4 Material und Umwelt
Filtern
Erscheinungsjahr
- 2022 (117) (entfernen)
Dokumenttyp
Referierte Publikation
- nein (117) (entfernen)
Schlagworte
- Biocides (14)
- Antimicrobial resistance (10)
- Klärschlamm (6)
- Phosphorrückgewinnung (5)
- Risk assessment (5)
- Antimicrobial coating (4)
- Archäometrie (4)
- Biofilms (4)
- Disinfection (4)
- Evolution (4)
- PFAS (4)
- XANES spectroscopy (4)
- Anerkennungen (3)
- Bacteria (3)
- Bauprodukte (3)
- Biocide tolerance (3)
- Cascade impactor (3)
- EN 16516 (3)
- Horizontal gene transfer (3)
- ISO 16000-6 (3)
- Laser-induced periodic surface structures (LIPSS) (3)
- Leaching (3)
- Mutation rate (3)
- Nano (3)
- Per- and Polyfluoroalkyl substances (PFAS) (3)
- Persistence (3)
- Phosphor (3)
- Ringversuch (3)
- Rostasche (3)
- Standardization (3)
- Transformation (3)
- VOC (3)
- VVOCs (3)
- Wastewater (3)
- Zement (3)
- Zulassungen (3)
- Abdichtungssystem (2)
- Abfallverbrennung (2)
- Affinity chromatography (2)
- Analytical method (2)
- Antibodies (2)
- Antimicrobial surfaces (2)
- Bacterial adhesion tests (2)
- Biocide (2)
- Biozide (2)
- Cairo Genizah (2)
- Capsules (2)
- Carbon steel corrosion (2)
- Combustion ion chromatography (2)
- Deponie (2)
- Diffusive sampling (2)
- Düngemittel (2)
- Dünger (2)
- Fungus (2)
- Glutaraldehyde (2)
- Herculaneum (2)
- Heterogeneity (2)
- IAQ (2)
- Ink analyses (2)
- Ir DNA staining approach (2)
- Klärschlammverordnung (2)
- Light (2)
- Material emissions (2)
- Melanin (2)
- Method development (2)
- Microbiological influenced corrosion MIC (2)
- Middle Ages (2)
- Mikroplastik (2)
- Passive sampling (2)
- Perceived Intensity (2)
- Phosphorus recovery (2)
- Polyglycerol (2)
- Recycling (2)
- Reductive amination (2)
- Reference materials (2)
- Reproduzierbarkeit (2)
- Resistance (2)
- Richtlinien (2)
- Sc-ICP-ToF-MS (2)
- Schutzschichten (2)
- Sewage sludge (2)
- Single cell (2)
- Soil (2)
- Stress (2)
- Thermal extraction (2)
- Tolerance (2)
- UFP (2)
- Uptake rate (2)
- X-Ray fluorescence analyses (2)
- XRF (2)
- Zeichenmaterialien (2)
- Zerstörungsfreie Prüfung (2)
- Aerosol (1)
- Affinity extraction (1)
- Affinity support (1)
- Ageing (1)
- Air quality monitoring (1)
- Aluminum oxide (1)
- Amate (1)
- Amino acid analysis (1)
- Analytische Methode (1)
- Antiadhesive surfaces (1)
- Antibiotic resisitance (1)
- Antibody purification (1)
- Antimikrobielle Resistenz (1)
- Antimony black (stibnite) (1)
- Antmikrobielle Oberflächen (1)
- Aquatische Toxizität (1)
- Aromatic amino acid analysis AAAA (1)
- Aromatic amino acid analysis aaaa (1)
- Ashdec (1)
- Atomic force microscopy (1)
- Autoclave tests (1)
- Autoklaventest (1)
- BOFS (1)
- BSA (1)
- Bacteria repellent surfaces (1)
- Bacteria-repellent surfaces (1)
- Basin (1)
- Bauhaus Weimar (1)
- Behördenklausurtagung (1)
- Bewertungsverfahren (1)
- Bio-weathering (1)
- Bioconjugation (1)
- Biodegradation (1)
- Biofilm growth (1)
- Biological pest control (1)
- Bioseparation (1)
- Biozid (1)
- Black fungi (1)
- Bottom ash (1)
- Bovine serum albumin (1)
- Building product (1)
- Bundesoberbehörden (1)
- CIC (1)
- Carrier (1)
- Cast iron (1)
- Chamber test (1)
- Combustion Ion Chromatography (1)
- Construction products (1)
- Controllable gene expression (1)
- Cribellate spiders (1)
- Cross-resistance (1)
- Cubical shape (1)
- Cultural heritage (1)
- DHN melanin (1)
- DIN (1)
- DIN EN 350 (1)
- Dauerhaftigkeit (1)
- Desiccation (1)
- Digitalisierung (1)
- Domestikation (1)
- Downstream processing (1)
- Dry treatment (1)
- E. coli (1)
- EOF (1)
- ESEM (1)
- Ecotoxicity (1)
- Effective uptake rate (1)
- Electron microscopy (1)
- Elektronisches Laborbuch (1)
- Elektroofenstaub (1)
- Element mass concentration (1)
- Emission (1)
- Emission reference materials (1)
- Emission test chamber (1)
- Emission test chamber procedure (1)
- Emissionen (1)
- Emissions (1)
- Ersatzbaustoffe (1)
- Ersatzbaustoffverordnung (1)
- Essential oils (1)
- Experimental evolution (1)
- Exposure risk (1)
- Extremotolerance (1)
- FFF-3D-Printer (1)
- Fassadenfarbe (1)
- Fassadenfarben (1)
- Fertilizer (1)
- Festlegungen (1)
- Fluor XANES (1)
- Fluorescent proteins (1)
- Force distance curve (1)
- Fungal biofilms (1)
- Genetic engineering (1)
- Genetic tools (1)
- Genetics (1)
- Genome editing (1)
- Geokunststoffe (1)
- Geosynthetics (1)
- Geruch (1)
- Geruchsmessung (1)
- Gichtgasschlamm (1)
- Giulio Romano (1)
- Gleichwertigkeit Messverfahren (1)
- Heavy metal removal (1)
- Hi-Tension (1)
- Holy Family (1)
- Holzschutz (1)
- Holzschutz, (1)
- Human plasma (1)
- Hydraulic reactivity (1)
- Hyperbranched polymer (1)
- ICP-MS (1)
- IPM in museums (1)
- ISO22196 (1)
- Igg (1)
- Immunoglobulins (1)
- Immunoprecipitation (1)
- Indoor emission (1)
- Industrial applications (1)
- Ink (1)
- Iron oxide (1)
- Klimaneutralität (1)
- Klärschlammasche (1)
- Knufia petricola (1)
- Kreislaufwirtschaft (1)
- Kunstrasen (1)
- Kunststoffsportbeläge (1)
- Library pests (1)
- Life history data (1)
- Linker (1)
- MIC (1)
- Manuscript studies (1)
- Manuskripte (1)
- Mechanochemical treatment (1)
- Microbial abundance (1)
- Microbiologically influenced corrosion (MIC) (1)
- Microcolonial fungi (1)
- Municipal solid waste (1)
- Nano CRM (1)
- Nanomaterial (1)
- Nanoparticle (1)
- Nassaufbereitung (1)
- Natural abundance of 15N (1)
- Nitrogen (1)
- Nitrogen fixation (1)
- Nitrogen uptake (1)
- Norm (1)
- Nuclear waste disposal (1)
- Nährstoffe (1)
- OECD (1)
- Odour (1)
- PFAS analysis (1)
- Paints (1)
- Papier (1)
- Papyrus (1)
- Particles (1)
- Pentimenti (1)
- Periodate oxidation (1)
- Phosphonic acids (1)
- Phosphor-Rückgewinnung (1)
- Phosphorus (1)
- Photoperception (1)
- Pigments (1)
- Polymer (1)
- Polymer foils (1)
- Portland Cement (1)
- Portrayal of St Joseph (1)
- Projekte (1)
- Protein (1)
- Protein a (1)
- Protein hydrolysis (1)
- Protein immobilization (1)
- Protein quantification (1)
- Purification (1)
- QA/QC (1)
- Quality assurance (1)
- Raman spectroscopy (1)
- Raphael school (1)
- Reference material (1)
- Reference nanoparticles (1)
- Reflectography (1)
- Rembrandt (1)
- Ressourcenrückgewinnung (1)
- Reworking (1)
- Rhizosphere (1)
- Risikobewertung (1)
- Risk assesment (1)
- Rock-inhabiting black fungi (1)
- Rock-inhabiting fungus (1)
- Rotschlamm (1)
- Round robin test (1)
- Rückgewinnung (1)
- SAXS (1)
- SDS-PAGE (1)
- Sapphire (1)
- Schadstofftransfer (1)
- Schlacke (1)
- Sekundärrohstoff (1)
- Sekundärrohstoffe (1)
- Selection (1)
- Self-assembled monolayer (SAM) (1)
- Sewage sludge ash (1)
- Sewage sludge incineration (1)
- Signal transduction (1)
- Sixteenth-century painting technique (1)
- Size (1)
- Solid phase (1)
- Standardarbeitsanweisungen (1)
- Standardisierung (1)
- Sum parameter analysis (1)
- Surface functionalization (1)
- TEM (1)
- TXRF (1)
- Termite control (1)
- Test guideline (1)
- Test method (1)
- Thermische Abfallbehandlung (1)
- Thermochemische Prozesse (1)
- Tyrosine (1)
- Ultrafine particles (1)
- Umwelt (1)
- Umweltbewertung (1)
- Umweltsimulation (1)
- Umweltverträglichkeit (1)
- VOC-Emission (1)
- Vasari (1)
- Versuchskampagne (1)
- Volatile organic compound (1)
- Volatile organic compounds (1)
- Volatile organic compounds (VOC) (1)
- Wiederholbarkeit (1)
- Wood protection (1)
- Workflows (1)
- X-ray absorption near-edge structure (XANES) spectroscopy (1)
- X-ray diffraction (1)
- Zeichnungen (1)
- Zinc (1)
- Zink (1)
- biocide tolerance (1)
- disinfection (1)
- evolution (1)
- individual-based modelling (1)
- infrared spectroscopy (1)
- ink (1)
- papyrus (1)
- thermochemische Behandlung (1)
- Ökotoxizität (1)
- Ökotoxtests (1)
Organisationseinheit der BAM
- 4 Material und Umwelt (117)
- 4.1 Biologische Materialschädigung und Referenzorganismen (31)
- 4.3 Schadstofftransfer und Umwelttechnologien (28)
- 4.2 Material-Mikrobiom Wechselwirkungen (21)
- 4.4 Thermochemische Reststoffbehandlung und Wertstoffrückgewinnung (16)
- 4.0 Abteilungsleitung und andere (13)
- 4.5 Kunst- und Kulturgutanalyse (10)
- 6 Materialchemie (8)
- 1 Analytische Chemie; Referenzmaterialien (5)
- 3 Gefahrgutumschließungen; Energiespeicher (5)
Eingeladener Vortrag
- nein (61)
Per- und polyfluorierte Alkylsubstanzen (PFAS) im Klärschlamm - Analytische Methoden und Grenzwerte
(2022)
Per- und Polyfluoralkylsubstanzen (PFAS) sind eine Gruppe von mehr als 4700 anionischen und kationischen anthrophonen Stoffen, die aufgrund ihrer inerten chemischen Stabilität und ihrer Widerstandsfähigkeit gegen den Abbau durch Hitze oder Säuren in einer Vielzahl von Produkten verwendet werden. Infolge der ständigen Verwendung, vor allem in Feuerlöschschäumen für die Luftfahrt, wurden in Tausenden von Industrie- und Militäranlagen kontaminierte Böden und Grundwasservorkommen gefunden. Aufgrund der ständigen Verwendung von fluorierten Konsumgütern haben sich jedoch auch Abwässer und Klärschlamm aus Kläranlagen als Quelle für die Kontamination der aquatischen Umwelt mit PFAS erwiesen. Infolge der strengeren Vorschriften und Beschränkungen, die in den letzten Jahren für die Verwendung langkettiger (≥C8) PFAS erlassen wurden, findet in der chemischen Industrie eine deutliche Verlagerung hin zur Herstellung kurz- (C4-C7) und ultrakurzkettiger (C1-C3) Alternativen statt. Mit der Novellierung der Klärschlammverordnung im Jahr 2017 hat der deutsche Gesetzgeber die Ausbringung von Klärschlamm auf landwirtschaftlichen Flächen verboten, und bis 2029/2032 wird die Ausbringung von Klärschlamm in der Landwirtschaft vollständig verboten sein. Während die Belastung der Umwelt mit organischen Schadstoffen wie PFAS, Pestiziden und Arzneimitteln nicht mehr erwünscht ist, muss Phosphor (P) aus Klärschlamm weiterhin zur Herstellung hochwertiger P-Dünger für eine Kreislaufwirtschaft genutzt werden. Derzeit können pflanzenverfügbare P-Düngemittel aus Klärschlamm/Abwasser mit verschiedenen Behandlungsmethoden hergestellt werden, darunter Fällung, Auslaugung und thermische Behandlung. Der Verbleib von PFAS bei der Auslaugung, Ausfällung und Behandlung von Klärschlamm und Abwasser ist jedoch noch weitgehend unbekannt.
Per- and polyfluoroalkyl substances (PFAS) are a group of anionic, cationic and zwitterionic synthetic products, in which the hydrogen atoms on the carbon skeleton of at least one carbon atom have been completely replaced by fluorine atoms and which include more than 4730 compounds, depending on the definition. As a result of continuous and prolific use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil, groundwater and surface water. As a result of the perpetual use of PFAS containing products, effluents and sewage sludge from wastewater treatment plants (WWTPs) have been observed to be an important pathway for PFAS into the environment. In Germany, phosphorus and other nutrients from sewage sludge and wastewater should be recycled in WWTPs of cities with a large population. However, it is not clear if PFAS contamination from wastewater and sewage sludge end up in novel wastewater-based fertilizers. Normally, PFAS are analyzed using PFAS protocols typically with liquid chromatography tandem mass spectrometry (LC-MS/MS) quantification. To get a better overview of the amount of “total PFAS,” we applied sum parameter methods based on combustion ion chromatography (CIC) to screen the PFAS contaminations in various sewage sludge and wastewater-based fertilizers. Furthermore, current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Only a subsequent, high-energy consuming pyrolysis process guarantees the total destruction of all fluorinated organic contaminants. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem.
Per- and polyfluoroalkyl substances (PFAS) are a large group of organofluorine surfactants used in the formulations of thousands of consumer goods, including aqueous film-forming foams (AFFF) used to suppress aviation fires in training scenarios, non-stick cookware, fast-food wrappers, water-repellent fabrics, medical equipment, and plastic and leather products. As a result of the perpetual use of PFAS containing products, effluents and sewage sludge from wastewater treatment plants (WWTPs) have been observed to be an important pathway for PFAS into the environment. In Germany, phosphorus and other nutrients from sewage sludge and wastewater should be recycled in WWTPs of cities with a large population. However, it is not clear if PFAS contamination from wastewater and sewage sludge end up in novel wastewater-based fertilizers. Normally, PFAS are analyzed using PFAS protocols typically with time-consuming extraction steps and LC-MS-MS quantification. However, for screening of PFAS contaminations in sewage sludge or wastewater-based fertilizers also passive sampler based on the Diffusive Gradients in Thin-films (DGT) technique can be used for the PFAS extraction. Afterwards, combustion ion chromatography (CIC) can be applied to analyse the “total” amount of PFAS on the passive sampler. Here, we show results from the DGT method in comparison to those of the extractable organic fluorine (EOF) method for a variety of wastewater-based fertilizers. Additionally, we analysed the adsorption of PFAS on the weak anion exchanger (WAX) based DGT passive sampler binding layer by infrared and fluorine K-edge X-ray adsorption near-edge structure (XANES) spectroscopy.
Per- and polyfluoroalkyl substances (PFAS) are a large group of anionic, cationic, or zwitterionic organofluorine surfactants used in the formulations of thousands of products and consumer goods, including aqueous film-forming foams (AFFF) used to suppress aviation fires in training scenarios, non-stick cookware, fast-food wrappers, water-repellent fabrics, medical equipment. Because PFAS have been extensively used in a variety of AFFF products they can be found in soils from industrial and military installations. Current decontamination strategies of PFAS-burdened soils mainly consist of adsorption methods using adsorbents for fixation of PFAS in the ground. A second option is the utilization of a “pump and treat” process, cycling polluted soils through a washing plant leading to the concentration of the pollutants in the fine fraction. Only a subsequent, high-energy consuming pyrolysis process guarantees the total destruction of all fluorinated organic contaminants. Both approaches are cost-intensive and not intended for the direct decomposition of all PFAS contaminants. Hence, there is a great demand for innovative developments and chemical treatment technologies, dealing with new strategies of tackling the PFAS problem. Previously, mechanochemical treatment of polychlorinated organic compounds in soils showed an efficient dechlorination. Thus, we investigated mechanochemical treatment of PFAS contaminated soils with various additives in a ball mill and analyzed the PFAS defluorination with gas chromatography mass spectrometry (GCMS) and liquid chromatography tandem mass spectrometry (LC-MS/MS), respectively, as well es the fluoride mineralization by ion chromatography (IC) and fluorine K-edge X-ray absorption near-edge structure (XANES) spectroscopy.
Per- and polyfluoroalkyl substances (PFAS) are a group of more than 4700 anionic and cationic anthrophonic substances which have been used extensively in a variety of products and industries due to their inert chemical stability and resistance to degradation by heat or acids. As a result of continuous use, mainly in aviation firefighting foams, thousands of industrial and military installations have been found to contain contaminated soil and groundwater resources. However, because of the continuous use of fluorinated consumer products, also effluents and sewage sludge from wastewater treatment plants (WWTPs) have been shown to be an important source of PFAS contamination into the aquatic environment. Resulting from recent stricter regulations and restrictions in the last years on the use of long chain (≥C8) PFAS, there is a significant shift in the chemical industry towards production of short (C4-C7) and ultrashort (C1-C3) chain alternatives. With the amendment of the Sewage Sludge Ordinance in 2017 the German legislation banned sewage sludge application on agricultural land, and by 2029/2032 sewage sludge will be completely prohibited from agricultural application. While environmental exposure of organic pollutants like PFAS, pesticides and pharmaceuticals are no longer desirable, phosphorus (P) from sewage sludge must still be used to produce high-quality P-fertilizers for a circular economy. Currently, plant-available P-fertilizers from sewage sludge/wastewater can be produced using a variety of treatment approaches including precipitation, leaching, and thermal treatment. However, the fate of legacy and emerging PFAS compounds during P leaching, precipitation and treatment from sewage sludge and wastewater is for the most parts still unknown.
Nonporous corundum powder was functionalized covalently with protein binders to isolate and enrich specific proteins from complex matrices.The common crosslinker glutaraldehyde was compared with a hyperbranched polyglycerol (PG) of around 10 kDa. The latter was oxidized with periodate to generate aldehyde groups that can covalently react with the amines of the surface and the amino groups from the protein via a reductive amination process. The amount of bound protein was quantified via aromatic amino acid analysis (AAAA). As a proof of concept, IgG was extracted with protein A from crude human plasma. The advantages of corundum include the very low price, extremely high physical and chemical stability, pressure resistance, favorable binding kinetics, convenient handling, and flexible application.
Nonporous corundum powder, known as an abrasive material in the industry, was functionalized covalently with protein binders to isolate and enrich specific proteins from complex matrices. The materials based on corundum were characterized by TEM, ESEM, BET, DLS, and zeta potential measurements. The strong Al-O-P bonds between the corundum surface and amino phosphonic acids are used to introduce functional groups for further conjugations. The common cross-linker glutaraldehyde was compared with a hyperbranched polyglycerol (PG) of around 10 kDa. The latter is oxidized with periodate to generate aldehyde groups that can covalently react with the amines of the surface and the amino groups from the protein via a reductive amination process. The amount of bound protein was quantified via aromatic amino acid analysis (AAAA). This work shows that oxidized polyglycerol can be used as an alternative to glutaraldehyde. With polyglycerol, more of the model protein bovine serum albumin (BSA) could be attached to the surface under the same conditions, and lower nonspecific binding (NSB) was observed. As a proof of concept, IgG was extracted with protein A from crude human plasma. The purity of the product was examined by SDS-PAGE. A binding capacity of 1.8 mg IgG per g of corundum powder was achieved. The advantages of corundum are the very low price, extremely high physical and chemical stability, pressure resistance, favorable binding kinetics, and flexible application.
11 laser printers from 5 manufacturers were purchased in 2017 and tested for their UFP emissions. Size resolved sampling of the emitted particles was done with a 13 stage (30 nm to 10 µm) low pressure cascade impactor. The sampled particles were analysed for their chemical composition by thermal extraction (vaporization at 290°C) followed by GC-MS analysis. High boiling cyclic siloxanes (D10 to D16) were detected as constituents of UFP from laser printers. In comparison to measurements in 2008, aliphatic long-chain alkanes (C22 to C34) were detected additionally as chemical constituents of UFP from most of the tested printers and their amounts were higher than for cyclic siloxanes. Printers of one manufacturer showed very low UPF emissions compared to the other manufacturers.
11 laser printers from 5 manufacturers were purchased in 2017 and tested for their UFP emissions. Size resolved sampling of the emitted particles was done with a 13 stage (30 nm to 10 µm) low pressure cascade impactor. The sampled particles were analysed for their chemical composition by thermal extraction (vaporization at 290°C) followed by GC-MS analysis. High boiling cyclic siloxanes (D10 to D16) were detected as constituents of UFP from laser printers. In comparison to measurements in 2008, aliphatic long-chain alkanes (C22 to C34) were detected additionally as chemical constituents of UFP from most of the tested printers and their amounts were higher than for cyclic siloxanes. Printers of one manufacturer showed very low UPF emissions compared to the other manufacturers.
Der Fachbeirat kommt bereits seit 13 Jahren in seiner jetzigen Form zusammen, um Zulassungsrichtlinien, weitere Dokumente und fachliche Fragestellungen zu beraten. Die Zeit bringt auch personelle Veränderungen mit sich, darüber wollen wir berichten. Derzeit wird die Zulassungsrichtlinie für Schutzschichten im Fachbeirat und in seiner Arbeitsgruppe Geotextilien und Kunststoff Dränelemente (AG Geotextilien) überarbeitet. Zudem wurde die Zulassungsrichtlinie für Kunststoffdichtungsbahnen auf den aktuellen Stand der Regelsetzung und Normung gebracht. Bestimmte Medien, die hier bei einigen Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Hier werden die Hintergründe und Zusammenhänge in Kürze aufgezeigt. Zuletzt wird die Diskussion in Bezug auf den Einsatz von Rezyklaten in den zugelassenen Produkten aufgeführt.
Der Fachbeirat kommt bereits seit 13 Jahren in seiner jetzigen Form zusammen, um Zulassungsrichtlinien, weitere Dokumente und fachliche Fragestellungen zu beraten. Die Zeit bringt auch personelle Veränderungen mit sich, darüber wollen wir berichten. Derzeit wird die Zulassungsrichtlinie für Schutzschichten im Fachbeirat und in seiner Arbeitsgruppe Geotextilien und Kunststoff Dränelemente (AG Geotextilien) überarbeitet. Zudem wurde die Zulassungsrichtlinie für Kunststoffdichtungsbahnen auf den aktuellen Stand der Regelsetzung und Normung gebracht. Bestimmte Medien, die hier bei einigen Prüfungen verwendet werden, dürfen nicht mehr in der EU in Verkehr gebracht werden. Hier werden die Hintergründe und Zusammenhänge in Kürze aufgezeigt. Zuletzt wird die Diskussion in Bezug auf den Einsatz von Rezyklaten in den zugelassenen Produkten aufgeführt.
Antibiotic resistance is a growing global problem which poses a massive threat to human health. Although human activity contributes to the acceleration of the process, bacteria have a self-driven stabilisation mechanism to protect themselves from such and other external threats: biofilm formation. Nonetheless, it is the adhesion of a single bacterial cell to a surface that triggers the formation of such network of biomolecules and microorganisms, as well as its hazardous consequences. The main objective of this work was to quantify the adhesion force of a single E. coli cell on a Ti substrate via the AFM-related single-cell force spectroscopy, with both the cell and the substrate material being of high clinical relevance. A set of 25 x 25 force displacement curves was acquired with a maximum force of 3.2 nN without dwell time, yielding a topography map and an adhesion force map that showed to be correlated. A mean adhesion force of 0.85 ± 0.175 nN was measured and the presence of cell appendages on the bacterial cell wall was verified through individual force-displacement curves. Bacterial viability was assessed after the measurements via live/dead staining.
Die Publikation befasst sich mit einer einzigartigen Sammlung mexikanischer und südamerikanischer Handschriften, die zu Beginn des 19. Jahrhunderts ins Leben gerufen wurde, als Alexander von Humboldt der Königlichen Bibliothek zu Berlin Fragmente indigener mexikanischer Bilderhandschriften aus dem 16. Jahrhundert schenkte. Sie sind heute auch unter der Bezeichnung Humboldt-Fragmente bekannt und stellen den bedeutendsten Teil der Sammlung dar, die im Laufe der Zeit durch den Ankauf verschiedener Arten von Handschriften aus Mittelamerika, vorwiegend in indigenen Sprachen und lateinischer Schrift, erweitert wurde.
In den zwei Jahren von April 2017 bis März 2019 verfolgten die Staatsbibliothek zu Berlin – Preußischer Kulturbesitz (SBB-PK) und die Bundesanstalt für Materialforschung und -prüfung (BAM) ein gemeinsames, von der Deutschen Forschungsgemeinschaft (DFG) großzügig gefördertes wissenschaftliches Projekt: Materialanalysen und kulturgeschichtliche Untersuchungen mexikanischer Handschriften aus der Kolonialzeit in Berlin und Krakau.
Die Hauptziele des Projekts bestanden darin, die Provenienz der Manuscripta americana zu ermitteln und, da sie einen hohen Grad an Fragmentierung aufweisen, festzustellen, wie sie untereinander und mit Objekten außerhalb der Sammlung in Beziehung stehen. Zu diesem Zweck wurden ethno-kulturhistorische und naturwissenschaftliche Methoden kombiniert. Dank einer guten Zusammenarbeit mit der Jagiellonen-Bibliothek konnten wir die Manuscripta americana sowohl in Berlin als auch in Krakau sehen und studieren und sie wissenschaftlich vermessen.