4 Material und Umwelt
Filtern
Dokumenttyp
Referierte Publikation
- ja (57) (entfernen)
Schlagworte
- Leaching (12)
- Bottom ash (6)
- Construction products (5)
- Biocides (4)
- Circular economy (4)
- Degradation (4)
- Geosynthetics (4)
- Geotextiles (3)
- PFAS (3)
- Phosphorus (3)
- Sewage sludge (3)
- XANES spectroscopy (3)
- Analytical methods (2)
- Combustion ion chromatography (CIC) (2)
- Ecotoxicity (2)
- Extractable organically bound fluorine (EOF) (2)
- Fertilizer (2)
- High resolution-continuum source-graphite furnace molecular absorption spectrometry (HR-CS-GFMAS) (2)
- Incineration bottom ash (2)
- Leaching tests (2)
- Marine littering (2)
- Passive sampling (2)
- Per- and Polyfluoroalkyl substances (PFAS) (2)
- Recycling (2)
- Soil (2)
- Substance release (2)
- Transformation (2)
- Waste-to-energy (2)
- Weathering (2)
- X-ray absorption near-edge structure (XANES) spectroscopy (2)
- XANES (2)
- Adsorbable organically bound fluorine (AOF) (1)
- Aging (1)
- Air pollution control (1)
- Ammonium (1)
- Analytical screening techniques (1)
- Antimony (1)
- Artificial ageing (1)
- Artificial weathering (1)
- Assessment (1)
- Aufbereitung (1)
- BTEX (1)
- Baltic Sea (1)
- Batch tests (1)
- Bauxite Residue (1)
- Biotests (1)
- Building Material (1)
- Building materials (1)
- Chemical analysis (1)
- Chemical extraction (1)
- Chemical recycling (1)
- Chemisches Recycling (1)
- Chicken manure ash (1)
- Circular Economy (1)
- Coastal protection (1)
- Combustion Ion Chromatography (1)
- Combustion ion chromatography (1)
- Comsumer good samples (1)
- Concept (1)
- Construction materials (1)
- Construction products regulation (CPR) (1)
- Contamination (1)
- Density separation (1)
- Deponie (1)
- Design of experiments (1)
- Diffusive Gradients in thin films (DGT) (1)
- Diffusive gradients in thin films (DGT) (1)
- Diffusive gradients in thin-films (DGT) (1)
- Driving rain (1)
- Dry treatment (1)
- Dynamic surface leaching test (1)
- Ecotoxicity tests (1)
- Ecotoxicological tests (1)
- Ecotoxixity (1)
- Eluates (1)
- Emission (1)
- Environmental Chemistry (1)
- Environmental Engineering (1)
- Environmental assessment (1)
- Environmental impact (1)
- Environmental simulations (1)
- Ersatzbaustoff (1)
- Exergie (1)
- Extractable organic fluorine (1)
- Fertilzer (1)
- Fire-retardant paint (1)
- Fluoride (1)
- Forest soils (1)
- General Chemistry (1)
- General Medicine (1)
- Geokunststoffe (1)
- Geomembranes (1)
- Global radiation (1)
- Groundwater (1)
- Grouts (1)
- Health, Toxicology and Mutagenesis (1)
- Heavy metals (1)
- Indirect photolysis (1)
- Inter-laboratory test (1)
- Interlaboratory comparison (1)
- Intraparticle diffusion (1)
- Intumescent coating (1)
- Iron scrap (1)
- Joint grouts (1)
- Kreislaufwirtschaft (1)
- Kunststoffdichtungsbahnen (1)
- Kupfer (1)
- LC-MS/MS (1)
- Landfill (1)
- Landfill lining (1)
- Langzeitverhalten (1)
- Limit values (1)
- Lysimeter (1)
- MSWI bottom ash (1)
- Mass spectrometry (1)
- Mathematical analysis (1)
- Mechanochemistry (1)
- Metal recovery (1)
- Microplastic (1)
- Mining (1)
- Mixture toxicity (1)
- Molybdenum (1)
- Nano-materials (1)
- Nitrification inhibitor (1)
- Non-ferrous metals (1)
- Nutrient (1)
- OIT (1)
- Oil (1)
- Organic contaminants (1)
- Oxyfuel-Verbrennung (1)
- Per- and polyfluorinated alkly substances (PFASs) (1)
- Per- and polyfluorinated alkyl substances (PFASs) (1)
- Per- and polyfluoroalkyl substances (PFAS) (1)
- Pesticides (1)
- Phoshpor availability (1)
- Phosphorus fertilizer (1)
- Phosphorus recovery (1)
- Plant availability (1)
- Plastic waste (1)
- Pollution (1)
- Polymer-based products (1)
- Polypropylene (1)
- Polystyrene (1)
- Polyurethanes (1)
- Porosity (1)
- Potential toxic elements (1)
- Prospective risk assessment (1)
- Public Health, Environmental and Occupational Health (1)
- Pyrolyse (1)
- Pyrolysis (1)
- Raman spectroscopy (1)
- Red Mud (1)
- Reductive decomposition (1)
- Reductive defluorination (1)
- Regulation (1)
- Remediation (1)
- Resources (1)
- Rostasche (1)
- Round robin test (1)
- Salts (1)
- Sc recovery (1)
- Scandium (1)
- Secondary building materials (1)
- Setzmaschine (1)
- Sewage sludge ash (1)
- Soil contact (1)
- Soil-like material (1)
- Soils (1)
- Solid phase extraction (SPE) (1)
- Solid-liquid extraction (1)
- Solvolyse (1)
- Solvolysis (1)
- Sorption (1)
- Standardization (1)
- Stop/flow experiments model (1)
- Sugar cane bagasse (1)
- Sum parameter (1)
- Surface water (1)
- Surface waters (1)
- Targeted and nontargeted (1)
- Terbutryn (1)
- Thermal degradation (1)
- Thermal treatment (1)
- Thermo-desorption (1)
- Thermochemical treatment (1)
- UV radiation (1)
- Umweltverträglichkeit (1)
- Utilisation (1)
- Validation trial (1)
- Vanadium (1)
- Waste incineration (1)
- Waste management (1)
- Waste treatment (1)
- Water contact (1)
- Wood ash (1)
- Wood samples (1)
- X-ray diffraction (1)
- XRF (1)
- fertilizer (1)
- microspectroscopy (1)
- soil (1)
- x-ray diffraction (1)
Organisationseinheit der BAM
- 4.3 Schadstofftransfer und Umwelttechnologien (57) (entfernen)
Paper des Monats
- ja (4)
The environmental compatibility of reactive fire-retardant coatings (intumescent paints) was investigated by a combination of leaching and ecotoxicological tests. Three representative fire-retardant coating systems were tested using two leaching procedures: “Horizontal Dynamic Surface Leaching Test” (DSLT) and the “Intermittent Immersion Test” (IIT). All eluate fractions (8 for DSLT and 9 for IIT) were analyzed for pH, conductivity, concentration of total organic carbon and selected anions und cations. Additionally, a GC-MS screening of selected fractions was conducted for identification of organic compounds. Eluate fractions 1 + 2 and fraction 7 of the DSLT were analyzed in four ecotoxicological tests (algae, daphnia, fish egg, luminescent bacteria) and in one genotoxicity test (umu). Concentration of most analytes was rather low or below limit of detection for many eluates. Analytes detected in eluates of all three products are Zn, Ba, SO4(2−) and PO4(3−). Release patterns do not indicate a general trend: some compounds show maximum release in the first fractions while for others the maximum was observed in later test stages. Ecotoxic effects in eluates were found, which were higher in the eluate fraction 7 (maximum lowest ineffective dilution for luminescent bacteria (LIDL) 256) than in the eluate fraction 1 + 2 (maximum LIDL = 24). The sensitivity of the test systems was very different with highest effects for luminescent bacteria, followed by algae and daphnia and without effects in the fish egg test and umu test. A biotest battery for the comprehensive assessment is therefore advisable.
Column leaching tests are frequently used and accepted for investigation of release of hazardous substances from solid materials. Independent of differences due to the field of application or national regulations, column tests assume that local equilibrium is established in the experiment which facilitates transfer of results to field conditions. In the process of harmonization and standardization within Europe the question on the influence of flow rate and grain size distribution on the local equilibrium was raised. Thus, a set of experiments using two different masonry materials with varying grain size distribution and flow rate were conducted including stop/flow experiments. Results are compared to a numerical model which takes intraparticle pore diffusion-controlled release of Mo and V into the percolating water into account. Due to the relatively high intraparticle porosity of the materials (24–29%) data and model indicate that initially equilibrium-state conditions prevail followed by rapidly decreasing concentrations. The model fits data for Mo and V reasonably well; however, after the initial decline of concentrations (at L/S > 2) extended tailing is observed especially of elements occurring as oxides, which is not captured by the model.
In Denmark, increasing amounts of woody biomass are being used for the production of renewable energy, resulting in more wood ashes being generated. While these materials have been mainly landfilled, wood ashes may also be utilised for fertilizing and liming purposes on top of soils. Pre-treatments involving hardening or granulation may be carried out prior to soil application. In this study, two Danish wood ash samples were hardened and/or granulated. Lab-hardening induced rapid changes in the shape of the acid neutralisation capacity curve of the ashes. Up-flow column tests, assuming local equilibrium conditions, were employed to investigate the leaching from pre-treated ashes. Granules and loose ashes demonstrated similar leaching behaviours, indicating that similar geochemical processes were governing their leaching. In comparison with untreated fresh ashes, the hardened ashes demonstrated reduced leaching of Ca, Ba, Pb and Zn with concentration levels generally below or close to the analytical limits of quantification; to the contrary, the leaching of As, P, Sb, Si, V and Mg was enhanced in the hardened ashes. The release of alkalinity was reduced by hardening. In general, all granules were barely breakable by finger-pinching and they could withstand one month of continuous leaching, preserving their overall shape. The solubility of phosphorous in neutral ammonium citrate indicated that about 30–51% of the total P content in the ash samples was released, suggesting that the ashes could be potentially valuable as P-fertiliser if applied onto soil.
Biocides are commonly applied to construction materials such as facade renders and paints in order to protect them from microbial spoilage. These renders and paints are exposed to weathering conditions, e.g., sunlight and rain. Pigments are interacting intensively with the spectrum of the incoming light; thus, an effect of paint pigments on phototransformation rates and reaction pathways of the biocides is hypothesized.
In this study, the phototransformation of four commonly used biocides (carbendazim, diuron, octylisothiazolinone (OIT) and terbutryn) in four different paint formulations differing solely in pigments (red and black iron oxides, white titanium dioxide, and one pigment-free formulation) were investigated. Paints surfaces were irradiated under controlled conditions. The results show that biocides degrade most rapidly in the pigment-free formulation. The degradation in the pigment-free formulation followed a first-order kinetic model with the respective photolysis rate constants: kp,Diuron=0.0090 h−1, kp,OIT=0.1205 h−1, kp,Terbutryn=0.0079 h−1.
Carbendazim concentrations did not change significantly. The degradation was considerably lower in the pigment-containing paints. The determination of several phototransformation products of terbutryn and octylisothiazolinone showed different transformation product ratios dependent on the pigment. Consequently, pigments not only reflect the incoming light, but also interact with the biocide photodegradation.
Rohstoffe sind knapp. Hinzu kommt, dass auf dem Weg vom Erz zum Metall viel Energie benötigt wird, mechanische Energie beim Zerkleinern, thermische Energie beim Schmelzen oder elektrische Energie bei der Elektrolyse. Ausgedrückt als Exergie kann man die Verbräuche gut vergleichen. Die meisten technischen Prozesse sind aber vom berechneten thermodynamischen Optimum weit entfernt.
Microplastics are increasingly entering marine, limnic and terrestrial ecosystems worldwide, where they sorb hydrophobic organic contaminants. Here, the sorption behavior of the fuel-related water contaminants benzene, toluene, ethyl benzene and xylene (BTEX) and four tertiary butyl ethers to virgin and via UV radiation aged polypropylene (PP) and polystyrene (PS) pellets was investigated. Changes in material properties due to aging were recorded using appropriate polymer characterization methods, such as differential scanning calorimetry, Fourier transform infrared spectroscopy, gel permeation chromatography, X-ray photoelectron spectroscopy, and microscopy.
Pellets were exposed to water containing BTEX and the ethers at 130-190 mg/L for up to two weeks.
Aqueous sorbate concentrations were determined by headspace gas chromatography. Sorption to the polymers was correlated with the sorbate's Kow and was significant for BTEX and marginal for the ethers.
Due to substantially lower glass transition temperatures, PP showed higher sorption than PS. Aging had no effect on the sorption behavior of PP. PS sorbed less BTEX after aging due to an oxidized surface layer.
Construction products are in contact with water (e.g., rain, seepage water) during their service lifetime and may release potentially harmful compounds by leaching processes. Monitoring studies showed that compounds attributed to construction products are found in storm water and the receiving bodies of water and that the release of biocides in urban areas can be comparable to the input of pesticides from agricultural uses. Therefore, a prospective risk assessment of such products is necessary. Laboratory leaching tests have been developed by the Technical Committee CEN/TC 351 and are ready to use. One major task in the future will be the evaluation of the leaching test results, as concentrations found in laboratory experiments are not directly comparable to the field situations. Another Task will be the selection of compounds to be considered for construction products, which are often a complex mixture and contain additives, pigments, stabilization agents, etc. The formulations of the products may serve as a starting point, but total content is a poor predictor for leachability, and analysis of the eluates is necessary. In some cases, nontargeted approaches might be required to identify compounds in the eluates. In the identification process, plausibility checks referring to available information should be included. Ecotoxicological tests are a complementary method to test eluates, and the combined effects of all compounds—including Degradation products—are included. A bio test battery has been applied in a round robin test and was published in a guidance document. Published studies on the ecotoxicity of construction products show the tests’ suitability to distinguish between products with small and larger effects on the environment.