2)
- Cannibalism (2)
- Capsules (2)
- Carbide formation (2)
- Carbon feeding (2)
- Carbon ink (2)
- Chemical characterization (2)
- Chinese paper (2)
- Chromium (2)
- Circular Economy (2)
- Clinker substitute (2)
- Coastal protection (2)
- Cockroach (2)
- Colourants (2)
- Compatible solute (2)
- Comsumer good samples (2)
- Concrete (2)
- Condensed Matter Physics (2)
- Conservation (2)
- Consumer products (2)
- Contamination (2)
- Corynetes caeruleus (2)
- Crystallization (2)
- DGT (2)
- Density separation (2)
- Deponie (2)
- Desinfectant (2)
- Diffusive sampling (2)
- Disease (2)
- Disinfectants (2)
- Dry treatment (2)
- Dyes (2)
- E.coli (2)
- Electric Arc Furnace (2)
- Elektroofenstaub (2)
- Emission chamber (2)
- Emission testing (2)
- Emissionen (2)
- Energy Engineering and Power Technology (2)
- Entomopathogen (2)
- Environment (2)
- Environmental condition (2)
- European standard (2)
- Eusociality (2)
- FEM model (2)
- Flow system (2)
- Fluoride (2)
- Formaldehyde (2)
- Forsterite (2)
- Fuel Technology (2)
- Fume (2)
- Fungal biofilms (2)
- Genome sequence (2)
- Geogitter (2)
- Geokunststoffe (2)
- Geruch (2)
- Gichtgasschlamm (2)
- Glass (2)
- Glass scanning (2)
- Group defence (2)
- Gypsum recycling (2)
- HAXPES (2)
- Halomonas CRISPR Ectoine (2)
- Halophile (2)
- Hazard properties (2)
- Heavy metal removal (2)
- Hi-Tension (2)
- Hydrogen (2)
- In situ (2)
- Infrared spectroscopy (2)
- Ink composition (2)
- Inkwells (2)
- Insect biotechnology (2)
- Interdisciplinary (2)
- Interdisciplinary approach (2)
- Iron (2)
- Iron oxide nanoparticles (2)
- Isoptera (2)
- Keratin (2)
- Knufia (2)
- Korynetes caeruleus (2)
- Lapis lazuli (2)
- Laser Powder Bed Fusion (L-PBF) (2)
- Laser-induced breakdown spectroscopy (2)
- Leaching control mechanisms (2)
- Leaching of waste materials (2)
- Leaching tests (2)
- Leather (2)
- Life history data (2)
- Loading factor (2)
- Low melting (2)
- MOF (2)
- MSWI bottom ash (2)
- Magnesium (2)
- Marble (2)
- Marine littering (2)
- Material emissions (2)
- Mechanochemistry (2)
- Melting experiments (2)
- Metabolomics (2)
- Micro plastic (2)
- Micro-XRF (2)
- Microbial (2)
- Microbiologically influenced corrosion (MIC) (2)
- Microbiome (2)
- Microbiota (2)
- Microorganism (2)
- Micropatterning (2)
- Microplastic (2)
- Mikrobiell beeinflusste Korrosion (2)
- Model (2)
- Museum (2)
- Museum Pests (2)
- Nano particle (2)
- Nanopartikel (2)
- Neuropeptide (2)
- Nitrification inhibitor (2)
- Non invasive analysis (2)
- Nosema ceranae (2)
- Nutrient (2)
- Optics (2)
- Osmia bicornis (2)
- PGAA (2)
- PIXE (2)
- Particle gas emission (2)
- Particle size (2)
- Particle size distributuion (2)
- Particulate emission (2)
- Per- and polyfluorinated alkyl substances (PFASs) (2)
- Per- and polyfluoroalkyl substances (PFAS) (2)
- Perceived intensity (2)
- Permeable reactive barriers (2)
- Persister cells (2)
- Phopshorus recovery (2)
- Pigment analyses (2)
- Pigment identification (2)
- Plant pathogen (2)
- Plume (2)
- Pollutant (2)
- Pollutants (2)
- Provenance studies (2)
- Pseudomonas aeruginosa (2)
- Purification (2)
- Reactive oxygen species (2)
- Recycling fertiliser (2)
- Recycling fertilisers (2)
- Reduction process (2)
- Reductive amination (2)
- Reference method (2)
- Rembrandt (2)
- Ressourcenrückgewinnung (2)
- Restoration and conservation (2)
- Risk assesment (2)
- Robustness studies (2)
- Sapphire (2)
- Scattering (2)
- Sewage sludge ordinance (2)
- Shale (2)
- Size distribution (2)
- Size resolved chemical composition (2)
- Social immunity (2)
- Soil P species (2)
- Soil-like material (2)
- Solar panel (2)
- Solubility (2)
- Sorption (2)
- Spatter (2)
- Stained glass (2)
- Steelmaking (2)
- Stress (2)
- Structured light scanning (2)
- Subaerial biofilm (2)
- Subaerial biofilms (2)
- Substance release (2)
- Sustainability (2)
- Synchrotron (2)
- Synthetic organic pigments (2)
- Termite phylogeny (2)
- Test Guideline (2)
- Testguideline (2)
- Thermal extraction (2)
- Thermochemical treatment (2)
- Time resolved chemical composition (2)
- Total reflection X-ray spectroscopy (2)
- Transcriptomics (2)
- Tricalcium-silicate (2)
- UV-irradiation (2)
- Vanadium (2)
- Virology (2)
- Waste-to-energy (2)
- Wild bees (2)
- Wooden toys (2)
- Writing inks (2)
- X-Ray fluorescence analyses (2)
- X-ray adsorption near-edge structure (XANES) spectroscopy (2)
- Zink (2)
- genetics (2)
- melanin (2)
- (Semi)arid to humid-temperate natural ecosys (1)
- 13CO2 pulse labeling (1)
- 13th century (1)
- 16S rRNA gene (1)
- 2D nanomaterials (1)
- 3D Printing (1)
- 3D printer (1)
- A Greek palimpsest (1)
- A key interface (1)
- A-DNA conformation (1)
- AEROMET II (1)
- AEROMET project (1)
- AMR (1)
- ASAP-MS (1)
- ATR-FTIR (1)
- Academia (1)
- Accelerated aging (1)
- Accuracy (1)
- Acidobacteria (1)
- Adaptation (1)
- Adaption (1)
- Additive manufacturing (1)
- Advanced groups of termites (1)
- Aerodynamic levitation (1)
- Aerosol element alanysis (1)
- Aerosol element mass concentration (1)
- Aerosol gravimetry (1)
- Aerosol measurement instruments (1)
- Aerosol spectroscopy (1)
- Aerosols (1)
- Aerosolsensor (1)
- Affinity extraction (1)
- Affinity support (1)
- Ag-LDI-MS (1)
- AgBB Bewertung (1)
- Agarose (1)
- Ageing (1)
- Aging (1)
- Aging test (1)
- Aging tests (1)
- Agricultural mycology (1)
- Air analysis (1)
- Air pollution control (1)
- Air quality (1)
- Airborne Particles (1)
- Alexander von Humboldt (1)
- Alite hydraulic reactivity (1)
- Alkali zinc borate glass (1)
- Alkylating agents (1)
- Aluminum (1)
- Aluminum oxide (1)
- Ambient aerosol (1)
- Ambient air (1)
- Ambient air pollution (1)
- Amino acid analysis (1)
- Amphiphilic polymer (1)
- Amplicon sequencing (1)
- Anaerobic pathways (1)
- Analytical Chemistry (1)
- Analytical chemistry (1)
- Analytical screening techniques (1)
- Analytical standards (1)
- Ancient INKS (1)
- Ancient document production (1)
- Animal immune system (1)
- Anodization (1)
- Anti-microbial effects (1)
- Antiadhesive surfaces (1)
- Antibacterial (1)
- Antibacterial coatings (1)
- Antibacterial polymer (1)
- Antibacterial surfaces (1)
- Antibiotic (1)
- Antibiotic resistance (1)
- Antibody purification (1)
- Antifouling (1)
- Antimicrobial Resistance (1)
- Antimicrobial materials (1)
- Antimicrobial resistances (1)
- Antimicrobial test (1)
- Antimicrobial testing (1)
- Antimony black (stibnite) (1)
- Antiseptic agents (1)
- Aquatic fungi (1)
- Aqueous synthesis (1)
- Arabic recipes (1)
- Arbuscular mycorrhiza (1)
- Archaeological provenance (1)
- Archaeometric studies (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Artificial weathering (1)
- Ascomycetes (1)
- Ascosphaera apis (1)
- Ashdec (1)
- Aspergillus (1)
- Aspergillus flavus (1)
- Assessment (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Automated analysis (1)
- BESSY (1)
- BFR (1)
- BODIPY (1)
- BODIPY dye (1)
- BSA (1)
- BTEX (1)
- Bacillus subtilis (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Bacterial cell cycle (1)
- Bacterial growth (1)
- Bacterial infection (1)
- Bacterial second messenger (1)
- Baltic Sea (1)
- Bankia sp (1)
- Basidiomycetes (1)
- Basin (1)
- Batch tests (1)
- Bathyarchaeia (1)
- Bauxite residue (1)
- Bawit (1)
- Bee diseases (1)
- Bee health (1)
- Bees (1)
- Behavioural mechanisms (1)
- Beneficial microbes (1)
- Beschichtung (1)
- Beständigkeit (1)
- Bio-based insulation (1)
- Bio-receptive (1)
- Bioactive glass (1)
- Bioavailability (1)
- Bioceramics (1)
- Biocides in the environment (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biodeterioration and biodegradation (1)
- Biofilm quantification (1)
- Bioilm (1)
- Bioinformatics virology viruses software (1)
- Biokorrosion (1)
- Biological Control (1)
- Biological control (1)
- Biologically induced mineral weathering (1)
- Biomimetic (1)
- Bioseparation (1)
- Biosphere (1)
- Biosphere-technosphere interaction (1)
- Biotests (1)
- Biotic environment (1)
- Biphasic growth (1)
- Black Ink (1)
- Black microcolonial fungi (1)
- Black writing ink (1)
- Blast-furnace sludge (1)
- Blue Angel ecolabel (1)
- Bodenbelag (1)
- Book production (1)
- Botrytis (1)
- Bovine serum albumin (1)
- Building Material (1)
- Building material (1)
- Building materials (1)
- Building product (1)
- Building products (1)
- Built environment (1)
- Bushveld Complex (1)
- Byzantine manuscript (1)
- C-di-GMP (1)
- CCQM (1)
- CEC-L-103 (1)
- CFRP (1)
- CHC (1)
- CIC (1)
- COST Action (1)
- COST action CA15114 AMICI (1)
- COVID (1)
- CPC calibration (1)
- CRISPR dCas9 (1)
- CRM (1)
- CaNaPO4 (1)
- Calcareous deposits (1)
- Calcium carbonate (1)
- Calibration (1)
- Calibration transfer (1)
- Carbon Fibre (1)
- Carolingian (1)
- Carotenoids (1)
- Carrier (1)
- Cascade impector (1)
- Cast iron (1)
- Cathodic protection (1)
- Cell appendages (1)
- Cell studies (1)
- Cell-envelope (1)
- Cellulose ether (1)
- Cellulose synthase (1)
- Cerium oxide (1)
- Chamber measurement (1)
- Chamber-test (1)
- Characterisation (1)
- Characterization (1)
- Chemical composition (1)
- Chemical ecology (1)
- Chemical extraction (1)
- Chemical extraction methods (1)
- Chemical recycling (1)
- Chemicals (1)
- Chicken manure (1)
- Chicken manure ash (1)
- Chilean Coastal Cordillera (1)
- Chinese Paper (1)
- Chlorination (1)
- Chlorine (1)
- Chromitites (1)
- Clean steel (1)
- Cleridae (1)
- Climate gradient (1)
- Climate responsive materials (1)
- Cloning vectors (1)
- Close proximity to colonies (1)
- Co-combustion (1)
- Cobalt (1)
- Cockroaches (1)
- Codex (1)
- Codex Miscellaneus (1)
- Codicology (1)
- Cognitive performance (1)
- Coleoptera (1)
- Colorants (1)
- Colored glasses (1)
- Colouring (1)
- Combustion and gasification (1)
- Community composition (1)
- Community-level interactions (1)
- Comparison (1)
- Concept (1)
- Conditioning layer (1)
- Confocal microscopy (1)
- Coniophora puteana (1)
- Conjugate (1)
- Conjugation (1)
- Constantinomyces (1)
- Construction Products (1)
- Construction and demolition waste (1)
- Construction materials (1)
- Construction product (1)
- Construction products regulation (CPR) (1)
- Consumer article (1)
- Consumer articles (1)
- Contaminant transfer (1)
- Contraction (1)
- Control (1)
- Controllable gene expression (1)
- Controlled atmosphere (1)
- Controlled release fertilisers (1)
- Copper (1)
- Copper-based wood preservatives (1)
- Coptic manuscripts (1)
- Coptic papyri (1)
- Coptic studies (1)
- Coptotermes (1)
- Core microbiome (1)
- Core/shell nanoparticle (1)
- Corona (1)
- Corrosion product (1)
- Corundum (1)
- Cribellate spiders (1)
- Crispr-Cas9 (1)
- Crispr/Cas9 (1)
- Critical raw materials (1)
- Cross-feeding (1)
- Cross-sectioning (1)
- Cryo XPS (1)
- Cryptoendolithic black fungus (1)
- Cryptoendolithism (1)
- Crystalline phase identification (1)
- CuNPs (1)
- Cubical shape (1)
- Cultural Entomology (1)
- Cultural Heritage (1)
- Culuative energy demand (1)
- Cupriavidus campinensis (1)
- Cuticular hydrocarbons (1)
- Cyanobacteria (1)
- DNA barcode (1)
- DNA polymerase (1)
- DSLT (1)
- DSM 5009 (1)
- Damage repair (1)
- De novo assembly (1)
- Decomposition point (1)
- Degradable polymer (1)
- Dendrimer (1)
- Denitrification (1)
- Deponiebau (1)
- Desert ecology (1)
- Desiccation (1)
- Deterioration (1)
- Developing building materials (1)
- Development (1)
- Dielectric heating (1)
- Dietary adaptation (1)
- Differential expression (1)
- Differential gene expression analysis (1)
- Diffractive gratings (1)
- Diffusive Gradients in Thin-films (DGT) (1)
- Digitalisation (1)
- Direct laser writing (1)
- Direct material input (1)
- Disinfection Fuel (1)
- Dispay case (1)
- Dispersion of carbon pigments (1)
- Display case (1)
- Disposal (1)
- Diversity (1)
- Dothideomycetes (1)
- Downstream processing (1)
- Draft Genome (1)
- Drawing (1)
- Driving rain (1)
- Drywood termite (1)
- DsRNA (1)
- Durability (1)
- Dye (1)
- Dyes and pigments (1)
- Dynamic calibration gas mixtures (1)
- Dynamic surface leaching test (1)
- E$volution (1)
- EAF slags (1)
- EDX Analysis (1)
- EN 717-3 (1)
- EOF (1)
- EOF/AOF (1)
- EU EMPIR (1)
- EU regulations (1)
- Early european inks (1)
- Earthen building materials (1)
- Eco-efficiency analysis (1)
- Ecology (1)
- Ecotoxicity testing (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Edible insects (1)
- Effective uptake rate (1)
- Efficacy (1)
- Efflux (1)
- Egypt (1)
- Electric arc furnace (EAF) slags (1)
- Electric arc furnace slags (1)
- Electrochemical remediation (1)
- Electronic (1)
- Electronic Lab Notebook (ELN) (1)
- Element analysis (1)
- Element mass concetration (1)
- Elemental aerosol analysis (1)
- Elemental composition (1)
- Eluates (1)
- Emerging Contaminants (1)
- Emission Test Chamber (1)
- Emission Testing (1)
- Emission chamber testing (1)
- Emission chambers (1)
- Emission test chamber procedure (1)
- Emission test method (1)
- Emissions of hazardous gases (1)
- Emisson testing (1)
- Enamel colors (1)
- Enamels (1)
- Entomopathogenic Fungus (1)
- Entropy (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental conditions (1)
- Environmental friendly (1)
- Environmental impact (1)
- Environmental simulations (1)
- Epidemal layer (1)
- Erfurt (1)
- Essential oils (1)
- European research area (1)
- Eurotiomycetes (1)
- Exergy (1)
- Exocrine gland (1)
- Expansion (1)
- Experimental evolution (1)
- Exposure (1)
- Exposure risk (1)
- External (1)
- Extracellular enzymes (1)
- Extracellular pH (1)
- Extractable organic fluorine (1)
- Extraction (1)
- Extreme environments (1)
- Extremophile (1)
- Extremophiles (1)
- Extremophilic fungi (1)
- F pili (1)
- FAT class concept (1)
- FFF-3D printer (1)
- FFF-3D printing (1)
- FFF-filament (1)
- FFF-printing (1)
- FT-Raman (1)
- FTIR (1)
- FTIR spectroscopy (1)
- FactSage calculations (1)
- FactSageTM calculations (1)
- Fakes (1)
- Family archives (1)
- Faraday cup aerosol electrometer (1)
- Fatigue (1)
- Façade (1)
- Feeding behaviour (1)
- Femtosecond laser processing (1)
- Fenton-like reaction (1)
- Fiber (1)
- Fibre (1)
- Fibre analysis (1)
- Filament comparison (1)
- Fire-retardant paint (1)
- Flask method (1)
- Flexible shadow masks (1)
- Flow chamber system (1)
- Flow-System (1)
- Flow-system (1)
- Fluor XANES (1)
- Fluorescence spectroscopy (1)
- Fluorescent microscopy (1)
- Fluorescent proteins (1)
- Fluoride nanoparticles (1)
- Fluorides (1)
- Fluorolytic sol-gel synthesis (1)
- Fluorolytic sol−gel (1)
- Fluorometric sensing (1)
- Food (1)
- Food fermentation (1)
- Food safety (1)
- Force distance curve (1)
- Forest fires (1)
- Forest soils (1)
- Forgery (1)
- Formation enthalpy (1)
- Foward genetics (1)
- Fractal structure (1)
- Fractional factorial (1)
- Fragmented manuscripts (1)
- Fuel sorption (1)
- Functionalized graphene (1)
- Fungal decay (1)
- Fungal stress mechanisms and responses (1)
- Fungicidal property (1)
- Fungiculture (1)
- Fusarium (1)
- GAeF (1)
- GC-FID (1)
- GC-MS (1)
- GDL (1)
- GNBP-2 (1)
- Gas analysis (1)
- Gas chromatography - mass spectrometry (GC-MS) (1)
- Gas sensing (1)
- Gas storage (1)
- Gene expression (1)
- Gene network (1)
- General Chemistry (1)
- General Environmental Science (1)
- General Materials Science (1)
- General Medicine (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genome (1)
- Genome editing (1)
- Geobiology (1)
- Geological formation (1)
- Geology (1)
- Geomembranes (1)
- Geruchsmessung (1)
- Giulio Romano (1)
- Glass paints (1)
- Global radiation (1)
- Gold (1)
- Gothic incursions (1)
- Granulat (1)
- Graphene (1)
- Graphene–bacteria interaction (1)
- Gray mold fungus (1)
- Green facades (1)
- Green pesticide (1)
- Greenhouse gas accounting (1)
- Greenhouse gas balance (1)
- Greenhouse gas mitigation (1)
- Grouts (1)
- Growth-rate homeostasis (1)
- Gut symbionts (1)
- Gypsum fiberboards and synthetic gypsum (1)
- Gypsum plasterboards (1)
- Gypsum waste (1)
- HI-Tension (1)
- HR-CS-GFMAS (1)
- Halogenation (1)
- Halophilic (1)
- Halophilic bacteria (1)
- Hazardous waste (1)
- Haze Samples (1)
- Hazenite (1)
- Headspace GC-MS (1)
- Health, Toxicology and Mutagenesis (1)
- Healthcare (1)
- Heat capacity (1)
- Heat maps (1)
- Heavy metal free (1)
- Heavy metals (1)
- Hebrew studies (1)
- Hellenistic (1)
- Herbaspirillum seropedicae (1)
- Herculaneum papyri (1)
- Hermopolis (1)
- Herteogeneous phenotypes (1)
- Heterologous expression (1)
- High density polyethylene (1)
- High salinity (1)
- Historic buildings (1)
- Historic ink (1)
- History of Art (1)
- Holy Family (1)
- Holzschutzmittel (1)
- Honey bee (1)
- Honeybee (1)
- Hospital premises (1)
- Host and symbiont ecology (1)
- Host immunity (1)
- Household waste (1)
- Human plasma (1)
- Hydration products (1)
- Hydraulic engineering (1)
- Hydrogen permeation (1)
- Hydrogen storage (1)
- Hydrogenasen (1)
- Hydrophobic interaction (1)
- Hygienic behavior (1)
- Hylotrupes bajulus (1)
- Hylotrupes bajulus, Anobium punctatum, natural durability, tropical wood, native wood. (1)
- Hyperarid (1)
- Hyperbranched polymer (1)
- Hypermutation (1)
- Hypopharynx (1)
- IAQ (1)
- ICP-OES (1)
- IEQ (1)
- IPM in museums (1)
- IR spectroscopy (1)
- ISO 22196 (1)
- ISO REMCO (1)
- ISO/TC 229 Nanotechnologies (1)
- ISO22196 (1)
- ITS region (1)
- Idiopathic environmental intolerance (1)
- Igg (1)
- Illness-induced anorexia (1)
- Illuminated manuscripts (1)
- Immune gene prediction (1)
- ImmunoDB (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Implants (1)
- In situ synchrotron x-ray diffraction (1)
- In-situ Process Monitoring (1)
- In-vivo mutagenesis (1)
- Incubated soil/fertilizer mixtures (1)
- Indirect photolysis (1)
- Indoor Air Quality (1)
- Indoor Air: Adsorbent performance (1)
- Indoor Products (1)
- Indoor air (1)
- Indoor emission (1)
- Indoor mycobiome (1)
- Industrial and Manufacturing Engineering (1)
- Industrial applications (1)
- Industrial mycology (1)
- Infecting a number of insects, (1)
- Infections (1)
- Infrared thermography (1)
- Initial attachment (1)
- Ink corrosion (1)
- Ink fingerprint (1)
- Ink terminology (1)
- Insect evolution (1)
- Insecticide (1)
- Instrumentation (1)
- Integrated Museum Pest Management (IMPM) (1)
- Inter-comparison (1)
- Inter-lab comparison (1)
- Inter-laboratory test (1)
- Intercomparison (1)
- Interdisciplinarity (1)
- Internal pores (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Iodine (1)
- Ionic liquid (1)
- Ionizing radiation (1)
- Iron gall ink (1)
- Iron making (1)
- Iron oxide (1)
- Iron scrap (1)
- Isotopes (1)
- Issues (1)
- Jewish cultures (1)
- Jig (1)
- Joint grouts (1)
- Knock-out mutant (1)
- Kunststoffdichtungsbahnen (1)
- LC-MS/MS (1)
- LCA (1)
- LCC (1)
- LIBS (1)
- Laboratory breeding (1)
- Labrum (1)
- Laccase (1)
- Lake Cadagno (1)
- Landfill (1)
- Landfill lining (1)
- Laser Printer (1)
- Laser printer emission (1)
- Laser structuring (1)
- Laser-induced nanostructures (1)
- Laser-induced pariodic surface structures (1)
- Laser-induced periodic surface structueres (LIPPS) (1)
- Laser-modified surface (1)
- Layer-by-Layer (1)
- Lead (1)
- Lead books (1)
- Leonardo da Vinci (1)
- Lfe cycle assessment (1)
- Library pests (1)
- Lifetime (1)
- Light regulation (1)
- Light sensing (1)
- Light-induced stress (1)
- Lightning talk (1)
- Lightweighting (1)
- Lignocellulose (1)
- Limit values (1)
- Limitations (1)
- Limnoria spp (1)
- Linker (1)
- Low alloy steel (1)
- Low cost aerosol PM sensor (1)
- Low melting glasses (1)
- Low-molecular-weight organic substances (1)
- Low-tech approach (1)
- Luftgüte (1)
- Lysimeter, Antimony (1)
- MDG ICP-ToF-MS (1)
- MIC Island (1)
- MIC projekt (1)
- MSWI Bottom Ash (1)
- MSWI fly ash (1)
- Major transition (1)
- Manuscript making (1)
- Map production and publishing (1)
- Maps and colours (1)
- Marek's Disease Virus (1)
- Marek's virus (1)
- Marine borers (1)
- Market surveillance (1)
- Mask fabrication (1)
- Mass spectrometry (1)
- Mass spectroscopy (1)
- Material Analysis (1)
- Material analysis (1)
- Material degradation (1)
- Material emissions testing (1)
- Material recycling (1)
- Material surface colonisation (1)
- Materials (1)
- Materials Chemistry (1)
- Materials emissions testing (1)
- Materials flow (1)
- Mathematical analysis (1)
- Mathematical modelling (1)
- Mechanische Stabilität (1)
- Mechanisms of pathogenesis (1)
- Mechanosensitive channel (1)
- Medical mycology (1)
- Medieval glasses (1)
- Medieval-stained glass (1)
- Melanin Adhesion (1)
- Melanins (1)
- Melting point (1)
- Melting temperature (1)
- Metabolic engineering (1)
- Metabolic flux analysis (1)
- Metabolic modeling (1)
- Metadata (1)
- Metal organic frameworks (1)
- Metal recovery (1)
- Metal reducing bacteria (1)
- Metallic silver precipitates (1)
- Metalls (1)
- Metals (1)
- Metals and Alloys (1)
- Metarhizium (1)
- Metarhizium robertsii DSM 1490 (1)
- Methane (1)
- Methanogenesis (1)
- Methods of scientific analysis (1)
- Microbe (1)
- Microbial abundance (1)
- Microbial adhesions (1)
- Microbial communities (1)
- Microbial community modelling (1)
- Microbial simulation, (1)
- Microbial survival mechanisms (1)
- Microbially Induced Corrosion (1)
- Microbially induced carbonate precipitation (MICP) (1)
- Microbiologically Influrenced Corrosion (MIC) (1)
- Microchamber (1)
- Microdroplet generator (1)
- Microfluidics (1)
- Micromonospora aurantiaca (1)
- Microorganisms (1)
- Microwaves (1)
- Migration (1)
- Mikrobiell (1)
- Mikroplastik (1)
- Millipedes (1)
- Mineral (1)
- Mineral weathering (1)
- Mining (1)
- Mircobially influcenced corrosion (1)
- Mixed Inks (1)
- Mixture toxicity (1)
- Mobile anodisation (1)
- Mobile application (1)
- Model aerosols (1)
- Model organism (1)
- Modeling (1)
- Modern painting (1)
- Modified mycotoxins (1)
- Moisture (1)
- Moisture performance (1)
- Molecular (1)
- Molecular Organic Frameworks (1)
- Molecular clock (1)
- Molecular identification (1)
- Molybdenum (1)
- Monoterpene (1)
- Moriscos (1)
- MscS (1)
- Mud volcanoe fluids (1)
- Multi-resistant bacteria (1)
- Multi-scale study (1)
- Multicellularity (1)
- Multidisciplinary (1)
- Multilocus phylogeny (1)
- Multiple Displacement Amplification (1)
- Multiple chemical sensitivity (1)
- Multiple lines of evidence (1)
- Multiport (1)
- Municipal sewage sludge (1)
- Municipal solid waste (1)
- Museum insect pest (1)
- Museum pests (1)
- Mussel-inspired coating (1)
- Mussel-inspired materials (1)
- Mutagenesis (1)
- MySpot (1)
- Mycotoxin (1)
- Mycotoxins (1)
- Müllverbrennung (1)
- N and K analog tracer (1)
- NDT (1)
- NFDI (1)
- NGS (1)
- NIR imaging (1)
- NIR reflectography (1)
- Nano CRM (1)
- Nano Particles (1)
- Nano characterization (1)
- Nano metal fluorides (1)
- Nano-Fourier-transform infrared spectroscopy (1)
- Nano-materials (1)
- Nano@BAM (1)
- Nanobiocide (1)
- Nanocarrier (1)
- Nanocoating (1)
- Nanoplattform (1)
- Nanopowder (1)
- Nanorods (1)
- Nanosensor (1)
- Natural abundance of 15N (1)
- Natural durability (1)
- Natural ecosystems (1)
- Natural products discovery (1)
- Near ambient pressure XPS (1)
- Near ambient x-ray photoelectron spectroscopy (1)
- Near-infrared refectography (1)
- New exocrine organ (1)
- Next generation sequencing (1)
- Nickel (1)
- Niobium (1)
- Nitrate (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Nitrososphaerales (1)
- Nitrous oxide (1)
- Non-destructive Materials (1)
- Non-destructive test (1)
- Non-ferrous metals (1)
- Non-invasive (1)
- Non-invasive scientific methods (1)
- Non-vitriolic iron-gall inks (1)
- Nonspecific binding (NSB) (1)
- Nonvolatile (1)
- Nostoc (1)
- Nostoc punctiforme (1)
- Novel sample preparation techniques (1)
- Nuclear waste disposal (1)
- Nutrient acquisition (1)
- Nutrient cycles (1)
- Nutrient uplift and recyclin (1)
- Nährstoffe (1)
- OIT (1)
- Oddy test (1)
- Office machines (1)
- Oil (1)
- Oil and gas industry (1)
- Oil and gas reservoir (1)
- Oilfield (1)
- On-line analysis (1)
- One-step ionic liquids synthesis (1)
- Open data (1)
- Operating Procedure (1)
- Optical and Magnetic Materials (1)
- Optical properties (1)
- Ordinance on Contaminated Sites and Soil Protection (1)
- Organic contaminants (1)
- Organic phosphorus breakdown (1)
- Organo fluorine analysis (1)
- Osmophobic effect (1)
- Osmotic shock (1)
- Osteogenesis (1)
- Oxide melts (1)
- P sink method (1)
- P speciation (1)
- P-efficiency (1)
- P-recovery (1)
- P. Fluorescens (1)
- PAH (1)
- PAK (1)
- PE-HD (1)
- PFAS analysis (1)
- PFAS analytics (1)
- PM (1)
- PM monitors (1)
- PP (1)
- PS (1)
- PV modules (1)
- Painting (1)
- Paints (1)
- Palaeography (1)
- Palimpsest (1)
- Paper (1)
- Paper sizings (1)
- Paper tinting (1)
- Particle (1)
- Particle Size (1)
- Particle emission (1)
- Particle synthesis (1)
- Particulate emissions (1)
- Partikel (1)
- Partikeln (1)
- Parylene C (1)
- Pathogen spillover (1)
- Pathogen transmission (1)
- Pathogen virulence (1)
- Pentimenti (1)
- Peptide-derived components (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Perfluorierte Verbindungen (1)
- Perfluorocarboxylic acid (PFCA) (1)
- Performance (1)
- Performance comparison (1)
- Periodate oxidation (1)
- Permeability (1)
- Persian historical recipes (1)
- Persian manuscript (1)
- Pest control (1)
- Pesticides (1)
- Phase formation (1)
- Phase separation (1)
- Phase transformation (1)
- Phenotypic heterogeneity (1)
- Phenotypic variation (1)
- Phoshpor availability (1)
- Phosphate dynamics (1)
- Phosphate extractability and availability (1)
- Phosphonic acids (1)
- Phosphorous recovery (1)
- Phosphorus K-edge-XANES spectroscopy (1)
- Phosphorus availability (1)
- Phosphorus elimination (1)
- Phosphorus plant-availability (1)
- Phosphorus recycling (1)
- Phosphous recovery (1)
- Photocatalytic surfaces (1)
- Photodynamic therapy (1)
- Photometric P determination (1)
- Photonics (1)
- Photoperception (1)
- Photoreceptors (1)
- Phototrophic bacteria (1)
- Phototrophs (1)
- Phyllosphere (1)
- Physical and optical characteristics (1)
- Pilot comparison (1)
- Plant Experiment (1)
- Plant availability (1)
- Plant economic spectrum (1)
- Plant growth test (1)
- Plant-availability (1)
- Plasma (1)
- Plastic biofilm (1)
- Plastic degradation (1)
- Plastic pollution (1)
- Plastic waste (1)
- Platinum (1)
- Poficiency test (1)
- Pollution (1)
- Polydopamine (1)
- Polyelektrolyt (1)
- Polyethylene terephthalate (1)
- Polyfluorinated alcohol (PFOH) (1)
- Polyioinic liquid (1)
- Polymer (1)
- Polymer Matrix Composites (1)
- Polymer foils (1)
- Polymer-based products (1)
- Polymerase mutant (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Portrayal of St Joseph (1)
- Poster presentation (1)
- Pot experiment (1)
- Pot experiments (1)
- Potential toxic elements (1)
- Preferential binding (1)
- Preferential exclusion (1)
- Preservation (1)
- Probiotic-based vaccines (1)
- Probiotics (1)
- Process Metallurgy (1)
- Process control (1)
- Process development (1)
- Process monitoring (1)
- Process upscaling (1)
- Proficiency Test (1)
- Proficiency testing (1)
- Proofreading deficient (1)
- Prospective risk assessment (1)
- Protective glazing (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Proteome (1)
- Proteomics (1)
- Pseudomonas (1)
- Pseudomonas fluorescens (1)
- Pseudomonas veronii (1)
- Ptinidae (1)
- Public Health, Environmental and Occupational Health (1)
- Push-out Test (1)
- Pyrolysis (1)
- QA/QC (1)
- Quality assurance/quality control (1)
- Quantum dot (1)
- Quasispecies (1)
- REACH (1)
- RNA extraction (1)
- RNA interference (1)
- RNA-Seq (1)
- RNA-Sequencing (1)
- RNAi (1)
- Radio waves (1)
- Radiocarbon (1)
- Radon (1)
- Radon exhalation (1)
- Raphael school (1)
- Reactor conditions (1)
- Real-time qPCR (1)
- Recipes (1)
- Recovery potential (1)
- Recovery rate (1)
- Recycled gypsum (1)
- Recycled sources (1)
- Red chalk (1)
- Red mud (1)
- Reduction (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Reductive iron assimilation (1)
- Reference data (1)
- Reference nanoparticles (1)
- Reference organisms (1)
- Reference procedures (1)
- Reference samples (1)
- Regulation (1)
- Release kinetics (1)
- Research Data Infrastructure (1)
- Research Data Management (1)
- Resistance model (1)
- Resource Recovery (1)
- Resources (1)
- Reverse painting on glass (1)
- Reverse paintings on glass (1)
- Reworking (1)
- Rhenanite (1)
- Rhizopus (1)
- Rhizopus and Aspergillus oryzae (1)
- Rhizosphere (1)
- Rhizosphere effect (1)
- Rhizosphere processes (1)
- Rhodonia placenta (1)
- Rice (1)
- Road construction waste (1)
- Robustness validation (1)
- Rock biofilm (1)
- Rock leaching (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungi (1)
- Root economics space (1)
- Rostral gland (1)
- Rround robin test (1)
- Ruthenium (1)
- SARS (1)
- SAXS (1)
- SCALE (1)
- SDS-PAGE (1)
- SEM (1)
- SEM micrography (1)
- SEM wood characterization (1)
- SEM-EDS (1)
- SERS (1)
- SIMS (1)
- SOP (1)
- SPE extraction (1)
- SRB (1)
- SVOC (1)
- Safety (1)
- Salts (1)
- Sample preparation (1)
- Sanierung (1)
- Sc recovery (1)
- Scanning micro-X-ray fluorescence (1)
- Scattering-type scanning near-field optical microscopy (s-SNOM) (1)
- Schwermetalle (1)
- Scribal corrections (1)
- Scythica Vindobonensia, (1)
- Secondary P-fertilizer (1)
- Secondary Recources (1)
- Secondary metabolism (1)
- Secondary metabolites (1)
- Secondary raw materials (1)
- Secondary resources (1)
- Sediment (1)
- Selection (1)
- Selective Chlorination (1)
- Selective quantification (1)
- Self-assembled monolayer (1)
- Self-assembled monolayer (SAM) (1)
- Self-assembled monolayers (SAM) (1)
- Semivolatile organic compounds (1)
- Sensors (1)
- Separate collection (1)
- Sequence annotation (1)
- Sequential extraction (1)
- Sets of archaeometric data (1)
- Sewage Sludge (1)
- Sewage Sludge Ashes (1)
- Sewage extraction (1)
- Sewage sludge ash (SSA) (1)
- Sewage sludge disposal (1)
- Sewage sludge incineration (1)
- Short crack propagation (1)
- Siderophore (1)
- Signal transduction (1)
- Silica and polystyrene nanoparticles (1)
- Silicate (1)
- Silicon carbide (1)
- Silver (1)
- Silver diffusion (1)
- Simulation (1)
- Simulation of materials degradation (1)
- Single cell microbiology (1)
- Sintering (1)
- Sixteenth-century painting technique (1)
- Size exclusion chromatography (1)
- Sizing (1)
- Small angle x-ray scattering (1)
- Smartphone (1)
- Social Immunity (1)
- Social insect (1)
- Social insects (1)
- Sociality (1)
- Software (1)
- Soil contact (1)
- Soil extraction (1)
- Soil incubation study (1)
- Soil-feeding habit (1)
- Soil-like materials (1)
- Soils (1)
- Solar panels (1)
- Solar parks (1)
- Soldier (1)
- Solid phase (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solid-phase extraction (SPE) (1)
- Solitary bees (1)
- Solute excretion (1)
- Solvents (1)
- Solvolysis (1)
- Spectral imaging (1)
- Stained glass windows (1)
- Stained glasses (1)
- Stainless steel (1)
- Stakeholder (1)
- Standardized test and quantification procedure (1)
- Steelmaking residues (1)
- Stoichiometric homeostasis (1)
- Stone cultural heritage (1)
- Stop/flow experiments model (1)
- Strategy and Management (1)
- Stress conditions (1)
- Structural color (1)
- Sub-4nm particles (1)
- Subjective complaints (1)
- Subsocial (1)
- Subsoil nutrient tracing (1)
- Sugar cane bagasse (1)
- Sugarcane bagasse (1)
- Sum parameter (1)
- Sum parameter analyis (1)
- Sum parameter analysis (1)
- Superhydrophilic surface (1)
- Superhydrophobic surface (1)
- Suppression (1)
- Surface chemistry (1)
- Surface functionalization (1)
- Surface interactions (1)
- Surface water (1)
- Surface waters (1)
- Surfacewaters (1)
- Survival rates (1)
- Synchotron (1)
- Synchrotron radiation (1)
- Synchrotron-XPS (1)
- Synergy (1)
- Synthesis (1)
- Synthetic metabolism (1)
- Systematics (1)
- TED-GC/MS (1)
- TEM (1)
- TXRF ambient air aerosol chemical analysis aerosol element composition (1)
- Tanning (1)
- Tannins (1)
- Targeted and nontargeted (1)
- Targeting, Nanoparticles (1)
- Taxonomy (1)
- Temperate rain forest (1)
- Temple Scroll (1)
- Tems (1)
- Terbutryn (1)
- Teredo sp (1)
- Termite control (1)
- Termite-associated microbes (1)
- Termitoidae (1)
- Test method (1)
- Test strip (1)
- Teststreifen (1)
- Text analysis (1)
- Thermal Desorption (1)
- Thermal Extraction (1)
- Thermal analysis (1)
- Thermal degradation (1)
- Thermal imaging (1)
- Thermal properties (1)
- Thermo-desorption (1)
- Thermocouple (1)
- Thermodynamic (1)
- Thermoplastic filaments (1)
- Thioimidazolium (1)
- Tinting (1)
- ToF SIMS (1)
- ToF-SIMS (1)
- Tomography (1)
- Torah (1)
- Torah Scrolls (1)
- Torah scrolls (1)
- Touch surfaces (1)
- Trait-based ecology (1)
- Transmission electron microscopy (1)
- Transport modeling (1)
- Transposon (1)
- Tripartite interactions (1)
- Typology of Inks (1)
- Tyrosine (1)
- UV absorption (1)
- UV protection (1)
- UV tolerance (1)
- UV-VIS Reflectance spectroscopy (1)
- UV-VIS reflectance spectroscopy (1)
- Ultrashort PFAS (1)
- Ultrashort laser processing (1)
- Ultrastructure (1)
- Umweltmessung (1)
- Up-cycling (1)
- Uptake rate (1)
- Uranium (1)
- Uranium mining (1)
- Urban mining (1)
- Ureolytic bacteria (1)
- Utilisation (1)
- Utilization (1)
- VAMAS (1)
- VIS (1)
- VOC Emission (1)
- VOC Emissionen (1)
- VOC emission (1)
- VOC transfer standards (1)
- VOC-Emission (1)
- Validation trial (1)
- Vasari (1)
- Velocimetry (1)
- Vienna manuscript (1)
- Viruses (1)
- Vitriolic iron-gall inks (1)
- Volatile organic compound (1)
- Volatile organic compounds (VOC) (1)
- Vues des Cordillères (1)
- WKI flask method (1)
- Waste incineration (1)
- Waste water (1)
- Waste water treatment (1)
- Water (1)
- Water atmosphere (1)
- Water contact (1)
- Water stable isotope analysis (1)
- Water uptake (1)
- Weathering tests (1)
- Weld fatigue (1)
- Weld toe geometry (1)
- Wet-mechanical treatment (1)
- White-rot fungi (1)
- Wood Modification (1)
- Wood ash (1)
- Wood samples (1)
- Writing Ink (1)
- Writing materials (1)
- X-Ray analysis (1)
- X-Ray fluorescence (1)
- X-ray based techniques (1)
- X-ray diffraction (XRD) (1)
- X-ray fuorescence (1)
- X-ray spectroscopic techniques (1)
- X-ray spectroscopy (1)
- X-ray tomographic (1)
- X-rays (1)
- XRF Analysis (1)
- XRF imaging (1)
- XRF ink analysis (1)
- XRF-, VIS- FTIR-spectroscopy (1)
- Xestobium rufovillosum (1)
- Yeast (1)
- ZIF (1)
- ZIF-8 (1)
- Zearalenone (1)
- Zearalenone sulfate (1)
- Zeolite (1)
- Zeolithe (1)
- Zinc chloride (1)
- Zinc oxide (1)
- a-zearalenol (1)
- biocide tolerance (1)
- black fungi (1)
- black fungus (1)
- carotenoids (1)
- disinfection (1)
- dsDAN monolayer (1)
- evolution (1)
- fertilizer (1)
- fs-laser processing (1)
- fungus (1)
- genomics (1)
- heterogeneity (1)
- historic inks (1)
- iChip (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- mRNA-seq (1)
- microspectroscopy (1)
- multi scale testing (1)
- natural ventilation (1)
- openBIS (1)
- pH (1)
- pH probe (1)
- pH sensor (1)
- pHe (1)
- papyrus (1)
- pigmentation (1)
- qPCR (1)
- soil (1)
- underexplored phyla (1)
- x-ray diffraction (1)
- ‘Green’ pesticide (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (812) (entfernen)
Paper des Monats
- ja (19)
Populations of genetically identical cells can display marked variation in phenotypic traits; such variation is termed phenotypic heterogeneity. Here, we investigate the effect of substrate and electron donor limitation on phenotypic heterogeneity in N2 and CO2 fixation in the green sulphur bacterium Chlorobium phaeobacteroides. We grew populations in chemostats and batch cultures and used stable isotope labelling combined with nanometer‐scale secondary ion mass spectrometry (NanoSIMS) to quantify phenotypic heterogeneity. Experiments in H2S (i.e. electron donor) limited chemostats show that varying levels of NH4+ limitation induce heterogeneity in N2 fixation. Comparison of phenotypic heterogeneity between chemostats and batch (unlimited for H2S) populations indicates that electron donor limitation drives heterogeneity in N2 and CO2 fixation. Our results demonstrate that phenotypic heterogeneity in a certain metabolic activity can be driven by different modes of limitation and that heterogeneity can emerge in different metabolic processes upon the same mode of limitation. In conclusion, our data suggest that limitation is a general driver of phenotypic heterogeneity in microbial populations.
Sugarcane bagasse is commonly combusted to generate energy. Unfortunately, recycling strategies rarely consider the resulting ash as a potential fertilizer. To evaluate this recycling strategy for a sustainable circular economy, we characterized bagasse ash as a fertilizer and measured the effects of co-gasification and co-combustion of bagasse with either chicken manure or sewage sludge: on the phosphorus (P) mass fraction, P-extractability, and mineral P phases. Furthermore, we investigated the ashes as fertilizer for soybeans under greenhouse conditions. All methods in combination are reliable indicators helping to assess and predict P availability from ashes to soybeans. The fertilizer efficiency of pure bagasse ash increased with the ash amount supplied to the substrate. Nevertheless, it was not as effective as fertilization with triple-superphosphate and K<sub>2</sub>SO<sub>4</sub>, which we attributed to lower P availability. Co-gasification and co-combustion increased the P mass fraction in all bagasse-based ashes, but its extractability and availability to soybeans increased only when co-processed with chicken manure, because it enabled the formation of readily available Ca-alkali phosphates. Therefore, we recommend co-combusting biomass with alkali-rich residues to increase the availability of P from the ash to plants.
The suitability of common analytical methods for the determination of active substances from wood preservatives in aged wood samples was investigated during an interlaboratory study. Permethrin, propiconazole and tebuconazole were quantified in 1.5 and 8 year-old wood samples by gas chromatography and liquid chromatography. Generally, the applied Methods yielded reliable results for these samples. However, wood components can coelute with propiconazole and tebuconazole during liquid chromatography. Optimization of separation might be required if UV detection is applied.
The XPS information depth of approximately 10 nm is in the same size range as the outer membrane of the gram-negative bacteria, which makes XPS a suitable tool for determining the elemental composition of the bacterial surface and monitor changes caused by outer stress like dehydration or exposure to antimicrobials. However, bacteria are inherently in a hydrated state, and therefore only compatible to ultra-high vacuum after extensive sample preparation, which may degrade the sample constituents. This issue is addressed by the development of near-ambient pressure (NAP)-XPS, which enables bacteria and biofilms to be characterised in their native wet state. Artificial biofilms, bacteria and biofilms of Escherichia coli have been characterised with the laboratory NAP-XPS instrument EnviroESCA from SPECS GmbH, at pressures ranging from high vacuum to 12 mbar, and in both humid and dry environment. By studying biological samples in their native wet state, new insight about composition and transport of drugs through cell membranes and the extracellular polymeric substance (EPS) of biofilms can be obtained. In this contribution, the latest progress on biofilm characterisation by NAP-XPS will be presented, and measurement capabilities and limitations will be discussed.
Surface characterisation of biofilms by nearambient pressure X-ray photoelectron spectroscopy
(2018)
The XPS information depth of approximately 10 nm is in the same size range as the outer membrane of the gram-negative bacteria, which makes XPS a suitable tool for determining the elemental composition of the bacterial surface and monitor changes caused by outer stress like dehydration or exposure to antimicrobials. However, bacteria are inherently in a hydrated state, and therefore only compatible to ultra-high vacuum after extensive sample preparation, which may degrade the sample constituents. This issue is addressed by the development of near-ambient pressure (NAP)-XPS, which enables bacteria and biofilms to be characterised in their native wet state. Artificial biofilms, bacteria and biofilms of Escherichia coli have been characterised with the laboratory NAP-XPS instrument EnviroESCA from SPECS GmbH, at pressures ranging from high vacuum to 12 mbar, and in both humid and dry environment. By studying biological samples in their native wet state, new insight about composition and transport of drugs through cell membranes and the extracellular polymeric substance (EPS) of biofilms can be obtained.
A presentation held for the seminar "Ausgewählte analytische Methoden der Physik" hosted by Prof. Birgit Kanngießer at TU Berlin. The first part focus on depth-dependent XPS-measurements (XPS, synchrotron HAXPES) to obtain a concentration profile of iodine in an artificial biofilm. In the second part, NAP-XPS measurements of various bacterial samples are presented.
Surface characterisation of Escherichia coli under various conditions by near-ambient pressure XPS
(2018)
Bacteria are inherently in a hydrated state and therefore not compatible to ultra-high vacuum techniques such as XPS without prior sample preparation involving freeze drying or fast freezing.
This has changed with the development of near-ambient pressure (NAP)-XPS, which makes it possible to characterise the bacterial surface with minimal sample preparation. This paper presents NAP-XPS measurements of Escherichia coli under various NAP conditions: at 11 mbar in a humid environment, at 2 mbar after drying in the chamber, pre-dried at 4 mbar, and at 1 mbar after overnight pumping at 10^−4 mbar. The high-resolution spectra of carbon, nitrogen, and oxygen are presented and found to be in general agreement with XPS measurements from freeze-dried and fast-frozen bacteria. However, it was found that the amount of carbon components associated with polysaccharides increases relative to aliphatic carbon during drying and increases further after overnight pumping. This implies that drying has an impact on the bacterial surface.
Chemical modification of wood applying benzotriazolyl-activated carboxylic acids has proven to be a versatile method for the durable functionalization of its lignocellulosic biopolymers. Through this process, the material properties of Wood can be influenced and specifically optimized. To check the scope and limitations of this modification method, various benzamide derivatives with electron-withdrawing (EWG) or electron-donating (EDG) functional groups in different positions of the aromatic ring were synthesized and applied for covalent modification of Scots pine (Pinus sylvestris L.) sapwood in this study. The bonded amounts of substances (up to 2.20 mmol) were compared with the reactivity constants of the Hammett equation, revealing a significant correlation between the modification efficiency and the theoretical reactivity constants of the corresponding aromatic substitution pattern. The successful covalent attachment of the respective substituted benzamides was proven by attenuated total reflection infrared (ATR-IR) spectroscopy, while the stability of the newly formed ester bond was proven in a standardized leaching test.
Sustainability has become the conscientious and future-oriented principle of modern resource management and environmental protection because caring for the future is tantamount to providing manageable and healthy surroundings for ourselves. For the foreseeable future, geotechnical and environmental engineers must therefore be concerned with ensuring a healthy balance between extraction, processing, manufacturing, utilization, recycling, and disposal of materials and products.
Since it was realized that sites contaminated with metals and radionuclides needed treatment, various remediation methods have been and are being developed. Depending on the size of the contaminated site and urgency of intervention, conventional or recently introduced techniques have been used. Conventional techniques include excavation and removal for treatment of soil and contaminants, or the so-called “pump-and-treat” method, in which contaminated groundwater is removed from the ground by pumping and treated in a treatment plant on the surface. It has the advantage of using proven techniques and is easy to control, and the treated groundwater can be reinjected into the ground or discharged in rivers or lakes. Novel methods include permeable reactive barriers, biomineralization, and electrokinetic remediation.
Basic oxygen furnace slags (BOFS) are by-products of the steelmaking process. Several researchers have studied the production of Portland cement clinker and metallic iron from BOFS via a reductive treatment.
In this study, we applied a carbothermal reduction of BOFS in a technical-scale electric arc furnace and characterised the clinker-like products. Those clinker-like non-metallic products (NMPs) had a chemical and mineralogical composition comparable to clinker for ordinary Portland cement (OPC) and contained large elongated alite crystals as major component. The pure NMPs reacted more slowly and achieved a lower degree of hydration compared with commercial OPC.
If the reactivity of the products can be further increased by employing specific adaptations, it can be used as a full clinker substitute for OPC. Nevertheless, it is also an option to use the material without further modifications as a cement component or concrete addition, which contributes to the strength development in both cases.
The pressing need for novel bioproduction approaches faces a limitation in the number and type of molecules accessed through synthetic biology. Halogenation is widely used for tuning physicochemical properties of molecules and polymers, but traditional halogenation chemistry often lacks specificity and generates harmful by-products. Here, we pose that deploying synthetic metabolism tailored for biohalogenation represents an unique opportunity towards economically attractive and environmentally friendly organohalide production. On this background, we discuss growth-coupled selection of functional metabolic modules that harness the rich repertoire of biosynthetic and biodegradation capabilities of environmental bacteria for in vivo biohalogenation. By rationally combining these approaches, the chemical landscape of Living cells can accommodate bioproduction of added-value organohalides which, as of today, are obtained by traditional chemistry.
The diversity of fused filament fabrication (FFF) filaments continues to grow rapidly as the popularity of FFF-3D desktop printers for the use as home fabrication devices has been greatly increased in the past decade. Potential harmful emissions and associated health risks when operating indoors have induced many emission studies. However, the lack of standardization of measurements impeded an objectifiable comparison of research findings. Therefore, we designed a chamber-based standard method, i.e., the strand printing method (SPM), which provides a standardized printing procedure and quantifies systematically the particle emission released from individual FFF-3D filaments under controlled conditions. Forty-four marketable filament products were tested. The total number of emitted particles (TP) varied by approximately four orders of magnitude (1E9 ≤ TP ≤ 1E13), indicating that origin of polymers, manufacturer-specific additives, and undeclared impurities have a strong influence. Our results suggest that TP characterizes an individual filament product and particle emissions cannot be categorized by the polymer type (e.g., PLA or ABS) alone. The user's choice of a filament product is therefore decisive for the exposure to released particles during operation. Thus, choosing a filament product awarded for low emissions seems to be an easily achievable preemptive measure to prevent health hazards.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
Based on recently published research on leaching control mechanisms in electric arc furnace (EAF) slags, it is assumed that a FeO/SiO2 ratio of around one leads to low leached V and Cr concentrations. This ratio influences the mineral phase composition of the slag toward higher amounts of spinel and a lower solubility of calcium silicate phases by suppressing the formation of magnesiowuestite and highly soluble calcium silicate phases. To evaluate this hypothesis, laboratory and scaled up tests in an EAF pilot plant were performed on slag samples characterized by elevated V and Cr leaching and a high FeO/SiO2 ratio. Prior to the melting experiments, the optimum FeO/SiO2 ratio was calculated via FactSageTM. In the melting experiments, the ratio was adjusted by adding quartz sand, which also decreased the basicity (CaO/SiO2) of the slag. As a reference, remelting experiments without quartz sand addition were conducted and additionally, the influence of the cooling rate of the slag was examined. The remelted (without quartz sand) and the remelted modified slags (with quartz sand) were analyzed chemically and mineralogically and the leaching behavior was investigated. The modification of the slags yielded a minimized release of V and Cr, supporting the hypothesis that the FeO/SiO2 ratio influences the mineralogy and the leaching behavior.
For the first time, µ-X-ray fluorescence (µ-XRF) mapping combined with fluorine K-edge µ-X-ray absorption near-edge structure (µ-XANES) spectroscopy was applied to depict per- and polyfluoroalkyl substances (PFAS) contamination and inorganic fluoride in samples concentrations down to 100 µg/kg fluoride. To demonstrate the matrix tolerance of the method, several PFAS contaminated soil and sludge samples as well as selected consumer product samples (textiles, food contact paper and permanent baking sheet) were investigated. µ-XRF mapping allows for a unique element-specific visualisation at the sample surface and enables localisation of fluorine containing compounds to a depth of 1 µm. Manually selected fluorine rich spots were subsequently analysed via fluorine K-edge µ-XANES spectroscopy. To support spectral interpretation with respect to inorganic and organic chemical distribution and compound class determination, linear combination (LC) fitting was applied to all recorded µ-XANES spectra. Complementarily, solvent extracts of all samples were target-analysed via LC-MS/MS spectrometry. The detected PFAS sum values range from 20 to 1136 µg/kg dry weight (dw). All environmentally exposed samples revealed higher concentration of PFAS with a chain length >C8 (e.g. 580 µg/kg dw PFOS for Soil1), whereas the consumer product samples showed a more uniform distribution with regard to chain lengths from C4 to C8. Independent from quantified PFAS amounts via target analysis, µ-XRF mapping combined with µ-XANES spectroscopy was successfully applied to detect both point-specific concentration maxima and evenly distributed surface coatings of fluorinated organic contaminants in the corresponding samples.
The halophilic bacterium Halomonas elongata can tolerate salt concentrations above 10% NaCl and uses the accumulation of the compatible solute ectoine as a major osmoregulatory mechanism. Ectoine can be accumalted inside the cell through import from the medium or de novo synthesis and establishes an osmotic equilibrium with the surrounding1. Ectoine also protects proteins from the effects of freezing, drying and high temperatures4 and DNA from ionizing radiation2. These features make ectoine a valuable compound for cosmetics and medical devices.
H. elongata was originally isolated from a solar salt facility, where it thrives under high salt concentrations. It was found that marine prokaryotes, which are exposed to high oxidative stress in their environment, vary glycolytic strategies5. A variation in the use of the glucose metabolic pathways is also assumed for H. elongata.
Recent DNA-based studies have shown that the built environment is surprisingly rich in fungi. These indoor fungi – whether transient visitors or more persistent residents – may hold clues to the rising levels of human allergies and other medical and building-related health problems observed globally. The taxo¬nomic identity of these fungi is crucial in such pursuits. Molecular identification of the built mycobiome is no trivial undertaking, however, given the large number of unidentified, misidentified, and technically compromised fungal sequences in public sequence databases. In addition, the sequence metadata required to make informed taxonomic decisions – such as country and host/substrate of collection – are often lacking even from reference and ex-type sequences. Here we report on a taxonomic annotation workshop (April 10–11, 2017) organized at the James Hutton Institute/University of Aberdeen (UK) to facilitate reproducible studies of the built mycobiome. The 32 participants went through public fungal ITS bar¬code sequences related to the built mycobiome for taxonomic and nomenclatural correctness, technical quality, and metadata availability. A total of 19,508 changes – including 4,783 name changes, 14,121 metadata annotations, and the removal of 99 technically compromised sequences – were implemented in the UNITE database for molecular identification of fungi (https://unite.ut.ee/) and shared with a range of other databases and downstream resources. Among the genera that saw the largest number of changes were Penicillium, Talaromyces, Cladosporium, Acremonium, and Alternaria, all of them of significant importance in both culture-based and culture-independent surveys of the built environment.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect Wood from termite attack.
Fluorides are well-known as wood preservatives. One of the limitations of fluoride-based wood preservatives is their high leachability. Alternative to current fluoride salts such as NaF used in wood protection are low water-soluble fluorides. However, impregnation of low water-soluble fluorides into wood poses a challenge. To address this challenge, low water-soluble fluorides like calcium fluoride (CaF2) and magnesium fluoride (MgF2) were synthesized as nanoparticles via the fluorolytic sol−gel synthesis and then impregnated into wood specimens. In this study, the toxicity of nano metal fluorides was assessed by termite mortality, mass loss and visual analysis of treated specimens after eight weeks of exposure to termites, Coptotermes formosanus. Nano metal fluorides with sol concentrations of 0.5 M and higher were found to be effective against termites resulting in 100% termite mortality and significantly inhibited termite feeding. Among the formulations tested, the least damage was found for specimens treated with combinations of CaF2 and MgF2 with an average mass loss less than 1% and visual rating of “1”. These results demonstrate the efficacy of low water-soluble nano metal fluorides to protect wood from termite attack.
The importance of soldiers to termite Society defence has long been recognized, but the contribution of soldiers to other societal functions, such as colony immunity, is less well understood.
We explore this issue by examining the role of soldiers in protecting nestmates against pathogen infection. Even though they are unable to engage in grooming behaviour, we find that the presence of soldiers of the Darwin termite, Mastotermes darwiniensis, significantly improves the survival of nestmates following entomopathogenic infection.
We also show that the copious exocrine oral secretions produced by Darwin termite soldiers contain a high concentration of Proteins involved in digestion, chemical biosynthesis, and immunity. The oral secretions produced by soldiers are sufficient to protect nestmates against infection, and they have potent inhibitory activity against a broad spectrum of microbes. Our findings support the view that soldiers may play an important role in colony immunity, and broaden our understanding of the possible function of soldiers during the origin of soldier-first societies.
Social insects employ a range of behaviours to protect their colonies against disease, but little is known about how such collective behaviours are orchestrated. This is especially true for the social Blattodea (termites). We developed an experimental approach that allowed us to explore how the social response to disease is co-ordinated by multistep host-pathogen interactions. We infected the eastern subterranean termite Reticulitermes flavipes with the entomopathogenic fungus Metarhizium anisopliae, and then, at different stages of infection, reintroduced them to healthy nestmates and recorded behavioural responses. As expected, termites groomed pathogen-exposed individuals significantly more than controls; however, grooming was significantly elevated after fungal germination than before, demonstrating the importance of fungal status to hygienic behaviour. Significantly, we found that cannibalism became prevalent only after exposed termites became visibly ill, highlighting the importance of host condition as a cue for social hygienic behaviour. Our study reveals the presence of a coordinated social response to disease that depends on stage of infection. Specifically, we show how the host may play a key role in triggering its own sacrifice. Sacrificial self-flagging has been observed in other social insects: our results demonstrate that termites have independently evolved to both recognize and destructively respond to sickness.
Territories of rock-inhabiting fungi: Survival on and alteration of solid air-exposed surfaces
(2018)
Subaerial biofilms that are omnipresent at the interface between all solid substrates and the atmosphere are composed of a unique and widespread group of ascomycetes called rock-inhabiting fungi or microcolonial fungi (MCF), typically in communities with other microorganisms. While subaerial biofilms in toto have important roles in mineral weathering and biodeterioration of materials, methodological approaches to subaerial biofilm communities are diverse and frequently focussed on MCF. Here, we review the historical development of the research methods applied in the field and consider perspectives to increase our understanding of the biofilm-induced changes of solid substrate surfaces.
The OECD Working Party on Manufactured Nanomaterials (WPMN) has actively worked towards understanding possible safety issues for manufactured nanomaterials and has contributed significantly to resolving these by developing Test Guidelines, Guidance Documents, Test Reports and other publications with the aim of a safe use of manufactured nanomaterials. To address the specific needs of manufactured nanomaterials, the OECD Test Guideline No. 110 “Particle Size Distribution/Fibre Length and Diameter Distributions” was identified as one of the test guidelines (TGs) to require an update. The current TG 110 (adopted in 1981) is only valid for particles and fibres with sizes above 250 nm. The WPMN prioritised to either update TG 110 to be applicable also to particles at the nanoscale or draft a new nanomaterial specific (TG).
Eventually, it was decided to develop a new TG that covers the size range from 1 nm to 1000 nm, intended for particle size and particle size distribution measurements of nanomaterials. Paragraph 11 provides further justification on the need for such measurements for nanomaterials. This TG overlaps with TG 110 in the size range from 250 nm to 1000 nm. When measuring particulate or fibrous materials, the appropriate TG should be selected depending on the size range of particles tested. In line with TG 110, the new TG for nanomaterials includes separate parts for particles and fibres.
For the part of this TG which addresses particles, several methods applicable to nanomaterials were reviewed and included to take into account developments since 1981 when the TG 110 was adopted. This TG includes the following methods: Atomic Force Microscopy (AFM), Centrifugal Liquid Sedimentation (CLS)/Analytical Ultracentrifugation (AUC), Dynamic Light Scattering (DLS), Differential Mobility Analysis System (DMAS), (Nano)Particle Tracking Analysis (PTA/NTA), Small Angle X-Ray Scattering (SAXS), Scanning Electron Microscopy (SEM), and Transmission Electron Microscopy (TEM). The method Single Particle Inductively Coupled Plasma Mass Spectrometry (sp-ICP-MS) could not be sufficiently validated within the interlaboratory comparison (ILC) carried out for the different methods in this TG (see also paragraph 6 for further details on the ILC). Applicability of sp-ICP-MS is strongly limited to nanomaterials with high mass values in combination with a sufficiently high particle size. However, the general method ICP-MS is widely used and the sp-mode for the size measurement of specific nanomaterials was successfully performed in ILCs elsewhere. The method is therefore included in the Appendix Part C of this TG, which further details the limitations of sp-ICP-MS.
For measuring the diameter and length of fibres, analysing images captured with electron microscopy is currently the only method available. This TG includes Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM).
To test the validity of this TG, an ILC was performed. Test materials were chosen to reflect a broad range of nanomaterial classes, e.g. metals, metal oxides, polymers and carbon materials. Where possible, well-characterised test materials were used.
Additionally, the test materials were chosen to reflect a broad range of sizes representing the size range 1 nm to 1000 nm. Specifically for fibres, a broad range of aspect ratios was included (length/diameter of 3 to > 50). Some of the test materials used are commercially available and further references are given in the validation report of the ILC. Sample preparation for physical chemical characterisation is critical for all listed methods. Due to the differences between individual nanomaterials and due to the wide range of individual material properties it is impossible to have a generic protocol to obtain the best possible sample preparation for every nanomaterial. Therefore, a generic protocol on sample preparation is not part of this TG. Information on sample preparation is given in the paragraphs 25-29, 33, 34 and 39 for particles and in paragraphs 159) for fibres. Further information on sample preparation of nanomaterials for physical chemical characterisation can be found in the OECD Guidance on Sample Preparation and Dosimetry for the Safety Testing of Manufactured Nanomaterials and elsewhere.
The particle size distribution is considered the most relevant information for nanoscale property identification and material characterization. The current OECD test guideline on particle size and size distribution (TG 110) is not applicable to ‘nano-sized’ objects. In this project we thus develop a new OECD test guideline for the measurement of the size and size distribution of particles and fibers with at least one dimension in the nanoscale. A fiber is defined as an object having an aspect ratio of length/diameter l/d >3. The width and length of each fiber should be measured concurrently.
In order to measure the particle size distributions, many techniques are available. 9 methods for particles and 2 methods for fibres have been tested in a prevalidation study and appropriate methods will be compared in an interlaboratory round robin test starting in February 2019.
The particle size distribution is considered the most relevant information for nanoscale property identification and material characterization. The current OECD test guideline on particle size and size distribution (TG 110) is not applicable to ‘nano-sized’ objects. In this project we thus develop a new OECD test guideline for the measurement of the size and size distribution of particles and fibers with at least one dimension in the range of 1 - 1000 nm. A fiber is defined as an object having an aspect ratio of length/diameter l/d >3. The width and length of each fiber should be measured concurrently.
In order to measure the particle size distributions, many techniques are available. 9 methods for particles and 2 methods for fibres have been tested in a prevalidation study and appropriate methods will be compared in an interlaboratory round robin test starting in February 2019.
The particle size distribution is considered the most relevant information for nanoscale property identification and material characterization. The current OECD test guideline on particle size and size distribution (TG 110) is not applicable to ‘nano-sized’ objects. In this project we thus develop a new OECD test guideline for the measurement of the size and size distribution of particles and fibers with at least one dimension in the range of 1 - 1000 nm. A fiber is defined as an object having an aspect ratio of length/diameter l/d >3. The width and length of each fiber should be measured concurrently.
In order to measure the particle size distributions, many techniques are available. 9 methods for particles and 2 methods for fibres have been tested in a prevalidation study and appropriate methods will be compared in an interlaboratory round robin test starting in February 2019.
This paper reports the outcome of an interdisciplinary team’s application of multispectral imaging techniques and material analysis to a music fragment from the first decades of the fifteenth century: Atri, Archivio Capitolare, Museo della Basilica Cattedrale, Biblioteca del Capitolo della Cattedrale, Frammento 17. This important parchment leaf has rarely been investigated since its discovery 45 years ago. Thanks to the applied techniques and methods (such as the evaluation of the data using the fingerprint model), it is now possible to discuss new evidence supporting conclusions regarding the fragment’s origin and afterlife.
The BAM Data Store
(2023)
As a partner in several NFDI consortia, the Bundesanstalt für Materialforschung und -prüfung (BAM, German federal institute for materials science and testing) contributes to research data standardization efforts in various domains of materials science and engineering (MSE). To implement a central research data management (RDM) infrastructure that meets the requirements of MSE groups at BAM, we initiated the Data Store pilot project in 2021. The resulting infrastructure should enable researchers to digitally document research processes and store related data in a standardized and interoperable manner. As a software solution, we chose openBIS, an open-source framework that is increasingly being used for RDM in MSE communities.
The pilot project was conducted for one year with five research groups across different organizational units and MSE disciplines. The main results are presented for the use case “nanoPlattform”. The group registered experimental steps and linked associated instruments and chemicals in the Data Store to ensure full traceability of data related to the synthesis of ~400 nanomaterials. The system also supported researchers in implementing RDM practices in their workflows, e.g., by automating data import and documentation and by integrating infrastructure for data analysis.
Based on the promising results of the pilot phase, we will roll out the Data Store as the central RDM infrastructure of BAM starting in 2023. We further aim to develop openBIS plugins, metadata standards, and RDM workflows to contribute to the openBIS community and to foster RDM in MSE.
Museums worldwide are equipped with different display cases. Exhibit display cases should protect cultural objects from dust as well as from mechanical and physical damage. To ensure a stable climate inside the display cases, a low air exchange rate is maintained. Typically, air exchange rates are often smaller than 0.1 d-1, which can result in rising concentrations of potential harmful VOC inside of the display cases due to emissions from materials. Especially organic acids, e. g. formic or acetic acid which can emit from e.g. sealing materials or wood-based materials, can produce damage of cultural objects.
In 2012 BAM introduced a procedure which is called: BEMMA-Scheme (Bewertung von Emissionen aus Materialien für Museums¬ausstattungen) which stands for: “Assessment of Emissions from Materials for Museum Equipment”. Regarding the testing procedure only construction materials were evaluated, not the display cases their self. Micro chambers are used for VOC emission tests of display case construction materials, e.g. plastics, sealing materials, coatings, textiles and others. Each sampling procedure is carried out in duplicate. Emissions like formic acid, acetic acid, formaldehyde, piperidine-derivates and oximes are excluded and the sum of emissions of VVOCs, VOCs and SVOCs is limited. For a positive assessment all listed criteria must be fulfilled; otherwise the display construction material fails the BEMMA scheme.
The chemical state of antimony and vanadium species in municipal solid waste incineration bottom ash
(2023)
Due to the large quantity as residual mineral waste, municipal solid waste incineration - bottom ash (MSWI-BA) is an interesting secondary raw material that can be utilized for road construction. However, leaching of chloride, sulfate and potentially hazardous heavy metals from MSWSI-BA into the environment may cause problems in utilization of it in civil engineering. In a previous study, we performed a long-term leaching test of MSWI-BA in a lysimeter for almost six years to investigate the efficiency of the treatment process on the release of hazardous substances. While concentrations of chloride, sulfate and the majority of the heavy metals started to decrease rapidly with progressive liquid-to-solid ratio (L/S), the ecotoxic hazardous elements antimony (Sb) and vanadium (V) behaved differently. To unravel these unusual release behaviors and the oxyanion-formation of Sb and V we will apply HERFD-XANES spectroscopy to analyze their chemical state.
The compatible solute ectoine: protection mechanisms, strain development, and industrial production
(2020)
Bacteria, Archaea, and Eukarya can adapt to saline environments by accumulating compatible solutes in order to maintain an osmotic equilibrium. Compatible solutes are of diverse chemical structure (sugars, polyols, amino acid derivatives) and are beneficial for bacterial cells not only as osmoregulatory solutes but also as
protectants of proteins by mitigating detrimental effects of freezing, drying, and high temperatures. The aspartate derivative ectoine is a widespread compatible solute in Bacteria and possesses additional protective properties compared with other compatible solutes and stabilizes even whole cells against stresses such as ultraviolet radiation or cytotoxins. Here, it is our intention to go beyond a simple description of effects, but to depict the molecular interaction of ectoine with biomolecules, such as proteins, membranes, and DNA and explain the underlying principles. The stabilizing properties of ectoine attracted industry, which saw the potential to market ectoine
as a novel active component in health care products and cosmetics. In joint efforts of industry and research, a large-scale fermentation procedure has been developed with the halophilic bacterium Halomonas elongata used as a producer strain. The development and application of ectoine-excreting mutants from H. elongata (“leaky” mutants) allow for the annual production of ectoine on a scale of tons. The details of
the strain development and fermentation processes will be introduced.
Rock weathering is a key process in global elemental cycling. Life participates in this process with tangible consequences observed from the mineral interface to the planetary scale. Multiple lines of evidence show that microorganisms may play a pivotal—yet overlooked—role in weathering. This topic is reviewed here with an emphasis on the following questions that remain unanswered: What is the quantitative contribution of bacteria and fungi to weathering? What are the associated mechanisms and do they leave characteristic imprints on mineral surfaces or in the geological record? Does biogenic weathering fulfill an ecological function, or does it occur as a side effect of unrelated metabolic functions and biological processes? An overview of efforts to integrate the contribution of living organisms into reactive transport models is provided. We also highlight prospective opportunities to harness microbial weathering in order to support sustainable agroforestry practices and mining activities, soil remediation, and carbon sequestration.
Currently, corrosion rates (CR) and/or corrosion products (CP) obtained for methanogen-induced microbiologically influenced corrosion (Mi-MIC) on carbon steel are mainly analyzed from static-incubations. By using a multiport-flow-column, much higher CRs (0.72 mm/yr) were observed, indicating static-incubations are not suitable for determining the corrosive potential of Mi-MIC. With the combination of various analytical methods (ToF-SIMS/SEM-EDS/SEM-FIB) and contrary to previously published data, we observed that CPs contained phosphorus, oxygen, magnesium, calcium and iron but lacked carbon-related species (e.g. siderite). Overall, siderite nucleation is disrupted by methanogens, as they convert aqueous bicarbonate into carbon dioxide for methanogenesis resulting in increased localized corrosion.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
Glutaraldehyde is widely used as a disinfectant and preservative, but little is known about its effects on bacterial susceptibility to antibiotics and the selection of tolerant phenotypes. We found that short-term exposure to sub-inhibitory levels of glutaraldehyde makes E. coli resistant to high doses of bactericidal antibiotics from different classes. This tolerance is associated with delayed, heterogeneous regrowth dynamics and global transcriptome remodeling. We identified over 1200 differentially expressed genes, including those related to antibiotic efflux, metabolic processes, and the cell envelope. The cells entered a disrupted state likely due to the unspecific mode-of-action of glutaraldehyde. Despite this unregulated response, we identified several differentially expressed genes not previously associated with antibiotic tolerance or persistence that induce antibiotic tolerance when overexpressed alone. These findings highlight how the unspecific mode-of-action of disinfectants can make bacteria temporarily resistant to antibiotics. They have implications for settings where disinfectants and antibiotics are used in close proximity, such as hospitals and animal husbandry, and for the selection dynamics of tolerant pheno- and genotypes in fluctuating environments where microorganisms are exposed to these substances, such as sewage systems. A trade-off arises from overcoming the disrupted state as quickly as possible and maintaining antibiotic tolerance.
Glutaraldehyde (GTA) is commonly used to disinfect medical equipment, in animal husbandry and in hydraulic fracturing. Its wide use bears the risk that microorganisms in different environments are exposed to potentially non-lethal doses of glutaraldehyde. To date, little is known about the effects of glutaraldehyde on the susceptibility of bacteria to antibiotics and its role in the selection of tolerant phenotypes.
Objectives
• To determine the effect of glutaraldehyde exposure on the survival of E. coli, S. aureus and P. aeruginosa to antibiotics
• To find the mechanistic basis for antibiotic tolerance upon glutaraldehyde exposure
Materials & Methods
Four bacterial isolates were exposed to sub-inhibitory glutaraldehyde. Antibiotic tolerance was determined by time-kill assays. Regrowth dynamics (lag times) were determined with ScanLag. E. coli was further investigated, using RNAseq to identify genes and processes involved in antibiotic tolerance. Mutants of candidate genes were screened for their antibiotic tolerance and heterogeneous target gene expression under stressed and unstressed conditions.
Results
Short-term exposure to sub-inhibitory levels of glutaraldehyde induced tolerance to high doses of bactericidal antibiotics. Tolerance to antibiotics was associated with highly heterogeneous regrowth dynamics and global transcriptome remodeling. Differentially expressed genes represented diverse biological functions and cellular components, including antibiotic efflux, metabolic processes, and the cell envelope. The heterogeneous regrowth dynamics and the diversity of the differentially expressed genes are likely related to the unspecific mode-of-action of glutaraldehyde. Among the many differentially expressed genes, several genes were identified that were not previously associated with antibiotic tolerance or persistence, which, when overexpressed alone, increased antibiotic tolerance.
Conclusion
Our results highlight how the big advantage of a disinfectant, its unspecific mode-of-action, can induce transient tolerance to antibiotics in bacteria. These findings have implications for 1.) settings where disinfectants and antibiotics are used in proximity, such as hospitals and animal husbandry, and 2.) for the selection dynamics of tolerant bacteria in fluctuating environments because of the trade-off that arises from overcoming the lag phase as fast as possible and maintaining antibiotic tolerance.
Medieval stained-glass windows are protected by an outside gazing system in many churches.The interspace between the original and the protective glass is ventilated with air from the indoor or exterior environment, where dust and particles can move.Cascade impactor measurements and SEM/EDX analyses of sampled dust were carried to determine the dust composition. The effect of particles on model glass samples was investigated in climate chambers under accelerated weathering conditions. The results from in situ measurements and laboratory tests were combined to evaluate the potential effect of particulate matter on historic stained-glass Windows.
Microplastics are increasingly entering marine, limnic and terrestrial ecosystems worldwide, where they sorb hydrophobic organic contaminants. Here, the sorption behavior of the fuel-related water contaminants benzene, toluene, ethyl benzene and xylene (BTEX) and four tertiary butyl ethers to virgin and via UV radiation aged polypropylene (PP) and polystyrene (PS) pellets was investigated. Changes in material properties due to aging were recorded using appropriate polymer characterization methods, such as differential scanning calorimetry, Fourier transform infrared spectroscopy, gel permeation chromatography, X-ray photoelectron spectroscopy, and microscopy.
Pellets were exposed to water containing BTEX and the ethers at 130-190 mg/L for up to two weeks.
Aqueous sorbate concentrations were determined by headspace gas chromatography. Sorption to the polymers was correlated with the sorbate's Kow and was significant for BTEX and marginal for the ethers.
Due to substantially lower glass transition temperatures, PP showed higher sorption than PS. Aging had no effect on the sorption behavior of PP. PS sorbed less BTEX after aging due to an oxidized surface layer.
The termites are a derived eusocial lineage of otherwise non-social cockroaches. Understanding the proximal and ultimate drivers of this major evolutionary transition represents an important goal in biology. One outstanding question concerns the evolution of termite immunity, which is thought to have undergone broad-sweeping adaptations in order to enhance group-level immune protection. To understand the evolutionary origins of termite immunity, we conducted qualitative and quantitative transcriptome analyses along a gradient of sociality. Firstly, we aimed to identify large-scale genetic shifts in immune traits linked to eusociality by comparing immune gene repertoires in solitary and subsocial cockroaches and across a range of eusocial termite lineages. Secondly, we compared the responses of a solitary cockroach, a subsocial wood-roach and different castes of a lower termite species to a non-specific immune challenge, in order to understand how sociality may have influenced the evolution of immune gene regulation. Firstly, we found that termites have a broadly representative repertoire of canonical immune genes as compared to gregarious cockroaches and subsocial wood-roaches. Secondly, with respect to immune challenge, the solitary cockroach and the subsocial wood-roach displayed a similarly comprehensive induced response, while the termite response was considerably dampened by comparison and strongly influenced by caste; with reproductives displaying a generally higher constitutive level of immune-gene expression compared to sterile castes. In summary we did not find termite eusociality to be associated with significant changes in immune gene diversity, but rather to be linked with significant modifications to the regulation of immunity following the origin of division of labour.
A broad suite of immune adaptations have evolved in social insects which hold close parallels with the immune systems of multicellular individuals. However, comparatively little is known about the evolutionary origins of immunity in social insects. We tackle this by identifying immune genes from 18 cockroach and termite species, spanning a gradient of social lifestyles. Termites have undergone contractions of major immune gene families during the early origin of the group, particularly in antimicrobial effector and receptor proteins, followed by later re-expansions in some lineages. In a comparative gene expression analysis, we find that reproductive individuals of a termite invest more in innate immune regulation than other castes. When colonies encounter immune-challenged nestmates, gene expression responses are weak in reproductives but this pattern is reversed when colony members are immune-challenged individually, with reproductives eliciting a greater response to treatment than other castes. Finally, responses to immune challenge were more comprehensive in both subsocial and solitary cockroaches compared to termites, indicating a reduced overall ability to respond to infection in termites. Our study indicates that the emergence of termite sociality was associated with the evolution of a tapered yet caste-adapted immune system.
The termites are a derived eusocial lineage of otherwise non-social cockroaches. Understanding the proximal and ultimate drivers of this major evolutionary transition represents an important goal in biology. One outstanding question concerns the evolution of termite immunity, which is thought to have undergone broad-sweeping adaptations in order to enhance group-level immune protection. To understand the evolutionary origins of termite immunity, we conducted qualitative and quantitative transcriptome analyses along a gradient of sociality. Firstly, we aimed to identify large-scale genetic shifts in immune traits linked to eusociality by comparing immune gene repertoires in solitary and subsocial cockroaches and across a range of eusocial termite lineages. Secondly, we compared the responses of a solitary cockroach, a subsocial wood-roach and different castes of a lower termite species to a non-specific immune challenge, in order to understand how sociality may have influenced the evolution of immune gene regulation. Firstly, we found that termites have a broadly representative repertoire of canonical immune genes as compared to gregarious cockroaches and subsocial wood-roaches. Secondly, with respect to immune challenge, the solitary cockroach and the subsocial wood-roach displayed a similarly comprehensive induced response, while the termite response was considerably dampened by comparison and strongly influenced by caste; with reproductives displaying a generally higher constitutive level of immune-gene expression compared to sterile castes. In summary we did not find termite eusociality to be associated with significant changes in immune gene diversity, but rather to be linked with significant modifications to the regulation of immunity following the origin of division of labour.
As more industrial interests focusing on using salt caverns and repurposed gas or petroleum reservoirs for alternative fuel storage, i.e. CO2/H2, the question raises whether microorganisms may impact the infrastructure, gas purity and storage condition over time.
Environments with high salinity (> 1.5 Meq of NaCl) are resided by halophiles (salt-loving microorganisms). To compensate for the intensive osmotic stress, they have resorted to two main adaptation strategies: 1) production of compatible solutes and 2) accumulation of intracellular KCl. Microbial community analysis of several high salinity environments revealed a number of recurring genera, including Halomonas and Halanaerobium. However, the impact of halophiles on the overall integrity and stability of the storage facilities remain largely unknown.
To evaluate the suitability and stability of saline storage facilities, several model halophilic microorganisms, such as members of Halomonas, will be selected as testing subjects. First, the impact of halophiles on the infrastructure will be determined using an integrative approach by combining a number of techniques, including electrochemistry, TOF-SIMS, SEM/FIB/EDS and FIB-TEM. Second, the abilities of halophiles to alter the fuel composition (i.e. increase/decrease the fractions of H2) will be monitored using gas chromatography by growing them under high pressure.
As a result of climate change and the accompanying mandatory shift to renewable energy resources, microorganisms will continue to play an important role in the energy sector, both to their benefit and detriment. Thus, it is important to achieve a certain level of understanding regarding the activities and mechanisms of halophiles prior to large-scaled excursions.
Microbiologically influence corrosion (MIC) has become a big concern due the increased usage of different metals by our society. Microorganisms can use metal as an electron donor, causing unpredictable but serious damages. Nowadays it is known that besides sulfate reducing bacteria (SRB), other microorganisms including acetogens, iron oxidizers and methanogens can also induce MIC. Current studies related to methanogen-induced MIC (MI-MIC) mainly focused on environmental isolates from the oil and gas industry (e.g. Methanococcus maripaludis) with industrial materials e.g. iron. However, MI-MIC can occur in many other environments as well, including the oral cavity. Methanobrevibacter oralis is a methanogen isolated from the human oral cavity and was found more frequently in patients suffering from peri-implantitis/periodontitis. Titanium-implants removed from those patients have also showed clear signs of corrosion. The aim of our study is to establish and analyze corrosion potentials of dental metals (e.g. titanium) by oral methanogens. Periodontal pockets samples from patients suffering from periodontitis/peri-implantitis were taken for methanogenic and SRB enrichments. Stainless steel, pure titanium or Ti-6Al-4V alloy was used for corrosion studies. Corrosion rates and methane production were measured using weight-loss method and gas chromatography, respectively. Metal surfaces were visualized with scanning electron microscopy. Microbial communities in the dental pockets of healthy people and patients will be compared using 16S rRNA amplicon sequencing. Overall, this is the first study investigating the susceptibility of different dental implant materials to corrosion using human-related Archaea. The outcomes of this study can be further explored for a variety of clinical applications.
Aim. The European biocidal products regulation requires environmental risk assessments for biocidal products under service conditions. This is only possible, if processes that lead to biocide emissions into the environment are understood and can be reasonably predicted.
Actual emissions due to leaching result from different processes that are affected by material properties and environmental conditions. Transformation of biocides can affect emissions considerably.
Leaching and possible transformation of the film preservatives carbendazim, diuron, OIT and terbutryn in paints was observed under laboratory and field conditons in order to investigate the influence of different factors, e.g. water contact and radiation on biocide emissions. The paints contained either white titanium dioxide or a red iron oxide pigment to check whether pigments affect leaching processes.
Methods. Test specimens of a water-based styrene acrylic dispersion paint on glass were exposed to UVA-radiation in a UV weathering device and/or exposed to water contact by immersion events on the basis of the European standard EN 16105. Plywood panels were coated and exposed to natural weather conditions in a semi-field experiment. Concentrations of biocides and transformation products were analysed in leachates from laboratory tests, runoff samples and remaining coatings.
Results. The impact of weathering conditions on transformation processes differs for the investigated active substances. Water contact, radiation as well as pigments in the paints determine the pattern and amount of transformation products on coatings, leachates and runoff water. Observations from laboratory and field experiments were compared. It proved that results from laboratory tests support understanding of data from field experiments.
Detailed knowledge on the fate of active substances under environmental conditions supports manufacturers to develop safe applications of film preservatives and authorities to evaluate its environmental impact.
Weather conditions affect biocides on exposed outer surfaces on constructions. Contact with water causes hydrolysis and leaching of substances. Ultraviolet radiation may induce photolysis. As a result, a mixture of biocidal active substances and transformation products can be emitted into the environment. In a semi-field study, leaching of the biocidal active substances terbutryn, diuron, octylisothiazolinone, carbendazim, and selected transformation products was observed for two paints containing either a white or a red pigment. Painted test panels were exposed to natural weathering for about 1.5 years. Runoff samples were analyzed during the course of the experiment.
At the end of the study, residues of biocidal active substances and transformation products were determined in sections of the test panels. Emissions of substances were mainly observed during the first few months of the experiments. Increased emissions of transformation products were observed during periods of increased global radiation and subsequent periods with relatively high amounts of driving rain. Different patterns of transformation products were observed, especially for terbutryn, both for paints containing different pigments and in experiments that were started in different periods of the year, as well as during different periods of the experiments.
Textile floor coverings are often used in offices and residential buildings. Large areas like meeting rooms, cinemas, theaters and hotels are often equipped with such coverings. They contribute to the comfort of the users as they provide high pedaling comfort and sound absorption. The weakness of these building materials is due to the odor emission that is released from the floor covering, which affects the comfort of the users. A bad air quality and the resulting dissatisfaction can lead to lower employee productivity. The research project of the Hochschule für Technik und Wirtschaft Berlin (HTW-Berlin) is promoted by the German Environment Agency (UBA). The project has the following title: Low-emission and low-odor building products for energy-efficient buildings - Development of requirements and concepts for the Blue Angel from a climate protection perspective; investigates the emission and odor behavior of textile floor coverings (Emissions- und geruchsarme Bauprodukte für energieeffiziente Gebäude - Entwicklung von Anforderungen und Konzepten für den Blauen Engel aus Klimaschutzsicht; untersucht das Emissions- und Geruchsverhalten textiler Bodenbeläge).
The Interdisciplinary Alchemist: Reproduction and Study of Black Inks from the Islamicate World
(2019)
The identification of the materials constituting an artefact is the basis of any correct conservation project, for this reason (among others) in the last 50 years analytical techniques have been applied to the study of manuscripts. Unfortunately, the scientific investigation of Arabic books is still uncommon, focusing mainly on single case studies, often producing unclear results, especially for black inks. This lack of knowledge prompted a recent research in which black ink recipes have been collected from written Arabic sources on bookmaking, their feasibility has been assessed, and finally some of them have been reproduced. These samples were artificially aged and analysed through an array of analytical techniques, mostly non-invasive and non-destructive, in order to build a database of Arabic inks and their ingredients and also to verify the detection limits of the portable equipment employed. In this talk I will present some instances of how this approach can help textual criticism, for example in evaluating variants and determining the competence of authors and compilers. At the same time the research highlights how much this scientific work depends on textual studies, especially concerning the identification of ingredients. Moreover, I will focus on some of the problematics I faced both during the textual interpretation and the actual reproduction of the recipes and how they influenced the results of the scientific analyses. In particular I’ll look into the role played by the degree of purity of the components and the function (real and perceived) of some of the ingredients.
The evolutionary success of termites has been driven largely by a complex communication system operated by a rich set of exocrine glands. As many as 20 different exocrine organs are known in termites. While some of these organs are relatively well known, only anecdotal observations exist for others. One of the exocrine organs that has received negligible attention so far is the labral gland. In this study, we examined the structure and ultrastructure of the Labrum in soldiers of 28 termite species. We confirm that the labral gland is present in all termite species, and comprises two secretory regions located on the ventral side of the labrum and the dorso-apical part of the hypopharynx. The Labrum of Neoisoptera has a hyaline tip, which was secondarily lost in Nasutitermitinae, Microcerotermes and species with snapping soldiers. The epithelium of the gland generally consists of class 1 secretory cells, with an addition of class 3 secretory cells in some species. A common feature of the secretory cells is the abundance of smooth endoplasmic reticulum, an organelle known to produce lipidic and often volatile secretions. Our observations suggest that the labral gland is involved in communication rather than defence as previously suggested. Our study is the first to provide a comprehensive picture of the structure of the labral gland in soldiers across all Termite taxa.